USGS Science⌕ Search

SEARCH · USGS Science

Results for “Mineral Economics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26Linked to original sources
USGS1950

Water resources of the Cumberland area, Maryland-West Virginia

The area covered by this report consists of Garrett and Allegany Counties, the two most westernmost counties of Maryland, and Mineral County, West Virginia. The city of Cumberland, population 37,732 (1950 census), which is the economic and commercial center of the area, is on the North Branch pf the Potomac River in Allegany County. The report was prepared in response to a request from the United States Department of Commerce, which desired an appraisal of the water resources of the Cumberland atra in order to evaluate the effect of the availability of water on the economic development of the area. Accordingly, the purpose of this report is to summarize the available water information and to describe the hydrologic factors that affect the availability of water.

Maryland; West Virginia↗
USGS1953

Geology of the Plumtree area, Spruce Pine district, North Carolina

This report describes the results of study and geologic mapping (1:12,000) in the 70-square-mile Plumtree area in the northeastern part of the Spruce Pine pegmatite district, on the Blue Ridge upland in western North Carolina. The district has been the chief domestic source of feldspar and sheet mica. The mining belt just west of the Blue Ridge Front trends northeast and is 25 miles long and 10 miles wide. The center of the Plumtree area lies 10 miles northeast of Spruce Pine pegmatite district, on the Blue Ridge upland in western North Carolina. The district has been the chief domestic source of feldspar and sheet mica. The mining belt just west of the Blue Ridge Front trends northeast and is 25 miles long and 10 miles wide. The center of the Plumtree area lies 10 miles northeast of Spruce Pine and includes parts of Mitchell and Avery Counties shown on the portions of the 7.5-minute Spruce Pine, Linville Falls, Newland, North Carolina, and Carvers Gap, North Carolina and Tennessee quadrangle. The topography varies from rugged mountains to rounded or flat topped hills near the entrenched, meandering master streams. Old erosion surfaces are approximately 600,1,100, 1,500, and 2,500 feet above the present master stream level. The area is in late youth or early maturity after rejuvenation.. The regionally metamorphosed rocks of the amophibolite facies form three mappable units: mica gneiss, mica schist, and hornblende rock. These rocks, perhaps of Precambrian age, are intimately interlayered with thicknesses of the individual layers ranging from less than one inch to several tons of feet. Field relationships and chemical data suggest that the mica (Carolina-type) rocks were derived from sandstones, graywackes, and shales and that the hornblende-rich (Roan-type) layers were derived from impure carbonate rocks. The igneous rocks include alaskite and associated pegmatite of early Paleozoic age (?), dunite and associated soapstone of a prepegmatite age, and a few diabasic dikes of post-pegmatite age (Triassic?). The alaskite and pegmatite have similar bulk compositions, notably low in iron (0.3 percent). The major constituents in order of decreasing abundance are plagioclase, perthitic microcline, quartz, and muncovite. All of these minerals, as well as clay deposits derived from the weathering of alaskite under old terraces, have economic value. The zoned pegmatites contain fewer zones which are less complex mineralogically than those in the pegmatites of many other areas. These essentially unmetamorphosed bodies were intruded approximately at the peak of the regional metamorphism. Their emplacement was controlled by local structure and rock type. The source of this igneous material may have been the mobilized portions of the Cranberry gneiss which underlies the area. The dunite bodies were intruded early in the metamorphic cycle. The bodies are commonly zoned: from the wall rock inwards (1) talc-antrophyllite-serpentine fringe, (3) serpentinized dunite, (3) granular olivine core. Dunite, chromite, vermiculite, and anthophyllite are the major economic commodities. Extensive hydrothermal alteration of dunite bodies produced soapstone. The area is the northeast end of a southwest plunging synclinorium about 20 miles wide with the steeper limb on the northwest side. There are three structural zones: zone I on the northwest is characterized by the northeast-trending isoclinal folds with steep southeast dips; zone II on the southwest includes an area of rocks with low and variable dip; zone III is the complex central core. In the extreme northeast zones I and II have an indistinct boundary where they coalesce along the rim of the synclinorium. Six stratigraphic units are exposed totaling approximately 10,500 feet of metamorphic rocks. Small scale structural features include a foliation, and a lineation in the planes of the foliation. Minor folding reflects the trends of the major structures. There are randomly orient

