USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Geophysical Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,661 records · Page 28Linked to original sources
USGS2024

Field evidence and indicators of rockfall fragmentation and implications for mobility

Rockfall fragmentation can play an important role in hazard studies and the design of protective measures. However, the current lack of modeling tools that incorporate rock fragmentation mechanics is a limitation to enhancing studies and design. This research investigates the fragmentation patterns of rockfalls and analyzes the resulting distribution of fragment sizes within corresponding rockfall deposits. We focus on small rock fragments, which provide insights into the dynamics of the rockfall event and can be used as input for numerical modeling. We analyzed multiple rockfall events from locations worldwide, each exhibiting different degrees of fragmentation. Using image analysis techniques, we mapped all visible blocks, determined their volumes, and measured the distances they travelled from the initial point of impact. A key finding is the identification of three indicators of fragmentation. First, in cases where fragmentation was largely absent, we observed a trend of increasing block size with distance from the impact point or source area, which aligns with previously published findings. However, for energetic rockfall events characterized by intense fragmentation, we observed that small fragments exhibited longer travel distances compared to larger fragments. This distinction allowed us to differentiate blocks primarily resulting from the disaggregation process from those primarily resulting from dynamic fragmentation, with implications for rockfall mobility. Second, although the size distribution of rockfall deposits exhibits a power-law scaling for volumes larger than a minimum size threshold corresponding to a rollover of the distribution, in some case studies a deviation from power-law scaling is observed, indicating a process of larger block comminution due to fragmentation. Third, we found that rockfalls with fragmentation experience reduced mobility, indicated by higher reach angles, and higher lateral dispersion showing a wider distribution of trajectories. We interpret these findings as being directly related to the energy-consuming nature of fragmentation, which prevents farther deposition of fragmented rock blocks.

Albacete province, Lombardy and Aosta Valley, Yose↗
USGS2025

Earthquake magnitude and source parameter estimation with a distributed acoustic sensing dataset in the Gorda subduction zone

Distributed acoustic sensing (DAS) systems offer a cost‐effective way to create large‐scale strainmeter arrays for seismological applications using fiber‐optic cables. DAS‐based strain measurements are known to be influenced by various factors, bringing into question their general reliability for accurate earthquake characterization. A 15‐km‐long DAS deployment in northern California was operational within 3 days of the 2022 M w 6.4 Ferndale earthquake and ran continuously throughout the aftershock sequence. We utilize these aftershock data to validate DAS‐based strain measurements in two ways. We first test the accuracy of DAS‐based magnitude estimates from peak dynamic strains by comparing them with magnitude and attenuation scaling relations derived independently from traditional borehole strainmeter (BSM) data. We demonstrate that DAS‐based magnitudes are comparable to BSM‐based magnitudes when corrections for variations in site response along the fiber‐optic cable are properly made. Magnitude errors are spatially correlated, potentially because of factors such as finite‐fault effects (e.g., stress drop) or more complex, unmodeled path attenuation or because of wave propagation effects in heterogeneous media. We then apply more advanced source characterization methodology to the DAS data using a time‐domain empirical Green’s function (EGF) deconvolution approach to measure details of the moment rate history. The EGF approach using DAS data depends on careful treatment of distorting factors such as anthropogenic sources of noise and optical phase wrapping but successfully isolates source spectra for moderate‐magnitude earthquakes: source spectral ratios obtained from DAS data, broadband seismometer data, and BSM data in the same region show consistent results, revealing differences in directivity and spectral shape among earthquakes. Although further research is needed to refine source‐time‐function estimation techniques for DAS data, particularly for larger magnitude events, these case studies demonstrate the clear potential of DAS for earthquake source characterization.

California↗
USGS2025

Favorability mapping for hydrothermal power resource assessments of the Great Basin, USA

The U.S. Geological Survey (USGS) is updating the 2008 assessment of conventional hydrothermal resources for the Great Basin in the western United States. As part of this work, the workflow for hydrothermal resource favorability maps is being modified to integrate modern data-driven machine learning (ML) methods. Improvements include: [1] using new and refined evidence layers (features); [2] using an order of magnitude more training sites (labeled examples); [3] utilizing simple but non-linear supervised ML algorithms; [4] representing positive training sites (wells with measured heat flow) with their ordinal value proportional to the magnitude of convective upflow (i.e., low, high, or very high convective signals instead of past strategies using positive-negative labels); [5] supplementing training sites with additional sites with low convective signals to represent diverse under-sampled areas where hydrothermal systems are unlikely to exist; [6] comparing with competing approaches; and [7] utilizing Monte Carlo cross-validation to estimate and evaluate prediction uncertainty. For the new favorability map, over half of the power-producing systems (i.e., 15 of 28) are predicted in the 99th percentile of most favorable locations (i.e., the highest 1 % of favorability, corresponding to 1 % of the map area), exceeding the performance of past models that have explicitly used power plants as training sites. Previous favorability maps predicted approximately half of the power-producing hydrothermal systems above the 80th percentile (i.e., 20 % of the map area). For the new favorability map, 93 % of power-producing systems (i.e., 26 of 28) are above the 80th percentile. The power-producing systems for which the new model does not perform well are either comparatively small, low-temperature systems or systems also not predicted well by prior modeling approaches, suggesting that these few systems are unusual when compared with most power-producing systems. Focusing research on these known, seemingly different systems may yield new insights and subsequent discovery of new prospects.

California, Idaho, Nevada, Oregon, Utah↗
USGS2024

Coastal Science Navigator companion guide—Discover the U.S. Geological Survey coastal science products you need

The Coastal Science Navigator is an online gateway to a wide variety of U.S. Geological Survey (USGS) coastal change hazards-related information, data, and tools relevant to stakeholders’ scientific and decision-making needs. The products within the Coastal Science Navigator provide data related to past, present, and future threats to our coastlines. The filter search allows users to see all available products and identify relevant options by time scale, geographic scope, coastal hazard theme, and other filters. The guided search suggests products based on users’ answers to a short series of questions. A comprehensive summary is available for each product. The idea for the Coastal Science Navigator arose in 2020 in response to stakeholder feedback identifying the need for a central source for USGS coastal science information. It was published in July 2023 and initially included 55 products. Regular updates are planned to integrate other existing and new products. This guide introduces some of the many coastal change hazards-related products available through the USGS. In it, we showcase the products included in the Coastal Science Navigator’s initial publication in July 2023. While it is not representative of all the information, tools, and data available, we hope it serves as a compelling snapshot of what the USGS has to offer and encourages you to explore the Coastal Science Navigator to discover more of the products you need. To navigate this guide, the products have been organized by the time scale they are best suited for—past, present, or future—although many products cover multiple time scales. An additional section features software, one of the many product types available as filters within the Coastal Science Navigator. Other products include downloadable data, websites, and geonarratives (web pages that combine text, images, and interactive maps into narratives you can scroll through). Featured geographic scopes are also highlighted within this guide, detailing some of the many regions in which the USGS conducts research and illustrating another way to filter products within the Coastal Science Navigator.

