USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Hazardous Materials”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,660 records · Page 26Linked to original sources
USGS2025

High frequency and region-scale simulations of large (Mw7+) earthquakes on the southern Whidbey Island fault, Washington, USA

We simulate ground shaking in western Washington State from hypothetical M w 7.0–7.5 earthquakes on the southern Whidbey Island fault (SWIF). Ground motions are modeled considering kinematic source distributions on a complex fault plane, a 3D seismic velocity model, and region‐specific soil velocity models. We run simulations with varying model resolutions, including regional‐scale simulations with a maximum‐modeled frequency of ∼1 Hz and local‐scale simulations with a maximum‐modeled frequency of ∼2.5 Hz. Additional local‐scale simulations are run considering high‐resolution surface topography. We explore how source parameters (i.e., magnitude, hypocenter location, and dip direction) and 3D velocity structure impact peak shaking intensity and its variability. In particular, we find that earthquakes on the SWIF would likely produce strong shaking throughout the populated Puget Lowland, including in the cities of Everett, Seattle, Bellevue, and Tacoma, Washington. Simulated short‐period ( T ≤ 2 s) spectral accelerations are strong throughout the Puget Lowland, and long‐period shaking ( T ≥ 5 s) is strong in the deep regional sedimentary basins, especially the Everett and Seattle basins. Source parameters strongly influence intra‐ and interevent variability in response, primarily through changes in source and site geometry, as well as rupture directivity. We also note a potential coupling between rupture directivity and basin effects, wherein directivity pulses are seemingly guided through the region’s deep, interconnected sedimentary basins. Overall, this work highlights the impacts of 3D source, path, and site effects on seismic hazard in the U.S. Pacific Northwest and substantially expands the catalog of simulated ground motions for Puget Sound area crustal faults.

Washington↗
USGS2026

Cajon Pass and the southern San Andreas Fault System: Earthquake cycle stress accumulation and present-day loading

With over a century since the last major rupture affecting the wider Los Angeles region, tectonic stress has steadily built along the southern San Andreas and San Jacinto fault systems, raising concerns of an imminent large earthquake. Cajon Pass, located at the junction of these faults, represents a critical site for potential through-going ruptures in Southern California. We constructed new 4D earthquake cycle simulations using a 1000-year paleoseismic rupture history of the San Andreas Fault System (SAFS) to assess spatial and temporal variations in stress. A semi-analytic Fourier transform model was used to compute stress from 3D dislocations in an elastic plate overlying a Maxwell viscoelastic half-space, assuming a complete coseismic reset of resolved shear stress on ruptured elements. Results show highest stress accumulation north of Cajon Pass (∼1.8 MPa/100 years) due to greater slip rates, and lower rates south of Cajon Pass (∼1.0–1.5 MPa/100 years). By 2025, Coulomb stress is estimated at 2.8 MPa on the Mojave South (MOS) segment, 1.8 MPa on the North San Bernardino (NSB1) segment and 3.6 MPa on the San Jacinto Bernardino (SJB) segment. Segments accumulate stresses with characteristic ranges of pre-event stress interpreted as failure thresholds: 1.2–2.7 MPa for MOS, 0.4–1.6 MPa for NSB1, and 1.2–2.9 MPa for SJB. When the stress disparity between segments SJB and MOS narrows, the faults appear to rupture jointly, suggesting that stress levels may control how Cajon Pass acts as an earthquake gate. These results may inform seismic hazard assessments by linking stress evolution to fault interactions.

California↗
USGS2025

Reflections on a trio of North American earthquakes in 1925

In 1925, three moderately large damaging earthquakes occurred in North America over four months: the 28 February (local time; LT) M 6.2 Charlevoix, 27 June (LT) M 6.6 Montana, and 29 June M 6.5 Santa Barbara earthquakes. The centennial anniversaries of these events motivated this retrospective consideration focused on the ground motions generated by the three events, including a reconsideration of early intensity assignments for the Montana earthquake. At the time, these three earthquakes appeared to support the arguments of some geologists who downplayed the severity of seismic hazard in southern California relative to other parts of the country. Some of the arguments advanced at that time, for example that Los Angeles “has the least to fear from ‘Acts of God’ of any city under the American flag,” ( Hill, 1928 ) sound naïve if not laughable now, but a comparison of well‐constrained shaking distributions for the three earthquakes reveals the dramatic difference in wave propagation efficiency in western versus eastern North America (ENAM), which leads to moderate ENAM events being felt to much larger distances. At M 6.2, the 1925 Charlevoix earthquake was a notably large event in ENAM. This earthquake was the largest event in eastern Canada since 1870 and caused damage in the epicentral region in addition to towns as far away as 200 km, with felt shaking extending over 1000 km. In contrast, felt shaking from the Santa Barbara earthquake barely extended beyond ∼200 km. Compiling published intensity distributions for larger ENAM earthquakes, we show that perceptible earthquake shaking is not uncommon in ENAM over century time scales, but experience with weakly felt shaking may incline people to downplay potential earthquake risk.