Open-File Report↗
USGS2014

USGS ecosystem research for the next decade: advancing discovery and application in parks and protected areas through collaboration

Ecosystems within parks and protected areas in the United States and throughout the world are being transformed at an unprecedented rate. Changes associated with natural hazards, greenhouse gas emissions, and increasing demands for water, food, land, energy and mineral resources are placing urgency on sound decision making that will help sustain our Nation’s economic and environmental well-being (Millennium Ecosystem Assessment, 2005). In recognition of the importance of science in making these decisions, the U.S. Geological Survey (USGS) in 2007 identified ecosystem science as one of six science directions included in a comprehensive decadal strategy (USGS 2007). The Ecosystems Mission Area was identified as essential for integrating activity within the USGS and as a key to enhanced integration with other Federal and private sector research and management organizations (Myers at al., 2007). This paper focuses on benefits to parks and protected areas from the USGS Ecosystems Mission Area plan that expanded the scope of the original 2007 science strategy, to identify the Bureau’s work in ecosystem science over the next decade (Williams et al., 2013). The plan describes a framework that encompasses both basic and applied science and allows the USGS to continue to contribute meaningfully to conservation and management issues related to the Nation’s parks and ecological resources. This framework relies on maintaining long-standing, collaborative relationships with partners in both conducting science and applying scientific results. Here we summarize the major components of the USGS Ecosystems Science Strategy, articulating the vision, goals and strategic approaches, then outlining some of the proposed actions that will ultimately prove useful to those managing parks and protected areas. We end with a discussion on the future of ecosystem science for the USGS and how it can be used to evaluate ecosystem change and the associated consequences to management of our Nation’s natural resources.

The George Wright Forum↗
USGS1988

Physical deposit measures and commercial potential: The case of titanium-bearing heavy-mineral deposits

Physical measures of mineral deposit characteristics, such as grade and tonnage, long have been used in both subjective and analytic models to predict favorability of areas for the occurrence of mineral deposits of particular types. After a deposit has been identified, however, the explorationist must decide whether to continue data collection, begin an economic feasibility study, or abandon the prospect. The decision maker can estimate the probability that a deposit will be commercial by examining physical measures. The amount of sampling data required before such a probability estimate can be considered reliable can be determined. A logit probability model estimated from onshore titanium-bearing heavy-mineral deposit data identifies and quantifies the relative influence of a deposit's physical measures on the chances of the deposit becoming commercial. A principal conclusion that can be drawn from the analysis is that, along with a measure of deposit size, the characteristics most important in predicting commercial potential are grades of the constituent minerals. Total heavy-mineral-bearing sand grade or even total titanium grade (without data on constituent mineral grades) are poor predictors of the deposit's commercial potential. ?? 1988 International Association for Mathematical Geology.

Mathematical Geology↗
USGS2011

Development of industrial minerals in Colorado

Technology and engineering have helped make mining safer and cleaner for both humans and the environment. Inevitably, mineral development entails costs as well as benefits. Developing a mine is an environmental, engineering, and planning challenge that must conform to many Federal, State, and local regulations. Community collaboration, creative design, and best management practices of sustainability and biodiversity can be positive indicators for the mining industry. A better understanding of aesthetics, culture, economics, geology, climate, vegetation and wildlife, topography, historical significance, and regional land planning is important in resolving land-use issues and managing mineral resources wisely. Ultimately, the consuming public makes choices about product use (including water, food, highways, housing, and thousands of other items) that influence operations of the mineral industry. Land planners, resource managers, earth scientists, designers, and public groups have a responsibility to consider sound scientific information, society's needs, and community appeals in making smart decisions concerning resource use and how complex landscapes should change. An effort to provide comprehensive geosciences data for land management agencies in central Colorado was undertaken in 2003 by scientists of the U.S. Geological Survey and the Colorado Geological Survey. This effort, the Central Colorado Assessment Project, addressed a variety of land-use issues: an understanding of the availability of industrial and metallic rocks and minerals, the geochemical and environmental effects of historic mining activity on surface water and groundwater, and the geologic controls on the availability and quality of groundwater. The USDA Forest Service and other land management agencies have the opportunity to contribute to the sustainable management of natural aggregate and other mineral resources through the identification and selective development of mineral resources and the reclamation of mines on lands that they administer. The information in this Circular will help them carry out that task.

