USGS Science⌕ Search

SEARCH · USGS Science

Results for “Geologic Notes”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28Linked to original sources
USGS1964

Selected hydrologic data, upper Sevier River basin, Utah

This report is intended to serve two purposes: (1) to make available to the public basic ground-water data useful in planning and studying development of water resources, and (2) to supplement an interpretive report that will be published later. Records were collected during 1961-63 by the U.S. Geological Survey in cooperation with the Utah State Engineer as a part of the investigation of ground-water conditions in the upper Sevier River basin, in parts of Garfield, Iron, Kane, Piute, and Sevier Counties, Utah. The interpretive material will be published in a companion report by Carl H. Carpenter, Gerald B. Robinson, Jr., and Louis J. Bjorklund. This report is most useful in predicting conditions likely to be found in areas that are being considered as well sites. The person considering the new well can spot the proposed site on plate 1 and examine the records of nearby wells and springs as shown in the tables. From table 1 he can find information on wells, including depth, diameter, water level, yield, drawdown, use of water, temperature of water, and depth of perforations. Table 2 gives information on springs such as yield, use of water, temperature, and improvements. From tables 1 and 2 he can note the type of material that yields water in the vicinity. Table 3 shows the historic fluctuations and trends of water levels. Table 4 shows the type of material penetrated by wells. From table 5 he can note the chemical quality of water from wells and springs, and from table 6, the chemical quality of surface water. If the reader decides from his examination that conditions are favorable, he can place an application to drill a well with the State Engineer. If the State Engineer believes unappropriated water is available, the application may be approved after minimum statutory requirements have been satisfied. The report is also useful when planning large-scale developments of water supply. This and other uses of the report will be helped by use of the interpretive report upon its release.

Utah↗
USGS2006

Integration of coral reef ecosystem process studies and remote sensing

Worldwide, local-scale anthropogenic stress combined with global climate change is driving shifts in the state of reef benthic communities from coral-rich to micro- or macroalgal-dominated (Knowlton, 1992; Done, 1999). Such phase shifts in reef benthic communities may be either abrupt or gradual, and case studies from diverse ocean basins demonstrate that recovery, while uncertain (Hughes, 1994), typically involves progression through successional stages (Done, 1992). These transitions in benthic community structure involve changes in community metabolism, and accordingly, the holistic evaluation of associated biogeochemical variables is of great intrinsic value (Done, 1992). Effective reef management requires advance prediction of coral reef alteration in the face of anthropogenic stress and change in the global environment (Hatcher, 1997a). In practice, this goal requires techniques that can rapidly discern, at an early stage, sublethal effects that may cause long-term increases in mortality (brown, 1988; Grigg and Dollar, 1990). Such methods would improve our understanding of the differences in the population, community, and ecosystem structure, as well as function, between pristine and degraded reefs. This knowledge base could then support scientifically based management strategies (Done, 1992). Brown (1988) noted the general lack of rigor in the assessment of stress on coral reefs and suggested that more quantitative approaches than currently exist are needed to allow objective understanding of coral reef dynamics. Sensitive techniques for the timely appraisal of pollution effects or generalized endemic stress in coral reefs are sorely lacking (Grigg and Dollar, 1990; Wilkinsin, 1992). Moreover, monitoring methods based on population inventories, sclerochronology, or reproductive biology tend to myopic and may give inconsistent results. Ideally, an improved means of evaluating reef stress would discriminate mortality due to natural causes from morality to anthropogenic causes (Brown, 1988). Models of coral reef ecosystems, parameterized by process measurements and scaled in time-space using remote sensing, have the potential to address pressing research questions that are central to devising valid management strategies (Grigg el al., 1984; Hatcher, 1997b). To attain this goal, ecosystem-level models that integrate studies of physical and chemical forcing with observed biological and geological responses are required. This interdisciplinary approach to understanding reef biogeochemical dynamics can allow investigations that integrate the scales of time and space (Hatcher, 1997a), thereby enabling prediction of coral reef change (Andréfouët and Payri, 2001). In turn, prediction of holistic ecosystem function within various environmental focusing scenarios has substantial promise in mitigating future disturbance. Indeed, management of coral reefs at the ecosystem level has been suggested as the only meaningful approach to preserving coral reefs (Bohnsack and Ault, 1996; Christensen et al., 1996).

