USGS Science⌕ Search

SEARCH · USGS Science

Results for “Earth’s Future”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27Linked to original sources
USGS2012

Using geochemistry to identify the source of groundwater to Montezuma Well, a natural spring in Central Arizona, USA: Part 2

Montezuma Well is a unique natural spring located in a sinkhole surrounded by travertine. Montezuma Well is managed by the National Park Service, and groundwater development in the area is a potential threat to the water source for Montezuma Well. This research was undertaken to better understand the sources of groundwater to Montezuma Well. Strontium isotopes ( 87 Sr/ 86 Sr) indicate that groundwater in the recharge area has flowed through surficial basalts with subsequent contact with the underlying Permian aged sandstones and the deeper, karstic, Mississippian Redwall Limestone. The distinctive geochemistry in Montezuma Well and nearby Soda Springs (higher concentrations of alkalinity, As, B, Cl, and Li) is coincident with added carbon dioxide and mantle-sourced He. The geochemistry and isotopic data from Montezuma Well and Soda Springs allow for the separation of groundwater samples into four categories: (1) upgradient, (2) deep groundwater with carbon dioxide, (3) shallow Verde Formation, and (4) mixing zone. δ 18 O and δD values, along with noble gas recharge elevation data, indicate that the higher elevation areas to the north and east of Montezuma Well are the groundwater recharge zones for Montezuma Well and most of the groundwater in this portion of the Verde Valley. Adjusted groundwater age dating using likely 14 C and δ 13 C sources indicate an age for Montezuma Well and Soda Springs groundwaters at 5,400–13,300 years, while shallow groundwater in the Verde Formation appears to be older (18,900). Based on water chemistry and isotopic evidence, groundwater flow to Montezuma Well is consistent with a hydrogeologic framework that indicates groundwater flow by (1) recharge in higher elevation basalts to the north and east of Montezuma Well, (2) movement through the upgradient Permian and Mississippian units, especially the Redwall Limestone, and (3) contact with a basalt dike/fracture system that provides a mechanism for groundwater to flow to the surface. While the exact nature of the groundwater flow connections is still uncertain, the available data indicate that flow to Montezuma Well may be more susceptible to future groundwater development in the Redwall Limestone than from any other geologic unit. Overall, the shallow groundwater in the surrounding Verde Formation appears to be largely disconnected from deeper groundwater flowing to Montezuma Well.

Arizona↗
USGS2009

The 2006-2007 Kuril Islands great earthquake sequence

[1] The southwestern half of a ∼500 km long seismic gap in the central Kuril Island arc subduction zone experienced two great earthquakes with extensive preshock and aftershock sequences in late 2006 to early 2007. The nature of seismic coupling in the gap had been uncertain due to the limited historical record of prior large events and the presence of distinctive upper plate, trench and outer rise structures relative to adjacent regions along the arc that have experienced repeated great interplate earthquakes in the last few centuries. The intraplate region seaward of the seismic gap had several shallow compressional events during the preceding decades (notably an M S 7.2 event on 16 March 1963), leading to speculation that the interplate fault was seismically coupled. This issue was partly resolved by failure of the shallow portion of the interplate megathrust in an M W = 8.3 thrust event on 15 November 2006. This event ruptured ∼250 km along the seismic gap, just northeast of the great 1963 Kuril Island (M w = 8.5) earthquake rupture zone. Within minutes of the thrust event, intense earthquake activity commenced beneath the outer wall of the trench seaward of the interplate rupture, with the larger events having normal-faulting mechanisms. An unusual double band of interplate and intraplate aftershocks developed. On 13 January 2007, an M W = 8.1 extensional earthquake ruptured within the Pacific plate beneath the seaward edge of the Kuril trench. This event is the third largest normal-faulting earthquake seaward of a subduction zone on record, and its rupture zone extended to at least 33 km depth and paralleled most of the length of the 2006 rupture. The 13 January 2007 event produced stronger shaking in Japan than the larger thrust event, as a consequence of higher short-period energy radiation from the source. The great event aftershock sequences were dominated by the expected faulting geometries; thrust faulting for the 2006 rupture zone, and normal faulting for the 2007 rupture zone. A large intraplate compressional event occurred on 15 January 2009 (M w = 7.4) near 45 km depth, below the rupture zone of the 2007 event and in the vicinity of the 16 March 1963 compressional event. The fault geometry, rupture process and slip distributions of the two great events are estimated using very broadband teleseismic body and surface wave observations. The occurrence of the thrust event in the shallowest portion of the interplate fault in a region with a paucity of large thrust events at greater depths suggests that the event removed most of the slip deficit on this portion of the interplate fault. This great earthquake doublet demonstrates the heightened seismic hazard posed by induced intraplate faulting following large interplate thrust events. Future seismic failure of the remainder of the seismic gap appears viable, with the northeastern region that has also experienced compressional activity seaward of the megathrust warranting particular attention.

