USGS Science⌕ Search

SEARCH · USGS Science

Results for “Geological Journal”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27Linked to original sources
USGS2003

Fracture network of the Ferron Sandstone Member of the Mancos Shale, east-central Utah, USA

The fracture network at the outcrop of the Ferron Sandstone Member of the Mancos Shale was studied to gain an understanding of the tectonic history of the region and to contribute data to studies of gas and water transmissivity related to the occurrence and production of coal-bed methane. About 1900 fracture readings were made at 40 coal outcrops and 62 sandstone outcrops in the area from Willow Springs Wash in the south to Farnham dome in the north of the study area in east-central Utah.Two sets of regional, vertical to nearly vertical, systematic face cleats were identified in Ferron coals. A northwest-striking set trends at a mean azimuth of 321??, and a northeast-striking set has a mean azimuth of 55??. Cleats were observed in all coal outcrops examined and are closely spaced and commonly coated with thin films of iron oxide.Two sets of regional, systematic joint sets in sandstone were also identified and have mean azimuths of 321?? and 34??. The joints of each set are planar, long, and extend vertically to nearly vertically through multiple beds; the northeast-striking set is more prevalent than the northwest-striking set. In some places, joints of the northeast-striking set occur in closely spaced clusters, or joint zones, flanked by unjointed rock. Both sets are mineralized with iron oxide and calcite, and the northwest-striking set is commonly tightly cemented, which allowed the northeast-striking set to propagate across it. All cleats and joints of these sets are interpreted as opening-mode (mode I) fractures. Abutting relations indicate that the northwest-striking cleats and joints formed first and were later overprinted by the northeast-striking cleats and joints. Burial curves constructed for the Ferron indicate rapid initial burial after deposition. The Ferron reached a depth of 3000 ft (1000 m) within 5.2 million years (m.y.), and this is considered a minimum depth and time for development of cleats and joints. The Sevier orogeny produced southeast-directed compressional stress at this time and is thought to be the likely mechanism for the northwest-striking systematic cleats and joints. The onset of the Laramide orogeny occurred at about 75 Ma, within 13.7 m.y. of burial, and is thought to be the probable mechanism for development of the northeast-striking systematic cleats and joints. Uplift of the Ferron in the late Tertiary contributed to development of butt cleats and secondary cross-joints and probably enhanced previously formed fracture sets. Using a study of the younger Blackhawk Formation as an analogy, the fracture pattern of the Ferron in the subsurface is probably similar to that at the surface, at least as far west as the Paradise fault and Joe's Valley graben. Farther to the west, on the Wasatch Plateau, the orientations of Ferron fractures may diverge from those measured at the outcrop. ?? 2003 Elsevier B.V. All rights reserved.

International Journal of Coal Geology↗
USGS2003

FTIR-derived characteristics of fossil-gymnosperm leaf remains of Cordaites principalis and Cordaites borassifolius (Pennsylvanian, Maritimes Canada and Czech Republic)

Cordaites principalis and Cordaites borassifolius, gymnosperm trees of the Carboniferous, are distinguished based on compression and cuticular morphology. A new distinction between them is suggested on the basis of differences in functional groups. Cuticular and compression spectra of C. borassifolius have lower CH2/CH3 ratios, suggesting more branched aliphatic chains in comparison with cuticles and compressions of C. principalis. Other differences are observed with Fourier transform infrared spectroscopy (FTIR) technique, but they vary from sample to sample of the two species to suggest other than chemotaxonomic-based sources of variations. ?? 2003 Elsevier B.V. All rights reserved.

International Journal of Coal Geology↗
USGS2003

Production waters associated with the Ferron coalbed methane fields, central Utah: Chemical and isotopic composition and volumes