Circular↗
USGS2023

Don’t Let Negatives Hold You Back: Accounting for Underlying Physics and Natural Distributions of Hydrothermal Systems When Selecting Negative Training Sites Leads to Better Machine Learning Predictions

Selecting negative training sites is an important challenge to resolve when utilizing machine learning (ML) for predicting hydrothermal resource favorability because ideal models would discriminate between hydrothermal systems (positives) and all types of locations without hydrothermal systems (negatives). The Nevada Machine Learning project (NVML) fit an artificial neural network to identify areas favorable for hydrothermal systems by selecting 62 negative sites where the research team had confidence that no hydrothermal resource exists. Herein, we compare the implications of the expert selection of negatives (i.e., the NVML strategy) with a random sample strategy, where it is assumed that areas outside the favorable structural ellipses defined by NVML are negative. Because hydrothermal systems are sparse, it is highly probable that, in the absence of a favorable geological structure, hydrothermal favorability is low. We compare three training strategies: 1) the positive and negative labeled examples from NVML; 2) the positive examples from NVML with randomly selected negatives in equal frequency as NVML; and 3) the positive examples from NVML with randomly selected negatives reflecting the expected natural distribution of hydrothermal systems relative to the total area. We apply these training strategies to the NVML feature data (input data) using two ML algorithms (XGBoost and logistic regression) to create six favorability maps for hydrothermal resources. When accounting for the expected natural distribution of hydrothermal systems, we find that XGBoost performs better than the NVML neural network and its negatives. Model validation was less reliable using F1 scores, a common performance metric, than comparing probability estimates at known positives, likely because of the extreme natural class imbalance and the lack of negatively labeled sites. This work demonstrates that expert selection of negatives for training in NVML likely imparted modeling bias. Accounting for the sparsity of hydrothermal systems and all the types of locations without hydrothermal systems allows us to create better models for predicting hydrothermal resource favorability.

Geothermal Resources Council Transactions↗
USGS2026

Vegetation cover and composition in environments surrounding uranium mines in the Grand Canyon ecosystem, Northern Arizona

Mining uranium from breccia-pipe deposits in the greater Grand Canyon region has occurred since the mid-1900s. However, possible ecosystem contamination with harmful levels of radionuclides may have occurred due to mining activities in the 21st century. In response, a 20-year Federal moratorium on new mining claims in the Grand Canyon watershed was initiated in 2012, to allow time to evaluate the potential effects of uranium exploration and mining on human health, wildlife, and water resources. This moratorium, nor the 2023 designation of the “Baaj Nwaavjo I’tah Kukveni–Ancestral Footprints of the Grand Canyon National Monument,” precludes operation or development of mining claims predating 2012. Vegetation is a core ecosystem component that may be affected by uranium mining (for instance, through uptake and storage of radionuclides from the air or soil) or may act as a vector of exposure to wildlife, livestock, and humans (for instance, via their consumption of contaminated plant tissues). To provide baseline information about the plant communities associated with uranium mines in the Grand Canyon region, the U.S. Geological Survey surveyed an approximately 200-meter-wide buffer surrounding four breccia-pipe deposits, each in a unique stage of mine development, and at one reference area (a livestock water tank) that underwent ground disturbance but contains no mineral deposits. We sectioned the buffer zones into 0.65–4.52 hectare plots, within which we (1) inventoried all plant species, (2) measured percent cover of plant species, plant functional groups, and ground surface types (dark cyanobacteria, lichen, moss, bedrock, rock, embedded litter, duff, plant bases, and bare soil) using line-point intercept, and (3) measured length and frequency of gaps between perennial plant canopies using canopy gap intercept. We found that plant composition at the mines and the reference area differed from one another but were all characteristic of expected regional vegetation patterns. We provide this data summary as potential baseline information for future research and management efforts.

Arizona↗
USGS2024

A comparative analysis of OpenET for evaluating evapotranspiration in California almond orchards

The almond industry in California faces water management challenges that are being exacerbated by droughts, climate change, and groundwater sustainability legislation. The Tree-crop Remote sensing of Evapotranspiration eXperiment (T-REX) aims to explore opportunities to improve precision irrigation management for woody perennial cropping systems. Almond orchards in the California Central Valley were equipped with eddy covariance flux measurements to evaluate satellite remote sensing-based evapotranspiration (RSET) models. OpenET provides high-resolution (30-m spatial and daily temporal) RSET data, synthesizing decades of research for practical water management. This study provides an evaluation of OpenET performance at six almond sites covering a large range in soils, age, and variety. It also compares OpenET ensemble evapotranspiration (ET) data with applied irrigation and precipitation records over an additional 148 almond orchards located in the Central Valley of California. Results show OpenET models, including the ensemble ET value, produced reasonable and actionable ET values, with overall coefficient of determination (R 2 ) and mean absolute error values of 0.73- and 0.95-mm d −1 at the daily time step, respectively. However, given the temporal sampling of Landsat (8-day revisit) and the interpolation methods used, the assessed ET models had difficulty in capturing short-term variability in almond ET; for example, the rapid decline in measured ET observed as a response to lack of irrigation preceding and during almond harvest. The study also drew attention to the spatial complexity in scenarios where irrigated orchards are surrounded by hot/dry areas, causing discrepancies between measured and modeled ET values. In comparison with irrigation records, OpenET ensemble ET was capable of quantifying water input (applied irrigation + precipitation) in almond orchards to within 13 % when evaluating monthly data. Initial results presented here reinforce the idea that RSET models, such as in OpenET, are powerful tools, yet their application requires nuanced understanding and careful consideration of local conditions.

