USGS Science⌕ Search

SEARCH · USGS Science

Results for “ICES Journal of Marine Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,661 records · Page 27Linked to original sources
USGS2026

Preliminary geology of the North Meadow Creek Area, Tobacco Root Mountains, southwest Montana: The North Meadow Creek Fault

This report documents a previously unmapped fault, informally referred to herein as the North Meadow Creek fault, on the east flank of the Tobacco Mountains of southwestern Montana. This fault has an apparently long and complex history, including Quaternary offset of an older alluvial terrace, offset of a debris flow of presumed Pleistocene age, offset of rhyolite lava flows of presumed Tertiary age from their presumed source several kilometers east, on the opposite side of the fault, and offset and possible rotation of blocks of Archean gneiss on northeast side of the fault. The western part of the fault is covered by glacial moraines of two apparent ages, both Pleistocene.

Montana↗
USGS2026

Rupture into slow-slip fault regime during the 2018 Mw 6.9 Island of Hawaiʻi earthquake is followed by modest postseismic slip

On 4 May 2018, a M w 6.9 earthquake occurred on the south flank of Kīlauea, in the midst of an historic event that included a voluminous eruption from Kīlauea’s lower East Rift zone and caldera collapse at its summit. The earthquake was a consequence of both short‐ and long‐term stress buildup due to magmatic activity associated with the eruption and steady flank motion, respectively, and it revealed features of Kīlauea’s décollement fault that can inform understanding of future earthquake activity. We used geodetic data to determine the distributions of slip during the coseismic and postseismic periods and compared these with areas of known fault slip during past earthquakes and slow‐slip events (SSEs). The 2018 earthquake ruptured into an area of the décollement fault that was active during quasi‐regular SSEs that occurred in the two decades prior to 2018 but that have not been observed since. The coseismic slip model indicates that the amount of motion on the décollement fault was several times greater than what typically occurred during SSEs, suggesting that it may take decades for the fault to rebuild stress to the point at which SSEs will occur again. Postseismic afterslip also occurred in an area of the fault known to experience slow slip; however, unlike at other creeping faults, postseismic afterslip was rapid, being largely over within 2–3 days. The rapid nature and small magnitude of the postseismic afterslip may be due to the lack of a viscoelastic relaxation component, which is possibly a result of the shallow dip of the décollement fault not transferring stress efficiently into the lower crust.

Hawaii↗
USGS2025

Application of Hydrologic Simulation Program—FORTRAN (HSPF) as part of an integrated hydrologic model for the Salinas Valley, California

The U.S. Geological Survey (USGS), in cooperation with the Monterey County Water Resources Agency, conducted studies to help evaluate the surface-water and groundwater resources of the Salinas Valley study area, consisting of the entire Salinas River watershed and several smaller, adjacent coastal watersheds draining into Monterey Bay. The Salinas Valley study area is a highly productive agricultural region that depends on the coordinated use of surface water and groundwater to meet demand for irrigation and public water supply. To continue to meet these demands, a better understanding of the historical water balance and the effects of water-resource development on the long-term sustainability of water resources in the Salinas Valley study area is needed.

California↗
USGS2025

Assessment of density pattern retention of generalized data for 1:100,000-scale United States topographic maps

Cartographic generalization reduces the complexity of geographic data to produce legible, smaller-scale displays that retain essential information and logical geographic patterns. Generalization is a vital process in topographic map production. An important challenge in this process is managing and evaluating consistency across scale in the density and spatial distribution of map features such as buildings, roads, streams, water bodies, and elevation contours. Density patterns in these features reflect underlying physiographic conditions, which include factors such as bedrock geology, tectonics, climate, and landforms. Assessments of an acceptable level of change in feature density patterns are critical to ensuring the readability, usability, and accuracy of generalized maps and data. Preserving realistic density patterns across mapping scales also supports sustainable development goals in cartography, by helping to prioritize and communicate the relative reliability of geospatial data at specific scales.

