USGS Science⌕ Search

SEARCH · USGS Science

Results for “Remote Sensing Information”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26Linked to original sources

Characterization of errors in a coupled snow hydrology-microwave emission model

Traditional approaches to the direct estimation of snow properties from passive microwave remote sensing have been plagued by limitations such as the tendency of estimates to saturate for moderately deep snowpacks and the effects of mixed land cover within remotely sensed pixels. An alternative approach is to assimilate satellite microwave emission observations directly, which requires embedding an accurate microwave emissions model into a hydrologic prediction scheme, as well as quantitative information of model and observation errors. In this study a coupled snow hydrology [Variable Infiltration Capacity (VIC)] and microwave emission [Dense Media Radiative Transfer (DMRT)] model are evaluated using multiscale brightness temperature (TB) measurements from the Cold Land Processes Experiment (CLPX). The ability of VIC to reproduce snowpack properties is shown with the use of snow pit measurements, while TB model predictions are evaluated through comparison with Ground-Based Microwave Radiometer (GBMR), air-craft [Polarimetric Scanning Radiometer (PSR)], and satellite [Advanced Microwave Scanning Radiometer for the Earth Observing System (AMSR-E)] TB measurements. Limitations of the model at the point scale were not as evident when comparing areal estimates. The coupled model was able to reproduce the TB spatial patterns observed by PSR in two of three sites. However, this was mostly due to the presence of relatively dense forest cover. An interesting result occurs when examining the spatial scaling behavior of the higher-resolution errors; the satellite-scale error is well approximated by the mode of the (spatial) histogram of errors at the smaller scale. In addition, TB prediction errors were almost invariant when aggregated to the satellite scale, while forest-cover fractions greater than 30% had a significant effect on TB predictions. ?? 2008 American Meteorological Society.

Journal of Hydrometeorology↗

Evaluating the potential for efficient, UAS-based reach-scale mapping of river channel bathymetry from multispectral images

Introduction: Information on spatial patterns of water depth in river channels is valuable for numerous applications, but such data can be difficult to obtain via traditional field methods. Ongoing developments in remote sensing technology have enabled various image-based approaches for mapping river bathymetry; this study evaluated the potential to retrieve depth from multispectral images acquired by an uncrewed aircraft system (UAS). Methods: More specifically, we produced depth maps for a 4 km reach of a clear-flowing, relatively shallow river using an established spectrally based algorithm, Optimal Band Ratio Analysis. To assess accuracy, we compared image-derived estimates to direct measurements of water depth. The field data were collected by wading and from a boat equipped with an echo sounder and used to survey cross sections and a longitudinal profile. We partitioned our study area along the Sacramento River, California, USA, into three distinct sub-reaches and acquired a separate image for each one. In addition to the typical, self-contained, per-image depth retrieval workflow, we also explored the possibility of exporting a relationship between depth and reflectance calibrated using data from one site to the other two sub-reaches. Moreover, we evaluated whether sampling configurations progressively more sparse than our full field survey could still provide sufficient calibration data for developing robust depth retrieval models. Results: Our results indicate that under favorable environmental conditions like those observed on the Sacramento River during low flow, accurate, precise depth maps can be derived from images acquired by UAS, not only within a sub-reach but also across multiple, adjacent sub-reaches of the same river. Discussion: Moreover, our findings imply that the level of effort invested in obtaining field data for calibration could be significantly reduced. In aggregate, this investigation suggests that UAS-based remote sensing could facilitate highly efficient, cost-effective, operational mapping of river bathymetry at the reach scale in clear-flowing streams.

