USGS ScienceSearch

SEARCH · USGS Science

Results for “Journal of Open Source Education”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,683 records · Page 26Linked to original sources

AAPG Energy and Minerals Division Tight Oil and Gas Committee Activities and Commodity Report for 2021-2022: Tuscaloosa Marine Shale, Gulf Coast basin, Louisiana and Mississippi

The Upper Cretaceous Tuscaloosa marine shale (TMS) potential production area encompasses 20.4 million acres across central Louisiana (LA), southern Mississippi (MS), southwestern Alabama (AL), and a small southwestern section of the Florida panhandle (Hackley et al., 2018). It remains a minor and largely undeveloped unconventional shale oil play with production from the TMS confined along the east-west LA-MS State boundary (Fig. 1). The mean undiscovered, technically recoverable resources in the TMS are estimated at 1.5 billion barrels of oil and 4.6 trillion cubic feet of gas (Hackley et al., 2018). Geochemical analyses of source rock solvent extracts and oil samples indicate that, in the play area, the TMS is the primary source of shale oil produced from the TMS as well as of accumulated oils in the underlying conventional reservoirs of the lower Tuscaloosa (Hackley et al., 2020). The API gravity of TMS oils ranges from approximately 34 to 46 degrees (Hackley et al., 2020; Croke et al., 2020).

AAPG Wiki

3D Converted wave reverse time migration imaging

We describe a newly developed method for recovering high-resolution images of seismic discontinuities, such as subducting slabs, in 3D. Our method makes use of converted S → P or P → S waves observed by dense arrays of seismometers to infer the locations and relative strengths of seismic discontinuities at depth in a target region. Observed direct and converted waves are backpropagated to their times of origin. The time-reversed wavefield is then separated into its constituent P and S components via the Helmholtz decomposition, and those separated wavefields are used to compute imaging functions that characterize the locations and relative strengths of seismic discontinuities. Imaging functions may be designed to use either S → P or P → S waves, so that users can target those arrivals expected to be most dominant in a given dataset. We have previously demonstrated the efficacy of our method in two dimensions, and we now present a 3D implementation of our technique which addresses the significant computational challenges posed by the size of volumetric wavefield data in three dimensions. Through a series of synthetic examples, we demonstrate that our method is capable of recovering the fine scale structure of a subducting slab given realistic station coverage and earthquake sources. We investigate optimal seismic station geometries for our technique and explore image interpretability in regions with poor data coverage. We find that linear station geometries yield more optimal, interpretable imaging functions than collections of small arrays can. We also show that our method can successfully recover bothS → P or P → S images when realistic shear earthquake sources are used, and we explore the additional computational challenges presented by the high frequency content of S waves. Our results demonstrate the potential for our technique to recover high-resolution information about subducting slabs in real-world regions, given that relatively sparse seismic arrays with only approximately 100 stations are capable of recovering interpretable imaging functions from just a few realistic earthquake sources for multiple discontinuities at significant depth in an area of approximately 400~sq~km.

Seismica

The δ13C signature of dissolved organic and inorganic carbon reveals complex carbon transformations within a salt marsh

Coastal wetlands have high rates of atmospheric CO 2 uptake, which is subsequently respired back to the atmosphere, stored as organic matter within flooded, anoxic soils, or exported to the coastal ocean. Transformation of fixed carbon occurs through a variety of subsurface aerobic and anaerobic microbial processes, and results in a large inventory of dissolved carbon. Carbon source and the roles of aerobic respiration, sulfate reduction, and methane cycling were evaluated within salt marsh peat and the underlying sandy subterranean estuary. There is a large increase in dissolved inorganic carbon (DIC, 7,350 ± 3,900 μmol L −1 ), dissolved organic carbon (DOC, 1,040 ± 1,480 μmol L −1 ) and CH 4 (14.5 ± 33.3 μmol L −1 ) within the marsh porewaters compared to creek waters. Alkalinity production (5,730 ± 2,170 μeq L −1 ) and sulfate removal (1,810 ± 1,970 μmol L −1 ) indicate anaerobic respiration, however, relative contributions from the various decomposition pathways cannot be identified due to overlapping geochemical signatures. The δ 13 C of the DOC (−29.0 ± 3.7‰) and DIC (−11.2 ± 1.1‰) produced within the marsh differed from the bulk soil organic matter δ 13 C (−14.5 ± 0.2‰). We explore a variety of mechanisms that could result in co-occurring depleted δ 13 C-DOC and enriched δ 13 C-DIC compared to the bulk soil organic carbon pool and salt marsh vegetation, including selective mineralization, production of δ 13 C-depleted bacterial biomass, and methane-derived DOC. While important questions remain about carbon cycling pathways, we found evidence of a cryptic methane cycle. Alteration of the δ 13 C of carbon species complicates source attribution in solid and dissolved phases and careful consideration should be used when carbon is partitioned between in situ salt marsh production and external marine and terrestrial sources.