Florida↗
USGS2000

Concentrations and loads of cadmium, lead, and zinc measured near the peak of the 1999 snowmelt-runoff hydrographs for 42 water-quality stations, Coeur d'Alene River basin, Idaho

The Remedial Investigation/Feasibility Study conducted by the U.S. Environmental Protection Agency within the Spokane River Basin of northern Idaho and eastern Washington included extensive data-collection activities to determine the nature and extent of trace-element contamination within the basin. The U.S. Geological Survey designed and implemented synoptic sampling of the 1999 snowmelt-runoff event at 42 water- quality stations during the 1999 water year. The distribution of the 42 stations was as follows: North Fork Coeur d’Alene River and tributaries, 4 stations; South Fork Coeur d’Alene River, 13 stations; Canyon, Ninemile, and Pine Creeks, 4 stations each; other tributaries to South Fork Coeur d’Alene River, 10 stations; and main stem Coeur d’Alene River, 3 stations. The objective was to synoptically collect discharge and water-quality data in order to significantly improve the estimation of trace-element loads from multiple contributing source areas during the snowmelt-runoff event. Discharge and water-quality data were collected near the peak discharge during late May 1999. Each station was sampled for whole-water recoverable and dissolved concentrations and loads of cadmium, lead, and zinc. Three general concentration levels of cadmium, lead, and zinc were noted among the 42 stations. Dissolved cadmium concentrations were less than 1 microgram per liter (μg/L) at 26 stations, exceeded 10 μg/L at 1 station, and ranged from 1 to 10 μg/L at the remaining 15 stations. Whole-water recoverable cadmium concentrations were less than 1 μg/L at 23 stations, exceeded 10 μg/L at 4 stations, and ranged from 1 to 10 μg/L at the remaining 15 stations. Dissolved lead concentrations were less than 1 μg/L at 22 stations, exceeded 10 μg/L at 7 stations, and ranged from 1 to 10 μg/L at the remaining 13 stations. Whole-water recoverable lead concentrations were less than 10 μg/L at 13 stations, exceeded 500 μg/L at 20 stations, and ranged from 10 to 500 μg/L at the remaining 9 stations. Dis- solved zinc concentrations were less than 10 μg/L at 14 stations, exceeded 500 μg/L at 6 stations, and ranged from 10 to 500 μg/L at the remaining 22 stations. Whole-water recoverable zinc concentrations were less than 10 μg/L at 9 stations, exceeded 500 μg/L at 15 stations, and ranged from 10 to 500 μg/L at the remaining 18 stations. The accounting of tributary loads between two South Fork stations at O’Brien Gulch and Pinehurst revealed differences between dissolved and whole-water recoverable loads, as well as differences among the three trace elements. Tributary loads accounted for an average of 29 percent (range of 27 to 31.6 percent) of the differences in whole-water recoverable loads of the three trace elements between the O’Brien Gulch and Pinehurst stations. This result implies that the main stem of the South Fork Coeur d’Alene River is an important source of sediment-associated trace elements under elevated streamflows. In the case of dissolved loads of cadmium and zinc, the tributary loads accounted for about one-half (range of 47.3 to 55 percent) of the differences between the two South Fork stations. As with whole-water recoverable loads, this result indicates an important source of dissolved cadmium and zinc within the main stem. The picture is much different for dissolved lead loads: About 94 percent of the load difference between the O’Brien Gulch and Pinehurst stations was accounted for by loads from the 13 tributaries. The Coeur d’Alene River near Harrison transported 924 pounds of dissolved lead per day, of which 82.8 pounds came from the South Fork and 11.7 pounds from the North Fork. Only 10.2 percent of the load at Harrison was measured at the Pinehurst and Enaville stations; therefore, a substantial load of dissolved lead is being contributed downstream from the confluence of the North and South Forks.

Idaho↗
USGS2018

Annotated bibliography of scientific research on greater sage-grouse published since January 2015

The greater sage-grouse ( Centrocercus urophasianus ; hereafter GRSG) has been a focus of scientific investigation and management action for the past two decades. The 2015 U.S. Fish and Wildlife Service listing determination of “not warranted” was in part due to a large-scale collaborative effort to develop strategies to conserve GRSG populations and their habitat and to reduce threats to both. New scientific information augments existing knowledge and can help inform updates or modifications to existing plans for managing GRSG and sagebrush ecosystems. However, the sheer number of scientific publications can be a challenge for managers tasked with evaluating and determining the need for potential updates to existing planning documents. To assist in this process, the U.S. Geological Survey (USGS) has reviewed and summarized the scientific literature published since January 1, 2015. To identify articles and reports published about GRSG, we first conducted a structured search of three reference databases (Web of Science, Scopus, and Google Scholar) using the search term “greater sage-grouse.” We refined the initial list of products by (1) removing duplicates, (2) excluding products that were not published as research or scientific review articles in peer-reviewed journals or as formal government technical reports, and (3) retaining only those products for which GRSG or their habitat was a research focus. We summarized the contents of each product by using a consistent structure (background, objectives, methods, location, findings, and implications) and assessed the content of each product relevant to a list of 31 management topics. These topics include GRSG biology and habitat characteristics along with potential management actions, land uses, and environmental factors related to GRSG management and conservation. We also noted which articles/reports created new geospatial data. The final search was conducted on January 6, 2018, and application of our criteria resulted in the inclusion of 169 published products (2 of these products were published corrections to journal articles). The management topics most commonly addressed were GRSG behavior or demographics and GRSG habitat selection or habitat characteristics at broad or site scales. Few products addressed captive breeding, recreation, wild horses and burros, and range management structures (including fences). We include in this annotated bibliography the full citation, product summary, and management topics addressed by each product. The online version of this bibliography ( https://apps.usgs.gov/gsgbib/index.php ) is searchable by topic and location and includes links to the original publications. A substantial body of literature has been compiled based on research explicitly related to the conservation, management, monitoring, and assessment of GRSG. These studies may inform planning and management actions that seek to balance conservation, economic, and social objectives and manage diverse resource uses and values across the western United States. The review process for this product included requesting input on each summary from one or more authors of the original peer-reviewed article or report and a formal review of the entire document by three independent reviewers and, subsequently, the USGS Bureau Approving Official. This process is consistent with USGS Fundamental Science Practices.

