USGS Science⌕ Search

SEARCH · USGS Science

Results for “Scientific American”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

472 records · Page 27Linked to original sources
USGS2016

Water-level altitudes 2016 and water-level changes in the Chicot, Evangeline, and Jasper aquifers and compaction 1973–2015 in the Chicot and Evangeline aquifers, Houston-Galveston region, Texas

Most of the land-surface subsidence in the Houston-Galveston region, Texas, has occurred as a direct result of groundwater withdrawals for municipal supply, commercial and industrial use, and irrigation that depressured and dewatered the Chicot and Evangeline aquifers, thereby causing compaction of the aquifer sediments, mostly in the fine-grained silt and clay layers. This report, prepared by the U.S. Geological Survey in cooperation with the Harris-Galveston Subsidence District, City of Houston, Fort Bend Subsidence District, Lone Star Groundwater Conservation District, and Brazoria County Groundwater Conservation District, is one in an annual series of reports depicting water-level altitudes and water-level changes in the Chicot, Evangeline, and Jasper aquifers and measured cumulative compaction of subsurface sediments in the Chicot and Evangeline aquifers in the Houston-Galveston region. The report contains regional-scale maps depicting approximate 2016 water-level altitudes (represented by measurements made during December 2015–March 2016) for the Chicot, Evangeline, and Jasper aquifers; maps depicting 1-year (2015–16) water-level changes for each aquifer; maps depicting approximate contoured 5-year (2011–16) water-level changes for each aquifer; maps depicting approximate contoured long-term (1990–2016 and 1977–2016) water-level changes for the Chicot and Evangeline aquifers; a map depicting approximate contoured long-term (2000–16) water-level changes for the Jasper aquifer; a map depicting locations of borehole-extensometer sites; and graphs depicting measured long-term cumulative compaction of subsurface sediments at the extensometers during 1973–2015. Tables listing the water-level data used to construct each water-level map for each aquifer and the measured long-term cumulative compaction data for each extensometer site are included. Graphs depicting water-level measurement data also are included; these graphs can be used to approximate changes in effective stress caused by changes in groundwater withdrawal from the Chicot and Evangeline aquifers. In 2016, water-level-altitude contours for the Chicot aquifer ranged from 200 feet (ft) below the vertical datum (North American Vertical Datum of 1988; hereinafter, datum) in a localized area in northwestern Harris County to 200 ft above datum in west-central Montgomery County. Water-level changes during 2015–16 in the Chicot aquifer ranged from a 39-ft decline to a 26-ft rise. Contoured 5-year and long-term changes in water-level altitudes of the Chicot aquifer ranged from a 30-ft decline to a 20-ft rise (2011–16), from a 140-ft decline to a 160-ft rise (1990–2016), and from a 120-ft decline to a 200-ft rise (1977–2016). In 2016, water-level-altitude contours for the Evangeline aquifer ranged from 250 ft below datum in three separate areas in south-central Montgomery County and extending into north-central Harris County, in west-central Harris County, and in southwestern Harris County to 200 ft above datum in southeastern Grimes and northwestern Montgomery Counties. Water-level changes during 2015–16 in the Evangeline aquifer ranged from a 65-ft decline to a 61-ft rise. Contoured 5-year and long-term changes in water-level altitudes of the Evangeline aquifer ranged from a 60-ft decline to