California↗

Evaluation of airborne lidar elevation surfaces for propagation of coastal inundation: the importance of hydrologic connectivity

Detailed information about coastal inundation is vital to understanding dynamic and populated areas that are impacted by storm surge and flooding. To understand these natural hazard risks, lidar elevation surfaces are frequently used to model inundation in coastal areas. A single-value surface method is sometimes used to inundate areas in lidar elevation surfaces that are below a specified elevation value. However, such an approach does not take into consideration hydrologic connectivity between elevation grids cells resulting in inland areas that should be hydrologically connected to the ocean, but are not. Because inland areas that should drain to the ocean are hydrologically disconnected by raised features in a lidar elevation surface, simply raising the water level to propagate coastal inundation will lead to inundation uncertainties. We took advantage of this problem to identify hydrologically disconnected inland areas to point out that they should be considered for coastal inundation, and that a lidar-based hydrologic surface should be developed with hydrologic connectivity prior to inundation analysis. The process of achieving hydrologic connectivity with hydrologic-enforcement is not new, however, the application of hydrologically-enforced lidar elevation surfaces for improved coastal inundation mapping as approached in this research is innovative. In this article, we propagated a high-resolution lidar elevation surface in coastal Staten Island, New York to demonstrate that inland areas lacking hydrologic connectivity to the ocean could potentially be included in inundation delineations. For inland areas that were hydrologically disconnected, we evaluated if drainage to the ocean was evident, and calculated an area exceeding 11 ha (~0.11 km 2 ) that could be considered in inundation delineations. We also assessed land cover for each inland area to determine the type of physical surfaces that would be potentially impacted if the inland areas were considered as part of a coastal inundation. A visual analysis indicated that developed, medium intensity and palustrine forested wetland land cover types would be impacted for those locations. This article demonstrates that hydrologic connectivity is an important factor to consider when inundating a lidar elevation surface. This information is needed for inundation monitoring and management in sensitive coastal regions.

Remote Sensing↗

Evaluation of the initial thematic output from a continuous change-detection algorithm for use in automated operational land-change mapping by the U.S. Geological Survey

The U.S. Geological Survey (USGS) has begun the development of operational, 30-m resolution annual thematic land cover data to meet the needs of a variety of land cover data users. The Continuous Change Detection and Classification (CCDC) algorithm is being evaluated as the likely methodology following early trials. Data for training and testing of CCDC thematic maps have been provided by the USGS Land Cover Trends (LC Trends) project, which offers sample-based, manually classified thematic land cover data at 2755 probabilistically located sample blocks across the conterminous United States. These samples represent a high quality, well distributed source of data to train the Random Forest classifier invoked by CCDC. We evaluated the suitability of LC Trends data to train the classifier by assessing the agreement of annual land cover maps output from CCDC with output from the LC Trends project within 14 Landsat path/row locations across the conterminous United States. We used a small subset of circa 2000 data from the LC Trends project to train the classifier, reserving the remaining Trends data from 2000, and incorporating LC Trends data from 1992, to evaluate measures of agreement across time, space, and thematic classes, and to characterize disagreement. Overall agreement ranged from 75% to 98% across the path/rows, and results were largely consistent across time. Land cover types that were well represented in the training data tended to have higher rates of agreement between LC Trends and CCDC outputs. Characteristics of disagreement are being used to improve the use of LC Trends data as a continued source of training information for operational production of annual land cover maps.

Remote Sensing↗

Crop water productivity estimation with hyperspectral remote sensing

Crop water productivity (CWP) is the ratio of accumulated crop biomass or yield (Y) to the water utilized to produce it, which is typically estimated using transpiration (ET C ). CWP is an important metric to test and monitor water-saving strategies in agroecosystems across the globe. Red and near-infrared broadbands have been used to estimate CWP, because they capture biophysical constraints based on crop-light interaction principles at pixel level (e.g., 30-meter resolution) over large areas through time. Hyperspectral remote sensing, which allows for the more precise measurement of crop-light interactions at higher spectral resolution, should in theory provide higher accuracy in CWP estimation but has been underutilized by the remote sensing community due to computational challenges and lack of availability. In this study, a simple methodology is presented to demonstrate how CWP could be estimated using hyperspectral remote sensing. Due to a lack of hyperspectral data, Landsat-7 Enhanced Thematic Mapper Plus (ETM+) data were used for the demonstration. Landsat is a broadband sensor that provides considerable spectral information for CWP estimation. New bands were identified in the workflow outside the typical Landsat bands used to estimate CWP and its components (Y and ET C ). Landsat bands 1 and 3 were the most effective at estimating CWP and Y with an R 2 of 0.72 (RMSE = 0.50 kg m −3 ) and 0.64 (RMSE = 0.31 kg m −2 ), respectively. All of the bands were poor at estimating ET C , with Landsat bands 1 and 7 being the most highly correlated (R 2 = 0.13, RMSE = 0.08 m). Future work should train models with multiple estimates of CWP and Y over the growing season, while ET C may be better estimated with thermal infrared bands not considered in this study. Finally, studies should also consider estimating CWP categorically, instead of continuously, if the same objectives of testing and monitoring are met.

