USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Sea Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

480 records · Page 27Linked to original sources

Influence of inner-continental shelf geologic framework on the evolution and behavior of the barrier-island system between Fire Island Inlet and Shinnecock Inlet, Long Island, New York

High-resolution, sea-floor mapping techniques, including sidescan-sonar and subbottom profiling, were used to investigate how the geologic framework of the inner-continental shelf influenced the Holocene evolution and modern behavior of the Fire Island barrier-island system, Long Island, New York. The inner-continental shelf off Long Island is divided into two physiographic provinces by a broad outcrop of Cretaceous coastal-plain strata offshore of Watch Hill; this outcrop was part of a subaerial headland during the Holocene marine transgression. Erosion of the headland during transgression furnished sediment to the inner-continental shelf downdrift to the west. The sediment was, in turn, reworked by oceanographic processes into a series of shoreface-attached sand ridges. The oldest (~1200 yr BP) and most stable part of the barrier-island system is immediately landward of the outcropping coastal-plain strata and thickest sand ridges. East of Watch Hill, Pleistocene sediment either is exposed on the inner-continental shelf or is buried by a veneer of modern reworked sediment. Here the barrier-island system has migrated landward at a faster rate than the segment west of Watch Hill and has been breached by numerous historic inlets. Because the Pleistocene sedimentary deposit is generally of uniform thickness throughout the study area and unconformably overlies the Cretaceous coastal-plain strata, both the Holocene and historical evolution of the Fire Island barrier-island system are controlled by the physiography of this regional unconformity. In particular, the shoreface-connected sand ridges appear to be a significant source of sediment to the western portion of Fire Island. Previous attempts to develop a sediment budget for this coastal system have failed to explain volumetric discrepancies, primarily because poor assumptions were made about the nature of sediment transport in the system. A more realistic sediment budget must include a significantly larger spatial scale, including sediment input from the inner-continental shelf.

New York↗

Sources of global warming in upper ocean temperature during El Niño

Global average sea surface temperature (SST) from 40°S to 60°N fluctuates ±0.3°C on interannual period scales, with global warming (cooling) during El Niño (La Niña). About 90% of the global warming during El Niño occurs in the tropical global ocean from 20°S to 20°N, half because of large SST anomalies in the tropical Pacific associated with El Niño and the other half because of warm SST anomalies occurring over ∼80% of the tropical global ocean. From examination of National Centers for Environmental Prediction [ Kalnay et al. , 1996] and Comprehensive Ocean-Atmosphere Data Set [ Woodruff et al. , 1993] reanalyses, tropical global warming during El Niño is associated with higher troposphere moisture content and cloud cover, with reduced trade wind intensity occurring during the onset phase of El Niño. During this onset phase the tropical global average diabatic heat storage tendency in the layer above the main pycnocline is 1–3 W m −2 above normal. Its principal source is a reduction in the poleward Ekman heat flux out of the tropical ocean of 2–5 W m −2 . Subsequently, peak tropical global warming during El Niño is dissipated by an increase in the flux of latent heat to the troposphere of 2–5 W m −2 , with reduced shortwave and longwave radiative fluxes in response to increased cloud cover tending to cancel each other. In the extratropical global ocean the reduction in poleward Ekman heat flux out of the tropics during the onset of El Niño tends to be balanced by reduction in the flux of latent heat to the troposphere. Thus global warming and cooling during Earth's internal mode of interannual climate variability arise from fluctuations in the global hydrological balance, not the global radiation balance. Since it occurs in the absence of extraterrestrial and anthropogenic forcing, global warming on decadal, interdecadal, and centennial period scales may also occur in association with Earth's internal modes of climate variability on those scales.