This study investigated the composition of water co-produced with coalbed methane (CBM) from the Upper Cretaceous Ferron Sandstone Member of the Mancos Shale in east-central Utah to better understand coalbed methane reservoirs. The Ferron coalbed methane play currently has more than 600 wells producing an average of 240 bbl/day/well water. Water samples collected from 28 wellheads in three fields (Buzzards Bench, Drunkards Wash, and Helper State) of the northeast-southwest trending play were analyzed for chemical and stable isotopic composition.Water produced from coalbed methane wells is a Na-Cl-HCO3 type. Water from the Drunkards Wash field has the lowest total dissolved solids (TDS) (6300 mg/l) increasing in value to the southeast and northeast. In the Helper State field, about 6 miles northeast, water has the highest total dissolved solids (43,000 mg/l), and major ion abundance indicates the possible influence of evaporite dissolution or mixing with a saline brine. In the southern Buzzards Bench field, water has variable total dissolved solids that are not correlated with depth or spatial distance. Significant differences in the relative compositions are present between the three fields implying varying origins of solutes and/or different water-rock interactions along multiple flow paths.Stable isotopic values of water from the Ferron range from +0.9??? to -11.4??? ?? 18O and -32??? to -90??? ?? 2H and plot below the global meteoric water line (GMWL) on a line near, but above values of present-day meteoric water. Isotopic values of Ferron water are consistent with modification of meteoric water along a flow path by mixing with an evolved seawater brine and/or interaction with carbonate minerals. Analysis of isotopic values versus chloride (conservative element) and total dissolved solids concentrations indicates that recharge water in the Buzzards Bench area is distinct from recharge water in Drunkards Wash and is about 3 ??C warmer. These variations in isotopes along with compositional variations imply that the Ferron reservoir is heterogeneous and compartmentalized, and that multiple flow paths may exist. ?? 2003 Published by Elsevier B.V. All rights reserved.

International Journal of Coal Geology↗
USGS1996

Lower and lower Middle Pennsylvanian coal palynofloras, southwestern Virginia

Lower and lower Middle Pennsylvanian coals, recovered from an exploratory drilling program in southwestern Virginia, were analyzed for their palynomorph content. Results show them to be dominated by spores produced by arboreous lycopsids. Lycospora pellucida and Lycospora pusilla generally are the most common species, with others, namely Lycospora granulata, L. micropapillata and Lycospora orbicula being locally abundant. Densosporites, Cristatisporites, Radiizonates and Cingulizonates , representing small lycopsids, and Granulatisporites , produced by small ferns, and perhaps some pteridosperms typically are sub-dominant taxa. The recovered palynofloras are similar in overall composition making individual coal bed identification and correlation very difficult, if not impossible. However, the introduction and extinction of a few forms do assist the correlation of packages of strata, on both an intra- and interbasinal scale. Dictyotriletes bireticulatus is first observed in basal Lee Formation strata, at about the level of the Cove Creek coal bed. Radiizonates aligerans and R. striatus also appear more abundantly at this level, although some forms have been observed in older, Pocahontas Formation coals. This level essentially coincides with the Namurian C/Westphalian A boundary, based on plant megafossil evidence. Laevigatosporites minor, L. vulgaris, Endosporites globiformis, E. zonalis and Granasporites medius are first seen consistently just above the Sewell coal bed. Radiizonates aligerans, R. striatus and Densosporites irregularis are last seen in the early Middle Pennsylvanian, at about the level of the Splash Dam coal bed. Schulzospora rara occurs throughout Early and early Middle Pennsylvanian strata, and is last seen in the Manchester coal. The Manchester is directly overlain by the Betsie Shale, a widespread marine unit; the base of the Betsie marks the Westphalian A/B contact. When compared with palynomorph assemblage zonations published for the Western Interior, and Eastern Interior Basins, Early and early Middle Pennsylvanian palynofloras from the Central Appalachian Basin compare most favorably with early Morrowan strata. Analysis of bench samples indicates that Lycospora typically dominates basal and middle portions of Early and early Middle Pennsylvanian coals. More terminal layers often contain higher percentages of Granulatisporites (and related trilete, sphaerotriangular genera, e.g. Lophotriletes, Acanthotriletes, Deltoidspora ) and Densosporites (and related trilete, crassicingulate genera, e.g. Cristatisporites, Cingulizonates, Radiizonates ). This temporal change is consistently observed and may primarily reflect a water table change within the paleomires from consistently high (covered with water or at least water-logged most of the time) to intermittently low (occasional substrate exposure).

