SEARCH · USGS Science

Results for “Data Series”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

887 records · Page 28Linked to original sources

USGS2026

Altitude of the potentiometric surface and depth to water in the Mississippi River Valley alluvial aquifer, spring 2024

Potentiometric-surface and depth-to-water maps for spring 2024 were created for the Mississippi River Valley alluvial aquifer using groundwater-altitude data from 1,151 wells completed in the Mississippi River Valley alluvial aquifer and from the altitude of the top of the water surface in area rivers from 160 U.S. Geological Survey and U.S. Army Corps of Engineers streamgages. The potentiometric-surface and depth-to-water maps for 2024 were created to support investigations to characterize the Mississippi River Valley alluvial aquifer as part of the U.S. Geological Survey Water Availability and Use Science Program. Sufficient data were available to map the potentiometric surface and depth to water of the Mississippi River Valley alluvial aquifer for spring 2024 for about 83 percent of the aquifer area. The potentiometric contours ranged from 0 to 330 feet (ft) above the North American Vertical Datum of 1988. The regional direction of the groundwater gradient was generally to the south-southwest, except in areas of groundwater-altitude depressions, where the groundwater gradient direction was into the depression, and near rivers, where the groundwater gradient direction was either from the aquifer to the river or from the river into the aquifer. Groundwater depressions in the potentiometric-surface map are in the lower one-half of the Cache region and in most of the Grand Prairie and Delta regions. Depth to water by well in the Mississippi River Valley alluvial aquifer in spring 2024 ranged from 0.27 ft above land surface to 145.65 ft below land surface.

Arkansas, Illinois, Kentucky, Louisiana, Mississip↗

USGS2024

Mapping the resistivity structure of Walker Ridge 313 in the Gulf of Mexico using the marine CSEM method

A marine controlled source electromagnetic (CSEM) campaign was carried out in the Gulf of Mexico to further develop marine electromagnetic techniques in order to aid the detection and mapping of gas hydrate deposits. Marine CSEM methods are used to obtain an electrical resistivity structure of the subsurface which can indicate the type of substance filling the pore space, such as gas hydrates which are more resistive. Results from the Walker Ridge 313 study (WR 313) are presented in this paper and compared with the Gulf of Mexico Gas Hydrate Joint Industry Project II (JIP2) logging while drilling (LWD) results and available seismic data. The hydrate, known to exist within sheeted sand deposits, is mapped as a resistive region in the two dimensional (2D) CSEM inversion models. This is consistent with the JIP2 LWD resistivity results. CSEM inversions that use seismic horizons provide more realistic results compared to the unconstrained inversions by providing sharp boundaries and architectural control on the location of the resistive and conductive regions in the CSEM model. The seismic horizons include: 1) the base of the gas hydrate stability zone (BGHSZ), 2) the top of salt, and 3) the top and bottom of a fine grained marine mud interval with near vertical hydrate filled fractures, to constrain the CSEM inversion model. The top of salt provides improved location for brines, water saturated salt, and resistive salt. Inversions of the CSEM data map the occurrence of a ‘halo’ of conductive brines above salt. The use of the BGHSZ as a constraint on the inversion helps distinguish between free gas and gas hydrate as well as gas hydrate and water saturated sediments.

Louisiana↗

USGS2025

Nodal seismic deployment on Mauna Loa volcano, Hawaii: Dataset and preliminary insights

Mauna Loa is the largest active volcano on Earth, comprising ∼51% of the Island of Hawai‘i’s landmass and posing significant risks to the island’s communities, infrastructure, and natural environment. Historical eruptions have produced lava flows that have reached the ocean in as little as 3 hr. The timing and location of such lava flows in the past 200 yr underscore how critical determination of the location and geometry of magma storage and structure is for volcanic hazard assessment and eruption forecasting. Now, after nearly 38 yr of volcanic quiescence, Mauna Loa has erupted again. On 27 November 2022, fissures initiated within the summit caldera and then migrated to the northeast rift zone, where they generated a large lava flow that threatened a major highway. To improve our understanding of the geometry of this magma system, we deployed a temporary nodal array on Mauna Loa in the summer of 2024. This increased our seismic coverage sufficiently to image this magmatic system. This nodal array consists of 33 seismometers distributed on and around the volcano and was deployed for over three months to record seismic signals. The primary objective of this project is to resolve the high‐resolution seismic velocity structure and characterize seismic features associated with magma storage and ascent pathways. In this article, we present an overview of the deployment, evaluate the quality of the data, and show example recordings to evaluate the suitability of the data set for future seismic investigations, including earthquake relocation, seismic tomography, and receiver function analysis. Comparisons with nearby permanent broadband and short‐period seismic stations demonstrate that the nodal array recorded high‐quality waveforms, making it a valuable resource for constraining the magmatic system beneath Mauna Loa at multiple scales.