Journal of Geophysical Research C: Oceans↗

Crustal structure of the Colorado Plateau, Arizona: Application of new long-offset seismic data analysis techniques

The Colorado Plateau is a large crustal block in the southwestern United States that has been raised intact nearly 2 km above sea level since Cretaceous marine sediments were deposited on its surface. Controversy exists concerning the thickness of the plateau crust and the source of its buoyancy. Interpretations of seismic data collected on the plateau vary as to whether the crust is closer to 40 or 50 km thick. A thick crust could support the observed topography of the Colorado Plateau isostatically, while a thinner crust would indicate the presence of an underlying low-density mantle. This paper reports results on long-offset seismic data collected during the 1989 segment of the U.S. Geological Survey Pacific to Arizona Crustal Experiment that extended from the Transition Zone into the Colorado Plateau in northwest Arizona. We apply two new methods to analyze long-offset data that employ finite difference travel time calculations: (1) a first-arrival time inverter to find upper crustal velocity structure and (2) a forward-modeling technique that allows the direct use of the inverted upper crustal solution in modeling secondary reflected arrivals. We find that the crustal thickness increases from 30 km beneath the metamorphic core complexes in the southern Basin and Range province to about 42 km beneath the northern Transition Zone and southern Colorado Plateau margin. We observe some crustal thinning (to ∼37 km thick) and slightly higher lower crustal velocities farther inboard; beneath the Kaibab uplift on the north rim of the Grand Canyon the crust thickens to a maximum of 48 km. We observe a nonuniform crustal thickness beneath the Colorado Plateau that varies by ∼15% and corresponds approximately to variations in topography with the thickest crust underlying the highest elevations. Crustal compositions (as inferred from seismic velocities) appear to be the same beneath the Colorado Plateau as those in the Basin and Range province to the southwest, implying that the plateau crust represents an unextended version of the Basin and Range. Some of the variability in crustal structure appears to correspond to preserved lithospheric discontinuities that date back to the Proterozoic Era.

Journal of Geophysical Research B: Solid Earth↗

Injection, transport, and deposition of tephra during event 5 at Redoubt Volcano, 23 March, 2009

Among the events of the 2009 eruption at Redoubt Volcano, Alaska, event 5 was the best documented by radar, satellite imagery, and deposit mapping. We use the new Eulerian tephra transport model Ash3d to simulate transport and deposition of event 5 tephra at distances up to 350 km. The eruption, which started at about 1230 UTC on 23 March, 2009, sent a plume from the vent elevation (estimated at 2.3 ± 0.1 km above sea level or a.s.l.) to about 16 ± 2 km above sea level in 5 min. The plume was a few kilometers higher than would be expected for the estimated average mass eruption rate and atmospheric conditions, possibly due to release of most of the eruptive mass in the first half of the 20-minute event. The eruption injected tephra into a wind field of high shear, with weak easterly winds below ~ 3 km elevation, strong southerly winds at 6–10 km and weak westerlies above ~ 16 km. Model simulations in this wind field predicted development of a northward-migrating inverted “v”-shaped cloud with a southwest-trending arm at a few kilometers elevation, which was not visible in IR satellite images due to cloud cover, and a southeast-trending arm at > 10 km elevation that was clearly visible. Simulations also predicted a deposit distribution that strongly depended on plume height: a plume height below 15 km predicted ash deposits that were located west of those mapped, whereas good agreement was reached with a modeled plume height of 15–18 km. Field sampling of the deposit found it to contain abundant tephra aggregates, which accelerated the removal of tephra from the atmosphere. We were able to reasonably approximate the effect of aggregation on the deposit mass distribution by two methods: (1) adjusting the grain-size distribution, taking the erupted mass < = 0.063 mm in diameter and distributing it evenly into bins of coarser size; and (2) moving 80–90% of the mass < = 0.063 mm into a single particle bin ranging in size from 0.25 to 1 mm. These methods produced an area inside the 100 g m − 2 isomass lines that was within a few tens of percent of mapped area; however they under-predicted deposit mass at very proximal (< 50 km) and very distal (> 250 km) locations. Modeled grain-size distributions at sample locations are also generally coarser than observed. The mismatch may result from a combination of limitations in field sampling, approximations inherent in the model, errors in the numerical wind field, and aggregation of particles larger than 0.063 mm.