Colorado↗
USGS1975

Geology of the Midnite uranium mine, Stevens County, Washington; a preliminary report

The Midnite mine is one of only two mines in the United States currently producing uranium from discordant deposits in crystalline host rocks. Ore bodies are in metamorphosed steeply dipping Precambrian pelitic and calcareous rocks of a roof pendant adjacent to a Cretaceous(?) porphyritic quartz monzonite pluton. Production during 14 years, of operation has been about 8 million pounds of U3O8 from oxidized and reduced ores averaging 0.23 percent U3O8. Uranium deposits are generally tabular in form and dimensions range up to 380 m long, 210 m wide, and 50 m thick. Deposits are bounded on at least one side by unmineralized intrusive ribs of granitic rock, and thickest mineralized zones invariably occur at depressions in the intrusive contact. Upper limits of some deposits are nearly horizontal, and upper elevations of adjacent mineralized zones separated by ribs of granite are similar. Near surface ore is predominantly autunite, but ore at depth consists of pitchblende and coffinite with abundant pyrite and marcasite. Uranium minerals occur as .disseminations along foliation, replacements, and stockwork fracture-fillings. No stratigraphic controls on ore deposition are recognized. Rather, mineralized zones cut across lithologic boundaries if permeability is adequate. Most ore is in muscovite schist and mica phyllite, but important deposits occur in calc-silicate hornfels. Amphibolite sills and mid-Tertiary dacite dikes locally, carry ore where intensely fractured. High content of iron and sulfur, contained chiefly in FeS2, appear to be an important feature of favorable host rocks. Geometry of deposits, structural, and geochemical features suggest that uranium minerals were deposited over a span of time from late Cretaceous to late Tertiary. Ore occurs in but is not offset by a shear zone that displaces mid-Tertiary rocks.. Economic zones of uranium are interpreted to have been secondarily enriched in late Tertiary time by downward and lateral migration of uranium into permeable zones where deposition was influenced by ground water controls and minerals that could reduce or neutralize uranium-bearing solutions.

Open-File Report↗
USGS2013

The giant Pebble Cu-Au-Mo deposit and surrounding region, southwest Alaska: Introduction

The Pebble deposit is located about 320 km southwest of and 27 km northwest of the village of Iliamna in Alaska (Fig. 1A). It is one of the largest porphyry deposits in terms of contained Cu (Fig. 2A) and it has the largest Au endowment of any porphyry deposit in the world (Fig. 2B). The deposit comprises the Pebble West and Pebble East zones that represent two coeval hydrothermal centers within a single system (Lang et al., 2013). Together the measured and indicated resources total 5,942 million metric tons (Mt) at 0.42% Cu, 0.35 g/t Au, and 250 ppm Mo with an inferred resource of 4,835 Mt at 0.24% Cu, 0.26 g/t Au, and 215 ppm Mo. In addition, the deposit contains significant concentrations of Ag, Pd, and Re (Northern Dynasty Minerals, 2011).

Alaska↗
USGS1971

Models of mineralized solution-collapse structures from drilling statistics: An aid to exploration

Variations in thickness and metal content of selected stratigraphic units cut by drill holes in the East Tennessee zinc districts have been analyzed by regression techniques. Such analysis demonstrated that as the thickness of an underlying limestone unit is decreased chiefly by solution thinning, overlying fine-grained dolomite units increase in thickness by collapse dilation. Variation in metal content is closely associated with this inverse thickness relationship because of the deposition of the ore minerals in the dilation openings. Most of the ore is found where the fine-grained dolomite units were so dilated by collapse as to form a series of rubble to crackle breccias. Hypothetical cross sections synthesized from widely spaced drill-hole data show mineralized structures of a size, shape, and distribution of metal comparable to those diagrammed in the literature from actual field relations. From these composite models of hypothetical structures the relative position of a particular hole can be approximated within its own structure. The exploration geologist thus has a numerical aid for estimating the amounts of offset needed to penetrate the most favorable part of the mineralized collapse structure with second-stage drill holes.