Book chapter↗

Using Landsat and MODIS satellite collections to examine extent, timing, and potential impacts of surface water inundation in California croplands☆

The state of California, United States of America produces many crop products that are both utilized domestically and exported throughout the world. With nearly 39,000 km 2 of croplands, monitoring unintentional and intentional surface water inundation is important for water resource management and flood hazard readiness. We examine inundation dynamics in California croplands from 2003 to 2020 by intersecting monthly surface water maps (n = 216 months) derived using two satellite remote sensing platforms (Landsat and Moderate Resolution Imaging Spectroradiometer [MODIS]) with a high-quality cropland map generated by the California Department of Water Resources. Surface water maps were produced using the Dynamic Surface Water Extent model, in which satellite image pixels are classified into different levels of detection confidence. Our analysis focused on calculating monthly and annual occurrence of “high confidence” water for each satellite collection across eight cropland types and 58 counties. Results indicate that 49.9% (MODIS) to 56.4% (Landsat) of croplands were inundated at least once during the 18-year timespan. Rice crops, due to their unique need of consistent surface water and dominance as a crop type in CA, had the highest proportion of and mean annual inundation area, while citrus crops had the lowest. Mean monthly inundation patterns in most croplands followed California's precipitation patterns with high inundation during the winter and spring rainy season. At the county level, croplands in the southern Central Valley typically had high occurrences of inundation in conjunction with large crop areas. Exposure and sensitivity of inundation for three crop types (citrus, deciduous, and vineyards) that are typically less associated with intentional inundation were geographically variable, but overall were generally highest in counties in the southern Central Valley, California's primary agricultural region. Flood and precipitation related crop insurance claims indicated that rice had the highest mean indemnity payout for any month with damages typically occurring in March and April. Insurance claims were also high in deciduous fruit and nut crops, which had peak damages in February. A comparison between inundation results and insurance claims suggests that the inundation mapped by our process coincides with claim activity. These data elucidate water inundation patterns across the state that can serve to inform farmers, insurers, decision makers, resource managers, and flood mitigation professionals.

California↗

Methods for estimating peak-flow frequencies at ungaged sites in Montana based on data through water year 2011: Chapter F in Montana StreamStats

The U.S. Geological Survey (USGS), in cooperation with the Montana Department of Natural Resources and Conservation, completed a study to update methods for estimating peak-flow frequencies at ungaged sites in Montana based on peak-flow data at streamflow-gaging stations through water year 2011. The methods allow estimation of peak-flow frequencies (that is, peak-flow magnitudes, in cubic feet per second, associated with annual exceedance probabilities of 66.7, 50, 42.9, 20, 10, 4, 2, 1, 0.5, and 0.2 percent) at ungaged sites. The annual exceedance probabilities correspond to 1.5-, 2-, 2.33-, 5-, 10-, 25-, 50-, 100-, 200-, and 500-year recurrence intervals, respectively. Regional regression analysis is a primary focus of Chapter F of this Scientific Investigations Report, and regression equations for estimating peak-flow frequencies at ungaged sites in eight hydrologic regions in Montana are presented. The regression equations are based on analysis of peak-flow frequencies and basin characteristics at 537 streamflow-gaging stations in or near Montana and were developed using generalized least squares regression or weighted least squares regression. All of the data used in calculating basin characteristics that were included as explanatory variables in the regression equations were developed for and are available through the USGS StreamStats application (http://water.usgs.gov/osw/streamstats/) for Montana. StreamStats is a Web-based geographic information system application that was created by the USGS to provide users with access to an assortment of analytical tools that are useful for water-resource planning and management. The primary purpose of the Montana StreamStats application is to provide estimates of basin characteristics and streamflow characteristics for user-selected ungaged sites on Montana streams. The regional regression equations presented in this report chapter can be conveniently solved using the Montana StreamStats application. Selected results from this study were compared with results of previous studies. For most hydrologic regions, the regression equations reported for this study had lower mean standard errors of prediction (in percent) than the previously reported regression equations for Montana. The equations presented for this study are considered to be an improvement on the previously reported equations primarily because this study (1) included 13 more years of peak-flow data; (2) included 35 more streamflow-gaging stations than previous studies; (3) used a detailed geographic information system (GIS)-based definition of the regulation status of streamflow-gaging stations, which allowed better determination of the unregulated peak-flow records that are appropriate for use in the regional regression analysis; (4) included advancements in GIS and remote-sensing technologies, which allowed more convenient calculation of basin characteristics and investigation of many more candidate basin characteristics; and (5) included advancements in computational and analytical methods, which allowed more thorough and consistent data analysis. This report chapter also presents other methods for estimating peak-flow frequencies at ungaged sites. Two methods for estimating peak-flow frequencies at ungaged sites located on the same streams as streamflow-gaging stations are described. Additionally, envelope curves relating maximum recorded annual peak flows to contributing drainage area for each of the eight hydrologic regions in Montana are presented and compared to a national envelope curve. In addition to providing general information on characteristics of large peak flows, the regional envelope curves can be used to assess the reasonableness of peak-flow frequency estimates determined using the regression equations.