California↗
USGS2024

Streams, springs, and volcanic lakes for volcano monitoring

Introduction Volcanic unrest can trigger appreciable change to surface waters such as streams, springs, and volcanic lakes. Magma degassing produces gases and soluble salts that are absorbed into groundwater that feeds streams and lakes. As magma ascends, the amount of heat and degassing will increase, and so will any related geochemical and thermal signal. Subsurface magma movement can cause pressurization that alters hydrostatic head and may induce groundwater discharge. Fluid-pressure changes have been linked to distal volcano-tectonic earthquakes (White and McCausland, 2016; Coulon and others, 2017) and phreatic eruptions (for example, Yamaoka and others, 2016). Clearly, changes in groundwater and surface waters are both indicators of unrest and clues to how and where magma is rising toward the surface. Where possible, it is prudent to incorporate real-time hydrologic data into multiparameter monitoring of restless volcanoes. Hydrologic dynamics can also be tracked by changes in groundwater levels that are commonly measured in shallow boreholes (see of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–K, 5 p., https://doi.org/10.3133/sir20245062k. ">chapter K , this volume, on boreholes; Hurwitz and Lowenstern, 2024). Although inferred to be common, relatively few volcano-hydrology anomalies are well documented, and many are essentially anecdotal (Newhall and others, 2001), reflecting the fact that high-resolution time series remain rare. Extreme examples include the 2008 eruption of Nevado del Huila, Colombia, where relatively minor phreatomagmatic eruptions were accompanied by expulsion of as much as 300 million cubic meters of groundwater from fissures high on the volcano (Worni and others, 2011), generating large lahars. Substantial decreases in flow rate from springs about 8 kilometers from the summit of Mayon Volcano, Philippines, have been noted before most eruptions in the 20th century (Newhall and others, 2001). Stream monitoring at Redoubt Volcano in 2009 allowed Werner and others (2012) to recognize that groundwater was unable to absorb (or scrub) the high flux of volcanic gas and that a high CO 2 /SO 2 precursor signal had been evident for 5 months prior to the eruption. A key to better interpreting hydrologic anomalies—or even identifying them—is therefore obtaining adequate baseline data. Most hydrologic monitoring at U.S. volcanoes has been accomplished by intermittent sampling surveys with annual or less frequent sampling (for example, https://hotspringchem.wr.usgs.gov/index.php ). More frequent sampling, however, generally is needed to establish reliable baselines. A recent hydrologic and hydrothermal monitoring experiment at 25 sites and 10 of the 12 level 4 (very high threat) volcanoes in the U.S. portion of the Cascade Range demonstrated that there is sufficient temporal variability in hydrothermal fluxes, even during quiescent periods, that one-time measurements will commonly have limited interpretive value (Crankshaw and others, 2018). Thus, surveys are best augmented with data from streamgages (for example, Evans and others, 2004; Bergfeld and others, 2008). Streamflow (water discharge) data allow measured temperature and specific conductance to be converted to heat and solute mass fluxes, which could be insightful parameters for detecting anomalous activity (McCleskey and others, 2012). At the Yellowstone Caldera, long-term monitoring of river solutes has allowed calculation of the chloride flux, a proxy for heat discharge (Hurwitz and others, 2007; McCleskey and others, 2016) from the subsurface magma. This is readily accomplished because data from streamgages are continuously recorded and archived by the U.S. Geological Survey (USGS) National Water Information System (NWIS) (USGS, 2024). Similar studies on stratovolcanoes or shield volcanoes would be scientifically useful, and yet are logistically challenging, requiring streamgages on numerous radial drainages complemented by either frequent manual sampling or numerous deployments of equipment to measure water temperature and specific conductance as a proxy for water chemistry. Another challenge is that some volcanic areas, especially shield volcanoes, are characterized by near-surface porous rocks and soils, such that surface streams are rare and replaced by distant, dilute large-volume springs with only a trace of any original volcanically sourced water (Manga, 2001; Hurwitz and others, 2021). Volcanic lakes are worthy of special attention for monitoring efforts, as their temperature and composition can provide evidence of increased flux of volatile-rich fluids from below. Quantifying changes in volatile and heat release from magma can be simpler in lakes than for volcanoes with radial drainages and no major lakes. Moreover, volcanic lakes pose a range of hazards themselves, including phreatomagmatic eruptions, debris flows, flank collapse, tsunamis, and toxic gas release (Mastin and Witter, 2000; Delmelle and others, 2015; Manville, 2015; Rouwet and others, 2015)—hazards that have historically been responsible for substantial loss of life at many volcanoes worldwide (Manville, 2015). Catastrophic CO 2 release at Lake Nyos, Cameroon, in 1986 suffocated about 1,750 people and about 3,500 livestock and was probably triggered by a large landslide into the gas-saturated lake (Kling and others, 1987; Evans and others, 1993). Gas-charged springs in Soda Bay within Clear Lake (California) have caused almost a dozen deaths to bathers in the past hundred years (ABC News, 2000). A 2005 example of lake overturn and abundant gas release was documented at Mount Chiginagak in Alaska (Schaefer and others, 2008) but did not result in any human casualties. Although thermally stratified lakes, which promote trapping of exsolved magmatic gas, tend to develop in tropical regions, the phenomenon can also arise where salinity creates meromixis (a condition in which a lake does not mix completely), as occurs in Mono Lake, California (Jellison and Melack, 1993; Jellison and others, 1998). If magma erupts or flows into a lake, the interaction between hot magma and cold water can be explosive (Mastin and others, 2004; Zimanowski and others, 2015) and substantially expand the area affected by the eruption. Another hazard is the breaching of crater rims by landslides triggered by volcanic and (or) seismic activity. Under some circumstances, substantial volumes of water can be displaced, leading to large floods and lahars. Late Holocene lake flooding from Aniakchak Crater in the Alaska Peninsula (Waythomas, 2022) and from Paulina Lake in Newberry Crater, Oregon (Chitwood and Jensen, 2000), caused by the failure of outlet sills, testify to the substantial hazards at lake-filled calderas. Several volcanic systems in the United States host lakes known to receive heat and gas from underlying magma. These lakes vary widely in area, depth, and chemical composition. Lakes are present at level 4 volcanoes, including Crater Lake and Newberry Volcano in Oregon; Yellowstone Caldera in Wyoming; Long Valley Caldera, Clear Lake volcanic field, Medicine Lake, and Salton Buttes in California; and Aniakchak Crater, Mount Katmai, Fisher Caldera, Mount Okmok, and Kaguyak Crater, among others, in Alaska. A water lake was present in Halemaʻumaʻu, the crater of Kīlauea, Hawai‘i (fig. F1), from October 2019 to December 2020. Level 3 volcanoes with lakes include Mono Lake volcanic field (Calif.), Mount Bachelor (Ore.), Ukinrek Maars and Mount Chiginagak (Alaska), and Soda Lake (Nevada). In addition, there are lakes at many levels 1 and 2 volcanoes. In the United States, there are no strongly acidic lakes that receive abundant input of magmatic gas, such as those found at Mount Ruapehu (New Zealand), Ijen and Kelud (Indonesia), and Poás (Costa Rica). Nevertheless, many contain fluids that provide clues to magmatic processes below. Since publication of a previous report on recommended instrumentation for volcano monitoring (Moran and others, 2008), continuous hydrologic monitoring has become increasingly feasible. However, changes in water pressure, temperature, and chemistry remain, in general, poorly studied phenomena at volcanoes (Sparks, 2003; National Academies of Sciences, Engineering, and Medicine, 2017). Recent efforts by the USGS have included the temporary study of Cascade Range volcanoes, which included frequent (15 minute to hourly) temporal sampling of temperature, depth, and conductivity (Crankshaw and others, 2018; Ingebritsen and Evans, 2019). At Yellowstone Caldera, many streamgages have now added thermistors and specific conductance sensors, allowing estimation of time-dependent chloride flux as a proxy for variations in subsurface heat flux (McCleskey and others, 2012, 2016). Efforts to better understand lakes have also accelerated, with bathymetric mapping and sampling carried out at several locations in the United States. Especially thorough work was done at Yellowstone Lake thanks to the Hydrothermal Dynamics of Yellowstone Lake (HD-YLAKE, https://hdylake.org ) project, funded primarily by the National Science Foundation. In addition to geophysical surveys and recovery of cores and other samples, HD-YLAKE investigations included remotely operated vehicle (ROV) investigations of hydrothermal vents on the lake floor (fig. F2). Data collected by the ROV provided a better understanding of the thermal and chemical influx from lake-bottom hydrothermal systems (Sohn and others, 2017). In this chapter, we focus on detecting changes in the chemistry, temperature, discharge, or water levels of streams, springs, and lakes that can be caused by seismicity, volumetric strains, or increases in gas flux associated with ascending magma. There is unavoidable overlap with other chapters of this report. Samples of water and gas can also be obtained in boreholes ( of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–K, 5 p., https://doi.org/10.3133/sir20245062k. ">chapter K , this volume; Hurwitz and Lowenstern, 2024), both shallow and deep. Gas monitoring ( of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–E, 11 p., https://doi.org/10.3133/sir20245062e.">chapter E , this volume; Lewicki and others, 2024) relies in part on samples from springs and wells, particularly where measurable gas plumes are absent. Water acts as a trigger and lubricant for landslides and sediment-rich floods, and so hydrology has obvious relevance for lahar monitoring, as discussed in of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–H, 6 p., https://doi.org/10.3133/sir20245062h. ">chapter H (this volume; Thelen and others, 2024). Shared situational awareness among scientists engaged in geophysical, gas, and hydrologic monitoring will improve overall understanding of the volcanic hazard.

