SEARCH · USGS Science

Results for “Contributions to Mineralogy and Petrology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,674 records · Page 28Linked to original sources

USGS1986

Regionalization of low-flow characteristics of Tennessee streams

Procedures for estimating 3-day 2-year, 3-day 10-year, 3-day 20-year, and 7-day 10-year low flows at ungaged stream sites in Tennessee are based on surface geology and drainage area size. One set of equations applies to west Tennessee streams, and another set applies to central and east Tennessee streams. The equations do not apply to streams where flow is significantly altered by activities of man. Standard errors of estimate of equations for west Tennessee are 24 to 32% and for central and east Tennessee 31 to 35%. Streamflow recession indexes, in days/log cycle, are used to account for effects of geology of the drainage basin on low flow of streams. The indexes in Tennessee range from 32 days/log cycle for clay and shale to 350 days/log cycle for gravel and sand, indicating different aquifer characteristics of the geologic units that sustain streamflows during periods of no surface runoff. Streamflow recession rate depends primarily on transmissivity and storage characteristics of the aquifers, and the average distance from stream channels to basin divides. Geology and drainage basin size are the most significant variables affecting low flow in Tennessee streams according to regression analyses. (Author 's abstract)

Tennessee↗

USGS1989

Techniques for simulating flood hydrographs and estimating flood volumes for ungaged basins in east and west Tennessee

A dimensionless hydrograph developed for a variety of basin conditions in Georgia was tested for its applicability to streams in East and West Tennessee by comparing it to a similar dimensionless hydrograph developed for streams in East and West Tennessee. Hydrographs of observed discharge at 83 streams in East Tennessee and 38 in West Tennessee were used in the study. Statistical analyses were performed by comparing simulated (or computed) hydrographs, derived by application of the Georgia dimensionless hydrograph, and dimensionless hydrographs developed from Tennessee data, with the observed hydrographs at 50 and 75% of their peak-flow widths. Results of the tests indicate that the Georgia dimensionless hydrography is virtually the same as the one developed for streams in East Tennessee, but that it is different from the dimensionless hydrograph developed for streams in West Tennessee. Because of the extensive testing of the Georgia dimensionless hydrograph, it was determined to be applicable for East Tennessee, whereas the dimensionless hydrograph developed from data on streams in West Tennessee was determined to be applicable in West Tennessee. As part of the dimensionless hydrograph development, an average lagtime in hours for each study basin, and the volume in inches of flood runoff for each flood event were computed. By use of multiple-regression analysis, equations were developed that relate basin lagtime to drainage area size, basin length, and percent impervious area. Similarly, flood volumes were related to drainage area size, peak discharge, and basin lagtime. These equations, along with the appropriate dimensionless hydrograph, can be used to estimate a typical (average) flood hydrograph and volume for recurrence-intervals up to 100 years at any ungaged site draining less than 50 sq mi in East and West Tennessee.

Tennessee↗

USGS2024

Following the tug of the audience from complex to simplified hazards maps at Cascade Range volcanoes

Volcano-hazard maps are broadly recognized as important tools for forecasting and managing volcanic crises and for disseminating spatial information to authorities and people at risk. As scientists, we might presume that hazards maps can be developed at the time and with the methods of our discretion, yet the co-production of maps with stakeholder groups, who have programmatic needs of their own, can sway the timing, usability, and acceptance of map products. We examine two volcano hazard map-making efforts by staff at the U.S. Geological Survey. During the 1990s and early 2000s scientists developed a series of hazard assessments and maps with detailed zonations for volcanoes in Washington and Oregon. In 2009, the National Park Service expressed the need for simplified versions of the existing hazard maps for a high-profile visitor center exhibit. This request created an opportunity for scientists to rethink the objectives, scope, content, and map representations of hazards. The primary focus of this article is a discussion of processes used by scientists to distill the most critical information within the official parent maps into a series of simplified maps using criteria specified. We contextualize this project with information about development of the parent maps, public response to the simplified hazard maps, the value of user engagement in mapmaking, and with reference to the abundance of guidance available to the next generation of hazard-mapmakers. We argue that simplified versions of maps should be developed in tandem with any hazard maps that contain technical complexities, not as a replacement, but as a mechanism to broaden awareness of hazards. We found that when scientists endeavor to design vivid and easy-to-understand maps, people in many professions find uses for them within their organization’s information products, resulting in extensive distribution.

