SEARCH · USGS Science

Results for “The Energy Journal”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26Linked to original sources

USGS1999

Oxidation and mobilization of selenium by nitrate in irrigation drainage

Selenium (Se) can be oxidized by nitrate (NO − 3 ) from irrigation on Cretaceous marine shale in western Colorado. Dissolved Se concentrations are positively correlated with dissolved NO − 3 concentrations in surface water and ground water samples from irrigated areas. Redox conditions dominate in the mobilization of Se in marine shale hydrogeologic settings; dissolved Se concentrations increase with increasing platinum-electrode potentials. Theoretical calculations for the oxidation of Se by NO − 3 and oxygen show favorable Gibbs free energies for the oxidation of Se by NO − 3 , indicating NO − 3 can act as an electron acceptor for the oxidation of Se. Laboratory batch experiments were performed by adding Mancos Shale samples to zero-dissolved-oxygen water containing 0, 5, 50, and 100 mg/L NO − 3 as N (mg N/L). Samples were incubated in airtight bottles at 25°C for 188 d; samples collected from the batch experiment bottles show increased Se concentrations over time with increased NO − 3 concentrations. Pseudo first-order rate constants for NO − 3 oxidation of Se ranged from 0.0007 to 0.0048/d for 0 to 100 mg N/L NO − 3 concentrations, respectively. Management of N fertilizer applications in Cretaceous shale settings might help to control the oxidation and mobilization of Se and other trace constituents into the environment.

Journal of Environmental Quality↗

USGS1988

Response of urinary hydroxyproline to dietary protein and fasting in white-tailed deer

The effects of dietary protein, fasting, and refeeding on urinary hydroxyproline of nine captive female white-tailed deer ( Odocoileus virginianus ) were examined from 23 February to 3 May 1984 in northern Minnesota. In the fasted group, mean hydroxyproline: creatinine (OHP:C) was greater ( P < 0.05) at week 4 compared to baseline at week 0. Between fasted deer and deer fed high protein-high energy (HPHE) and low protein-high energy (LPHE) diets, no difference in OHP:C ratios was detected during the initial 4 wk of the study. Urinary OHP:C ratios were significantly ( P < 0.05) greater in the fasted group during refeeding, concomitant with greater feed consumption and weight gain. There was also a significant ( P < 0.02) time effect in the fasted-refed group; OHP:C ratios increased during these two phases of the study. There was no difference between the HPHE and LPHE fed deer in renal OHP excretion. However, mean OHP:C ratios in yearlings (16.8 ± 2.2) were greater ( P <0.001) than in the adults (7.5 ± 1.2) of those groups, indicating a higher collagen turnover rate. Urinary OHP:C shows potential as an indicator of growth and starvation, and the data presented may serve as reference values.

Journal of Wildlife Diseases↗

USGS2013

Size-dependent trophic patterns of pallid sturgeon and shovelnose sturgeon in a large river system

This study compared patterns of δ 15 N and δ 13 C enrichment of pallid sturgeon Scaphirhynchus albus and shovelnose sturgeon S. platorynchus in the Missouri River, United States, to infer their trophic position in a large river system. We examined enrichment and energy flow for pallid sturgeon in three segments of the Missouri River (Montana/North Dakota, Nebraska/South Dakota, and Nebraska/Iowa) and made comparisons between species in the two downstream segments (Nebraska/South Dakota and Nebraska/Iowa). Patterns in isotopic composition for pallid sturgeon were consistent with gut content analyses indicating an ontogenetic diet shift from invertebrates to fish prey at sizes of >500-mm fork length (FL) in all three segments of the Missouri River. Isotopic patterns revealed shovelnose sturgeon did not experience an ontogenetic shift in diet and used similar prey resources as small (<500-mm FL) pallid sturgeon in the two downstream segments. We found stable isotope analysis to be an effective tool for evaluating the trophic position of sturgeons within a large river food web.