Massachusetts

Efficient physics‐informed ground‐motion simulations with reduced‐order models: CyberShake implications and high‐resolution site terms for southern San Andreas fault earthquakes

Recent advances in Probabilistic Seismic Hazard Analysis (PSHA) leverage physics‐based ground‐motion simulations to estimate seismic hazard, such as the CyberShake project. However, computational costs quickly escalate when performing PSHA for numerous faults or sites and can become prohibitively expensive. To reduce computational demands, CyberShake uses reciprocity and interpolates physics‐informed corrections from simulations conducted at fewer locations, but the accuracy of these interpolations remains poorly quantified. To quantify the interpolation accuracy, we derive high‐resolution, frequency‐dependent site terms for southern California and compare them with interpolated site terms using the CyberShake approach. We accomplish this by performing a set of earthquake point‐source simulations distributed along the nonplanar fault geometry for the southern San Andreas fault (SSAF) extending from Bombay Beach to Lake Hughes. Using SeisSol, we simulate three minutes of viscoelastic seismic wave propagation for these sources and store the horizontal‐component Green’s functions for 480,000 sites. We then use a scientific machine learning approach based on interpolated proper orthogonal decomposition to construct an accurate reduced‐order model of the Green’s functions to efficiently predict effective amplitude spectra (EAS) for finite‐source rupture models of SSAF earthquakes. Using minimum curvature interpolation with tension, as used in CyberShake, we compare the interpolated site terms against our high‐resolution site terms. We identify local discrepancies with EAS differing by up to a factor of approximately three. Furthermore, we identify locations where unexpectedly high or low ground motions are missed when using the interpolated dataset for these earthquakes. We estimate that our approach may be used within CyberShake to reduce the time‐to‐solution by a factor of 336 for the entire earthquake rupture forecast. Our analysis of physics‐based site terms provides more insight into the seismic hazard due to SSAF ruptures and guides future developments by combining high‐performance computing and reduced‐order modeling techniques for PSHA.

California

Multiple-well monitoring site adjacent to the Midway- Sunset and Buena Vista Oil Fields, Kern County, California

Groundwater quality in and around oil fields in the Southern San Joaquin Valley is of interest to many California residents that rely heavily on groundwater for domestic, commercial, and agricultural use. To help assess the effects of historical oil-field activities and natural geologic sources on groundwater near the southwest margins of the Kern County Groundwater Subbasin, a multiple-well monitoring site was installed near the administrative boundary between the Midway-Sunset and Buena Vista Oil Fields in Kern County, California. The installation of the Midway-Sunset Buena Vista multiple-well monitoring site (MSBV) supports regional analysis of the relations of oil and gas sources to groundwater quality by providing information about the geology, hydrology, geophysical properties, and water quality of the alluvial and upper Tulare aquifers in areas where groundwater data were limited. Data collected from the site included drill cuttings, whole core samples, sidewall core samples, mud-gas analysis, borehole geophysical logs, depth to water measurements, and water quality samples. Whole cores were scanned using dual energy computed tomography. Subsamples of selected cores were analyzed for density, porosity, specific retention, and bulk minerology. Thin sections of the subsamples were prepared, photographed, and examined. Two samples were analyzed using scanning electron microscope technology to examine the microporosity of diatomite laden sediment. Instrumentation installed in the wells collect hourly depth to water measurements. Analysis of the data show there is 355 feet of alluvium overlying the Tulare Formation at the well site. The contact between the two formations is an aquitard resulting in a perched aquifer in the alluvium and unconfined aquifer in the Tulare Formation. The alluvium is more heterogenous and finer grained than the Tulare Formation resulting in markedly higher porosity in the alluvium compared to the Tulare Formation. Higher specific retention observed in the alluvium is attributed to the finer grained sediment and greater abundance of reworked diatomite (as represented by opal-CT [cristobalite-tridymite]) compared to the Tulare Formation. Total dissolved solids (TDS) approached or exceeded 10,000 milligrams per liter (mg/L) in the alluvium from approximately 176 to 242 feet below land surface and at the top of the Amnicola clay at approximately 670 feet below land surface within the Tulare Formation. Elevated TDS, chloride, and boron concentrations in the alluvium and on top of the Amnicola clay likely reflect groundwater that is mixed with oil-field water. Water chemistry and modern-aged groundwater in the alluvial monitoring well (MSBV #3) are consistent with the oil-field water in the alluvium being derived from documented historical surface disposal of oil-field water upslope (northwest) of the site. Water chemistry and pre-modern groundwater age in the deeper Tulare monitoring well (MSBV #1) on top of the Amnicola clay are consistent with oil-field fluids derived from upslope natural geologic sources or old oil wells that leak in the subsurface. Shallow groundwater in the Tulare (MSBV #2) is not affected by mixing with oil-field sources.