a 40-ft rise (2011–16), from a 160-ft decline to a 160-ft rise (1990–2016), and from a 320-ft decline to a 240-ft rise (1977–2016). In 2016, water-level-altitude contours for the Jasper aquifer ranged from 200 ft below datum in south-central Montgomery County extending into north-central Harris County to 250 ft above datum in northwestern Montgomery County and extending into eastern Grimes County and southwestern Walker County. Water-level changes during 2015–16 in the Jasper aquifer ranged from a 38-ft decline to a 51-ft rise. Contoured 5-year and long-term changes in water-level altitudes of the Jasper aquifer ranged from a 60-ft decline to a 40-ft rise (2011–16) and from a 220-ft decline to a 20-ft decline (2000–16). Compaction of subsurface sediments (mostly in the fine-grained silt and clay layers) in the Chicot and Evangeline aquifers was recorded continuously by using 13 extensometers at 11 sites that were either activated or installed between 1973 and 1980. During the period of record beginning in 1973 (or later depending on activation or installation date) and ending in December 2015, measured cumulative compaction at the 13 extensometers ranged from 0.095 ft at the Texas City-Moses Lake extensometer to 3.666 ft at the Addicks extensometer. From January through December 2015, the Northeast, Southwest, Addicks, Johnson Space Center, and Clear Lake (deep) extensometers recorded net decreases in land-surface elevation, but the Lake Houston, East End, Texas City-Moses Lake, Baytown C–1 (shallow), Baytown C–2 (deep), Seabrook, Clear Lake (shallow), and Pasadena extensometers recorded net increases in land-surface elevation. For the 11 extensometer sites during the selected years 1988, 1998, 2008, 2012, and 2015, the smallest effective stress (20.12 pounds per square inch [psi]) was estimated at the Texas City-Moses Lake extensometer site and was produced by a measured water level of 46.42 ft below land-surface datum (blsd) in January 2008. The corresponding net compaction during 2007 at this site was 0.001 ft. The largest effective stress (174.86 psi) was estimated at the Addicks extensometer site and was produced by a measured water level of 403.38 ft blsd in January 1998. The corresponding net compaction at the Addicks site was 0.067 ft in 1997. The 2011 drought caused water-level declines in the aquifers that were documented by the water-level-measurement data collected in January 2012. During the 2011 drought, the 13 extensometers recorded varying amounts of compaction that ranged from a net compaction value of 0.002 ft recorded by the Texas City-Moses Lake extensometer to a net compaction value of 0.192 ft recorded by the Pasadena extensometer. Water-level data for 1988, 1998, 2008, 2012, and 2015 and the corresponding net compaction values recorded by the extensometers for 1987, 1997, 2007, 2011, and 2014 were used to illustrate the cause and effect relations between changes in water level caused by groundwater withdrawals and resulting changes in effective stress. Changes in effective stress are related to changes in land-surface elevations caused by compaction of the fine-grained sediments composing the Chicot and Evangeline aquifers. The rate of compaction varies from site to site because of differences in rates of groundwater withdrawal in the areas adjacent to each extensometer site; differences among sites in the ratios of sand, silt, and clay and their corresponding compressibilities; and previously established preconsolidation heads. It is not appropriate, therefore, to extrapolate or infer a rate of compaction for an adjacent area on the basis of the rate of compaction recorded by proximal extensometers.