Scientific Investigations Report↗
USGS2025

Ungulate migrations of the Western United States, volume 5

Many ungulates migrate between distinct summer and winter ranges to take advantage of spatially and temporally variable food sources and avoid threats such as predators and deep snow. In 2018, the U.S. Department of the Interior established Secretarial Order 3362, which provided Federal support to expand existing research efforts to study ungulate populations and conserve their migrations by enhancing habitat quality for ungulates across the Western United States. In response to the order, the U.S. Geological Survey (USGS) created the Corridor Mapping Team, which is a collaboration among 11 State agencies, regional and Federal partners, and an expanding number of Tribal wildlife agencies. Together, the Corridor Mapping Team maps ungulate migrations throughout the Western United States and publishes them in the USGS “Ungulate Migrations of the Western United States” report series. This report details migrations and seasonal ranges from 36 additional herds and includes 2 herd updates detailed in previous reports. The Corridor Mapping Team has mapped the migrations and seasonal ranges of 218 unique herds for the report series, including this report. The report series serves as a map-based inventory of the ungulate migrations across the Western United States for biologists, managers, policymakers, and conservation practitioners. Building on the previous report volumes in the series, volume 5 additionally describes some of the local and national initiatives that are incorporating the products, tools, and information from this growing USGS report series.

Navajo Nation↗
USGS2026

Mountain goat declines in a protected, interior, native population

A shifting climate poses threats to alpine-adapted species including mountain goats. We used long-term (12 years) citizen science monitoring data and Bayesian N-mixture modeling to estimate population trends and drivers of population metrics among mountain goats in Glacier National Park (GNP). Median goats per site ( n = 37 sites) declined by 45% (95% credible interval [CRI] = 32%, 57%) from 77.8 (95% CRI = 64.4, 95.1) in 2008 to 42.3 (95% CRI = 34.3, 52.2) in 2019, with consistent declines from 2008 until 2015, when the number of estimated goats stabilized. The decline exceeds IUCN criteria for classifying a population as vulnerable, >30% declines over only two generations. Across years, relatively few goats occupied northwestern GNP. Goat numbers declined the most at northeastern sites, trended toward decline in most southern sites, and increased at only two west-central sites. The proportion of permanent snow and glaciers, the presence of natural mineral licks, and habituation strongly increased the initial abundance of goats in the area. Weather variables had the greatest influence on population growth rates, particularly precipitation between May 15 and June 15 of the previous summer, the neonatal period. Lower growth occurred with less snow water equivalent and lower mean winter temperature, early summer temperature, and early summer precipitation. Projected reductions of permanent snow, increasing spring and summer temperatures, and insufficient and variable spring precipitation raise concerns for the future of native goats in this region. Our analyses reveal ways to improve detection rates of goats during surveys, which is important for optimizing the precision of estimates and the power to detect future trends. Detection increased with goat habituation, retention of observers with experience, use of binoculars, and conducting surveys at lower temperatures and earlier dates. Improving detection will be particularly important given the lower number of goats currently observed in the park. Research to estimate park-wide population size, evaluate genetic structure and diversity, assess changing habitat, human recreation levels and forage, and forward-project climate effects on persistence will be crucial to understanding the context of these results and conserving this iconic, metapopulation at the southern edge of the distribution of native mountain goats.