California, Montana, Quebec↗
USGS2026

Numerical modeling of Late Pleistocene to Holocene earthquake-induced progressive rock slope damage in the paraglacial Serpentine valley, Prince William Sound, Alaska

Landslides in deglaciating fjords pose a potential tsunami threat to nearby communities; however, processes contributing to long-term progressive rock damage and landslide conditioning remain poorly constrained in paraglacial settings. Here, we analyse the role of earthquake-induced rock mass damage over late Pleistocene to Holocene time scales, as a conditioning factor for modern landslides, using distinct element numerical modelling to assess spatial and temporal patterns of fracture propagation influenced by varying glacier thickness. Conceptualised numerical models were parameterised by in situ rock mass, glacial and topographic conditions in Serpentine valley, located in Prince William Sound, Alaska, where several large landslides are actively developing along the western valley wall. Results show that although rigid glacier buttressing reduces co-seismic rock mass damage, it does not suppress it completely, and damage occurs both above and below the glacier surface elevation. We demonstrate that topography, and especially steep slopes with topographic convexity, as well as preexisting damage of joint networks and faults inherited from tectonic and exhumation induced stresses, exert primary control on the location of new co-seismic damage. Simulations representing a simplified deglaciation sequence over the past 25 ka, with a series of 10 evenly spaced earthquakes, generated rock mass damage patterns that qualitatively match in situ landslide structural and kinematic observations at one instability in Serpentine valley. Our conceptual study helps clarify the role of repeated seismicity over glacial timescales as a long-term conditioning process for paraglacial rock slope failure, highlighting spatial and temporal patterns of progressive damage accumulation, with outcomes relevant for modern landslide hazard assessment.

Alaska↗
USGS2026

Wavelet Inversion for SliP (WISP): Open-source earthquake slip modeling software

Models of the spatiotemporal evolution of earthquake slip, termed finite-fault models, are a critical component of rapid earthquake and tsunami response, earthquake forecasting, seismic ground-motion estimates, and studies of earthquake kinematics. Here, we detail a newly released finite-fault modeling software, Wavelet Inversion for SliP (WISP), in use at the U.S. Geological Survey’s National Earthquake Information Center (NEIC) and available to the public. WISP version 1.1.0 allows inversion of teleseismic body and surface waves, as well as local strong-motion, static and dynamic Global Navigation Satellite System, and satellite imagery (e.g., Interferometric Synthetic Aperture Radar) observations on single or multiple planar fault segments. The software is used in NEIC rapid response of earthquakes M w ≥ 7, generally resulting in a published model within the first few hours after the event origin time. The rupture location and dimensions are then used as inputs to downstream products to estimate earthquake shaking, predict loss, and model the likelihood of secondary hazards, namely landslides and liquefaction. WISP is also used in research studies to evaluate the characteristics of complex ruptures including multifault ruptures and earthquake doublets, among others. The WISP version 1.1.0 software release is composed of Python-wrapped FORTRAN code to accomplish the inversion procedure. A simple command line interface facilitates ease of use even for those with only a cursory knowledge of Python scripting. WISP version 1.1.0 includes a Jupyter Notebook tutorial demonstrating use of the software for modeling the 2015 M w 8.3 Illapel, Chile, earthquake. In parallel with the tutorial, we demonstrate the typical usage of the WISP software using the M w 8.3 Illapel earthquake example here.