Washington↗

USGS2025

Detection of viral, bacterial, and protozoan pathogens and microbial source tracking markers in paired large- and small-volume water samples

When sampling for waterborne microbes, researchers may need to diverge from recommended sample volumes due to logistical constraints, novel targets, or challenging matrices, with little guidance about the potential impact on results. In field studies, we measured bacteria, viruses, and protozoa (15 quantitative polymerase chain reaction assays) in paired large- and small-volume samples to evaluate method performance and relevant factors. Concordance between methods was low. Large-volume ultrafiltration yielded more detections than small-volume sampling, especially for pathogens in groundwater. Greater microbial concentrations were associated with more frequent detections in small-volume samples and greater concordance between paired samples. Large-volume samples appeared to be more susceptible to diminished sensitivity from complex sample matrices. In laboratory studies, recovery of microbes was poorer for large- than small-volume methods, although large-volume methods more reliably detected low-concentration targets. Large-volume samples were less stable than small-volume samples during storage. Overall, large-volume sampling was superior for detecting pathogens but may underestimate concentrations; small-volume sampling was more prone to false negatives but was adequate when concentrations were relatively high, like we observed for microbial source tracking in surface waters.

Wisconsin↗

USGS2026

Preface to the focus section on intraplate earthquakes

More than a half century after plate tectonics provided an overarching framework to explain earthquakes along active plate boundaries, numerous theories have been proposed to explain where, why, and how often earthquakes occur well away from active plate boundaries, but a paradigm remains elusive. Even the classification of earthquakes away from active plate boundaries as "intraplate" raises issues, with potentially important distinctions between Stable Continental Regions and more actively deforming regions including passive margins and failed rifts. Some of the largest known intraplate earthquakes themselves remain enigmatic, having occurred before the modern instrumental era. Hazard assessments are often data-limited: low fault-slip rates relative to landscape modification rates result in poor discoverability of fault sources, challenging the characterization of source zones and earthquake recurrence; the completeness and homogenization of instrumental earthquake catalogs using uncertain magnitude conversions can lead to uncertainties in earthquake recurrence; and, limited strong-motion observations for large-magnitude events at near-source distances leads to uncertainties in the selection and development of ground-motion models for seismic hazard studies. Data from recent intraplate earthquakes around the world—from the moment magnitude M 7.7 2001 Bhuj, India, earthquake 25 years ago to the 2024 M 4.8 Tewksbury, New Jersey earthquake—have yielded both new insights and new questions. The papers in this special focus discuss many of the long-standing challenges involved with intraplate earthquake investigations and provide a snapshot of the state of the art with current research to advance our understanding.

Seismological Research Letters↗

USGS2025

The U.S. Geological Survey, the U.S. Department of Defense, and the U.S. Intelligence Community—100 years of mapping and remote sensing collaboration, 1879–1979

Introduction The U.S. Geological Survey (USGS)—a Federal civilian agency—and U.S. military and intelligence agencies collaborate on mapping and remote sensing and have since the establishment of the USGS. The organizations exchange data and information and share technology to further their respective missions in service to the American people. Often referred to as examples of “good government” or “whole of government,” the collaboration avoids costly duplication and maximizes time and effort for the government sectors. Collaboration between these sectors started with the original mapping of the United States and evolved to include remote sensing after the advent of aerial photography and satellite imagery.

Circular↗

USGS2025

Comparison of hydrologic data and water budgets between 2003–08 and 2018–23 for the eastern part of the Arbuckle-Simpson aquifer, south-central Oklahoma

