USGS Science⌕ Search

SEARCH · USGS Science

Results for “Ground Water Modeling Investigation Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28Linked to original sources
USGS1995

Ground-water flow and the possible effects of remedial actions at J-Field, Aberdeen Proving Ground, Maryland

J-Field, located in the Edgewood Area of Aberdeen Proving Ground, Md, has been used since World War II to test and dispose of explosives, chemical warfare agents, and industrial chemicals resulting in ground-water, surface-water, and soil contami- nation. The U.S. Geological Survey finite-difference model was used to better understand ground-water flow at the site and to simulate the effects of remedial actions. A surficial aquifer and a confined aquifer were simulated with the model. A confining unit separates these units and is represented by leakance between the layers. The area modeled is 3.65 mi2; the model was constructed with a variably spaced 40 X 38 grid. The horizontal and lower boundaries of the model are all no-flow boundaries. Steady-state conditions were used. Ground water at the areas under investigation flows from disposal pit areas toward discharge areas in adjacent estuaries or wetlands. Simulations indicate that capping disposal areas with an impermeable cover effectively slows advective ground water flow by 0.7 to 0.5 times. Barriers to lateral ground-water flow were simulated and effectively prevented the movement of ground water toward discharge areas. Extraction wells were simulated as a way to contain ground-water contamination and to extract ground water for treatment. Two wells pumping 5 gallons per minute each at the toxic-materials disposal area and a single well pumping 2.5 gallons per minute at the riot-control-agent disposal area effectively contained contamination at these sites. A combi- nation of barriers to horizontal flow east and south of the toxic-materials disposal area, and a single extraction well pumping at 5 gallons per minute can extract contaminated ground water and prevent pumpage of marsh water.

Water-Resources Investigations Report↗
USGS1995

Simulation of ground-water flow in the Albuquerque Basin, central New Mexico, 1901-1994, with projections to 2020

This report describes a three-dimensional finite-difference ground-water-flow model of the Santa Fe Group aquifer system in the Albuquerque Basin, which comprises the Santa Fe Group (late Oligocene to middle Pleistocene age) and overlying valley and basin-fill deposits (Pleistocene to Holocene age). The model is designed to be flexible and adaptive to new geologic and hydrologic information as it becomes available, by using a geographic information system as a data-base manager to interface with the model. The aquifer system was defined and quantified in the model consistent with the current (July 1994) understanding of the structural and geohydrologic framework of the basin. Rather than putting the model through a rigorous calibration process, discrepancies between simulated and measured responses in hydraulic head were taken to indicate that the understanding of a local part of the aquifer system was incomplete or incorrect. The model simulates ground-water flow over an area of about 2,400 square miles to a depth of 1,730 to about 2,020 feet below the water table with 244 rows, 178 columns, and 11 layers. Of the 477,752 cells in the model, 310,376 are active. The top four model layers approximate the 80- foot thickness of alluvium in the incised and refilled valley of the Rio Grande to provide detail of the effect of ground-water withdrawals on the surface-water system. Away from the valley, these four layers represent the interval within the Santa Fe Group aquifer system between the computed predevelopment water table and a level 80 feet below the grade of the Rio Grande. The simulations include initial conditions (steady-state), the 1901-1994 historical period, and four possible ground-water withdrawal scenarios from 1994 to 2020. The model indicates that for the year ending in March 1994, net surface-water loss in the basin resulting from the City of Albuquerque's ground-water withdrawal totaled about 53,000 acre-feet. The balance of the about 123,000 acre-feet of withdrawal came from aquifer storage depletion (about 67,800 acre-feet) and captured or salvaged evapotranspiration (about 2,500 acrefeet). In the four scenarios projected from 1994 to 2020, City of Albuquerque annual withdrawals ranged from about 98,700 to about 177,000 acre-feet by the year 2020. The range of resulting surface-water loss was from about 62,000 to about 77,000 acre-feet. The range of aquifer storage depletion was from about 33,400 to about 95,900 acre-feet. Captured evapotranspiration and drain-return flow remained nearly constant for all scenarios. From 1994 to 2020, maximum projected declines in hydraulic head in the primary water-production zone of the aquifer (model layer 9) for the four scenarios ranged from 55 to 164 feet east of the Rio Grande and from 91 to 258 feet west of the river. Average declines in a 383.7-square-mile area around Albuquerque ranged from 28 to 65 feet in the production zone for the same period.