Texas↗
USGS2017

Suitability of river delta sediment as proppant, Missouri and Niobrara Rivers, Nebraska and South Dakota, 2015

Sediment management is a challenge faced by reservoir managers who have several potential options, including dredging, for mitigation of storage capacity lost to sedimentation. As sediment is removed from reservoir storage, potential use of the sediment for socioeconomic or ecological benefit could potentially defray some costs of its removal. Rivers that transport a sandy sediment load will deposit the sand load along a reservoir-headwaters reach where the current of the river slackens progressively as its bed approaches and then descends below the reservoir water level. Given a rare combination of factors, a reservoir deposit of alluvial sand has potential to be suitable for use as proppant for hydraulic fracturing in unconventional oil and gas development. In 2015, the U.S. Geological Survey began a program of researching potential sources of proppant sand from reservoirs, with an initial focus on the Missouri River subbasins that receive sand loads from the Nebraska Sand Hills. This report documents the methods and results of assessments of the suitability of river delta sediment as proppant for a pilot study area in the delta headwaters of Lewis and Clark Lake, Nebraska and South Dakota. Results from surface-geophysical surveys of electrical resistivity guided borings to collect 3.7-meter long cores at 25 sites on delta sandbars using the direct-push method to recover duplicate, 3.8-centimeter-diameter cores in April 2015. In addition, the U.S. Geological Survey collected samples of upstream sand sources in the lower Niobrara River valley. At the laboratory, samples were dried, weighed, washed, dried, and weighed again. Exploratory analysis of natural sand for determining its suitability as a proppant involved application of a modified subset of the standard protocols known as American Petroleum Institute (API) Recommended Practice (RP) 19C. The RP19C methods were not intended for exploration-stage evaluation of raw materials. Results for the washed samples are not directly applicable to evaluations of suitability for use as fracture sand because, except for particle-size distribution, the API-recommended practices for assessing proppant properties (sphericity, roundness, bulk density, and crush resistance) require testing of specific proppant size classes. An optical imaging particle-size analyzer was used to make measurements of particle-size distribution and particle shape. Measured samples were sieved to separate the dominant-size fraction, and the separated subsample was further tested for roundness, sphericity, bulk density, and crush resistance. For the bulk washed samples collected from the Missouri River delta, the geometric mean size averaged 0.27 millimeters (mm), 80 percent of the samples were predominantly sand in the API 40/70 size class, and 17 percent were predominantly sand in the API 70/140 size class. Distributions of geometric mean size among the four sandbar complexes were similar, but samples collected from sandbar complex B were slightly coarser sand than those from the other three complexes. The average geometric mean sizes among the four sandbar complexes ranged only from 0.26 to 0.30 mm. For 22 main-stem sampling locations along the lower Niobrara River, geometric mean size averaged 0.26 mm, an average of 61 percent was sand in the API 40/70 size class, and 28 percent was sand in the API 70/140 size class. Average composition for lower Niobrara River samples was 48 percent medium sand, 37 percent fine sand, and about 7 percent each very fine sand and coarse sand fractions. On average, samples were moderately well sorted. Particle shape and strength were assessed for the dominant-size class of each sample. For proppant strength, crush resistance was tested at a predetermined level of stress (34.5 megapascals [MPa], or 5,000 pounds-force per square inch). To meet the API minimum requirement for proppant, after the crush test not more than 10 percent of the tested sample should be finer than the precrush dominant-size class. For particle shape, all samples surpassed the recommended minimum criteria for sphericity and roundness, with most samples being well-rounded. For proppant strength, of 57 crush-resistance tested Missouri River delta samples of 40/70-sized sand, 23 (40 percent) were interpreted as meeting the minimum criterion at 34.5 MPa, or 5,000 pounds-force per square inch. Of 12 tested samples of 70/140-sized sand, 9 (75 percent) of the Missouri River delta samples had less than 10 percent fines by volume following crush testing, achieving the minimum criterion at 34.5 MPa. Crush resistance for delta samples was strongest at sandbar complex A, where 67 percent of tested samples met the 10-percent fines criterion at the 34.5-MPa threshold. This frequency was higher than was indicated by samples from sandbar complexes B, C, and D that had rates of 50, 46, and 42 percent, respectively. The group of sandbar complex A samples also contained the largest percentages of samples dominated by the API 70/140 size class, which overall had a higher percentage of samples meeting the minimum criterion compared to samples dominated by coarser size classes; however, samples from sandbar complex A that had the API 40/70 size class tested also had a higher rate for meeting the minimum criterion (57 percent) than did samples from sandbar complexes B, C, and D (50, 43, and 40 percent, respectively). For samples collected along the lower Niobrara River, of the 25 tested samples of 40/70-sized sand, 9 samples passed the API minimum criterion at 34.5 MPa, but only 3 samples passed the more-stringent criterion of 8 percent postcrush fines. All four tested samples of 70/140 sand passed the minimum criterion at 34.5 MPa, with postcrush fines percentage of at most 4.1 percent. For two reaches of the lower Niobrara River, where hydraulic sorting was energized artificially by the hydraulic head drop at and immediately downstream from Spencer Dam, suitability of channel deposits for potential use as fracture sand was confirmed by test results. All reach A washed samples were well-rounded and had sphericity scores above 0.65, and samples for 80 percent of sampled locations met the crush-resistance criterion at the 34.5-MPa stress level. A conservative lower-bound estimate of sand volume in the reach A deposits was about 86,000 cubic meters. All reach B samples were well-rounded but sphericity averaged 0.63, a little less than the average for upstream reaches A and SP. All four samples tested passed the crush-resistance test at 34.5 MPa. Of three reach B sandbars, two had no more than 3 percent fines after the crush test, surpassing more stringent criteria for crush resistance that accept a maximum of 6 percent fines following the crush test for the API 70/140 size class. Relative to the crush-resistance test results for the API 40/70 size fraction of two samples of mine output from Loup River settling-basin dredge spoils near Genoa, Nebr., four of five reach A sample locations compared favorably. The four samples had increases in fines composition of 1.6–5.9 percentage points, whereas fines in the two mine-output samples increased by an average 6.8 percentage points.