The Arbuckle-Simpson aquifer is divided spatially into three parts (eastern, central, and western). The largest groundwater withdrawals are from the eastern part of the Arbuckle-Simpson aquifer, which provides water to approximately 39,000 people in Ada and Sulphur, Oklahoma, and surrounding areas. The Arbuckle-Simpson aquifer, including the eastern part, is designated a sole source aquifer for its service area. Based primarily on data collected between 2003 and 2008, a series of comprehensive hydrologic studies of the Arbuckle-Simpson aquifer was published to provide the information necessary to perform groundwater-flow model simulations so that the Oklahoma Water Resources Board could determine how much water could be withdrawn from the aquifer while maintaining flow to springs and streams. As part of the Phase 1 studies, an aquifer water budget was developed from a numerical model for the period 2003–08. For this report, Phase 1 refers to the 2003–08 data collection period, although for some of the analyses, data collected prior to 2003 were used to inform model development work. Allocation of water from this aquifer was then established by the Oklahoma Water Resources Board in 2013. Additional well-spacing rules were also established by the Oklahoma Water Resources Board for sensitive sole source groundwater basins. To determine how the water budget for the eastern part of the Arbuckle-Simpson aquifer has changed over time, recently collected hydrologic data (2018–23) were compared to data collected during 2003–08. The analysis of changes in the aquifer water budget from 2003–08 to 2018–23 could help resource managers better understand changes in the overall balance of water in storage and the potential effects on streamflow, changes in groundwater levels, and the effects of different water uses in the aquifer area on available water in the eastern part of the Arbuckle-Simpson aquifer and streams overlying the eastern part of the Arbuckle-Simpson aquifer.

Oklahoma↗

USGS2025

Determination of per- and polyfluoroalkyl substances in water by direct injection of matrix-modified centrifuge supernatant and liquid chromatography/tandem mass spectrometry with isotope dilution

A direct-injection liquid chromatography/tandem mass spectrometry method was developed to determine 34 per- and polyfluoroalkyl substances (PFAS), including selected branched isomers, in centrifuge supernatant of matrix-modified (amended with approximately 50 percent methanol) water samples. The method has been validated in reagent water, surface water, groundwater, and wastewater effluent. Other water types (for example, drinking water, untreated wastewater, and landfill leachate) have been analyzed by the method but not systematically validated. Recovery of isotope-dilution standards, added to each sample, may be used to assess method performance in nonvalidated matrices on a sample-by-sample basis. Using this method, PFAS concentrations were determined in the range of 2–2,000 nanograms per liter in water samples. This range can be extended by diluting concentrated samples. At circumneutral pH, most compounds are present in the environment in their ionized form, and data are reported as such (for example, perfluorooctanoic acid is referred to as “perfluorooctanoate” [PFOA], perfluorooctane sulfonic acid is referred to as “perfluorooctane sulfonate” [PFOS]). Sample preparation procedures were designed without the use of filtration and with minimum sample handling steps to mitigate procedural losses of target compounds due to sorption to surfaces. Further, isotope-dilution quantification allowed for the correction of bias that may result from procedural losses, matrix-induced signal suppression or enhancement, and other factors. Validation experiments to characterize bias and variability, method detection level, and holding time were done in four distinct water matrices—reagent water, surface water, treated wastewater effluent, and groundwater—at multiple concentration levels. Mean PFAS recoveries met data quality objectives of bias and variability studies in all four validation matrices except for two compounds with low and variable recovery in the reagent water matrix only. Isotope-dilution standards, treated as surrogate compounds, were analyzed in more than 1,500 customer-submitted environmental samples with aggregate recovery of 102.5±6.5 percent (mean±standard deviation). Maximum holding times for all target compounds in the four validation matrices were 28 days for refrigerated samples and 90 days for frozen samples.

Techniques and Methods↗

USGS2025

Central Valley Hydrologic Model version 2 (CVHM2): Decision support tool for groundwater and land subsidence management

The San Joaquin Valley (SJV) of California is one of the world’s most productive agricultural regions. Reliance on groundwater has led to some of the greatest rates of human-induced land subsidence in the world in the 20th century, as well as more recently. The United States Geological Survey (USGS) has recently developed an integrated surface–subsurface hydrologic model, the Central Valley Hydrologic Model 2 (CVHM2), that represents the major components of the hydrologic system of California’s Central Valley. In this study, CVHM2 was applied as a decision support tool while simulating various management strategies to mitigate the land subsidence caused by the extraction of groundwater. CVHM2 was extended through to 2073 and applied to simulate management scenarios in terms of three primary drivers and their impact on subsidence along the Delta–Mendota Canal (DMC), a critical piece of infrastructure in the western SJV. The drivers considered were agricultural water demands, managed aquifer recharge (MAR), and changes in future climate. The results show that future subsidence is most sensitive to water demands, second most sensitive to future changes in climate, and relatively insensitive to MAR when it is applied as a surface application in the western SJV. However, we demonstrate via proof-of-concept scenarios that the MAR is capable of arresting subsidence when implemented via injection below the Corcoran Clay Member of the Tulare Formation instead of as a surface application. We also examine the uncertainty that is the result of climate variability and how to use the tool to identify the most appropriate strategies to constrain future subsidence to acceptable levels.