New Mexico↗
USGS1999

Ground-water system, estimation of aquifer hydraulic properties, and effects of pumping on ground-water flow in Triassic sedimentary rocks in and near Lansdale, Pennsylvania

Ground water in Triassic-age sedimentary fractured-rock aquifers in the area of Lansdale, Pa., is used as drinking water and for industrial supply. In 1979, ground water in the Lansdale area was found to be contaminated with trichloroethylene, tetrachloroethylene, and other man-made organic compounds, and in 1989, the area was placed on the U.S. Environmental Protection Agency's (USEPA) National Priority List as the North Penn Area 6 site. To assist the USEPA in the hydrogeological assessment of the site, the U.S. Geological Survey began a study in 1995 to describe the ground-water system and to determine the effects of changes in the well pumping patterns on the direction of ground-water flow in the Lansdale area. This determination is based on hydrologic and geophysical data collected from 1995-98 and on results of the simulation of the regional ground-water-flow system by use of a numerical model. Correlation of natural-gamma logs indicate that the sedimentary rock beds strike generally northeast and dip at angles less than 30 degrees to the northwest. The ground-water system is confined or semi-confined, even at shallow depths; depth to bedrock commonly is less than 20 feet (6 meters); and depth to water commonly is about 15 to 60 feet (5 to 18 meters) below land surface. Single-well, aquifer-interval-isolation (packer) tests indicate that vertical permeability of the sedimentary rocks is low. Multiple-well aquifer tests indicate that the system is heterogeneous and that flow appears primarily in discrete zones parallel to bedding. Preferred horizontal flow along strike was not observed in the aquifer tests for wells open to the pumped interval. Water levels in wells that are open to the pumped interval, as projected along the dipping stratigraphy, are drawn down more than water levels in wells that do not intersect the pumped interval. A regional potentiometric map based on measured water levels indicates that ground water flows from Lansdale towards discharge areas in three drainages, the Wissahickon, Towamencin, and Neshaminy Creeks. Ground-water flow was simulated for different pumping patterns representing past and current conditions. The three-dimensional numerical flow model (MODFLOW) was automatically calibrated by use of a parameter estimation program (MODFLOWP). Steady-state conditions were assumed for the calibration period of 1996. Model calibration indicates that estimated recharge is 8.2 inches (208 millimeters) and the regional anisotropy ratio for the sedimentary-rock aquifer is about 11 to 1, with permeability greatest along strike. The regional anisotropy is caused by up- and down-dip termination of high-permeability bed-oriented features, which were not explicitly simulated in the regional-scale model. The calibrated flow model was used to compare flow directions and capture zones in Lansdale for conditions corresponding to relatively high pumping rates in 1994 and to lower pumping rates in 1997. Comparison of the 1994 and 1997 simulations indicates that wells pumped at the lower 1997 rates captured less ground water from known sites of contamination than wells pumped at the 1994 rates. Ground-water flow rates away from Lansdale increased as pumpage decreased in 1997. A preliminary evaluation of the relation between ground-water chemistry and conditions favorable for the degradation of chlorinated solvents was based on measurements of dissolved-oxygen concentration and other chemical constituents in water samples from 92 wells. About 18 percent of the samples contained less than or equal to 5 milligrams per liter dissolved oxygen, a concentration that indicates reducing conditions favorable for degradation of chlorinated solvents.

Water-Resources Investigations Report↗
USGS1996

Age of ground water in basalt aquifers near Spring Creek National Fish Hatchery, Skamania County, Washington

Water samples from four springs and five wells in basalt aquifers near Spring Creek National Fish Hatchery in Skamania County, Washington, were collected and analyzed for selected inorganic ions and stable isotopes. Eight samples were analyzed for carbon-14 (14C), carbon-13 ([3C), and either chlorofluorocarbons (CFCs) or tritium. This work was done to estimate the age (residence time, or time elapsed since recharge) of water issuing from springs at the hatchery. If CFCs are present in ground water, the presence of at least a component of modem (post- 1944) water is indicated. CFC-dating suggests that ground water several hundred feet below land surface in the Underwood Heights area noah of the hatchery, including ground water discharging from the hatchery springs, contains modem water. In contrast, CFC-dating suggests that deeper ground water such as that withdrawn from the Hatchery Well may contain little or no modem water. Concentrations of 14C in water can yield 14C-based ground-water ages, termed 14C-model ages. Unadjusted 14C-model ages (14C-model ages unadjusted for carbon mass transfers) for water discharging from the hatchery springs are on the order of several hundred years. Ground-water samples from three wells in the Underwood Heights area yielded 14C-model ages ranging from modem to several hundred years. Unadjusted 14C-model ages for deep ground water pumped by the Hatchery Well indicate an overall age of several thousand years. However, 14C concentrations may be affected by transfers of carbon into and out of solution. The 13C values of the downgradient ground waters ranged from - 16.4 (per mil) to -18.2 per rail, isotopically heavier than expected for ground water that obtains carbon solely from root respiration in a temperate climate and undergoes no subsequent carbon-isotope fractionation or exchange. Such 13C values in the ground water near the hatchery suggest the possibility of carbon mass transfers during the evolution of these waters. Geochemical mass-transfer modeling suggests that carbon dioxide may degas and calcite may dissolve during the evolution of the modeled ground waters, but that degassing of carbon dioxide is the dominant carbon mass transfer in these ground waters. In addition, modeling results also suggest that, although some calcite may dissolve during the evolution of the water produced by the Hatchery Well, and possibly during the evolution of the shallower ground waters, the amount of calcite dissolution is small. Model testing suggests that the quantity of 14C-dead carbon added from calcite dissolution may not be sufficient to greatly affect the 14C-model ages of these ground waters. In other words, the 14C-model ages that were adjusted for various modeled carbon mass transfers are similar to the unadjusted 14C-model ages. A comparison of CFC data with both adjusted and unadjusted 14C data suggests that water discharging at the hatchery springs contains a mixture of modem and old water, where old water is defined as water recharged prior to 1944. The CFC data support a component of modem water, whereas the 14C data suggest a component of old water. Similar results were obtained from a comparison of CFC data with adjusted and unadjusted 14C data for water collected from Well 3. Well 3 is north of the hatchery springs, on a flow path that appears to be parallel to and similar in length to the flow path leading to the hatchery springs. Water from the Hatchery Well, however, may be devoid of modem water and appears to have an overall age on the order of thousands of years.