Conference Paper↗
USGS2024

Extending the Boore and Abrahamson (2023) modified square-root-impedance method for the development of site amplifications consistent with the full-resonance approach to a range of VS30 values

The square-root-impedance (SRI) method is commonly used to approximate the seismic site amplifications computed using the full-resonance (FR) method for gradient shear-wave velocity ( V S ) profiles that are smoothly varying with depth. The SRI site amplifications have been observed to systematically underpredict the FR site amplifications by a ratio of FR/SRI amplifications around 1.05 to 1.3 across a wide frequency range (Boore, 2013). Recently, Boore and Abrahamson (2023; hereafter, BA23) related this difference in the SRI and FR methods to differences in the exponent η of the ratio of seismic impedances between the two methods. They proposed the implementation of a modified frequency-dependent η in the SRI method to improve its match to the FR site amplifications. This modified η was derived using only five V S profiles. We investigate the performance of the BA23 η for a wide range of realistic gradient V S profiles with V S30 ranging from 180 to 1500 m/s. These gradient V S profiles are constructed using two power-law functions of depth and are constrained by the assigned VS30 value, the depth and velocity of the half-space, and depths to shear-wave velocity horizons of 1.0 and 2.5 km/s ( Z 1.0 and Z 2.5 ) based on western United States sites. Despite observing a V S30 dependence of η, we find that the BA23 η generally works reasonably well for the range of V S profiles analyzed. Using the VS30 -dependent η derived in this study results in improvements in matching the FR site amplification compared to using the BA23 η. These improvements are more pronounced for the soft-site conditions and become modest to negligible for the stiff site conditions

Bulletin of the Seismological Society of America↗
USGS2026

Utilization of multiple geochronology techniques to constrain the age of laterization and mineralization of the world-class Mount Weld rare earth element deposit, Western Australia

Pervasive chemical weathering on stable cratons may form thick regoliths and elemental enrichment, but constraining the age of regolith formation is challenging. In this study we utilize multiple geochronological techniques on different minerals from the world-class Mount Weld rare earth element (REE) deposit, formed by lateritic weathering of a carbonatite, to constrain the age of formation and provide insight into landscape evolution. The oldest dates, ca. 100 to 38 Ma, are from Lu-Hf dating of churchite [HREE(PO 4 )·2(H 2 O)], a heavy REE phosphate mineral. Growth bands on individual minerals show a younging outwards. 40 Ar/ 39 Ar geochronology of cryptomelane [K(Mn 4+ ,Mn 2+ )₈O₁₆] yielded dates from ca. 40 to 27 Ma. Similarly, (U-Th)/He geochronology of goethite [FeO(OH)] yielded dates ranging from ca. 45 to 19 Ma. Integrating results into regional constraints, suggests 1) churchite formed by mineral saturation in a karst-like setting below the water table from ca. 100 to 40 Ma, 2) with minor uplift and erosion, cryptomelane and goethite formed at or near the water table between ca. 45 and 19 Ma, 3) after ca. 15 to 10 Ma chemical weathering within the profile had ended. Other studies document that the region experienced minimal uplift and a wet, warm climate from ca. 100 Ma to 15 Ma. These conditions and the high carbonate content of the carbonatite promote extensive chemical weathering, a deep weathering profile, and the preservation of the weathered section. This study highlights the use of multiple geochronological techniques utilizing different minerals to provide insight into how laterites form and to constrain the timing and history of the formation of this important mineral deposit.

Western Australia↗
USGS2025

Special issue "Effects of surface geology on seismic motion (ESG): General state-of-research"

To understand and predict the behaviors of strong ground motions incurred during devastating earthquakes, studies focused on the “effects of surface geology (ESG) on seismic motions” (following tradition, herein contracted as: “ESG”) have progressed steadily in the last three decades. These ESG studies typically involve in situ measurements of the wavefield and commonly apply both analytical and computational approaches. Concurrently, improvements in ESG related research can be readily attributed to the proliferation of openly accessible strong motion data, as well as advances in computational power. Nevertheless, there remain significant shortfalls in our understanding of the epistemic and aleatory uncertainties associated with the ESG as demonstrated by phenomena from recent deadly earthquake-related site effects. Thus, investigations toward addressing these deficiencies should be underscored in future earthquake related disaster mitigation efforts. This special issue of Earth, Planets, and Space (EPS) is dedicated to the ongoing efforts by the International Association of Seismology and Physics of the Earth’s Interior (IASPEI) and the International Association of Earthquake Engineering (IAEE) that champion activities promoting studies related to the ESG.

