USGS Science⌕ Search

SEARCH · USGS Science

Results for “Geoderma Regional”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

586 records · Page 28Linked to original sources
USGS2026

A ground-motion model derived using a generalized mean rupture distance for large slab interface earthquakes

Source–station distance is a central input to ground‐motion models (GMMs) for predicting seismic shaking. GMM development uses distance metrics including the Joyner–Boore distance, which is the shortest distance from an observation point to the surface projection of the earthquake rupture, and R rup the shortest distance to the rupture in three dimensions. Thompson and Baltay (2018) proposed the generalized mean rupture distance R p to address observed near‐fault ground‐motion saturation. R p accounts for the contribution to the shaking of all parts of the rupture and provides a simple method for incorporating spatially variable slip. They used R p to develop a GMM for shallow crustal earthquakes, assuming uniform slip. Here, we investigate the improvement offered by an R p ‐based GMM for large subduction interface earthquakes by recalibrating the path term for a published GMM ( Parker et al. , 2022 ) using R p derived from distributed slip models (DSMs). Inspection of within‐event and total residuals indicates that the recalibrated model fits the data at least as well as an alternative in which the path term was recalibrated using R rup and the same dataset. Incorporating slip information in its entirety or trimming the DSM geometry is preferable to assuming uniform moment release on a prescribed model fault that extends beyond the actual ruptured area. R p tuned to minimize model uncertainty is closer to the maximum distance to rupture for peak ground velocity (PGV) than acceleration, possibly reflecting the contribution to high‐frequency shaking of slip on local asperities. However, when the moment is concentrated far from stations, PGV is fit adequately with R p closer to R rup ⁠ . Our results suggest incorporating slip‐derived moment release through R p could improve GMMs for slab interface events, especially if the implementation of R p ‐based models is refined using a larger dataset of earthquakes with greater geographic diversity to account for regional ground‐motion variations.

Seismological Research Letters↗
USGS1995

Effects of waste-disposal practices on ground-water quality at five poultry (broiler) farms in north-central Florida, 1992-93

Waste-disposal areas such as chicken-house floors, litter stockpiles, fields that receive applications of litter, and dead-chicken pits are potential sources of nitrates and other chemical constituents in downward-percolating recharge water. Broiler- farms in north-central Florida are concentrated in a region where the Upper Floridan aquifer is unconfined and susceptible to contamination. Eighteen monitoring wells installed at five sites were sampled quarterly from March 1992 through January 1993. Increases in median concentrations of constituents relative to an upgradient well were used to determine the source of the nitrate at two sites. At these sites, increases in the median concentrations of nitrate as nitrogen in ground water in the vicinity of waste-disposal areas at these sites were: 5.4 mg/L for one chicken house; 9.0 mg/L for a second chicken house; 2.0 mg/L for a fallow field that received an application of litter; and, 2.0 mg/L for a dead-chicken pit. At the three remaining sites where the direction of local ground-water flow could not be ascertained, the sources of concentrations of nitrate and other constituents could not be determined. However, median nitrate concentrations in the vicinity of waste-disposal areas at these sites were: 45.5 mg/L for a set of two chicken houses; 3.0 mg/L for a stockpile area; and 2.1 mg/L for a hayfield that received an application of litter. The nitrate concentration in ground water in the vicinity of a field that had previously received heavy applications of litter increased from 3.0 mg/L to 105 mg/L approximately 4 months after receiving an application of commercial fertilizer. Increases in concentrations of organic nitrogen in ground water in the vicinity of waste-disposal areas may be related to the decomposition of litter and subsequent movement with downward percolating recharge water.

Florida↗
USGS2026

The potential impact of three-dimensional distributed slip models derived from real-time GNSS data on the performance of the ShakeAlert earthquake early warning system for slab interface earthquakes