Alaska↗

An ocean bottom seismometer study of shallow seismicity near the Mid- America Trench offshore Guatemala

Five ocean bottom seismometers recorded seismicity near the Mid-America Trench offshore Guatemala for 27 days in 1979. The array was emplaced in the lower slope region, just above the topographic trench, in the area investigated during Deep Sea Drilling Project legs 67 and 84. Approximately 170 events were recorded by three or more seismometers, and almost half were located with statistical hypocentral errors of less than 10 km. Most epicenters were located immediately landward of the trench axis, and many were further confined to a zone northwest of the array. In terms of depth, most events were located within the subducting Cocos plate rather than in the overlying plate or at the plate-plate boundary. Their apparent concentration in the lower crust and upper mantle may suggest that the upper crust does not have the strength to support earthquake-generating stresses. The data permit construction of a magnitude-duration scale, calibrated with m b magnitudes for events located by the World-Wide Standard Seismograph Network (WWSSN) and recorded by our array and by the network recording foreshocks and aftershocks of the 1979 Petatlan earthquake. Most magnitudes ranged between 3.0 and 4.0 m b , and the threshold magnitude of locatable events was about 2.8 m b . Two distinct composite focal mechanisms were determined. One appears to indicate high-angle reverse faulting in the subducting plate, in a plane parallel to trench axis strike. The other, constructed for some earthquakes in the zone northwest of the array, seems to show normal faulting along possible fault planes oriented quasi-perpendicular to the trench axis. The normal faulting is consistent with the segmentation of the Cocos plate that has been proposed from land evidence. Such segmentation might be evidenced offshore by normal faulting along planes subperpendicular to trench strike. Alternatively, the seismicity zone and associated normal faulting mechanism may be the subsurface expression of the tectonics responsible for the San Jose Canyon, a prominent submarine canyon located farther upslope. Finally, projection of our seismicity sample and of well-located WWSSN events from 1954 to 1980 onto a plane perpendicular to the trench axis shows a distinct gap between the shallow seismicity located by our array, and the deeper Wadati-Benioff zone seismicity located by the WWSSN. We tentatively ascribe this gap to inadequate sampling, but we suggest that it requires further investigation.

Journal of Geophysical Research Solid Earth↗

Analysis of geophysical well logs obtained in the State 2-14 borehole, Salton Sea geothermal area, California

A complete suite of conventional geophysical well logs was obtained in the upper part of a 3220-m- deep borehole drilled into geothermally altered alluvial sediments on the southeastern edge of the Salton Sea. In situ temperatures greater than 300°C and an inability to cool parts of the borehole by circulation limited the suite of logs run below 2000 m in depth to deep induction, spontaneous potential, un-calibrated neutron, natural gamma, and temperature. Bottom-hole temperature trends given by repeat temperature logs were extrapolated to undisturbed temperatures approaching 355°C at a depth of 3220 m. Geophysical logs obtained in the State 2–14 borehole indicate that neutron porosity, gamma-gamma, and deep-induction logs provide useful information on lithologic trends with depth. The natural gamma log contains almost continuous, high-frequency fluctuations that obscure lithologic trends and that may be related to recent radioisotope redistribution and departure from radiometric equilibrium. Acoustic transit time logs give unrealistically low in situ compressional velocities ranging from 1.8 to 3.0 km/s, whereas acoustic waveform logs indicate that sediment compressional velocities range from less than 3.0 km/s shallower than 1000 m in depth to almost 5.0 km/s at depths greater than 2000 m. Analyses indicate that most log values lie between two lithologic end points: an electrically conductive claystone with moderate neutron porosity, but no effective porosity, and an electrically nonconductive, fully cemented siltstone that has small but finite porosity. A limited number of clean sandstones depart from this trend; geophysical logs from these sandstones indicate an effective porosity ranging from 5 to 14%, and saturation with brines having equivalent NaCl concentrations greater than 100,000 mg/L. Depth- averaged trends in neutron porosity and deep-induction logs, along with trends in acoustic velocity determined from acoustic waveform logs, demonstrate that major changes in the properties of alluvial sediments occur within the depth range from 1200 to 1800 m. Although caliper logs were not obtained deeper than 2000 m, resistivity values less than 10 ohm m at those depths probably correspond to borehole enlargements in production zones rather than local increases in effective porosity. The transition in sediment properties indicated by the geophysical logs in the depth interval from 1200 to 2000 m apparently represents a detailed vertical profile of the transition from relatively unaltered clay minerals in alluvial sediments to electrically nonconductive alteration products such as epidote and feldspar.