Open-File Report↗
USGS2024

Annotated bibliography of scientific research on Taeniatherum caput-medusae published from January 2010 to January 2022

Integrating recent scientific knowledge into management decisions supports effective natural resource management and can lead to better resource outcomes. However, finding and accessing scientific knowledge can be time consuming and costly. To assist in this process, the U.S. Geological Survey is creating a series of annotated bibliographies on topics of management concern for western lands. Previously published reports introduced a methodology for preparing annotated bibliographies to facilitate the integration of recent, peer-reviewed science into resource management decisions. Therefore, relevant text from those efforts is reproduced here to frame the presentation. Invasive annual grasses are widely distributed throughout the western United States and threaten native ecosystems by altering fire regimes, replacing native plants, and altering grazing patterns, often with tremendous associated costs. One invasive annual grass, Taeniatherum caput-medusae (hereafter, medusahead), was first documented in the United States in 1887 and has been identified as a species of management concern. Medusahead’s life history traits allow it to quickly and effectively dominate native plant communities, and it has already taken over millions of acres in western North America. Although medusahead can spread widely and disrupt ecosystem function, it has been studied less than other western invasive grass species. We compiled and summarized peer-reviewed journal articles, data products, and formal technical reports (such as U.S. Department of Agriculture Forest Service General Technical Reports and U.S. Geological Survey Open-File Reports) on medusahead, published between January 2010 and January 2022. We first performed a systematic search of three reference databases and three government databases using the search phrase “medusahead” OR “medusa head” OR “ Taeniatherum caput-medusae ” OR “ Taeniatherum caputmedusae ” OR “ Taeniatherum asperum .” We refined the initial list of products by removing (1) duplicates, (2) products not written in English, (3) publications that were not focused on North America, (4) publications that were not published as research, data products, or scientific review articles in peer-reviewed journals or as formal technical reports, and (5) products for which medusahead was not a research focus, or the study did not present new data or findings about medusahead. We summarized each product using a consistent structure (background, objectives, methods, location, findings, and implications) and identified the management topics (for example, species and population characteristics; habitat; and control and management efforts) addressed by each product. We also noted which publications included new geospatial data. The review process for this annotated bibliography included an initial internal colleague review of each summary, requesting input on each summary from an author of the original publication, and a formal peer review. Our initial searches resulted in 4,245 total products, of which 211 met our criteria for inclusion. The most commonly addressed management topics addressed in products summarized in the annotated bibliography were as follows: nonnative invasive plants, weed management, site-scale habitat characteristics, habitat restoration or reclamation, and cultural management of weeds. All published bibliographies, including the online version of this bibliography, are available at the Science for Resource Managers ( https://apps.usgs.gov/science-for-resource-managers ). This database is searchable by topic, location, and year and includes links to each original publication. The studies compiled and summarized here may inform planning and management actions that seek to maintain and restore sagebrush landscapes and associated native species across the western United States.

Open-File Report↗
USGS2008

Creating a Global Building Inventory for Earthquake Loss Assessment and Risk Management