Washington↗
USGS2008

Documentation of Computer Program INFIL3.0 - A Distributed-Parameter Watershed Model to Estimate Net Infiltration Below the Root Zone

This report documents the computer program INFIL3.0, which is a grid-based, distributed-parameter, deterministic water-balance watershed model that calculates the temporal and spatial distribution of daily net infiltration of water across the lower boundary of the root zone. The bottom of the root zone is the estimated maximum depth below ground surface affected by evapotranspiration. In many field applications, net infiltration below the bottom of the root zone can be assumed to equal net recharge to an underlying water-table aquifer. The daily water balance simulated by INFIL3.0 includes precipitation as either rain or snow; snowfall accumulation, sublimation, and snowmelt; infiltration into the root zone; evapotranspiration from the root zone; drainage and water-content redistribution within the root-zone profile; surface-water runoff from, and run-on to, adjacent grid cells; and net infiltration across the bottom of the root zone. The water-balance model uses daily climate records of precipitation and air temperature and a spatially distributed representation of drainage-basin characteristics defined by topography, geology, soils, and vegetation to simulate daily net infiltration at all locations, including stream channels with intermittent streamflow in response to runoff from rain and snowmelt. The model does not simulate streamflow originating as ground-water discharge. Drainage-basin characteristics are represented in the model by a set of spatially distributed input variables uniquely assigned to each grid cell of a model grid. The report provides a description of the conceptual model of net infiltration on which the INFIL3.0 computer code is based and a detailed discussion of the methods by which INFIL3.0 simulates the net-infiltration process. The report also includes instructions for preparing input files necessary for an INFIL3.0 simulation, a description of the output files that are created as part of an INFIL3.0 simulation, and a sample problem that illustrates application of the code to a field setting. Brief descriptions of the main program routine and of each of the modules and subroutines of the INFIL3.0 code, as well as definitions of the variables used in each subroutine, are provided in an appendix.

Scientific Investigations Report↗
USGS2004

Simulation of ground-water flow, surface-water flow, and a deep sewer tunnel system in the Menomonee Valley, Milwaukee, Wisconsin

Numerical models were constructed for simulation of ground-water flow in the Menomonee Valley Brownfield, in Milwaukee, Wisconsin. An understanding of ground-water flow is necessary to develop an efficient program to sample ground water for contaminants. Models were constructed in a stepwise fashion, beginning with a regional, single-layer, analytic-element model (GFLOW code) that provided boundary conditions for a local, eight layer, finite-difference model (MODFLOW code) centered on the Menomonee Valley Brownfield. The primary source of ground water to the models is recharge over the model domains; primary sinks for ground water within the models are surface-water features and the Milwaukee Metropolitan Sewerage District Inline Storage System (ISS). Calibration targets were hydraulic heads, surface-water fluxes, vertical gradients, and ground-water infiltration to the ISS. Simulation of ground-water flow by use of the MODFLOW model indicates that about 73 percent of recharge within the MODFLOW domain circulates to the ISS and 27 percent discharges to gaining surface-water bodies. In addition, infiltration to the ISS comes from the following sources: 36 percent from recharge within the model domain, 45 percent from lateral flow into the domain, 15 percent from Lake Michigan, and 4 percent from other surface-water bodies. Particle tracking reveals that the median traveltime from the recharge point to surface-water features is 8 years; the median time to the ISS is 255 years. The traveltimes to the ISS are least over the northern part of the valley, where dolomite is near the land surface. The distribution of traveltimes in the MODFLOW simulation is greatly influenced by the effective porosity values assigned to the various lithologies.

Wisconsin↗
USGS2004

Death Valley regional ground-water flow system, Nevada and California -- hydrogeologic framework and transient ground-water flow model