Montana↗

USGS remote sensing coordination for the 2010 Haiti earthquake

In response to the devastating 12 January 2010, earthquake in Haiti, the US Geological Survey (USGS) provided essential coordinating services for remote sensing activities. Communication was rapidly established between the widely distributed response teams and data providers to define imaging requirements and sensor tasking opportunities. Data acquired from a variety of sources were received and archived by the USGS, and these products were subsequently distributed using the Hazards Data Distribution System (HDDS) and other mechanisms. Within six weeks after the earthquake, over 600,000 files representing 54 terabytes of data were provided to the response community. The USGS directly supported a wide variety of groups in their use of these data to characterize post-earthquake conditions and to make comparisons with pre-event imagery. The rapid and continuing response achieved was enabled by existing imaging and ground systems, and skilled personnel adept in all aspects of satellite data acquisition, processing, distribution and analysis. The information derived from image interpretation assisted senior planners and on-site teams to direct assistance where it was most needed.

Photogrammetric Engineering and Remote Sensing↗

Higher resolution satellite remote sensing and the impact on image mapping

Recent advances in spatial, spectral, and temporal resolution of civil land remote sensing satellite data are presenting new opportunities for image mapping applications. The U.S. Geological Survey's experimental satellite image mapping program is evolving toward larger scale image map products with increased information content as a result of improved image processing techniques and increased resolution. Thematic mapper data are being used to produce experimental image maps at 1:100,000 scale that meet established U.S. and European map accuracy standards. Availability of high quality, cloud-free, 30-meter ground resolution multispectral data from the Landsat thematic mapper sensor, along with 10-meter ground resolution panchromatic and 20-meter ground resolution multispectral data from the recently launched French SPOT satellite, present new cartographic and image processing challenges. The need to fully exploit these higher resolution data increases the complexity of processing the images into large-scale image maps. The removal of radiometric artifacts and noise prior to geometric correction can be accomplished by using a variety of image processing filters and transforms. Sensor modeling and image restoration techniques allow maximum retention of spatial and radiometric information. An optimum combination of spectral information and spatial resolution can be obtained by merging different sensor types. These processing techniques are discussed and examples are presented.

Acta Astronautica↗

The U.S. Geological Survey cartographic and geographic information science research activities 2006-2010

The U.S. Geological Survey (USGS) produces geospatial databases and topographic maps for the United States of America. A part of that mission includes conducting research in geographic information science (GIScience) and cartography to support mapping and improve the design, quality, delivery, and use of geospatial data and topographic maps. The Center of Excellence for Geospatial Information Science (CEGIS) was established by the USGS in January 2006 as a part of the National Geospatial Program Office. CEGIS (http://cegis.usgs.gov) evolved from a team of cartographic researchers at the Mid-Continent Mapping Center. The team became known as the Cartographic Research group and was supported by the Cooperative Topographic Mapping, Geographic Analysis and Monitoring, and Land Remote Sensing programs of the Geography Discipline of the USGS from 1999-2005. In 2006, the Cartographic Research group and its projects (http://carto-research.er.usgs.gov/) became the core of CEGIS staff and research. In 2006, CEGIS research became focused on The National Map (http://nationalmap.gov).