Earthquakes have claimed approximately 8 million lives over the last 2,000 years (Dunbar, Lockridge and others, 1992) and fatality rates are likely to continue to rise with increased population and urbanizations of global settlements especially in developing countries. More than 75% of earthquake-related human casualties are caused by the collapse of buildings or structures (Coburn and Spence, 2002). It is disheartening to note that large fractions of the world's population still reside in informal, poorly-constructed & non-engineered dwellings which have high susceptibility to collapse during earthquakes. Moreover, with increasing urbanization half of world's population now lives in urban areas (United Nations, 2001), and half of these urban centers are located in earthquake-prone regions (Bilham, 2004). The poor performance of most building stocks during earthquakes remains a primary societal concern. However, despite this dark history and bleaker future trends, there are no comprehensive global building inventories of sufficient quality and coverage to adequately address and characterize future earthquake losses. Such an inventory is vital both for earthquake loss mitigation and for earthquake disaster response purposes. While the latter purpose is the motivation of this work, we hope that the global building inventory database described herein will find widespread use for other mitigation efforts as well. For a real-time earthquake impact alert system, such as U.S. Geological Survey's (USGS) Prompt Assessment of Global Earthquakes for Response (PAGER), (Wald, Earle and others, 2006), we seek to rapidly evaluate potential casualties associated with earthquake ground shaking for any region of the world. The casualty estimation is based primarily on (1) rapid estimation of the ground shaking hazard, (2) aggregating the population exposure within different building types, and (3) estimating the casualties from the collapse of vulnerable buildings. Thus, the contribution of building stock, its relative vulnerability, and distribution are vital components for determining the extent of casualties during an earthquake. It is evident from large deadly historical earthquakes that the distribution of vulnerable structures and their occupancy level during an earthquake control the severity of human losses. For example, though the number of strong earthquakes in California is comparable to that of Iran, the total earthquake-related casualties in California during the last 100 years are dramatically lower than the casualties from several individual Iranian earthquakes. The relatively low casualties count in California is attributed mainly to the fact that more than 90 percent of the building stock in California is made of wood and is designed to withstand moderate to large earthquakes (Kircher, Seligson and others, 2006). In contrast, the 80 percent adobe and or non-engineered masonry building stock with poor lateral load resisting systems in Iran succumbs even for moderate levels of ground shaking. Consequently, the heavy death toll for the 2003 Bam, Iran earthquake, which claimed 31,828 lives (Ghafory-Ashtiany and Mousavi, 2005), is directly attributable to such poorly resistant construction, and future events will produce comparable losses unless practices change. Similarly, multistory, precast-concrete framed buildings caused heavy casualties in the 1988 Spitak, Armenia earthquake (Bertero, 1989); weaker masonry and reinforced-concrete framed construction designed for gravity loads with soft first stories dominated losses in the Bhuj, India earthquake of 2001 (Madabhushi and Haigh, 2005); and adobe and weak masonry dwellings in Peru controlled the death toll in the Peru earthquake of 2007 (Taucer, J. and others, 2007). Spence (2007) after conducting a brief survey of most lethal earthquakes since 1960 found that building collapses remains a major cause of earthquake mortality and unreinforced masonry buildings are one of the mos

Open-File Report↗
USGS2016

Annualized earthquake loss estimates for California and their sensitivity to site amplification

Input datasets for annualized earthquake loss (AEL) estimation for California were updated recently by the scientific community, and include the National Seismic Hazard Model (NSHM), site‐response model, and estimates of shear‐wave velocity. Additionally, the Federal Emergency Management Agency’s loss estimation tool, Hazus, was updated to include the most recent census and economic exposure data. These enhancements necessitated a revisit to our previous AEL estimates and a study of the sensitivity of AEL estimates subjected to alternate inputs for site amplification. The NSHM ground motions for a uniform site condition are modified to account for the effect of local near‐surface geology. The site conditions are approximated in three ways: (1) by VS30 (time‐averaged shear‐wave velocity in the upper 30 m) value obtained from a geology‐ and topography‐based map consisting of 15 VS30 groups, (2) by site classes categorized according to National Earthquake Hazards Reduction Program (NEHRP) site classification, and (3) by a uniform NEHRP site class D. In case 1, ground motions are amplified using the Seyhan and Stewart (2014) semiempirical nonlinear amplification model. In cases 2 and 3, ground motions are amplified using the 2014 version of the NEHRP site amplification factors, which are also based on the Seyhan and Stewart model but are approximated to facilitate their use for building code applications. Estimated AELs are presented at multiple resolutions, starting with the state level assessment and followed by detailed assessments for counties, metropolitan statistical areas (MSAs), and cities. AEL estimate at the state level is ∼$3.7 billion, 70% of which is contributed from Los Angeles–Long Beach–Santa Ana, San Francisco–Oakland–Fremont, and Riverside–San Bernardino–Ontario MSAs. The statewide AEL estimate is insensitive to alternate assumptions of site amplification. However, we note significant differences in AEL estimates among the three sensitivity cases for smaller geographic units.

California↗
USGS2020

Temperature model in support of the U.S. Geological Survey National Crustal Model for seismic hazard Ssudies

The U.S. Geological Survey National Crustal Model (NCM) is being developed to assist with earthquake hazard and risk assessment by supporting estimates of ground shaking in response to an earthquake. The period-dependent intensity and duration of shaking depend upon the three-dimensional seismic velocity, seismic attenuation, and density distribution of a region, which in turn is governed to a large degree by geology and how that geology behaves under varying temperatures and pressures. A three-dimensional temperature model is presented here to support the estimation of physical parameters within the U.S. Geological Survey NCM. The crustal model is defined by a geological framework consisting of various lithologies with distinct mineral compositions. A temperature model is needed to calculate mineral density and bulk and shear modulus as a function of position within the crust. These properties control seismic velocity and impedance, which are needed to accurately estimate earthquake travel times and seismic amplitudes in earthquake hazard analyses. The temperature model is constrained by observations of surface temperature, temperature gradient, and conductivity, inferred Moho temperature and depth, and assumed conductivity at the base of the crust. The continental plate is assumed to have heat production that decreases exponentially with depth and thermal conductivity that exponentially changes from a surface value to 3.6 watts per meter-Kelvin at the Moho. The oceanic plate cools as a half-space with a geotherm dependent on plate age. Under these conditions, and the application of observed surface heat production, predicted Moho temperatures match Moho temperatures inferred from seismic P-wave velocities, on average. As has been noted in previous studies, high crustal temperatures are found in the western United States, particularly beneath areas of recent volcanism. In the central and eastern United States, elevated temperatures are found from southeast Texas, into the Mississippi Embayment, and up through Wisconsin. A USGS ScienceBase data release that supports this report is available and consists of grids covering the NCM across the conterminous United States, for example, surface temperature and temperature gradient, that are needed to produce temperature profiles.