A numerical three-dimensional (3D) transient ground-water flow model of the Death Valley region was developed by the U.S. Geological Survey for the U.S. Department of Energy programs at the Nevada Test Site and at Yucca Mountain, Nevada. Decades of study of aspects of the ground-water flow system and previous less extensive ground-water flow models were incorporated and reevaluated together with new data to provide greater detail for the complex, digital model. A 3D digital hydrogeologic framework model (HFM) was developed from digital elevation models, geologic maps, borehole information, geologic and hydrogeologic cross sections, and other 3D models to represent the geometry of the hydrogeologic units (HGUs). Structural features, such as faults and fractures, that affect ground-water flow also were added. The HFM represents Precambrian and Paleozoic crystalline and sedimentary rocks, Mesozoic sedimentary rocks, Mesozoic to Cenozoic intrusive rocks, Cenozoic volcanic tuffs and lavas, and late Cenozoic sedimentary deposits of the Death Valley Regional Ground-Water Flow System (DVRFS) region in 27 HGUs. Information from a series of investigations was compiled to conceptualize and quantify hydrologic components of the ground-water flow system within the DVRFS model domain and to provide hydraulic-property and head-observation data used in the calibration of the transient-flow model. These studies reevaluated natural ground-water discharge occurring through evapotranspiration and spring flow; the history of ground-water pumping from 1913 through 1998; ground-water recharge simulated as net infiltration; model boundary inflows and outflows based on regional hydraulic gradients and water budgets of surrounding areas; hydraulic conductivity and its relation to depth; and water levels appropriate for regional simulation of prepumped and pumped conditions within the DVRFS model domain. Simulation results appropriate for the regional extent and scale of the model were provided by acquiring additional data, by reevaluating existing data using current technology and concepts, and by refining earlier interpretations to reflect the current understanding of the regional ground-water flow system. Ground-water flow in the Death Valley region is composed of several interconnected, complex ground-water flow systems. Ground-water flow occurs in three subregions in relatively shallow and localized flow paths that are superimposed on deeper, regional flow paths. Regional ground-water flow is predominantly through a thick Paleozoic carbonate rock sequence affected by complex geologic structures from regional faulting and fracturing that can enhance or impede flow. Spring flow and evapotranspiration (ET) are the dominant natural ground-water discharge processes. Ground water also is withdrawn for agricultural, commercial, and domestic uses. Ground-water flow in the DVRFS was simulated using MODFLOW-2000, a 3D finite-difference modular ground-water flow modeling code that incorporates a nonlinear least-squares regression technique to estimate aquifer parameters. The DVRFS model has 16 layers of defined thickness, a finite-difference grid consisting of 194 rows and 160 columns, and uniform cells 1,500 m on each side. Prepumping conditions (before 1913) were used as the initial conditions for the transient-state calibration. The model uses annual stress periods with discrete recharge and discharge components. Recharge occurs mostly from infiltration of precipitation and runoff on high mountain ranges and from a small amount of underflow from adjacent basins. Discharge occurs primarily through ET and spring discharge (both simulated as drains) and water withdrawal by pumping and, to a lesser amount, by underflow to adjacent basins, also simulated by drains. All parameter values estimated by the regression are reasonable and within the range of expected values. The simulated hydraulic heads of the final calibrated transient model gener

Scientific Investigations Report↗
USGS1995

Hydrogeology and simulation of ground-water flow in the Eutaw-McShan aquifer and in the Tuscaloosa aquifer system in northeastern Mississippi

The Eutaw-McShan aquifer and Tuscaloosa aquifer system in northeastern Mississippi were investi- gated to better understand the hydrogeology and the ground-water flow in and between the aquifers. A numerical model was developed to simulate ground- water flow for prepumping and pumping conditions, and model simulatons projected the possible effects of increased ground-water withdrawals. The five aquifers studied, from youngest to oldest, are the Eutaw-McShan, Gordo, Coker, massive sand, and the Lower Cretaceous aquifers. The finite-difference computer code MODFLOW was used to represent the flow system. The model grid covers 33,440 square miles, primarily in northeastern Mississippi, but includes parts of northwestern Alabama, southwestern Tennessee, and eastern Arkansas. A comparison of the simulated predevelopment and 1992 potentiometric surfaces for the aquifers shows an overall water- level decline. Simulated water levels declined an average of 53 and 44 feet in the confined parts of the Eutaw-McShan and Gordo aquifers, respectively. However, the area near Tupelo had a significant rise in water levels due to decreased pumpage from the Eutaw-McShan and Gordo aquifers compared to the simulated potentiometric surface for 1978.

Mississippi↗
USGS1995

Geochemical processes in ground water resulting from surface mining of coal at the Big Sky and West Decker Mine areas, southeastern Montana

A potential hydrologic effect of surface mining of coal in southeastern Montana is a change in the quality of ground water. Dissolved-solids concen- trations in water in spoils aquifers generally are larger than concentrations in water in the coal aquifers they replaced; however, laboratory experiments have indicated that concentrations can decrease if ground water flows from coal-mine spoils to coal. This study was conducted to determine if decreases in concentrations occur onsite and, if so, which geochemical processes caused the decreases. Solid-phase core samples of spoils, unmined over- burden, and coal, and ground-water samples were collected from 16 observation wells at two mine areas. In the Big Sky Mine area, changes in ground- water chemistry along a flow path from an upgradient coal aquifer to a spoils aquifer probably were a result of dedolomitization. Dissolved-solids concentrations were unchanged as water flowed from a spoils aquifer to a downgradient coal aquifer. In the West Decker Mine area, dissolved-solids concentrations apparently decreased from about 4,100 to 2,100 milligrams per liter as water moved along an inferred flow path from a spoils aquifer to a downgradient coal aquifer. Geochemical models were used to analyze changes in water chemistry on the basis of results of solid-phase and aqueous geochemical characteristics. Geochemical processes postulated to result in the apparent decrease in dissolved-solids concentrations along this inferred flow path include bacterial reduction of sulfate, reverse cation exchange within the coal, and precipitation of carbonate and iron-sulfide minerals.