Montana↗
USGS2024

Simulation of groundwater flow and brine discharge to the Dolores River in the Paradox Valley, Montrose County, Colorado

Salinity, or total dissolved solids (TDS), of the Colorado River affects agricultural, municipal, and industrial water users and is an important concern in the Western United States. In the Paradox Valley of southwestern Colorado, natural discharge of sodium-chloride brine to the Dolores River from the underlying core of a salt-valley anticline accounts for about 6 percent of the salinity load to the Colorado River. Formation of the Paradox Valley began during the Miocene, and subsequent erosion exposed the Pennsylvania Paradox Formation in the core of the anticline where a cap rock, collapse features, breccia, and sodium-chloride saturated brine developed at the top of the exposed salt diapir. The discharge of brine to the Dolores River is affected by these dissolution features, along with seasonal hydrologic conditions and density-dependent flow between older dense brine and the younger fresh groundwater in the overlying alluvial aquifer. To reduce TDS concentrations in the Dolores River through the Paradox Valley, the Bureau of Reclamation has pumped brine from a series of shallow wells adjacent to the river since July 1996. The pumped brine is collected and piped to a deep disposal well where it is injected into the Mississippian Leadville Limestone at a depth of about 4,570-meters below land surface. The pumping and injection operation is collectively known as the Paradox Valley Unit (PVU), and by 2015, the PVU had substantially reduced TDS concentrations in the Dolores River by about 70 percent. Since 2019, injection-pressure limits and related seismic activity have constrained deep-well injection and thus brine pumping at the PVU. In cooperation with the Bureau of Reclamation, the U.S. Geological Survey developed a MODFLOW-6 three-dimensional, variable-density groundwater flow and TDS transport model of the Paradox Valley to evaluate the effects of PVU pumping operations on brine discharge to the Dolores River and to guide additional research. The finite-difference model grid consists of 76 rows and 48 columns oriented from northwest to southeast in alignment with valley topography and groundwater-flow directions in the near-surface freshwater alluvial aquifer. A 7-layer hydrogeologic framework was developed from existing datasets to represent the alluvial aquifer, cap rock, collapse breccia, and groundwater flow and TDS transport from the underlying Paradox Formation salt to the Dolores River. The model represents a 33-year transient calibration period from 1987 through 2020 that includes pre-PVU conditions from 1987 through June 1996 and post-PVU conditions from July 1996 through 2020. A 1,000-year simulation of groundwater flow and coupled TDS transport computed the initial conditions for the subsequent 33-year transient simulation. Observations of precipitation, streamflow, evaporation, agricultural land use, and PVU brine pumping rates were used to specify appropriate boundary conditions to the model representing time-varying recharge, tributary streamflow, groundwater underflow, evapotranspiration (ET), and PVU pumping. Values for average monthly streamflow and TDS concentration at the upstream streamgage, the Dolores River at Bedrock (USGS streamgage 09169500), were specified as model input where the Dolores River enters Paradox Valley. Observed pumping from the PVU, water levels and TDS concentrations in groundwater, and streamflow and estimated TDS concentrations at the downstream streamgage, the Dolores River near Bedrock (USGS streamgage 09171100), were calibration targets that constrained the manual calibration of model parameters representing aquifer hydraulic conductivity, storage, streambed conductance, recharge, and (ET). Two primary model-calibration targets were the match between observed and simulated TDS mass flux from PVU pumping wells and the match between estimated and simulated TDS mass flux to the Dolores River. The simulated TDS mass withdrawn by pumping wells is calculated by the model as the product of the assigned pumping rate and simulated groundwater TDS concentrations. Because actual pumping rates were assigned as simulated values, the total simulated PVU pumping for the 33-year calibration is within 0.5 percent of the observed values. However, simulated concentrations and thus mass flux of TDS withdrawn by the PVU pumping wells were consistently about 26 percent less than observed values for all the simulated time periods (33-year simulation, pre-PVU, and post-PVU). The representation of brine inflow was explored through additional modeling to evaluate the effect of the simulated brine source on groundwater TDS concentrations. Results indicated that a saturated-salt constant-flux brine source best replicated the magnitude and transient pattern observed for TDS mass flux from PVU pumping wells. The simulated TDS mass flux to the Dolores River is compared to estimates based on observed streamflow and specific conductance (SC) data for the downstream streamgage. The calibrated model provided a close fit of simulated to measured streamflow at the downstream streamgage, and the calibrated model fit to estimated TDS concentrations at the downstream streamgage was reasonable. The greatest differences between simulated and estimated values occurred during drought periods from June 2000 to March 2003, May 2012 to June 2013, and October 2013 to October 2014, when simulated TDS concentrations in the river were greater than estimated concentrations. In general, simulated TDS mass flux to the river for the pre-PVU period is in good agreement with estimated values (2-percent difference), but the model overestimated TDS mass flux to the river by about 41 percent during the post-PVU period. The model uncertainty with respect to TDS mass flux to the river indicates other processes or model parameters not well represented by the model are affecting the system, especially during drought. During model calibration, the most sensitive parameters were identified as vertical hydraulic conductivity of the alluvial aquifer, conductance of the Dolores River streambed, ET extinction depth and rate, and recharge rate. Five 5-year scenarios of conditions for 2021–25 were simulated to assist evaluation of alternative strategies to manage the discharge of brine into the Dolores River. The first scenario simulates no PVU pumping and serves as a base case for comparison to the other scenarios. Two scenarios simulate the effects of varying withdrawal timing at an annual rate about one-third less than during 2010 through 2018. During high-flow spring snowmelt runoff periods when brine discharge is naturally minimized, PVU pumping does not substantially affect salinity in the Dolores River, and comparison of these two scenarios indicates that scheduling brine withdrawals during times of low river stage is nearly as effective at reducing TDS mass flux to the river as pumping brine year-round. Cessation of pumping during periods of high river stage may be advantageous for system maintenance, brine injection, and seismic-risk reduction. The fourth scenario tested the effect of reducing irrigation-return flow on brine discharge and predicted a slight reduction of TDS mass flux to the Dolores River, but not as great a reduction as that of using the PVU to remove brine. The fifth scenario simulated 5 years of drought conditions without PVU pumping and indicates brine discharge during drought about 15 percent greater than during average hydrologic conditions. Results from scenario 5 are consistent with the calibrated model results and indicate that aquifer properties and ET processes and parameters may be affecting simulation results during drought. The Paradox Valley groundwater model provides a reasonable overall match to observed conditions in the Dolores River. The model is useful for evaluating relative differences between brine management scenarios to inform PVU operational decisions and to identify gaps in data and process understanding. Representation of the brine source, hydraulic-conductivity parameters, and recharge and ET processes were identified as potential areas for additional field and modeling research. Additional research in the Paradox Valley might include field-data collection that provides additional information on the hydrogeologic framework, groundwater levels, groundwater TDS concentrations, stream characteristics, and aquifer properties. Additional modeling efforts could benefit from applying advanced tools for model development, calibration, and visualization including parameter-estimation and sensitivity analysis. Statistical evaluation of known model uncertainties such as hydraulic conductivity, streambed conductance, representations of the brine source, recharge, and ET could improve the match between simulated and estimated TDS mass flux from PVU pumping wells and to the Dolores River further informing model predictions and system understanding for the Paradox Valley.

