USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Seismology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,661 records · Page 27Linked to original sources
USGS2025

Four-band image mosaic of the Colorado River Corridor downstream of Glen Canyon Dam in Arizona, derived from the May 2021 airborne image acquisition

In May 2021, the U.S. Geological Survey’s Grand Canyon Monitoring and Research Center acquired airborne multispectral high-resolution data for the Colorado River in the Grand Canyon, Arizona. The image data, which consist of four spectral bands (red, band 1; green, band 2; blue, band 3; and near infrared, band 4) with a ground resolution of 20 centimeters, are available as 16-bit unsigned-integer GeoTIFF files in Sankey and others (2024) (available online at https://doi.org/10.5066/P9BBGN6G ). The image files are projected in the State Plane Coordinate System, using the central Arizona zone (202) with the North American Datum of 1983 National Adjustment of 2011. The assessed spatial accuracy for these data is based on 47 ground-control points that were independent from the ground-control points used by the contractor for aerotriangulation and is reported at the 95-percent confidence level as 0.514 meter (m) and a root mean square error of 0.297 m. The intended uses of this dataset are primarily in support of scientific research and monitoring applications. Examples of these applications include high-resolution spatial and temporal change detection of the river channel, geomorphic landforms, riparian vegetation, and backwater and nearshore habitat, as well as other ecosystem-wide mapping. These imagery data also serve as reference material for field science mission planning, as base data for field data collection including community science activities, and as a highly detailed guide for technical boat operation during science activities such as reconnaissance for nighttime missions and navigating rapids during low flows.

Arizona, Nevada, Utah↗
USGS2024

Geologic framework and hydrostratigraphy of the Edwards and Trinity aquifers within northern Medina County, Texas

During 2023–24, the U.S. Geological Survey, in cooperation with the Edwards Aquifer Authority, revised a previous publication of the geologic framework and hydrostratigraphy of the Edwards and Trinity aquifers that was completed during 2018–20 within northern Medina County, Texas. The purpose of this report is to present the updated geologic framework and hydrostratigraphy of the rocks containing the Edwards and Trinity aquifers in northern Medina County from field observations of the surficial expressions of the rocks. The report includes a detailed 1:24,000-scale hydrostratigraphic map with names and descriptions of the geologic and hydrostratigraphic units (HSUs) in the study area. This study includes updates to the geology of the Kainer Formation (or its stratigraphic equivalent, the Fort Terrett Formation) with the addition of a burrowed unit between the basal nodular and dolomitic members. The hydrostratigraphy was also updated with the addition of HSU IIA for the upper part of the Devils River Limestone and the Seco Pass HSU for the burrowed member of the Kainer (or Fort Terrett) Formation. The Cretaceous age rocks (listed in ascending order) in the study area are part of the Trinity Group, Edwards Group and stratigraphically equivalent Devils River Limestone, Washita Group, Eagle Ford Group, Austin Group, and Taylor Group, with isolated areas where Late Cretaceous age igneous rocks have intruded. The groups and formations are composed primarily of relatively thick layers of clays, shales, and limestone. The igneous rocks are coarse-grained ultramafic in composition. Hydrostratigraphically, the rocks exposed in the study area (listed in descending order from land surface) are igneous, the upper confining unit to the Edwards aquifer, the Edwards aquifer, the upper zone of the Trinity aquifer, and the upper part of the middle zone of the Trinity aquifer. The karstic carbonate Edwards and Trinity aquifers developed because of their original depositional history, primary and secondary porosity, diagenesis, fracturing, and faulting. These factors have resulted in development of modified porosity, permeability, and transmissivity within and between the aquifers.