International Journal of Coal Geology↗
USGS1996

Geochemical and palynological indicators of the paleoecology of the River Gem coal bed, Whitley County, Kentucky

The River Gem coal bed (upper Westphalian A) was sampled at five sites in a single mine in Whitley County, Kentucky. Previous petrographic and sulfur analyses of the collected interval samples showed that the coal bed could be divided into a basal low-sulfur lithotype, a middle high-sulfur bone lithotype and an upper high-sulfur lithotype. At one location a high-sulfur rider unit is present. In this study we have conducted detailed palynological analyses on all of the interval samples and ash geochemistry on the upper high-sulfur lithotype intervals and two of the basal high-sulfur basal lithotype intervals. Geochemical analyses show that As and Pb are generally high in the high-sulfur upper lithotypes from all five sites. Carbonates, having associated high levels of Ba and Sr, are important in the ash geochemistry of the lower, low-sulfur lithotypes. Ga, Ge and W are enriched in the higher vitrinite lithotypes among the low-sulfur samples. The basal lithotype at each of two sites, which was analyzed in detail, is enriched in yttrium plus the lighter rare earth elements. The basal low-sulfur lithotypes are dominated by arboreous lycopod spores. The middle, low-sulfur portion of the bed is dominated by herbaceous lycopsids ( Densosporites ) at the base of the unit and becomes increasingly enriched in Lycospora towards the top of the unit indicating that the peat-forming environment became wetter. The greatest arboreous lycopod spore abundances in the upper, high-sulfur portion the bed, along with an overlying marine roof, indicates that peat deposition was terminated by a marine inundation.

International Journal of Coal Geology↗
USGS1996

A depositional model for the Taylor coal bed, Martin and Johnson counties, eastern Kentucky

This study investigated the Taylor coal bed in Johnson and Martin counties, eastern Kentucky, using field and petrographic techniques to develop a depositional model of the coal bed. Petrography and chemistry of the coal bed were examined. Multiple benches of the Taylor coal bed were correlated over a 10 km distance. Three sites were studied in detail. The coal at the western and eastern sites were relatively thin and split by thick clastic partings. The coal at the central site was the thickest and unsplit. Two major clastic partings are included in the coal bed. Each represents a separate and distinct fluvial splay. The Taylor is interpreted to have developed on a coastal plain with periodic flooding from nearby, structurally-controlled fluvial systems. Doming is unlikely due to the petrographic and chemical trends, which are inconsistent with modern Indonesian models. The depositional history and structural and stratigraphic setting suggest contemporaneous structural influence on thickness and quality of the Taylor coal bed in this area.

International Journal of Coal Geology↗
USGS1996

Petrography, geochemistry and palynology of the Stockton coal bed (Middle Pennsylvanian), Martin County, Kentucky

The Middle Pennsylvanian (Westphalian D) Stockton (also known as the Broas) coal bed of the Breathitt Formation is an important energy resource in Kentucky. Petrographic, geochemical and palynologic studies were undertaken from mine, core and highway exposures in Martin and northern Pike counies, Kentucky, in order to determine the influence of the Stockton depositional ecosystem on those parameters. Vitrinite-rich Stockton lithotypes are dominated by Lycospora . Dull lithotypes, including both high- and low-ash yield durains, generally have abundant Densosporites , suggesting that the parent plant inhabited a fairly wide range of environments. Lithologies having tree ferns as an important component also have high fusinite + semifusinite and a low telinite/gelocollinite ratio. The aerial root bundles of the tree ferns were susceptible to oxidation and, for tissue not oxidized to inertinite, to preservation as gelocollinite. In the initial stages of formation, the Stockton mire was discontinuous and had a rather restricted floral assemblage. The presence of durains higher in the Stockton section, particularly the low-ash yield durains having petrographic indicators of degradation, suggests that portions of the mire developed as a domed peat. The termination of the mire as a high-sulfur, arboreous lycopod-domimated mire is consistent with the return to more planar mire development.

International Journal of Coal Geology↗
USGS1996

A drowned lycopsid forest above the Mahoning coal (Conemaugh Group, Upper Pennsylvanian) in eastern Ohio, U.S.A

Over 800 mud-filled casts of upright lycopsid tree stumps have been documented immediately above the Mahoning coal in an active underground mine located in northwestern Jefferson County, Ohio. The coal body originated as a pod-shaped peat body of ∼ 60 km 2 . Trees are rooted at several levels within a thin (15–40 cm) bone coal directly above the banded coal; they extend upward up to 15 cm into overlying, flat-bedded, carbonaceous mudstones that coarsen up. From a maximum basal diameter of 1.2 m, stumps taper upward to diameters no less than 0.3 m. Within single-entry transects, < 6 m wide that total 2585 m in length, stumps are randomly distributed. The trees are identified as lepidodenrids on the basis of gross morphology, external stem patterns, and attached stigmarian root systems, and provisionally as Lepidophloios or Lepidodendron by associated palynology of the enclosing matrix. Palynological analyses of incremental seam samples indicate an initial dominance of lycopsid spores with lepidodendracean affinities ( Lycospora granulata from Lepidophloios hallii ), replaced upwards by tree-fern spores, with a reoccurrence of lepidodendracean spores in the upper benches: spores of Sigillaria (Crassispora) are abundant only at the base of the coal. Petrographic analyses indicate a prallel trend from vitrinite-rich to inertinite- and liptinite-rich upward in the coal body. All data indicate that the peat represented by the Mahoning coal was drowned slowly. During the earliest stages of inundation, a lycopsid forest was re-established, only to be subsequently drowned.