Journal of Geophysical Research Solid Earth↗

Modification of wave-cut and faulting-controlled landforms

From a casual observation that the form of degraded fault scarps resembles the error function, this investigation proceeds through an elementary diffusion equation representation of landform evolution to the application of the resulting equations to the modern topography of scarplike landforms. The morphologic observations can be analyzed either in the form of one or more cross-strike elevation profiles or in the form of the slope-offset plot, a point plot of maximum scarp slope versus scarp offset. Working with either or both of these data representations for nine geologic structures, which range in age from 3 to 400 ka B.P. and in offset from 1 to 50 m, we apply analytical solutions for the vertical initial value scarp, the vertical continuous offset scarp, and the finite slope, initial value scarp. The model calculations are intrinsically ambiguous, yielding as the final answer only the product κ t (in the case of the initial value problem) or the product κ A −1 (in the case of the repeated faulting problem); here t is the age of a single scarp-forming event, 2 A is the vertical slip rate, and κ is the “mass diffusivity.” A single profile across three sea cliffs along the Santa Cruz, California, coast is analyzed as three separate initial value problems. A reasonably constrained age for the sea cliff standing above the Highway 1 platform returns κ = 11 GKG (1 GKG = 1 m 2 /ka). With this κ, we can date the two older sea cliffs. In fact, we do the converse: age estimates for these two older sea cliffs based on a uniform rate of uplift both yield the same κ as for the lower sea cliff. We treat a single profile of the Raymond fault in Pasadena/San Marino in terms of the repeated faulting problem; for it the uplift rate of R. Crook and others yields κ = 16 GKG. The very substantial preexisting offset across the Raymond fault must have been buried/leveled some 230 ka B.P., when the modern topography began to form. Our analysis of the Lake Bonneville shoreline scarps reveals a dependence of κ t on 2a, suggestive of nonlinear modification processes. This appearance is treated with the finite slope initial value scarp model to determine κ=1.1 GKG for the Lake Bonneville shoreline scarps. The suggestion of M. N. Machette that approximately 100,000-year-old, meter-high scarps are “unobservable” in weakly consolidated alluvial terranes of the Basin and Range and Rio Grande Rift Valley provinces can be formulated as κ ≳ 1 GKG. The coincidence between this inequality and the Lake Bonneville shoreline κ is striking, and it suggests that the value of κ = 1 GKG may be generally applicable, as a good first approximation, to the modification of alluvial terranes within the semiarid regions of the western United States. The Lake Bonneville shoreline κ is the basis for dating four sets of fault scarps in west-central Utah. The Drum Mountains fault scarps can be modeled in several different circumstances, but the most likely interpretation is that these fault scarps formed as the result of a single episode of normal faulting 3.6 to 5.7 ka B.P. The younger age is associated with quite low initial slope angles (25°). The other three sets of fault scarps show no evidence for finite initial value slopes. Fault scarps along the eastern base of the Fish Springs Range are very young, 3 ka B.P. We estimate the age of fault scarps along the western flank of the Oquirrh Mountains to be 32 ka B.P., which meets the weak geologic constraint that they be older than the Lake Bonneville shoreline. Fault scarps along the northeastern margin of the Sheeprock Mountains are even older, 53 ka B.P. An intriguing consequence of our single-event analysis of these scarps is that an 11.5-m offset occurred in a single earthquake.

