SEARCH · USGS Science

Results for “Open Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26Linked to original sources

USGS2016

Statistical analysis of lake levels and field study of groundwater and surface-water exchanges in the northeast Twin Cities Metropolitan Area, Minnesota, 2002 through 2015: Chapter A of Water levels and groundwater and surface-water exchanges in lakes of the northeast Twin Cities Metropolitan Area, Minnesota, 2002 through 2015

Water levels declined from 2003 to 2011 in many lakes in Ramsey and Washington Counties in the northeast Twin Cities Metropolitan Area, Minnesota; however, water levels in other northeast Twin Cities Metropolitan Area lakes increased during the same period. Groundwater and surface-water exchanges can be important in determining lake levels where these exchanges are an important component of the water budget of a lake. An understanding of groundwater and surface-water exchanges in the northeast Twin Cities Metropolitan Area has been limited by the lack of hydrologic data. The U.S. Geological Survey, in cooperation with the Metropolitan Council and Minnesota Department of Health, completed a field and statistical study assessing lake-water levels and regional and local groundwater and surface-water exchanges near northeast Twin Cities Metropolitan Area lakes. This report documents the analysis of collected hydrologic, water-quality, and geophysical data; and existing hydrologic and geologic data to (1) assess the effect of physical setting and climate on lake-level fluctuations of selected lakes, (2) estimate potential percentages of surface-water contributions to well water across the northeast Twin Cities Metropolitan Area, (3) estimate general ages for waters extracted from the wells, and (4) assess groundwater inflow to lakes and lake-water outflow to aquifers downgradient from White Bear Lake. Statistical analyses of lake levels during short-term (2002–10) and long-term (1925–2014) periods were completed to help understand lake-level changes across the northeast Twin Cities Metropolitan Area. Comparison of 2002–10 lake levels to several landscape and geologic characteristics explained variability in lake-level changes for 96 northeast Twin Cities Metropolitan Area lakes. Application of several statistical methods determined that (1) closed-basin lakes (without an active outlet) had larger lake-level declines than flow-through lakes with an outlet; (2) closed-basin lake-level changes reflected groundwater-level changes in the Quaternary, Prairie du Chien, and Jordan aquifers; (3) the installation of outlet-control structures, such as culverts and weirs, resulted in smaller multiyear lake-level changes than lakes without outlet-control structures; (4) water levels in lakes primarily overlying Superior Lobe deposits were significantly more variable than lakes primarily overlying Des Moines Lobe deposits; (5) lake-level declines were larger with increasing mean lake-level elevation; and (6) the frequency of some of these characteristics varies by landscape position. Flow-through lakes and lakes with outlet-control structures were more common in watersheds with more than 50 percent urban development compared to watersheds with less than 50 percent urban development. A comparison of two 35-year periods during 1925–2014 revealed that variability of annual mean lake levels in flow-through lakes increased when annual precipitation totals were more variable, whereas variability of annual mean lake levels in closed-basin lakes had the opposite pattern, being more variable when annual precipitation totals were less variable. Oxygen-18/oxygen-16 and hydrogen-2/hydrogen-1 ratios for water samples from 40 wells indicated the well water was a mixture of surface water and groundwater in 31 wells, whereas ratios from water sampled from 9 other wells indicated that water from these wells receive no surface-water contribution. Of the 31 wells with a mixture of surface water and groundwater, 11 were downgradient from White Bear Lake, likely receiving water from deeper parts of the lake. Age dating of water samples from wells indicated that the age of water in the Prairie du Chien and Jordan aquifers can vary widely across the northeast Twin Cities Metropolitan Area. Estimated ages of recharge for 9 of the 40 wells sampled for chlorofluorocarbon concentrations ranged widely from the early 1940s to mid-1970s. The wide range in estimated ages of recharge may have resulted from the wide range in the open-interval lengths and depths for the wells. Results from stable isotope analyses of water samples, lake-sediment coring, continuous seismic-reflection profiling, and water-level and flow monitoring indicated that there is groundwater inflow from nearshore sites and lake-water outflow from deep-water sites in White Bear Lake. Continuous seismic-reflection profiling indicated that deep sections of White Bear, Pleasant, Turtle, and Big Marine Lakes have few trapped gases and little organic material, which indicates where groundwater and lake-water exchanges are more likely. Water-level differences between White Bear Lake and piezometer and seepage measurements in deep waters of the lake indicate that groundwater and lake-water exchange is happening in deep waters, predominantly downgradient from the lake and into the lake sediment. Seepage fluxes measured in the nearshore sites of White Bear Lake generally were higher than seepage fluxes measured in the deep-water sites, which indicates that groundwater-inflow rates at most of the nearshore sites are higher than lake-water outflow from the deep-water sites.