Open-File Report↗
USGS2014

Dynamics of submarine groundwater discharge and associated fluxes of dissolved nutrients, carbon, and trace gases to the coastal zone (Okatee River estuary, South Carolina)

Multiple techniques, including thermal infrared aerial remote sensing, geophysical and geological data, geochemical characterization and radium isotopes, were used to evaluate the role of groundwater as a source of dissolved nutrients, carbon, and trace gases to the Okatee River estuary, South Carolina. Thermal infrared aerial remote sensing surveys illustrated the presence of multiple submarine groundwater discharge sites in Okatee headwaters. Significant relationships were observed between groundwater geochemical constituents and 226 Ra activity in groundwater with higher 226 Ra activity correlated to higher concentrations of organics, dissolved inorganic carbon, nutrients, and trace gases to the Okatee system. A system-level radium mass balance confirmed a substantial submarine groundwater discharge contribution of these constituents to the Okatee River. Diffusive benthic flux measurements and potential denitrification rate assays tracked the fate of constituents in creek bank sediments. Diffusive benthic fluxes were substantially lower than calculated radium-based submarine groundwater discharge inputs, showing that advection of groundwater-derived nutrients dominated fluxes in the system. While a considerable potential for denitrification in tidal creek bank sediments was noted, in situ denitrification rates were nitrate-limited, making intertidal sediments an inefficient nitrogen sink in this system. Groundwater geochemical data indicated significant differences in groundwater chemical composition and radium activity ratios between the eastern and western sides of the river; these likely arose from the distinct hydrological regimes observed in each area. Groundwater from the western side of the Okatee headwaters was characterized by higher concentrations of dissolved organic and inorganic carbon, dissolved organic nitrogen, inorganic nutrients and reduced metabolites and trace gases, i.e. methane and nitrous oxide, than groundwater from the eastern side. Differences in microbial sulfate reduction, organic matter supply, and/or groundwater residence time likely contributed to this pattern. The contrasting features of the east and west sub-marsh zones highlight the need for multiple techniques for characterization of submarine groundwater discharge sources and the impact of biogeochemical processes on the delivery of nutrients and carbon to coastal areas via submarine groundwater discharge.

South Carolina↗
USGS2011

U.S. Geological Survey (USGS) Earth Resources Observation and Science (EROS) Center-fiscal year 2010 annual report

The Earth Resources Observation and Science (EROS) Center is a U.S. Geological Survey (USGS) facility focused on providing science and imagery to better understand our Earth. The work of the Center is shaped by the earth sciences, the missions of our stakeholders, and implemented through strong program and project management, and application of state-of-the-art information technologies. Fundamentally, EROS contributes to the understanding of a changing Earth through 'research to operations' activities that include developing, implementing, and operating remote-sensing-based terrestrial monitoring capabilities needed to address interdisciplinary science and applications objectives at all levels-both nationally and internationally. The Center's programs and projects continually strive to meet, and where possible exceed, the changing needs of the USGS, the Department of the Interior, our Nation, and international constituents. The Center's multidisciplinary staff uses their unique expertise in remote sensing science and technologies to conduct basic and applied research, data acquisition, systems engineering, information access and management, and archive preservation to address the Nation's most critical needs. Of particular note is the role of EROS as the primary provider of Landsat data, the longest comprehensive global land Earth observation record ever collected. This report is intended to provide an overview of the scientific and engineering achievements and illustrate the range and scope of the activities and accomplishments at EROS throughout fiscal year (FY) 2010. Additional information concerning the scientific, engineering, and operational achievements can be obtained from the scientific papers and other documents published by EROS staff or by visiting our web site at http://eros.usgs.gov. We welcome comments and follow-up questions on any aspect of this Annual Report and invite any of our customers or partners to contact us at their convenience. To communicate with us, or for more information about EROS, contact: Communications and Outreach, USGS EROS Center, 47914 252nd Street, Sioux Falls, South Dakota 57198, jsnelson@usgs.gov, http://eros.usgs.gov/.