Missouri River↗

USGS2001

New general pore size distribution model by classical thermodynamics application: Activated carbon

A model is developed using classical thermodynamics to characterize pore size distributions (PSDs) of materials containing micropores and mesopores. The thermal equation of equilibrium adsorption (TEEA) is used to provide thermodynamic properties and relate the relative pore filling pressure of vapors to the characteristic pore energies of the adsorbent/adsorbate system for micropore sizes. Pore characteristic energies are calculated by averaging of interaction energies between adsorbate molecules and adsorbent pore walls as well as considering adsorbate-adsorbate interactions. A modified Kelvin equation is used to characterize mesopore sizes by considering variation of the adsorbate surface tension and by excluding the adsorbed film layer for the pore size. The modified-Kelvin equation provides similar pore filling pressures as predicted by density functional theory. Combination of these models provides a complete PSD of the adsorbent for the micropores and mesopores. The resulting PSD is compared with the PSDs from Jaroniec and Choma and Horvath and Kawazoe models as well as a first-order approximation model using Polanyi theory. The major importance of this model is its basis on classical thermodynamic properties, less simplifying assumptions in its derivation compared to other methods, and ease of use.

Journal of Environmental Engineering↗

USGS2022

Estimating allowable take for an increasing bald eagle population in the United States

Effectively managing take of wildlife resulting from human activities poses a major challenge for applied conservation. Demographic data essential to decisions regarding take are often expensive to collect and are either not available or based on limited studies for many species. Therefore, modeling approaches that efficiently integrate available information are important to improving the scientific basis for sustainable take thresholds. We used the prescribed take level (PTL) framework to estimate allowable take for bald eagles ( Haliaeetus leucocephalus ) in the conterminous United States. We developed an integrated population model (IPM) that incorporates multiple sources of information and then use the model output as the scientific basis for components of the PTL framework. Our IPM is structured to identify key parameters needed for the PTL and to quantify uncertainties in those parameters at the scale at which the United States Fish and Wildlife Service manages take. Our IPM indicated that mean survival of birds >1 year old was high and precise (0.91, 95% CI = 0.90–0.92), whereas mean survival of first-year eagles was lower and more variable (0.69, 95% CI = 0.62–0.78). We assumed that density dependence influenced recruitment by affecting the probability of breeding, which was highly imprecise and estimated to have declined from approximately 0.988 (95% CI = 0.985–0.993) to 0.66 (95% CI = 0.34–0.99) between 1994 and 2018. We sampled values from the posterior distributions of the IPM for use in the PTL and estimated that allowable take (e.g., permitted take for energy development, incidental collisions with human made structures, or removal of nests for development) ranged from approximately 12,000 to 20,000 individual eagles depending on risk tolerance and form of density dependence at the scale of the conterminous United States excluding the Southwest. Model-based thresholds for allowable take can be inaccurate if the assumptions of the underlying framework are not met, if the influence of permitted take is under-estimated, or if undetected population declines occur from other sources. Continued monitoring and use of the IPM and PTL frameworks to identify key uncertainties in bald eagle population dynamics and management of allowable take can mitigate this potential bias, especially where improved information could reduce the risk of permitting non-sustainable take.

Journal of Wildlife Management↗

USGS2016

Nutrients in the nexus

Synthetic nitrogen (N) fertilizer has enabled modern agriculture to greatly improve human nutrition during the twentieth century, but it has also created unintended human health and environmental pollution challenges for the twenty-first century. Averaged globally, about half of the fertilizer-N applied to farms is removed with the crops, while the other half remains in the soil or is lost from farmers’ fields, resulting in water and air pollution. As human population continues to grow and food security improves in the developing world, the dual development goals of producing more nutritious food with low pollution will require both technological and socio-economic innovations in agriculture. Two case studies presented here, one in sub-Saharan Africa and the other in Midwestern United States, demonstrate how management of nutrients, water, and energy is inextricably linked in both small-scale and large-scale food production, and that science-based solutions to improve the efficiency of nutrient use can optimize food production while minimizing pollution. To achieve the needed large increases in nutrient use efficiency, however, technological developments must be accompanied by policies that recognize the complex economic and social factors affecting farmer decision-making and national policy priorities. Farmers need access to affordable nutrient supplies and support information, and the costs of improving efficiencies and avoiding pollution may need to be shared by society through innovative policies. Success will require interdisciplinary partnerships across public and private sectors, including farmers, private sector crop advisors, commodity supply chains, government agencies, university research and extension, and consumers.