EarthArXiv

Groundwater flowpath characteristics drive variability in per- and polyfluoroalkyl substances (PFAS) loading across a stream-wetland system

Groundwater-dependent ecosystems in areas with industrial land use are at risk of exposure to a PFAS chemicals. We investigated one such system with several known PFAS source areas, where high and low permeability sediments (glacial) coupled with groundwater-lake and groundwater/surface-water interactions created complex ‘source to seep’ dynamics. Using heat-tracing and chemical methods, numerous preferential groundwater discharge zones were identified and sampled across the upper Quashnet River stream-wetland system in Mashpee, MA, USA, downgradient of Joint Base Cape Cod (JBCC). Surface-water and groundwater samples were analyzed for 40 PFAS compounds between March and October 2022. Samples were collected from groundwater seeps identified as preferential discharge points (PDPs), wells upgradient of the stream-wetland system, contributing flow-through kettle lakes, and along Quashnet River surface-waters. PFAS from sampled waters contained perfluorinated carboxylates (PFPea, PFHxA, PFNA), perfluorinated sulfonates (PFBS, PFPeS, PFHxS, PFOS), fluorotelomer sulfonates (6:2, 8:2 FtS), and perfluoroalkyl sulfonamides (PFOSA). Samples from PDPs and wells had measured PFAS concentrations ranging from non-detect to 4677 ng/L ng/L (mean = 418 ng/L, std. = 709 ng/L), and a range of deuterium excess values (3.2 to 15.9 per mil) indicative of varying degrees of groundwater-lake interaction prior to groundwater flowpath emergence at PDPs. Correlations ( p < 0.01) between deuterium excess, %PFAS precursors, and terminal PFAS compounds highlighted potential precursor transformations associated with lake-groundwater exchange along flowpaths sourcing PDPs. However, some seepages had higher total PFAS concentrations (>1000 ng/L) than upgradient kettle lakes despite showing lake (evaporative) isotopic signatures, indicating the potential for groundwater flowpath convergence at wetland discharge zones and the influence of lakebed PFAS precursor reactions. Results from these synoptic surveys address gaps in the existing PFAS literature by demonstrating the importance of subsurface fate and transport on PFAS compound concentrations and mass loading in preferential groundwater discharge zones.

Massachusetts

(Re)discovering the seismicity of Antarctica: A new seismic catalog for the southernmost continent

We apply a machine learning (ML) earthquake detection technique on over 21 yr of seismic data from on‐continent temporary and long‐term networks to obtain the most complete catalog of seismicity in Antarctica to date. The new catalog contains 60,006 seismic events within the Antarctic continent for 1 January 2000–1 January 2021, with estimated moment magnitudes (⁠Mw ⁠) between −1.0 and 4.5. Most detected seismicity occurs near Ross Island, large ice shelves, ice streams, ice‐covered volcanoes, or in distinct and isolated areas within the continental interior. The event locations and waveform characteristics indicate volcanic, tectonic, and cryospheric sources. The catalog shows that Antarctica is more seismically active than prior catalogs would indicate, examples include new tectonic events in East Antarctica, seismic events near and around the vicinity of David Glacier, and many thousands of events in the Mount Erebus region. This catalog provides a resource for more specific studies using other detection and analysis methods such as template matching or transfer learning to further discriminate source types and investigate diverse seismogenic processes across the continent.