Seismological Research Letters↗
USGS2025

Relationship between peak and cumulative ground motions from 49 Mw 3-6 earthquakes in the San Francisco Bay Area

We examine the relationship between peak ground velocity (PGV) and cumulative absolute displacement (CAD) for 49 M w 3 – 6 earthquakes in the San Francisco Bay Area (SFBA) and gain insight into the spatiotemporal partitioning of seismic energy in ground motion records with respect to source, path, and site effects. PGV and CAD are positively correlated, but there can be large deviations from the average trend. For example, ground motion records with either very long duration resonance or short pulse-like motions will have higher or lower CAD, respectively, but could have very similar PGV. We perform principal component analysis (PCA) on PGV-CAD for >7000 records in the SFBA with the goal of investigating what influences positive or negative anomalies in cumulative motions. PCA rotates the PGV-CAD datapoints into two principal components, where the one with the larger variance, which we call the “primary intensity” represents mostly the distance-dependence of ground motion amplitudes. The other principal component, which we call the “excess motion”, represents the deviation from cumulative motions that would be typical for a ground motion record with a given PGV. The excess motion will be positive in the case of records with long duration ringing and will be negative for short duration pulse-like ground motions. We find that excess motion is generally positive at sites in sedimentary basins and in soft sediments around the SF Bay. Excess motion is generally negative in the very near field, as well as at sites on hard bedrock. We discuss the findings here in terms of implications for seismic hazard applications and other wave propagation phenomena.

California↗
USGS2026

Timescales of cumulate mobilization and mixing for the 1868 A.D. eruption of Mauna Loa, Island of Hawai‘i

The deadly 1868 A.D. eruption of Mauna Loa’s lower Southwest Rift Zone (Island of Hawai‘i) included a M7.9 earthquake and associated tsunami and landslides, demonstrating the severe hazards posed by Earth’s largest active subaerial volcano. To better understand the relationship between intense seismic activity, dike emplacement, magma storage, transport histories, and mobilization of olivine cumulates at Mauna Loa, we examine compositional zoning of olivine in the 1868 lava flows. Samples range from basalt (< 10% olivine) to picrite (30–40% olivine). The olivine cargo is heterogeneous (Fo 78.2–89.2 ; forsterite = [Mg/(Mg + Fe) × 100]) but dominated by ~ Fo 89 cores that lie above the Fe-Mg equilibrium field of host glasses. Crystal rims < Fo 80 are due to post-eruptive modification in slow cooling lava flows. Minor element compositions fall within the range of other Mauna Loa olivine erupted in the past 200 years. Olivine crystals exhibit both normal and complex Fo zoning patterns that yield timescales of diffusive re-equilibration that range from 3 to 258 days, with 72% of crystals recording 71 days or less. These timescales correspond to magmatic priming of the summit reservoir system ~ 2 months prior to the eruption and the M7.9 earthquake likely facilitated the transport of the crystal-rich summit-derived magmas downrift shortly prior to eruption. If the recently proposed faster Fe-Mg diffusion coefficient is used, timescales instead range from < 1 day to 25 days, with most recording 1 week or less. In this scenario, most of the olivine zoning would have to have been generated after the M7.9 earthquake perturbed the system.

Hawaii↗
USGS2025

Emerging investigator series: Post-wildfire sediment geochemical characterization reveals manganese reactivity and a potential link to water quality impairment in the Gallinas Creek watershed, New Mexico

Water quality post-wildfire is often impaired by increased turbidity and elevated concentrations of elements such as manganese (Mn) and iron (Fe). Precipitation events exacerbate these issues, due in part to increased erosion and transport of sediment from hillslopes to surface water. Both Mn and Fe are major redox-active elements in sediments that drive a variety of biogeochemical cycles, precipitate adsorptive phases, and can themselves be drinking water contaminants. By investigating Mn and Fe sediment geochemistry in post-wildfire sediment deposits, related water quality hazards can be assessed. To establish and strengthen this connection, we analyzed the geochemistry of sediment deposits and surface water in the Gallinas Creek watershed, New Mexico over 1.5 years post-wildfire. Analyses included particle size analysis, water extractions, sequential extractions and aqua regia extractions to determine metal partitioning in sediment deposits. Data demonstrate Mn concentrations were distributed across labile and reactive fractions, such as the exchangeable and oxyhydroxide fractions, while Fe concentrations were mainly associated with the residual fraction. Manganese concentrations in aqua regia extractions and several fractions of sequential extractions were also strongly and significantly correlated with fine-grained sediment while the same pools of Fe concentrations were not. Dissolved Mn concentrations in surface water were elevated (>50 μg L −1 ) multiple times over the 1.5 years post-wildfire, highlighting a relationship between sediment geochemistry and water quality. This work shows Mn in sediments mobilized post-wildfire has an influence on water quality and highlights how further investigation into Mn sediment redox processes and mineralogy post-wildfire can inform risk assessments and resource management.