Texas↗
USGS2025

Methodology and technical input for the 2025 U.S. List of Critical Minerals—Assessing the potential effects of mineral commodity supply chain disruptions on the U.S. economy

The Secretary of the Interior, acting through the Director of the U.S. Geological Survey, is tasked by section 7002 (“Mineral Security”) of title VII (“Critical Minerals”) of the Energy Act of 2020 (Public Law 116–260, December 27, 2020, 116th Congress) with reviewing and revising the methodology used to evaluate mineral commodity supply risk and the U.S. List of Critical Minerals (LCM) no less than every 3 years. Following two previous LCM assessments, this analysis represents the latest technical input for evaluating each mineral commodity’s supply risk and determining their recommended status on the LCM. We evaluated mineral commodity supply risk using two criteria: (1) an economic effects assessment that quantified the potential effects of various trade disruption scenarios on the U.S. economy, and (2) an examination of whether the mineral commodity’s U.S. supply chain relied on a sole domestic producer that represented a single point of failure. For the first criterion, postdisruption equilibrium quantities and prices for each mineral commodity were calculated based on their price elasticities of supply and demand and the availability of excess production capacity for each yearlong foreign trade disruption scenario. Subsequently, a nonlinear optimization routine was used with detailed economic input-output tables to estimate the potential economic effects on the U.S. economy of over 1,200 scenarios for 84 mineral commodities. After accounting for the probability of each scenario’s occurrence, the overall results are presented in terms of changes in U.S. gross domestic product (GDP) by individual industry and the economy overall. The results, which ranged from a net decrease in U.S. GDP of nearly $4.5 billion to a net increase of $33 million, largely reflect U.S. import dependency and world production concentration. Using the Jenks natural breaks optimization method, a statistical classification technique, we categorized the mineral commodities into several classes based on this overall risk quantification. Mineral commodities with annualized probability-weighted net decreases in U.S. GDP greater than $2 million were recommended for inclusion on the LCM. If a mineral commodity did not meet the threshold for inclusion on the LCM under the first criterion, its domestic supply chain was examined under the second criterion, which recommended a mineral commodity for inclusion on the LCM if there was only a single domestic producer. Ultimately, the two criteria resulted in the recommendation of the addition of six mineral commodities (in descending risk order, potash, silicon, copper, silver, rhenium, and lead) to and the removal of two mineral commodities (arsenic and tellurium) from the LCM. By using an economic effects assessment, the results of this analysis provide a prioritization that can also be compared directly against other risk analyses and the cost of various risk mitigation strategies.

Open-File Report↗
USGS2026

The saline groundwater legacy of a large buried coastal paleo-estuary

Elevated groundwater salinity in coastal regions threatens the beneficial use of fresh groundwater. Coastal groundwater management typically focuses on preventing intrusion from modern sources of seawater; however, past geological processes can also leave a legacy of saline groundwater now hidden in the subsurface. Here, multiple extensive airborne electromagnetic surveys provide detailed evidence of residual salinity from a paleo-estuary filling a late Pleistocene incised valley impacting more than 10,000 km 2 that is now hidden beneath coastal Louisiana’s deltaic plain. Our results show that the three-dimensional pattern of saline groundwater beneath Louisiana mimics that of near-surface aquifers surrounding the modern Delaware Bay estuary, fingerprinting the signature of the past drowning of a large, incised valley of the Mississippi River following post-glacial sea-level rise. These findings demonstrate a new framework for understanding legacy sources of saltwater critical for managing stressed water resources along global coastlines.

Louisiana↗
USGS2025

Mine waste as a potential source of critical minerals and other commodities: Examples from the Four Corners states, USA

The growing demand for critical minerals and other mineral resources has raised concerns about possible supplies of these essential commodities. Mine waste is a potential source of these essential commodities. We compiled a geospatial database of publicly available data of the largest non-fuel mine waste features (>200,000 m 2 in areal extent) in the Four Corners states of the United States, where most of those features are from porphyry Cu deposits. The combined volume of those large porphyry Cu mine waste features is approximately 17 cubic kilometers, 60% of which is ore-related material such as tailings. Using publicly available data on density, grade, and previous recovery values, we estimate the contained endowments of Ag, As, Au, Bi, Cu, Mo, Re, S, Sb, Se, Te, and W. These estimates indicate endowments within ore-related mine wastes are collectively comparable to endowments of giant to supergiant deposits. If fully recovered, these commodities could meet current global demand from less than 1 year (Sb) to more than 200 years (Re), underscoring the enormous untapped resource potential of mine waste.