Journal of Geophysical Research Solid Earth↗

Sea-floor environments within Long Island Sound: A regional overview

Modern sea-floor sedimentary environments within the glaciated, topographically complex Long Island Sound estuary have been interpreted and mapped from an extensive collection of sidescan sonographs, bottom samples, and video-camera observations together with supplemental bathymetric, marine-geologic, and bottom-current data. Four categories of environments are present that reflect the dominant long-term processes of erosion or nondeposition; coarsegrained bedload transport; sediment sorting and reworking; and fine-grained deposition. (1) Environments of erosion or nondeposition contain exposures of glacial drift, coarse lag deposits, and possibly bedrock and include sediments which range from boulder fields to gravelly coarse-to-medium sands. (2) Environments of coarse-grained bedload transport are mantled by sand ribbons and sand waves and contain mostly coarse-to-fine sands with only small amounts of mud. (3) Environments of sediment sorting and reworking comprise both uniform and heterogeneous sediment types and contain variable amounts of fine sand and mud. (4) Environments of fine-grained deposition are blanketed by muds and sandy muds. The patchy distribution of sedimentary environments within Long Island Sound reflects both regional and local changes in bottom processes. Regional changes are primarily the result of a strong, east-to-west decreasing gradient of bottom tidal-current speeds, coupled with the net (westward) estuarine bottom drift. The regional current regime has produced a westward succession of environments along the basin floor beginning with erosion or nondeposition at the narrow eastern entrance to the Sound, changing to an extensive area of coarse-grained bedload transport, passing into a contiguous band of sediment sorting, and ending with broad areas of fine-grained deposition in the central and western Sound. However, local changes in processes are superimposed on the regional conditions within the central and western parts of the basin and along the nearshore margins. Within the central and western basin, localized sedimentary environments are produced where the bottom flow is enhanced by, and interacts with, the bottom topography, whereas along the nearshore margins, they variously reflect wave-produced currents, the irregular bathymetry, the indented shoreline, and the proximal supply of sediments. Results from this study (1) confirm the high trapping efficiency of fine-grained sediments in the Sound, (2) suggest that fine-grained sediments accumulate at an average (regional) rate of 0.08 g/cm 2 /y , and (3) indicate that the postglacial delta in the eastern Sound was a significant source of fine-grained sediments now buried beneath depositional areas.

Connecticut, New York↗

India National Gas Hydrate Program Expedition-02: Operational and technical summary