International Journal of Coal Geology↗
USGS1996

Application of reflectance micro-Fourier Transform infrared analysis to the study of coal macerals: An example from the Late Jurassic to Early Cretaceous coals of the Mist Mountain Formation, British Columbia, Canada

The applicability of the reflectance micro-Fourier Transform infra-red spectroscopy (FTIR) technique for analyzing the distribution of functional groups in coal macerals is discussed. High quality of spectra, comparable to those obtained using other FTIR techniques (KBr pellet and transmission micro-FTIR), indicate this technique can be applied to characterizing functional groups under most conditions. The ease of sample preparation, the potential to analyze large intact samples, and ability to characterize organic matter in areas as small as 20 ??m are the main advantages of reflectance micro-FTIR. The quantitative aspects of reflectance micro-FTIR require further study. The examples from the coal seams of the Mist Mountain Formation, British Columbia show that at high volatile bituminous rank, reflectance micro-FTIR provides valuable information on the character of aliphatic chains of vitrinite and liptinite macerals. Because the character of aliphatic chains influences bond disassociation energies, such information is useful from a hydrocarbon generation viewpoint. In medium volatile bituminous coal liptinite macerals are usually not detectable but this technique can be used to study the degree of oxidation and reactivity of vitrinite and semifusinite.

International Journal of Coal Geology↗
USGS1997

Channel-fill coal beds along the western margin of the Eastern Kentucky Coal Field

Four channel-filling coal beds from the lower part of the Breathitt Formation (lower Middle Pennsylvanian, late Westphalian A) were examined palynologically, petrographically and geochemically to determine the paleoenvironmental conditions under which these peats accumulated. These results were then compared with detailed sedimentological analyses of the strata overlying the coal in the channels to see if any genetic relationship between coal composition and the origin of the overburden could be drawn. All four of the coal beds used in this study are located in the western-most part of the Eastern Kentucky Coal Field and occur at, or near, the Early Pennsylvanian unconformity (0–30 m). Lycospora and Densosporites (and related crassicingulate taxa, e.g. Cristatisporites , Cingulizonates and Radiizonates ) dominate the studied assemblages, with Granulatisporites (and related trilete, sphaerotriangular genera, e.g. Leiotriletes and Lophotriletes ), Laevigatosporites and Schulzospora being common accessory genera. Petrographically, all four coals contain high percentages of vitrinite macerals (avg. 78.6% mineral matter free), moderate amounts of liptinite (or exinite) macerals (avg. 14.9%, mmf) and low percentages of inertinite macerals (avg. 6.5%, mmf). Strata above the coals consist of dark, carbonaceous shales, and heterolithic strata that exhibit varying degrees of bioturbation. Commonly occurring trace fossils include Arenicolites , Monocraterion , Planolites and Skolithos . Although marine-influenced strata, as determined from detailed sedimentology and ichnology (the study of trace fossils), covers all four coal beds, they are not uniformly high in total total sulfur content as might be expected. Rather they are extremely variable, ranging from 1–9% (dry basis) total sulfur. Ash yields are also variable ranging from 6.2–54.3% (dry basis). It is probable that the origin of the very first sediments covering the peat, as well as the amount of brackish water influence during peat accumulation, were important factors in determining the total sulfur content of the resultant coal. Initial sedimentation of fresh water clays and silts may have acted as a barrier to downward percolation/diffusion of sulfate bearing waters, or may have served as a site for sulfide formation, thereby keeping the total sulfur content of the underlying coal low. If initial sedimentation was of brackish or marine origin, as indicated by bioturbated laminae directly above the coal, or if the peat was subject to frequent brackish or marine water influence during accumulation, then sulfide generation might proceed unchecked, resulting in high sulfur coal.