Journal of Geophysical Research B: Solid Earth↗
USGS2022

Drivers, dynamics and impacts of changing Arctic coasts

Arctic coasts are vulnerable to the effects of climate change, including rising sea levels and the loss of permafrost, sea ice and glaciers. Assessing the influence of anthropogenic warming on Arctic coastal dynamics, however, is challenged by the limited availability of observational, oceanographic and environmental data. Yet, with the majority of permafrost coasts being erosive, coupled with projected intensification of erosion and flooding, understanding these changes is critical. In this Review, we describe the morphological diversity of Arctic coasts, discuss important drivers of coastal change, explain the specific sensitivity of Arctic coasts to climate change and provide an overview of pan-Arctic shoreline change and its multifaceted impacts. Arctic coastal changes impact the human environment by threatening coastal settlements, infrastructure, cultural sites and archaeological remains. Changing sediment fluxes also impact the natural environment through carbon, nutrient and pollutant release on a magnitude that remains difficult to predict. Increasing transdisciplinary and interdisciplinary collaboration efforts will build the foundation for identifying sustainable solutions and adaptation strategies to reduce future risks for those living on, working at and visiting the rapidly changing Arctic coast.

Alaska↗
USGS1982

The availability of conventional forms of remotely sensed data

For decades Federal and State agencies have been collecting aerial photographs of various film types and scales over parts of the United States. More recently, worldwide Earth resources data acquired by orbiting satellites have inundated the remote sensing community. Determining the types of remotely sensed data that are publicly available can be confusing to the land-resource manager, planner, and scientist. This paper is a summary of the more commonly used types of remotely sensed data (aircraft and satellite) and their public availability. Special emphasis is placed on the National High-Altitude Photography (NHAP) program and future remote-sensing satellites.

Journal of Applied Photographic Engineering↗
USGS2020

Climate sensitivity of water use by riparian woodlands at landscape scales

Semi‐arid riparian woodlands face threats from increasing extractive water demand and climate change in dryland landscapes worldwide. Improved landscape‐scale understanding of riparian woodland water use (evapotranspiration, ET) and its sensitivity to climate variables is needed to strategically manage water resources, as well as to create successful ecosystem conservation and restoration plans for potential climate futures. In this work, we assess the spatial and temporal variability of Cottonwood ( Populus fremontii )‐Willow ( Salix gooddingii ) riparian gallery woodland ET and its relationships to vegetation structure and climate variables for 80 km of the San Pedro River corridor in southeastern Arizona, USA, between 2014 and 2019. We use a novel combination of publicly available remote sensing, climate and hydrological datasets: cloud‐based Landsat thermal remote sensing data products for ET (Google Earth Engine EEFlux), Landsat multispectral imagery and field data‐based calibrations to vegetation structure (leaf‐area index, LAI), and open‐source climate and hydrological data. We show that at landscape scales, daily ET rates (6–10 mm day −1 ) and growing season ET totals (400–1,400 mm) matched rates of published field data, and modelled reach‐scale average LAI (0.80–1.70) matched lower ranges of published field data. Over 6 years, the spatial variability of total growing season ET (CV = 0.18) exceeded that of temporal variability (CV = 0.10), indicating the importance of reach‐scale vegetation and hydrological conditions for controlling ET dynamics. Responses of ET to climate differed between perennial and intermittent‐flow stream reaches. At perennial‐flow reaches, ET correlated significantly with temperature, whilst at intermittent‐flow sites ET correlated significantly with rainfall and stream discharge. Amongst reaches studied in detail, we found positive but differing logarithmic relationships between LAI and ET. By documenting patterns of high spatial variability of ET at basin scales, these results underscore the importance of accurately accounting for differences in woodland vegetation structure and hydrological conditions for assessing water‐use requirements. Results also suggest that the climate sensitivity of ET may be used as a remote indicator of subsurface water resources relative to vegetation demand, and an indicator for informing conservation management priorities.

