USGS Science⌕ Search

SEARCH · USGS Science

Results for “Open Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28Linked to original sources

The Quaternary Silver Creek Fault Beneath the Santa Clara Valley, California

The northwest-trending Silver Creek Fault is a 40-km-long strike-slip fault in the eastern Santa Clara Valley, California, that has exhibited different behaviors within a changing San Andreas Fault system over the past 10-15 Ma. Quaternary alluvium several hundred meters thick that buries the northern half of the Silver Creek Fault, and that has been sampled by drilling and imaged in a detailed seismic reflection profile, provides a record of the Quaternary history of the fault. We assemble evidence from areal geology, stratigraphy, paleomagnetics, ground-water hydrology, potential-field geophysics, and reflection and earthquake seismology to determine the long history of the fault in order to evaluate its current behavior. The fault formed in the Miocene more than 100 km to the southeast, as the southwestern fault in a 5-km-wide right step to the Hayward Fault, within which the 40-km-long Evergreen pull-apart basin formed. Later, this basin was obliquely cut by the newly recognized Mt. Misery Fault to form a more direct connection to the Hayward Fault, although continued growth of the basin was sufficient to accommodate at least some late Pliocene alluvium. Large offset along the San Andreas-Calaveras-Mt Misery-Hayward Faults carried the basin northwestward almost to its present position when, about 2 Ma, the fault system was reorganized. This led to near abandonment of the faults bounding the pull-apart basin in favor of right slip extending the Calaveras Fault farther north before stepping west to the Hayward Fault, as it does today. Despite these changes, the Silver Creek Fault experienced a further 200 m of dip slip in the early Quaternary, from which we infer an associated 1.6 km or so of right slip, based on the ratio of the 40-km length of the strike-slip fault to a 5-km depth of the Evergreen Basin. This dip slip ends at a mid-Quaternary unconformity, above which the upper 300 m of alluvial cover exhibits a structural sag at the fault that we interpret as a negative flower structure. This structure implies some continuing strike slip on the Silver Creek Fault in the late Quaternary as well, with a transtensional component but no dip slip. Our only basis for estimating the rate of this later Quaternary strike slip on the Silver Creek Fault is to assume continuation of the inferred early Quaternary rate of less than 2 mm/yr. Faulting evident in a detailed seismic reflection profile across the Silver Creek Fault extends up to the limit of data at a depth of 50 m and age of about 140 ka, and the course of Coyote Creek suggests Holocene capture in a structural depression along the fault. No surface trace is evident on the alluvial plain, however, and convincing evidence of Holocene offset is lacking. Few instrumentally recorded earthquakes are located near the fault, and those that are near its southern end represent cross-fault shortening, not strike slip. The fault might have been responsible, however, for two poorly located moderate earthquakes that occurred in the area in 1903. Its southeastern end does mark an abrupt change in the pattern of abundant instrumentally recorded earthquakes along the Calaveras Fault-in both its strike and in the depth distribution of hypocenters-that could indicate continuing influence by the Silver Creek Fault. In the absence of convincing evidence to the contrary, and as a conservative estimate, we presume that the Silver Creek Fault has continued its strike-slip movement through the Holocene, but at a very slow rate. Such a slow rate would, at most, yield very infrequent damaging earthquakes. If the 1903 earthquakes did, in fact, occur on the Silver Creek Fault, they would have greatly reduced the short-term future potential for large earthquakes on the fault.

Open-File Report↗

Ground-water data as of 1967, Central Coastal Subregion, California

Most usable ground water in the predominantly mountainous Central Coastal Subregion occurs in alluvium-filled valleys and coastal plains and in deeper aquifers of Quaternary and Tertiary age. The intervening mountainous areas are underlain by consolidated sedimentary, igneous, and metamorphic rocks, mainly of Mesozoic age. These older rocks contain only small quantities of recoverable ground water and, therefore, are not considered a major source of ground water. In the Central Coastal Subregion, 24 basins have been identified as significant sources of ground water. The total area of the 24 basins is about 3,500 square miles. The water-bearing deposits range in thickness from about 200 to 4,000 feet. Depending on local conditions, recharge infiltrates at rates of less than 1½ feet per day to more than 10 feet per day in the upper part of alluvial fans and stream channels and at the outcrops of the deeper aquifers. The maximum measured depth to water in the water-bearing deposits is 568 ft. In several valleys there are flowing wells. Total storage capacity of 16 of the basins is more than 20,000,000 acre-feet . The usable storage capacity of 18 of the basins is more than 7,600,000 acre-feet; the limiting factors are sea-water intrusion and high pumping lift. Ground-water temperature ranges from about 55° to about 75°F . The dissolved-solids content of the water is generally less than 800 parts per million, but locally is more than 11,000 parts per million. The predominant water type is calcium bicarbonate, but sodium, magnesium, sulfate, and chloride are present locally in significant quantities. Properly constructed wells in some areas can yield 425 gallons per minute.

California↗

Digital data sets that describe aquifer characteristics of the Rush Springs Aquifer in western Oklahoma