International Journal of Coal Geology↗
USGS1997

Organic geochemical study of sequences overlying coal seams; example from the Mansfield Formation (Lower Pennsylvanian), Indiana

Roof successions above two coal seams from the Mansfield Formation (Lower Pennsylvanian) in the Indiana portion of the Illinois Basin have been studied with regard to sedimentary structures, organic petrology and organic geochemistry. The succession above the Blue Creek Member of the Mansfield Formation is typical of the lithologies covering low-sulphur coals (< 1%) in the area studied, whereas the succession above the unnamed Mansfield coal is typical of high-sulphur coals (>2.%). The transgressive-regressive packages above both seams reflect the periodic inundation of coastal mires by tidal flats and creeks as inferred from bioturbation and sedimentary structures such as tidal rhythmites and clay-draped ripple bedforms. Geochemistry and petrology of organic facies above the Blue Creek coal suggest that tidal flats formed inland in fresh-water environments. These overlying fresh water sediments prevented saline waters from invading the peat, contributing to low-sulphur content in the coal. Above the unnamed coal, trace fossils and geochemical and petrological characteristics of organic facies suggest more unrestricted seaward depositional environment. The absence of saline or typically marine biomarkers above this coal is interpreted as evidence of very short periods of marine transgression, as there was not enough time for establishment of the precursor organisms for marine biomarkers. However, sufficient time passed to raise SO 4 2− concentration in pore waters, resulting in the formation of authigenic pyrite and sulphur incorparation into organic matter.

International Journal of Coal Geology↗
USGS1998

Geochemistry of coalbed gas - a review

Coals are both sources and reservoirs of large amounts of gas that has received increasing attention in recent years as a largely untapped potential energy resource. Coal mining operations, such as ventilation of coalbed gas from underground mines, release coalbed CH4 into the atmosphere, an important greehouse gas whose concentration in the atmosphere is increasing. Because of these energy and environmental issues, increased research attention has been focused on the geochemistry of coalbed gas in recent years. This paper presents a summary review of the main aspects of coalbed gas geochemistry and current research advances.Coals are both sources and reservoirs of large amounts of gas that has received increasing attention in recent years as a largely untapped potential energy resource. Coal mining operations, such as ventilation of coalbed gas from underground mines, release coalbed CH4 into the atmosphere, an important greenhouse gas whose concentration in the atmosphere is increasing. Because of these energy and environmental issues, increased research attention has been focused on the geochemistry of coalbed gas in recent years. This paper presents a summary review of the main aspects of coalbed gas geochemistry and current research advances.

International Journal of Coal Geology↗
USGS1997

Petrography and geochemistry of selected lignite beds in the Gibbons Creek mine (Manning Formation, Jackson Group, Paleocene) of east-central Texas

This study examined the petrographic and geochemical characteristics of two lignite beds (3500 and 4500 beds, Manning Formation, Jackson Group, Eocene) that are mined at the Gibbons Creek mine in east-central Texas. The purpose of the study was to identify the relations among sample ash yield, coal petrography, and trace-element concentrations in lignite and adjoining rock layers of the Gibbons Creek mine. Particular interest was given to the distribution of 12 environmentally sensitive trace elements (As, Be, Cd, Cr, Co, Hg, Mn, Ni, Pb, Sb, Se, and U) that have been identified as potentially hazardous air pollutants (HAPs) in the United States Clean Air Act Amendments of 1990. Eleven lignite, floor, and rock parting samples were collected from incremental channel samples of the 3500 and 4500 beds that were exposed in a highwall of pit A3 at the Gibbons Creek mine. Short proximate and ultimate and forms of sulfur analyses were performed on all lignite samples, and lignite and rock samples were analyzed for 60 major, minor and trace elements. Representative splits of all lignite samples were ground and cast into pellets, and polished for petrographic analyses in blue-light fluorescence and reflected white light to determine liptinite, inertinite, and huminite maceral group percentages. The following observations summarize our results and conclusions about the geochemistry, petrography, and sedimentology of the 3500 and 4500 beds of the Gibbons Creek lignite deposit: (1) Weighted average dry (db) ash yield for the two beds is 29.7%, average total sulfur content is 2.6%, and average calorific value is 7832 Btu (18.22 MJ/kg). Ash yields are greatest in the lower bench (59.33% db) of the 3500 bed and in the upper bench of the 4500 bed (74.61% db). (2) For lignite samples (on a whole-coal basis), the distributions of two of the HAPs (Pb and Sb) are positively related to ash yield, probably indicating an inorganic affinity for these elements. By using cluster analysis we found that Be and Cd were poorly associated with ash yield, indicating a possible organic affinity, and that Ni, Se, Hg, U, and Pb cluster with most of the rare-earth elements. (3) The dominance of the crypto-eugelinite maceral subgroup over the crypto-humotelinite subgroup suggests that all Gibbons Creek lignites were subjected to peat-forming conditions (either biogenic or chemical) conducive to the degradation of wood cellular material into matrix gels, or that original plant material was not very woody and was prone to formation of matrix gels. The latter idea is supported by pollen studies of Gibbons Creek lignite beds; results indicate that the peat was derived in part from marsh plants low in wood tissue. (4) The occurrence of siliceous sponge spicules in the lower benches of the 3500 bed suggests the original peat in this part of the bed was deposited in standing, fresh water. (5) The petrographic data indicate that the upper sample interval of the 3500 bed contains more inertinite (3%) than the other samples studied. Increases in inertinite content in the upper part of the 3500 bed may have been associated with alteration of the peat by acids derived from the volcanic ash or could have been caused by fire, oxidation and drying, or biologic alteration of the peat in the paleo-mire.