Minnesota↗

USGS2002

An update of Quaternary faults of central and eastern Oregon

This is the online version of a CD-ROM publication. We have updated the eastern portion of our previous active fault map of Oregon (Pezzopane, Nakata, and Weldon, 1992) as a contribution to the larger USGS effort to produce digital maps of active faults in the Pacific Northwest region. The 1992 fault map has seen wide distribution and has been reproduced in essentially all subsequent compilations of active faults of Oregon. The new map provides a substantial update of known active or suspected active faults east of the Cascades. Improvements in the new map include (1) many newly recognized active faults, (2) a linked ArcInfo map and reference database, (3) more precise locations for previously recognized faults on shaded relief quadrangles generated from USGS 30-m digital elevations models (DEM), (4) more uniform coverage resulting in more consistent grouping of the ages of active faults, and (5) a new category of 'possibly' active faults that share characteristics with known active faults, but have not been studied adequately to assess their activity. The distribution of active faults has not changed substantially from the original Pezzopane, Nakata and Weldon map. Most faults occur in the south-central Basin and Range tectonic province that is located in the backarc portion of the Cascadia subduction margin. These faults occur in zones consisting of numerous short faults with similar rates, ages, and styles of movement. Many active faults strongly correlate with the most active volcanic centers of Oregon, including Newberry Craters and Crater Lake.

Open-File Report↗

USGS1977

Geology of the Monterey Bay region

Geophysical data and sea floor samples collected from the continental shelf and slope between Ano Nuevo Point and Point Sur, California indicate that the Monterey Bay region has had a complex late Cenozoic tectonic history. Uplift and depression have produced a succession of regressive and transgressive sedimentary units, while contemporaneous right-slip along faults of the San Andreas system have offset major structural and lithologic elements. This deformation produced three regional and several local unconformities within upper Tertiary rocks and initiated development of a canyon system that today includes the Monterey, Ascension, Carmel, and other large submarine canyons. The Tertiary stratigraphy of the offshore Monterey Bay area is divided into two provinces by a major structural boundary, the north-trending Palo Colorado-San Gregorio fault zone. East of this zone in the offshore are four seismically distinct sequences that can be correlated with major sequences onshore. These sequences comprise (1) pre-Tertiary basement, and (2) middle Miocene, (3) upper Miocene to Pliocene, and (4) upper Pliocene to Holocene sedimentary intervals. Each of the latter three sequences is bounded by unconformities, as is its counterpart on land. Only Neogene sedimentary rocks are present offshore; Paleogene units, if originally present, have been removed completely by pre-middle Miocene erosion. An extensive erosional surface was cut during Zemorrian time into the late Mesozoic granitic basement rocks. Incised into this surface are the ancestral Monterey Canyon and an unnamed canyon. Marine sedimentary rocks of upper Miocene and Pliocene age overlie this unconformably and fill the unnamed canyon. Similar rocks also may have once filled Monterey Canyon. Near shore these strata are covered by terrestrial alluvial and eolian deposits, deltaic deposits, marine canyon fill, landslide and slump deposits, and unconsolidated sediments that range in age from upper Pliocene to Holocene. Monterey Canyon appears to have been filled and exhumed at least twice since its inception in Oligocene time, once in late Miocene and once in Pleistocene time. Three major seismic stratigraphic units are apparent in continuous seismic reflection profiles from the offshore area west of the Palo Colorado-San Gregorio fault zone. These are (1) acoustical basement, and (2) middle Tertiary and (3) late Tertiary to Quaternary sedimentary intervals. Acoustical basement comprises Cretaceous to early Tertiary sedimentary rocks, Mesozoic or older metamorphic rocks, and Cretaceous or Jurassic rocks of the Franciscan assemblage. The middle Tertiary sequence consists of sedimentary rocks of questionable Miocene age. The late Tertiary to Quaternary sequence is composed of Pliocene sedimentary rocks and unconsolidated marine sediments, and submarine landslide and slump deposits. Seismic reflection surveys indicate two major, intersecting, northwest-trending fault zones to be present in the offshore Monterey Bay area. The Palo Colorado-San Gregorio fault zone may be more than 200 km long; it is narrow (approximately 3 km wide) and is represented in most places by one or two faults. This zone appears to connect with faults mapped on land near Ano Nuevo Point and Point Sur. The Monterey Bay fault zone, located in the area between Santa Cruz and Monterey, is a diffuse zone, approximately 10 to 15 km wide, of en echelon faults. Faults within this zone appear to connect with faults on land near Monterey, and the zone appears to be truncated by the Palo Colorado-San Gregorio fault zone west of Santa Cruz. Locations of more than 110 earthquakes (1968-1976) show that the newly mapped fault zones in Monterey Bay are seismically active. Epicenters in the bay form two clusters, one at the intersection of the Monterey Bay and Palo Colorado-San Gregorio fault zones, and the other in a linear belt that trends northwest along the Palo Colorado-San Gregorio fault zone. Faults within th

California↗

USGS1998

Preliminary lithostratigraphy, interpreted geophysical logs and hydrogeologic characteristics of the 98th Street core hole, Albuquerque, New Mexico