Arizona↗
USGS2022

Iowa and Landsat

Iowa is famous for plenty of reasons—its State Fair butter sculptures, its first-in-the-Nation presidential caucuses, and the Iowa Hawkeyes football team, whose mascot doubles as the State nickname—but “corn” might be the first word to cross the mind of a non-Iowan. Iowa consistently leads the United States in corn production and in the production of hogs, which in turn consume a sizable share of the corn grown there. Corn also drives Iowa’s ethanol industry, which put nearly 4.5 billion gallons of fuel into the supply chain in 2020—more than any other State. Iowa owes its agricultural dominance largely to its fertile soils, making land management decisions critical to its future. Changes to land cover, more intensive land use, unusual precipitation patterns, and temperature changes, coupled with an influx of extreme weather events—some of which can be tied to or exacerbated by climate change—have placed pressure on the productive farm ground of Iowa’s 99 counties. Landsat Program satellites can be especially useful in the monitoring and management of croplands across the United States. Backed by a 50-year record of Earth surface change, Landsat satellites can detect the details of vegetation health by peering into the infrared and near-infrared parts of the electromagnetic spectrum. Iowa has long served as a proving ground for Landsat-based agricultural research, and its residents and leaders have benefited from that work. Here are a few examples of how the Landsat Program benefits Iowa.

Iowa↗
USGS2021

Natural and anthropogenic geochemical tracers to investigate residence times and groundwater–surface-water interactions in an urban alluvial aquifer

A multi-component geochemical dataset was collected from groundwater and surface-water bodies associated with the urban Fountain Creek alluvial aquifer, Colorado, USA, to facilitate analysis of recharge sources, geochemical interactions, and groundwater-residence times. Results indicate that groundwater can be separated into three distinct geochemical zones based on location within the flow system and proximity to surface water, and these zones can be used to infer sources of recharge and groundwater movement through the aquifer. Rare-earth-element concentrations and detections of wastewater-indicator compounds indicate the presence of effluent from wastewater-treatment plants in both groundwater and surface water. Effluent presence in groundwater indicates that streams in the area lose to groundwater in some seasons and are a source of focused groundwater recharge. Distributions of pharmaceuticals and wastewater-indicator compounds also inform an understanding of groundwater–surface-water interactions. Noble-gas isotopes corroborate rare-earth-element data in indicating geochemical evolution within the aquifer from recharge area to discharge area and qualitatively indicate variable groundwater-residence times and mixing with pre-modern groundwater. Quantitative groundwater-residence times calculated from 3 H/ 3 He, SF 6 , and lumped-parameter modeling generally are less than 20 years, but the presence of mixing with older groundwater of an unknown age is also indicated at selected locations. Future investigations would benefit by including groundwater-age tracers suited to quantification of mixing for both young (years to decades) and old (centuries and millennia) groundwater. This multi-faceted analysis facilitated development of a conceptual model for the investigated groundwater-flow system and illustrates the application of an encompassing suite of analytes in exploring hydrologic and geochemical interactions in complex systems.