Hawaii↗

USGS2025

Ultramafic float rocks at Jezero crater (Mars): Excavation of lower crustal rocks or mantle peridotites by impact cratering?

Based on observation and data from meteorites and in situ scientific missions, experiments as well as models, the Martian mantle is assumed to share some compositional and mineralogical affinity with the terrestrial mantle. However, there might be subtle differences like the Martian mantle being more ferroan. Yet, we do not have any direct analysis of a Martian mantle rock to confirm this assumption. NASA’s Perseverance rover found olivine-rich boulder-sized float rocks on the upper Jezero fan (Mars). These boulders have an ultramafic composition and their mineralogy is dominantly composed of Fo 73±3 olivine with high-Mg orthopyroxene, Cr-rich Ti-Fe oxides and minor plagioclase and high-Ca pyroxene. Microtextural and petrological analysis reveals that these minerals crystallized at equilibrium. In addition, these boulders are different from all the bedrocks analyzed by Perseverance along its traverse which are crustal igneous rocks and sediments. Comparing our data to Martian meteorites and available Mars bulk silicate models (BSM), we discuss that these boulders could represent primitive melts and/or lower crustal material, and we specifically hypothesize that they could be mantle peridotites. We propose that these putative mantle rocks could have been excavated by the succession of impacts from the shallow mantle or lower crust in the Isidis region where Jezero crater is located. These olivine-rich boulders could thereby constitute the first direct analysis of a Martian mantle rock.

Earth and Planetary Science Letters↗

USGS2026

A framework for integrating spatiotemporal deep learning methods with landsat for annual land cover and impervious surface mapping

Land cover information is essential for understanding Earth’s surface dynamics and how vegetation, water, soil, climate, and terrain interact. The National Land Cover Database (NLCD) has been the authoritative source for consistent U.S. land cover mapping. To extend NLCD’s temporal resolution and reduce production latency, we developed the Land Cover Artificial Mapping System (LCAMS)—a prototype spatiotemporal deep learning framework piloted as the foundation for the new Annual NLCD. LCAMS builds on concepts from legacy NLCD and the U.S. Geological Survey Land Change Monitoring, Assessment, and Projection (LCMAP) initiatives. It employs a loosely coupled two-stage architecture consisting of independent but functionally interdependent spatial and temporal models. Spatial models extract per-year information from Landsat data, while the temporal models refine the spatial outputs to enforce inter-annual consistency—critical for reliable land change monitoring. LCAMS produces annual 30 m resolution land cover and impervious surface outputs, with region-specific fine-tuning to generalize across diverse landscapes and temporal dynamics. Validation was conducted using an independent dataset of 1925 randomly sampled plots from five U.S. Landsat Analysis Ready Data (ARD) tiles spanning 1985-2021, selected for spatial and temporal variability. This dataset was used consistently to evaluate LCAMS, Legacy NLCD, and LCMAP. Using the NLCD legend, LCAMS achieved 72.1 ± 1.60% overall agreement, compared to 71.1 ± 1.7% agreement for Legacy NLCD. Using the LCMAP legend, LCAMS achieved 83.4 ± 1.22% agreement, compared to 84.6 ± 1.11% agreement for LCMAP. Overall, LCAMS delivers comparable accuracy while offering higher thematic resolution, longer temporal coverage, and automated production of annual 30 m CONUS land cover.