International Journal of Coal Geology↗
USGS1997

The origin and distribution of HAPs elements in relation to maceral composition of the A1 lignite bed (Paleocene, Calvert Bluff Formation, Wilcox Group), Calvert mine area, east-central Texas

The origin and distribution of twelve potentially Hazardous Air Pollutants (HAPs; As, Be, Cd, Cr, Co, Hg, Mn, Ni, Pb, Sb, Se, and U) identified in the 1990 Clean Air Act Amendments were examined in relation to the maceral composition of the A1 bed (Paleocene, Calvert Bluff Formation, Wilcox Group) of the Calvert mine in east-central Texas. The 3.2 m-thick A1 bed was divided into nine incremental channel samples (7 lignite samples and 2 shaley coal samples) on the basis of megascopic characteristics. Results indicate that As, Cd, Cr, Ni, Pb, Sb, and U are strongly correlated with ash yield and are enriched in the shaley coal samples. We infer that these elements are associated with inorganic constituents in the coal bed and may be derived from a penecontemporaneous stream channel located several kilometers southeast of the mining block. Of the HAPs elements studied, Mn and Hg are the most poorly correlated to ash yield. We infer an organic association for Mn; Hg may be associated with pyrite. The rest of the trace elements (Be, Co, and Se) are weakly correlated with ash yield. Further analytical work is necessary to determine the mode of occurrence for these elements. Overall, concentrations of the HAPs elements are generally similar to or less than those reported in previous studies of lignites of the Wilcox Group, east-central region, Texas. Petrographic analysis indicates the following ranges in composition for the seven lignite samples: liptinites (5–8%), huminites (88–95%), and inertinites (trace amounts to 7%). Samples from the middle portion of the A1 bed contain abundant crypto-eugelinite compared to the rest of the samples; this relationship suggests that the degradation of plant material was an important process during the development of the peat mire. With the exception of Hg and Mn, relatively low levels of the HAPs elements studied are found in the samples containing abundant crypto-eugelinite. We infer that the peat-forming environment for this portion of the coal bed was very wet with minimal detrital input. Relatively high concentrations of crypto-humotelinite were found in samples from the top and base of the coal bed. The presence of abundant crypto-humotefinite in this part of the coal bed suggests the accumulation of wood-rich peat under conditions conducive to a high degree of tissue preservation in the peat mire. Although several of the trace elements (Be, Co, Ni, and Sb) exhibit enrichment in these samples, they are not necessarily chemically associated with humotelinite. We infer that these elements, with the exception of Be, are possibly associated with deposition of the roof and floor rock of the coal bed; however, further analytical work would be necessary to confirm this hypothesis. Beryllium may have an organic origin.