Journal of Environmental Studies and Sciences↗

USGS2023

Monitoring sediment transport pathways from an artificial nearshore berm, South Padre Island, Texas, USA, August 2018 to November 2019: Implications for coastal management

During August 2018 – November 2019, the transport pathways of dredge material from a specially constructed nearshore feeder berm were investigated as part of a collaborative study by the City of South Padre Island, U.S. Army Corps of Engineers–Galveston District, U.S. Geological Survey, Partrac GeoMarine Inc., and Texas A&M University, into the efficacy of beneficial use dredge material (BUDM) as a method of replenishing the beach profile and shoreface at South Padre Island, Texas with sediment. Dual-signature (fluorescent and ferrimagnetic) tracer particles, designed to be hydraulically equivalent to the dredge material, were placed on the berm, and a sampling program was initiated to monitor the spatiotemporal movement of tracer particles under the influence of the prevailing hydrodynamic regime. Wave and current data were collected and were used together with available metocean data to identify the forcing mechanisms of sediment transport; improved understanding garnered from the consideration of multiple datasets can be used to inform future coastal management decisions. Tracer analysis results indicated low magnitude, shoreward transport of dredge material from the berm and along shore transport in both northerly and southerly directions. Small amounts of tracer detected in beach face samples demonstrated connectivity between the constructed feeder berm and the shoreface. However, the generally low tracer concentration within beach face samples indicated low rates of sediment transport for berm sediments, and a low magnitude sediment transport pathway from the berm directly to the beach face, with possible storage of sediment in the nearshore bar system. Given that the berm was at or beyond the closure depth and considering the relatively weak prevailing near bottom hydrodynamic conditions, the potential for sediment to be mobilized and transported during the study period was generally low. Periods of higher energy waves, driven by north-northwest winds, were identified as a key driver of sediment transport but due to the infrequent nature of these events the sediment transport regime across the area of interest was temporally limited. Longshore movement of sediment was both north and south, mainly dependent on prevailing wind directions and resulting longshore currents. We discuss implications for coastal zone management and the use of feeder berms as an artificial beach nourishment mechanism to replenish sediments lost by coastal erosional processes. The insight into nearshore emplacement of material can be used by local governments and coastal managers to optimize the efficacy of berm emplacement and implement such schemes as a cost-effective nourishment option, or when onshore placement of material is not feasible.

Texas↗

USGS2000

Seismovolcanic signals at Deception Island volcano, Antarctica: Wave field analysis and source modeling

The seismovolcanic signals associated with the volcanic activity of Deception Island (Antarctica), recorded during three Antarctic summers (1994–1995, 1995–1996 and 1996–1997), are analyzed using a dense small-aperture (500 m) seismic array. The visual and spectral classification of the seismic events shows the existence of long-period and hybrid isolated seismic events, and of low-frequency, quasi-monochromatic and spasmodic continuous tremors. All spectra have the highest amplitudes in the frequency band between 1 and 4 Hz, while hybrids and spasmodic tremors have also significant amplitudes in the high-frequency band (4–10 Hz). The array analysis indicates that almost all the well-correlated low-frequency signals share similar array parameters (slowness and back azimuth) and have the same source area, close to the array site. The polarization analysis shows that phases at high-frequency are mostly composed of P waves, and those phases dominated by low frequencies can be interpreted as surface waves. No clear shear waves are evidenced. From the energy evaluation, we have found that the reduced displacement values for surface and body waves are confined in a narrow interval. Volcano-tectonic seismicity is located close to the array, at a depth shallower than 1 km. The wave-field properties of the seismovolcanic signals allow us to assume a unique source model, a shallow resonating fluid-filled crack system at a depth of some hundreds of meters. All of the seismic activity is interpreted as the response of a reasonably stable stationary geothermal process. The differences observed in the back azimuth between low and high frequencies are a near-field effect. A few episodes of the degassification process in an open conduit were observed and modeled with a simple organ pipe.

Journal of Geophysical Research: Solid Earth↗

USGS2002

A landscape ecology approach to assessing development impacts in the tropics: A geothermal energy example in Hawaii

Geographic information systems (GIS) are increasingly being used in environmental impact assessments (EIA) because GIS is useful for analysing spatial impacts of various development scenarios. Spatially representing these impacts provides another tool for landscape ecology in environmental and geographical investigations by facilitating analysis of the effects of landscape patterns on ecological processes and examining change over time. Landscape ecological principles are applied in this study to a hypothetical geothermal development project on the Island of Hawaii. Some common landscape pattern metrics were used to analyse dispersed versus condensed development scenarios and their effect on landscape pattern. Indices of fragmentation and patch shape did not appreciably change with additional development. The amount of forest to open edge, however, greatly increased with the dispersed development scenario. In addition, landscape metrics showed that a human disturbance had a greater simplifying effect on patch shape and also increased fragmentation than a natural disturbance. The use of these landscape pattern metrics can advance the methodology of applying GIS to EIA.