Nebraska, South Dakota↗
USGS2021

Status and understanding of groundwater quality in the northern Sierra Nevada foothills domestic-supply aquifer study units, 2015–17—California GAMA Priority Basin Project

Groundwater quality in the northern Sierra Nevada foothills region of California was investigated as part of California State Water Resources Control Board (SWRCB) Groundwater Ambient Monitoring Assessment Priority Basin Project (GAMA-PBP). The region was divided into two study units: the Yuba-Bear watersheds (YBW) study unit and the American-Cosumnes-Mokelumne watersheds (ACMW) study unit. The GAMA-PBP made a spatially unbiased assessment of aquifer systems used for domestic drinking-water supply in the study region, which are predominantly composed of fractured, hard-rock aquifers of varying lithology. These assessments characterized the quality of raw groundwater to evaluate ambient conditions in the domestic-supply aquifer and not the quality of treated drinking water. The study included three components: (1) a status assessment , which characterized the quality of groundwater resources used for domestic drinking-water supply in the YBW and ACMW study units; (2) an understanding assessment , which evaluated natural and anthropogenic explanatory factors that could potentially affect groundwater quality in the study region; and (3) a comparative assessment between the groundwater resources used for domestic and public drinking-water supply in the study region. The status assessment was based on data collected by the GAMA-PBP from 74 sites in the YBW study unit during 2015–16 and 67 sites in the ACMW study unit from 2016 to 2017. To contextualize water-quality results, concentrations of water-quality constituents in ambient groundwater were compared to regulatory and non-regulatory benchmarks typically used by the State of California and Federal agencies as health-based or aesthetic standards for public drinking water. The status assessment used a grid-based method to estimate proportions of groundwater resources with concentrations approaching or exceeding benchmark thresholds. This method provides spatially unbiased results and allows inter-comparability with similar groundwater-quality assessments. Inorganic constituents with health-based benchmarks were present at high relative concentration (RC), meaning they exceeded the benchmark threshold, in 5.4 and 10 percent of domestic-supply aquifer systems in the YBW and ACMW study units, respectively. Inorganic constituents with aesthetic-based benchmarks were detected at high-RCs in 20 and 28 percent of the YBW and ACMW study units, respectively. The inorganic constituents present at high RC were arsenic, barium, boron, molybdenum, strontium, nitrate, adjusted gross-alpha particle activity, chloride, total dissolved solids, specific conductance, iron, manganese, and hardness. Groundwater samples were tested for presence or absence of three microbial indicators (total coliform, Escherichia coli , and Enterococci ). At least one microbial indicator was present in 26 and 28 percent of the YBW and ACMW study units, respectively. At least one organic constituent was detected in 30 and 42 percent of the YBW and ACMW study units, respectively. Organic constituents were not present at high RC, but tetrachloroethene (PCE), trichloroethene (TCE), and toluene were detected in the YBW study unit at moderate RC (between the benchmark concentration and one-tenth of the benchmark concentration). Methyl tert -butyl ether (MTBE) and chloroform were present at low RC (less than one-tenth of the benchmark concentration) in the YBW and ACMW study units with detection frequencies greater than 10 percent. Perchlorate, a constituent of special interest, was detected in 31 and 41 percent of the YBW and ACMW study units, respectively, at either low or moderate RCs. Relations among select water-quality constituents and potential explanatory factors were evaluated using statistical and graphical approaches. Nitrate, microbial indicators, and perchlorate were all correlated to elevation-dependent variables relating to climate, land use, and recharge condition. Isotopic and dissolved noble-gas tracers indicated these water-quality constituents are associated with recharge conditions associated with irrigation during the summer dry-season, which is common in areas of rural-residential or agricultural land uses. Higher concentrations of iron and manganese were primarily associated with anoxic groundwater in aquifers of metasedimentary lithology. Increased hardness was primarily associated with anoxic groundwater in aquifers of mafic-ultramafic or metavolcanics lithologies at lower elevations in the study region in the Melones fault zone. Chloroform and MTBE were associated with shallow groundwater (wells depths less than 130 m) under oxic and anoxic redox conditions, respectively. The comparative assessment evaluated differences between the aquifer systems used for domestic- and public-supply in study region based on (1) well-construction characteristics, and (2) water quality. Analysis of over 60,000 well-completion reports in the study region showed that although domestic-supply wells span the deepest depth zones in regional aquifers, median depths for public-supply wells were significantly greater than those of domestic-supply wells in both study units. Water-quality data from more than 300 public-supply wells in the study region were assessed using a spatially weighted method for calculation aquifer-scale proportions and compared with the domestic-supply assessment results. Detections of inorganic constituents at high RC and detection frequencies for organic constituents were generally similar between the domestic- and public-supply aquifer systems in both study units, with a few notable exceptions in the ACMW study unit: nitrate was greater for the public- compared to domestic-supply aquifer system and both manganese, hardness, and MTBE were greater in the domestic- compared to public-supply aquifer system. These differences are likely related to contrasting land uses, aquifer lithologies, landscape positions, and depths characterizing domestic- and public-supply wells in the ACMW study unit. Overall, fewer samples from domestic-supply wells in the northern Sierra Nevada foothills exceeded health-based benchmarks compared to aesthetic-based benchmarks for groundwater quality. Exceedences of health-based benchmarks were primarily caused by nitrate and coliform bacteria, which were associated with recharge from diverted surface water used primarily for irrigation. Exceedences of aesthetic-based benchmarks were primarily caused by iron, managanese, and hardness, which were associated with geologic factors. Regional irrigation practices and aquifer lithology can affect groundwater quality in fractured-rock aquifers in the northern Sierra Nevada foothills used for domestic drinking-water supply.