The India National Gas Hydrate Program is being steered by the government of India's Ministry of Petroleum and Natural Gas (MoPNG) with participation of Directorate General of Hydrocarbons (DGH), Oil and Natural Gas Corporation Limited (ONGC), and the National Oil Companies and Research Institutes of India. The India National Gas Hydrate Program Expedition 01 (NGHP-01) established the presence of gas hydrate in the Krishna Godavari (KG) and Mahanadi Basins and in the offshore area of the Andaman Sea Basin. However, the gas hydrates discovered during NGHP-01 were mainly distributed as fracture-filling material in fine-grained clay-rich sediments. The India National Gas Hydrate Program Expedition 02 (NGHP-02) was carried out with an objective to discover gas hydrate in sand-rich sediment along the eastern offshore margin of India. ONGC planned and executed NGHP-02 on the behalf of the MoPNG. NGHP-02 started on March 3, 2015 and was completed on July 28, 2015 (total 147 days) using the Japanese scientific Drilling Vessel Chikyu (D/V Chikyu). During NGHP-02, 42 holes at 25 sites were drilled, cored, and/or surveyed with downhole logging tools. These sites were located in four areas along the eastern margin of India and formally named Area A (Mahanadi Basin, three sites), Area B (northern part of the KG-Basin, twelve sites), Area C (central part of the KG-Basin, six sites), and Area E (southern part to the KG-Basin, four sites). All 25 sites established during NGHP-02 were first drilled and logged with logging-while-drilling (LWD) tools and an additional 17 holes were then drilled and/or cored with conventional coring tools (HPCS/ESCS) or pressure coring tools (PCTB). Wireline logging was conducted in 10 holes and formation tests using a dual packer Modular Formation Dynamics Tester (MDT) tool were carried out in two holes. The onboard science team used the laboratory facilities on the D/V Chikyu to examine and analyse the physical properties, geochemistry, and sedimentology of all the cores collected during the expedition. Core samples were also analysed in additional post-expedition shore-based studies conducted in numerous domestic and international gas hydrate research laboratories. The NGHP-02 sediment cores were archived at the National Gas Hydrate Core Repository in Mumbai (India), which is associated with the ONGC Gas Hydrate Research and Technology Centre (GHRTC). The necessary data for characterizing the occurrence of gas hydrate, such as interstitial water chlorinities, core-derived gas chemistry, physical and sedimentological properties, thermal images of the recovered cores, pressure core and downhole measured logging data (LWD and/or conventional wireline log data), were obtained from most of the drill sites established during NGHP-02. Almost all the drill sites yielded evidence for the occurrence of gas hydrate; however, the inferred in situ concentration of gas hydrate varied substantially from site to site. For the most part, the interpretation of downhole logging data, core thermal images, interstitial water analyses, and pressure core images from the sites established during NGHP-02 indicate that the occurrence of concentrated gas hydrate is mostly associated with coarser grained (sand-rich) sediments. This paper presents the operational and technical summary of NGHP-02. NGHP-02 started on March 3, 2015 and was completed on July 28, 2015 (total 147 days) using the Japanese scientific Drilling Vessel Chikyu (D/V Chikyu). During NGHP-02, 42 holes at 25 sites were drilled, cored, and/or surveyed with downhole logging tools. These sites were located in four areas along the eastern margin of India and formally named Area A (Mahanadi Basin, three sites), Area B (northern part of the KG-Basin, twelve sites), Area C (central part of the KG-Basin, six sites), and Area E (southern part to the KG-Basin, four sites). All 25 sites established during NGHP-02 were first drilled and logged with logging-while-drilling (LWD) to

Journal of Marine and Petroleum Geology↗

Morphology and growth history of Delgada Fan: Implications for the Neogene evolution of Point Arena Basin and the Mendocino Triple Junction

Long-range side scan (GLORIA) sonographs and seismic reflection data acquired during a survey of the western U.S. Exclusive Economic Zone in 1984, coupled with information from Deep Sea Drilling Project sites, provide new insights into the growth and evolution of the Delgada Fan. Construction of the fan commenced in the latest Miocene (∼6 Ma) following the filling of the Neogene Point Arena Basin. The fan presently covers more than 50×10 3 km 2 of the Pacific plate and contains approximately 15×10 3 km 3 of predominantly terrigenous detritus. The large size of the fan is incompatible with the small present-day supply of sediment to the canyon system. The GLORIA data show the Delgada Fan to be a hybrid-type fan, exhibiting characteristics of both elongate and radial fans. The morphology and volume of the fan, along with evidence for a decline in accumulation rates on the lower fan during the Quaternary period, suggest that the fan experienced an early growth phase (latest Miocene and Pliocene) characterized by relatively rapid progradation of elongate fan lobes followed by a period (Quaternary) of slower growth that has featured a shift of depocenters to sites closer to the canyons and a transition to distributary channels bordered by less prominent levees and overbank deposits. We examine the growth of Delgada Fan in relation to the Neogene evolution of the North American-Pacific plate boundary using a series of paleogeographic reconstructions based on recently published time displacement histories of the Mendocino triple junction (MTJ), the San Andreas fault (SAF), and the Pacific plate, upon which the fan rests. The time displacement curves for the SAF and the MTJ suggest that the MTJ and Mendocino Fracture Zone overtook and passed Point Arena Basin at about 10 Ma when the basin lay immediately southwest of the present San Francisco Bay area. We suggest that the MTJ joined the SAF at approximately that time and location, thus making the SAF the master fault in the transform system. This interpretation is compatible with evidence from seismic reflection profiles over the fan, which demonstrate that the fan and the canyon system and therefore Point Arena Basin have moved as a unit since the inception of fan growth (∼6–7 Ma). Point Arena Basin lay southwest of the San Francisco area at 10–12 Ma, and the passage of the MTJ caused the disruption of the forearc shelf and slope and the development of local uplifted and subsiding blocks. In particular, uplift of the “bay block” immediately east of the SAF may have provided the source area for the late Miocene sediments that filled Point Arena Basin and set the stage for the growth of Delgada Canyon and Fan system. The growth rate of the fan has decreased, and the style of deposition has changed as the system was tectonically transported to its present location adjacent to the small youthful drainages of the King Range.