Singapore Journal of Tropical Geography↗

USGS2009

Seismic wave triggering of nonvolcanic tremor, episodic tremor and slip, and earthquakes on Vancouver Island

[1] We explore the physical conditions that enable triggering of nonvolcanic tremor and earthquakes by considering local seismic activity on Vancouver Island, British Columbia during and immediately after the arrival of large-amplitude seismic waves from 30 teleseismic and 17 regional or local earthquakes. We identify tremor triggered by four of the teleseismic earthquakes. The close temporal and spatial proximity of triggered tremor to ambient tremor and aseismic slip indicates that when a fault is close to or undergoing failure, it is particularly susceptible to triggering of further events. The amplitude of the triggering waves also influences the likelihood of triggering both tremor and earthquakes such that large amplitude waves triggered tremor in the absence of detectable aseismic slip or ambient tremor. Tremor and energy radiated from regional/local earthquakes share the same frequency passband so that tremor cannot be identified during these smaller, more frequent events. We confidently identify triggered local earthquakes following only one teleseism, that with the largest amplitude, and four regional or local events that generated vigorous aftershock sequences in their immediate vicinity. Earthquakes tend to be triggered in regions different from tremor and with high ambient seismicity rates. We also note an interesting possible correlation between large teleseismic events and episodic tremor and slip (ETS) episodes, whereby ETS events that are “late” and have built up more stress than normal are susceptible to triggering by the slight nudge of the shaking from a large, distant event, while ETS events that are “early” or “on time” are not.

Vancouver Island↗

USGS2018

Bed shear stress estimation under wave conditions using near-bottom measurements: Comparison of methods

Understanding the influence of waves on bed shear stress is critical for predicting morphodynamical behaviours in coastal areas. Near-bed flow was measured on the middle and lower intertidal mudflats along the Jiangsu coast, China, using a three-dimensional acoustic velocimeter that collected a 3.5-cm vertical profile at 1mm resolution and sample rate of 25 Hz. On the lower and middle tidal flats, velocities from ~2.5-6 cmab (cm above bed) and ~0-3 cmab were measured, respectively. Current-induced bed shear stresses were calculated from turbulent kinetic energy (TKE) at the 11th measurement layer (i.e., 5.1 cm below the probe) using wave-turbulence decomposition and from a logarithmic fit to the horizontal mean velocity profile (LP). A wave boundary layer extended from the bed up to 3 cmab when the significant wave height was 0.23 m; when it was present the near-bed mean velocity profile was non-logarithmic. Waves suppress the development of a vertical velocity gradient and lead to an overestimation of bed shear stress when calculated using the log profile assumption. The TKE method is more accurate than the LP method when waves are present and measurements are at least partially within the wave boundary layer. Accurate calculation of current-induced bed shear stress depends on probe height and wave conditions.

Jiangsu coast↗

USGS2022

Seismic site characterization with shear wave (SH) reflection and refraction methods

Reflection and critically refracted seismic methods use traveltime measurements of body waves propagating between a source and a series of receivers on the ground surface to calculate subsurface velocities. Body wave energy is refracted or reflected at boundaries where there is a change in seismic impedance, defined as the product of material density and seismic velocity. This article provides practical guidance on the use of horizontally propagating shear wave (SH-wave) refraction and reflection methods to determine shear wave velocity as a function of depth for near-surface seismic site characterizations. Method principles and the current state of engineering practice are reviewed, along with discussions of limitations and uncertainty assessments. Typical data collection procedures are described using basic survey equipment, along with information on more advanced applications and emerging technologies. Eight case studies provide examples of the techniques in real-world seismic site characterizations performed in a variety of geological settings.

Journal of Seismology↗

USGS2009

Three-dimensional benchmark for variable-density flow and transport simulation: matching semi-analytic stability modes for steady unstable convection in an inclined porous box

This benchmark for three-dimensional (3D) numerical simulators of variable-density groundwater flow and solute or energy transport consists of matching simulation results with the semi-analytical solution for the transition from one steady-state convective mode to another in a porous box. Previous experimental and analytical studies of natural convective flow in an inclined porous layer have shown that there are a variety of convective modes possible depending on system parameters, geometry and inclination. In particular, there is a well-defined transition from the helicoidal mode consisting of downslope longitudinal rolls superimposed upon an upslope unicellular roll to a mode consisting of purely an upslope unicellular roll. Three-dimensional benchmarks for variable-density simulators are currently (2009) lacking and comparison of simulation results with this transition locus provides an unambiguous means to test the ability of such simulators to represent steady-state unstable 3D variable-density physics.