Seismological Research Letters

Stable isotope composition and geochemistry of calcite and dolomite in the Mountain Pass carbonatite: A lens into petrogenesis

Carbonatites host most of the global rare earth element (REE) deposits. The petrogenesis of these rocks, including magmatic and post-magmatic processes, are poorly understood but critical in forming and upgrading these deposits. The Mountain Pass carbonatite, which hosts the only active REE mine in North America, is lithologically variable but consistently contains >50% calcite and/or dolomite. Multiple generations of carbonates are evident, suggesting bulk analysis of carbonate minerals would generate a mixed isotopic and geochemical signature. In-situ stable carbon and oxygen isotopes, combined with geochemical analysis and petrography, distinguish carbonate generations, trace the source region of the carbonatite magma, and link carbonate genesis to REE mineralization throughout the intrusion. Primary carbon and oxygen isotope values outside the accepted mantle range may suggest a subduction-related carbon and oxygen source in the mantle. Deformation textures in primary calcite indicate syn- or post-crystallization ductile flow. Carbonates with secondary textures and heavy δ 13 C and δ 18 O values are associated with ore mineralization, suggesting fluid mobilization was important in concentrating REE and upgrading of the Mountain Pass deposit.

California

The SCEC/USGS community stress drop validation study using the 2019 Ridgecrest earthquake sequence

We introduce a community stress drop validation study using the 2019 Ridgecrest, California, earthquake sequence, in which researchers are invited to use a common dataset to independently estimate comparable measurements using a variety of methods. Stress drop is the change in average shear stress on a fault during earthquake rupture, and as such is a key parameter in many ground motion, rupture simulation, and source physics problems in earthquake science. Spectral stress drop is commonly estimated by fitting the shape of the radiated energy spectrum, yet estimates for an individual earthquake made by different studies can vary hugely. In this community study, sponsored jointly by the U. S. Geological Survey and Southern/Statewide California Earthquake Center, we seek to understand the sources of variability and uncertainty in earthquake stress drop through quantitative comparison of submitted stress drops. The publicly available dataset consists of nearly 13,000 earthquakes of M1 to 7 from two weeks of the 2019 Ridgecrest sequence recorded on stations within 1-degree. As a community study, findings are shared through workshops and meetings and all are invited to join at any time, at any interest level.

Seismica

Hydrology and water and sediment quality at James Campbell National Wildlife Refuge near Kahuku, Island of Oahu, Hawaii