New Mexico↗
USGS2025

Nodal seismic deployment on Mauna Loa volcano, Hawaii: Dataset and preliminary insights

Mauna Loa is the largest active volcano on Earth, comprising ∼51% of the Island of Hawai‘i’s landmass and posing significant risks to the island’s communities, infrastructure, and natural environment. Historical eruptions have produced lava flows that have reached the ocean in as little as 3 hr. The timing and location of such lava flows in the past 200 yr underscore how critical determination of the location and geometry of magma storage and structure is for volcanic hazard assessment and eruption forecasting. Now, after nearly 38 yr of volcanic quiescence, Mauna Loa has erupted again. On 27 November 2022, fissures initiated within the summit caldera and then migrated to the northeast rift zone, where they generated a large lava flow that threatened a major highway. To improve our understanding of the geometry of this magma system, we deployed a temporary nodal array on Mauna Loa in the summer of 2024. This increased our seismic coverage sufficiently to image this magmatic system. This nodal array consists of 33 seismometers distributed on and around the volcano and was deployed for over three months to record seismic signals. The primary objective of this project is to resolve the high‐resolution seismic velocity structure and characterize seismic features associated with magma storage and ascent pathways. In this article, we present an overview of the deployment, evaluate the quality of the data, and show example recordings to evaluate the suitability of the data set for future seismic investigations, including earthquake relocation, seismic tomography, and receiver function analysis. Comparisons with nearby permanent broadband and short‐period seismic stations demonstrate that the nodal array recorded high‐quality waveforms, making it a valuable resource for constraining the magmatic system beneath Mauna Loa at multiple scales.

Hawaii↗
USGS2025

Do Graviquakes exist?

The “Graviquake” model, proposed in 2015 as an alternative to the elastic dislocation model, posits that normal faults are passive features dominated by coseismic gravitational collapse into a dilated crustal wedge, and that normal faulting is fundamentally distinct from strike‐slip and reverse faulting. Developed using finite‐element modeling before the 2016 central Apennines earthquake sequence, the model was revamped based on interpreted Differential Interferometric Synthetic Aperture Radar data from these events and used as evidence for a gravitational collapse episode. However, this interpretation relies on miscalculated elevation changes and is not corroborated by independent geophysical and seismological observations. Our analysis exposes fundamental flaws in the Graviquake model. By assuming that faults are passive players, it underrepresents the dynamic role of strain accumulation and release in rocks adjacent to faults. The hypothesized rapid expulsion of overpressurized fluids appears inconsistent with observed diffusion rates and lacks supporting seismological evidence. Part of the uplifted–subsided volume imbalance is likely an artifact arising from data processing, and in part is a transient effect due to the delayed response of the lower crust. Moment tensor analyses detect no isotropic components indicative of gravitational collapse, and observed ground motion and stress‐drop levels remain fully consistent with elastic dislocation theory. In addition, finite‐element modeling of normal faulting replicates observed surface deformation without invoking a collapsing wedge. The Graviquake model proposes a representation of normal‐faulting mechanics that differs significantly from established models and observations. Gravity does play a role in normal faulting, but the elastic dislocation theory remains the definitive framework of fault mechanics. Reinterpreting the 2016 earthquakes as a cascade of gravitational episodes, based on incorrect data processing and modeling, fails to substantiate the Graviquake hypothesis. Persistence in advocating this model could mislead seismic hazard assessment and undermine our understanding of normal faulting.