This diskette contains digitized aquifer boundaries and maps of hydraulic conductivity, recharge, and ground-water level elevation contours for the Rush Spring aquifer in western Oklahoma. This area encompasses all or part of Blaine, Caddo, Canadian, Comanche, Custer, Dewey, Grady, Stephens, and Washita Counties. These digital data sets were developed by Mark F. Becker to use as input into a computer model that simulated ground-water flow in the Rush Springs aquifer (Mark F. Becker, U.S. Geological Survey, written commun., 1997). For the purposes of modeling the ground-water flow in the Rush Springs aquifer, Mark F. Becker (written commun., 1997) defined the Rush Springs aquifer to include the Rush Springs Formation, alluvial and terrace deposits along major streams, and parts of the Marlow Formations, particularly in the eastern part of the aquifer boundary area. The Permian-age Rush Springs Formation consists of highly cross-bedded sandstone with some interbedded dolomite and gypsum. The Rush Springs Formation is overlain by Quaternary-age alluvial and terrace deposits that consist of unconsolidated clay, silt, sand, and gravel. The Rush Springs Formation is underlain by the Permian-age Marlow Formation that consists of interbedded sandstones, siltstones, mudstones, gypsum-anhydrite, and dolomite beds (Mark F. Becker, written commun., 1997). The parts of the Marlow Formation that have high permeability and porosity are where the Marlow Formation is included as part of the Rush Springs aquifer. The Rush Springs aquifer underlies about 2,400 square miles of western Oklahoma and is an important source of water for irrigation, livestock, industrial, municipal, and domestic use. Irrigation wells are reported to have well yields greater than 1,000 gallons per minute (Mark F. Becker, written commun., 1997). Mark F. Becker created some of the aquifer boundaries, hydraulic conductivity, and recharge data sets by digitizing parts of previously published surficial geology maps. The hydraulic conductivity and recharge values are the input data to the ground-water flow model (Mark F. Becker, written commun., 1997). The water-level elevation data set was prepared at a scale of 1:250,000 by Mark F. Becker (written commun., 1997) from water levels measured in wells prior to the year 1950. Ground-water flow models are numerical representations that simplify and aggregate natural systems. Models are not unique; different combinations of aquifer characteristics may produce similar results. Therefore, values of hydraulic conductivity and recharge used in the model and presented in this data set are not precise, but are within a reasonable range when compared to independently collected data.

Oklahoma↗

Sediment geochemical records of productivity and oxygen depletion along the margin of western North America during the past 60,000 years: Teleconnections with Greenland Ice and the Cariaco Basin

Many sediment records from the margins of the Californias (Alta and Baja) collected in water depths between 60 and 1200 m contain anoxic intervals (laminated sediments) that can be correlated with interstadial intervals as defined by the oxygen-isotope composition of Greenland ice (Dansgaard–Oeschger, D–O, cycles). These intervals include all or parts of Oxygen Isotope Stage 3 (OIS3; 60–24 cal ka), the Bölling/Alleröd warm interval (B/A; 15–13 cal ka), and the Holocene. This study uses organic carbon (Corg) and trace-element proxies for anoxia and productivity, namely elevated concentrations and accumulation rates of molybdenum and cadmium, in these laminated sediments to suggest that productivity may be more important than ventilation in producing changes in bottom-water oxygen (BWO) conditions on open, highly productive continental margins. The main conclusion from these proxies is that during the last glacial interval (LGI; 24–15 cal ka) and the Younger Dryas cold interval (YD; 13–11.6 cal ka) productivity was lower and BWO levels were higher than during OIS3, the B/A, and the Holocene on all margins of the Californias. The Corg and trace-element profiles in the LGI–B/A–Holocene transition in the Cariaco Basin on the margin of northern Venezuela are remarkably similar to those in the transition on the northern California margin. Correlation between D–O cycles in Greenland ice with gray-scale measurements in varved sediments in the Cariaco Basin also is well established. Synchronous climate-driven changes as recorded in the sediments on the margins of the Californias, sediments from the Cariaco Basin, and in the GISP-2 Greenland ice core support the hypothesis that changes in atmospheric dynamics played a major role in abrupt climate change during the last 60 ka. Millennial-scale cycles in productivity and oxygen depletion on the margins of the Californias demonstrate that the California Current System was poised at a threshold whereby perturbations of atmospheric circulation produced rapid changes in circulation in the eastern North Pacific Ocean. It is likely that the Pacific and Atlantic Oceans were linked through the atmosphere. Warmer air temperatures during interstadials would have strengthened Hadley and Walker circulations, which, in turn, would have strengthened the subtropical high pressure systems in both the North Pacific and the North Atlantic, producing increased rainfall over the Cariaco Basin and increased upwelling along the margins of the Californias.

California↗

A 3-Dimensional Model of Water-Bearing Sequences in the Dominguez Gap Region, Long Beach, California

A 3-dimensional computer model of the Quaternary sequence stratigraphy in the Dominguez gap region of Long Beach, California has been developed to provide a robust chronostratigraphic framework for hydrologic and tectonic studies. The model consists of 13 layers within a 16.5 by 16.1 km (10.25 by 10 mile) square area and extends downward to an altitude of -900 meters (-2952.76 feet). Ten sequences of late Pliocene to Holocene age are identified and correlated within the model. Primary data to build the model comes from five reference core holes, extensive high-resolution seismic data obtained in San Pedro Bay, and logs from several hundred water and oil wells drilled in the region. The model is best constrained in the vicinity of the Dominguez gap seawater intrusion barrier where a dense network of subsurface data exist. The resultant stratigraphic framework and geologic structure differs significantly from what has been proposed in earlier studies. An important new discovery from this approach is the recognition of ongoing tectonic deformation throughout nearly all of Quaternary time that has impacted the geometry and character of the sequences. Anticlinal folding along a NW-SE trend, probably associated with Quaternary reactivation of the Wilmington anticline, has uplifted and thinned deposits along the fold crest, which intersects the Dominguez gap seawater barrier near Pacific Coast Highway. A W-NW trending fault system that approximately parallels the fold crest has also been identified. This fault progressively displaces all but the youngest sequences down to the north and serves as the southern termination of the classic Silverado aquifer. Uplift and erosion of fining-upward paralic sequences along the crest of the young fold has removed or thinned many of the fine-grained beds that serve to protect the underlying Silverado aquifer from seawater contaminated shallow groundwater. As a result of this process, the potential exists for vertical migration of seawater into the producing aquifers and subsequent landward migration of intruded waters beneath the existing Dominguez barrier. Incipient invasion of the Silverado aquifer by chloride-enriched waters is observed in a recently drilled well located along the crest of the fold seaward of the barrier and at a depth of 440 feet (134 meters). These new observations and interpretations indicate that the new sequence-based approach to defining the stratigraphy of the Dominguez Gap area may have important implications for seawater intrusion management. To test this, it will be useful to overlay existing water-quality and water level data onto the framework model and to incorporate the new stratigraphy into a transport model.