Earth, Planets and Space↗
USGS2025

Hydrogeologic framework and considerations for drilling and grouting of closed-loop geothermal bores in the Erie-Ontario Lowlands and Allegheny Plateau of New York State

The hydrogeologic framework at closed-loop geothermal sites in the Erie-Ontario Lowlands and Allegheny Plateau of central and western New York is the result of the complex interaction of bedrock geology, glacial geology, and groundwater hydrology, and the occurrence of petroleum and gas. Considerations for closed-loop geothermal bore installation include the thickness and character of glacial deposits, bedrock solubility and depth to competent rock, karst development, the distribution of highly permeable zones and their hydraulic heads, and the presence of saline water, gas, and oil. The hydrogeology of the Erie-Ontario Lowlands and Allegheny Plateau poses challenges to closed-loop geothermal bore drilling and casing; managing drill cuttings, discharge water, and gas; and grouting. The potential to encounter severe challenges typically increases with bore depth. This report highlights hydrogeologic considerations for closed-loop geothermal bore installation in New York’s Erie-Ontario Lowlands and Allegheny Plateau to help guide the efficient and safe development of geothermal resources in the regions.

New York↗
USGS2024

Evaluation of an open earthquake early warning system in Mexico, and laboratory tests of their sensors

Microelectromechanical system (MEMS) accelerometers are useful for seismological and engineering applications because of their ability to record unsaturated large seismic signals. Recent advances in MEMS technologies enable the design of instruments with improved capabilities that also allow the recording of small signals. As a result, MEMS can be useful across a broad dynamic range and for both major earthquakes and smaller magnitude events. Here, we analyze the performance of a MEMS‐based accelerometer with the capability of real‐time data transmission. We discuss the self‐noise level, dynamic range, and sensitivity, along with the timing precision and data transmission latency, and compare these parameters to other MEMS‐based instruments. We also summarize observations from a regional network deployed in southern Mexico over a period of 3+ yr for the purpose of earthquake early warning. In addition to the sensor evaluation, we present a large, openly available data set of strong motion data from the Mexican network that comprises continuous ground‐motion records from 24 accelerometers in the period between 2017 and 2022.

Seismological Research Letters↗
USGS1986

Regionalization of low-flow characteristics of Tennessee streams

Procedures for estimating 3-day 2-year, 3-day 10-year, 3-day 20-year, and 7-day 10-year low flows at ungaged stream sites in Tennessee are based on surface geology and drainage area size. One set of equations applies to west Tennessee streams, and another set applies to central and east Tennessee streams. The equations do not apply to streams where flow is significantly altered by activities of man. Standard errors of estimate of equations for west Tennessee are 24 to 32% and for central and east Tennessee 31 to 35%. Streamflow recession indexes, in days/log cycle, are used to account for effects of geology of the drainage basin on low flow of streams. The indexes in Tennessee range from 32 days/log cycle for clay and shale to 350 days/log cycle for gravel and sand, indicating different aquifer characteristics of the geologic units that sustain streamflows during periods of no surface runoff. Streamflow recession rate depends primarily on transmissivity and storage characteristics of the aquifers, and the average distance from stream channels to basin divides. Geology and drainage basin size are the most significant variables affecting low flow in Tennessee streams according to regression analyses. (Author 's abstract)

Tennessee↗
USGS2024

Beyond the wedge: Impact of tidal streams on salinization of groundwater in a coastal aquifer stressed by pumping and sea-level rise

Saltwater intrusion (SWI) is a well-studied phenomenon that threatens the freshwater supplies of coastal communities around the world. The development and advancement of numerical models has led to improved assessment of the risk of salinization. However, these studies often fail to include the impact of surface waters as potential sources of aquifer salinity and how they may impact SWI. Based on field-collected data, we developed a regional, variable-density groundwater model using SEAWAT for east Dover, Delaware. In this location, major users of groundwater from the surficial aquifer are the City of Dover and irrigation for agriculture. Our model includes salinized marshland and tidal streams, along with irrigation and municipal pumping wells. Model scenarios were run for 100 years and included changes in pumping rates and sea-level rise (SLR). We examined how these drivers of SWI affect the extent and location of salinization in the surficial aquifer by evaluating differences in chloride concentration near surface waters and the subsurface freshwater-saltwater interface. We found the presence of the marsh inverts the typical freshwater-saltwater wedge interface and that the edge of the interface did not migrate farther inland. Additionally, we found that tidal streams are the dominant pathways of SWI at our site with salinization from streams being exacerbated by SLR. Our results also show that spatial distribution of pumping affects both the magnitude and extent of salinization, with an increase in concentrated pumping leading to more intensive salinization than a more widely distributed increase of the same total pumping volume.