The James Campbell National Wildlife Refuge occupies two lowland marsh and pond complexes on the northern coastal plain of Oahu: the mostly natural ponds and wetlands of the Punamano Unit and the constructed ponds of the Kii Unit. The U.S. Fish and Wildlife Service manages the Refuge primarily to protect and enhance habitat for four endangered species of Hawaiian waterbirds. Kii Unit is fed by artesian wells and rainfall, whereas Punamano Unit is fed naturally by rainfall, runoff, and ground-water seepage. Streams drain from the uplands into lowland ditches that pass through Kii Unit on their way to the ocean. A high-capacity pump transfers water from the inner ditch terminus at Kii to the ocean outlet channel. Stormwaters also exit the inner ditch system over flood-relief swales near the outlet pump and through a culvert with a one-way valve. A hydrologic investigation was done from November 1996 through February 1998 to identify and quantify principal inflows and outflows of water to and from the Refuge, identify hydraulic factors affecting flooding, document ground-water/surface-water interactions, determine the adequacy of the current freshwater supply, and determine water and sediment quality. These goals were accomplished by installing and operating a network of stream-gaging stations, meteorology stations, and shallow ground-water piezometers, by computing water budgets for the two Refuge units, and by sampling and analyzing water and pond-bottom sediments for major ions, trace metals, and organic compounds. Streamflow during the study was dominated by winter stormflows, followed by a gradual recession of flow into summer 1997, as water that had been stored in alluvial fans drained to lowland ditches. Outflow at the ditch terminus in 1997 was 125 million gallons greater than measured inflow to the coastal plain, mainly reflecting gains from ground water along the ditches between outlying gages and the ditch terminus. Of the measured 1997 outflow, 98 percent was through the Kii outlet pump, with the outlet culvert valve only opening for brief periods during storms. Large volumes of stormflow overflowed the flood-relief swales unmeasured. The largest storm of the study, in November 1996, was estimated to have a flood frequency of about 3 to 4 years. Streamflow exceeded culvert capacity and overtopped Kamehameha Highway at Kalaeokahipa Stream and Hospital ditch. Slight overbank flooding in Kii ditch resulted strictly from high discharge. Minor overbank flooding farther out on the coastal plain probably was caused mainly by the small hydraulic gradients available to convey stormflows along the lowland ditches. Stormwaters flooded Kii ponds and flowed back upstream along Punamano ditch into Punamano marsh, introducing suspended sediment and possibly other contaminants to the Refuge. Two smaller storms in January 1997 resulted in smaller flows and no overbank flooding. The Kii outlet pump ran continuously for 7 days during the November 1996 storm and for 1 to 2 days during the January 1997 storms. During all three storms, the outlet culvert valve opened and the inner ditches overtopped the flood-relief swales, allowing free outflow of water from the inner ditch. Backwater effects hindered drainage during the January 1997 storms at Hospital ditch at Kamehameha Highway, and at Punamano ditch at Nudist Camp Road (where the backflow into Punamano marsh in November 1996 constituted an extreme backwater effect). A probable marine backwater effect was imposed at the ocean outlet ditch during the November 1996 storm through a combination of high spring tides and wave setup from large surf. Whether this backwater effect propagated upstream in the ditches to affect inland sites could not be determined conclusively. A sand plug may have built up in the ocean outlet channel before the November 1996 storm, but if so, it probably washed out prior to, or early in the storm, and was not present at the time of peak stage at inland sites. A season-long buildup of the sand plug in late 1997 was inferred from rising water levels in the outlet ditch. Seawater flows up the outlet channel or over the sand berm and into the outer ditch system on most high tides, and particularly during spring high tides. Ponds and ditches of the Refuge and surrounding lowlands have mud- and clay-lined bottoms that form an effective confining unit and inhibit interaction with an underlying shallow limestone aquifer. At Kii Unit, pond levels are higher than adjacent ditch levels and underlying ground-water levels, establishing lateral and downward head gradients that could foster seepage losses from the ponds. Regional ground-water discharge from the Koolau aquifer to the coastal-plain sediments is mostly diffuse, but is concentrated where ridges of Koolau Basalt plunge beneath coastal-plain sediments near Punamano Unit and at the head of Hospital ditch. Kii ditch gains brackish ground water downstream of Kamehameha Highway. Wastewater disposal from the sewage treatment plant adjoining Kii Unit poses little or no threat to Refuge habitat. Disposal is at six injection wells located 0.45 mi away at Kahuku, and the wells inject into confined limestone aquifers that do not extend to Kii Unit. The natural freshwater supply to Punamano Unit is adequate for maintaining the wildlife habitat, judging from stable pond levels and low salinities there. A monthly water budget for Punamano showed an apparent annual deficit in measurable flows in 1997, requiring unmeasured ground-water gains equalling 51 inches of water. The freshwater supply to Kii Unit is inadequate according to Refuge managers, because there is not enough water to manipulate levels adequately in the ponds during most of the year, and particularly during the driest months. This is confirmed by monthly deficits in the water budget for the Kii ponds during summer months. However, the Kii budget showed an annual surplus in measurable flows for 1997 equalling 24 inches of water. Unmeasured losses are required to explain the apparent annual surplus, such as discharge to the ditches through pond water-control structures and downward and/or lateral ground-water seepage. The apparent surplus at Kii is strictly hydrologic and is not a surplus in a management sense; it cannot be stored or used to supply the Refuge, but instead reflects losses from the system that render this amount of water unavailable for use. The budget year, 1997, was drier than normal (24 percent below long-term mean rainfall) and so the measured potential evaporation for 1997 was probably higher than the long-term mean. Few metals or organic compounds of potential concern were detected in pond and ditch waters and in pond-bottom sediments. Detected pesticides were at trace levels or just above minimum reporting limits. Exceptions that exceeded quality guidelines for freshwater sediment were copper and zinc in sediment from Kii ponds C and D, and copper in sediment from Punamano north pond. Therefore, urban and agricultural runoff probably have contributed little in the way of harmful metals or organic compounds to the Refuge, although the potential for such contribution remains from periodic flooding of the ponds by ditch stormflows. Salinity was low throughout most Refuge waters, qualifying as fresh to slightly brackish and suitable for the environmental needs of Refuge fauna. Higher salinities have been observed in ditches during past periods of sugarcane cultivation and saltwater aquaculture, however. Resumption of saltwater aquaculture could raise ditch salinities if saltwater effluents are disposed directly into the ditches, as they were in the past.