Open-File Report↗

Remote sensing and airborne geophysics in the assessment of natural aggregate resources

Natural aggregate made from crushed stone and deposits of sand and gravel is a vital element of the construction industry in the United States. Although natural aggregate is a high volume/low value commodity that is relatively abundant, new sources of aggregate are becoming increasingly difficult to find and develop because of rigid industry specifications, political considerations, development and transporation costs, and environmental concerns, especially in urban growth centers where much of the aggregate is used. As the demand for natural aggregate increases in response to urban growth and the repair and expansion of the national infrastructure, new sources of natural aggregate will be required. The USGS has recognized the necessity of developing the capability to assess the potential for natural aggregate sources on Federal lands; at present, no methodology exists for systematically describing and evaluating potential sources of natural aggregate. Because remote sensing and airborne geophysics can detect surface and nearsurface phenomena, these tools may useful for detecting and mapping potential sources of natural aggregate; however, before a methodology for applying these tools can be developed, it is necessary to understand the type, distribution, physical properties, and characteristics of natural aggregate deposits, as well as the problems that will be encountered in assessing their potential value. There are two primary sources of natural aggregate: (1) exposed or near-surface igneous, metamorphic, and sedimentary bedrock that can be crushed, and (2) deposits of sand and gravel that may be used directly or crushed and sized to meet specifications. In any particular area, the availability of bedrock suitable for crushing is a function of the geologic history of the area - the processes that formed, deformed, eroded and exposed the bedrock. Deposits of sand and gravel are primarily surficial deposits formed by the erosion, transportation by water and ice, and deposition of bedrock fragments. Consequently, most sand and gravel deposits are Tertiary or Quaternary in age and are most common in glaciated areas, alluvial basins, and along rivers and streams. The distribution of potential sources of natural aggregate in the United States is closely tied to physiography and the type of bedrock that occurs in an area. Using these criteria, the United States can be divided into 12 regions: western mountain ranges, alluvial basins, Columbia Plateau, Colorado Plateau and Wyoming basin, High Plains, nonglaciated central region, glaciated central region, Piedmont Blue Ridge region, glaciated northeastern and Superior uplands, Atlantic and Gulf coastal plain, Hawaiian Islands, and Alaska. Each region has similar types of natural aggregate sources within its boundary, although there may be wide variations in specific physical and chemical characteristics of the aggregates within a region. Conventional exploration for natural aggregate deposits has been largely a ground-based operation (field mapping, sampling, trenching and augering, resistivity), although aerial photos and topographic maps have been extensively used to target possible deposits for sampling and testing. Today, the exploration process also considers other factors such as the availability of the land, space and water supply for processing purposes, political and environmental factors, and distance from the market; exploration and planning cannot be separated. There are many physical properties and characteristics by which aggregate material is judged to be acceptable or unacceptable for specific applications; most of these properties and characteristics pertain only to individual aggregate particles and not to the bulk deposit. For example, properties of crushed stone aggregate particles such as thermal volume change, solubility, oxidation and hydration reactivity, and particle strength, among many others, are important consi

Open-File Report↗

Test well DO-CE 88 at Cambridge, Dorchester County, Maryland

Test well DO-CE 88 at Cambridge, Maryland, penetrated 3,299 feet of unconsolidated Quaternary, Tertiary and Cretaceous sediments and bottomed in quartz-monzonite gneiss. The well was drilled to provide data for a study of the aquifer system of the northern Atlantic Coastal Plain. Twenty-one core samples were collected. Six sand zones were tested for aquifer properties and sampled for ground-water chemistry. Point-water heads were measured at seven depths. Environmental heads (which ranged from -18.33 to +44.16 feet relative to sea level) indicate an upward component of flow. A temperature log showed a maximum temperature of 41.9 degrees Celsius and a mean temperature gradient of 0.00838 degrees Celsius per foot. The water analyses delineated the freshwater-saltwater transition zone between 2,650 and 3,100 feet. The ground water changes progressively downward from a sodium bicarbonate to a sodium chloride character. Clays in the analyzed core samples belong to the montmorillonite and kaolinite groups, and mean cation exchange capacity ranged from 8.3 to 38.9 milliequivalents per 100 grams. Vertical and horizontal hydraulic conductivities measured in cores ranged from 1.5 x 10-s to 1.3 feet per day and from 7.3 x 10-6 to 1.3 feet per day, respectively, but the most permeable sands were not cored. Porosity was 1.5 percent in the quartz monzonite bedrock and ranged from 22.4 to 41 percent in the overlying sediments. Transmissivities from aquifer tests ranged from 25 to 850 feet squared per day, horizontal hydraulic conductivities ranged from 2.5 to 85 feet squared per day, and intrinsic permeabilities ranged from 0.8 to 23 micrometers squared. Fossils identified in core samples include palynomorphs, dinoflagellates, and foraminifers.

Maryland↗

Structure and petroleum potential of the continental margin between Cross Sound and Icy Bay, northern Gulf of Alaska