Delaware↗
USGS2025

A crosswalk of the 2015 World Terrestrial Ecosystems to the International Union for the Conservation of Nature Global Ecosystem Typology Framework

To support ecosystem mapping and accounting applications, we aligned the 2015 U.S. Geological Survey/Esri/The Nature Conservancy-World Terrestrial Ecosystems (WTEs) with the International Union for Conservation of Nature Global Ecosystem Typology (GET) framework. This process, known as “crosswalking,” enabled the development of a global map of GET level 3 Ecosystem Functional Groups (EFGs) at a 250-meter spatial resolution. Crosswalking involved manually assigning 1,781 biogeographically stratified WTEs to their most probable EFG based on similarities in climate, terrain, vegetation, and geographic distribution. We compared attributes of the WTE dataset with summary characteristics of the EFGs. The resulting crosswalked global map of International Union for Conservation of Nature GET ecosystems is intended to be useful for standardizing ecosystem classification and reporting under frameworks such as the Kunming-Montreal Global Biodiversity Framework and the United Nations System of Environmental-Economic Accounting. We discuss key challenges in reconciling non-identical classifications, such as many-to-one relationships and variation in data quality.

Open-File Report↗
USGS2025

Paleomagnetic correlation of surface and subsurface basalt flows in the central and southwestern part of the Idaho National Laboratory, Idaho

The U.S. Geological Survey, in cooperation with the U.S. Department of Energy, used paleomagnetic data from 22 coreholes to construct 3 fence diagrams of subsurface basalt flows in the southern part of the Idaho National Laboratory. These diagrams provide comprehensive descriptions of the horizontal and vertical distribution of basalt flows and sediment layers beneath the surface, aiding geological studies and contributing valuable data to numerical models of groundwater flow and contaminant transport. The correlations established though these diagrams include spatial correlations between basalt flows found in multiple coreholes. Correlations were identified by matching average paleomagnetic inclinations and confirming or denying these correlations using petrology, geochemistry and radiometric ages. The fence diagrams aid in identifying potential locations of subsurface vents, volcanic vents that have been buried by more recent volcanic activity, associated to subsurface basalt flows. By tracing the subsurface flows and analyzing where the greatest thickness occurs, the locations of buried vents can be inferred. Some subsurface flows exhibit correlations across several coreholes and may indicate yet unidentified surface or buried vents, thereby enhancing our understanding of the volcanic history and subsurface geology of the region.

Idaho↗
USGS2000

Assessment of potential for natural attenuation of chlorinated ethenes and ethanes in ground water at a petrochemical reclamation site, Harris County, Texas

Redox conditions in the Numerous Sand Channels Zone beneath a petrochemical reclamation site in Harris County, Texas, range from sulfate reducing to methanogenic as indicated by the presence of methane in ground water and the range of molecular hydrogen concentrations. Assessment of the potential for reductive dechlorination using BIOCHLOR as a screening tool indicated conditions favoring anaerobic degradation of chlorinated organic compounds in the Numerous Sand Channels Zone. Evidence supporting reductive dechlorination includes apparently biogenic cis -1,2-dichloroethene; an increased ratio of 1,2-dichloroethane to 1,1,2-trichloroethane downgradient from the assumed contaminant source area; ethene and methane concentrations greater than background concentrations within the area of the contaminant plume; and a positive correlation of the ratio of ethene to vinyl chloride as a function of methane concentrations. The body of evidence presented in this report argues for hydrogenolysis of trichloroethene to cis -1,2-dichloroethene; of 1,1,2-trichloroethane to 1,2-dichloroethane; and of vinyl chloride to ethene within the Numerous Sand Channels Zone. Simulations using BIOCHLOR yielded apparent first-order decay constants for reductive dechlorination in the sequence tetrachloroethene trichloroethene cis -1,2-dichloroethene vinyl chloride ethene within the range of literature values reported for each compound and apparent first-order decay constants for reductive dechlorination in the sequence 1,1,2-trichloroethane 1,2-dichloroethane slightly greater than literature values reported for each compound along the upgradient segment of a simulated ground-water flowpath. Except for vinyl chloride, apparent rates of reductive dechlorination for all simulated species show a marked decrease along the downgradient segment of the simulated ground-water flowpath. Evidence for reductive dechlorination of chlorinated ethenes within the Numerous Sand Channels Zone indicates potential for natural attenuation of chlorinated ethenes. Reductive dechlorination of chlorinated ethanes apparently occurs to a lesser extent, indicating relatively less potential for natural attenuation of chlorinated ethanes. Additional data are needed on the concentrations and distribution of chlorinated ethenes and ethanes in individual fine sand intervals of the Numerous Sand Channels Zone. This information, combined with lower minimum reporting levels for future chloroethane analyses, might enable a more complete and quantitative assessment of the potential for natural attenuation at the site.