Arizona, Colorado, New Mexico, Utah↗
USGS1991

Effects of septic-tank effluent on ground-water quality in northern Williamson County and southern Davidson County, Tennessee

An investigation of the potential contamination of ground water from septic tank systems blasted in bedrock in Williamson and Davidson Counties, Tennessee, was conducted during 1988-89. Water samples were collected from domestic and observation wells, springs, and surface-water sites in a residential subdivision in the northern part of Williamson County near Nashville. The subdivision has a high density of septic-tank field lines installed into blasted bedrock Water samples also were collected from a well located in an area of Davidson County where field lines were installed in 5 feet of soil. Samples were analyzed for major inorganic constituents, nutrients, total organic carbon, optical brighteners, and bacteria. Although results of analyses of water samples from wells indicate no effect of septic-tank effluent on ground-water quality at these sites, water from two springs located downgradient from the subdivision had slightly larger concentrations of nitrite plus nitrate (2.2 and 2.7 milligrams per liter N), and much larger concentrations of fecal coliform and fecal streptococci bacteria (2,000 to 3,200 and 700 to 900 colonies per 100 milliliters of sample, respectively), than other wells and springs sampled during 1988. Water from one of these springs contained optical brighteners, which indicates that septic-tank effluent is affecting ground-water quality.

Tennessee↗
USGS2024

Geophysical characterization of mine influenced groundwater and surface water in the Mayflower section of the Animas River, Bonita Peak Mining District, Silverton Colorado

This report details findings from geophysical investigations to identify possible groundwater - surface water interactions near the Mayflower Section of the Animas River in Silverton, Colorado. The Mayflower Section is a mine influenced Superfund Site in Colorado. This investigation utilized electromagnetic induction (EM or EMI), magnetic, and fiber optic distributed temperature system (FODTS) geophysical methods to measure the bulk earth electrical conductivity, magnetic susceptibility, and temperature of specific surveyed volumes of the earth near the Mayflower Section of the Animas River. These physical parameters are used to understand the groundwater – surface water interactions, which can guide decision makers in their assessment of mine-impacted surface water. This report details the results from characterization and monitoring technologies to provide high data density and continuous monitoring of bulk earth electrical conductivity and temperature in the Mayflower section of the Animas River to identify zones of groundwater – surface water interactions and potential metal loading from mine influenced water. The investigation separated right and left bank characterization for each method and indicates more groundwater is entering from the right bank than the left bank and these predominantly right bank discharges potentially contain metal-rich water compared to the left bank. Results also indicate mineral veins facilitate preferential groundwater discharge to the river due to possible jointing, fractures, and permeability differences sometimes occurring along veins relative to host rock. For example, Boulder Gulch is likely groundwater dominated and may be receive water impacted by Mayflower Impoundments #1 and #2. Additionally, the beaver ponds near Blair Gulch may influence groundwater discharge and Mayflower Impoundment #4 is possibly impacting groundwater and surface water and may be connected to the wetlands to the west of the impoundment. These data could be further analyzed for smaller spatial scale analysis within areas of interest. The identification of these locations along sections of the river likely impacted by mine influenced groundwater potentially entering the Animas River and can be used by site investigators, decision makers, and stakeholders in mitigation decisions and strategies.

Colorado↗
USGS2023

Preliminary geologic map of the Southern Santa Rosa Mountains and Borrego Badlands, San Diego County, Southern California

This investigation delineates the geologic framework of an area of 75 square kilometers (km 2 ) located west of the Salton Sea in southern California (fig. 1, on sheet 1). The study area encompasses the south flank of the Santa Rosa Mountains and the eastern part of the Borrego Badlands (sheet 1). In this study area, regionally important stratigraphic and structural elements collectively inform the late Cenozoic geologic evolution of the Anza-Borrego sector of the Salton Trough province. Critical stratigraphic and structural elements in the map area include the following: The well exposed sequence of late Cenozoic, nonmarine sedimentary rocks that filled the Anza-Borrego subbasin (fig. 1) of the Salton Trough; A tectonic boundary that—in the southern Santa Rosa Mountains—separates the sedimentary strata from underlying crystalline rocks of Peninsular Ranges type. This tectonic boundary, named the West Salton Detachment Fault System by Axen and Fletcher (1998), is projected to underlie all late Cenozoic sedimentary strata in the Anza-Borrego subbasin of the Salton Trough; A variety of transpressional, transtensional, and strike-slip structures that have deformed the late Cenozoic sedimentary strata and collectively guided syntectonic and posttectonic depositional events within the Anza-Borrego subbasin of the Salton Trough; and The southeasternmost surface expression of the Clark Fault, a major strand of the dextral San Jacinto Fault Zone. Geologic mapping and analysis for this investigation focused on clarifying geologic relations among these four stratigraphic and structural aspects in the map area.