Economic Geology↗
USGS2003

Geophysical and isotopic constraints on crustal structure related to mineral trends in north-central Nevada and implications for tectonic history

We combined information from Sr and Pb isotope data and magnetotelluric models to develop a new magnetic and gravity interpretation of the crustal structure of north - central Nevada to better understand the origin of mineral trends . The new interpretation suggests a crustal structure that is composed of Precambrian continental crust, transitional crust, and primarily oceanic crust that are separated by northwest- and northeast-striking fault zones. The magnetic expression of the buried Precambrian continental crust is recognized for the first time. Low magnetic values primarily reflect magnetite-poor crystalline crust rather than elevated temperatures at depth. Northwest- and northeast-striking crustal boundaries are defined by isotopic data and abrupt gradients in gravity and magnetic data. The Carlin and Battle Mountain-Eureka mineral trends are associated with two of three northwest-striking boundaries. The Carlin boundary is primarily defined by a change in density and isotopic character of the lower to middle crust. The Battle Mountain-Eureka boundary coincides with a density contrast in the upper crust and a change in isotopic character in the lower to middle crust. Magnetotelluric models suggest that the Battle Mountain-Eureka boundary represents a crustal fault zone for most of its extent, but that deep-rooted faulting is more complex near and northwest of Battle Mountain. Crustal fault zones inferred from the magnetotelluric models near the Carlin trend are oblique to it, suggesting that they may not have been controlled by the deep boundary seen in the gravity and isotopic data. The third northwest-trending boundary is related to the western edge of the buried Precambrian continent in west- central Nevada , but lacks an associated mineral trend . A northeast-striking boundary forms the northern limit of Precambrian continental and transitional crust. The boundaries may have originated as rift or transform faults during Precambrian breakup of Rodinia or as faults accommodating lateral movements or accretion during later Paleozoic tectonic events. Comparing the crustal structure to tectonic elements produced by successively younger events shows that it had a profound influence on subsequent sedimentation, deformation, magmatism, extension, and most important, mineralization.

Nevada↗
USGS2006

Typing mineral deposits using their associated rocks, grades and tonnages using a probabilistic neural network

A probabilistic neural network is employed to classify 1610 mineral deposits into 18 types using tonnage, average Cu, Mo, Ag, Au, Zn, and Pb grades, and six generalized rock types. The purpose is to examine whether neural networks might serve for integrating geoscience information available in large mineral databases to classify sites by deposit type. Successful classifications of 805 deposits not used in training - 87% with grouped porphyry copper deposits - and the nature of misclassifications demonstrate the power of probabilistic neural networks and the value of quantitative mineral-deposit models. The results also suggest that neural networks can classify deposits as well as experienced economic geologists. ?? International Association for Mathematical Geology 2006.

Mathematical Geology↗
USGS2007

Source and redox controls on metallogenic variations in intrusion-related ore systems, Tombstone-Tungsten Belt, Yukon Territory, Canada

The Tombstone, Mayo and Tungsten plutonic suites of granitic intrusions, collectively termed the Tombstone-Tungsten Belt, form three geographically, mineralogically, geochemically and metallogenically distinct plutonic suites. The granites (sensu lato) intruded the ancient North American continental margin of the northern Canadian Cordillera as part of a single magmatic episode in the mid-Cretaceous (96-90 Ma). The Tombstone Suite is alkalic, variably fractionated, slightly oxidised, contains magnetite and titanite, and has primary, but no xenocrystic, zircon. The Mayo Suite is sub-alkalic, metaluminous to weakly peraluminous, fractionated, but with early felsic and late mafic phases, moderately reduced with titanite dominant, and has xenocrystic zircon. The Tungsten Suite is peraluminous, entirely felsic, more highly fractionated, reduced with ilmenite dominant, and has abundant xenocrystic zircon. Each suite has a distinctive petrogenesis. The Tombstone Suite was derived from an enriched, previously depleted lithospheric mantle, the Tungsten Suite is from the continental crust including, but not dominated by, carbonaceous pelitic rocks, and the Mayo Suite is from a similar sedimentary crustal source, but is mixed with a distinct mafic component from an enriched mantle source. Each suite has a distinctive metallogeny that is related to the source and redox characteristics of the magma. The Tombstone Suite has a Au-Cu-Bi association that is characteristic of most oxidised and alkalic magmas, but also has associated, and enigmatic, U-Th-F mineralisation. The reduced Tungsten Suite intrusions are characterised by world-class tungsten skarn deposits with less significant Cu, Zn, Sn and Mo anomalies. The Mayo Suite intrusions are characteristically gold-enriched, with associated As, Bi, Te and W associations. All suites also have associated, but distal and lower temperature Ag-Pb- and Sb-rich mineral occurrences. Although processes such as fractionation, volatile enrichment and phase separation are ultimately required to produce economic concentrations of ore elements from crystallising magmas, the nature of the source materials and their redox state play an important role in determining which elements are effectively concentrated by magmatic processes.