Hydrogeology Journal↗

USGS2018

Pore-types and pore-network evolution in Upper Devonian-Lower Mississippian Woodford and Mississippian Barnett mudstones: Insights from laboratory thermal maturation and organic petrology

Pore-evolution models from immature organic-matter (OM) -rich Barnett (0.42%R o ) and Woodford (0.49%R o ) mudstones were compared with models previously developed from low-maturity OM-lean Boquillas (Eagle Ford-equivalent) mudstones to investigate whether (1) different mineralogy (siliceous vs. calcareous) exerts different catalytic and sorption effects and influences OM-pore origin and evolution; and (2) different types of macerals show different OM pore evolution history. Laboratory gold-tube pyrolysis, scanning electron microscopy (SEM) and thin-section petrography, organic petrography, and geochemical characterization were used to investigate the role of bulk mineralogy, maceral type, and thermal maturation on OM-pore evolution. Results suggest that mineralogy has little impact on OM-pore development and evolution. Macerals, identified using both SEM (platy OM, particulate OM, organic–mineral admixtures, Tasmanites ) and organic petrology (vitrinite, inertinite, amorphous organic matter [AOM]/bituminite, telalginite [ Leiosphaeridia , Tasmanites ]), do affect the origin and evolution of OM pores owing to differences in chemical compositions, generation kinetics, and activation-energy distributions between Tasmanites , matrix bituminite, and other types of macerals. Leiosphaeridia and Tasmanites in Woodford mudstone samples exhibit a delay in onset and a shorter period of petroleum generation and pore development compared to the matrix bituminite in the Barnett and Woodford mudstone samples. Pre-oil solid bitumen was observed to have migrated into initial primary mineral pore networks at the bitumen generation stage in both Barnett and Woodford samples. At higher levels of thermal maturation, the volume of primary mineral pores decreases and the pore volume composed of modified mineral pores and OM pores becomes greater. Pore evolution and pore-type heterogeneity in these mudstones is a function of the initial mineral pore network, types of kerogen and macerals, and generation kinetics of individual macerals upon thermal maturation.

Oklahoma↗

USGS1995

Repertoire, structure, and individual variation of vocalizations in the sea otter

Vocalizations of the California sea otter ( Enhydra lutris nereis ) were recorded from wild and captive adults and young and analyzed spectrographically. Parameters measured from the sonagrams included fundamental frequency, duration, maximum frequency, intercall interval, and the location and amplitude of energy peaks. We identified 10 basic vocal categories, one of which consisted of graded signals. The contexts for each call, when known or suspected, are described. Discriminant analysis of the spectrographic parameters for the scream call showed significant differences among individuals for adult females and young. Using only the parameters quantified, each call was assigned correctly to the individual that produced it with 80% accuracy for mothers and 75% for young, thus, indicating that the potential exists for individual vocal recognition in the sea otter. The sea otter's vocal repertoire is similar in complexity to that of certain pinnipeds, but may be less complex than that of several species of social cetaceans and primates. In general, the sea otter's vocal patterns have characteristics thought to be most suitable for short-range communication among familiar individuals.