Cartography and Geographic Information Science↗

Democratizing macroecology: Integrating unoccupied aerial systems with the National Ecological Observatory Network

Macroecology research seeks to understand ecological phenomena with causes and consequences that accumulate, interact, and emerge across scales spanning several orders of magnitude. Broad-extent, fine-grain information (i.e., high spatial resolution data over large areas) is needed to adequately capture these cross-scale phenomena, but these data have historically been costly to acquire and process. Unoccupied aerial systems (UAS or drones carrying a sensor payload) and the National Ecological Observatory Network (NEON) make the broad-extent, fine-grain observational domain more accessible to researchers by lowering costs and reducing the need for highly specialized equipment. Integration of these tools can further democratize macroecological research, as their strengths and weaknesses are complementary. However, using these tools for macroecology can be challenging because mental models are lacking, thus requiring large up-front investments in time, energy, and creativity to become proficient. This challenge inspired a working group of UAS-using academic ecologists, NEON professionals, imaging scientists, remote sensing specialists, and aeronautical engineers at the 2019 NEON Science Summit in Boulder, Colorado, to synthesize current knowledge on how to use UAS with NEON in a mental model for an intended audience of ecologists new to these tools. Specifically, we provide (1) a collection of core principles for collecting high-quality UAS data for NEON integration and (2) a case study illustrating a sample workflow for processing UAS data into meaningful ecological information and integrating it with NEON data collected on the ground—with the Terrestrial Observation System—and remotely—from the Airborne Observation Platform. With this mental model, we advance the democratization of macroecology by making a key observational domain—the broad-extent, fine-grain domain—more accessible via NEON/UAS integration.

Ecosphere↗

Climate-related variation in plant peak biomass and growth phenology across Pacific Northwest tidal marshes

The interannual variability of tidal marsh plant phenology is largely unknown and may have important ecological consequences. Marsh plants are critical to the biogeomorphic feedback processes that build estuarine soils, maintain marsh elevation relative to sea level, and sequester carbon. We calculated Tasseled Cap Greenness, a metric of plant biomass, using remotely sensed data available in the Landsat archive to assess how recent climate variation has affected biomass production and plant phenology across three maritime tidal marshes in the Pacific Northwest of the United States. First, we used clipped vegetation plots at one of our sites to confirm that tasseled cap greenness provided a useful measure of aboveground biomass (r 2 = 0.72). We then used multiple measures of biomass each growing season over 20–25 years per study site and developed models to test how peak biomass and the date of peak biomass varied with 94 climate and sea-level metrics using generalized linear models and Akaike Information Criterion (AIC) model selection. Peak biomass was positively related to total annual precipitation, while the best predictor for date of peak biomass was average growing season temperature, with the peak 7.2 days earlier per degree C. Our study provides insight into how plants in maritime tidal marshes respond to interannual climate variation and demonstrates the utility of time-series remote sensing data to assess ecological responses to climate stressors.