Transactions of the Royal Society of Edinburgh, Ea↗
USGS2004

Source and redox controls on metallogenic variations in intrusion-related ore systems, Tombstone-Tungsten Belt, Yukon Territory, Canada

The Tombstone, Mayo and Tungsten plutonic suites of granitic intrusions, collectively termed the Tombstone-Tungsten Belt, form three geographically, mineralogically, geochemically and metallogenically distinct plutonic suites. The granites (sensu lato) intruded the ancient North American continental margin of the northern Canadian Cordillera as part of a single magmatic episode in the mid-Cretaceous (96-90 Ma). The Tombstone Suite is alkalic, variably fractionated, slightly oxidised, contains magnetite and titanite, and has primary, but no xenocrystic, zircon. The Mayo Suite is sub-alkalic, metaluminous to weakly peraluminous, fractionated, but with early felsic and late mafic phases, moderately reduced with titanite dominant, and has xenocrystic zircon. The Tungsten Suite is peraluminous, entirely felsic, more highly fractionated, reduced with ilmenite dominant, and has abundant xenocrystic zircon. Each suite has a distinctive petrogenesis. The Tombstone Suite was derived from an enriched, previously depleted lithospheric mantle, the Tungsten Suite is from the continental crust including, but not dominated by, carbonaceous pelitic rocks, and the Mayo Suite is from a similar sedimentary crustal source, but is mixed with a distinct mafic component from an enriched mantle source. Each suite has a distinctive metallogeny that is related to the source and redox characteristics of the magma. The Tombstone Suite has a Au-Cu-Bi association that is characteristic of most oxidised and alkalic magmas, but also has associated, and enigmatic, U-Th-F mineralisation. The reduced Tungsten Suite intrusions are characterised by world-class tungsten skarn deposits with less significant Cu, Zn, Sn and Mo anomalies. The Mayo Suite intrusions are characteristically gold-enriched, with associated As, Bi, Te and W associations. All suites also have associated, but distal and lower temperature Ag-Pb-and Sb-rich mineral occurrences. Although processes such as fractionation, volatile enrichment and phase separation are ultimately required to produce economic concentrations of ore elements from crystallising magmas, the nature of the source materials and their redox state play an important role in determining which elements are effectively concentrated by magmatic processes.