California↗

USGS2024

Bathymetric and velocimetric surveys at highway bridges crossing the Missouri and Mississippi Rivers on the periphery of Missouri, June 13–22, 2022

Bathymetric and velocimetric data were collected by the U.S. Geological Survey, in cooperation with the Missouri Department of Transportation, near seven bridges at six highway crossings of the Missouri and Mississippi Rivers on the periphery of Missouri from June 13–22, 2022. A multibeam echosounder mapping system was used to obtain channel-bed elevations for river reaches about 1,640 feet longitudinally and generally extending laterally across the active channel from bank to bank during minor flood-flow conditions. These surveys provided channel geometry and hydraulic conditions at the time of the surveys and provided characteristics of scour holes that may be useful in developing or verifying predictive guidelines or equations for computing potential scour depth. These data also may be useful to the Missouri Department of Transportation as a minor flood-flow assessment of the bridges for stability and integrity issues with respect to bridge scour during floods. Bathymetric data were collected around every in-channel pier. Scour holes were present at most piers for which bathymetry could be obtained, except those on banks or surrounded by riprap. Occasionally, scour holes were minor and difficult to discern from nearby dunes and ripples. All bridge sites in this study were surveyed and documented in previous studies. Although partial exposure of substructural support elements was observed at several piers, at most sites the exposure most likely is minimal compared to the overall substructure that remains buried in bed material at these piers. The notable exceptions are piers 12 and 13 at structure L0135 on State Highway 51 at Chester, Illinois, where the bedrock material was fully exposed around the piers. The average difference between the bathymetric surfaces between 2022 and 2018 varied from 0.41 foot higher to 1.86 feet lower. Between 2022 and 2014, the average difference between the bathymetric surfaces varied from 1.02 feet higher to 4.69 feet lower. Only the two sites on the Missouri River and the Caruthersville site were surveyed in 2011; for those sites, the average difference between the bathymetric surfaces varied from 5.83 feet higher to 1.34 feet lower. The most substantial overall net gain of sediment in a reach was between 2011 and 2022 at structure A1700 near Caruthersville, Mo. (site 38). This result was expected because structure A1700 is downstream from the confluences of the Missouri and Ohio Rivers, and therefore subject to the largest streamflows, the largest streamflow fluctuations, and the most substantial sediment flux, as has historically been observed at this site. The presence of riprap blankets, pier size and nose shape, and alignment to flow had a substantial effect on the size of the scour hole observed for a given pier. Piers that were surrounded by riprap blankets had scour holes that were substantially smaller (to nonexistent) compared to piers at which no rock or riprap were present. New riprap blankets were surveyed at pier 3 of structure L0098 at Brownville, Nebraska, and at piers 15–18 of structure A1700 near Caruthersville, Mo., that effectively mitigated the scour holes historically observed at these piers. Narrow piers having round or sharp noses that were aligned with flow often had scour holes that were difficult to discern from nearby bed features, whereas piers having wide or blunt noses resulted in larger, deeper scour holes. Several of the structures had piers that were skewed to primary approach flow. Scour holes near these piers consistently displayed greater depth on the side of the pier with impinging flow and deposition on the leeward side of the pier.

Missouri↗

USGS2025

Groundwater salinity: Applying the specific conductance and water type proxy

Groundwater is increasingly needed for water supplies but may have limited utility in some locations because of its salinity. Salinity, often expressed as total dissolved solid (TDS), is frequently estimated using specific conductance (SC) measurements. However, the commonly used proxy (0.65 multiplied by SC to indicate TDS, common in many handheld meters) can result in inaccurate TDS estimates. First, the TDS–SC relationship is not linear over the entire concentration range of groundwater. Furthermore, the TDS (and salinity)–SC relationships vary substantially depending on the major-ion composition. Here we develop a proxy method utilizing SC and major-ion water type to estimate TDS and salinity specifically for groundwaters. Compared to most surface waters, groundwater tends to have a wider range of salinity (fresh to highly saline) and higher concentrations of bedrock-derived solutes such as carbonate ions, silica, and many other ions. The dataset used to develop the proxies includes water chemistry data from 149,059 discrete groundwater samples. The groundwater proxies, which employ nonlinear log–log relations, utilize five water types (HCO 3 , Cl, Ca-Mg-SO 4 , Na-K-SO 4 , and mixed waters), are accurate (median percent difference between TDS and salinity determined using the proxy compared to discrete measurements was <±0.8%) over a wide range of SC (up to 200 mS/cm), rapid, cost-effective, and can be measured on-site.