Texas↗
USGS2024

Geologic framework and hydrostratigraphy of the Edwards and Trinity aquifers within parts of Bandera and Kendall Counties, Texas

The karstic Edwards and Trinity aquifers are classified as major sources of water in south-central Texas by the Texas Water Development Board. During 2019–23 the U.S. Geological Survey, in cooperation with the Edwards Aquifer Authority, mapped and described the geology and hydrostratigraphy of the rocks composing the Edwards and Trinity aquifers within parts of Bandera and Kendall Counties from field observations of the surficial expressions of the rocks. The thicknesses of the mapped lithostratigraphic and hydrostratigraphic units were also estimated from field observations in the study area. The Cretaceous rocks in the study area are part of the Trinity Group and Edwards Group. The groups, formations, and members are composed primarily of layers of marls, shales, and limestones. The limestones are composed of mudstone through grainstone, framestone and boundstone, dolomite, and argillaceous and evaporitic rocks. The principal structural feature in the study area is the Balcones fault zone. The Balcones fault zone is the result of late Oligocene and early Miocene extensional faulting and fracturing that was a result of the eastern Edwards Plateau uplift. In the Balcones fault zone, most of the faults in the study area are high-angle to vertical, en echelon, normal faults that are predominantly downthrown to the southeast. Hydrostratigraphically, the rocks exposed in the study area are those that contain the Edwards aquifer, the upper zone of the Trinity aquifer, and the middle zone of the Trinity aquifer. Descriptions of the hydrostratigraphic units, thicknesses, hydrologic function, porosity types, and field identification and observations are provided, including those for the informal Bandera and Love Creek hydrostratigraphic units of the Edwards aquifer, which were identified through the mapping for this study.

Texas↗
USGS1996

Hydrogeologic investigation and simulation of ground-water flow in the Upper Floridan Aquifer of north-central Florida and southwestern Georgia and delineation of contributing areas for selected city of Tallahassee, Florida, water-supply wells

A 4-year investigation of the Upper Floridan aquifer and ground-water flow system in Leon County, Florida, and surrounding counties of north-central Florida and southwestern Georgia began in 1990. The purpose of the investigation was to describe the ground-water flow system and to delineate the contributing areas to selected City of Tallahassee, Florida, water-supply wells. The investigation was prompted by the detection of low levels of tetrachloroethylene in ground-water samples collected from several of the city's water-supply wells. Hydrologic data and previous studies indicate that; ground-water flow within the Upper Floridan aquifer can be considered steady-state; the Upper Floridan aquifer is a single water-bearing unit; recharge is from precipitation; and that discharge occurs as spring flow, leakage to rivers, leakage to the Gulf of Mexico, and pumpage. Measured transmissivities of the aquifer ranged from 1,300 ft 2 /d (feet squared per day) to 1,300,000 ft2/d. Steady-state ground-water flow in the Upper Floridan aquifer was simulated using a three-dimensional ground- water flow model. Transmissivities ranging from less than 5,000 ft2/d to greater than 11,000,000 ft 2 /d were required to calibrate to observed conditions. Recharge rates used in the model ranged from 18.0 inches per year in areas where the aquifer was unconfined to less than 2 inches per year in broad areas where the aquifer was confined. Contributing areas to five Tallahassee water-supply wells were simulated by particle- tracking techniques. Particles were seeded in model cells containing pumping wells then tracked backwards in time toward recharge areas. The contributing area for each well was simulated twice, once assuming a porosity of 25 percent and once assuming a porosity of 5 percent. A porosity of 25 percent is considered a reasonable average value for the Upper Floridan aquifer; the 5 percent porosity simulated the movement of ground-water through only solution-enhanced bedding plains and fractures. The contributing areas were generally elliptical in shape, reflecting the influence of the sloping potentiometric surface. The contributing areas delineated for a 5 percent porosity were always much larger than those determined using a 25 percent porosity. The lowest average ground-water velocity computed within a contributing area, using a 25 percent porosity, was 1.0 ft/d (foot per day) and the highest velocity was 1.6 ft/d. The lowest average ground-water velocity, determined using a 5 percent porosity, was 2.4 ft/d and the highest was 7.4 ft/d. The contributing areas for each of the five wells was also determined analytically and compared to the model-derived areas. The upgradient width of the simulated contributing areas were larger than the upgradient width of the analytically determined contributing areas for four of the five wells. The model could more accurately delineate contributing areas because of the ability to simulate wells as partially penetrating and by incorporating complex, three-dimensional aquifer characteristics, which the analytical method could not.