Montana↗
USGS2003

Probability of detecting elevated concentrations of nitrate in ground water in a six-county area of south-central Idaho

A probability map constructed for this study identified several areas in a six-county region of south-central Idaho with high probabilities of detecting elevated concentrations (greater than 2 milligrams per liter) of nitrate. An increasing proportion of Idaho’s ground water being used for drinking water and large increases in the inputs of nitrogen to ground water in Cassia, Gooding, Jerome, Lincoln, Minidoka, and Twin Falls Counties have prompted concerns about the quality of the resource. The probability map was constructed to assist regulatory and resource agencies in managing land use and protecting water resources. To construct the probability map, hydrogeologic and anthropogenic data were integrated with ground-water quality data in a geographic information system. The resulting data set contained land use, geology, precipitation, soil characteristics, depth to ground water, nitrogen input, and ground-water velocity information for each of the 1,365 samples collected from 1991 to 2001. Logistic regression analysis was used to determine the most statistically significant variables related to the detection of elevated nitrate concentrations. The resulting multivariate probability model showed that ground-water velocity, nitrogen input, precipitation, soil drainage, land use, and depth to ground water were significantly correlated with elevated nitrate concentrations. A subset of the water-quality data set was used to verify these results. Linear regression of the percentage of predicted probabilities of elevated nitrate concentrations and the actual percentage of elevated nitrate concentrations with the model data set and the verification data set both showed good correlations: r-squared values were 0.96 and 0.97, respectively. Statistical comparisons of both data sets showed that ground-water samples containing elevated nitrate concentrations had significantly higher probabilities of detection (p < 0.001) than samples without elevated nitrate concentrations. On the basis of these results, a map identifying the probability of detecting elevated nitrate concentrations was constructed. High-probability areas on the map coincided with regions of agricultural land use and high nitrogen input, except in southern Gooding County and western Jerome County. In these areas, high ground-water velocities representing a predominance of regional ground water resulted in a low probability of detecting elevated nitrate concentrations. Areas of poor prediction tended to be congregated along the transition zone between high and low ground-water velocities in Jerome and Gooding Counties, indicating a mix of regional and recently recharged ground water.

Idaho↗
USGS1996

Geohydrology and water quality of stratified-drift aquifers in the middle Connecticut River basin, west-central New Hampshire

A study was done by the U.S. Geological Survey, in cooperation with the New Hampshire Department of Environmental Services, Water Resources Division, to describe the geohydrology and water quality of stratified-drift aquifers in the Middle Connecticut River Basin, west-central New Hampshire Stratified-drift aquifers discontinuously underlie 123 mi2 (square miles) of the Middle Connecticut River Basin, which has a total drainage area of 987 mi 2. Saturated thicknesses of stratified drift in the study area are locally greater than 500 feet but generally are less than 100 feet. Aquifer transmissivity locally exceeds 4,000 ft2/d (feet squared per day) but is generally less than 1,000 ft2/d. In only 17.2 mi2 of the study area are the aquifers identified as having a transmissivity greater than 1,000 ft2/d. As of 1990, total groundwater withdrawals from stratified drift for municipal supply were about 1.5 Mgal/d (million gallons per day) in the study area. Many of the stratified-drift aquifers underlying the study area are not developed to their fullest potential. The geohydrologic investigation of the stratified-drift aquifers focused on aquifer properties, including aquifer boundaries; recharge, discharge, and direction of ground-water flow; saturated thickness and storage; and transmissivity. Surficial-geologic mapping assisted in the determination of aquifer boundaries. Data from more than 1,000 wells, test borings, and springs were used to prepare maps of water-table altitude, saturated thickness, and transmissivity of stratified drift. More than 11 miles of seismic-refraction profiling at 95 sites was used in the preparation of the water-table-altitude and saturated-thickness maps. Seismic-reflection data collected along 1.6 miles of Mascoma Lake also were used in preparation of the saturated-thickness maps. Four stratified-drift aquifers in the towns of Franconia, Haverhill, and Lisbon were analyzed to estimate the water availability on the basis of analytical ground-water model simulation based on the Theis confined-flow equation adjusted to account for boundary effects commonly associated with stratified-drift aquifers. Conservative estimates of water availability during a 180-day period of no recharge were estimated to be 1.9 Mgal/d for the Meadow Brook aquifer; 1.8 Mgal/d for the Ham Branch Brook aquifer; 1.5 Mgal/d for the Salmon Hole aquifer; and 1.4 Mgal/d for the Haverhill-French Pond aquifer. Water-availability estimates would be higher if periods of recharge were accounted for and if less conservative boundary conditions were used in the model. Results of analysis of water samples from 26 observation wells, 3 municipal water-supply wells, and 1 public-supply spring show that, with the exception of dissolved iron and manganese in some samples, water in the stratified-drift aquifers generally meets the U.S. Environmental Protection Agency's primary and secondary drinking-water standards.