The ShakeAlert® earthquake early warning (EEW) system is designed to warn users of imminent strong ground motion with sufficient time to take protective actions. ShakeAlert currently uses three algorithms to characterize the earthquake source. One estimates the location and magnitude using the first few seconds of the P wave and, while fast, tends to underestimate magnitude for M w 7.0+ earthquakes. A second estimates the location, orientation, length, and corresponding magnitude of a line source using observed peak ground acceleration and contributes primarily to M w 5.5+ earthquakes. The third infers earthquake magnitude from peak ground displacement measured using Global Navigation Satellite System (GNSS) data and offers nonsaturating magnitudes for M w 7.0+ earthquakes. Other EEW algorithms exist that infer temporally evolving spatially variable slip on a 3D fault surface from real‐time GNSS data, information that might enable more accurate and timely alerts in the event of large‐magnitude subduction interface earthquakes. Here, we evaluate the potential contribution of one such algorithm, BEFORES ( Minson et al. , 2014 ), to improve ShakeAlert performance through a simulated real‐time implementation of Bayesian evidence‐based fault orientation and real‐time earthquake slip (BEFORES) and other ShakeAlert algorithms using data for eight M w 7.6+ earthquakes. The test results demonstrate that BEFORES can produce well‐constrained and accurate magnitude estimates as soon as or sooner than other EEW algorithms, in turn enabling it to increase the amount of warning time users receive in many cases. However, with a modified Mercalli intensity (MMI) threshold of 3.5, which is commonly used for issuing alerts, BEFORES would tend to alert large geographic regions that did not feel strong shaking (MMI 6+). This effect can be mitigated using a higher alert threshold of MMI 4.5 without negative impact on the amount of warning time obtainable with BEFORES.

Bulletin of the Seismological Society of America↗
USGS2024

Seismic techniques and suggested instrumentation to monitor volcanoes

Introduction Changes in the pressure or location of magma can stress or break surrounding rocks and trigger flow of nearby waters and gases, causing seismic signals, such as discrete earthquakes and tremor. These phenomena are types of seismic unrest that commonly precede eruption and can be used to forecast volcanic activity. Mass movements at the surface, including avalanches, debris flows, and lahars, may also generate seismic signals that are specifically addressed in chapter H , this volume (Thelen and others, 2024). Our focus in this chapter is to determine the levels of instrumentation recommended to produce high-quality, well-constrained seismic observations important for early warning of impending eruptions, detecting changes in ongoing eruptions, and characterizing other hazardous volcanic events. There are emerging techniques and new types of instrumentation, such as distributed acoustic sensing or rotational seismometers, that we do not consider here. These types of instrumentation show promise for monitoring but still require maturation before being considered more generally in volcano monitoring. Most of the capabilities mentioned below are universal for all types of volcanic systems, although some are best applied to stratovolcanoes with an apical single vent. In some settings, such as calderas or shield volcanoes, we must broaden coverage to include multiple possible storage regions or vent locations. As an example, Thelen (2014) discretized the long rift zones of shield volcanoes in Hawaiʻi as a set of evenly spaced “vents.” In this construct, each vent comes with recommendations, and several thousand network configurations were simulated to assess the effect on network quality levels and to determine the most efficient network design. The same process could be applied in a caldera setting or a volcanic field, where an evenly spaced grid of potential vents is considered. Localized recommendations for each unique system are beyond the scope of this report and left up to local experts to assess based on the conditions, restrictions, and requirements of each volcano.

Scientific Investigations Report↗
USGS2022

Waters divided: A history of alluvial fan research and a view of its future

Flows exiting confined valleys tend to deposit sediment in fan-shaped landforms. Where deposition is wholly or largely by the tractive forces of flowing water, these landforms are called alluvial fans. They are the product of the progressive division of water and sediment downfan, from slopes that may exceed 0.10 to distal slopes that may be below 0.01. Channel depths also tend to decline, from values that approach one to several meters at steep fanheads, to a few decimeters at distal fan margins. The result is a radiating, depositional ramp where confined or unconfined flows transport sediment from source basins to bounding streams, subsiding basins, or stable platforms. Where streams or subsiding basins consume the sediment supply from the source basin, the fan may approach a steady form whose extent and distal slope are set by stream location or subsidence rate. Where boundary conditions do not remove sediment, the fan may prograde out to long distances and low slopes (<0.01). Theoretical and experimental work over the past several decades support the notion that alluvial fan long-profiles become steeper as sediment supply increases or transport capacity decreases, and increasingly concave upward as the rate of bed material deposition decreases downfan. Grainsize distributions of alluvial fans seem to span the range observed in alluvial rivers, with no processes that uniquely identify them, apart from the distributary pattern of deposition. Bed sand cover tends to increase downfan in arid-region fans, with an absence of systematic downfan fining of coarser grain sizes. Surficial mapping and geochronology have demonstrated that fan deposition varies greatly through time, arguably from climate variations that alter hillslope sediment supply. The combination of surficial mapping and hydraulic modeling with high-resolution topography can now produce detailed flood susceptibility maps. The effective use of these maps to protect lives and property, however, depends on answering many of the enduring questions about the mechanics of how water and sediment divide down alluvial fans.