Journal of Mammalogy↗

USGS1990

Coal in sub-Saharan-African countries undergoing desertification

Coal has been reported in 11 of the 16 sub-Saharan countries discussed in this appraisal: Mauritania, Senegal, Mali, Niger, Benin, Nigeria, Cameroon, Central African Republic, Sudan, Ethiopia, and Somalia. No coal occurrences have been reported in Gambia, Togo, Burkina, Chad, and Djibouti but coal may be present within these countries because neighboring countries do contain coal-bearing rocks. Most of these countries are undergoing desertification or will in the near future. Wood, directly or in the form of charcoal, constitutes two-thirds of the fuel used in Africa. Destruction of forest and shrub lands for fuel is occurring at an increasing rate because of desertification and increasing energy demands. The decline in biological productivity, coupled with concentration of population in areas where water is available and crops may be grown, leads to increasing shortages of wood for fuel. Part of the present and future energy needs of the sub-Saharan region could be met by use of indigenous coal and peat. Nine sedimentary basins, completely or partially within the sub-Saharan region, have the potential of either coal and/or peat deposits of economic value: 1- Senegal Basin, 2- Taoudeni Basin and Gao Trough, 3- Niger Basin, 4- Chad Basin, 5- Chari Basin, 6- Benue Trough (Depression), 7- Sudan Trough, 8- Plateau and Rift Belt, and 9- Somali Basin. Niger and Nigeria are the only countries in sub-Saharan Africa in which coal is presently being mined as a fuel source for powerplants and domestic use. Peat occurs in the deltas, lower river, and interdunal basin areas of Senegal, Mauritania, and Sudan. Peat can be used as an alternate fuel source and is currently being tested as a soil amendment in the agricultural sector.

Journal of African Earth Sciences↗

USGS2019

An ANCOVA model for porosity and its uncertainty for oil reservoirs based on TORIS dataset

Porosity is one of the most important parameters to assess in-place oil or gas in reservoirs, and to evaluate recovery from enhanced production operations. Since it is relatively well-established to determine porosity using different laboratory and field methods, its value is usually determined at many locations across a reservoir as part of the common practice to capture reservoir heterogeneity and the variability in values. This suite of measurements and the distribution of values are most valuable for probabilistic reservoir assessments, and for spatial modeling if the exact data locations are known. Despite the importance of individual measurements to set the range of values for probabilistic studies, it is not always possible to access these data due to confidentiality. In most cases, commercial or publicly available databases that assessments may rely on usually report only mean values of porosity, like any other reservoir data, or they may not report a value at all. This makes both quantifying the mean value and the uncertainty around it difficult for probabilistic assessments. In this study, the TORIS (Tertiary Oil Recovery Information System) dataset of the National Petroleum Council and the U.S. Department of Energy was used to model porosity and the uncertainty around predicted values. TORIS is an integrated dataset of production data, reservoir properties, and project databases of crude oil reservoirs in the United States. The model presented in the paper was based on ANCOVA (Analysis of Co-Variance) of data from 1038 reservoirs from the TORIS dataset for porosity prediction, validation and testing for quantitative and qualitative parameters that may be readily available in most cases, and to estimate uncertainty around the mean values. This model also explored association of porosity values to different parameters, and to different depositional systems and diagenetic overprint conditions. Furthermore, an ANN (Artificial Neural Network) model was created to compare the predicted values of both models. Results showed that the ANN model was able to represent more of the variability, however it lacked the insights that might be gained from the ANCOVA model.

Journal of Petroleum Science and Engineering↗

USGS2016

Deferrisoma paleochoriense sp. nov., a thermophilic, iron(III)-reducing bacterium from a shallow-water hydrothermal vent in the Mediterranean Sea

A novel thermophilic, anaerobic, mixotrophic bacterium, designated strain MAG-PB1 T , was isolated from a shallow-water hydrothermal vent system in Palaeochori Bay off the coast of the island of Milos, Greece. The cells were Gram-negative, rugose, short rods, approximately 1.0 μm long and 0.5 μm wide. Strain MAG-PB1 T grew at 30–70 °C (optimum 60 °C), 0–50 g NaCl l − 1 (optimum 15–20 g l − 1 ) and pH 5.5–8.0 (optimum pH 6.0). Generation time under optimal conditions was 2.5 h. Optimal growth occurred under chemolithoautotrophic conditions with H 2 as the energy source and CO 2 as the carbon source. Fe(III), Mn(IV), arsenate and selenate were used as electron acceptors. Peptone, tryptone, Casamino acids, sucrose, yeast extract, d -fructose, α- d -glucose and ( − )- d -arabinose also served as electron donors. No growth occurred in the presence of lactate or formate. The G+C content of the genomic DNA was 66.7 mol%. Phylogenetic analysis of the 16S rRNA gene sequence indicated that this organism is closely related to Deferrisoma camini , the first species of a recently described genus in the Deltaproteobacteria . Based on the 16S rRNA gene phylogenetic analysis and on physiological, biochemical and structural characteristics, the strain was found to represent a novel species, for which the name Deferrisoma palaeochoriense sp. nov. is proposed. The type strain is MAG-PB1 T ( = JCM 30394 T  = DSM 29363 T ).

Mediterranean Sea, Milos Island, Paleochori Bay↗