Journal of Geophysical Research Solid Earth↗

The M2 tide on the Amazon Shelf

As part of A Multidisciplinary Amazon Shelf Sediment Study (AMASSEDS), moored and shipboard current measurements made over the Amazon shelf during 1990–1991 have been analyzed to determine the dominant semidiurnal tidal constituent, the M 2 . These results have been combined with coastal sea level data from within the Amazon and Para Rivers, the adjacent shelf, and with satellite‐derived tidal elevation data from off the shelf to provide a more complete description of the M 2 tide in this complex river/shelf system. Near the Amazon River mouth the M 2 tide propagates across the shelf and through the mouth as a damped progressive wave, with its amplitude decreasing and phase increasing upriver. Over the adjacent shelf north of Cabo Norte, the M 2 tide approaches a damped standing wave, with large amplitudes (greater than 1.5 m) near the coast due to near resonance within the coastal embayment formed by the Cabo Norte shoal to the south and Cabo Cassipore to the north. The observed M 2 tidal currents are nearly rectilinear and oriented primarily across the local isobaths. Comparisons between tidal observations in both the North Channel and the Cabo Norte‐Cabo Cassipore embayment and a simple variable‐width channel tidal model indicate that (1) most of the M 2 tidal energy dissipation occurs over the mid‐ and inner shelf (in water depths less than 20 m) and (2) fluid muds found there cause a significant reduction (of order 50%) in the effective bottom friction felt by the M 2 tide. The approximate resonant period of the Cabo Norte‐Cabo Cassipore embayment is 11.9 hours, and at resonance the average energy dissipation per forcing period is roughly 2.2 times the average mechanical energy in the embayment. This damping rate is large enough that the tidal amplification is rather insensitive to forcing frequency, so that the response of the embayment to forcing over the semidiurnal band should be essentially the same. The vertical structure of the M 2 tidal current is examined at one outer shelf site located in 65‐m water depth. The observed semimajor axis increases logarithmically with height above bottom within the lowest 1–2 m and reaches a maximum in excess of 0.5 m/s at approximately 11 m above bottom. The mean ellipticity is small (less than 0.1) and positive, indicating clockwise rotation of a nearly rectilinear current, and the semimajor axis is oriented within 10° of the local cross‐isobath direction. The M 2 phase increases with height above bottom, with flood at the bottom leading flood at the surface by about 1 hour. A simple, local homogeneous tidal model with time‐ and space‐dependent eddy viscosity simulates the observed near‐bottom velocity reasonably well, however, the model suggests that stratification above the lowest few meters may significantly affect the tidal boundary layer structure at this site. The M 2 energy flux onto the Amazon shelf and into the Amazon and Para Rivers has been estimated using current and surface elevation data and the best fit variable‐width channel model results. The net M 2 energy flux into the mouths of the Amazon and Para Rivers is 0.47×10 10 W and 0.19×10 10 W, respectively. A net M 2 energy flux of about 3.3×10 10 W occurs onto the shelf between the North Channel of the Amazon River and Cabo Cassipore. This stretch of the Amazon shelf accounts for about 1.3% of the global dissipation of the M 2 tide.