New Hampshire↗
USGS2007

Simulation of the shallow ground-water-flow system near Grindstone Creek and the community of New Post, Sawyer County, Wisconsin

A two-dimensional, steady-state ground-water-flow model of Grindstone Creek, the New Post community, and the surrounding areas was developed using the analytic element computer code GFLOW. The parameter estimation code UCODE was used to obtain a best fit of the model to measured water levels and streamflows. The calibrated model was then used to simulate the effect of ground-water pumping on base flow in Grindstone Creek. Local refinements to the regional model were subsequently added in the New Post area, and local water-level data were used to evaluate the regional model calibration. The locally refined New Post model was also used to simulate the areal extent of capture for two existing water-supply wells and two possible replacement wells. Calibration of the regional Grindstone Creek simulation resulted in horizontal hydraulic conductivity values of 58.2 feet per day (ft/d) for the regional glacial and sandstone aquifer and 7.9 ft/d for glacial thrust-mass areas. Ground-water recharge in the calibrated regional model was 10.1 inches per year. Simulation of a golf-course irrigation well, located roughly 4,000 feet away from the creek, and pumping at 46 gallons per minute (0.10 cubic feet per second, ft3/s), reduced base flow in Grindstone Creek by 0.05 ft3/s, or 0.6 percent of the median base flow during water year 2003, compared to the calibrated model simulation without pumping. A simulation of peak pumping periods (347 gallons per minute or 0.77 ft3/s) reduced base flow in Grindstone Creek by 0.4 ft3/s (4.9 percent of the median base flow). Capture zones for existing and possible replacement wells delineated by the local New Post simulation extend from the well locations to an area south of the pumping well locations. Shallow crystalline bedrock, generally located south of the community, limits the extent of the aquifer and thus the southerly extent of the capture zones. Simulated steady-state pumping at a rate of 9,600 gallons per day (gal/d) from a possible replacement well near the Chippewa Flowage induced 70 gal/d of water from the flowage to enter the aquifer. Although no water-quality samples were collected from the Chippewa Flowage or the ground-water system, surface-water leakage into the ground-water system could potentially change the local water quality in the aquifer.

Wisconsin↗
USGS2001

Use of borehole and surface geophysics to investigate ground-water quality near a road-deicing salt-storage facility, Valparaiso, Indiana

Borehole and surface geophysics were used to investigate ground-water quality affected by a road-deicing salt-storage facility located near a public water-supply well field. From 1994 through 1998, borehole geophysical logs were made in an existing network of monitoring wells completed near the bottom of a thick sand aquifer. Logs of natural gamma activity indicated a uniform and negligible contribution of clay to the electromagnetic conductivity of the aquifer so that the logs of electromagnetic conductivity primarily measured the amount of dissolved solids in the ground water near the wells. Electromagnetic-conductivity data indicated the presence of a saltwater plume near the bottom of the aquifer. Increases in electromagnetic conductivity, observed from sequential logging of wells, indicated the saltwater plume had moved north about 60 to 100 feet per year between 1994 and 1998. These rates were consistent with estimates of horizontal ground-water flow based on velocity calculations made with hydrologic data from the study area. Ratios of chloride to bromide concentrations in water samples were used to distinguish sources of chloride in the ground water?whether from road-deicing salt, domestic wastewater, or natural occurrences. Water samples identified with the chloride/bromide ratios as being affected by road-deicing salt had concentrations of dissolved solids, chloride, and sodium many times the background levels for the study area. The largest concentrations were in water from wells near the salt-storage facility?12,400 to 12,800 milligrams per liter (mg/L) dissolved solids, 6,730 to 7,230 mg/L chloride, and 3,690 to 4,400 mg/L sodium. A conceptual, multi-layer model was developed to describe the vertical extent of the saltwater plume in the vicinity of the monitoring wells. A relation was derived between average borehole electromagnetic conductivity in the screened interval of the wells in the saltwater plume and concentrations of dissolved solids in water samples from those wells. This relation was used in the model to show borehole electromagnetic conductivity in transects of wells as a zone of saline water overlain by zones of brackish water and freshwater. The thickness and altitude of the zones of saline and brackish water decreased with increased distance from the salt-storage facility. Two surface surveys of terrain electromagnetic conductivity were used to map the horizontal extent of the saltwater plume in areas without monitoring wells. Background values of terrain conductivity were measured in an area where water-quality and borehole geophysical data did not indicate saline or brackish water. Based on a guideline from previous case studies, the boundaries of the saltwater plume were mapped where terrain conductivity was 1.5 times background. The extent of the saltwater plume, based on terrain conductivity, generally was consistent with the available water-quality and borehole electromagnetic-conductivity data and with directions of ground-water flow determined from water-level altitudes.