Book chapter↗
USGS2026

Development of a hydrologic flow model of the Zuñi Salt Lake and surrounding areas, west-central New Mexico

The terminal Zuñi Salt Lake is in a maar in west-​central New Mexico and contains hypersaline water that has long been used by Native Americans for religious purposes and the collection of salt. The U.S. Geological Survey (USGS), in cooperation with the Zuni Tribe of the Zuni Reservation, New Mexico, and Bureau of Reclamation, developed the Zuñi Salt Lake hydrologic flow model to simulate the steady-state conditions of the lake and surrounding groundwater-flow system. The model is a tool that can be used to analyze the potential hydrologic responses to resource development in the region under different water-use scenarios, which can support negotiations that could help protect future use of the lake. The USGS modular hydrologic model, MODFLOW 6, was used to simulate the hydrologic system of the lake and surrounding areas. To define the layering of the model, a three-dimensional hydrogeologic framework was constructed, which included seven informal hydrogeologic units and the locations of faults that truncate and offset the units. Calibration of the model was performed using the iterative ensemble smoother included in a parameter estimation software suite (PEST++). The iterative ensemble smoother approach resulted in a posterior parameter ensemble of model realizations with parameter and simulated values that show similar success in matching observations. Groundwater flux to the Zuñi Salt Lake simulated by using the posterior parameter distribution ranged from 26 to 730 acre-feet per year with a mean, median, and standard deviation of 530, 570, and 170 acre-feet per year, respectively. The relative contribution of groundwater discharge to the lake was simulated using a particle-tracking model for MODFLOW (MODPATH) to be from, in order of decreasing contribution, the Mesaverde, Cenozoic, Mancos, and Dakota hydrogeologic units. Simulations of future conditions using the ensemble of models can provide an empirical estimate of forecast uncertainty without substantial additional analysis.

New Mexico↗
USGS2025

Earthquake magnitude and source parameter estimation with a distributed acoustic sensing dataset in the Gorda subduction zone

Distributed acoustic sensing (DAS) systems offer a cost‐effective way to create large‐scale strainmeter arrays for seismological applications using fiber‐optic cables. DAS‐based strain measurements are known to be influenced by various factors, bringing into question their general reliability for accurate earthquake characterization. A 15‐km‐long DAS deployment in northern California was operational within 3 days of the 2022 M w 6.4 Ferndale earthquake and ran continuously throughout the aftershock sequence. We utilize these aftershock data to validate DAS‐based strain measurements in two ways. We first test the accuracy of DAS‐based magnitude estimates from peak dynamic strains by comparing them with magnitude and attenuation scaling relations derived independently from traditional borehole strainmeter (BSM) data. We demonstrate that DAS‐based magnitudes are comparable to BSM‐based magnitudes when corrections for variations in site response along the fiber‐optic cable are properly made. Magnitude errors are spatially correlated, potentially because of factors such as finite‐fault effects (e.g., stress drop) or more complex, unmodeled path attenuation or because of wave propagation effects in heterogeneous media. We then apply more advanced source characterization methodology to the DAS data using a time‐domain empirical Green’s function (EGF) deconvolution approach to measure details of the moment rate history. The EGF approach using DAS data depends on careful treatment of distorting factors such as anthropogenic sources of noise and optical phase wrapping but successfully isolates source spectra for moderate‐magnitude earthquakes: source spectral ratios obtained from DAS data, broadband seismometer data, and BSM data in the same region show consistent results, revealing differences in directivity and spectral shape among earthquakes. Although further research is needed to refine source‐time‐function estimation techniques for DAS data, particularly for larger magnitude events, these case studies demonstrate the clear potential of DAS for earthquake source characterization.