Florida, Georgia↗
USGS2025

Using peak geometry and shifts in the x-ray spectrum of carbon from electron probe microanalysis to determine thermal maturity of organic matter

During the burial of mudstones, the associated organic matter undergoes gradual thermal maturation, a key process that can influence the reactivity of organic matter during catagenesis, the formation of hydrocarbon deposits and the chemical weathering of mudstones. Conventional methods for assessing the thermal maturity of organic matter often fail to reflect the geochemical heterogeneity between individual organic phases in mudstone samples. Here, we report an alternative, non-destructive, surficial and micro-scale (analytical spot size of ~ 300 nm with about 4 μm diffusion depth for micrometre-size organic grains) method to evaluate the thermal maturity of organic matter in mudstones using the carbon K α X-ray spectrum measured by field emission-electron probe microanalyser (FE-EPMA). Using this method, we observed correlations between parameter values derived from FE-EPMA spectra, including the peak position, the peak area and the intra-sample heterogeneity of these measurements, and independently measured vitrinite/solid bitumen reflectance for a suite of mudstones, representing different age, geological context and burial depth. With the increased values in peak area and position, we identified an increase in the carbon mass fraction of organic matter and the mean nominal oxidation state of carbon approaching zero. These trends, which are consistent with aromatisation and graphitisation, provide the rationale for using FE-EPMA to estimate the thermal maturity of organic matter. To explore some of these trends in more detail, we employed time-of-flight secondary ionisation mass spectrometry, X-ray photoelectron spectroscopy and optical reflectance measurements on a subset of samples.

Geostandards and Geoanalytical Research↗
USGS2023

Eruptive history within the vicinity of Al Madīnah in northern Harrat Rahat, Kingdom of Saudi Arabia

The northernmost part of the Harrat Rahat volcanic field contains early Pleistocene to Holocene mafic eruptive products within the vicinity of the city of Al Madīnah, Kingdom of Saudi Arabia. A detailed geologic investigation into the eruptive history of a 570 square kilometer (km 2 ) area covering Al Madīnah and the surrounding area has yielded 33 mapped Quaternary volcanic units consisting of lava flows, scoria cones, and shield volcanoes. These eruptive products consist of continental, intraplate alkalic and minor transitional basalts, hawaiites, and a single mugearite that were emplaced from at least 1,014±14 thousand years ago (ka) to a single Holocene eruption in 1256 C.E. Lava flows are generally 10 to 15 kilometers (km) long (but can reach 23 km long), 1 to 3 km wide, and at least 10 meters thick. Most of the mapped units erupted episodically between 400 and 340 ka and 180 and 100 ka. Despite small individual volumes (less than 1 cubic kilometers dense rock equivalent), each unit represents eruption of a distinct magma batch that was strongly influenced by clinopyroxene, olivine, and plagioclase fractionation. Some of these units are interpreted to have undergone magma mixing pre- and (or) syneruptively. Integrating eruption ages, geochemistry, and paleomagnetic data yields evidence that some eruptions were temporally and (or) spatially clustered. Aligned scoria cones and elongate vent edifices were constructed atop fissure vent systems that reflect the local stress field, which controls dike ascent through the middle and upper crust.

Professional Paper↗