California↗
USGS2026

Bedrock geologic map of the Eagle Lake quadrangle, Essex County, New York

The bedrock geology of the 7.5-minute Eagle Lake quadrangle, Essex County, New York, consists of deformed and metamorphosed Mesoproterozoic gneisses of the Adirondack Highlands unconformably overlain by weakly deformed lower Paleozoic sedimentary rocks of the Champlain Valley. The Mesoproterozoic rocks occur on the eastern edge of the Adirondack Highlands and represent an extension of the Grenville Province of Laurentia. Granulite facies Mesoproterozoic paragneiss, marble, and amphibolite hosted the emplacement of an anorthosite-mangerite-charnockite-granite (AMCG) suite, now exposed mostly as orthogneiss, at approximately 1.18–1.15 giga-annum (Ga, billion years before present). The earliest of four phases of deformation (D1) predated AMCG magmatism and is characterized by gneissosity, rarely preserved F1 isoclinal folds, and migmatite in the paragneiss host rocks. A sample of hornblende quartz syenite from the AMCG suite, collected from an abandoned railroad cut on Old Furnace Road, yielded a U-Pb zircon age of 1,149±10 million years before present. D2 deformation produced a composite penetrative gneissosity, migmatite, and isoclinal F2 folds. Towards the end of D2, felsic magmatism (including the regionally extensive Lyon Mountain Granite Gneiss, abbreviated “LMG”) spread by penetrative migration as semiconcordant alkali feldspar granite sheets subparallel to S2 into the previously deformed lithologies. The LMG crystallized at approximately 1.15 to 1.14 Ga and displays synkinematic F2 folds thus constraining the time of D2 deformation. Exhumation of the Marcy anorthosite began during D3 along a mylonitic extensional detachment, as a type of core complex. Protracted D3 produced F3 folds exhibited in regional domes and basins, such as the Hammondville antiform, reactivation of the S2 foliation, partial melting, metamorphism, metasomatism, iron ore remobilization, and intrusion of magnetite-bearing pegmatite both as layer-parallel sills and crosscutting dikes. D4 created NE- and NW-trending boudinage, local high-grade ductile shear zones, and crosscutting granitic pegmatite dikes. Kilometer (km)-scale lineaments readily observed in lidar data are Ediacaran mafic dikes and Phanerozoic brittle faults. Lower Paleozoic rocks are part of the Early Cambrian to Late Ordovician great American carbonate bank on the ancient margin of Laurentia. The Potsdam Sandstone preserves the Cambrian stratigraphy in outliers above the Great Unconformity. The Paleozoic rocks are weakly folded and block faulted. Parts of the quadrangle are covered by undifferentiated glacial deposits, but much of the quadrangle contains only a variably thick, veneer of unmapped glacial till over significant areas of exposed bedrock. The map also shows waste rock piles and locations of historical mining operations. This study was undertaken to improve our understanding of the bedrock geology in the Adirondack Highlands, establish a modern framework for 1:24,000-scale bedrock geologic mapping in the Adirondack Mountains, and provide a modern context for historical mines. This Scientific Investigations Map of the Eagle Lake 7.5-minute quadrangle consists of a map sheet, an explanatory pamphlet, and a geographic information system database that includes bedrock geologic units, faults, outcrops, and structural geologic information. The map sheet includes a bedrock geologic map, a correlation of map units, a description of map units, an explanation of map symbols, and two cross sections. The explanatory pamphlet includes a discussion of the geology.