California↗
USGS2025

Sources of water and salts for the Zuni Salt Lake in west-central New Mexico

The Zuni Salt Lake is located in a maar in west-central New Mexico and contains hypersaline water that has long been used by Native Americans for religious purposes and the collection of salt. There have been several investigations suggesting different sources for the water and salt to the lake. Springs, seeps, and ephemeral streamflow have all been observed to contribute freshwater to the lake, and brackish to hypersaline seeps have been documented along the banks of the lake. This report summarizes the findings of a study that characterizes the lake’s hydrology, its water and salinity sources, and the hydrogeologic conceptual model. Regional groundwater levels indicate that each of the aquifers in the area have the potential to discharge groundwater to the lake. There is also evidence of vertical groundwater flow pathways at the maar that were likely created by the igneous intrusion that fractured the intersecting aquifers. A detailed water budget was constructed from continuous lake stage, precipitation, and evaporation data to estimate the groundwater inflow to the Zuni Salt Lake. It was determined that groundwater inflow to the lake is 441 ±94 acre-feet per year, which composes as much as 77 percent of the total inflows. The high sodium and chloride concentrations measured in two hypersaline samples collected near the lake indicate that the majority of the dissolved solids entering the lake are from a hypersaline groundwater source. The geochemical and isotopic compositions measured in the lake and surrounding features support the interpretation that hypersaline groundwater is the primary source of salts to the lake, which is likely sourced from the older (and deeper) Permian units. The hypersaline groundwater samples collected during this investigation have a unique aqueous chemistry relative to each of the mapped aquifers, and variability in groundwater compositions is interpreted to result from differences in minerology and residence time.

New Mexico↗
USGS2023

Hydrogeology, karst, and groundwater availability of Monroe County, West Virginia

Monroe County is in southeastern West Virginia, encompassing an area of 474 square miles. The area consists of karst and siliciclastic aquifers of Ordovician, Silurian, Devonian, and Mississippian age and is in parts of two physiographic provinces: the Valley and Ridge Province to the east of Peters Mountain, and the Appalachian Plateau Province to the west of Peters Mountain. This study was developed in response to inquiries from the Monroe County Commission requesting assessment of the water resources of the county to better understand the quantity of the county’s groundwater resources, for both current [2023] and future demand, and to provide information to support protection and management of the county’s valuable groundwater resources. Various products were developed for this study that provide knowledge with respect to water availability and contamination susceptibility of the karst aquifers within the county. U.S. Geological Survey (USGS) geologists conducted extensive geologic mapping in support of the project, producing (1) a countywide bedrock geologic map, (2) a countywide hydrogeologic map, and (3) a light detection and ranging (lidar)-derived countywide digital elevation model and associated sinkhole map. A significant part of this work was to map in detail the Greenbrier Group at the formation level, which prior to this study had only partially been completed. The report also includes (4) a description of the lithologic units identified as part of the geologic mapping process. U.S. Geological Survey hydrologists completed several additional products for the hydrology part of the effort, including development of (1) a countywide potentiometric surface (water-table) map, (2) a countywide base-flow stream assessment, (3) countywide water-budget estimates, (4) well log surveys for 15 wells to better understand subsurface controls on groundwater flow within the study area, (5) two groundwater tracer tests to better refine the groundwater divide from the northern and southern parts of the karst aquifer in Monroe County; and finally, based on all available data collected for the study including the potentiometric surface map, geologic map, current [2023] and legacy fluorometric groundwater tracer tests, and base-flow stream assessments, (6) groundwater-basin delineations were reassessed for principal groundwater basins within the Greenbrier aquifer. In Monroe County, four principal hydrogeologic settings produce large yields of water for residential, agricultural, and other uses. The most relied upon water-bearing zone with respect to current [2023] public water supply is from springs along Peters Mountain. These springs are derived from intervals of fractured sandstone and resultant alluvial deposits. Groundwater flows downslope through these permeable alluvial deposits and discharges at the contact with less permeable strata, such as the Reedsville Shale. The second most relied upon water-bearing zone in Monroe County is within the karstic Greenbrier Group aquifer, in which the basal Hillsdale Limestone overlies the less permeable Maccrady Shale. This geologic contact between the Hillsdale Limestone and Maccrady Shale is not only targeted as a source of water for agricultural supply but also is targeted as a source of water for residential supply. The third most relied upon water-bearing zone is composed of shallow perched aquifers within the Greenbrier Group. The discontinuous nature of these perched aquifers makes mapping their extent impossible, but they are related to permeable geologic strata, such as karstified limestones with solutionally enhanced permeability that overlies less permeable shale or chert bedrock. During geologic mapping of the county, several of these perched aquifers were documented in the Pickaway, Union, and Alderson Limestones. A fourth zone consists of springs from Ordovician carbonates at the base of Peters Mountain, which are influenced by sinking streams as well as upwelling along faults. In terms of water quantity, the most sustainable springs are those having deeper-sourced flows. Public supplies are a principal source of water used for residential and commercial supply in the region, accounting for 0.49 million gallons per day (Mgal/d) of fresh-water withdrawals (0.14 Mgal/d of groundwater and 0.35 Mgal/d of surface water) for residential and commercial use and serving 6,645 individuals (49.2 percent of the population). An estimated 6,861 people, (50.8 percent of the population) primarily rely on private wells or other unregulated sources, such as springs, and withdraw 0.55 Mgal/d of groundwater for their residential use. Public water supply in the region is primarily (71.4 percent) derived from springs and augmented by stream withdrawals (backup sources mainly during low-flow periods), with the remaining portion (28.6 percent) derived from groundwater withdrawals from wells. For rural residents, however, 100 percent of their withdrawals are derived from groundwater (wells or springs).