Colorado↗
USGS2025

ShakeAlert®—Communication, education, outreach and technical engagement strategic vision

Executive Summary In 2006, the U.S. Geological Survey (USGS) began directly supporting ShakeAlert ® research and in 2012 the ShakeAlert demonstration system began testing ( Given and others, 2018 ). The ShakeAlert earthquake early warning (EEW) system is a partnership between the U.S. Geological Survey (USGS) and the three West Coast States (Washington, Oregon, and California) served by the ShakeAlert System, which is part of the larger Advanced National Seismic System (ANSS). With more than 143 million people exposed to potentially damaging shaking in the United States ( Jaiswal and others, 2015 ), earthquakes are a national hazard. Most of our Nation’s earthquake risk is concentrated in the highly populated areas on the active plate tectonic boundaries on the West Coast of the conterminous United States. ShakeAlert is the first public alert system in the United States to provide rapid mass notification of earthquake detection, potentially offering seconds of warning before strong shaking arrives. A few seconds may not seem like much time, but the information in ShakeAlert Messages can be used to trigger automated actions that can prevent injury or death, reduce immediate damage, and speed recovery from earthquakes. The information product issued by the ShakeAlert system is called a ShakeAlert Message and is one of the information products and tools of the ANSS. The ShakeAlert System includes the USGS component, plus the pathways by which ShakeAlert-powered products and (or) services are delivered to end users. Alerts can be delivered to cell phones or be used to trigger automated systems to protect equipment, facilities, and infrastructure, such as slowing or stopping a train. ShakeAlert-powered automated actions can include fire house doors that can be opened to prevent jamming, heavy equipment (for example, trains, elevators, and cranes) that can be automatically stopped or parked in safe positions, and pipeline valves that can be closed to prevent surges and spills. A few seconds of warning also may be sufficient for people to take protective actions, such as drop, cover, and hold on or modified protective actions for a broad range of populations. Advance training may increase the benefit of a speedy response to an alert. Outreach and education about EEW may raise awareness of the overall earthquake threat and how people can best react when they receive an alert or feel shaking. ShakeAlert communication, education, outreach, and technical engagement (CEO&TE) efforts are highly collaborative and essential for the success of the ShakeAlert System. This strategic vision informs how the vast ShakeAlert CEO&TE Community operates and works together. The CEO&TE Community delineates a strategic framework that is intended to set the path for a long-term, sustainable approach to CEO&TE through three focus areas and five priorities. Focus Areas Technical engagement.— The objective of this focus area is to expand and broaden ShakeAlert technical engagement and implementation. External engagement.— This focus area targets engagement in long-term communication, education, and outreach planning, implementation, and evaluation. Internal engagement.— The purpose of this focus area is to build and sustain a robust infrastructure to optimize collaboration, information sharing, and project planning among the community of stakeholders charged with implementing ShakeAlert CEO&TE. Priorities The enumeration of the five priorities listed below does not suggest priority ranking. Public safety, preparedness, and resilience; Technical implementation and engagement; Consistent messaging and communication; Integration with other Federal and State earthquake hazards products; and Educational resources development and dissemination. This strategic vision is a tangible outcome of collaboration among many stakeholders beginning in July 2016. Since then, the work of the ShakeAlert CEO&TE Community has grown into an international effort. The USGS has developed, tested, and implemented a broad spectrum of communication, education, and outreach tools and resources—all of which recognize that seconds matter when it comes to safety and mitigating harm from earthquake hazards. The CEO&TE social science research effort has provided invaluable insights into the ShakeAlert System’s human interface. USGS-licensed technical partners develop, test, and implement real-world applications using ShakeAlert Messages. The success of ShakeAlert CEO&TE efforts is predicated on robust collaboration across numerous agencies, organizations, and groups. As such, this strategic vision outlines a “partnership model” that delineates roles and responsibilities to ensure alignment with focus areas and priorities. The partnership model includes the CEO&TE lead agency (USGS); its principal partners (State agencies and university partners); its implementation partners (for example, technical partners who build systems to deliver ShakeAlert-powered products and (or) services [focus area one]), earthquake education partners who work to increase public preparedness for seismic events (focus area two); and other organizations that work together to enhance the adoption and effectiveness of the ShakeAlert System. These partners collaborate and convene through a variety of working groups and forums, which are also described in this strategic vision and align with focus area three (internal engagement). The CEO&TE Community collaboratively developed its operating principles and a consensus-based, decision-making strategic framework to guide its collective work. Performance metrics are used to continually measure success. Ultimately, the USGS and ShakeAlert CEO&TE Community are advancing the ShakeAlert System that as of the publication of this strategic vision to “provide earthquake early warning for all” serves more than 50 million people.

Circular↗
USGS2025

Scientific opportunities in the National Landscape Conservation System

The National Landscape Conservation System consists of unique and beautiful places across America’s landscapes where identified resources and values are protected and science is highlighted. The mission of the National Landscape Conservation System (NLCS), which is managed by the Bureau of Land Management and is often referred to as the agency’s National Conservation Lands, is to conserve, protect, and restore nationally significant landscapes for their cultural, ecological, and scientific values. This clear inclusion of science in the NLCS mission sets the stage for individual units to serve as places of learning, teaching, discovery, and innovation. Science is an integral part of managing the National Conservation Lands, and science conducted within and across the more than 900 units that make up the NLCS can inform and influence conservation and public land management well beyond its boundaries. Here, we highlight seven core aspects of National Conservation Lands that present valuable science opportunities: (1) the scientific values for which individual units are designated; (2) the many other resources, objects, and values within units; (3) the value of units as “control” sites for understanding the effects of activities such as mineral extraction that commonly occur elsewhere on multiple-use public lands but are often prohibited within National Conservation Lands; (4) the value of units for studying the effects of activities such as recreation that regularly occur and may be intensified on National Conservation Lands; (5) the high visibility of units, which draws strong interest and engagement from scientists, partners, and the public; (6) the functioning of the units as a network managed for a common purpose, which provides an opportunity to explore cross-cutting science questions across widely varying contexts and geographies; and (7) the opportunities units provide to promote and apply Indigenous Knowledge to scientific research to manage natural and cultural resources. Because of all of these characteristics, National Conservation Lands can serve as hubs for basic and applied science that can inform management of all public lands and resources into the future. We highlight these science opportunities through examples from existing units and suggest two actions that could help further science activities and impact on National Conservation Lands.