Major structural features of the Yakutat segment, the segment of the continental margin between Cross Sound and Icy Bay, northern Gulf of Alaska, are delineated by multichannel seismic reflection data. A large structural high is centered on Fairweather Ground and lies generally at the edge of the shelf from Cross Sound to west of the Alsek Valley. A basement uplift, the Dangerous River zone, along which the seismic acoustic basement shallows by up to two kilometers, extends north from the western edge of Fairweather Ground towards the mouth of the Dangerous River. The Dangerous River zone separates the Yakutat segment into two distinct subbasins. The eastern subbasin has a maximum sediment thickness of about 4 km, and the axis of the basin is near and parallel to the coast. Strata in this basin are largely of late Cenozoic age (Neogene and Quaternary) and approximately correlate with the onshore Yakataga Formation. The western subbasin has a maximum of at least 9 km of sediment, comprised of a thick (greater than 4.5 km) Paleogene section overlain by late Cenozoic strata. The Paleogene section is truncated along the Dangerous River zone by a combination of erosion, faulting, and onlap onto the acoustic basement. Within the western subbasin, the late Cenozoic basin axis is near and parallel to the coast, but the Paleogene basin axis appears to trend in a northwest direction diagonally across the shelf. Sedimentary strata throughout the Yakutat shelf show regional subsidence and only minor deformation except in the vicinity of the Fairweather Ground structural high, near and along the Dangerous River zone, and at the shoreline near Lituya Bay. Seismic data across the continental slope and adjacent deep ocean show truncation at the continental slope of Paleogene strata, the presence of a thick (to 6 km) undeformed or mildly deformed abyssal sedimentary section at the base of the slope that in part onlaps the slope, and a relatively narrow zone along the slope or at the base of the slope where faulting may have occurred. Observed deformation at the base of the slope is primarily related to the late Cenozoic uplift of Fairweather Ground, and to Quaternary folding perpendicular to the Pacific-North America relative convergence vector. No accretionary section or major deformation is observed along the continental slope. The absence of these features suggests that no major subduction of the Pacific plate beneath the Yakutat margin has occurred during the late Cenozoic. However, transform faulting along the base of the slope has occurred, because probable Oligocene oceanic basement is juxtaposed against Mesozoic and Paleogene sedimentary strata of the Yakutat slope. This juxtaposition most likely occurred during late Oligocene and Miocene time. During much of the late Cenozoic, and especially during Pliocene-Pleistocene time, the Yakutat segment has apparently been moving northward with the Pacific plate. Dredge samples from the continental slope recovered potential hydrocarbon source and reservoir rocks from the Paleogene sedimentary sequence. Most of the organic matter from these samples is immature to marginally mature. Lopatin calculations suggest that rocks beneath the shelf are likely to be thermally mature at a depth of 4 to 5 km and deeper. In general, the strata at these depths are largely of Paleogene age. Thus, the Paleogene strata may have significant resource potential if source and reservoir rocks similar to those dredged at the slope are present below the shelf. The Paleogene strata are contained primarily within the western subbasin; strata in the east subbasin appear to have little resource potential. Structural traps are apparently present in parts of the basin near and along the Dangerous River zone. These traps are in an updip position from potentially mature strata of the western subbasin, and may hold commercial accumulations of hydrocarbons, if sufficient hydrocarbon generation and migration has occurred

Open-File Report↗

Surficial materials of Massachusetts—A 1:24,000-scale geologic map database

The surficial materials geologic map database defines the distribution of nonlithified earth materials at the land surface in the 189 7.5-minute, 1:24,000-scale quadrangles that cover the Commonwealth of Massachusetts (index map). Across the State, these materials range in thickness from a few feet to more than 500 feet (ft). In some places, surficial materials are absent where bedrock is at the land surface. The geologic map database differentiates surficial materials of Quaternary age on the basis of their lithologic characteristics (such as grain size and sedimentary structures), constructional geomorphic features, stratigraphic relationships, and age. The mapped distribution of surficial materials defines the areas of exposed bedrock and the boundaries between glacial till, glacial stratified deposits, and overlying postglacial deposits at a 1:24,000-scale level of accuracy. Most of the surficial materials in Massachusetts are deposits of the last two continental ice sheets that covered all of New England in the latter part of the Pleistocene ice age. The glacial deposits are divided into two broad categories, glacial till and moraine deposits, and glacial stratified deposits. Widespread till deposits were laid down directly on bedrock or on semi-consolidated coastal plain strata by glacier ice. Tills in thick-till (>15 ft thick) drumlin landforms are found in all parts of the State. Areas of shallow bedrock contain thin discontinuous till deposits and numerous bedrock outcrops, and are located chiefly in rocky upland areas. Moraine deposits related to glacial ice lobes of the last ice sheet are located mostly in southeastern Massachusetts. Glacial stratified deposits are concentrated in valleys and lowland areas and were laid down by glacial meltwater in streams, lakes, and the sea in front of the retreating ice margin during the last deglaciation. Postglacial deposits, primarily flood-plain alluvium and swamp deposits, make up a lesser proportion of the unconsolidated materials. The geodatabase included with this report contains MapUnitPolys, MapUnitOverlayPolys, and OverlayPolys, which show the distribution of geologic units that cover the entire map area and are intended for use at quadrangle scale (1:24,000). These data layers can be clipped by quadrangle or by town boundary. Unlike the units in conventional geologic maps, the digitally defined MapUnitOverlayPolys are arranged in order according to superposition. The polygons for till and bedrock are on the bottom and are overlain by the succeeding stratified deposits; these materials are shown everywhere they occur, including beneath postglacial deposits such as swamp deposits, and also beneath water bodies. The postglacial deposits are on top because these materials overlie the other, older deposits. Instructions for using the digital files are included in the README file. A series of map figures in the pamphlet illustrates the stacking of geologic units in a portion of the Mount Toby quadrangle. The BaseMaps folder contains the 1:24,000-scale topographic base map images (1944–1977 editions) used for this compilation. This report supersedes U.S. Geological Survey Open-File Reports 2006-1260-A, -B, -C, -D, -E, -F, -G, and -I.

Massachusetts↗

Implications for the formation of the Hollywood Basin from gravity interpretations of the northern Los Angeles Basin, California

Gravity data provide insights on the complex tectonic history and structural development of the northern Los Angeles Basin region. The Hollywood basin appears to be a long (> 12 km), narrow (up to 2 km wide) trough lying between the Santa Monica Mountains and the Wilshire arch. In the deepest parts of the Hollywood basin, the modeled average thickness ranges from roughly 250 m if filled with only Quaternary sediments to approximately 600 m if Pliocene sediments are also present. Interpretations of conflicting drill hole data force us to consider both these scenarios. Because of the marked density contrast between the dense Santa Monica Mountains and the low-density sediments in the Los Angeles Basin, the gravity method is particularly useful in mapping the maximum displacement along the Santa Monica-Hollywood-Raymond fault zone. The gravity-defined Santa Monica–Hollywood fault zone deviates, in places, from the mapped active fault and fold scarps located with boreholes and trenching and by geomorphological mapping by Dolan and others (1997). Our models suggest that the Santa Monica–Hollywood fault zone dips northward approximately 63°. Three structural models are considered for the origin of the Hollywood basin: pull-apart basin, flexural basin, and a basin related to a back limb of a major fold. Although our preferred structural model involves flexure, the available geologic and geophysical data do not preclude contributions to the deepening of the basin from one or both of the other two models. Of particular interest is that the distribution of red-tagged buildings and structures damaged by the Northridge earthquake has a strong spatial correlation with the axis of the Hollywood basin defined by the gravity data. Several explanations for this correlation are explored, but two preferred geologic factors for the amplification of ground motion besides local site effects are (1) focussing of energy by a fault along the axis of the Hollywood basin and (2) focussing effects related to differential refraction of seismic rays across the basin.