West Virginia↗
USGS2024

Integration of rupture directivity models for the US National Seismic Hazard Model

Several rupture directivity models (DMs) have been developed in recent years to describe the near-source spatial variations in ground motion amplitudes related to propagation of rupture along the fault. We recently organized an effort towards incorporating these directivity effects into the USGS National Seismic Hazard Model (NSHM), by first evaluating the community's work and potential methods to implement directivity adjustments into probabilistic seismic hazard analysis (PSHA). Guided by this evaluation and comparison among the considered DMs, we selected an approach that can be readily implemented into the USGS hazard software, that provides an azimuthally varying adjustment to the median ground motion and its aleatory variability. This method allows assessment of the impact on hazard levels and provides a platform to test the DM amplification predictions using a generalized coordinate system, necessary for consistent calculation of source-to-site distance terms for complex ruptures. We give examples of the directivity-related impact on hazard, progressing from a simple, hypothetical rupture, to more complex fault systems, composed of multiple rupture segments and sources. The directivity adjustments were constrained to strike-slip faulting, where DMs have good agreement. We find that rupture directivity adjustments using a simple median and aleatory adjustment approach can impact hazard both from a site perspective and on a regional scale, increasing shaking off the end of the fault trace up to 30--40\% and potentially reducing it for sites along strike. Statewide hazard maps of California show that the change in shaking along major faults can be a factor to consider for assessing long-period (>ls) near-source effects within the USGS NSHM going forward, reaching up to 10--20\%. Finally, we suggest consideration of minimum parameter ranges and baseline requirements as future DMs are developed to minimize single approach adaptations, to enable more consistent application within both ground motion and hazard studies.

Earthquake Spectra↗
USGS2026

Top Elevation of Glacial Till and Thickness of the Big Sioux Aquifer Delineated From Electrical Resistivity Tomography Surveys Near Sioux Falls, South Dakota, 2022 and 2025

The City of Sioux Falls, South Dakota, requested the U.S. Geological Survey perform electrical resistivity surveys on three parcels of land north of the city. Electrical resistivity data were collected along a total of 22 transects during March 14–18, 2022, and November 17–21, 2025. Results from electrical resistivity surveys were used to delineate the top of glacial till deposits for the purpose of characterizing the Big Sioux aquifer near the city. Delineating geologic contacts provides important information on groundwater storage, flow dynamics, well design and placement, contaminant transport, groundwater–surface-water interactions, and regional water modeling. The top elevation of glacial till and the thickness of the Big Sioux aquifer varied among the three survey areas. The interpreted top elevation of glacial till in the North survey area decreases from east to west toward a slough, with elevations ranging from 1,403 to 1,418 feet (ft). The estimated thickness of the Big Sioux aquifer in the North survey area increased from east to west, with thicknesses ranging from 23 to 38 ft. The top elevation of glacial till in the Well 72 survey area generally decreases from northwest to southeast. Top elevations of the glacial till in the Well 72 survey area ranged from 1,400 to 1,409 ft along the southern end of transect W72_2. The estimated thickness of the Big Sioux aquifer in the Well 72 survey area was greatest along a southeast to northwest trending channel, with thicknesses ranging from 28 to 40 ft. The top elevation of glacial till in the Nose survey area generally decreases west toward the Big Sioux River. Top elevations of the glacial till in the Nose survey area ranged from 1,362 to 1,395 ft. The estimated thickness of the Big Sioux aquifer in the Nose survey area ranged from 33 to 70 ft.