Oregon, Washington↗

Climate change amplifies ongoing declines in sagebrush ecological integrity

Understanding how climate change will contribute to ongoing declines in sagebrush ecological integrity is critical for informing natural resource management, yet complicated by interactions with wildfire and biological invasions. Here, we assessed potential future changes in sagebrush ecological integrity under a range of scenarios using an individual plant-based simulation model, integrated with remotely sensed estimates of current sagebrush ecological integrity. The simulation model allowed us to estimate how climate change, wildfire, and invasive annuals interact to alter the potential abundance of key plant functional types that influence sagebrush ecological integrity: sagebrush, perennial grasses, and annual grasses. Our results suggest that climate driven reductions in sagebrush ecological integrity may occur over broader areas than increases in sagebrush ecological integrity. Declines in sagebrush ecological integrity were most likely in hot and dry regions while increases were more likely in cool and wet regions. Increases in wildfire probability, largely driven by increasing invasive annual grass abundance, resulted in projected declines in sagebrush abundance and sagebrush ecological integrity in some regions, particularly the Great Basin. The most common projected transitions in sagebrush habitat classification were declines from Core Sagebrush Area to Growth Opportunity Area and from Growth Opportunity Area to Other Rangeland Area. Responses varied considerably across projections from different global climate models, highlighting the importance of climate uncertainty. However, our projections tended to be robust in areas that currently have the highest sagebrush ecological integrity. Our results provide a long-term perspective on the vulnerability of sagebrush ecosystems to climate change and may inform geographic prioritization of conservation and restoration investments. These results suggest that ongoing threats, such as the continued invasion by annual grasses and increased wildfire frequency, are likely to be amplified by climate change, and imply that the current imbalance between capacity for conservation to address threats to sagebrush will grow as the climate warms.

Rangeland Ecology and Management↗

OpenET: Filling a critical data gap in water management for the western United States

The lack of consistent, accurate information on evapotranspiration (ET) and consumptive use of water by irrigated agriculture is one of the most important data gaps for water managers in the western United States (U.S.) and other arid agricultural regions globally. The ability to easily access information on ET is central to improving water budgets across the West, advancing the use of data-driven irrigation management strategies, and expanding incentive-driven conservation programs. Recent advances in remote sensing of ET have led to the development of multiple approaches for field-scale ET mapping that have been used for local and regional water resource management applications by U.S. state and federal agencies. The OpenET project is a community-driven effort that is building upon these advances to develop an operational system for generating and distributing ET data at a field scale using an ensemble of six well-established satellite-based approaches for mapping ET. Key objectives of OpenET include: Increasing access to remotely sensed ET data through a web-based data explorer and data services; supporting the use of ET data for a range of water resource management applications; and development of use cases and training resources for agricultural producers and water resource managers. Here we describe the OpenET framework, including the models used in the ensemble, the satellite, meteorological, and ancillary data inputs to the system, and the OpenET data visualization and access tools. We also summarize an extensive intercomparison and accuracy assessment conducted using ground measurements of ET from 139 flux tower sites instrumented with open path eddy covariance systems. Results calculated for 24 cropland sites from Phase I of the intercomparison and accuracy assessment demonstrate strong agreement between the satellite-driven ET models and the flux tower ET data. For the six models that have been evaluated to date (ALEXI/DisALEXI, eeMETRIC, geeSEBAL, PT-JPL, SIMS, and SSEBop) and the ensemble mean, the weighted average mean absolute error (MAE) values across all sites range from 13.6 to 21.6 mm/month at a monthly timestep, and 0.74 to 1.07 mm/day at a daily timestep. At seasonal time scales, for all but one of the models the weighted mean total ET is within ±8% of both the ensemble mean and the weighted mean total ET calculated from the flux tower data. Overall, the ensemble mean performs as well as any individual model across nearly all accuracy statistics for croplands, though some individual models may perform better for specific sites and regions. We conclude with three brief use cases to illustrate current applications and benefits of increased access to ET data, and discuss key lessons learned from the development of OpenET.

western United States↗

Working toward a National Coordinated Soil Moisture Monitoring Network: Vision, progress, and future directions

Soil moisture is a critical land surface variable, impacting the water, energy, and carbon cycles. While in situ soil moisture monitoring networks are still developing, there is no cohesive strategy or framework to coordinate, integrate, or disseminate these diverse data sources in a synergistic way that can improve our ability to understand climate variability at the national, state, and local levels. Thus, a national strategy is needed to guide network deployment, sustainable network operation, data integration and dissemination, and user-focused product development. The National Coordinated Soil Moisture Monitoring Network (NCSMMN) is a federally led, multi-institution effort that aims to address these needs by capitalizing on existing wide-ranging soil moisture monitoring activities, increasing the utility of observational data, and supporting their strategic application to the full range of decision-making needs. The goals of the NCSMMN are to 1) establish a national “network of networks” that effectively demonstrates data integration and operational coordination of diverse in situ networks; 2) build a community of practice around soil moisture measurement, interpretation, and application—a “network of people” that links data providers, researchers, and the public; and 3) support research and development (R&D) on techniques to merge in situ soil moisture data with remotely sensed and modeled hydrologic data to create user-friendly soil moisture maps and associated tools. The overarching mission of the NCSMMN is to provide coordinated high-quality, nationwide soil moisture information for the public good by supporting applications like drought and flood monitoring, water resource management, agricultural and forestry planning, and fire danger ratings.