Colorado↗
USGS2017

Sediment gravity flows triggered by remotely generated earthquake waves

Recent great earthquakes and tsunamis around the world have heightened awareness of the inevitability of similar events occurring within the Cascadia Subduction Zone of the Pacific Northwest. We analyzed seafloor temperature, pressure, and seismic signals, and video stills of sediment-enveloped instruments recorded during the 2011–2015 Cascadia Initiative experiment, and seafloor morphology. Our results led us to suggest that thick accretionary prism sediments amplified and extended seismic wave durations from the 11 April 2012 M w 8.6 Indian Ocean earthquake, located more than 13,500 km away. These waves triggered a sequence of small slope failures on the Cascadia margin that led to sediment gravity flows culminating in turbidity currents. Previous studies have related the triggering of sediment-laden gravity flows and turbidite deposition to local earthquakes, but this is the first study in which the originating seismic event is extremely distant (> 10,000 km). The possibility of remotely triggered slope failures that generate sediment-laden gravity flows should be considered in inferences of recurrence intervals of past great Cascadia earthquakes from turbidite sequences. Future similar studies may provide new understanding of submarine slope failures and turbidity currents and the hazards they pose to seafloor infrastructure and tsunami generation in regions both with and without local earthquakes.

Cascadia subduction zone↗
USGS2024

Trends and environmental impacts of virtual water trade

Virtual water describes water embedded in the production of goods and offers meaningful insights about the complex interplay between water, trade and sustainability. In this Review, we examine the trends, major players, traded products and key drivers of virtual water trade (VWT). Roughly 20% of water used in global food production is traded virtually rather than domestically consumed. As such, agriculture dominates VWT, with livestock products, wheat, maize, soybean, oil palm, coffee and cocoa contributing over 70% of total VWT. These products are also driving VWT growth, the volume of which has increased 2.9 times from 1986 to 2022. However, the countries leading VWT contributions (with China, the United States, the Netherlands, Germany and India accounting for 34% of the global VWT in 2022) have remained relatively stable over time, albeit with China becoming an increasingly important importer. VWT can mitigate the effects of water scarcity and food insecurity, although there are concerns about the disconnect between consumers and the environmental impacts of their choices, and unsustainable resource exploitation. Indeed, approximately 16% of unsustainable water use and 11% of global groundwater depletion are virtually traded. Future VWT analyses must consider factors such as water renewability, water quality, climate change impacts and socioeconomic implications.