South Dakota↗
USGS2024

Coastal Science Navigator companion guide—Discover the U.S. Geological Survey coastal science products you need

The Coastal Science Navigator is an online gateway to a wide variety of U.S. Geological Survey (USGS) coastal change hazards-related information, data, and tools relevant to stakeholders’ scientific and decision-making needs. The products within the Coastal Science Navigator provide data related to past, present, and future threats to our coastlines. The filter search allows users to see all available products and identify relevant options by time scale, geographic scope, coastal hazard theme, and other filters. The guided search suggests products based on users’ answers to a short series of questions. A comprehensive summary is available for each product. The idea for the Coastal Science Navigator arose in 2020 in response to stakeholder feedback identifying the need for a central source for USGS coastal science information. It was published in July 2023 and initially included 55 products. Regular updates are planned to integrate other existing and new products. This guide introduces some of the many coastal change hazards-related products available through the USGS. In it, we showcase the products included in the Coastal Science Navigator’s initial publication in July 2023. While it is not representative of all the information, tools, and data available, we hope it serves as a compelling snapshot of what the USGS has to offer and encourages you to explore the Coastal Science Navigator to discover more of the products you need. To navigate this guide, the products have been organized by the time scale they are best suited for—past, present, or future—although many products cover multiple time scales. An additional section features software, one of the many product types available as filters within the Coastal Science Navigator. Other products include downloadable data, websites, and geonarratives (web pages that combine text, images, and interactive maps into narratives you can scroll through). Featured geographic scopes are also highlighted within this guide, detailing some of the many regions in which the USGS conducts research and illustrating another way to filter products within the Coastal Science Navigator.

Circular↗
USGS2024

Three-dimensional hydrogeologic framework model of the Russian River watershed, California

The Russian River watershed is in northern Sonoma County and southern Mendocino County, California, in the northern part of the California Coast Ranges. The Russian River serves as a supply for agricultural irrigation and for municipal, domestic, and commercial uses. Through a cooperative agreement with the California State Water Resources Control Board and Sonoma County Water Agency, the U.S. Geological Survey has completed studies to better understand the hydrogeologic system and develop numerical hydrologic modeling tools to evaluate and aid in managing groundwater resources. This report focuses on the development of a digital three-dimensional hydrogeologic framework model of the Russian River watershed for use in groundwater resource assessment and numerical models. The digital three-dimensional hydrogeologic framework model of the Russian River watershed portrays the altitude, thickness, and extent of five hydrogeologic units. These five hydrogeologic units include (1) a basement unit, (2) the Sonoma Volcanics, (3) a consolidated sedimentary rock unit, (4) an unconsolidated sediment unit, and (5) channel alluvium. Model input data were compiled from published geologic maps, interpreted well data, and a model of the top of basement derived from gravity data. These data were used to construct surfaces that represent the upper and lower subsurface boundaries of each hydrogeologic unit. Top surfaces were created for the five hydrogeologic units and then stacked in three dimensions to create a solid-volume digital model. The digital three-dimensional hydrogeologic framework model described in this report and the corresponding data represent the generalized geometry of the subsurface geologic units; the model reproduces the input geologic data with reasonable accuracy and is consistent with previously published subsurface conceptualizations of the region. The model indicates the overall geometry of the basement within the watershed and the spatial extent, altitude, and thickness of the basin-filling units. The hydrogeologic framework model is at a scale and resolution appropriate for use as the foundation for a numerical hydrologic model of the study area.

California↗
USGS2025

Assessment of western Oregon debris-flow hazards in burned and unburned environments