Parks Stewardship Forum↗
USGS2025

Metal fingerprints of Eocene rhyolite magmas coincident with Carlin-type gold deposition in Nevada USA

Eocene magmatic systems contemporaneous with world-class Carlin-type Au deposits in Nevada (USA) have been proposed by some researchers as a key ingredient for Au mineralization, though evidence conclusively demonstrating their genetic relationship remains tenuous. This study provides the first direct evidence of the pre-eruptive metal budget of volatile- and metal-charged silicic magmas coincident in time (~41 to 34 Ma) and space (within 5 km) with Carlin-type Au deposits. We characterize the pre-eruptive metal fingerprints of these diverse magmatic systems to assess their potential as sources of metals for Carlin-type Au mineralization. Metal abundances from quartz-hosted melt inclusions (Au, Te, Ag, Sb, Tl, Mo, W, Sn, As, Pb, Co, Cu, Ni, and Zn) characterized in situ by SHRIMP-RG and LA-ICP-MS represent our best (and only) estimates for the pre-eruptive metal budget in these systems. Median metal concentrations are generally within one order of magnitude of average upper crust and average continental rhyolite values. But there are two notable exceptions, with median Au contents extending >1 order of magnitude higher than average upper crust and median Cu contents ranging >1 order of magnitude lower than upper crust. Despite this, melts contain lower Au/Cu (<0.1), Au/Ag (<5), and Au/Tl (<0.3) than most ore-grade Carlin-type rock samples and quartz-hosted fluid inclusions, regardless of their age and timing relative to nearby Carlin-type Au mineralization. The metal fingerprints of these magmatic systems, de-fined both by traditional and multivariate compositional data analysis techniques, are distinct from one another. Yet none are particularly specialized, e.g., high Au/Cu, in terms of being ideal ingredients as postulated by magmatic models for Carlin-type Au mineralization. Magmatic Au contents do not appear to be correlated with rhyolite “flavors” in the way that Cu, Sn, and Nb contents are. Fluid/melt partitioning modeling and magma volume estimates support the idea that a diverse array of non-specialized silicic magmas could feasibly contribute some or potentially all of the Au, Ag, and Cu in Carlin-type systems. The compositional diversity among contemporaneous magmatic systems could possibly contribute to some of the diversity observed across Carlin-type Au districts in Nevada.

Nevada↗
USGS2025

Water supply in the conterminous United States, Alaska, Hawaii, and Puerto Rico, water years 2010–20

We present an assessment of water supply across the conterminous United States (CONUS), Alaska, Hawaii, and Puerto Rico covering water years 2010–20. Our analysis drew on two national hydrologic models, the National Hydrologic Model Precipitation-Runoff Modeling System and the Weather Research and Forecasting model hydrologic modeling system. Both models produced estimates of streamflow, evapotranspiration, soil moisture, snow water equivalent, and other hydrologic states and fluxes. The models were driven by the bias-adjusted 4-kilometer-resolution, long-term regional hydroclimate simulation over the conterminous United States dataset (CONUS404). We assessed spatial and temporal error distributions by comparing monthly simulations at the 12-digit hydrologic unit code and regional scale from both models against external benchmarking datasets. Results showed that average annual rainfall across the CONUS was 857 millimeters per year for the period of analysis, with water year 2012 the driest year (729 millimeters) and water year 2019 the wettest year (995 millimeters). Key interannual variability results included the following: (1) the California–Nevada hydrologic region had the highest variability in precipitation and snow accumulation, and (2) the Texas hydrologic region was among hydrologic regions with the highest variability in precipitation. We related interannual variability in precipitation to storage volumes in soil moisture, snow water equivalent, and lakes and reservoirs to highlight areas with little storage and large year-to-year variability in precipitation. These areas included the Southern High Plains, Central High Plains, Texas, Souris–Red–Rainy, Mississippi Embayment, and Midwest regions. Our analysis of groundwater-level data showed that several of these areas overlap aquifers where groundwater levels were considerably lower than historical averages, including the Colorado Plateaus aquifers, the Rio Grande aquifer system, and the Central and Southern regions of the High Plains aquifer. Many of these lowered groundwater levels are continuations of decades-long declines from overpumping that started well before the assessment period. The resulting water budgets and their analyses provide a high-resolution foundational assessment of the mean state and variability of the terrestrial hydrologic cycle across the CONUS and Alaska, Hawaii, and Puerto Rico to support a wide range of water resource management applications.

Professional Paper↗
USGS2026

Comparative assessment of STIC sensors, streamflow and rain gauges for quantifying river connectivity in intermittent systems

In intermittent stream systems, including those occurring in Texas, USA, the severity of low-flow conditions, duration of seasonal disconnection, and frequency of no-flow events have been amplified by drought. Documentation of these no-flow events is necessary to evaluate ecosystem health. However, many intermittent reaches remain un-gauged given that perennial river sec-tions are often prioritized for gauge placement. Our objectives were to 1) document stream flow using Stream Temperature, Intermittency, and Conductivity (STIC) loggers to determine the frequency and duration of no-flow events in intermittent tributaries of the Colorado River, Texas and 2) compare logger data to publicly available data from streamflow discharge and precipitation gauge networks to understand differences among these data types for drying event characterization. We use these comparisons to summarize benefits and limitations of the application of in-stream data loggers. STIC loggers were deployed at 19 sites, one in each pool and riffle habitat of a stream reach. STIC loggers recorded a measurement of relative conductance every six hours from June 2022 to March 2024, which was used to determine the presence or absence of flow connectivity in a reach. No-flow duration among intermittent reaches varied between 37 and 270 days across tributaries during an ongoing drought in the study area. Overall, logger data was more precise than discharge data for characterizing no-flow events or precipitation data when documenting presence of water in the stream channel due to runoff. Lack of discharge gauges in intermittent tributaries left large sections of stream reaches undocumented and resulted in mischaracterization of flow patterns. Drought severity across the tributaries did not follow longitudinal patterns that would be expected by the climatic precipitation gradient of the study area. More research is needed to determine if factors such as population size affect severity. Likewise, precipitation data did not correlate well with logger water presence data, lacking consideration for groundwater recharge, soil hydrophobicity, and surface compaction. This study shows that to monitor no-flow events, detailed spatial datasets are necessary and that STIC loggers are useful tools that provide data to fill spatial information gaps and facilitate more accurate flow characterization and water presence data in intermittent systems.