Remote Sensing of Environment↗

USGS2026

Monazite and xenotime U-Pb geochronology and thermometry of the Blue Ridge and Inner Piedmont of North Carolina: Implications for the thermal-metamorphic evolution of the southern Appalachian metamorphic “core”

The southern Appalachian orogen preserves a complex distribution of metamorphism and deformation varying in timing, magnitude, and spatial extent. These complexities give rise to disparate interpretations for southern Appalachian tectonic evolution, which complicates the testing and interpretation of tectonic models in this system. New monazite (Mnz) and xenotime (Xtm) laser ablation split stream (LASS) analyses alongside Mnz-Xtm thermometry in the orogenic core in the eastern Blue Ridge (EBR), western Inner Piedmont (WIP), and Cat Square terranes (CST) of North Carolina yield new constraints that define distinct pro- and retrograde metamorphic events. The EBR preserves two prograde thermal events: the Taconic (∼470-440 Ma, >660°C) and Neoacadian (∼380-340 Ma, 600–700°C), separated by a period of cooling (exhumation?) and followed by garnet breakdown from 339 to 329 Ma. Evidence of pervasive Neoacadian ductile deformation in the EBR is largely limited to the Brevard fault zone (BFZ), indicating that a major rheological gradient existed across the BFZ during the Neoacadian and early Alleghanian. Southeast of the BFZ, in the WIP and CST, monazite data define a protracted Neoacadian evolution from early mineral growth at ∼405 Ma at ∼450–600°C to >700°C at ∼360 Ma, followed by early Alleghanian retrograde metamorphism and deformation (<345 Ma, 350–500°C). These constraints, together with previously reported thermobarometric data, define a P-T-t evolution for the WIP and CST consistent with Neoacadian crustal flow, while the coeval presence of a thermal-rheological boundary along the BFZ further supports a model of Neoacadian crustal “escape” flow within the orogen.

North Carolina↗

USGS2025

The systematics of stable hydrogen (δ2H) and oxygen (δ18O) isotopes and tritium (3H) in the hydrothermal system of the Yellowstone Plateau volcanic field, USA

To improve our understanding of hydrothermal activity on the Yellowstone Plateau volcanic field, we collected and analyzed a large data set of δ 2 H, δ 18 O, and the 3 H concentrations of circum-neutral and alkaline waters. We find that (a) hot springs are fed by recharge throughout the volcanic plateau, likely focused through fractured, permeable tuff units. Previous work had stressed the need for light δ 2 H water recharge restricted to the northern part of the plateau or recharge during past cold periods. However, new data from the Y-7 drill hole suggests that recharge is not restricted to a certain area or a cold period. (b) δ 18 O values of thermal waters in the geyser basins are shifted from the global meteoric water line by temperature-dependent water-rock reactions with higher subsurface temperatures resulting in a greater shift. (c) Large temporal variations in the isotopic composition of meteoric water recharge and small temporal variability in the isotopic composition of hot spring discharge implies that the volume of groundwater in, and around the Yellowstone caldera is substantially larger than the volume of annual water recharge. (d) Hot springs discharged through different rhyolitic units correlate with identifiable differences in δ 2 H and δ 18 O compositions, 3 H concentrations, and water chemistry that imply equilibration at different temperatures and travel along different flow paths. (e) Based on measured 3 H concentrations, we calculate that hot spring waters in the central part of the geyser basins mostly contain <2% post-1950 meteoric water, whereas waters discharged at the basin margins contain larger fractions of post-1950s meteoric water.

Wyoming↗

USGS1976

Water-quality study of a reach of the Merced River in Yosemite National Park and vicinity, California, April 1973 through September 1974

A 25-mile (40-kilometre) reach of the Merced River was studied to provide the National Park Service with water-quality data prior to the operation of a new sewage-treatment plant. Data were collected periodically at four Merced River and two inflow stations. Discharge varied seasonally with highest flow occurring at the time of spring snowmelt runoff. Lowest flow occurred during late summer, coinciding with high park visitor use and elevated water temperature. Water-quality variables investigated were discharge, temperature, major chemical constituents, selected trace metals, specific conductance, suspended sediment, turbidity, dissolved oxygen, pH, alkalinity, carbon dioxide, total organic carbon, nitrogen, phosphorus, algal growth potential, coliform bacteria, periphyton, and benthic invertebrates. Diel measurements were made at some stations to delineate daily fluctuations in selected water-quality variables. Results indicate that water in the reach of the Merced River studied was of good quality. The river had low concentrations of dissolved solids (8 to 41 milligrams per litre) and low alkalinity values (2 to 24 milligrams per litre of alkalinity as CaCO 3 ). Mean concentrations of nitrogen and phosphorus were highest in the Merced River at Rancheria Flat. Algal growth potential tests showed that phosphorus was limiting algal growth at Happy Isles Bridge, El Capitan Bridge, and South Fork Merced River, whereas nitrogen was limiting growth at Rancheria Flat. Input of excessive nitrogen and phosphorus concentrations in the Merced River during the summer low-flow period, and mixing with warm tributary inflow could cause excessive algal growth and production. The algal types found were diatoms, green algae, and blue-green algae. Biomass/chlorophyll a ratios in the Merced River were low (0.3 to 7.7). Benthic invertebrates consisted chiefly of Diptera, Ephemeroptera, and Plecoptera.