Conference Paper↗
USGS2007

Peru Mercury Inventory 2006

In 2004, a specific need for data on mercury use in South America was indicated by the United Nations Environmental Programme-Chemicals (UNEP-Chemicals) at a workshop on regional mercury pollution that took place in Buenos Aires, Argentina. Mercury has long been mined and used in South America for artisanal gold mining and imported for chlor-alkali production, dental amalgam, and other uses. The U.S. Geological Survey (USGS) provides information on domestic and international mercury production, trade, prices, sources, and recycling in its annual Minerals Yearbook mercury chapter. Therefore, in response to UNEP-Chemicals, the USGS, in collaboration with the Economic Section of the U.S. Embassy, Lima, has herein compiled data on Peru's exports, imports, and byproduct production of mercury. Peru was selected for this inventory because it has a 2000-year history of mercury production and use, and continues today as an important source of mercury for the global market, as a byproduct from its gold mines. Peru is a regional distributor of imported mercury and user of mercury for artisanal gold mining and chlor-alkali production. Peruvian customs data showed that 22 metric tons (t) of byproduct mercury was exported to the United States in 2006. Transshipped mercury was exported to Brazil (1 t), Colombia (1 t), and Guyana (1 t). Mercury was imported from the United States (54 t), Spain (19 t), and Kyrgyzstan (8 t) in 2006 and was used for artisanal gold mining, chlor-alkali production, dental amalgam, or transshipment to other countries in the region. Site visits and interviews provided information on the use and disposition of mercury for artisanal gold mining and other uses. Peru also imports mercury-containing batteries, electronics and computers, fluorescent lamps, and thermometers. In 2006, Peru imported approximately 1,900 t of a wide variety of fluorescent lamps; however, the mercury contained in these lamps, a minimum of approximately 76 kilograms (kg), and in other products such as batteries and computer electronics is not recycled and may ultimately be released to the environment.

Open-File Report↗
USGS1979

Base and precious metal occurrences along the San Andreas Fault, Point Delgada, California

Previously unrecognized veins containing lead, zinc, and copper sulfide minerals at Point Delgada, Calif., are associated with late Mesozoic(?) and Tertiary volcanic and sedimentary rocks of the Franciscan assemblage. Sulfide minerals include pyrite, sphalerite, galena, and minor chalcopyrite, and galena-rich samples contain substantial amounts of silver. These minerals occur in a quartz-carbonate gangue along northeast-trending faults and fractures that exhibit (left?) lateral and vertical slip. The sense of fault movement and the northeasterly strike are consistent with predicted conjugate fault sets of the present San Andreas fault system. The sulfide mineralization is younger than the Franciscan rocks of Point Delgada and King Range, and it may have accompanied or postdated the inception of San Andreas faulting. Mineralization largely preceded uplift, the formation of a marine terrace, and the emplacement of landslide-related debris-flow breccias that overlie the mineralized rocks and truncate the sulfide veins. These field relations indicate that the sulfide mineralization and inception of San Andreas faulting were clearly more recent than the early Miocene and that the mineralization could be younger than about 1.2 m.y. The sulfide veins at Point Delgada may be of economic significance. However, prior to any exploitation of the occurrence, economic and environmental conflicts of interest involving private land ownership, the Shelter Cove home development, and proximity of the coast must be resolved.

California↗
USGS1990

Hamdah ancient gold mines, Kingdom of Saudi Arabia

The Hamdah prospect is a 1.5-km 2 area that includes ancient mine workings 15 km southeast of Hamdah in the southern Arabian Shield. The workings cluster at a gently dipping thrust contact between serpentinite (above) and hornblende schist (below) exposed in a window within the serpentinite. Aplite sills intrude the contact, and gold concentrations occur just above or below it. The ancient mine dumps cover >100,000 m 2 of the prospect and are estimated to be 1.5 to 1.8 m thick. They contain nearly 181,000 metric tons of material at an average grade of 4.5 g/t gold, thus having an estimated total gold content of 831 kg, or 26,726 Troy oz. Almost 100 percent of the contained gold is recoverable by cyanide acid leaching. Eleven new diamond-drill holes were completed to supplement information from 12 drill holes completed during an earlier drilling program, in order to enable more detailed evaluation of the prospect. The drill holes are grouped in the northeast, southeast, southwest, and west quadrants of the prospect. In the northeast quadrant, where 9 drill holes intersect gold at shallow (<27 m) depths, the quadrant is calculated to contain nearly 242,300 metric tons of gold-bearing material. The calculations show: (1) 19,144 metric tons high-grade material grading 21.4 g/t Au at 5 g/t cutoff; (2) 39,884 metric tons of material grading 8.5 g/t Au at 5 g/t cutoff; (3) 71,617 metric tons of material grading 3.9 g/t Au at 1 g/t cutoff; and (4) 111,641 metric tons low-grade material grading 2.0 g/t Au at 1 g/t cutoff. Total gold content of this selected block is 1,251 kg gold, or 40,234 Troy oz. The mineralized zone in 1 the northeast quadrant is open to the northeast, east, and southeast. Drill data are insufficient in detail to allow grade or tonnage estimates for the southeast, southwest, and west quadrants of the prospect. Gold is concentrated in surface alluvium in the southeast and southwest of the prospect, in amounts that are of possible economic significance. Ground geophysical surveys (CEM and VJJ7) revealed the presence of electrical conductors at shallow depths, some of which correlate with possible disseminated sulfide minerals, and others with the thrust contact. It is recommended that the thickness of the dumps be more accurately determined, and that the gold leachability of bulk dump material be tested. Shallow reverse-circulation drilling is recommended on 25-m centers in the northeast quadrant, and diamond drilling is recommended elsewhere at the prospect. Geophysical surveys are required to help establish depths to the serpentinite/schist contact on the northeastern, southern, and western margins of the prospect. Detailed mapping should be undertaken at the prospect, and a mineral-belt type of mapping program should be completed over the larger Hamdah region.