New York↗
USGS2025

Evolution of permeability and strength recovery of shear fracture under hydrothermal conditions

Geothermal energy is a clean and renewable resource that depends on the ability to move water through hot rock. In many locations, the ability to move water through rock requires the presence of extensive natural or human-made systems of fractures. However, these fracture systems are influenced by a variety of complex processes that occur at the temperature and pressure conditions found in geothermal reservoirs. To make geothermal systems more efficient, it is important to understand how these fractures evolve over time in response to these processes. This study explored how fractures in rock change under high-temperature and pressure conditions, like those found in geothermal reservoirs, through laboratory experiments and numerical simulations. In general fractures, tend to close due to pressure from the surrounding rock preventing the flow of water. One set of laboratory experiments revealed that fractures in granitic rock can weaken over time at elevated temperatures. These weak fractures can then slip slowly potentially keeping the fracture open for a longer period. This study also showed that at the highest temperature examined (250 °C) large differences between the chemical composition of the rock and the fluid moving through it could improve water flow temporarily likely due to the water dissolving parts of the rock. Flow rate predicted by models shows overall good agreement with the flow rate measured in our experiments but with some long time-scale variations that may be due to mechanical wear of the fracture surface. A second set of experiments found that, over the temperature range examined, the closure of fractures was caused by brittle failure driven by high stresses at points where fracture surfaces were in contact. This result suggests that fracture closure in geothermal reservoirs could be counteracted by maintaining high pore pressures. Additionally, we also tested a new method using electrical resistance to measure fracture closure in controlled systems with high precision.

Final Technical Report↗
USGS2025

Horizontal transport of Picture Gorge Basalt magma through the Monument Dike Swarm determined by magnetic fabric

Flood basalts of the mid-Miocene Columbia River Basalt Group (CRBG) cover 210,000 km 2 of Washington, Oregon, and Idaho. The source of CRBG melt is debated; widely spaced feeder dike swarms can be projected toward hypothetical sources near the Oregon-Idaho border. In this study, we use anisotropy of magnetic susceptibility (AMS) to track magma flow in the Monument dike swarm (MDS), the feeder dikes of the Picture Gorge Basalt (PGB). This small formation of the main-phase CRBG eruptions allows us to explore in detail the localized dynamics of a large igneous province feeder system, with implications for the larger CRBG picture. We measured the magnetic fabric of 205 oriented paleomagnetic specimens subsampled from 97 samples collected from 15 dikes of the MDS. Thermal demagnetization and hysteresis loops show that the magnetic minerals are a mixture of single domain and multidomain sized titanomagnetites. At three dikes, the paleodepth of sampling was determined to be shallow (<350 m). Magma flowing through dikes has been shown—in most cases— to acquire an anisotropic magnetic fabric with an AMS ellipsoid minimum axis perpendicular to the wall and maximum axis aligned in the direction of flow. Of 15 dikes, 12 show horizontal flow directions in the plane of the dike. Only one dike displayed imbricated fabrics, showing westward flow away from the Oregon-Idaho border. We conclude that magma flow in the MDS was sub-horizontal from a distal source.

Oregon↗
USGS2026

Controls on natural hydrogen generation during serpentinization of mantle rocks

Mantle rocks undergoing serpentinization can generate significant amounts of natural hydrogen, yet the rates and controlling processes remain poorly understood. Here, we constrain the possible hydrogen generation rates in two distinct mantle rock types, the fertile lherzolites of the Western Pyrenees and the depleted harzburgites of Northern California, to relatively low rates of ~0.1 to ~0.5 tonnes H₂ yr⁻¹ km⁻³ of reactive rock. When integrated over the full reactive volumes, this corresponds to total production rates of ~300 to ~600 tonnes H₂ yr⁻¹. By combining three-dimensional geophysical inversion with numerical modelling of fluid-rock processes, we show that hydrogen generation rates are mainly limited by H₂ saturation in the fluid and reaction kinetics. Under these constraints, hydrogen generation in mantle-derived serpentinization systems proceeds slowly, making rapid large-scale replenishment unlikely and suggesting that large, economically relevant accumulations, would require timescales of thousands to tens of thousands of years to develop.

northern California, western Pyrenees↗
USGS2026

Influence of new residential construction varying in housing density on bird species, human tolerance guilds, and communities