California↗

2007 Rocky Mountain section Friends of the Pleistocene field trip - Quaternary geology of the San Luis basin of Colorado and New Mexico, September 7-9, 2007

Prologue Welcome to the 2007 Rocky Mountain Cell Friends of the Pleistocene Field Trip, which will concentrate on the Quaternary geology of the San Luis Basin of Colorado and New Mexico. To our best knowledge, Friends of the Pleistocene (FOP) has never run a trip through the San Luis Basin, although former trips in the region reviewed the 'Northern Rio Grande rift' in 1987 and the 'Landscape History and Processes on the Pajarito Plateau' in 1996. After nearly a decade, the FOP has returned to the Rio Grande rift, but to an area that has rarely hosted a trip with a Quaternary focus. The objective of FOP trips is to review - in the field - new and exciting research on Quaternary geoscience, typically research being conducted by graduate students. In our case, the research is more topically oriented around three areas of the San Luis Basin, and it is being conducted by a wide range of Federal, State, academic, and consulting geologists. This year's trip is ambitious?we will spend our first day mainly on the Holocene record around Great Sand Dunes National Park and Preserve, the second day on the Quaternary stratigraphy around the San Luis Hills, including evidence for Lake Alamosa and the 1.0 Ma Mesita volcano, and wrap up the trip's third day in the Costilla Plain and Sunshine Valley reviewing alluvial stratigraphy, the history of the Rio Grande, and evidence for young movement on the Sangre de Cristo fault zone. In the tradition of FOP trips, we will be camping along the field trip route for this meeting. On the night before our trip, we will be at the Great Sand Dunes National Park and Preserve's Pinyon Flats Campground, a group facility located about 2 miles north of the Visitors Center. After the first day's trip, we will dine and camp in the Bachus pit, about 3 miles southwest of Alamosa. For the final night (after day 2), we will bed down at La Junta Campground at the Bureau of Land Management (BLM) Wild and Scenic Rivers State Recreation Area, west of Questa, New Mexico, overlooking a majestic canyons of the Rio Grande and Red River. This is the 48th meeting of the Rocky Mountain Section of FOP, which was initiated by Gerry Richmond (USGS-Denver, deceased) in 1952 (see the following table, which lists all the Rocky Mountain Section field trips). The Rocky Mountain Section has been inactive for three years owing to a series of problems, including an unfortunate cancellation of Dennis Dahms' trip to the southern Wind River Range in 2005. Hopefully, this year's trip will provide the logistical initiative and scientific momentum for future Friends of the Pleistocene trips in the Rocky Mountain region.

Colorado, New Mexico↗

Seismic hazard study of the western portion of the Garlock fault [California]

Investigations of the western segment of the Garlock fault were conducted at Castac Lake, Twin Lakes and Oak Creek Canyon. Studies were concentrated on the youngest fault trace as delineated by Clark (1973). Seismic refraction surveys, topographic surveys and geologic mapping provided positive evidence for fault offsets in Quaternary deposits at Twin Lakes and Oak Creek Canyon. Investigations at Castac Lake were concentrated on the fault segment north of the lake. Previous investigations south of the lake and across the dry lake bottom exposed unbroken strata dating back 8050 +300 years B.P. No evidence of offset of young deposits was found north of the lake from surface investigations or seismic refraction data. Trenching of sag pond deposits at Twin Lakes revealed fault traces representing 2 events confined to a zone 3 meters wide. The stratigraphy at Twin Lakes consists of alternating units of clay and sand allowing measurements of vertical offsets. Based on radiocarbon dates of detrital charcoal, the most recent movement occurred less than 890 +195 years B.P. and the proceeding event occurred greater than 2,800 +165 years B.P. Total vertical offset was 80 to 100 cm for the most recent movement and 55-60 cm for the proceeding event. Geomorphic analysis of offset alluvial stream channels at Oak Creek Canyon provided an estimate of 1.6 to 3.3 mm per year of left lateral movement during Holocene and late Pleistocene times. This estimate is based on correlation of soil profile development with dated soil stratigraphy in the San Joaquin Valley. Scarp heights and lack of definitive evidence for recent left-lateral offset in Oak Creek Canyon indicates a significant and perhaps predominant vertical component of movement with: 1) a comparatively long recurrence interval and/or 2) a small component of left-lateral movement. Arching of late Pleistocene deposits in Oak Creek Canyon is consistent with right-lateral rather than left-lateral wrench faulting, suggesting a fluctuation in stresses along this part of the fault since late Pleistocene time.

Open-File Report↗

Occurrences of alunite, pyrophyllite, and clays in the Cerro La Tiza area, Puerto Rico