Bulletin of the American Meteorological Society↗

ERTS-1, a new window on our planet

The launch, on July 23, 1972, of the first Earth Resources Technology Satellite (ERTS-1) by the National Aeronautics and Space Administration was a major step forward in extending man 's ability to inventory the Earth 's resources and to evaluate objectively his impact upon the environment. ERTS spacecraft represent the first step in merging space and remote-sensing technologies into a system for inventorying and managing the Earth 's resources. Examples presented in this book demonstrate ERTS ' vast potential for inventorying resources, monitoring environmental conditions, and measuring changes. Such information is essential for the full evaluation of the Federal lands and determining their future use, as well as for improved planning of overall land use throughout the United States and the world. Ten bureaus of the U.S. Department of Interior have roles in the ERTS project. Nearly all of these participating bureaus are represented in almost 100 papers included in this book. Chapter 3 is entitled ' Applications to Water Resources ' and contains 23 separate sections. (Woodard-USGS)

Professional Paper↗

Remote sensing analysis to quantify change in woodland canopy cover on the San Carlos Apache Reservation, Arizona (1935 vs. 2017)

Since the late 1800s, pinyon–juniper woodland across the western U.S. has increased in density and areal extent and encroached into former grassland areas. The San Carlos Apache Tribe wants to gain qualitative and quantitative information on the historical conditions of their tribal woodlands to use as a baseline for restoration efforts. At the San Carlos Apache Reservation, in east-central Arizona, large swaths of woodlands containing varying mixtures of juniper ( Juniperus spp.), pinyon ( Pinus spp.) and evergreen oak ( Quercus spp.) are culturally important to the Tribe and are a focus for restoration. To determine changes in canopy cover, we developed image analysis techniques to monitor tree and large shrub cover using 1935 and 2017 aerial imagery and compared results over the 82-year interval. Results showed a substantial increase in the canopy cover of the former savannas, and encroachment (mostly juniper) into the former grasslands of Big Prairie. The Tribe is currently engaged in converting juniper woodland back into an open savanna, more characteristic of assumed pre-reservation conditions for that area. Our analysis shows areas on Bee Flat that, under the Tribe’s active restoration efforts, have returned woodland canopy cover to levels roughly analogous to that measured in 1935.

Arizona↗

Forecasting, detecting, and tracking volcanic eruptions from space

Satellite monitoring of volcanic activity typically includes four primary observations: (1) deformation and surface change, (2) gas emissions, (3) thermal anomalies, and (4) ash plumes. These phenomena are imaged by remote sensing data that span the electromagnetic spectrum, from microwave to ultraviolet energy and including visible and infrared wavelengths. The primary uses of satellite data in volcanology are forecasting, detecting, and tracking eruptive activity. Eruptions are often preceded by a number of indicators that are detectable from space, including surface deformation, subtle increases in surface temperature, and elevated gas emissions. The first indications of eruption, especially at remote volcanoes, are often identified in satellite data by strong thermal anomalies and/or the presence of ash and gas in the atmosphere, the recognition of which can be automated for rapid eruption detection. Once an eruption is in progress, space-based imagery of all types can track activity over time, providing information on the emplacement of volcanic deposits, the presence and character of ash plumes, and potential changes in the character of the eruption, all of which aid hazards assessment. Activity at Agung volcano, Indonesia, during 2017–2019, offers an excellent example of the importance of remote sensing datasets for forecasting, detecting, and tracking eruptions. Challenges to exploiting current and future satellite data include ensuring regular acquisitions over active volcanoes and developing tools for automated analysis of the massive volume of imagery for volcano-related signals.

Remote Sensing in Earth Systems Sciences↗