Nature Reviews Earth & Environment↗
USGS2017

Manganese

Manganese is an essential element for modern industrial societies. Its principal use is in steelmaking, where it serves as a purifying agent in iron-ore refining and as an alloy that converts iron into steel. Although the amount of manganese consumed to make a ton of steel is small, ranging from 6 to 9 kilograms, it is an irreplaceable component in the production of this fundamental material. The United States has been totally reliant on imports of manganese for many decades and will continue to be so for at least the near future. There are no domestic reserves, and although some large low-grade resources are known, they are far inferior to manganese ores readily available on the international market. World reserves of manganese are about 630 million metric tons, and annual global consumption is about 16 million metric tons. Current reserves are adequate to meet global demand for several decades. Global resources in traditional land-based deposits, including both reserves and rocks sufficiently enriched in manganese to be ores in the future, are much larger, at about 17 billion metric tons. Manganese resources in seabed deposits of ferromanganese nodules and crusts are larger than those on land and have not been fully quantified. No production from seabed deposits has yet been done, but current research and development activities are substantial and may bring parts of these seabed resources into production in the future. The advent of economically successful seabed mining could substantially alter the current scenario of manganese supply by providing a large new source of manganese in addition to traditional land-based deposits. From a purely geologic perspective, there is no global shortage of proven ores and potential new ores that could be developed from the vast tonnage of identified resources. Reserves and resources are very unevenly distributed, however. The Kalahari manganese district in South Africa contains 70 percent of the world’s identified resources and about 25 percent of its reserves. South Africa, Brazil, and Ukraine together accounted for nearly 65 percent of reserves in 2013. The combination of total import reliance for manganese, the mineral commodity’s essential uses in our industrialized society, and the potential for supply disruptions because of the limited sources of the ore makes manganese among the most critical minerals for the United States. Manganese is the 12th most abundant element in Earth’s crust. Its concentration varies among common types of rocks, mostly in the range of from 0.1 to 0.2 percent. The highest quality manganese ores contain from 40 to 45 percent manganese. The formation of these ores requires specialized geologic conditions that concentrate manganese at several hundred times its average crustal abundance. The dominant processes in forming the world’s principal deposits take place in the oceans. As a result, most important manganese deposits occur in ancient marine sedimentary rocks that are now exposed on continents as a result of subsequent tectonic uplift and erosion. In many cases, other processes have further enriched these manganiferous sedimentary rocks to form some of today’s highest grade ores. Modern seabed resources of ferromanganese nodules cover vast areas of the present ocean floor and are still forming by complex interactions of marine microorganisms, manganese dissolved in seawater, and chemical processes on the seabed. Manganese is ubiquitous in soil, water, and air. It occurs most often in solid form but can become soluble under acidic conditions. Manganese mining, like any activity that disturbs large areas of Earth’s surface, has the potential to produce increases in manganese concentrations that could be harmful to humans or the environment if not properly controlled. Although manganese is an essential nutrient for humans and most other organisms, overexposure can lead to neurotoxicity in humans. Workers at manganese mining and processing facilities have the greatest potential to inhale manganese-rich dust. Without proper protective equipment, these workers may develop a permanent neurological disorder known as manganism. Each manganese mine is unique and presents its own suite of potential hazards and preventative measures. Likewise, various nations have their own sets of standards to ensure safe mining, isolation of mine waste, treatment of mine waters, and mine closure and restoration. Interest in mining trace metals contained in ferromanganese nodules and crusts on the seabed has increased rapidly in the past decade. Prime areas for future research include overcoming the technological challenges presented by mining as deep as 6,500 meters below sea level and understanding and mitigating the potential impacts of seabed mining on marine ecosystems.

Professional Paper↗
USGS2023

Six years of fluvial response to a large dam removal on the Carmel River, California, USA

Measuring river response to dam removal affords a rare, important opportunity to study fluvial response to sediment pulses on a large field scale. We present a before–after/control–impact study of the Carmel River, California, measuring fluvial geomorphic and grain-size evolution over 8 years, six of which postdated removal of a 32 m-high dam (one of the largest dams removed worldwide) and included 11 flow events exceeding the 2-year flood magnitude. We find that the reservoir-sediment pulse following dam removal was relatively small (97 000 ± 24 000 t over 4 years), owing to deliberate reservoir-sediment stabilization. Scaled to the size of the Carmel River watershed and compared against long-term bedrock denudation rates, the post-dam-removal sediment release was slightly less than the annualized long-term sediment export from this basin. New sediment transited >30 km to the river mouth in less than 2 years, assisted by floods 2 and 4 years after dam removal. The sediment pulse fined the downstream riverbed while causing mostly low-magnitude bed-elevation changes: commonly 0.5 to 1 m or smaller, occurring as discontinuous sediment patches or interstitial deposits, aside from the filling and subsequent partial scour of deep pools. There was no major geomorphic reset downstream from the dam site. Geomorphic changes were driven almost entirely by flow rather than by the modest increase in sediment supply, in contrast to recent examples from other large dam removals. The relatively minor disturbance caused by dam removal on the Carmel River is likely analogous to many future dam removals: a relatively small sediment pulse after deliberate limitation of reservoir-sediment erosion, and with an upstream dam remaining in place. Thus, a large dam removal need not lead to major downstream impacts.