Indiana↗
USGS1983

Hydrologic and geomorphic studies of the Platte River basin

The channels of the Platte River and its major tributaries, the South Platte and North Platte Rivers in Colorado, Wyoming, and Nebraska, have undergone major changes in hydrologic regime and morphology since about 1860, when the water resources of the basin began to be developed for agricultural, municipal, and industrial uses. These water uses have continued to increase with growth in population and land development. Diversion of flow from channels, storage of water in reservoirs, and increased use of ground water have affected the distribution and timing of streamflows and the transport of fluvial sediments. All these factors have contributed to changes in channel geometry and the riverine environment. In 1979, the U.S. Geological Survey began investigations in the Platte River basin to determine the effects of water use on the hydrology and morphology of the Platte River and its major tributaries. These investigations also considered the relationship of hydrologic regime to factors that control or affect the habitat of migratory waterfowl in the Platte River valley. This volume brings together the results of several research studies on historical changes in channel morphology, surface-water hydrology, hydraulic geometry, sediment-transport and bedform processes, ground-water and surface-water relations, stochastic models of streamflow and precipitation, and methods for estimating discharge required to maintain channel width. In each of the studies, data on some segment of the Platte River hydrologic system were collected and interpreted. All the studies are interrelated; together they provide some degree of understanding of regime changes that are occurring. The hydrologic research described in the following chapters will be useful in decision-making pertaining to the management of water resources and migratory waterfowl habitats.

Colorado, Nebraska, Wyoming↗
USGS1998

Probability of detecting atrazine/desethyl-atrazine and elevated concentrations of nitrate (NO2+NO3-N) in ground water in the Idaho part of the upper Snake River basin

Draft Federal regulations may require that each State develop a State Pesticide Management Plan for the herbicides atrazine, alachlor, cyanazine, metolachlor, and simazine. This study developed maps that the Idaho State Department of Agriculture might use to predict the probability of detecting atrazine and desethyl-atrazine (a breakdown product of atrazine) in ground water in the Idaho part of the upper Snake River Basin. These maps can be incorporated in the State Pesticide Management Plan and help provide a sound hydrogeologic basis for atrazine management in the study area. Maps showing the probability of detecting atrazine/desethyl-atrazine in ground water were developed as follows: (1) Ground-water monitoring data were overlaid with hydrogeologic and anthropogenic data using a geographic information system to produce a data set in which each well had corresponding data on atrazine use, depth to ground water, geology, land use, precipitation, soils, and well depth. These data then were downloaded to a statistical software package for analysis by logistic regression. (2) Individual (univariate) relations between atrazine/desethyl-atrazine in ground water and atrazine use, depth to ground water, geology, land use, precipitation, soils, and well depth data were evaluated to identify those independent variables significantly related to atrazine/ desethyl-atrazine detections. (3) Several preliminary multivariate models with various combinations of independent variables were constructed. (4) The multivariate models which best predicted the presence of atrazine/desethyl-atrazine in ground water were selected. (5) The multivariate models were entered into the geographic information system and the probability maps were constructed. Two models which best predicted the presence of atrazine/desethyl-atrazine in ground water were selected; one with and one without atrazine use. Correlations of the predicted probabilities of atrazine/desethyl-atrazine in ground water with the percent of actual detections were good; r-squared values were 0.91 and 0.96, respectively. Models were verified using a second set of groundwater quality data. Verification showed that wells with water containing atrazine/desethyl-atrazine had significantly higher probability ratings than wells with water containing no atrazine/desethylatrazine (p <0.002). Logistic regression also was used to develop a preliminary model to predict the probability of nitrite plus nitrate as nitrogen concentrations greater than background levels of 2 milligrams per liter. A direct comparison between the atrazine/ desethyl-atrazine and nitrite plus nitrate as nitrogen probability maps was possible because the same ground-water monitoring, hydrogeologic, and anthropogenic data were used to develop both maps. Land use, precipitation, soil hydrologic group, and well depth were significantly related with atrazine/desethyl-atrazine detections. Depth to water, land use, and soil drainage were signifi- cantly related with elevated nitrite plus nitrate as nitrogen concentrations. The differences between atrazine/desethyl-atrazine and nitrite plus nitrate as nitrogen relations were attributed to differences in chemical behavior of these compounds in the environment and possibly to differences in the extent of use and rates of their application.

Idaho↗
USGS1995

Geohydrology and water quality of stratified-drift aquifers in the Contoocook River basin, south-central New Hampshire

Stratified-drift aquifers discontinuously underlie 121 mi2 (square miles) of the Contoocook River Basin, which has a total drainage area of 776 mi2. Maps of these aquifers, showing water-table configurations, saturated thicknesses, and transmissivities were prepared from well and test-hole data and seismic-refraction profiles. The distribution of stratified-drift aquifers is largely controlled by the Pleistocene glaciation process and the formation of multiple glacial lakes along the main stem of the Contoocook River. Locally, saturated thickness of stratified drift within these aquifers are as great as 200 feet. Estimated transmissivities exceed 8,000 ft2/d (squared feet per day) at three locations and is as high as 22,800 ft2/d at one location. Stratified-drift aquifers that have the greatest potential to supply additional amounts of water include the aquifers at Greenfield-Otter Brook and Hancock-Norway Pond. Potential yields to hypothetical supply wells were estimated for the Greenfield-Otter Brook, Hillsborough-Contoocook River, and Andover- Blackwater River aquifers by use of a analytical ground-water-flow model. The model results predict that the potential yields are greatest from the Greenfield-Otter Brook aquifer, yielding up to 1.85 gallons per day during half-year periods of no recharge. The effective ground-water recharge to the entire basin, which includes recharge to the till, bedrock, and stratified drift, is 13.9 in./yr (inches per year) (521 million gallons per day) on the basis of hydrograph separation of streamflow. The quality of water obtained from 11 observation wells and 10 municipal supply wells is generally suitable for drinking and most other domestic purposes. Ground water in the region has low alkalinity, is slightly acidic, and has low concentrations of dissolved solids. Concentrations of dissolved constituents in ground-water samples were generally less than the U.S. Environmental Protection Agency's primary and secondary maximum contaminant levels except for elevated iron concentrations (in water from six wells) and manganese concentrations in water from seven wells.