Core samples, cuttings, and numerous geophysical logs obtained from the 1560 ft (475.5 m) core hole drilled at 98th Street on the west side of Albuquerque provide key stratigraphic and hydraulicproperty information for the upper clastic sediments of the Santa Fe Group, which form the principal aquifer in the region. The core hole and an adjacent water-level monitoring well were drilled cooperatively by the U.S. Geological Survey (USGS) and the City of Albuquerque and investigated in collaboration with the New Mexico Bureau of Mines and Mineral Resources and the New Mexico Office of the State Engineer to improve understanding of aquifer characteristics and controls on ground-water availability and quality. The 751.5 ft (229 m) of core samples recovered from the core hole are the only undisturbed samples of nonlithified sediments of the upper part of the Santa Fe Group that have been collected in this area. These samples have allowed us, for the first time, to directly observe and characterize the lithic and sedimentologic features of this part of the section, and to correlate the detailed geologic features with geophysical-log characteristics, magnetic susceptibility measurements, hydraulic variables, and trace-element geochemistry. The adjacent well was designed to be an areally representative ground-water level and water-quality monitoring well for the Santa Fe Group aquifer. This report chiefly addresses the lithologic, stratigraphic, and hydrogeologic features determined from the 98th Street core hole; other reports address related characteristics. Previous geologic studies predicted the stratigraphy at the site to be, from the land surface downward: 1) Quaternary alluvial and eolian valley-border sediments; 2) fluvial sand and gravel of the upper unit of the Santa Fe Group (Ceja Member of the Santa Fe Formation of Kelly, 1978; equivalent to the Sierra Ledrones Formation of Machette (1978a); 3) downward-fining basin-floor silty clay deposits and 4) fluvial sandy and silty facies of the middle unit of the Santa Fe Group (the Middle Red Member of Bryan and McCann, 1937, and Lambert, 1968). New geologic interpretations indicate that the drill site is in a fault block bounded by east-dipping normal faults and the oblique Atrisco-Rincon fault zone. Core-hole sampling recovered 760.6 ft (231.8 m) of core, in core segments 2.1-2.375 in. (5.3-6 cm) in diameter, and 0.2-10 ft (6.1 cm-3 m) long. The core hole was cased with centered 3-in. PVC casing, and is available for geophysical logging. The monitoring-well hole contains four piezometers at depths of 1544 ft (470.6 m), 1112 ft (338.9 m), 749 ft (228.3 m), and 458 ft (139.6 m). Sediments in the core are loose to weakly cemented gravel, sand, silt, and clay, and lithified sandstone. Laboratory analyses of particle-size distributions of 28 channel samples show that most silty sand samples are uniformly graded and poorly sorted; medium sand samples are moderately sorted. Six principal sediment types are used to describe the core; these sediment types are repeated in various combinations throughout the core and are used to define 22 lithologic units in the cored interval. The six principal sediment types contain sequences of beds having similar modal grain size and sedimentary structure, and are listed in decreasing abundance: 1) Silty fine sand, poorly sorted, containing a coarse silt matrix. Geophysical logs show highly variable baselines with deflections that are related to clay beds and sequences of silt, clay, and sorted fine sand. Density values of 2.12-2.25 g/cc and porosity values of 30-35 percent are typical. 2) Medium sand, moderately to poorly sorted. Geophysical logs show baselines of low variability with deflections that are related to clay beds and sequences of silt, clay, and sorted fine sand. Density values of 2.05-2.20 g/cc and porosity values of 30-35 percent are typical. 3) Clayey sandy silt, poorly sorted, locally microlaminated clay and silt, generally nonplastic. Geophysical logs show highly variable baselines with deflections that are related to sequences of clay and fine sand. Density values of 2.1-2.2 g/cc and porosity values of 30-40 percent are typical. 4) Silt and clay, characteristically red to reddish brown and medium to high plasticity, massive to indistinctly microlaminated. Geophysical logs show variable baselines with broad, high-amplitude compound spikes that are related to sequences of silt and fine sand. Density values of 2.12-2.25 g/cc and porosity values of >45 percent are typical. 5) Sand and gravel, poorly sorted. Geophysical logs show variable baselines with deflections that are related to sequences of silty and sorted fine sand. 6) Sandstone, fine-to-medium grained, poorly sorted, cemented chiefly by calcite, which fills the original pore space. Geophysical logs show density values >2.25 g/cc and porosity values <30 percent. The 22 lithologic units are correlated with recognized basin-floor fluvial lithofacies (Hawley, 1996), which include sand and gravel (lithofacies I), sand with lenses of pebbly sand, silt, and silty clay (lithofacies II), and interbedded sand, silt, and silty clay (modified lithofacies III, IV, IX). The sediments in the core hole are correlated with three informal lithostratigraphic units. The top unit, 0-19 ft (0-5.8 m) depth, consists of Quaternary eolian sand and valley-border alluvium. Coarsegrained deposits in the 19-97 ft (5.8-29.6 m) interval are correlated with the upper unit of the Santa Fe Group. The fine-grained section in the 97-787 ft (29.6-239.9 m) interval is correlated tentatively with the middle unit of the Santa Fe Group. This section contains thick sequences of laminated red and olivebrown clay and silt overbank deposits (441-787 ft) in the distinctive Atrisco member of Connell and others (1998). The Atrisco is correlated with fine-grained zones in numerous wells throughout the central Albuquerque metropolitan area, and is recognized as a zone that separates the upper Santa Fe aquifer from underlying middle Santa Fe deposits. The lower section of the middle unit of the Santa Fe, 787-1500 ft (239.9-457.2 m) depth, includes an upper sequence of moderately sorted channel-fill medium sand, and a lower sequence of sand, silt, and clay overbank deposits. The age of the cored interval is not known precisely. The upper Santa Fe gravel is related regionally to a through-flowing river system that was established in the Rio Grande rift valleys in Early Pliocene time, >4.5 MA. The middle Santa Fe unit is dated tentatively by correlation with a fossiliferous section, in which sandy beds that directly underlie the upper Santa Fe are Late Miocene (Hemphellian), 4.6- 8.9 MA. Further, the middle Santa Fe unit, with dominantly normal magnetic polarity, may have been deposited during closely spaced normal magnetic chrons 5.9-8.3 Ma. Four hydrostratigraphic units summarize the hydrogeologic framework for the 98th Street site: 1) Quaternary valley-border deposits, 2) upper Santa Fe sand and gravel deposits, 3) middle Santa Fe overbank deposits, and 4) middle Santa Fe channel-sand deposits. Empirical values of horizontal hydraulic conductivity estimated from core samples reveal a previously unknown contrast in hydraulic conductivity in the lowest two hydrostratigraphic units. Correlations among numerous wells show that the distinctively fine-grained Atrisco member, with estimated hydraulic conductivities (K) of <0.02-17 ft/day, is a laterally extensive barrier to vertical ground-water flow. The underlying unit that contains moderately sorted medium sand is a potential aquifer production zone that should be investigated further. Laboratory determination of vertical hydraulic conductivity values for fine-grained core samples range from 10 -2 to 10 -7 ft/day; recompacted sandy samples have K values of 1 to 10 -2 ft/day. Results of tests conducted with increasing effective stress show that K values of all samples decrease with decreasing porosity. Comparison of K values from laboratory, empirical, and calculated geophysical values shows discrepancies of 1-3 orders of magnitude (ft/day), indicating that additional analyses of core samples and geophysical data are necessary for future characterization of the Santa Fe Group aquifer.