California↗

USGS2024

Representation of surface-water flows using Gradient-Related Discharge in an Everglades Network

The Everglades Depth Estimation Network interpolates water-level gage data to produce daily water-level elevations for the Everglades in south Florida. These elevations were used to estimate flow vectors (gradients and directions) and volumetric flow rates using the Gradient-Related Discharge in an Everglades Network (GARDEN) application developed by the U.S. Geological Survey in cooperation with the U.S. Army Corps of Engineers. Flow rates in both the east-west and north-south directions were computed on a 400-meter square grid using modified parameters in the Manning’s equation. The frictional resistance parameter in the Manning’s equation was calibrated to measured flow rates at coastal creeks fed by Everglades Depth Estimation Network boundary flows. Levees and other features that act as barriers to flow were defined as “no-flow” grid cells where vectors were set to zero. The flow volume magnitudes were calibrated with 2020 daily values of coastal river flows, and verification was performed using 2021 data. Within a given day, the measured coastal river flows fluctuate more than the GARDEN boundary flows because of tidal and wind forcings. Because the GARDEN boundary flows were the upstream water source for the coastal rivers, calibration focused on matching average daily flow volumes rather than daily fluctuations. The Pearson’s correlation coefficient is 0.766 for the 2020 calibration period and 0.566 for the 2021 verification period. Applying GARDEN to periods with hydraulic-control-structure releases allows the propagation of structure flows to be seen in the daily flow-vector maps along with the multiday response of flows farther downgradient. Flow vectors may be overestimated near control structures because of difficulties in resolving the water gradient downstream from the structure. Flow vectors farther from the structure are more accurate than those near the structure.

Florida↗

USGS2026

Ground-motion aleatory-variability models for Puerto Rico and the U.S. Virgin Islands

I develop independent logic trees for aleatory variability for crustal and subduction-zone (interface and intraslab) earthquakes for seismic hazards analyses in Puerto Rico and the U.S. Virgin Islands (PRVI) from existing suites of ground-motion models (GMMs) and from ground-motion datasets, including a regional PRVI dataset. The aleatory variability models are parameterized using a partially nonergodic partitioning of standard deviation that consists of independently developed between-event ( ), site-to-site ( ), and event-corrected single-station ( ) standard deviation components. The effects of nonlinear site response on aleatory variability are incorporated through additional terms that modify the standard deviation components. Because one goal of this work is to develop independent logic trees for aleatory variability that synthesize the aleatory variability models from GMMs, I make use of the functional forms of the input GMMs. The PRVI dataset contains a limited number of stations with high-quality site metadata and does not contain records from earthquakes with magnitudes greater than 6.1, so I choose not to develop the aleatory variability models from the regional dataset alone. Instead, the standard deviation components from regional ground-motion data are evaluated against the components derived from GMMs and from available global datasets, and regionalized standard deviation components are incorporated where there is evidence that regional effects exhibit substantial differences. The resulting logic trees for aleatory variability consist of models of and that are consistent with semiempirical GMMs for active crustal and subduction-zone regimes, and two alternative models of , including one model that exhibits site-to-site variability informed by PRVI data, with values that exceed global models. The aleatory variability models may be considered in future hazards assessments in PRVI to simplify the hazard calculations, to incorporate regional ground-motion variability effects, and to enable direct logic-tree weighs of aleatory variability.