A deposit of hydrothermally altered rocks in the Cerro La Tiza area located between the towns of Comerio and Aguas Buenas, approximately 25 kilometers southwest of San Juan, Puerto Rico, was mapped and studied to determine the principal minerals, their extent distribution and origin, and the possibility of their economic utilization, especially in Puerto Rico. The Cerro la Tiza area is about 7 1 / 2 kilometers long, has an average width of about 1 1 / 2 kilometers and embraces a total area of approximately 15 square kilometers. The principal mineralized zone, a dike-like mass of light-colored rocks surrounded by dark-colored volcanic country rocks, occupies the crest and upper slopes of east-trending Cerro La Tiza ridge and is believed to be of Late Cretaceous or Eocene age. This zone is approximately 5,300 meters long, 430 meters wide and has an area of approximately 225 hectares (556 acres). The rocks of the mineralized zone are of mixed character and consist mainly of massive quartzose rocks and banded quartz-alunite rocks closely associated with foliated pyrophyllitic, sericitic and clayey rocks. The principal minerals in probably order of abundance are quartz, alunite, pyrophyllite, kaolin group clays (kaolinite and halloysite) and sericite. Minerals of minor abundance are native sulfure, diaspore, svanbergite (?), sunyite (?), hematite, goethite, pyrite, rutile (?) and very small quantities of unidentified minerals. The mineralized zone has broken down to deposits of earth-rock debris of Quaternary age that cover much of the slopes and flanks of Cerro La Tiza. This debris consists generally of fragments and boulders with a very large size range embedded in a clayey matrix. The distribution of the earth-rock debris with respect to the present topography and drainage suggests that it may have undergone at least two cycles of erosion. Underlying the earth-rock debris and completely enclosing the mineralized zone are country rocks of probably Late Cretaceous age. These consist principally of low flows and volcanic and flow breccias but contain thin interbedded siltstones and sandstones. The lavas are generally predominant at the western end of the area and the breccias at the eastern end. The mineralized zone and the country rocks are sheared along two predominant directions that are approximately N 70 degrees E and N 70 degrees W. The ridge of Cerro La Tiza appears to be a broad shear zone through which hydrothermal emanations gained access to the country rocks. The emanations are believed to have originated from intrusive rocks that probably underlie the area. The surrounding area contains both large and small exposed intrusive bodies. The largest one is the San Lorenzo batholith of Late Cretaceous or Eocene age whose exposed northwest edge is approximately 19 kilometers southeast of the eastern end of the Cerro La Tiza area. Other zones of hydrothermally altered rocks were discovered along a mineralized belt extending eastward from Cerro La Tiza through the Rio Gurabo Valley nearly to the Vieques Passage bordering the east coast of Puerto Rico. Other zones were discovered north and south of this belt and still others were found circumventing the San Lorenzo batholith. The most abundant minerals of the mineralized zone can be exploited for economic utilization in Puerto Rico. Alunite can be utilized in the manufacture of aluminum sulfate for water purification. It can also be used in the manufacture of alumina refractory materials. Pyrophyllite can be used as a carrier for insecticides and fungicides. It can also be utilized for the manufacture of ceramic products, as a filler in the soap industry and as a carrier for paint pigments. Kaolinite can be used in the ceramic industry and in the manufacture of glass as a substitute for feldspar. Halloysite might be utilized as a catalyst support in the cracking of petroleum. Tonnages of reserve ore on Cerro La Tiza are calculated to be 1,590,000 inferred short tons (1,440,000,000 inferred metric tons) of mixed minerals. These tonnages are based on the assumption that the depth of the mineralized zone is one-half of the exposed width. The deposit is well situated for open pit mining, but because of the existing cover of earth-rock debris, soil foliage, exploration should proceed exploitation for better determination of the most promising areas containing the best concentrations of the minerals sought.

Cerro La Tiza↗

Hydrostratigraphic interpretation of test-hole and borehole geophysical data, Kimball, Cheyenne, and Deuel Counties, Nebraska, 2011-12

Recently (2004) adopted legislation in Nebraska requires a sustainable balance between long-term supplies and uses of surface-water and groundwater and requires Natural Resources Districts to understand the effect of groundwater use on surface-water systems when developing a groundwater-management plan. The South Platte Natural Resources District (SPNRD) is located in the southern Nebraska Panhandle and overlies the nationally important High Plains aquifer. Declines in water levels have been documented, and more stringent regulations have been enacted to ensure the supply of ground-water will be sufficient to meet the needs of future generations. Because an improved understanding of the hydrogeologic characteristics of this aquifer system is needed to ensure sustainability of groundwater withdrawals, the U.S. Geological Survey, in cooperation with the SPNRD, Conservation and Survey Division of the University of Nebraska-Lincoln, and the Nebraska Environmental Trust, began a hydrogeologic study of the SPNRD to describe the lithology and thickness of the High Plains aquifer. This report documents these characteristics at 29 new test holes, 28 of which were drilled to the base of the High Plains aquifer. Herein the High Plains aquifer is considered to include all hydrologically connected units of Tertiary and Quaternary age. The depth to the base of aquifer was interpreted to range from 37 to 610 feet in 28 of the 29 test holes. At some locations, particularly northern Kimball County, the base-of-aquifer surface was difficult to interpret from drill cutting samples and borehole geophysical logs. The depth to the base of aquifer determined for test holes drilled for this report was compared with the base-of-aquifer surface interpreted by previous researchers. In general, there were greater differences between the base-of-aquifer elevation reported herein and those in previous studies for areas north of Lodgepole Creek compared to areas south of Lodgepole Creek. The largest difference was at test hole 5-SP-11, where an Ogallala-filled paleovalley prevously had been interpreted based on relatively sparse test-hole data west of 5-SP-11. The base of aquifer near test hole 5-SP-11 reported herein is approximately 230 ft higher in elevation than previously interpreted. Among other test holes that are likely to have been drilled in Ogallala-filled paleovalleys, the greatest difference in the interpreted base of aquifer was for test hole 7-CC-11, northeast of Potter, Nebraska, where the base of aquifer is 180 feet deeper than previously interpreted. Interpretation of test-hole and borehole geophysical data for 29 additional test holes will improve resource managers’ understanding of the hydrogeologic characteristics, including aquifer thickness. Aquifer thickness, which is related to total water in storage, is not well quantified in the north and south tablelands. The additional hydrostratigraphic interpretations provided in this report will improve the hydrogeologic framework used in current (2014) and future groundwater models, which are the basis for many water-management decisions.