New Mexico↗

USGS1979

A plan to study the aquifer system of the Central Valley of California

Unconsolidated Quaternary alluvial deposits comprise a large complex aquifer system in the Central Valley of California. Millions of acre-feet of water is pumped from the system annually to support a large and expanding agribusiness industry. Since the 1950's, water levels have been steadily declining in many areas of the valley and concern has been expressed about the ability of the entire ground-water system to support agribusiness at current levels, not to mention its ability to function at projected expansion levels. At current levels of ground-water use, an estimated 1.5 to 2 million acre-feet is withdrawn from storage each year; that is, 1.5 to 2 million acre-feet of water is pumped annually in excess of annual replenishment. The U.S. Geological Survey has initiated a 4-year study to develop geologic, hydrologic, and hydraulic information and to establish a valleywide ground-water data base that will be used to build computer models of the ground-water flow system. Subsequently, these models may be used to evaluate the system response to various ground-water management alternatives. This report describes current problems, objectives of the study, and outlines the general work to be accomplished in the study area. A bibliography of about 600 references is included. (Kosco-USGS)

California↗

USGS2021

Shoreface and Holocene sediment thickness offshore of Rockaway Peninsula, New York

During September and October 2019, the U.S. Geological Survey mapped the shoreface and inner continental shelf offshore of the Rockaway Peninsula in New York using high-resolution chirp seismic reflection and single-beam bathymetry geophysical techniques. The results from this study are important for assessing the Quaternary evolution of the Rockaway Peninsula and determining coastal sediment availability, which is crucial for establishing sediment budgets, understanding sediment dispersal, and managing coastlines. This report presents preliminary interpretations of seismic profiles and maps of shoreface and Holocene sediment thickness from the shoreline to about 2 kilometers offshore. The results indicate that shoreface and Holocene sediment thickness demonstrates zonal variability because of underlying geology and sediment availability. Based on geomorphic features and underlying stratigraphy, the study area is separated into west, west-central, east-central, and east zones. Holocene sediment, which includes the shoreface and seafloor features with positive morphology (for example, nearshore bars, ebb-tide deltas, and sorted bedforms), thickens to the west and may be related to accommodation and westward dip of the regional unconformity. Shoreface units, which are thought to represent the active volume of littoral sediment, are thickest in the west-central peninsula where the geologic base of the shoreface is deeper. Shoreface units with moderate thickness are in the western and eastern peninsula where there are positive morphological features (for example, deposits accumulating updrift from the jetty, ebb-tide deltas, and so on). The thinnest shorefaces are in the east-central Rockaway Peninsula because of less accommodation caused by the shoaling regional unconformity.

New York↗

USGS1978

Geology of the Arco-Big Southern Butte area, eastern Snake River Plain, and potential volcanic hazards to the radioactive waste management complex, and other waste storage and reactor facilities at the Idaho National Engineering Laboratory, Idaho

The Arco-Big Southern Butte area of the eastern Snake River Plain, Idaho, includes a volcanic rift zone and more than 70 Holocene and late Quaternary basalt volcanoes. The Arco volcanic rift zone extends southeast for 50 km from Arco to about 10 km southeast of Big Southern Butte. The rift zone is the locus of extensional faults, graben, fissure basaltic volcanic vents, several rhyolite domes at Big Southern Butte, and a ferrolatite volcano at Cedar Butte. Limited radiometric age data and geological field criteria suggest that all volcanism in the area is younger than 700,000 years; at least 67 separate basaltic eruptions are estimated to have occurred within the last 200,000 years. The average volcanic recurrence interval for the Arco-Big Southern Butte area is approximately one eruption per 3,000 years. Radioactive waste storage and reactor facilities at the Idaho National Engineering Laboratory may be subject to potential volcanic hazards. The geologic history and inferred past volcanic events in the Arco-Big Southern Butte area provide a basis for assessing the volcanic hazard. It is recommended that a radiometric age-dating study be performed on rocks in cored drill holes to provide a more precise estimate of the eruption recurrence interval for the region surrounding and including the Radioactive Waste Management Complex. It is also recommended that several geophysical monitoring systems (dry tilt and seismic) be installed to provide adequate warning of future volcanic eruptions.