Hawaii

Uncertainty in ground-motion-to-intensity conversions significantly affects earthquake early warning alert regions

We examine how the choice of ground‐motion‐to‐intensity conversion equations (GMICEs) in earthquake early warning (EEW) systems affects resulting alert regions. We find that existing GMICEs can underestimate observed shaking at short rupture distances or overestimate the extent of low‐intensity shaking. Updated GMICEs that remove these biases would improve the accuracy of alert regions for the ShakeAlert EEW system for the West Coast of the United States. ShakeAlert uses ground‐motion prediction equations (GMPEs), which calculate spatial distributions of peak ground acceleration (PGA) and peak ground velocity (PGV) from earthquake source estimates, combined with GMICEs to translate GMPE output into modified Mercalli intensity (MMI). We find significant epistemic uncertainty in alert distances; near‐source MMI estimates from different GMICEs can differ by over 1 MMI unit, and MMI extents used for public EEW alerts can differ by hundreds of kilometers for larger magnitude earthquakes ( M ∼6.5+). We use a catalog of “Did You Feel It?” shaking reports to evaluate how well GMICEs predict observed shaking. Our preferred GMICE is the one that computes MMI using PGV for high intensities and transitions to using PGA for nondamaging intensities. These results motivate updating GMICE relationships more generally, including in ShakeMap applications.

The Seismic Record

Perspectives on transportable array Alaska background noise levels

Background seismic noise fundamentally sets a lower bound on our ability to record signals arising from earthquakes. The background noise spectrum at a station is a combination of cultural noise, ocean-generated microseism noise, intrinsic instrument self-noise, and the sensitivity of the instrument to nonseismic noise sources. The USArray-Transportable Array Alaska deployed 195 stations across Alaska and parts of Canada (Yukon, British Columbia, and Northwest Territories). These stations were all installed using similar techniques and made use of instruments with similar self-noise levels. As such, this network provides an opportunity to look at how geographic location influences seismic background. Using these broadband stations, we report background noise levels from 0.2 to 75 s period in six discrete bands. By constructing “noise maps,” we depict both spatial and temporal changes in the background noise field. Using these maps, combined with targeted analysis, we infer sources and contributing factors to noise levels in these different period bands. These include cultural noise, the formation of sea ice, seasonal changes in permafrost and wave activity in the Gulf of Alaska, and magnetic field variability. We use this study as an opportunity to review several previous studies examining seismic noise in Arctic regions.

Book chapter

Solution-collapse breccia pipe uranium deposits of the southern Colorado Plateau, northwestern Arizona, USA

Some of the highest-grade uranium deposits in the United States occur in breccia pipes that formed by solution and collapse of sedimentary strata, which occur in the southern portion of the Colorado Plateau in northwestern Arizona. The host breccia pipes are up to 1200 m in vertical extent, average about 90 m in diameter, and can cross-cut strata from their base in the Mississippian Redwall Limestone to as stratigraphically high on some plateaus as the Triassic Chinle Formation. These uranium-base metal deposits are up to 600 m thick and formed within the breccia pipes where they transect the Permian Coconino Sandstone, Hermit Formation, and the Esplanade Sandstone. Of the hundreds of breccia pipes identified across this region, only a small percentage are known to contain mineralization. The main uranium ore mineral is uraninite that is intergrown with at least 20 base-metal sulfide minerals, which contribute Fe, Cu, Co, As, Pb, Zn, Ni, and Ag to the deposits. This study considered regional stratigraphy, sulfur isotope systematics, mineralogy, in situ dating, and compilation and analysis of previous work on the deposits. A comprehensive deposit model has not been published for these deposits. This analysis identified new additions to update the deposit model for these unusual, possibly unique deposits. Proposed modifications to the model include: (1) the source, mechanisms, timing of the base-metal sulfide mineral assemblages, and (2) the source, mechanism, and timing of the uranium mineralization. Sulfide and uranium deposition are shown to be separate mineralization events. The study proposes the possible role of gypsum as a source of sulfur for the sulfide minerals in the deposits. Groundwaters carrying uranium encountered the preexisting sulfides in breccia pipes, reducing the uranyl ions, and precipitating U oxide (as uraninite). Analysis of the regional stratigraphy recognized that numerous beds of gypsum are in the strata that lie only tens of meters above the breccia pipe deposits. In the breccia pipe region, if these stratigraphic units (Toroweap and Kaibab Formations) do not contain gypsum layers then the underlying pipes are not mineralized; where these Permian gypsum layers do occur, breccia pipes can host mineralization. This new understanding should be useful in identifying the prospective region for mineralized pipes.