Nebraska↗

Reconnaissance engineering geology of the Haines area, Alaska, with emphasis on evaluation of earthquake and other geologic hazards

The Alaska earthquake of March 27, 1964, brought into sharp focus the need for engineering geologic studies in urban areas. Study of the Haines area constitutes an integral part of an overall program to evaluate earthquake and other geologic hazards in most of the larger Alaska coastal communities. The evaluations of geologic hazards that follow, although based only upon reconnaissance studies and, therefore, subject to revision, will provide broad guidelines useful in city and land-use planning. It is hoped that the knowledge gained will result in new facilities being built in the best possible geologic environments and being designed so as to minimize future loss of life and property damage. Haines, which is in the northern part of southeastern Alaska approximately 75 miles northwest of Juneau, had a population, of about 700 people in 1970. It is built at the northern end of the Chilkat Peninsula and lies within the Coast Mountains of the Pacific Mountain system. The climate is predominantly marine and is characterized by mild winters and cool summers. The mapped area described in this report comprises about 17 square miles of land; deep fiords constitute most of the remaining mapped area that is evaluated in this study. The Haines area was covered by glacier ice at least once and probably several times during the Pleistocene Epoch. The presence of emergent marine deposits, several hundred feet above sea level, demonstrates that the land has been uplifted relative to sea level since the last major deglaciation of the region about 10,000 years ago. The rate of relative uplift of the land at Haines during the past 39 years is 2.26 cm per year. Most or all of this uplift appears to be due to rebound as a result of deglaciation. Both bedrock and surficial deposits are present in the area. Metamorphic and igneous rocks constitute the exposed bedrock. The metamorphic rocks consist of metabasalt of Mesozoic age and pyroxenite of probable early middle Cretaceous age. The igneous rocks consist of diorite and quartz diorite (tonalite) of Cretaceous age. Sedimentary rocks of Tertiary age may be present in the mapped area but are not exposed. The surficial deposits of Quaternary age,-have been divided into the following map units on the basis of time Of deposition, mode of origin, and grain size: (1) undifferentiated drift deposits, (2) outwash and Ice-contact deposits; (3) elevated fine-grained marine deposits, (4) elevated shore and delta deposits, (5) alluvial fan deposits, (6) colluvial deposits, (7) modern beach deposits, (8) Chilkat River flood-plain and delta deposits, and (9) manmade fill. Offshore deposits are described but are not mapped. Southeastern Alaska lies within the tectonically active belt that rims the northern Pacific Basin and has been active since at least early Paleozoic time. The outcrop pattern is the result of late Mesozoic and Tertiary deformational, metamorphic, and intrusive events. Large-scale faulting has been common. The two most prominent inferred fault systems in southeastern Alaska and surrounding regions are: (1) The Denali fault system and (2) the Fairweather-Queen Charlotte Islands fault system. In the general area of Haines, rocks of Mesozoic age northeast of Chilkat River have a simple monoclinal structure. Paleozoic-Mesozoic rocks southwest of Chilkat River are gently to rather complexly folded. Several major and numerous minor faults probably transect the general area of Haines but their exact location and character can only be inferred because their traces are coincident to the long axes of fiords and river valleys, where they are concealed by water or by valley-floor deposits. Inferred faults in or near the Haines mapped area are: (1) Chilkat River fault, (2) Chilkoot fault, (3) Takhin fault, and (4) faults in the saddle area at Haines. Southeastern Alaska lies in one of the two most seismically active zones in Alaska, a State where 6 percent of the world's shallow earthqua

Open-File Report↗

Ground-water investigations of the Project Gnome area, Eddy and Lea Counties, New Mexico

The U.S. Atomic Energy Commission, through the Office of Test Operations, Albuquerque Operations Office, plans to detonate a nuclear device in a massive salt bed 1,200 feet beneath the land surface. The project, known as Project Gnome, is an element of the Plowshare program--a study of peacetime applications of nuclear fission. The location of the proposed underground shot is in a sparsely-populated area in southeastern Eddy County, N. Mex., east of the Pecos River and about 25 miles southeast of the city of Carlsbad. The area is arid to Semiarid and ground water is a vital factor in the economic utilization of the land, which is primarily used for stock raising. An investigation of the Project Gnome site and surrounding area for the purposes of evaluating the ground-water resources and the possible effect upon them from the detonation of the nuclear shot was desired by the Commission. This report describes work done by the U.S. Geological Survey on behalf of the Commission and presents results of the investigation of the ground-water resources and geology of the area. The most intensive investigations were made within a 15-mile radius of the site of Project Gnome and mainly on the east side of the Pecos River. The total area of study of over 1,200 square miles includes parts of Eddy and Lea Counties, N. Mex. The Project Gnome site is in the sedimentary Delaware Basin. It is underlain by about 18,000 feet of sedimentary rocks ranging in age from Ordovician to Recent. Upper Permian evaporitic rocks, which contain the principal source of potash available in the United States, are worked in nearby mines. The potash minerals are found in a massive salt bed about 1,400 feet thick in the Salado Formation of Permian age. The land surface of the area is covered mostly by a wind-blown sand and caliche; however, rocks of the Rustler Formation of Permian age and younger rocks of Permian, Triassic, Pleistocene(?) and Recent age crop out at several localities. Solution by ground water of salt at the top of the Salado Formation and of anhydrite within the Rustler Formation has removed thick sections of these rocks. A subsequent lowering of the land surface and differential collapse of the Rustler has formed many sinkholes and has created a karst topography over much of the western part of the area. Ground water is obtained from rocks of Permian, Triassic, Tertiary, and Quaternary age in the general region. However, the only aquifer at the Gnome site is the Culebra Dolomite Member of the Rustler Formation of Permian age. The aquifer is about 500 feet beneath the surface at the site and is about 30 feet thick. An aquifer, immediately above the top of the salt, contains a brine solution in Nash Draw, a few miles west of the Gnome site. This aquifer discharges into the Pecos River and is a major source of contamination of the river water. No potable water is known to be present in the area below the top of the salt of the Salado Formation. The ground water in the area is generally under artesian pressure. The general direction of ground-water movement is toward the Pecos River both east and west of the river. At the Gnome site the artesian head of the water in the Culebra Dolomite Member is about 7.5 feet. The water moves westward through the aquifer at a rate of about ? foot per day. The most widespread utilization of ground water east of the river is for stock use. Irrigation usage west of the Pecos River accounts for the largest withdrawal of water. Wells range in depth from a few tens of feet to nearly 800 feet. Water levels range from a few feet to about 500 feet below the surface. A test well at the Gnome site drawing water from the Culebra Dolomite Member was pumped at a rate of 100 gpm (gallons per minute); however, most wells east of the river yield only a few gpm. Irrigation wells west of the river yield as much as 3,500 gpm. Most of the water in the area is highly mineralized and is suitable only for use by livest