Bulletin of the Seismological Society of America↗
USGS2026

High-resolution magnetic survey using an unoccupied aerial vehicle to constrain buried lava flow geometry, volume, and eruptive history of Little Cones, Crater Flat, Nevada

Magnetic surveys are an important tool used to augment geologic mapping in distributed volcanic fields. Using magnetic anomalies, it is possible to model the geometry of shallowly buried volcanic features, such as conduits, sills, and lava flows. This subsurface mapping is important for understanding eruption dynamics and emplacement of lava flows, and it sometimes reveals buried volcanoes no longer visible at the surface. These data are critical to better interpret the numbers, styles, and magnitudes of eruptions in distributed volcanic fields and their associated volcanic hazards. New advances in unoccupied aerial vehicles (UAVs) offer an attractive middle range of resolution and aerial coverage between ground-based magnetic surveys and aeromagnetic surveys. Here, we present the results of a UAV fluxgate magnetic survey of the Little Cones, Nevada, scoria cones, which have been the target of previous ground and aeromagnetic surveys. The magnetic anomalies at Little Cones are of interest because the surrounding alluvium conceals lava flows that erupted from Little Cones, making it very difficult to understand the volume and morphology of lava flows from geologic mapping alone. Nonlinear inversion of UAV-collected magnetic data were used to model the thickness and morphology of buried Little Cones’ lava flows with higher precision than achieved previously. The sequence of events and calculated flow characteristics are then interpreted. The total volume of Little Cones, including concealed lava flows, is approximately 0.016 cubic kilometer, and the initial sheet flow erupted in less than 24 hours. The findings presented herein demonstrate that UAV-based magnetic surveys are a reliable method of data collection and an efficient alternative to other survey methods, facilitating development of a three-dimensional perspective of distributed volcanic fields.

Nevada↗
USGS2024

Debris avalanches in the northern California Coast Range triggered by plate boundary earthquakes

Determining the timing and cause for ancient hillslope failures proves difficult in the western United States, yet critical as it ties directly into groundmotion estimates for hazardous events. This knowledge gap is important to confront as hillslope failures are candidates to be triggered by earthquakes along active plate boundaries. We identify two prehistoric, i.e., preinstrumental history, debris avalanches (3 10^6 and 6 10^6 m^3) in the Coast Ranges of northern California. These debris avalanches are well suited for studying the timing (to the exact year) and trigger as the densely forested landscape enables effective use of dendrochronology and high-resolution radiocarbon to pinpoint time of failure, and the legacy of landslide studies in the region provides context for evaluating a seismic trigger as the most likely triggering mechanism. Neither debris avalanche was triggered by the largest precipitation event of the instrumental record in 1964 CE, and the two debris avalanche sites are physiographically suited to accommodate topographic amplification of seismic shaking. Through a suite of geologic and dendrochronologic evidence, we establish the likely time of failure of the two debris avalanches as 1906 CE and 933 CE. The failure of the younger landslide coincides with the 1906 CE San Francisco earthquake on the Pacific/North American plate boundary, while the older landslide dates to 933 CE falling within the broad age range (850-966 CE) of a likely megathrust earthquake on the Cascadia subduction zone as recorded in coastal marshes in Humboldt Bay, California. The precise age on the 933 CE debris avalanche could trim the uncertainty on a Cascadia subduction zone event from 116 years to one year. Utilizing debris avalanche records from sites suitable to record seismic shaking improves understanding of plate-boundary earthquake timing and extent of shaking.

Bulletin of the Seismological Society of America↗
USGS2026

Site response models based on geometric parameters for southern California sedimentary basins

Site response in sedimentary basins is influenced by complex three-dimensional (3D) features, including trapping of seismic waves, focusing of seismic energy and basin resonance. Current ground motion models (GMMs) incorporate basin effects using one-dimensional parameters like V S30 and shear wave velocity isosurface depths, which are limited in capturing lateral and 3D effects. To address these limitations, we develop seismic site response models based on novel parameters that represent multi-dimensional properties of the Los Angeles Basin (LAB) geometry and shear wave velocity. We define a basin shape for the LAB using depth to subsurface geologic interfaces associated with the oldest sedimentary deposits (depth to a particular shear wave velocity horizon, i.e., 1.5 km/s - z 1.5 ) and the depth to the crystalline basement ( z cb ) which are determined using geologic cross sections and community seismic velocity model profiles. We explore a suite of geometric descriptors computed for the LAB and southern California, from which three parameters with the greatest predictive potential are selected and evaluated using empirical ground motion residual analyses in combination with the Boore et al. GMM. The results demonstrate that the zonal heterogeneity index ( ), standard deviation of the absolute difference between z 1.5 and z cb ( ) and standard deviation of z cb ( ) each provide a reduction in site-to-site variability ( ϕ S2S ) of empirical GMMs. The reduction in ϕ S2S is period-dependent, with average decreases of 3%, 26% and 6% for , , and , respectively. Although these reductions are modest from an engineering application perspective, they are statistically significant, underscoring the inherent difficulty in fully characterising complex basin effects. Collectively, these findings indicate that the inclusion of basin-specific geometric parameters yields measurable, albeit incremental, improvements in site response prediction and establishes a framework for the progressive refinement of seismic hazard characterisation within sedimentary basins.