California↗
USGS2020

Sediment lithology and borehole erosion testing, American and Sacramento Rivers, California

Executive Summary A field investigation intended to measure the potential for erosion of sediments beside the American and Sacramento Rivers near Sacramento, California, is described. The study featured two primary components: (1) drilling and soil sampling to reveal lithology, down to depths matching the local river thalweg, where possible, and (2) borehole erosion tests (BETs) as described by Briaud and others (2017) at many of the same locations. The latter test involved drilling a vertical hole, measuring its diameter profile, inserting a hollow drilling rod to almost the bottom of the hole, and pumping fluid through the drilling rod at a known discharge for a chosen time interval. The hole was then resurveyed to establish an erosion rate (change in borehole radius divided by duration of flow event) as a function of depth, and the test was repeated. This test was performed with water as the erosive fluid at 12 locations, with 1 test repeated with drilling mud. Lithology holes were drilled at these same locations and an additional five locations. Drilling operations took place on river left and river right on the American River and river left (left bank, when looking downstream) on the Sacramento River. The drilling to acquire sediment samples and reveal lithology involved the use of a mobile drilling rig equipped with a 6-inch (in.) auger, a 140-pound pneumatic hammer to drive split spoon and Calmod samplers, and a piston to push Shelby tube samplers to obtain samples of clayey material. Blow count (hammer blows per 6-in. sampler advance) was recorded while sampling, and the process was logged using standard U.S. Army Corps of Engineers (USACE), Sacramento District procedures. Sediment samples were identified and described in the field per ASTM D2488 and then delivered to a USACE laboratory and to Texas A&M University for additional laboratory analysis. The BETs were performed with the same drilling rig that performed the drilling for definition of lithology. In most instances, tests were limited to regions above the water table, to avoid slumping of the borehole and heaving sands pushing into the hole. Most of the tests featured sediments that were primarily silty sand or sandy silt. The testing procedure involved comparing borehole profiles before and after passing an assumed constant discharge through a drilling rod to the bottom of the drilled hole. Discharge and water losses were logged during the testing procedure, and water losses into the walls of the drilled hole were typically less than 5 percent of the introduced volume. For the tests performed with water, the coefficient of variation of the discharge ranged from 4.5 to 28 percent, with a mean of 13 percent, but the mean discharge appeared to be reasonably steady over the typical test duration of 10–30 minutes. It was thus assumed that discharge was constant and water losses during the tests were neglected. Coefficients of variation of the discharge for the three tests performed with drilling mud were much higher (20–50 percent), but erosion rates were much smaller. Resolution of the borehole caliper-reported diameter was 0.1 in. and several of the tests lasted for 10 minutes. With boreholes measured twice, before and after each test, and averaged, these numbers correspond to an apparent erosion rate (radius change divided by test duration) of 0.3 inches per hour (in/hr), which is a theoretical lower bound on what could be measured with this approach and equipment. In practice, 0.5 in/hr appears to be a more realistic lower bound on the detectable erosion rate, based on inspection of computed changes and erosion rates. Three flow speeds (5, 8, and 12 feet per second; ft/s) were targeted for the tests. Because of equipment limitations, it was not possible in the field to reach an average of 12 ft/s throughout any given borehole, although much higher flow speeds were reached locally in some cases. Most tests featured at least two different flow rates, and the borehole was typically surveyed at least twice for each condition, to allow averaging to reduce the influence of random diameter measurement errors. Errors arising from out-of-round boreholes appeared to be uncommon. Briaud and others (2017) recommend stepped increases in the flow rate during a borehole test. This approach was taken during initial testing but proved to be problematic. The drilled hole would be enlarged by the first (smaller) discharge, and then it would be difficult to reach the desired higher flow speed because of the larger annulus between the drilled hole and the drilling rod that supplied the water for testing. This was largely solved by starting with a high discharge and, in many cases, maintaining it for subsequent tests with the average flow speed decreasing as the hole enlarged. Several different measures of erosion rate were computed and investigated by comparison to