Arizona

The geology of Canadian potash: A critical mineral for feeding the world

Potash, potassium-bearing water-soluble salt, is the primary global economic source of potassium. Potash is recognized as a critical mineral in Canada as it is the largest source of potassium used in fertilizers. It is essential for global agricultural productivity and food security. Canada is the world’s largest potash exporter with vast deposits in the widely mined Prairie Evaporite of Saskatchewan, which formed in the epicontinental Elk Point Basin during the Middle Devonian. Potash is also found in the Windsor Group of Atlantic Canada where it formed in a series of tectonically active basins during the Mississippian that have undergone substantial post-depositional subsurface alteration and deformation. Potash deposits were mined in New Brunswick up until 2016. Both deposits are salt giants, recording times in the geologic record of extensive and long-lasting evaporite genesis under arid conditions in restricted seas. This paper reviews the geological and economic significance of Canadian potash, including (1) the genesis of each deposit, (2) diagenetic, erosional, and tectonic modification, and (3) exploration and mining in each basin. Underdeveloped regions, possible undiscovered resources, environmental considerations, and the importance of sustainable practices in light of climate change and socioeconomic risks are also addressed.

Facets

Enhancing mineral systems exploration through geochronology, thermochronology, and isotope analysis: USGS Geochron and USGS Isotope databases

A mineral systems approach to mineral exploration provides a comprehensive framework for understanding ore deposit formation by examining the geodynamic, magmatic, hydrothermal, and sedimentary processes responsible for mineralization, alteration, and remobilization of economic mineral deposits. Temporal and thermal constraints on ore genesis are crucial for refining mineral system models and guiding predictive exploration strategies. Geochronology and thermochronology offer invaluable insights into the timing and thermal evolution of ore-forming processes, whereas isotopic analyses provide critical information on the source and geochemical history of ore-forming fluids. Combining these methodologies have proven highly effective for mineral exploration in regions like Australia, however, their combined application has been limited in the United States. To apply these tools to mineral systems-based exploration, the U.S. Geological Survey (USGS) has developed two products: (1) The USGS Geochron Database, and (2) the USGS Isotope Database. These databases provide centralized repositories of geo/thermochronological dates and data (Geochron Database) and both radiogenic and stable isotope data (Isotope Database) generated by the USGS and partners over the past decades. Integrating these datasets together and with traditional exploration approaches provides the mineral exploration community with powerful tools for determining the temporal and thermal histories of ore systems and identifying metallogenic source provinces.

Continental United States

Water use across the conterminous United States, water years 2010–20

Withdrawals of water for human use are fundamental to the evaluation of the Nation’s water availability. This chapter provides an analysis of public supply, crop irrigation, and thermoelectric power water use for the conterminous United States (CONUS) during water years 2010–20. These three categories account for about 90 percent of water withdrawals in the Nation. The values presented here are based on modeling approaches that estimate water use at temporal (monthly) and spatial scales (12-digit hydrologic unit code—small watersheds sized 50–100 square kilometers) compatible for integration into a broader national assessment of water availability. Models also provide an understanding of factors that influence water use. An estimated 244,817 million gallons per day (Mgal/d; 28,677 million cubic meters per month [Mm 3 /mo]) were withdrawn on average within the CONUS during water years 2010–20 from fresh water and saline water for crop irrigation, public supply, and thermoelectric power, with shares of 43, 14.5, and 42.5 percent for each of these categories, respectively. In the same period, estimated withdrawals and consumptive use (1) for public supply were 35,400 and 4,219 Mgal/d (4,081 and 486 Mm 3 /mo), respectively; (2) for crop irrigation were 105,497 and 75,698 Mgal/d (12,147 and 8,716 Mm 3 /mo), respectively; and (3) for thermoelectric power from fresh water were 82,656 and 2,904 Mgal/d (9,952 and 345 Mm 3 /mo), respectively. Withdrawals for these categories of water use are highly spatially variable, with western States dominated by crop irrigation and eastern States dominated by thermoelectric-power water use. Public supply accounts for the largest percentage of water use in several heavily populated northeastern States. Reliance on groundwater compared to surface water depends on the availability of water sources and the type of water use. For public supply, withdrawals from groundwater are greater than withdrawals from surface water in the Western aggregated hydrologic regions, whereas the balance shifts to more surface water for the rest of the CONUS. In all aggregated hydrologic regions, the predominant source of water for crop irrigation is groundwater. Most thermoelectric power facilities in the eastern half of the CONUS use surface water from freshwater and saline sources; most thermoelectric power facilities in the western half of the CONUS use groundwater.