Open-File Report↗
USGS1972

Geology and mineral deposits of the Jabal ash Shumta quadrangle, Kingdom of Saudi Arabia

Rocks, structures, and mineral deposits which are the result of both the older Halaban petro-tectonic cycle and the younker Najd Wrench Fault deformation are present in the Ash Shumta area. Northward-trending belts of granitic rocks and folded, layered metavolcanic and metasedimentary rocks of the Halaban Formation which they intrude represent the effects of the Halaban cycle. These older rocks are everywhere transected and deformed by northwestward- and northeastward-striking fractures and strike-slip faults and by eastward-striking fractures and fracture-controlled silicic dikes which belong to the Najd Wrench Fault deformation. Several kinds of epigenetic mineral deposits of hydrothermal origin are present throughout the Ash Shumta area. All occur in or ape closely associated with structures of the Najd Wrench Fault deformation. The mineralization which produced the deposits is thought to have taken place during the period of deformation which produced the Najd Wrench Fault structures. The hydrothermal deposits include many metalliferous quartz veins most of which occur in three mineralized areas: two major areas at Jabal Ash Shumta and Jabal El Khom in the northern half of the quadrangle and a minor area along Wadj al Boharah in the southeastern part of the quadrangle. The metalliferous lodes possess the only economic potential in the area of the Jabal Ash Shumta quadrangle. These lodes consist mainly of gold and base metal-bearing quartz veins, some of which were mined for gold in ancient times. The mineralized area at Jabal Ash Shumta has the best of these veins. Higher temperature veins with wolframite as a major constituent and beryl as a minor one occur in a granite cupola in the eastern part of the El Khom area. These veins have altered, gneissen-like wall rocks. Although the grade of the veins is low at the surface, the made could increase at depth. The tungsten-bearing veins and El Khom area possess the greatest economic promise in the Jabal Ash Shumta quadrangle. They deserve detailed surface investigation followed if needed by exploration at depth.

Open-File Report↗
USGS1969

Massive sulfide deposits and volcanism

Massive sulfide deposits, consisting of pyrite and/or pyrrhotite and various ratios of chalcopyrite, sphalerite, and galena, are commonly associated with volcanic rocks that accumulated in eugeosynclines. Later deformation may leave an imprint of regional metamorphism. Two-thirds of the deposits mentioned in this review are about equally divided between silicic and mafic volcanic host rocks, and the remainder occur in tuffaceous sedimentary rocks interbedded with volcanics. Little compelling evidence is available to relate genetically most of these deposits to granitic rocks, whereas considerable evidence supports a complex genetic relationship to volcanic rocks that accumulated in a submarine environment. Some deposits apparently formed during or soon after emplacement of the volcanic rocks, and possibly involved early deposition of pyrite that was followed later by the addition of base metals. The transporting agents of the base metals and some of the sulfur are heated solutions probably of different origins containing alkali chlorides as well as alkali chloride brines. Pyrite and base metals may have been deposited during the accumulation of the volcanic and associated rocks, or later during diagenesis, regional metamorphism, or intrusion of granitic plutons. The source of the base metals may have been: (1) early metal concentrations distributed through the volcanic pile, (2) trace quantities in the silicate minerals in the volcanics, or (3) later crystallizing magma.

Economic Geology↗