In the steep and mountainous environment of western Oregon, debris flows pose a considerable threat to property, infrastructure and life. Wildfire is commonly known to increase the susceptibility of steep slopes to debris flows, but the extent of this process in the western Cascades is not well understood. The US Geological Survey (USGS) currently estimates postfire debris-flow likelihood and triggering rainfall thresholds using a model calibrated to a southern California inventory of debris flows generated by excess runoff within the first year after fire. Because of a lack of available data, this model has not been tested in western Oregon, or in locations where postfire debris flows initiate via other mechanisms (e.g., shallow landslides or in-channel failures). Using repeat field observations and aerial imagery, we developed two new debris-flow inventories within and adjacent to the perimeters of five 2020 wildfires in western Oregon: Archie Creek, Holiday Farm, Beachie Creek, Lionshead and Riverside. The first inventory focuses on postfire debris flows (2020–2022); the second focuses on debris flows prior to fires (1995–2020). Our inventories of prefire and postfire debris flows were used to document initiation mechanisms in Oregon's western Cascades and to evaluate the effects of wildfire. We found that wildfire changed the distribution of debris-flow initiation mechanisms in the western Cascades. After the wildfires, annual rates of runoff-generated debris flows increased by 22% and the number of shallow landslide-initiated debris flows decreased by 17% relative to before the wildfires. Despite this shift, shallow landsliding was the dominant debris-flow initiation mechanism in both unburned and burned environments. We found the performance of the current USGS debris-flow likelihood model was degraded relative to other previously tested locations across the intermountain western United States. Our results highlight the need for improved postfire hazard assessment in western Oregon based on regional model calibration that is tuned to the dominant debris-flow initiation mechanisms.

Oregon↗
USGS2026

Apatite (U-Th)/He thermochronology from Marsh Creek anticline reconciles Cenozoic and Holocene strain patterns and elucidates the Cenozoic canning displacement zone of Arctic Alaska

The northeastern Brooks Range is a vast fold-thrust belt that records the northernmost expression of Cenozoic deformation in Alaska, likely with complex dynamic linkages to distant tectonic elements. The principal focus of this manuscript is the Marsh Creek anticline (MCA), which is a large and recently active structure within the broader northeastern Brooks Range. The MCA is a complex, polyphase structure mostly buried beneath the Arctic coastal plain. We present apatite (U-Th)/He (AHe) dates from six outcrop samples, all near the structural crest of the anticline, as well as supporting detrital zircon U/Pb (ZUPb) age spectra from five outcrop samples. The AHe sample transect spans ~3 km of structural relief. The four shallowest AHe samples are not reset. However, the two deepest samples exhibit low intrasample variability among replicates and strong date versus grain radius correlations, suggesting post-depositional burial heating to within the AHe partial retention zone. Inverse thermal history modeling of these data resolves a protracted phase of exhumational cooling that began around 33–28 Ma. Detrital ZUPb age spectra from Paleogene strata support an interpretation of diverse inherited thermal histories recorded by the AHe data, and they are also consistent with extant reconstructions of Paleogene sediment dispersal. Placed into regional context, the results constrain a phase of increasing structural relief in the northeastern Brooks Range fold-thrust belt that began by the Eocene. The relief developed in a zone characterized by diminishing structural relief to the west called the Canning displacement zone. Although this zone was active since the Eocene, several structures including the studied part of the MCA were rapidly exhumed in the Oligocene. Lastly, we argue for kinematic compatibility between Cenozoic contraction and active strike-slip in the northeastern Brooks Range, with the temporal change in strain style likely reflecting the increase in structural relief and topography.

Alaska↗
USGS2026

A novel drive-point multilevel system to investigate PFAS and other contaminants of global concern in the hyporheic zone of a wastewater effluent dominated stream

Contaminants found in treated wastewater discharged to streams, including pharmaceuticals and per- and polyfluoroalkyl substances (PFAS), are of global concern due to their deleterious effects on aquatic ecosystems and potential impacts to human health. Hyporheic zones have strong potential for contaminant attenuation. Assessing this potential requires collection of physical and biogeochemical data within the hyporheic zone. This study tested the applicability of a novel drive-point multilevel system (DP-MLS) for quantifying head profiles and characterizing contaminant concentrations in the hyporheic zone of a temperate region effluent dominated stream (EDS). DP-MLS, each with 4 ports, were installed in the stream bed at two sites, DS-1 and DS-2, 0.2 and 4.7 km downstream of the effluent outfall, respectively. Head profiles were measured and groundwater collected for analysis of pharmaceuticals and PFAS temporally over two years. The DP-MLS withstood rapid changes in stage, ice formation, and floating debris. Vertical hydraulic gradients (VHG) were generally upward but varied in magnitude indicating heterogeneity in hydraulic conductivity and variability in flow conditions. Upward VHG were also about 2X larger at DS-1 than at DS-2. Contaminant concentration profiles consistently showed penetration of pharmaceuticals and PFAS to 1 m below the bed at DS-2 while there was less penetration, lower groundwater concentrations, and more temporal variability in concentrations at DS-1. Integration of the physical and chemical data suggests weaker upwelling conditions at DS-2 are more easily reversed during periods of high stream stage, which could facilitate migration of wastewater contaminants into the bed. However, further studies incorporating other transport processes and reach scale dynamics are required to fully characterize these exchanges. Overall, this study demonstrates the efficacy of these novel DP-MLSs for characterization of the hyporheic zone and provides new insights into the occurrence, composition, and persistence of wastewater derived contaminants in the hyporheic zone of a well-studied EDS.