Puerto Rico, U.S. Virgin Islands↗

USGS2000

Natural attenuation of chlorinated volatile organic compounds in ground water at Area 6, Naval Air Station Whidbey Island, Washington

Natural attenuation is a viable alternative to pump and treat for meeting remediation objectives in the vicinity of the southern contaminant plume. The combination of historically low contaminant concentrations in ground water, a landfill cap that limits source area contributions, favorable conditions for degradation of VC, and a relatively long downgradient distance to potential receptors are all favorable for natural attenuation as a remediation alternative. Natural attenuation could effectively meet all but one remediation goal that extraction wells PW- 2, PW-4, PW-6, PW-7, PW-8 and PW-9 are currently being employed to meet. The goal of preventing migration of all VC across the site boundary could not be met by natural attenuation. Some VC would migrate south of the Navy boundary, but the potential for subsequent VC mineralization downgradient of the base and the existing institutional controls would result in minimal additional risk from using natural attenuation. In the western contaminant plume natural attenuation is not currently a viable alternative to pump and treat for meeting remediation objectives. There is a possibility that rates for reductive dechlorination of TCE and TCA could increase substantially if the plume was allowed to migrate beneath the Oak Harbor landfill, but there are not enough data to be certain of such an increase. TCA and TCE concentrations at the leading edge of the western plume need to be reduced to at least 25 and 40 µg/L, respectively, to be protective of potential downgradient receptors. Source area TCA and TCE concentrations have decreased substantially over the past ten years, and the extraction wells PW-3 and PW-5 in particular are removing a significant mass of contaminants from ground water, so natural attenuation may be a viable alternative for the western plume in the future. There would be some possible side benefits of using natural attenuation as an alternative to pump and treat in the southern contaminant plume. The first would be that the resulting decrease in the amount of treated water that would need to be recharged in the swale north of the landfill would result in less off-base migration of contamination across the western site boundary. The second benefit would be a substantial reduction in the amount of dissolved iron and manganese being extracted from the shallow aquifer and run through the treatment system. Removing that source of operation and maintenance problems would result in more effective containment and removal of contamination in the western contaminant plume. The most critical data gap identified in this evaluation is the paucity of contaminant chemistry information downgradient of the Navy boundary in the vicinity of the southern contaminant plume. Without such data, the behavior of the plume and the protectiveness of natural attenuation to downgradient receptors cannot be verified, and field attenuation rates for VC cannot be determined directly. The existing long-term monitoring plan would need to be reviewed and revised if natural attenuation is selected as a remedy for the contamination in the southern plume. In particular, additional performance monitoring wells may be required downgradient of the property.

Washington↗

USGS2025

Using gridded seismicity to forecast the long-term spatial distribution of earthquakes for the 2025 Puerto Rico and U.S. Virgin Islands National Seismic Hazard Model

Gridded (or background) seismicity models are a critical component of probabilistic seismic hazard assessments, accounting for off‐fault and smaller‐magnitude earthquakes. They are typically developed by declustering and spatially smoothing an earthquake catalog to estimate a long‐term seismicity rate that can be used to forecast future earthquakes. Here, we present new gridded seismicity models for use in the 2025 National Seismic Hazard Model (NSHM) for Puerto Rico and the U.S. Virgin Islands (PRVI). The previous PRVI NSHM was released in 2003, and our new models incorporate updates to both data and methodology. We utilize an updated earthquake catalog based on improved Puerto Rico Seismic Network data with newly characterized completeness epochs. The catalog is divided into crustal, subduction interface, and intraslab seismicity using new methods and Slab2 subduction zone geometries. To forecast the long‐term spatial distribution of earthquakes, we use an updated methodology developed for the 2023 U.S. 50‐state NSHM, considering three declustering methods and two spatial smoothing methods based on 2D Gaussian kernels. To adapt it for the complex seismotectonics of the region, we also adopt probabilistic methods to account for events with unknown depths and uncertainties in tectonic classification, and develop a new method for spatial scaling to counteract the effects of spatial variability in network coverage while maintaining the use of smaller events. Finally, we test the performance of these spatial models in forecasting the location of M w ≥ 5earthquakes in the region. Our updated methodology improves the representation of epistemic uncertainty relative to the 2003 model, and our results demonstrate the effectiveness of the new measures we have introduced to address heterogeneities in network detection and systematically evaluate forecast performance.