lithological profiles. The vertically averaged erosion rate for each hole was computed, but this result does not reveal vertical variability of erodibility; and the mean flow speed within the hole is not a good representation of the speed when attempting to determine a relationship between erosion rate and flow speed. Instead, for each 6-inch layer within the hole, vertically averaged erosion rates and local flow speeds were computed and plotted. Where possible, the soil type for each layer was identified. For later laboratory analysis, project protocol dictated collection of Shelby tube samples whenever clay was encountered. Plots of erosion rate versus flow speed displayed scatter that indicate that several other factors influence the erosion potential of the soil. Blow count was not a good predictor variable; it is better correlated with soil type than erodibility. Soils were classified as sand, silt, or clay, depending on which soil type dominated within a sample. In general, those classified as sand and silt did not reveal clear patterns allowing erosion rate to be computed directly from flow speed, but the test results define the range and bounds on the erosion rate. Results for clay were slightly clearer with the erosion rate increasing with flow speed, once a threshold had been reached. In this case, the erosion rate appeared to change near a speed of 7 ft/s; above this threshold, erosion rates jumped from less than 2 in/hr to greater than 3 in/hr. Even for soils with similar classifications, large differences in erodibility were observed between sites and in different layers within an individual hole. One potential means of dealing with this problem would be to perform more tests at each site to allow establishment of relationships between flow speed and erodibility for individual layers within a borehole. The maximum number of tests performed at a site in this study was four, but in some cases, results are available for only one or two flow events. Comparison of data to a set of Erosion Function Apparatus tests that provide better resolution of the vertical variation in the erosion rate versus flow speed relationship would allow further investigation of this idea. It was hypothesized that drilling mud could expand the utility of the test in soft sands by reducing the likelihood of slumping that would be interpreted as erosion. The one test that was performed with drilling mud indicated that it greatly reduced the erosion rate of the soils encountered. It yielded very different results from the test performed at the same site with water. Erosion rate is often expressed as a function of shear stress applied to a soil. In order to compute shear stress on the walls of the drilled hole, one must assume a form for the relationship between flow speed and shear stress and select a friction factor that is often estimated empirically from head loss, observed water-surface profiles, surface roughness, or other data not available in this report. One methodology for computing shear stress from flow speed is discussed in this report, but the test results have been presented in terms of erosion rate versus flow speed to avoid assuming values that are not verifiable via the field data collected in this study. Erosion rate was computed from directly measured values (sequential borehole profiles) and flow speed was computed directly from measured quantities (discharge and borehole geometry). The BET has seen limited application, primarily in clayey soils, whereas most of the soils encountered in this study were primarily sand or silt. The objective of the BET is to determine the erodibility of in situ soil below the ground or riverbed surface. The BET is simple in principle and has the advantage of revealing erodibility of in situ sediments below the ground or riverbed surface; it appears to be very useful in clayey soils, based on previously published work, but is more difficult to apply in sandy soils where slumping and water losses within the hole during testing are more likely to occur. The BET did reveal a large variation in the results both laterally and vertically, even for the same soil-type classification. It is thus recommended that the results be applied considering these spatial variations rather than attempting to universally assign an erosion-rate relationship to a particular soil type. Results have been provided showing the results by site and by sediment classification (sand, silt, and clay), to allow either approach. Where possible, it is important to rely on site-specific results because the erosion-rate relationship for a given soil type varied by site. Data collected during this project have been made publicly available online via the U.S. Geological Survey (USGS) Sciencebase database. The measured borehole profiles, discharge, lithology log sheets, and photos are available in the data release that accompanies this report (see Work and Livsey (2019) in the “Selected References” section for the appropriate link).

California↗