California↗
USGS2005

Regional landslide-hazard assessment for Seattle, Washington, USA

Landslides are a widespread, frequent, and costly hazard in Seattle and the Puget Sound area of Washington State, USA. Shallow earth slides triggered by heavy rainfall are the most common type of landslide in the area; many transform into debris flows and cause significant property damage or disrupt transportation. Large rotational and translational slides, though less common, also cause serious property damage. The hundreds of landslides that occurred during the winters of 1995-96 and 1996-97 stimulated renewed interest by Puget Sound communities in identifying landslide-prone areas and taking actions to reduce future landslide losses. Informal partnerships between the U.S. Geological Survey (USGS), the City of Seattle, and private consultants are focusing on the problem of identifying and mapping areas of landslide hazard as well as characterizing temporal aspects of the hazard. We have developed GIS-based methods to map the probability of landslide occurrence as well as empirical rainfall thresholds and physically based methods to forecast times of landslide occurrence. Our methods for mapping landslide hazard zones began with field studies and physically based models to assess relative slope stability, including the effects of material properties, seasonal groundwater levels, and rainfall infiltration. We have analyzed the correlation between historic landslide occurrence and relative slope stability to map the degree of landslide hazard. The City of Seattle is using results of the USGS studies in storm preparedness planning for emergency access and response, planning for development or redevelopment of hillsides, and municipal facility planning and prioritization. Methods we have developed could be applied elsewhere to suit local needs and available data.

Landslides↗
USGS2022

Regional-scale mapping of landscape response to extreme precipitation using repeat lidar and object-based image analysis

Extreme precipitation events may cause flooding, slope failure, erosion, deposition, and damage to infrastructure over a regional scale, but the impacts of these events are often difficult to fully characterize. Regional-scale landscape change occurred during an extreme rain event in June 2012 in northeastern Minnesota. Landscape change was documented by 8,000 km 2 of airborne lidar data collected before and after the event. Following improved alignment of the lidar point data and reducing error using insight from analysis of extensive stable areas, elevation differences were classified into map objects representing geomorphic change in relation to process and landscape position using object-based image analysis. This remote mapping compares favorably to field and imagery-based mapping and provides the basis for volumetric sediment budgeting. Elevation differences in these objects indicate that 4.5 × 10 6 ± 1.0 × 10 6 m 3 of sediment was eroded in the study area. Of this, 2.5 × 10 6 ± 3.3 × 10 5 m 3 was deposited in deposits on hillslopes and valley floors, and 2.0 × 10 6 ± 4.6 × 10 5 m 3 were removed from watersheds and exported to the Saint Louis River Estuary and Lake Superior. Multivariate logistic regression analysis emphasized that topographic slope and presence of glaciolacustrine clay lithology are the primary control on landslide occurrence, and landslides occur most frequently on slopes within tens of meters of stream channels. These results provide the basis to anticipate the impacts of similar future storm events. Because precipitation events are forecast to continue to increase in frequency and intensity owing to climate change, characterizing and anticipating their effects may support hazard planning.

Minnesota↗
USGS2024

Lake water temperature modeling in an era of climate change: Data sources, models, and future prospects

Lake thermal dynamics have been considerably impacted by climate change, with potential adverse effects on aquatic ecosystems. To better understand the potential impacts of future climate change on lake thermal dynamics and related processes, the use of mathematical models is essential. In this study, we provide a comprehensive review of lake water temperature modeling. We begin by discussing the physical concepts that regulate thermal dynamics in lakes, which serve as a primer for the description of process-based models. We then provide an overview of different sources of observational water temperature data, including in situ monitoring and satellite Earth observations, used in the field of lake water temperature modeling. We classify and review the various lake water temperature models available, and then discuss model performance, including commonly used performance metrics and optimization methods. Finally, we analyze emerging modeling approaches, including forecasting, digital twins, combining process-based modeling with deep learning, evaluating structural model differences through ensemble modeling, adapted water management, and coupling of climate and lake models. This review is aimed at a diverse group of professionals working in the fields of limnology and hydrology, including ecologists, biologists, physicists, engineers, and remote sensing researchers from the private and public sectors who are interested in understanding lake water temperature modeling and its potential applications.