Iowa↗
USGS2026

Determination of baseline water-quality conditions using continuous specific conductance and discrete measurements of total dissolved solids and selected major ions, Arkansas River Basin, Colorado

From 2022 through 2024, the U.S. Geological Survey (USGS) in cooperation with the Regional Resources Planning Group (Southeastern Colorado Water Conservancy District, Colorado Springs Utilities, Pueblo Water, Lower Arkansas Valley Water Conservancy District, Aurora Water, and Upper Arkansas Water Conservancy District) established a basinwide water-quality monitoring network in the Arkansas River Basin in Colorado. The study leveraged ongoing continuous measurements of streamflow and specific conductance (SC) at 13 sites along the main stem Arkansas River and Fountain Creek from the USGS 07108600 Arkansas River at Granite, Colo., (Ark Granite) site to the USGS 07137500 Arkansas River near Coolidge, Kansas, (Ark Coolidge) site. Baseline water-quality conditions were established using data from October 1989 through September 2022 to help identify changes in water quality that could result from changes in land and water use. Total dissolved solids (TDS) concentration was the main indicator of general water quality in this study because it can be accurately estimated from SC and is sensitive to changes in streamflow, water operations, and source contributions. Median TDS concentrations in Arkansas River samples (October 1989 through December 2023) ranged from 75 milligrams per liter (mg/L) at Ark Granite near the headwaters to 3,660 mg/L at Ark Coolidge near the Colorado–Kansas State line. Distinct seasonal differences in median streamflow and TDS were apparent during the winter and summer months. Seasonal Kendall tests showed no significant trends in monthly mean streamflow (October 1995 through September 2022) at Arkansas River sites upstream from Pueblo Reservoir. Upward trends in TDS concentrations and loads occurred only at Ark Granite. Downward trends in streamflow, TDS concentrations, and TDS loads occurred at Arkansas River sites from USGS 07109500 Arkansas River near Avondale, Colo., to Ark Coolidge. Downward trends in streamflow and SC (surrogate for TDS) were more prevalent during winter base flow months and may indicate changes in groundwater quantity, and possibly groundwater quality, potentially affecting the river water-quality condition.

Colorado↗
USGS2025

Revisiting an enigma on California's north coast: The Mw6.5 Fickle Hill earthquake of 21 December 1954

Many earthquakes occur along the North Coast of California in the vicinity of the Mendocino Triple Junction (MTJ), where the Pacific, Gorda, and North American (NA) plates meet, and on the adjacent plate boundaries. The MTJ marks the nexus of the Mendocino and San Andreas faults with the Cascadia subduction zone (CSZ). Historically, most large earthquakes around the MTJ have been within the offshore Gorda plate and its subducted portion beneath the NA plate. North of the MTJ, active faults mapped in the NA plate are part of the CSZ fold‐and‐thrust belt. Although some events have been detected in the NA plate, no large historic events have been associated with mapped surface faults. The 21 December 1954 M w 6.5 earthquake in Humboldt County is one possible exception. Using published data from catalogs and articles, unpublished data from Berkeley’s archives, and S ‐ P times interpreted from two U.S. Coast and Geodetic Survey (USCGS) accelerometers, we determine a probability cloud for the earthquake’s hypocenter using NonLinLoc. The highest probability location lies beneath Fickle Hill just east of the city of Arcata, California, at 40.87° N, 124.03° W, and ∼11 km depth. Using P ‐wave polarities from Berkeley stations and the digitized waveforms from the accelerometers, we find that the focal mechanism most consistent with the data indicates thrust movement with strike, dip, and rake of 350°, 10°, and 90°, respectively, at a depth of 14 km. Given the depth uncertainties of both this event and the megathrust, this implies that the earthquake most likely took place on the subduction interface rather than on the mapped faults in the Mad River fault zone that trend 322° and dip to the northeast. The revisited intensity in the epicentral region also supports a location beneath Fickle Hill to the east of the city of Arcata, California.

California, Idaho, Nevada, Oregon, Washington↗