Groundwater↗

USGS2026

Use of precariously balanced rocks to constrain postglacial earthquake magnitudes in New England, United States

We use the age and fragility of 13 precariously balanced rocks (PBRs) in Massachusetts, New Hampshire, and southwestern Maine to evaluate the estimated probabilistic seismic hazard (PSH) from the U.S. Geological Survey’s National Seismic Hazard Model (NSHM), and also develop a map of maximum postglacial earthquake magnitudes in the region. The PBRs are erratic boulders left behind by the retreat of the Laurentide ice sheet between 13 and 18 ka, and published ice retreat maps are used to estimate their fragility ages. The fragilities and ages of the rocks appear to be consistent with the NSHM, in that the estimated earthquake magnitudes and resulting ground motions that would topple them are only expected on timescales longer than their fragility ages. This result, on the North American passive margin, contrasts with PBR studies at active plate boundaries, where the PBR constraints imply large reductions to estimated PSH. It may be that the PBRs are not old enough in the eastern United States to reveal the same PSH modeling issues as those revealed in the plate boundary settings. The study provides constraints on maximum magnitudes of postglacial earthquakes across much of Massachusetts, New Hampshire, and southwestern Maine, with the constraints limited to the ages of the PBRs.

Maine. Massachusetts, New Hampshire↗

USGS2026

USGS Geochron—A database of geochronological and thermochronological dates and data—Technical documentation

Geochronological and thermochronological data are essential for constraining the timing and rates of geological processes, supporting geologic mapping, natural hazard assessment, and resource exploration. The U.S. Geological Survey (USGS) Geochron Database is a centralized, relational database that integrates USGS and State geological survey data in accordance with the National Geologic Mapping Act of 1992 and its reauthorizations. This report documents the structure and development of the database, including its standardized schema, controlled vocabularies, and protocols for compiling legacy and newly published data. The database is designed to adhere to FAIR (Findable, Accessible, Interoperable, and Reusable) data principles and currently (2026) includes data from a wide range of geochronological and thermochronological methods. Public access is provided through the USGS Geochron Database Explorer, a browser-based geographic information system (GIS) interface, and through versioned data releases available on ScienceBase, which provide sample-level summary data and detailed analytical information. The USGS Geochron Database is structured to be extensible, supporting the inclusion of additional methods and data types as they are compiled. This format ensures long-term utility and aligns with the Mapping Act’s directive to create a national archive of geochronological information that adds interpretive value to geologic map data. Its design reflects a commitment to data transparency, scientific reproducibility, and national geoscience priorities.