conterminous United States

Inset groundwater-flow models for the Cache and Grand Prairie Critical Groundwater Areas, northeastern Arkansas

The water resources in the Mississippi alluvial plain, located in parts of Missouri, Kentucky, Tennessee, Mississippi, Louisiana, and Arkansas, supports a multibillion-dollar agricultural industry that relies heavily on pumping of groundwater for irrigation of crops and aquaculture. The primary source of groundwater for agricultural-related pumping is the Mississippi River Valley alluvial aquifer, which has declined in storage for decades; secondary groundwater sources include the middle Claiborne aquifer and Wilcox aquifer system. Two areas in northeastern Arkansas that lie within the Mississippi alluvial plain, part of the Cache and Grand Prairie regions, have been designated as Critical Groundwater Areas owing to decades of groundwater declines that resulted from past and current water use. The multidisciplinary Mississippi Alluvial Plain project, led by the U.S. Geological Survey, and funded by their Water Availability and Use Science Program, included objectives to develop numerical groundwater models in focus regions, including the part of the Cache and Grand Prairie regions of northeastern Arkansas. Two inset models were developed using the child model capabilities of MODFLOW 6, the U.S. Geological Survey’s Modular Hydrologic Model simulation software. Both models, called the Cache model and Grand Prairie model, simulated the groundwater system and surface-water/groundwater interactions for the Mississippi River Valley alluvial aquifer and underlying Tertiary-age aquifers and confining units to the Midway confining unit. Each model was spatially discretized into 500-meter x 500-meter orthogonal cells on a grid with 5-meter constant-thickness vertical layers that represented the Mississippi River Valley alluvial aquifer and increasing thickness layers for the aquifers and confining units below the alluvial aquifer. The Cache and Grand Prairie models were calibrated with the PEST++ iterative ensemble smoother Version 5 and employed high dimensional parameterization schemes of 13,740 and 30,436 parameters, respectively. The Cache mean absolute residual for groundwater-level observations within each model domain for the priority well was 1.58 meters. Grand Prairie mean absolute residuals for the alluvial aquifer and middle Claiborne aquifer groundwater-level observations were 2.71 and 10.78 meters, respectively. The groundwater budgets for the Cache and Grand Prairie models were characterized by substantial outflows to irrigation wells, which constituted about 52 and 54 percent of all outflows, with the primary source of water to those wells being releases from unconfined aquifer storage.

Arkansas

Prospectivity mapping for geologic hydrogen

Geologic, or naturally occurring, hydrogen has the potential to become a new, low-carbon, primary energy resource. Often referred to as “white” or “gold” hydrogen, this gas occurs naturally in the Earth’s subsurface, similar to petroleum resources. However, unlike petroleum, which releases carbon dioxide when burned, burning hydrogen only produces water as a byproduct. Exploration for geologic hydrogen remains in an early stage and discoveries of high concentrations of subsurface hydrogen are still relatively rare. To facilitate research and exploration for this potential resource, this report presents the first publicly available prospectivity map of geologic hydrogen accumulations in the conterminous United States. Prospective regions are those regions in which all major components necessary for a hydrogen accumulation likely are present—a source of sufficient hydrogen generation, porous reservoirs for storage, and seals to prevent leakage. The midcontinent region of the United States and the central California coast are revealed as having high prospectivity. This analysis also identifies previously unrecognized prospective regions that may be favorable due to long distance lateral migration of subsurface hydrogen, such as the offshore eastern seaboard of the United States, and can provide a linkage between surface observations of hydrogen degassing and far-field source regions. The methodology developed to create this map is expandable and flexible and may be adapted to incorporate new concepts in the hydrogen system and for application to other regions of the world.

conterminous United States