Idaho↗

USGS1984

Reconnaissance geology of the Al'Awshaziyah Quadrangle, sheet 26/41 B, Kingdom of Saudi Arabia

The Al 'Awshaziyah quadrangle (26/41 B) is located between lat 26°30' and 27°00 f N. and long 41°30' and 42°00' E. in the northeastern part of the Arabian Shield. The quadrangle contains surficial Quaternary deposits and locally exposed underlying upper Proterozoic intrusive, volcanic, and volcaniclastic rocks. The oldest rocks, gabbro and pyroxenite, are tentatively correlated with the Ha'il mafic-ultramafic complex to the north of the quadrangle. Two younger volcanic sequences, structurally more or less distinct but compositionally transitional, have been identified. The Aqab formation (about 640-610 Ma old) consists of slightly metamorphosed, moderately to strongly folded flows and tuffs of basalt, dacite, and minor rhyolite. An interlayered subaerial conglomerate and a lack of deep-marine sediments distinguish the Aqab from the older and distinctly oceanic Nuf formation. The.Aqab formation is overlain by felsic ash-flow tuffs and related fragmental rocks of the Al 'Awshaziyah formation whose major source is a large caldera in the western part of the quadrangle. Plutonic rocks include granites that predate and postdate both the Aqab and Al 'Awshaziyah formations. The youngest granites, dated at about 580 Ma, are the Salma and Ar Rumman batholiths and are more -alkaline and more silicic than the older granites. The Ar Rumman granite is peralkaline. Even the youngest intrusive rocks have been cut by faults that are probably related to the northwest-trending Najd fault system. No metallic mineralization has been recognized in the quadrangle. A small quarry near the western boundary of the quadrangle produces crushed rock.

Open-File Report↗

USGS1982

Water resources of Rockland Basin, southeastern Idaho

Rockland basin comprises about 320 sq mi of the Snake River drainage in southeastern Idaho. Mountain ranges bordering the basin are composed predominantly of limestone and are complexly faulted. Major aquifers include Holocene alluvium, Quaternary-Tertiary volcanic rocks, and Tertiary sedimentary rocks. Groundwater occurs under water table conditions except where it is locally confined. Groundwater discharges to springs in the Deep Creek Mountains and maintains perennial streamflow. Near the mouth of Rock Creek, groundwater movement is northward toward the Snake River. Underflow is estimated to be 51,000 acre-ft/yr. Total water yield available to Rockland basin is estimated to be 5.0 in. (85,000 acre-ft) of the estimated 17.3 in. of annual precipitation. Evapotranspiration ranges from 9.9 to 17 in./yr, depending, in part, on altitude of the land surface. An estimated 12,000 acre-ft of surface water and 3,500 acre-ft of groundwater are used annually for irrigation. Less than 100 acre-ft of water is used for public supply, domestic, and stock supplies. East Fork Rock Creek supplies the most surface water for irrigation of agricultural lands. At the present (1980) state of groundwater development in Rockland basin, streams and aquifers are hydraulically connected. Pumping of groundwater in increased quantities from wells near streams will affect groundwater movement and may diminish streamflow. There are no long-term regional water table declines at present. Continued water level monitoring of selected wells may aid in documenting effects of future management practices on the groundwater system.

idaho↗

USGS2006

High-resolution boomer seismic-reflection profiles of the shelf off southern California from cruise A-1-00-SC: Santa Monica Bay to San Diego

High-resolution boomer data were collected in the California Continental Borderland as part of the southern California Earthquake Hazards Task of the Southern California Coastal and Marine Geology Regional Investigations Project. During the period from 1997 to 2002, five data-acquisition cruises collected seismic-reflection data using several different systems from offshore Santa Barbara, California, south to the Exclusive Economic Zone boundary with Mexico. A key mission of this project was to map late Quaternary deformation in addition to improving our understanding of which offshore fault zones might have potential to damage highly populated areas of southern California. State regulations concerning the use of seismic-reflection equipment within three miles of the coastline precluded the routine gathering of high-resolution multichannel data in that swath adjacent to the coast. Boomer seismic-reflection data, however, can be obtained within the state 3-mile limit provided the operation receives authorization from the California State Lands Commission. The Geopulse boomer data accessible through this report were collected on the cruise A-1-00-SC, which was the only survey where we requested permission to work inside the 3-mile limit of the State of California. These data are critical to discovering connections between onshore and offshore faults, the overall lengths of which are related to the potential size of an earthquake that might be generated along them. The 2000 survey was designed to fill the gap between onshore data and reflection data obtained in deeper water on previous cruises as well as data anticipated from future surveys. This report includes trackline maps showing the location of the data, as well as both digital data files (SEG-Y) and images of all of the profiles.