Open-File Report↗
USGS1999

Sora rail studies on the Patuxent River, Maryland

The freshwater marshes of the tidal Patuxent River are well known for their annual fall concentration of migrant soras ( Porzana carolina ) and were formerly the most famous rail hunting grounds in the Chesapeake Bay region. Because of concern over the apparent long-term decline in number of soras and the decline in the quality of the Patuxent marshes, especially the loss of wild rice ( Zizania aquatica ), the Maryland National-Capital Park and Planning Commission (MNCPPC), co-steward of the Jug Bay National Estuarine Research Reserve, sponsored rail-related research beginning in 1987. Past efforts focused on developing efficient trapping techniques, age and sex criteria, and monitoring body mass dynamics. Noted progress was made in developing digital playback systems and trap improvements to enhance sora captures. These improvements increased capture success by over an order of magnitude and resulted in capture of 2,315 soras and 276 Virginia rails ( Rallus limicola ) in the 5 year period, 1993-97. Although these methods demonstrate the efficacy of banding large numbers of soras on migration and possibly winter concentration areas, captures at the Patuxent River site have been 70-90% hatching-year birds and recoveries and recaptures have been virtually nonexistent. With the present effort, this outcome precludes population parameter estimation using traditional capture-recapture or recovery model methodologies. In 1996, studies were initiated to employ radio telemetry methods to investigate length of stay, habitat use, survival, and migration characteristics of fall migrant soras. These studies are ongoing and will be continued through 1998 with a grant from the U.S. Fish and Wildlife Service's Webless Migratory Game Bird Research Program and support from the U.S. Geological Survey's Patuxent Wildlife Research Center. Supplemental funding has also been provided by MNCPPC, FWS Region 5, the Maryland Ornithological Society, Quail Unlimited, and Prince Georges Community College. During 1996-97 we developed a successful radio transmitter attachment technique to secure 1.8g radio transmitters over the synsacrum of migrant soras. We modified Rappole and Tipton's (1991) leg-loop attachment method by addition of a waist loop to prevent soras from slipping transmitters over their short tails. Thin gauge (0.6 mm) elastic thread proved ideal for attachment and allowed for girth expansion associated with fattening during stopover. Sixty instrumented soras have been monitored in two years of study from early September until early November. Only a single mortality was recorded and 41 (68%) were confIrmed and another 13 (total 90%) were believed to have migrated from the study area. Only a single bird slipped a radio transmitter. Most birds demonstrated a sedentary nature in the marsh throughout stopover. Average length of stay was 44 days in 1997 (n=29) with peak departure occurring 20-24 October. Departing migrants were detected using a receiver/data-logger monitoring system placed 4 miles down river from the study site. Thirty-six of 37 (97%) soras departed in a 2-hour window of time, beginning 1 hour after sunset. Departure was synchronized with cold fronts on clear, starlit nights. Twenty-five soras were monitored on migration from 8 km to as far away as 770 km. Findings indicate migration flight speeds of 40 to 50 mph and a direct southward orientation from the study site at least until contact with the Atlantic Ocean west of Cape Lookout, North Carolina. We also attempted to monitor passage of migrant soras radio tagged at Iroquois National Wildlife Refuge in western New York by biologist Soch Lor. None were recorded passing a monitoring unit at Haldeman Island in the middle of the Susquehanna River 10 miles north of Harrisburg, Pennsylvania. This further corroborates our findings that when migrating overland, soras move in a direct southward orientation and are not following land features such as major rivers

Book chapter↗
USGS2004

Map showing geology, oil and gas fields, and geologic provinces of the Caribbean Region

This CD-ROM compilation contains a map and associated spatial data showing surface geology, faults, oil and gas field centerpoints, and geologic provinces of the Caribbean region, draped over a shaded relief image of topography and bathymetry. The map is provided in the Environmental Systems Research Institute, Inc. (ESRI) ArcMap and ArcReader GIS formats, as well as in Adobe Acrobat Portable Document Format (PDF). On this CD-ROM, ESRI ArcReader and Adobe Acrobat Reader software provide a way to view and interact with the maps. The organization and user-friendly navigation of this CD-ROM ensure easy access to its maps and data by using the links on the right side of each page. A link to the USGS World Energy Project website is also provided to access the latest information, updates, and interactive maps, as they relate to this and other world energy products. In addition, system requirements, permission, and contact information can be found in the readme section of this product. Navigation of this product can be fully utilized with most web browsers (Internet Explorer 6.0/Netscape Navigator 7.1 or later recommended). Note: an Internet connection is necessary to view USGS website links, World Energy website, and the Caribbean Internet Map Service.

Open-File Report↗
USGS2012

Compression map, functional groups and fossilization: A chemometric approach (Pennsylvanian neuropteroid foliage, Canada)

Nearly all of the spectrochemical studies involving Carboniferous foliage of seed-ferns are based on a limited number of pinnules, mainly compressions. In contrast, in this paper we illustrate working with a larger pinnate segment, i.e., a 22-cm long neuropteroid specimen, compression-preserved with cuticle, the compression map. The objective is to study preservation variability on a larger scale, where observation of transparency/opacity of constituent pinnules is used as a first approximation for assessing the degree of pinnule coalification/fossilization. Spectrochemical methods by Fourier transform infrared spectrometry furnish semi-quantitative data for principal component analysis. The compression map shows a high degree of preservation variability, which ranges from comparatively more coalified pinnules to less coalified pinnules that resemble fossilized-cuticles, noting that the pinnule midveins are preserved more like fossilized-cuticles. A general overall trend of coalified pinnules towards fossilized-cuticles, i.e., variable chemistry, is inferred from the semi-quantitative FTIR data as higher contents of aromatic compounds occur in the visually more opaque upper location of the compression map. The latter also shows a higher condensation of the aromatic nuclei along with some variation in both ring size and degree of aromatic substitution. From principal component analysis we infer correspondence between transparency/opacity observation and chemical information which correlate with varying degree to fossilization/coalification among pinnules.