Texas↗
USGS2025

Update of the 2008 provisional Enhanced Geothermal Systems (EGS) assessment for the Great Basin, USA

In response to the Energy Act of 2020, the U.S. Geological Survey (USGS) is updating the Enhanced Geothermal Systems (EGS) resource assessment for the Great Basin, USA. The previous 2008 provisional assessment estimated how much electricity could be generated from EGS resources of the western United States using models of electric-grade heat, models of heat extraction over time, and estimates of how much rock might be stimulated to produce viable amounts of heat. Herein, a similar conceptual strategy is applied, using updated models of heat extraction as a function of fracture spacing and well distance. Previously used reservoir heat delivery models are updated to have a dependence on fracture and well spacing, potentially improving future estimates of EGS resources as ongoing research provides a better understanding about the success of reservoir stimulation as a function of geology and location. For a range of well distances (250-1000 m) and fracture spacings (1-50 m), heat extraction efficiency ranges from 25-62%, demonstrating the importance of accounting for the most likely results of proven viable fracturing technologies. Although fracturing is important, the biggest uncertainty by far in estimating the EGS resource for the Great Basin is estimating which geologic units at what depths can be stimulated sufficiently to produce geothermal energy economically and efficiently. Uncertainties in these factors yield estimates that range over two orders of magnitude with an upper limit of ~174 terawatts-thermal (TWth) produced for 30 years from the upper 7 km of the crust. This upper limit would require significant technological advances to access most of the electric-grade resource across the Great Basin. Assuming that 1% of this estimate will be accessible in the next few decades gives a resource estimate similar to that made in the 2008 provisional assessment. These estimated EGS heat extraction rates far exceed ( greater than 100x) the natural geothermal heat production rate, thus geothermal electricity production at these rates might not be sustainable unless heat is also recharged from other sources (e.g., excess solar energy when supply exceeds demand). In addition to assessment maps and cumulative estimates, the new models of fractured reservoirs developed herein can be used to estimate steady power production given a set of fractures and well spacing, and estimates can be made for setback distances to ensure no thermal interference with nearby powerplants.

Arizona, California, Idaho, Nevada, Oregon, Utah↗
USGS2024

Simulation of groundwater flow in the Long Island, New York regional aquifer system for pumping and recharge conditions from 1900 to 2019

The U.S. Geological Survey has developed a transient, groundwater-flow model that simulates hydrologic conditions in the Long Island aquifer system as part of an ongoing (since 2016) multiyear, cooperative investigation with the New York State Department of Environmental Conservation. The goals of this investigation are to assist stakeholders and resource managers to evaluate the response of the hydrologic system to changes in future hydraulic stresses. Responses in the hydrologic system include changes in water levels in the hydrogeologic units; discharge to streams, coastal waters, and subsurface infrastructure; and the extent of saline groundwater in the aquifers. Hydraulic stresses include future water-supply management and changes in land use and infrastructure. The numerical model synthesizes a diverse set of physiographic, geologic, climatic, land-use, and historical population, water use, and infrastructure data to physically represent the Long Island aquifer system from land surface to bedrock and to simulate annual hydrologic conditions between 1900 and 2019. A three-dimensional hydrogeologic framework was developed from existing and recently collected borehole geologic and geophysical data collected as part of a companion drilling program. Water-transmitting properties of the principal aquifer sediments were defined in three dimensions from new and existing lithologic logs. The distribution of recharge from precipitation was estimated from landscape characteristics and climate data. Anthropogenic recharge from wastewater, leaky infrastructure, and storm runoff were estimated from population, infrastructure, and pumping data. Water-use data, including well locations, depths, and pumping rates, were obtained from historical sources and records and used to estimate pumping stresses continuously in time and space, at an annual average time scale. The data were incorporated into a three-dimensional numerical model using the U.S. Geological Survey finite difference modeling code MODFLOW 6; the model encompassed all of Long Island and surrounding surface waters and simulated historical hydrologic conditions from 1900 to 2019. The calibration process involved trial and error adjustments using prior knowledge to improve general fit to observations followed by an inverse calibration to update and optimize input parameters, using an iterative ensemble smoother algorithm implemented in PEST++ version 5.0. This resulted in a model that generally was in good agreement with observed, dynamically varying hydrologic conditions from 1900 to 2019. The calibrated model was used to develop two base-case models for scenario testing of future, hypothetical conditions where one represented average-annual conditions, and one represented average-seasonal conditions from 2010 to 2019. The model representing average-annual conditions was modified further to represent an alternate sea-level position of 6 feet above the North American Vertical Datum of 1988, and the model representing average-seasonal conditions was modified to represent the average seasonal effects of a 5-year drought imposed upon current hydrologic conditions. Recharge is the sole source of water to the aquifer system; groundwater discharges to coastal water and streams and is withdrawn by pumped wells. Model-estimated annual recharge ranged from about 11 inches in 1965 to 41 inches in 1983. On average, from 2010 to 2019, about 23 percent of water was pumped from wells, and about 47 and 27 percent discharged to coastal waters and streams, respectively; the remaining 4 percent was water that moved into storage in the aquifer matrix. Water levels on Long Island vary naturally during time in response to changes in recharge; the amount of variation is largest in the interior of the island, in areas with highest water table altitudes near groundwater divides and lowest near streams and the coastal waters. The total range of water table altitudes on Long Island between 1900 and 2019 ranged from near 0 to more than 70 feet in western parts of Long Island. The largest range in altitudes is in New York City and is associated with areas of large historical withdrawals between the 1920s and the late 1980s. Water table altitudes generally varied by less than 10 feet in eastern Suffolk County, where the aquifer is under more natural conditions. Saltwater intrusion is of great concern on Long Island, particularly in western Long Island where both the unconfined and confined parts of the aquifer system have been intruded in response to large-scale groundwater withdrawals; however, the volume of freshwater in the islandwide aquifer system only has changed by about 5 percent between 1900 and 2019. The decadal change in the freshwater volume was largest during the early and mid-20th century, corresponding to the largest historical pumping, but that volume change did not exceed 1 percent. The negligible change in freshwater volume suggests that saltwater intrusion as of 2019 was limited at an islandwide scale but continues to occur in local areas of Queens and Nassau Counties, adversely affecting current water supplies and limiting future water supplies for affected communities. The regional groundwater model developed for this investigation is a tool that can be used to help determine the viability of current and future water supplies at a regional scale and can be used to support development of additional models at finer scale to support more focused assessments of groundwater sustainability.

New York↗