Human population growth and changing settlement patterns fuel the development of urban fringe lands worldwide, with implications for biodiversity. We conducted a 12-year study of birds in the fast-developing urban fringe lands of the central Puget Sound region, Washington, USA, to examine the effect of development configuration on birds. We hypothesized that lower-intensity conservation developments, compared to higher-intensity planned community developments, would benefit the overall bird community, as well as native forest birds (avoiders of human development) and avian generalist species (adapters to human development), but that higher-intensity planned community developments would benefit synanthropic species (exploiters of human development). We fit single-species and multi-species occupancy models to test these hypotheses. Consistent with our hypotheses, we found that a greater proportion of the overall community, avoiders, and adapters occupied lower-intensity conservation developments compared to higher-intensity planned community developments. However, we did not detect an effect of development type on the exploiter guild, and we found that species in the exploiter guild are variable in their response to the configuration of suburban developments. We also hypothesized that human tolerance guilds would be a useful predictor of individual species responses to development type. This hypothesis was somewhat supported: we found that, for avoiders, 87% of species in the guild had the same response to development type as the overall guild; for adapters, 63% had the same response as the overall guild, and for exploiters, only 44% had the same response as the overall guild. Our results indicate that the configuration of suburban developments can have a meaningful impact on bird communities, particularly on those species that are most sensitive to any level of development.

Washington↗
USGS1976

Corwin Springs Known Geothermal Resources Area, Park County, Montana

The Corwin Springs Known Geothermal Resources Area (KGRA) is contiguous to Yellowstone National Park along a part of the northern boundary of the park near Gardiner, Park County, Mont. The area contains two known sites of hot-spring activity--LaDuke Spring, 2.8 km southeast of the small resort community of Corwin Springs, and Bear Creek Spring, 2.6 km east of Gardiner. LaDuke Spring issues from brecciated quartzite and has a flow rate of 380 1/min, a surface water temperature of 65°C, a silica-geothermometer temperature of 68.7°C, and a Na-K-Ca geothermometer temperature of 76.8°C. Bear Creek Spring issues from limestone and has a flow rate of 4 1/min, a surface water temperature of 32°C, a silica temperature of 46.7°C, and a Na-K-Ca temperature of 87.2°C. The springs, which are actively depositing travertine, are on or near the trace of the Gardiner fault-a high-angle reverse fault which forms the southwestern boundary of the Beartooth uplift. Features that make the Corwin Springs KGRA potentially significant include: (1) Proximity of the Corwin Springs area to significant Pliocene and Pleistocene volcanism in Yellowstone National Park and related geothermal activity, (2) existence of a large potential geothermal reservoir in the northern extension of the Sepulcher Mountain graben, (3) localization of thermal activity along the Gardiner fault in the Corwin Springs area, (4) occurrence of negative gravity anomaly centered over the northern end of the Sepulcher Mountain graben, (5) existence of negative magnetic anomaly in the Corwin Springs area, (6) location of the area within the Intermountain seismic belt, (7) evidence of recent tectonism in the area, as demonstrated by Pleistocene and Holocene faulting, and (8) observed surface temperatures and estimated geochemical temperatures of the two known hot springs (features which do not indicate high subsurface temperatures).

Montana↗
USGS2025

Low-sulfidation epithermal deposits of the central Basin and Range Province, USA

The Basin and Range Province is host to many important low-sulfidation epithermal deposits. Within this broad zone of extension, epithermal deposits are hosted by specific areas of Miocene and younger bimodal volcanism. In northern Nevada, rifting and related volcanic activity occurred in response to thermal bulging during the development of the Yellowstone hotspot. The Colorado River Extensional Corridor in southern Nevada, adjoining eastern California and northwestern Arizona, is a major zone of Miocene crustal extension formed during the transformation of the western margin of North America from a convergent to a transform plate boundary. The style of mineralization in the low-sulfidation epithermal deposits in these areas is strongly controlled by the nature of the volcanic successions. Highgrade, low-tonnage deposits are commonly found in flow-dominated volcanic successions where ore deposition occurred through short-lived periods of fluid flashing. In contrast, low-grade, large-tonnage deposits are more commonly located in clastic-dominated successions where fluid infiltration of the permeable hosts and cooling predominated.