California↗

USGS1980

Exploratory trench across the Pleasant Valley Fault, Nevada

An exploratory trench was excavated across the 1915 trace of the Pleasant Valley fault 60 km south of Winnemucca, Nevada, to get information on the history of recent displacements on a fault that had produced a major earthquake in historic time, and on the appearance of such a fault in a trench cut in gravels, sands and silts of an alluvial fan. The trench exposed 16 mappable sedimentary units and four soils, including three buried paleosols. The ages of the mapped units could not be narrowly defined but they are of late Quaternary age. Some rodent bones suggest a possible age of about 5,000 years for one of the higher stratigraphic units. The fault zone is very clearly represented in the trench, and, to the full 4-m depth of the trench, consists of a zone of fault rubble as much as 1.5 m wide. Two fractures outside the fault rubble show no vertical displacement. In addition to the fault rubble, the fault is conspicuous because several of the mapped units terminate abruptly against the rubble zone, and because the sediments southeast of the zone are coarser-grained than the sediments northwest of the zone. Maximum vertical component of the 1915 displacement was estimated to be 0.4–0.6 m based on topography and 0.5–0.6 m based on displacement of stratigraphic units including soils. Two or more episodes of vertical displacement, one of about 0.3 m and another totaling at least 1.15 m prior to 1915 are recorded and may have occurred in the last 5,000 years. These and other displacement events prior to 1915 are poorly dated, but that several did occur in late Pleistocene and Holocene time is certain. Lack of wedge-shaped deposits or concentrations of large clasts adjacent to the fault suggest that all displacements were produced in small increments of probably less than one meter each.

Nevada↗

USGS1979

Two oil types on the North Slope of Alaska: implications for future exploration

Forty oil samples from across the North Slope of Alaska have been analyzed by the U.S. Bureau of Mines and the U.S. Geological Survey. Results of these analyses suggest two separate genetic oil types. The first type, the Simpson-Umiat oil type, occurs in reservoir rocks of Cretaceous and Quaternary age and includes oils from seeps in the Skull Cliff, Cape Simpson, Manning Point, and Ungoon Point areas; the Wolf Creek test well 3, and the Umiat oil field. These are higher gravity, low-sulfur oils with no, or slight, odd-numbered n-alkane predominance and pristane to phytane ratios greater than 1.5. The second type, the Barrow-Prudhoe oil type, occurs in reservoir rocks of Carboniferous to Cretaceous age and includes oils from South Barrow gas field, Prudhoe Bay oil field, and the Fish Creek test well 1. Physical properties of Barrow-Prudhoe oils are variable, but in general the oils are medium-gravity, high-sulfur oils with a slight even-numbered n-alkane predominance and pristane to phytane ratios of less than 1.5. The two types are believed to originate from different source rocks; the Barrow-Prudhoe type may have originated from a carbonate or other iron-deficient source rock, and the Simpson-Umiat type from a siliciclastic source rock. Occurrences of the two oil types, when outlined on a map, indicate at least two exploration fairways. The fairway for the Barrow-Prudhoe type is along the Barrow arch, and the fairway for the Simpson-Umiat type is the area of the best reservoir development for the Nanushuk Group.

Alaska↗

USGS2001

Lithology of gravel deposits of the Front Range urban corridor, Colorado: data and multivariate statistical analysis

Pebble count data from Quaternary gravel deposits north of Denver, Colo., were analyzed by multivariate statistical methods to identify lithologic factors that might affect aggregate quality. The pebble count data used in this analysis were taken from the map by Colton and Fitch (1974) and are supplemented by data reported by the Front Range Infrastructure Resources Project. This report provides data tables and results of the statistical analysis. The multivariate statistical analysis used here consists of log-contrast principal components analysis (method of Reyment and Savazzi, 1999) followed by rotation of principal components and factor interpretation. Three lithologic factors that might affect aggregate quality were identified: 1) granite and gneiss versus pegmatite, 2) quartz + quartzite versus total volcanic rocks, and 3) total sedimentary rocks (mainly sandstone) versus granite. Factor 1 (grain size of igneous and metamorphic rocks) may represent destruction during weathering and transport or varying proportions of rocks in source areas. Factor 2 (resistant source rocks) represents the dispersion shadow of metaquartzite detritus, perhaps enhanced by resistance of quartz and quartzite during weathering and transport. Factor 3 (proximity to sandstone source) represents dilution of gravel by soft sedimentary rocks (mainly sandstone), which are exposed mainly in hogbacks near the mountain front. Factor 1 probably does not affect aggregate quality. Factor 2 would be expected to enhance aggregate quality as measured by the Los Angeles degradation test. Factor 3 may diminish aggregate quality.

Open-File Report↗

USGS1994

Hydrologic data for the alluvium and terrace deposits of the Cimarron River from Freedom to Guthrie, Oklahoma

Ground water in the Quaternary alluvium and terrace deposits associated with the Cimarron River in northwestern Oklahoma is used extensively for irrigation, municipal, stock, and domestic supplies. The data in this report were collected as part of an investigation to provide State water managers with the quantitative knowledge necessary to manage the ground-water resource effectively. The investigation was conducted by the U.S. Geological Survey in cooperation with the Oklahoma Geological Survey. The information presented in this report include data collected in the field from 1985 through 1989, and unpublished data compiled from files of the U.S. Geological Survey and the Oklahoma Water Resources Board. Data include well and test-bole records, consisting of ground-water levels, depth of wells, principal aquifer, and primary use of water. Water levels include continuous, daily, monthly, and periodic measure- ments for selected wells. Concentrations of common chemical constituents, selected trace elements, organic analyses, and tritium analyses of water samples from wells completed in the Cimarron River alluvium and terrace deposits and Permian geologic units are reported. Winter and summer base-flow discharge measurements of the Cimarron River and its Tributaries are presented together with water-quality data from the measuring sites. Continuous water-level and precipitation-gage data are presented graphically. Locations of data- collection sites are shown on plates.