Puerto Rico, U.S. Virgin Islands↗

USGS2024

Groundwater flow model for the Des Moines River alluvial aquifer near Des Moines, Iowa

Des Moines Water Works (DMWW) is a regional municipal water utility that provides residential and commercial water resources to about 600,000 customers in Des Moines, Iowa, and surrounding municipalities in central Iowa. DMWW has identified a need for increased water supply and is exploring the potential for expanding groundwater production capabilities in the Des Moines River alluvial aquifer, where it operates two radial collector wells (RCWs). The U.S. Geological Survey, in cooperation with DMWW, completed a study of the Des Moines River alluvial aquifer and interactions of the RCWs with the aquifer; no previously published model has included the existing well locations, which is the focus of this model. A conceptual and numerical groundwater flow model have been developed to characterize the Des Moines River alluvial aquifer under existing conditions, to simulate water levels observed in the RCWs, and to provide publicly accessible hydrologic data and research that advance understanding of the regional hydrologic system and can potentially be used in the future to evaluate groundwater production scenarios. Model performance was assessed by comparing observed and simulated groundwater levels that included water level elevations, water level changes, water level inequality observations, surface water streamflow, and change in surface water volume from upstream to downstream. Water table elevation in the aquifer layers is on average slightly overestimated with average absolute value error less than 1.5 meters at both RCWs and less than 2.5 meters for all observation wells in the alluvial aquifer layers. The model also accurately simulated water tables greater than the RCW design minimum (a water level threshold at which RCW pumping is reduced) in all timesteps for which water level observation data existed. Water table elevation error was higher in other model layers that were not the focus of the study, and the model did not accurately match streamflow targets.

Iowa↗

USGS2024

Hydrologic investigations and a preliminary conceptual model of the groundwater system at North Penn Area 1 Superfund Site, Souderton, Montgomery County, Pennsylvania

The U.S. Geological Survey (USGS) conducted hydrogeologic investigations, reviewed existing data, and developed a preliminary conceptual model of the groundwater system as part of technical support of the U.S. Environmental Protection Agency (EPA) at the North Penn Area 1 Superfund Site (hereafter, the NP1 Site) located within the Borough of Souderton in Montgomery County, Pennsylvania. Field work and monitoring took place during 2012–18. The area is underlain by sedimentary formations that form a fractured-rock aquifer used for drinking water and industrial supply. The EPA placed the Site on the National Priorities List in 1989, identifying tetrachloroethylene (PCE) and trichloroethylene (TCE) as contaminants of concern. During 2012–18, the USGS conducted field activities that included drilling an 82-foot (ft)-deep monitoring well (MG 2220) in 2016, reconstructing a 208-ft-deep former industrial production well (MG 668 [Granite Knitting Mill]), and collecting borehole geophysical and video logs and water levels from those and five additional wells, which ranged in depth from about 50 to 200 ft below land surface. Continuous water levels were collected during 2014–17, and a synoptic set of water levels were measured in April 2018 in the seven wells. The borehole geophysical logs (caliper, acoustic televiewer, natural gamma, single-point resistance, vertical flow, and fluid temperature and resistivity) and borehole video logs in the seven wells were evaluated to assess potential for lithologic correlation and to identify and describe water-bearing features, which included both low- and high-angle fractures and other openings oriented along dipping bedding planes, joints, or possible faults. Borehole geophysical logs collected by USGS in 1992 in a 300-ft-deep former production well near the Site were also evaluated. Few to no distinctive features were identified on geophysical logs (natural gamma and single-point resistance) that could be used for correlation, thus limiting this approach to determining local geologic structure. Extensive fracturing in the upper 62 ft of monitoring well MG 2220 indicates that the well was likely drilled through a zone of faulting, and other evidence of faulting is present in the area near the Site. Assessment of continuous water levels showed hydraulic connections among some wells as indicated by rising or falling water levels in response to changes in pumping rates at nearby wells. A map of water levels measured in April 2018 indicates potential for groundwater flow generally toward the stream to the south and southwest of the Site, but the limited water-level data are insufficient to describe vertical groundwater gradients or lateral gradients in any detail. Review of 1999–2022 volatile organic compound (VOC) monitoring data collected by the Pennsylvania Department of Environmental Protection for five monitoring wells indicates that the highest groundwater concentrations of PCE and TCE were found in samples from extraction well MG 2201 (S-1) downgradient from, and nearest to, the previously identified Site contaminant source area, and these concentrations fluctuated through time. PCE concentrations were higher than TCE concentrations in samples from all five monitoring wells and were much higher than TCE concentrations in samples from extraction well MG 2201 (S-1). Temporally variable recharge is a possible factor affecting observed fluctuations in PCE concentrations in groundwater samples from well extraction MG 2201 (S-1), as indicated by a general inverse relation between PCE concentrations and water levels in a nearby long-term observation well. The PCE concentration of 1,830 micrograms per liter (μg/L) in a May 2018 water sample from monitoring well MG 2220 was more than four times the PCE concentration of 444 μg/L in a December 2017 sample from the nearby extraction well MG 2201 (S-1), which is open to fewer fractures. Low concentrations of VOCs were measured in surface water at two stream sites downgradient from wells with the highest groundwater VOC concentrations at the Site, indicating that discharge of contaminated groundwater to the stream is likely. Development of a conceptual model of the groundwater system was constrained by limited data. In areas with no pumping, groundwater-flow directions generally are thought to be controlled by topography and geologic structure (bedding orientation) and likely to the south and southwest of the Site, with local flow directions affected by orientations of fractures, joints, and local faults. Additional investigations that could help improve the conceptual model of the groundwater system and help delineate the extent of groundwater contamination and its transport are discussed.