Arizona, California, Nevada, Oregon↗
USGS2025

Sensitivity of benthic biota and toxicity of cadmium, cobalt, copper, nickel, lead, and zinc mixtures in Washington, United States, and British Columbia, Canada

Relative sensitivities and responses of juvenile white sturgeon ( Acipenser transmontanus ), Hyalella azteca , two families of mayfly (Ephemerellidae, Heptageniidae), one family of caddisfly (Brachycentridae), and a natural community of benthic macroinvertebrates (BMI) to multiple metals are predicted using previously collected laboratory and field samples and a metal mixture model. Biological responses in single metal exposures are used to parameterize toxicity functions, which include accumulations of hydrogen and selected metals on biological receptors, intrinsic potencies of hydrogen and metals, sensitivities of organisms, and times of exposure. The model then is used to predict responses in multiple metal laboratory exposures and field-collected porewater. The following sensitivity sequence in porewater was determined based on endpoints of survival or total abundance: juvenile white sturgeon greater than (>) Ephemerellidae family > Hyalella azteca > Heptageniidae family about equal to (~) benthic macroinvertebrate community > Brachycentridae family. The fraction of porewater samples that are predicted to have adverse impacts on benthic biota (20-percent or greater negative response) depends on organism sensitivities and metal toxicities, and ranges from 44 to 48 percent for juvenile white sturgeon, 23 to 26 percent for the Ephemerellidae family, 16 to 22 percent for Hyalella azteca , 5 to 8 percent for the Heptageniidae family and BMI community, and 0 percent for the caddisfly family. The most toxic porewater in the upper Columbia River Basin (UCR) is at the backwater bar site at Deadmans Eddy and China Bend. The model also indicates that the element responsible for the most toxic conditions in UCR porewater is copper for all organisms, except Hyalella azteca and the metal-insensitive Brachycentridae family. Copper and lead result in the most toxic conditions for Hyalella azteca . This approach and results can aid in assessing metal toxicity and its potential risk to aquatic biota in ecosystems impacted by historical mining activities.

British Columbia, Washington↗
USGS2025

Geologic map of the Buckner 7.5-Minute quadrangle, Louisa County, Virginia

The Buckner 7.5-minute quadrangle straddles three terrane boundaries in the Piedmont Physiographic Province in central Virginia: the Chopawamsic terrane, the Elk Hill Complex, and the Goochland terrane. In much of the map area, the Elk Hill Complex separates the Chopawamsic and Goochland terranes. Rocks of the Chopawamsic terrane include Ordovician metavolcanic and metasedimentary rocks of the Chopawamsic Formation, Ordovician to Silurian granodiorite sheet intrusions, and Paleozoic mafic intrusions. Silurian to Devonian rocks of the Quantico Formation, mostly garnet-mica schist, crop out in the northwesternmost part of the map area, and are in unconformable contact with rocks of the Chopawamsic Formation on the southeastern limb of the Quantico synclinorium. The main map unit in the Elk Hill Complex is Neoproterozoic mica gneiss, which is in pre-metamorphic fault contact with rocks of the Chopawamsic Formation to the west. The main map unit of the Goochland terrane is the Maidens Gneiss. Except for Jurassic diabase dikes, all rocks on the Buckner 7.5-minute quadrangle were metamorphosed to amphibolite facies during the Alleghanian orogeny and preserve multiple compositional and phyllosilicate penetrative foliations. Evidence of amphibolite-facies metamorphism during the Taconic orogeny is preserved in rocks of the Elk Hill Complex. The entire width of the Maidens Gneiss on the Buckner 7.5-minute quadrangle is within the Spotsylvania high-strain zone and amphibolite-facies mylonitic textures are pervasive. Quartz veins and Jurassic diabase dikes crosscut all older rocks of the quadrangle. Multiple levels of terrace deposits are present along and near the major streams of the quadrangle. The lower terrace deposits are likely remnants of former positions of the Little River on the landscape, whereas higher deposits may be remnants of former deposits of the Atlantic Coastal Plain that covered this portion of the Piedmont Province. A linear cluster of aftershocks from the magnitude 5.8 earthquake that occurred near Mineral, Virginia, in 2011 defines the Fredericks Hall fault, which is at depth on the Buckner quadrangle. Most of the aftershocks occurred in the core of the Elk Creek antiform and have no relation to faults mapped at the surface. Several abandoned crushed stone and building stone quarries, as well as a mica prospect, exist in the quadrangle.

Virginia↗