Open-File Report↗

Reconnaissance geology of the Ghazzalah Quadrangle, sheet 26/41 A, Kingdom of Saudi Arabia

The Ghazzalah quadrangle is located in the northern Precambrian shield of Saudi Arabia between lat 26?30' and 27?00' N. and long 41?00' and 41?30' E. The area is underlain by two lithologically distinct, Precambrian volcanosedimentary units and a wide range of dioritoid and granitoid plutonic intrusive rocks. The only Phanerozoic rocks consist of one outcrop of Tertiary(?) basalt and widespread but thin deposits of Quaternary detritus. The Banana greenstone, the oldest rock in the quadrangle, consists of intermediate volcanic and subvolcanic rocks and minor interbedded marble, which have been metamorphosed to greenschist-facies assemblages. Volcanic rocks mainly range in composition from basalt to andesite, and subvolcanic rocks consist of diorite and diabase. The Banana greenstone is unconformably overlain by silicic volcanic rocks and minor arkosic sandstone and breccia of the Hadn formation. Preservation of delicate volcanic textures suggests that the rocks have been only incipiently metamorphosed. Unpublished rubidium/strontium isotopic data for the Hadn formation suggest an age of 620 to 610 Ma. Intrusive rocks are separable according to their ages relative to the Hadn formation. Those that are unconformably overlain by the Hadn formation consist of hornblende quartz diorite and gabbro, which may be consanguineous with the Banana greenstone, and younger tonalite, biotite-hornblende granodiorite, syenogranite, and monzogranite. Plutons of monzogranite, alkali-feldspar g,ranite, syenbgranite, peralkaline granite, and hypabyssal intrusions of granophyre were probably emplaced during a period coincident with and (or) following Hadn volcanism. Uranium-lead and rubidium/strontium isotopic data for two plutons in the adjacent Al Qasr quadrangle suggest that plutonic activity persisted in the region until about 580 to 570 Ma. Faulting appears to postdate all of the plutonic rocks. The dominant faults belong to a northeast-trending system of right-lateral shears; a subordinant system consists of mainly north- to northwest-trending faults. The peralkaline-granite plutons underlying Jibal Ba'gham and Jibal ar Rumman have the most economic potential. Wadi samples from these areas show an anomalous concentrations of tin, lead, niobium, and yttrium. Localized, intense radiometric anomalies in the Ba'gham intrusive complex are associated with high concentrations )f thorium, uranium, andrare-earth elements.

Open-File Report↗

Preliminary geologic map of the White Sulphur Springs 30' x 60' Quadrangle, Montana

The geologic map of the White Sulphur Springs quadrangle, scale 1:100,000, was made as part of the Montana Investigations Project to provide new information on the stratigraphy, structure, and geologic history of the geologically complex area in west-central Montana. The quadrangle encompasses about 4,235 km2 (1,635 mi2), across part of the Smith River basin, the west end of the Little Belt Mountains, the Castle Mountains, and the upper parts of the basins of the North Forks of the Smith and Musselshell Rivers and the Judith River. Geologically the quadrangle extends across the eastern part of the Helena structural salient in the Rocky Mountain thrust belt, a segment of the Lewis and Clark tectonic zone, west end of the ancestral central Montana uplift, and the southwest edge of the Judith basin. Rocks and sediments in the White Sulphur Springs quadrangle are assigned to 88 map units on the basis of rock or sediment type and age. The oldest rock exposed is Neoarchean diorite that is infolded with Paleoproterozoic metamorphic rocks including gneiss, diorite, granite, amphibolite, schist, and mixed metamorphic rock types. A thick succession of the Mesoproterozoic Belt Supergroup unconformably overlies the metamorphic rocks and, in turn, is overlain unconformably by Phanerozoic sedimentary and volcanic rocks. Across most of the quadrangle, the pre-Tertiary stratigraphic succession is intruded by Eocene dikes, sills, and plutons. The central part of the Little Belt Mountains is generally underlain by laccoliths and sheet-like bodies of quartz monzonite or dacite. Oligocene andesitic basalt flows in the western and southern part of the quadrangle document both the configuration of the late Eocene erosional surfaces and the extent of extensional faulting younger than early Oligocene in the area. Pliocene, Miocene, and Oligocene strata, mapped as 11 units, consist generally of interbedded sand, gravel, and tuffaceous sedimentary rock. Quaternary and Quaternary-Tertiary sediments rest across the older Cenozoic deposits and across all older rocks. The Quaternary and Quaternary-Tertiary deposits generally are gravels that mantle broad erosional surfaces on the flanks of the mountains, gravels in stream channels, and colluvium and landslide deposits on hill sides. Glacial deposits, representing at least two stages of glaciation, are present in the northern part of the Little Belt Mountains. The geologic structure of much of the northwest part of the quadrangle is a broad uplift, in the core of which the Paleoproterozoic and Neoarchean metamorphic rocks are exposed. Down plunge to the east, the succession of Phanerozoic sedimentary rocks define an east-trending arch, cored locally by Mesoproterozoic strata of the Belt Supergroup. The north flank of the arch dips steeply north as a monocline. Stratigraphic relations among Mississippian, Pennsylvanian, and Jurassic strata document the recurrent uplift and erosion on that north flank. The broader arch of the Little Belt Mountains reflects the west plunge of the ancestral Central Montana uplift. The eastern extension of the Lewis and Clark tectonic zone is exposed in the southern half of the quadrangle where the Volcano Valley fault zone curves from west to southeast as a reverse fault along which the latest movement is up on the south side. The fault zone ends in an anticline in the south-central margin of the quadrangle. Stratigraphic overlap of Phanerozoic strata over the truncated edges of Mesoproterozoic units documents that the area of the eastern terminus of the fault zone was tectonically recurrently active. Northeast trending strike-slip faults displace Mesoproterozoic rocks in the northwest and south-central parts of the quadrangle. Several of those faults are overlain unconformably by the Middle Cambrian Flathead Sandstone. Other north-east and west-trending faults across the central part of the quadrangle are intruded by middle Eocene plutons. You

Montana↗