Pennsylvania↗

USGS2024

Are the horizontal-to-vertical spectral ratios of earthquakes and microtremors the same?

We consider the similarities and differences between earthquake and microtremor horizontal‐to‐vertical spectral ratios (eHVSR and mHVSR, respectively) using a dataset of 161 sites in southern California. Quantitative comparisons are made in terms of the eHVSR and mHVSR lognormal median curves, as well as the frequencies and amplitudes associated with the fundamental‐ and higher‐mode resonances where present. The results show only 58% of the eHVSR–mHVSR pairs agree in terms of their median curve and only 25% of the eHVSR–mHVSR pairs agree in terms of shared resonances, which increases to 68% if flat HVSRs are considered equivalent. Furthermore, while the shared resonances match very well in terms of frequency (root mean square error, RMSE, <0.11 Hz), the amplitudes of those resonances do not agree (RMSE >1.6). These findings demonstrate that while eHVSR and mHVSR agree at some sites, they are not equivalent at all sites. To investigate if the agreement between eHVSR and mHVSR could be related to features of the microtremor data, earthquake recordings, and/or the site conditions, three machine learning (ML) models at varying levels of interpretability are presented. The ML models—which include multivariate logistic regression, gradient‐boosted trees, and support vector machines—show only partial success at using site‐specific data to predict whether eHVSR and mHVSR will likely agree in terms of their median curve (accuracy of 78%) and number of resonances (accuracy of 84%). Therefore, we conclude that while eHVSR and mHVSR can be quite similar in terms of resonant frequencies at some sites, they are not identical at all sites. Furthermore, preliminary evidence shows that the agreement of eHVSR and mHVSR can be predicted a priori given features of the microtremor measurements, earthquake recordings, and site conditions, although a larger dataset will be necessary for developing a robust predictive model.

California↗

USGS1998

Technique for simulating peak-flow hydrographs in Maryland

The efficient design and management of many bridges, culverts, embankments, and flood-protection structures may require the estimation of time-of-inundation and (or) storage of floodwater relating to such structures. These estimates can be made on the basis of information derived from the peak-flow hydrograph. Average peak-flow hydrographs corresponding to a peak discharge of specific recurrence interval can be simulated for drainage basins having drainage areas less than 500 square miles in Maryland, using a direct technique of known accuracy. The technique uses dimensionless hydrographs in conjunction with estimates of basin lagtime and instantaneous peak flow. Ordinary least-squares regression analysis was used to develop an equation for estimating basin lagtime in Maryland. Drainage area, main channel slope, forest cover, and impervious area were determined to be the significant explanatory variables necessary to estimate average basin lagtime at the 95-percent confidence interval. Qualitative variables included in the equation adequately correct for geographic bias across the State. The average standard error of prediction associated with the equation is approximated as plus or minus (+/-) 37.6 percent. Volume correction factors may be applied to the basin lagtime on the basis of a comparison between actual and estimated hydrograph volumes prior to hydrograph simulation. Three dimensionless hydrographs were developed and tested using data collected during 278 significant rainfall-runoff events at 81 stream-gaging stations distributed throughout Maryland and Delaware. The data represent a range of drainage area sizes and basin conditions. The technique was verified by applying it to the simulation of 20 peak-flow events and comparing actual and simulated hydrograph widths at 50 and 75 percent of the observed peak-flow levels. The events chosen are considered extreme in that the average recurrence interval of the selected peak flows is 130 years. The average standard errors of prediction were +/- 61 and +/- 56 percent at the 50 and 75 percent of peak-flow hydrograph widths, respectively.