Open-File Report↗

USGS2006

Surficial geologic map and geodatabase of the Cuddeback Lake 30' x 60' quadrangle, San Bernardino and Kern Counties, California

A USGS surficial geologic mapping project, focused on the arid Southwest USA, conducted mapping and process studies to investigate landscape development and tectonic evolution. This project included the Cuddeback Lake 1:100,000-scale quadrangle located in the western Mojave Desert north-northeast of Los Angeles, between the southern Sierra Nevada and San Bernardino Mountains, in Kern and San Bernardino Counties, California. Geomorphic features include high-relief mountains, small hills, volcanic domes, pediments, broad alluvial valleys, and dry lakes. The mapped area includes pre-Tertiary plutonic, metavolcanic, metasedimentary, and other metamorphic rocks; Tertiary sedimentary and volcanic rocks; and Quaternary sediments and basalts. Included in the area are the El Paso, Lockhart, Blackwater, and Muroc faults as well as the central segment of the Garlock fault zone. The tectonically active western Mojave Desert and the variety of surficial materials have resulted in distinctive geomorphic features and terrains. Mapping has shown that the tectonically active area near the Garlock fault zone and El Paso Fault influenced development of drainage networks; base level is controlled by fault offset. There is evidence of a late Tertiary drainage network preserved in remnants of alluvial fans and paleo-drainage deposits north of the El Paso Mountains, west of the Lava Mountains, and south and west of the Rand Mountains. Faults identified as being active in the Holocene based on displaced stream channels, scarps, and shutter ridges include the Cantil Valley, Lockhart, Garlock, and Rand Mountain faults. Previously unmapped Holocene and late Pleistocene fault strands identified near the Rand Mountains may represent a splay at the northwest termination of the Lockhart Fault. The informally named Grass Valley fault, NW of Black Mountain, is a right-lateral strike-slip fault that may be a splay of the Blackwater Fault. Holocene activity on the Grass Valley fault is indicated by one displaced early Holocene stream terrace. Mapped faults in Fremont Valley are tentatively identified as surficial expressions of the buried Cantil Valley fault.

California↗

USGS1966

Geology of the Cerro Summit quadrangle, Montrose County, Colorado

The Cerro Summit quadrangle covers 58 square miles of dissected plateau on the south flank of the Gunnison uplift in southwestern Colorado. It lies east of the Uncompahgre River valley and south of the Black Canyon of the Gunnison River. Rocks dip gently in most of the quadrangle, but they are locally upturned and faulted on the margin of the Gunnison uplift and are intensely deformed in the core of the uplift. The rocks exposed are of Precambrian, late Mesozoic, and Cenozoic age. Precambrian rocks include metasedimentary schist and gneiss, granitic pegmatite, and olivine gabbro. The oldest Mesozoic rocks exposed are continental, fresh-water, and lagoonal deposits in the Late Jurassic Entrada Sandstone, Wanakah Formation, and Morrison Formation. Channel-fill deposits that unconformably overlie the Jurassic rocks are possibly the Burro Canyon Formation of Early Cretaceous age. Upper Cretaceous rocks include marine and nearshore deposits of the Dakota Sandstone, Mancos Shale, and Pictured Cliffs Sandstone, and the fresh- and brackish-water sandstone, shale, and coal of the Fruitland Formation. Rocks of Late Cretaceous age that crop out in the adjacent Cimarron Ridge area may also have been deposited in this quadrangle but are now eroded; these rocks include the nonmarine Kirtland Shale and an unnamed volcanic conglomerate and tuff breccia. Nine faunal zones in the Mancos Shale help to establish the correct correlation of units in the Upper Cretaceous. The Pictured Cliffs Sandstone, Fruitland Formation, and Kirtland Shale of the Cerro Summit area have been mapped by some geologists as the Mesaverde Formation. Fossils indicate that the rocks are younger than the type Mesaverde. The unnamed volcanic rocks represent major volcanism in nearby areas. A Late Cretaceous (Maestrichtian) age for the volcanism is indicated by palynological evidence and an isotopic age of approximately 66 million years. Middle Tertiary rocks are conglomerate and tuff breccia. Upper Tertiary or lower Quaternary rocks include gravel along Pool Gulch and older landslide debris on Waterdog Peak. Pleistocene and Recent deposits consist of the older stream gravel of Shinn Park, valley-fill deposits of Bostwick-Shinn Park, and pediment, landslide, eolian, alluvial, and colluvial deposits. P1elstocene valley-fill deposits of Bostwick-Shinn Park were deposited during the Cedar Ridge, or Kansan, to Pinedale or late Wisconsin times. The valley-fill deposits are divided into five units that are separated by strong Interglacial or Interstadial soils and that contain three volcanic ash beds. Chemical and petrographic data suggest that the middle ash bed may correlate with the Pearlette Ash Member (late Kansan) of the Sappa Formation in Nebraska. Alluvium on two pediment surfaces seems to be of Sacagawea Ridge or Illinoian age. Landslide deposits, of Pleistocene and Recent age, cover about 85 percent of the quadrangle; most of the deposits were formerly mapped as till. The name Cerro Till was abandoned because till does not occur in the type area. The dominant tectonic structures are the high-angle Cimarron fault of a few thousand feet displacement and the broad Montrose syncline. Evidence in the Cimarron Ridge area suggests that these structures formed in Late Cretaceous (Maestrichtian) time. Much of the strata near the surface of the quadrangle has been involved in landsliding that has continued from late Tertiary to the present.