Data Report↗

USGS2024

Volcanic gas monitoring

Introduction As magma rises through the crust, decreasing pressure conditions allow volatiles to exsolve from the magma. These volatiles then migrate upward through the crust, where they can be stored at shallower levels or escape to the atmosphere. Rising magma also heats rock masses beneath volcanic centers, causing water in shallow aquifers and hydrothermal systems to boil and release additional gases and steam (see chapter F , this volume; Ingebritsen and Hurwitz, 2024). The chemistry and quantity of gases that reach the surface during periods of quiescence or volcanic unrest can reveal that gas-rich magma is ascending, crystallizing, or alternatively stalling, with important implications for volcanic hazard (for example, Sutton and others, 1992; Aiuppa and others, 2007, 2021; Werner and others, 2009, 2011, 2012; Moretti and others, 2013; de Moor and others, 2016; Lewicki and others, 2019; Edmonds and others, 2022; Kern and others, 2022; Kunrat and others, 2022). Most volcanoes in Alaska and the western United States are characterized by weak degassing, with one or more low-temperature fumaroles (typically near the local boiling temperature of water) and connect to a deeper and sometimes extensive hydrothermal system (for example, McGee and others, 2001; Symonds and others, 2003a, b). Hydrothermal systems will affect the chemistry of rising gases exsolved from deeper magma (Symonds and others, 2001), including sulfur dioxide (SO 2 ), hydrogen chloride (HCl), and water vapor (for example, Doukas and Gerlach, 1995; Gerlach and others, 1998, 2008; Symonds and others, 2001; Werner and others, 2013). As an example, depending on factors such as temperature, pressure, and oxidation state, rising SO 2 will react with groundwater to form hydrogen sulfide (H 2 S) gas, dissolved sulfate (SO 4 2− ), or elemental sulfur (Christenson, 2000; Symonds and others, 2001; Werner and others, 2008). The reaction and dissolution of SO 2 into shallow groundwater is commonly referred to as scrubbing, and can reduce the likelihood that ascending, degassing magma can be detected. Carbon dioxide, however, in addition to exsolving from magma early in the ascent process, is not easily removed by hydrothermal fluids (Lowenstern, 2001). As scrubbing and other processes take place, the SO 2 /H 2 S, CO 2 /SO 2 , and CO 2 /H 2 S ratios may change. High rates of SO 2 emission indicate that magma has moved to relatively shallow levels in the volcano and that the system has heated up enough to establish dry pathways from depth to the surface. Monitoring multiple gas species and the total output of those species is thereby useful for volcano monitoring during both periods of quiescence, to establish background degassing conditions, and during unrest, when gas geochemistry and emission rates can provide information on changing conditions, such as magma ascent. To provide context for multidisciplinary volcano forecasts, we focus on the following two key required capabilities: (1) characterizing baseline geochemistry and gas discharge from volcanoes and volcanic regions and (2) monitoring changes in gas geochemistry and discharge to inform forecasts of volcanic eruptions and their effects. Sufficient baseline data must be collected to identify and interpret anomalous degassing associated with volcanic unrest (for example, Sorey and others, 1998; Rouwet and others, 2014). Differences in volcano type, baseline degassing rates, local hydrology, and geography (for example, high versus low latitude) will result in a different baseline for each volcano. Volcanoes of any threat level that exhibit one or more degassing phenomena would ideally be monitored by techniques needed to establish baseline degassing data, with the sampling frequency of baseline data dictated by the threat level (table E1). Additional monitoring techniques become necessary during periods of unrest. In general, three of the most important techniques for gas monitoring are (1) direct sampling of fumarole, spring, and soil gases for laboratory geochemical measurements, (2) measurements of the chemical composition of the volcanic plume and emission rates of major gas species (for example, H 2 O, CO 2 , SO 2 , and H 2 S) by satellite, airborne, or ground-based techniques, and (3) measurements of diffuse emissions of CO 2 and other gases through soils. Various methods and instruments may be useful both for baseline studies and during unrest.

Scientific Investigations Report↗

USGS2024

Complex hydrology and variability of nitrogen sources in a karst watershed

Streams draining karst areas with rapid groundwater transit times may respond relatively quickly to nitrogen reduction strategies, but the complex hydrologic network of interconnected sinkholes and springs is challenging for determining the placement and effectiveness of management practices. This study aims to inform nitrogen reduction strategies in a representative agricultural karst setting of the Chesapeake Bay watershed (Fishing Creek watershed, Pennsylvania) with known elevated nitrate contamination and a previous documented groundwater residence time of less than a decade. During baseflow conditions, streamflow did not increase with drainage area. Headwaters and the main stem lost substantial flow to sinkholes until eventually discharging along large springs downstream. Seasonal hydrologic conditions shift the flow and nitrogen load spatially among losing and gaining stream sections. A compilation of nitrogen source inputs with the geochemistry and the pattern of enrichment of δ 15 N and δ 18 O suggest that the nitrogen in streams and springs during baseflow represents a mixture of manure, fertilizer, and wastewater sources with low potential for denitrification. The pH and calcite saturation index increased along generalized flow paths from headwaters to springs and indicate shorter groundwater residence times in baseflow during the spring versus summer. Given the substantial investment in management practices, fixed monitoring sites could incorporate synoptic water sampling to properly monitor long-term progress and help inform management actions in karst watersheds. Although karst watersheds have the potential to respond to nitrogen reduction strategies due to shorter groundwater residence times, high nitrogen inputs, effectiveness of conservation practices, and release of legacy nutrients within the karst cavities could confound progress of water quality goals.