Nova Scotia↗
USGS2009

Notes on the origin of inertinite macerals in coals: Observations on the importance of fungi in the origin of macrinite

Macrinite is a, generally, rare inertinite maceral, often incorporating remnants and fragments of other macerals, including vitrinite, liptinite, and other inertinite. The associated inertinites include multiple forms of funginite. Funginite is also commonly found in association with vitrinite of slightly elevated reflectance and with degraded varieties of vitrinite. Together with the highly degraded macrinite, the latter two associations are here inferred to be part of a continuum of fungal and microbial degradation of peat. In any case, the origin of some macrinite is potentially distinct from that of inertinite generated by fire. ?? 2009 Elsevier B.V. All rights reserved.

International Journal of Coal Geology↗
USGS1953

Airborne radioactivity survey of the Aspen Mountain area, Sweetwater county, Wyoming

The accompanying map shows the results of an airborne radioactivity survey covering 700 square miles in the Aspen Mountain area, Sweetwater county, Wyoming. The survey was made by the U.S. Geological Survey, October 22, 1952, as part of a cooperative program with the U.S. Atomic Energy Commission. The survey was made with scintillation-detection equipment mounted in a Douglas DC-3 aircraft. Parallel traverse lines, spaced at quarter-mile intervals, were flown approximately 500 feet above the ground. Aerial photographs were used for pilot guidance, and the flight path of the aircraft was recorded by a gyro-stabilized, continuous-strip-film camera. The distance of the aircraft from the ground was measured with a continuously recording radio altimeter. At 500 feet above the ground, the width of the zone from which anomalous radioactivity is measured varies with the intensity of radiation of the source and, for strong sources, the width would be as much as 1,400 feet. Quarter-mile spacing of the flight paths of the aircraft should be adequate to detect anomalies from strong sources of radioactivity. However, small areas of considerable radioactivity midway between flight paths may not be noted. The approximate location of each radioactivity anomaly is shown on the accompanying map. The plotted position of an anomaly may be in error by as much as a quarter of a mile owing to errors in the available base maps up to several square miles in which it is impossible to find and plot recognizable landmarks. The radioactivity anomaly that is recorded by airborne measurements at 500 feet above the ground can be caused by: 1. A moderately large area in which the rocks and soils are slightly more radioactive than the rocks and soils of the surrounding area. 2. A smaller area in which the rocks and soils are considerably more radioactive than rocks and soils in the surrounding area. 3. A very small area in which to rocks and soils are much more radioactive than the rocks and soils of the surrounding area. Any particular anomaly, therefore, may represent either slightly greater-than-average radioactivity over an area of a few thousand square feet, or high radioactivity over an area of a few hundred square feet. The radioactivity anomalies shown on the accompanying map indicate localities of more-than-average radioactivity, and therefore, suggest areas in which uranium or thorium deposits are more likely to occur.

Wyoming↗
USGS1953

Airborne radioactivity survey of the Tabernacle Buttes area, Sublette and Fremont counties, Wyoming

The accompanying map shows the results of an airborne radioactivity survey in an area of 670 square miles in Sublette and Fremont counties, Wyoming. The survey was made by the U.S. Geological Survey, October 20, 1952, as part of a cooperative program with the U.S. Atomic Energy Commission. The survey was made with scintillation-detection equipment mounted in a Douglas DC-3 aircraft. Parallel traverse lines, spaced at quarter-mile intervals, were flown approximately 500 feet above the ground. Aerial photographs were used for pilot guidance, and the flight path of the aircraft was recorded by a gyro-stabilized, continuous-strip-film camera. The distance of the aircraft from the ground was measured with a continuously recording radio altimeter. At 500 feet above the ground, the width of the zone from which anomalous radioactivity is measured varies with the intensity of radiation of the source and, for strong sources, the width would be as much as 1,400 feet. Quarter-mile spacing of the flight paths of the aircraft should be adequate to detect anomalies from strong sources of radioactivity. However, small areas of considerable radioactivity midway between flight paths may not be noted. The approximate location of each radioactivity anomaly is shown on the accompanying map. The plotted position of an anomaly may be in error by as much as a quarter of a mile owing to errors in the available base maps up to several square miles in which it is impossible to find and plot recognizable landmarks. The radioactivity anomaly that is recorded by airborne measurements at 500 feet above the ground can be caused by: 1. A moderately large area in which the rocks and soils are slightly more radioactive than the rocks and soils of the surrounding area. 2. A smaller area in which the rocks and soils are considerably more radioactive than rocks and soils in the surrounding area. 3. A very small area in which to rocks and soils are much more radioactive than the rocks and soils of the surrounding area. Any particular anomaly, therefore, may represent either slightly greater-than-average radioactivity over an area of a few thousand square feet, or high radioactivity over an area of a few hundred square feet. The radioactivity anomalies shown on the accompanying map indicate localities of more-than-average radioactivity, and therefore, suggest areas in which uranium or thorium deposits are more likely to occur.