International Journal of Coal Geology↗
USGS1998

Coalbed methane: from hazard to resource

Coalbed gas, which mainly consists of methane, has remained a major hazard affecting safety and productivity in underground coal mines for more than 100 yr. Coalbed gas emissions have resulted in outbursts and explosions where ignited by open lights, smoking or improper use of black blasting powder, and machinery operations. Investigations of coal gas outbursts and explosions during the past century were aimed at predicting and preventing this mine hazard. During this time, gas emissions were diluted with ventilation by airways (eg, tunnels, vertical and horizontal drillholes, shsfts) and by drainage boreholes. The 1970s 'energy crisis' led to studies of the feasibility of producing the gas for commercial use. Subsequent research on the origin, accumulation, distribution, availability, and recoverability has been pursued vigorously during the past two decades. Since the 1970s research investigations on the causes and effects of coal mine outbursts and gas emissions have led to major advances towards the recovery and development of coalbed methane for commercial use. Thus, coalbed methane as a mining hazard was harnessed as a conventional gas resource.Coalbed gas, which mainly consists of methane, has remained a major hazard affecting safety and productivity in underground coal mines for more than 100 years. Coalbed gas emissions have resulted in outbursts and explosions where ignited by open lights, smoking or improper use of black blasting powder, and machinery operations. Investigations of coal gas outbursts and explosions during the past century were aimed at predicting and preventing this mine hazard. During this time, gas emissions were diluted with ventilation by airways (e.g., tunnels, vertical and horizontal drillholes, shafts) and by drainage boreholes. The 1970's `energy crisis' led to studies of the feasibility of producing the gas for commercial use. Subsequent research on the origin, accumulation, distribution, availability, and recoverability has been pursued vigorously during the past two decades. Since the 1970's research investigations on the causes and effects of coal mine outbursts and gas emissions have led to major advances towards the recovery and development of coalbed methane for commercial use. Thus, coalbed methane as a mining hazard was harnessed as a conventional gas resource.

International Journal of Coal Geology↗
USGS1998

Influence of an igneous intrusion on the inorganic geochemistry of a bituminous coal from Pitkin County, Colorado

Although the effects of igneous dikes on the organic matter in coal have been observed at many localities there is virtually no information on the effects of the intrusions of the inorganic constituents in the coal. Such a study may help to elucidate the behavior of trace elements during in situ gasification of coal and may provide insights into the resources potential for coal and coke affected by the intrusion. To determine the effects of an igneous intrusion on the inorganic chemistry of a coal we used a series of 11 samples of coal and natural coke that had been collected at intervals from 3 to 106 cm from a dike that intruded the bituminous Dutch Creek coal in Pitkin, CO. The samples were chemically analyzed for 66 elements. SEM-EDX and X-ray diffraction analysis were performed on selected samples. Volatile elements such as F, Cl, Hg, and Se are not depleted in the samples (coke and coal) nearest the dike that were exposed to the highest temperatures. Their presence in these samples is likely due to secondary enrichment following volatilization of the elements inherent in the coal. Equilibration with ground water may account for the uniform distribution of Na, B, and Cl. High concentrations of Ca, Mg, Fe, Mn, Sr, and CO2 in the coke region are attributed to the reaction of CO and CO2 generated during the coking of the coal with fluids from the intrusion, resulting in the precipitation of carbonates. Similarly, precipitation of sulfide minerals in the coke zone may account for the relatively high concentrations of Ag, Hg, Cu, Zn, and Fe. Most elements are concentrated at the juncture of the fluidized coke and the thermally metamorphosed coal. Many of the elements enriched in this region (for example, Ga, Ge, Mo, Rb, U, La, Ce, Al, K, and Si) may have been adsorbed on either the clays or the organic matter or on both.Although the effects of igneous dikes on the organic matter in coal have been observed at many localities there is virtually no information on the effects of the intrusions on the inorganic constituents in the coal. Such a study may help to elucidate the behavior of trace elements during in situ gasification of coal and may provide insights into the resource potential of coal and coke affected by the intrusion. To determine the effects of an igneous intrusion on the inorganic chemistry of a coal we used a series of 11 samples of coal and natural coke that had been collected at intervals from 3 to 106 cm from a dike that intruded the bituminous Dutch Creek coal in Pitkin, CO. The samples were chemically analyzed for 66 elements. SEM-EDX and X-ray diffraction analysis were performed on selected samples. Volatile elements such as F, Cl, Hg, and Se are not depleted in the samples (coke and coal) nearest the dike that were exposed to the highest temperatures. Their presence in these samples is likely due to secondary enrichment following volatilization of the elements inherent in the coal. Equilibration with ground water may account for the uniform distribution of Na, B, and Cl. High concentrations of Ca, Mg, Fe, Mn, Sr, and CO2 in the coke region are attributed to the reaction of CO and CO2 generated during the coking of the coal with fluids from the intrusion, resulting in the precipitation of carbonates. Similarly, precipitation of sulfide minerals in the coke zone may account for the relatively high concentrations of Ag, Hg, Cu, Zn, and Fe. Most elements are concentrated at the juncture of the fluidized coke and the thermally metamorphosed coal. Many of the elements enriched in this region (for example, Ga, Ge, Mo, Rb, U, La, Ce, Al, K, and Si) may have been adsorbed on either the clays or the organic matter or on both.