Journal of Geophysical Research C: Oceans↗

The nature of the crust in the Yukon-Koyukuk province as inferred from the chemical and isotopic composition of five Late Cretaceous to Early Tertiary volcanic fields in western Alaska

Late Cretaceous and early Tertiary volcanic and plutonic rocks in western Alaska comprise a vast magmatic province extending from the Alaska Range north to the Arctic Circle, south to Bristol Bay, and west to the Bering Sea Shelf. The chemical and isotopic composition of five of these Late Cretaceous to early Tertiary volcanic fields in the north central part of this province were studied to determine if Paleozoic or older continental crust underlies the Yukon-Koyukuk province. Three of the fields, the Blackburn Hills, Yukon River, and Kanuti, occur within the Yukon-Koyukuk province and two, the Sischu and Nowitna, overlie bordering Precambrian and Paleozoic metamorphic terranes to the southeast. High initial 87 Sr/ 86 Sr of 0.7075–0.7079 and moderate initial 143 Nd/ 144 Nd of 0.51244–0.51247 of rhyolite, dacite, and high-silica andesite of the Sischu volcanic field indicate that the magmas have interacted with the underlying Paleozoic or older continental crust. The relatively limited variation of isotopic (initial 87 Sr/ 86 Sr = 0.7044–0.7051; initial 143 Nd/ 144 Nd = 0.51256–0.51257) and elemental compositions of andesites from the Nowitna field can be accounted for by assimilation of small amounts of Paleozoic or older continental crust during crystal fractionation of andesite parent magmas at crustal levels. The Blackburn Hills field, which consists of medium-K basalt, andesite, and rhyolite intruded by a small granitic pluton, has a large range in initial 87 Sr/ 86 Sr and initial 143 Nd/ 144 Nd that plot in the field for 60 Ma mantle, from near mid-ocean ridge basalts to near “bulk-earth” compositions (initial 87 Sr/ 86 Sr = 0.7033–0.7052; initial 143 Nd/ 144 Nd = 0.51253–0.51290). Andesites and basalts from the Blackburn Hills are divided into two group on the basis of rare earth element (REE) and isotopic composition. Isotopic variation in the more primitive group 1 is best explained by assimilation of the lower crust of the Jurassic to Early Cretaceous Koyukuk terrane by mantle-derived basalts during crystal fractionation, though part of the isotopic variation may be due to metasomatism of an oceanic island basalt type mantle source by fluids derived from subducted sediments. Group 2 andesites from the Blackburn Hills have lower heavy REE abundances and more enriched isotopic compositions. These group 2 andesites and dacites from the Kanuti field, which have ( 87 Sr/ 86 Sr) i = 0.7043–0.7048 and ( 143 Nd/ 144 Nd) i = 0.51248–0.51267, appear to have formed by partial melting of the lower crust of the Koyukuk terrane. The Yukon River field consists of basalt, andesite, dacite, and rhyolite having ( 87 Sr/ 86 Sr) i = 0.7037–0.7051 and ( 143 Nd/ 144 Nd) i = 0.51266–0.51280; its isotopic composition does not require the presence of Paleozoic or older continental crust under the volcanic field and may have formed by interaction between mantle-derived melts and the oceanic Angayucham/Tozitna or island arc Koyukuk terrane. Most of the intrusive rocks and rhyolite domes from the Blackburn Hills volcanic field have ( 87 Sr/ 86 Sr) i = 0.7038–0.7041 and dacites from the Kanuti volcanic field have ( 87 Sr/ 86 Sr) i = 0.7043–0.7048. Thus little or no old continental crust was involved in the genesis of the Late Cretaceous and early Tertiary rocks and therefore probably does not extend beneath this part of the Yukon-Koyukuk province. However, the ultimate source of the small volumes of enriched shoshonitic andesite ( 87 Sr/ 86 Sr = 0.7075, 143 Nd/ 144 Nd = 0.5125) erupted at 118 Ma in the Yukon-Koyukuk province may be continental lithosphere, which may have been thrust under this part of the Yukon-Koyukuk province during arc-continent collision in the Early Cretaceous.

Journal of Geophysical Research Solid Earth↗