Open-File Report↗

USGS2016

Geologic map and cross sections of the Embudo Fault Zone in the Southern Taos Valley, Taos County, New Mexico

The southern Taos Valley encompasses the physiographic and geologic transition zone between the Picuris Mountains and the San Luis Basin of the Rio Grande rift. The Embudo fault zone is the rift transfer structure that has accommodated the kinematic disparities between the San Luis Basin and the Española Basin during Neogene rift extension. The eastern terminus of the transfer zone coincides with the intersection of four major fault zones (Embudo, Sangre de Cristo, Los Cordovas, and Picuris-Pecos), resulting in an area of extreme geologic and hydrogeologic complexities in both the basin-fill deposits and the bedrock. Although sections of the Embudo fault zone are locally exposed in the bedrock of the Picuris Mountains and in the late Cenozoic sedimentary units along the top of the Picuris piedmont, the full proportions of the fault zone have remained elusive due to a pervasive cover of Quaternary surficial deposits. We combined insights derived from the latest geologic mapping of the area with deep borehole data and high-resolution aeromagnetic and gravity models to develop a detailed stratigraphic/structural model of the rift basin in the southern Taos Valley area. The four fault systems in the study area overlap in various ways in time and space. Our geologic model states that the Picuris-Pecos fault system exists in the basement rocks (Picuris formation and older units) of the rift, where it is progressively down dropped and offset to the west by each Embudo fault strand between the Picuris Mountains and the Rio Pueblo de Taos. In this model, the Miranda graben exists in the subsurface as a series of offset basement blocks between the Ponce de Leon neighborhood and the Rio Pueblo de Taos. In the study area, the Embudo faults are pervasive structures between the Picuris Mountains and the Rio Pueblo de Taos, affecting all geologic units that are older than the Quaternary surficial deposits. The Los Cordovas faults are thought to represent the late Tertiary to Quaternary reactivation of the old and deeply buried Picuris-Pecos faults. If so, then the Los Cordovas structures may extend southward under the Picuris piedmont, where they form growth faults as they merge downward into the Picuris-Pecos bedrock faults. The exceptionally high density of cross-cutting faults in the study area has severely disrupted the stratigraphy of the Picuris formation and the Santa Fe Group. The Picuris formation exists at the surface in the Miranda and Rio Grande del Rancho grabens, and locally along the top of the Picuris piedmont. In the subsurface, it deepens rapidly from the mountain front into the rift basin. In a similar manner, the Tesuque and Chamita Formations are shallowly exposed close to the mountain front, but are down dropped into the basin along the Embudo faults. The Ojo Caliente Sandstone Member of the Tesuque Formation appears to be thickest in the northwestern study area, and thins toward the south and the east. In the study area, the Lama formation thins westward and southward. The Servilleta Basalt is generally thickest to the north and northwest, thins under the Picuris piedmont, and terminates along a major, linear, buried strand of the Embudo fault zone, demonstrating that the Servilleta flows were spatially and temporally related to Embudo fault activity.

New Mexico↗

USGS1997

Digital data sets that describe aquifer characteristics of the alluvial and terrace deposits along the Beaver-North Canadian River from the panhandle to Canton Lake in northwestern Oklahoma

ARC/INFO export and nonproprietary format files This diskette contains digitized aquifer boundaries and maps of of hydraulic conductivity, recharge, and ground-water level elevation contours for the alluvial and terrace deposits along the alluvial and terrace deposits along the Beaver-North Canadian River from the panhandle to Canton Lake in northwestern Oklahoma. Ground water in 830 square miles of the Quaternary-age alluvial and terrace aquifer is an important source of water for irrigation, industrial, municipal, stock, and domestic supplies. The aquifer consists of poorly sorted, fine to coarse, unconsolidated quartz sand with minor amounts of clay, silt, and basal gravel. The hydraulically connected alluvial and terrace deposits unconformably overlie the Tertiary-age Ogallala Formation and Permian-age formations. Most of the lines in the aquifer boundary and recharge data sets and some of the lines in the hydraulic conductivity data set were extracted from a published digital surficial geology data set based on a scale of 1:250,000. The ground-water elevation contours and some of the lines for the aquifer boundary, hydraulic conductivity, and recharge data sets were digitized from a ground-water modeling report about the aquifer published at a scale of 1:250,000. The hydraulic conductivity values and recharge rates also are from the ground-water modeling report. The data sets are provided in both nonproprietary and ARC/INFO export file formats. Ground-water flow models are numerical representations that simplify and aggregate natural systems. Models are not unique; different combinations of aquifer characteristics may produce similar results. Therefore, values of hydraulic conductivity and recharge used in the model and presented in this data set are not precise, but are within a reasonable range when compared to independently collected data.

Oklahoma↗