Water-Resources Investigations Report↗
USGS1999

Induced infiltration from the Rockaway River and water chemistry in a stratified-drift aquifer at Dover, New Jersey, with a section on modeling ground-water flow in the Rockaway River Valley

The vertical hydraulic conductivity per unit thickness (streambed leakance) of unconsolidated sediment immediately beneath the channel of the Rockaway River near a municipal well field at Dover, N.J., is between 0.2 and 0.6 feet per day per foot and is probably near the low end of this range. This estimate is based on evaluation of three lines of evidence: (1) Streamflow measurements, which indicated that induced infiltration of river water near the well field averaged 0.67 cubic feet per second; (2) measurements of the rate of downward propagation of diurnal fluctuations in dissolved oxygen and water temperature at three piezometers, which indicated vertical Darcian flow velocities of 0.6 and 1.5 feet per day, respectively; and (3) chemical mixing models based on stable isotopes of oxygen and hydrogen, which indicated that 30 percent of the water reaching a well near the center of the well field was derived from the river. The estimated streambed-leakance values are compatible with other aquifer properties and with hydraulic stresses observed over a 2-year period, as demonstrated by a set of six alternative groundwater flow models of the Rockaway River valley. Simulated water levels rose 0.5 to 1.7 feet near the well field when simulated streambed leakance was changed from 0.2 to 0.6 feet per day per foot, or when a former reach of the Rockaway River valley that is now blocked by glacial drift was simulated as containing a continuous sand aquifer (rather than impermeable till). Model recalibration to observed water levels could accommodate either of these changes, however, by plausible adjustments in hydraulic conductivity of 35 percent or less. The ground-water flow models incorporate a new procedure for simulating areal recharge, in which water available for recharge in any time interval is accepted as recharge only where the water level in the uppermost model layer is below land surface. Water rejected as recharge on upland hillsides is allowed to recharge aquifers at the base of the hillsides. Inclusion of uplands in models of valley-fill aquifers and use of the new procedure increases model complexity and data requirements, but automates the simulation of recharge to those aquifers from the uplands, even in transient-state simulations with multiple periods of varied stresses, and facilitates delineation of upland areas that contribute water to well fields. The area from which ground water flowed toward the Dover well field decreased with an increase in simulated streambed leakance or an increase in simulated hydraulic conductivity of upland till. Concentrations of solutes in ground water near the Dover well field reflect the mixing of native ground water with water infiltrated from the Rockaway River. Chemical reactions in the aquifer, chiefly the weathering of carbonate minerals by dissolved carbon dioxide, affect the pH and the concentrations of both solutes and dissolved gases. Concentrations of sodium, chloride, and sulfate appear to be related to man's activities, such as road deicing, or to decay of organic matter in the aquifer.

New Jersey↗
USGS2008

Estimating the Probability of Elevated Nitrate Concentrations in Ground Water in Washington State

Logistic regression was used to relate anthropogenic (manmade) and natural variables to the occurrence of elevated nitrate concentrations in ground water in Washington State. Variables that were analyzed included well depth, ground-water recharge rate, precipitation, population density, fertilizer application amounts, soil characteristics, hydrogeomorphic regions, and land-use types. Two models were developed: one with and one without the hydrogeomorphic regions variable. The variables in both models that best explained the occurrence of elevated nitrate concentrations (defined as concentrations of nitrite plus nitrate as nitrogen greater than 2 milligrams per liter) were the percentage of agricultural land use in a 4-kilometer radius of a well, population density, precipitation, soil drainage class, and well depth. Based on the relations between these variables and measured nitrate concentrations, logistic regression models were developed to estimate the probability of nitrate concentrations in ground water exceeding 2 milligrams per liter. Maps of Washington State were produced that illustrate these estimated probabilities for wells drilled to 145 feet below land surface (median well depth) and the estimated depth to which wells would need to be drilled to have a 90-percent probability of drawing water with a nitrate concentration less than 2 milligrams per liter. Maps showing the estimated probability of elevated nitrate concentrations indicated that the agricultural regions are most at risk followed by urban areas. The estimated depths to which wells would need to be drilled to have a 90-percent probability of obtaining water with nitrate concentrations less than 2 milligrams per liter exceeded 1,000 feet in the agricultural regions; whereas, wells in urban areas generally would need to be drilled to depths in excess of 400 feet.

Scientific Investigations Report↗