Review of Geophysics↗
USGS2024

Constraints from GPS measurements on plate coupling within the Makran subduction zone and tsunami scenarios in the western Indian Ocean

Plate-coupling estimates and previous seismicity indicate that portions of the Makran megathrust of southern Pakistan and Iran are partially coupled and have the potential to produce future magnitude 7+ earthquakes. However, the GPS observations needed to constrain coupling models are sparse and lead to an incomplete understanding of regional earthquake and tsunami hazard. In this study, we assess GPS velocities for plate coupling of the Makran subduction zone with specific attention to model resolution and the accretionary prism rheology. We use finite element model-derived Green's functions to invert for the interseismic slip deficit under both elastic and viscoelastic Earth assumptions. We use the model resolution matrix to characterize plate-coupling scenarios that are consistent with the limited spatial resolution afforded by GPS observations. We then forward model the corresponding tsunami responses at major coastal cities within the western Indian Ocean basin. Our plate-coupling results show potential segmentation of the megathrust with varying coupling from west to east, but do not rule out a scenario where the entire length of the megathrust could rupture in a single earthquake. The full subduction zone rupture scenarios suggest that the Makran may be able to produce earthquakes up to M w 9.2. The corresponding tsunami model from the largest earthquake event ( M w 9.2) estimates maximum wave heights reaching 2–5 m at major port cities in the northern Arabian Sea region. Cities on the west coast of India are less affected (1–2 m). Coastlines bounding eastern Africa, and the Strait of Hormuz, are the least affected (<1 m).

Geophysical Journal International↗
USGS2011

USGS St. Petersburg Coastal and Marine Science Center--Research activities in the U.S. Virgin Islands

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center in Florida investigates earth-science processes related to coastal and marine environments as well as to societal implications of natural hazards, resource sustainability, and environmental change. The Center is conducting ongoing research in and around the U.S. Virgin Islands that is providing baseline information for resource management and for assessing the health of and environmental changes to vital ecosystems such as coral reefs. In particular, projects are improving the understanding of coral health, advancing the ability to forecast future changes in coral reef ecosystems, and acquiring topographic data for use in inventorying, monitoring, and conserving coastal and marine environments.

Virgin Islands↗
USGS2021

California and Landsat

California has remarkable geographic diversity, from 1,100 miles of Pacific shoreline to 33 million acres of trees, including its famous redwood forests along the Pacific Coast Highway, U.S. Route 101. And although California’s nickname is “The Golden State," it may also deserve the title of “The Extreme State.” Mount Whitney, the highest peak in the conterminous United States, stands at 14,494 feet above sea level in the Sierra Nevada mountain range. Just 2.5 hours away by car, Death Valley’s Badwater Basin boasts the lowest point in the United States: 282 feet below sea level. Although hundreds of inches of snow fall on Mount Whitney each year, the rainfall in Death Valley, commonly called the hottest place on Earth, averages less than 2 inches. California is the most populous U.S. State with 39 million residents, 26 million of whom live near the coast. It’s also the most agriculturally productive State, raising a variety of fruits, vegetables, nuts, grains, grasses, and flowers in addition to dairy and livestock. Although climate change affects many of these people, production, and places, Landsat can help agencies and residents monitor their landscapes and plan for a resilient future.

California↗
USGS2003

Economic drivers of mineral supply

The debate over the adequacy of future supplies of mineral resources continues in light of the growing use of mineral-based materials in the United States. According to the U.S. Geological Survey, the quantity of new materials utilized each year has dramatically increased from 161 million tons2 in 1900 to 3.2 billion tons in 2000. Of all the materials used during the 20th century in the United States, more than half were used in the last 25 years. With the Earth?s endowment of natural resources remaining constant, and increased demand for resources, economic theory states that as depletion approaches, prices rise. This study shows that many economic drivers (conditions that create an economic incentive for producers to act in a particular way) such as the impact of globalization, technological improvements, productivity increases, and efficient materials usage are at work simultaneously to impact minerals markets and supply. As a result of these economic drivers, the historical price trend of mineral prices3 in constant dollars has declined as demand has risen. When price is measured by the cost in human effort, the price trend also has been almost steadily downward. Although the United States economy continues its increasing mineral consumption trend, the supply of minerals has been able to keep pace. This study shows that in general supply has grown faster than demand, causing a declining trend in mineral prices.

Open-File Report↗