International Journal of Coal Geology↗
USGS1998

Change in the magnetic properties of bituminous coal intruded by an igneous dike, Dutch Creek Mine, Pitkin County, Colorado

Magnetization measurements have been made on natural coke-coal samples collected at various distances from a felsic porphyry dike in a coal seam in Dutch Creek Mine, Colorado to help characterize the nature and distribution of the iron-bearing phases. The magnetization passes through a maximum at the coke-to-coal transition about 31 cm from the dike contact. The magnetic measurements support the geochemical data indicating that magmatic fluids along with a high-temperature gas pulse moved into the coal bed. Interaction of the magmatic fluids with the coal diminished the reducing power of the thermal gas pulse from the dike to a point about 24 cm into the coal. The hot reducing gas penetrated further and produced a high temperature (~400-525??C) zone (at about 31 cm) just ahead of the magmatic fluids. Metallic iron found in this zone is the principal cause of the observed high magnetization. Beyond this zone, the temperature was too low to alter the coal significantly.Magnetization measurements have been made on natural coke-coal samples collected at various distances from a felsic porphyry dike in a coal seam in Dutch Creek Mine, Colorado to help characterize the nature and distribution of the iron-bearing phases. The magnetization passes through a maximum at the coke-to-coal transition about 31 cm from the dike contact. The magnetic measurements support the geochemical data indicating that magmatic fluids along with a high-temperature gas pulse moved into the coal bed. Interaction of the magmatic fluids with the coal diminished the reducing power of the thermal gas pulse from the dike to a point about 24 cm into the coal. The hot reducing gas penetrated further and produced a high temperature (approximately 400-525 ??C) zone (at about 31 cm) just ahead of the magmatic fluids. Metallic iron found in this zone is the principal cause of the observed high magnetization. Beyond this zone, the temperature was too low to alter the coal significantly.

International Journal of Coal Geology↗
USGS1998

Structural control of coalbed methane production in Alabama

Thin-skinned structures are distributed throughout the Alabama coalbed methane fields, and these structures affect the production of gas and water from coal-bearing strata. Extensional structures in Deerlick Creek and Cedar Cove fields include normal faults and hanging-wall rollovers, and area balancing indicates that these structures are detached in the Pottsville Formation. Compressional folds in Gurnee and Oak Grove fields, by comparison, are interpreted to be detachment folds formed above decollements at different stratigraphic levels. Patterns of gas and water production reflect the structural style of each field and further indicate that folding and faulting have affected the distribution of permeability and the overall success of coalbed methane operations. Area balancing can be an effective way to characterize coalbed methane reservoirs in structurally complex regions because it constrains structural geometry and can be used to determine the distribution of layer-parallel strain. Comparison of calculated requisite strain and borehole expansion data from calliper logs suggests that strain in coalbed methane reservoirs is predictable and can be expressed as fracturing and small-scale faulting. However, refined methodology is needed to analyze heterogeneous strain distributions in discrete bed segments. Understanding temporal variation of production patterns in areas where gas and water production are influenced by map-scale structure will further facilitate effective management of coalbed methane fields.Thin-skinned structures are distributed throughout the Alabama coalbed methane fields, and these structures affect the production of gas and water from coal-bearing strata. Extensional structures in Deerlick Creek and Cedar Cove fields include normal faults and hanging-wall rollovers, and area balancing indicates that these structures are detached in the Pottsville Formation. Compressional folds in Gurnee and Oak Grove fields, by comparison, are interpreted to be detachment folds formed above decollements at different stratigraphic levels. Patterns of gas and water production reflect the structural style of each field and further indicate that folding and faulting have affected the distribution of permeability and the overall success of coalbed methane operations. Area balancing can be an effective way to characterize coalbed methane reservoirs in structurally complex regions because it constrains structural geometry and can be used to determine the distribution of layer-parallel strain. Comparison of calculated requisite strain and borehole expansion data from calliper logs suggests that strain in coalbed methane reservoirs is predictable and can be expressed as fracturing and small-scale faulting. However, refined methodology is needed to analyze heterogeneous strain distributions in discrete bed segments. Understanding temporal variation of production patterns in areas where gas and water production are influenced by map-scale structure will further facilitate effective management of coalbed methane fields.

International Journal of Coal Geology↗