Wyoming↗
USGS1953

Airborne radioactivity survey of the West Lonetree area, Uinta county, Wyoming

The accompanying map shows the results of an airborne radioactivity survey in an area of 154 square miles in Uinta county, Wyoming. The survey was made by the U.S. Geological Survey, October 23, 1952, as part of a cooperative program with the U.S. Atomic Energy Commission. The survey was made with scintillation-detection equipment mounted in a Douglas DC-3 aircraft. Parallel traverse lines, spaced at quarter-mile intervals, were flown approximately 500 feet above the ground. Aerial photographs were used for pilot guidance, and the flight path of the aircraft was recorded by a gyro-stabilized, continuous-strip-film camera. The distance of the aircraft from the ground was measured with a continuously recording radio altimeter. At 500 feet above the ground, the width of the zone from which anomalous radioactivity is measured varies with the intensity of radiation of the source and, for strong sources, the width would be as much as 1,400 feet. Quarter-mile spacing of the flight paths of the aircraft should be adequate to detect anomalies from strong sources of radioactivity. However, small areas of considerable radioactivity midway between flight paths may not be noted. The approximate location of each radioactivity anomaly is shown on the accompanying map. The plotted position of an anomaly may be in error by as much as a quarter of a mile owing to errors in the available base maps up to several square miles in which it is impossible to find and plot recognizable landmarks. The radioactivity anomaly that is recorded by airborne measurements at 500 feet above the ground can be caused by: 1. A moderately large area in which the rocks and soils are slightly more radioactive than the rocks and soils of the surrounding area. 2. A smaller area in which the rocks and soils are considerably more radioactive than rocks and soils in the surrounding area. 3. A very small area in which to rocks and soils are much more radioactive than the rocks and soils of the surrounding area. Any particular anomaly, therefore, may represent either slightly greater-than-average radioactivity over an area of a few thousand square feet, or high radioactivity over an area of a few hundred square feet. The radioactivity anomalies shown on the accompanying map indicate localities of more-than-average radioactivity, and therefore, suggest areas in which uranium or thorium deposits are more likely to occur.

Wyoming↗
USGS2011

User's manual for the National Water-Quality Assessment Program Invertebrate Data Analysis System (IDAS) software, version 5

The Invertebrate Data Analysis System (IDAS) software was developed to provide an accurate, consistent, and efficient mechanism for analyzing invertebrate data collected as part of the U.S. Geological Survey National Water-Quality Assessment (NAWQA) Program. The IDAS software is a stand-alone program for personal computers that run Microsoft Windows(Registered). It allows users to read data downloaded from the NAWQA Program Biological Transactional Database (Bio-TDB) or to import data from other sources either as Microsoft Excel(Registered) or Microsoft Access(Registered) files. The program consists of five modules: Edit Data, Data Preparation, Calculate Community Metrics, Calculate Diversities and Similarities, and Data Export. The Edit Data module allows the user to subset data on the basis of taxonomy or sample type, extract a random subsample of data, combine or delete data, summarize distributions, resolve ambiguous taxa (see glossary) and conditional/provisional taxa, import non-NAWQA data, and maintain and create files of invertebrate attributes that are used in the calculation of invertebrate metrics. The Data Preparation module allows the user to select the type(s) of sample(s) to process, calculate densities, delete taxa on the basis of laboratory processing notes, delete pupae or terrestrial adults, combine lifestages or keep them separate, select a lowest taxonomic level for analysis, delete rare taxa on the basis of the number of sites where a taxon occurs and (or) the abundance of a taxon in a sample, and resolve taxonomic ambiguities by one of four methods. The Calculate Community Metrics module allows the user to calculate 184 community metrics, including metrics based on organism tolerances, functional feeding groups, and behavior. The Calculate Diversities and Similarities module allows the user to calculate nine diversity and eight similarity indices. The Data Export module allows the user to export data to other software packages (CANOCO, Primer, PC-ORD, MVSP) and produce tables of community data that can be imported into spreadsheet, database, graphics, statistics, and word-processing programs. The IDAS program facilitates the documentation of analyses by keeping a log of the data that are processed, the files that are generated, and the program settings used to process the data. Though the IDAS program was developed to process NAWQA Program invertebrate data downloaded from Bio-TDB, the Edit Data module includes tools that can be used to convert non-NAWQA data into Bio-TDB format. Consequently, the data manipulation, analysis, and export procedures provided by the IDAS program can be used to process data generated outside of the NAWQA Program.

Techniques and Methods↗