Pennsylvania↗

USGS2026

Hazard potential of compound flooding from rainfall, storm surge, and groundwater in coastal New York and Connecticut

Compound flood events, the co-occurrence of multiple flood drivers, can result in flood hazard potential exceeding that of any single driver alone. To evaluate compound flooding in a semi-urbanized coastal area, historical records dating back to 1970 are used to study the co-occurrences of high precipitation, storm surge, and shallow groundwater conditions along the coastlines of New York and Connecticut. Joint return periods for coincident precipitation-surge events were computed using statistical dependence models and compared to the assumption of independence as a ratio, referred to here as a return period adjustment. Results indicate distinct seasonality where compound events in the area disproportionately occur in the cold season between October and April. Return period adjustments range from a factor of 1 to almost 9, demonstrating the range in precipitation-storm surge dependence across the study area. Across all 24 station triad locations, groundwater levels were elevated during times of precipitation- surge co-occurrence, reflecting the tendency for coastal storms and shallow groundwater conditions to co-occur seasonally. The result is a pseudo-trivariate compound flood hazard score and corresponding hazard map that integrates dependence between daily precipitation-surge events and overall monthly groundwater levels (as a precondition) into a relative compound hazard score. The location with the highest compound flood hazard score is on the south shore of Long Island, as well as locations across coastal Connecticut where groundwater levels compound the co-occurrence of heavy precipitation and storm surge.

Connecticut, New York↗

USGS2024

A decade of shaking in the Garden City: The dynamics of preparedness, perceptions, and beliefs in Canterbury, New Zealand, and implications for earthquake information

This study explored earthquake preparedness over time - before, during, and 10 years after the Canterbury Earthquake Sequence (CES) in Aotearoa New Zealand (NZ). Surveys of Canterbury residents were conducted in 2009, 2013 and again in 2021, using variables derived from Community Engagement Theory (CET). The surveys measured earthquake perceptions and beliefs, participation and engagement, and preparedness actions. Results were compared across the three samples. Findings indicate that perceptions and beliefs (e.g. risk perception, outcome expectancy beliefs), and types of preparedness actions taken (e.g. collection of survival items, structural preparedness, community and agency relationships), differed over time, depending on people’s experiences before, during, and after the CES. For example, during and after the CES people were more likely to believe that preparing provided a benefit to daily life, but less likely to think it could reduce property damage, perhaps due to people’s experiences of disruption and damage during the earthquakes. An understanding of such dynamics can assist with the provision and timing of risk and preparedness information. This study highlights the importance of providing applicable and actionable preparedness information, that is relevant to people’s experiences, throughout an earthquake sequence. Such information might evolve and change in focus over time depending on risks and needs. Focus could also be given to information that builds peoples beliefs and capacities to undertake preparedness in evolving situations. Understanding preparedness in the context of different experiences and timeframes is useful in helping update models such as the CET, where the dynamics of time might be better incorporated.

Canterbury↗

USGS2025

Dietary bioavailability of uranium to a model freshwater invertebrate

Uranium (U) mining increases environmental exposures. Understanding how U is taken up by organisms can aid in evaluating the potential for bioaccumulation and toxicity. Although the importance of aqueous geochemical speciation is well recognized for U bioavailability after dissolved exposures, far less is known about the processes controlling U bioavailability after dietary exposures. This study characterizes the biogeochemical drivers of dietary U uptake in the freshwater snail Lymnaea stagnalis in laboratory experiments. Solids tested included benthic diatoms pre-exposed to dissolved U(VI), soils from contaminated U mine sites, and colloidal hydrous ferric oxide (HFO) synthesized in the presence of dissolved U(VI) or with U complexed by natural organic matter (NOM). Results showed that U was bioavailable from all solids. Uranium assimilation efficiency (AE), a proxy for dietary U bioavailability, varied among solids. AE was lowest for the U-contaminated soils (25 ± 17%) and highest for the U-laden diatoms (71 ± 13%). AE varied slightly among HFO preparations, suggesting modest influences of NOM and iron on U bioavailability. Increases in dietary U exposures reduced feeding rates, and the extent of feeding inhibition appeared inversely related to U bioavailability. The high U assimilation and range of bioavailability have implications for toxicity risks inferred without considering dietary uptake.

Environmental Science and Technology↗