Maryland↗

USGS2026

Effects of human activity on Khumbu Glacier: Towards a sustainable Everest Base Camp

The Everest Base Camp (EBC), a critical staging area for mountaineers attempting to summit Mount Everest, has seen a significant increase in human activity over the past few decades. The increasing number of climbers, trekkers, and support staff, particularly at the campsite area, has intensified environmental impacts on the Khumbu Glacier. This study investigates the effects of human activity at EBC, focusing on three contributors to glacier melt: global climate change, local fossil fuel consumption, and human urinary discharge. Through field data collected during the spring 2023 climbing season, this study examines the energy released through the use of liquefied petroleum gas (LPG), kerosene, and petrol for cooking, heating, and electricity, as well as the heat generated by human urinary discharge. The total heat energy released from these activities at EBC in the spring of 2023 was 849,174 ± 179,774 MJ, which would be sufficient to melt 2492 ± 528 tons of glacier ice and snow. Trends in land surface temperature at EBC and adjacent environments during the 1991–2023 period were calculated from Landsat 5, 7, and 9 satellite data. The 32-year Landsat record reveals that EBC surface temperature increased by 0.28 °C year −1 , which was roughly twice the rate of warming at the surface of Khumbu Glacier adjacent to EBC and about 15% higher than the temperature increase of the debris-covered terrain immediately to the north of EBC. The findings suggest that addressing these anthropogenic influences could help to preserve the Khumbu Glacier and support the sustainability of mountaineering in the region. This paper also takes a transformative approach and explores stable and safer locations in case there is a necessity to relocate the current EBC. Two sites have been identified southwest of the existing EBC, which, unlike the current supraglacial site, are situated on stable ground.

Everest Base Camp, Khumbu Glacier↗

USGS2026

Recent scientific contributions by the U.S. Geological Survey in the San Francisco Bay and Sacramento–San Joaquin Delta Estuary

Introduction The San Francisco Bay and Sacramento–San Joaquin Delta Estuary (hereafter, Bay-Delta) is the largest estuary on the West Coast of the United States. The Bay-Delta covers more than 1,600 square miles and drains a watershed of more than 75,000 square miles, which is greater than 40 percent of California. The region surrounding the Bay-Delta is home to about 10 million people, and its habitats (fig. 1) support more than 800 plant and animal species. The waterways of the Bay-Delta are the central hub of California’s extensive freshwater delivery system, supplying water to more than 27 million Californians and 4 million acres of farmland in the Central Valley. The U.S. Geological Survey (USGS) is the primary science agency of the U.S. Department of the Interior, providing a broad range of Earth, water, biological, and mapping data and expertise to inform natural resource management across the country. This fact sheet focuses on research conducted by the USGS in the Bay-Delta region, mostly within the past 5 years. The fact sheet is organized across five major themes: water flow and water quality, fish and wildlife, wetland restoration, invasive species, and hazards. In each of these areas, the USGS works closely with Federal, State, and local agencies; academia; and non-governmental organizations to provide objective, evidence-based science. The data and knowledge gained from USGS research and monitoring are publicly available and are routinely used by agencies, including the U.S. Bureau of Reclamation, U.S. Army Corps of Engineers, U.S. Fish and Wildlife Service, California Department of Water Resources, California Department of Fish and Wildlife, California State Water Resources Control Board, Delta Stewardship Council, and many additional organizations and stakeholders to inform management of the Bay-Delta region and its resources.

California↗