California↗
USGS2024

Slip rate for the Rose Canyon fault through San Diego, California, based on analysis of GPS data: Evidence for a potential Rose Canyon–San Miguel-Vallecitos fault connection?

The Rose Canyon fault is the southern extension of the larger Newport–Inglewood–Rose Canyon fault system, which represents a major structural boundary in the Inner Continental Borderland (ICB) offshore of southern California. Ten to fifteen percent of total plate boundary motion in southern California is thought to be accommodated by the faults of the ICB, but the exact distribution of slip is uncertain. With an onshore segment, the Rose Canyon fault offers an opportunity to measure the slip rate using traditional geodetic methods. In this study, we use Global Positioning System (GPS) surface velocities from a combined campaign and continuous GPS network to constrain elastic models of the Rose Canyon fault. We then compare the observed surface velocities with proposed conceptual models of regional fault connections that facilitate the transfer of slip into the Rose Canyon fault to assess how well the observations are explained by the models. The results of elastic half‐space models suggest that the Rose Canyon fault may be slipping toward the higher end of geologic estimates, with the preferred model indicating a slip rate of 2.4 ± 0.5 mm/yr. Although limited in terms of near‐fault benchmarks, we find an improved model fit using an asymmetrical elastic half‐space model and a higher slip rate, suggesting a potential rheological contrast across the Rose Canyon fault, similar to observations from the northern Newport–Inglewood fault segments. Observed GPS surface velocities, background seismicity, and gravity anomalies south of San Diego Bay point toward a more easterly trace for the Rose Canyon fault, suggesting a possible connection with the San Miguel–Vallecitos fault system. Such a connection could increase the potential rupture lengths of future earthquakes and have important consequences for regional seismic hazards.

California↗
USGS2026

Storage timescales and the crystal growth history recorded in the layered reservoir of the Unit 3 Kulanaokuaiki Tephra Member of the Uēkahuna Ash from Kīlauea volcano

The Kulanaokuaiki Tephra Unit 3 (900 C.E.) was a subplinian basaltic scoria eruption, the largest known to have occurred at Kīlauea’s summit. The initiation mechanism and cause(s) of this highly hazardous eruption remain poorly understood, particularly as this style of activity has not been observed in the modern period. We use olivine diffusion timescales from Fe-Mg and lithium zoning to assess magma storage timescales and evaluate evidence for mixing prior to eruption. Of the 200 crystals assessed, 55% are normally zoned for forsterite and 45% are non-zoned. Zoned crystals (> 1 mm) ( n = 96) have average compositions of Fo 89 cores and Fo 81 rims, while small crystals 0.5–1 mm ( n = 14) have Fo 85 cores and Fo 82 rims. Modeled Fo diffusion timescales range from < 1 to 12.6 years (median of 3.0 years). Lithium maps in 32 of the forsterite-zoned crystals reveal a variety of lithium zoning types, most of which we attribute to crystal growth. Many lithium profiles are coupled to phosphorus within the outer ~ 100 μm of the crystal ( n = 17), reflecting growth processes and precluding their use for diffusion studies. Overall, our Unit 3 olivine dataset displays no evidence of magmatic priming shortly prior to eruption, unlike prior observations for the basaltic subplinian eruption of the Keanakāko‘i Tephra Unit E (1650 C.E.). Thus, explosive eruption magmas may be stored for considerably longer than previously thought, and magmatic priming is not a necessary precursor for Kīlauea’s explosive eruptions. We hypothesize that gas-driven filter pressing from crystallization of microlites and macrocrysts in the reservoir slurry contributed to the explosivity of the Unit 3 eruption.

Hawaii↗
USGS2025

Phase 1 technical implementation plan for the expansion of the ShakeAlert earthquake early warning system to Alaska

Executive Summary The conference report accompanying the fiscal year (FY) 2022 Consolidated Appropriations Act (Public Law 117–103) for the U.S. Department of the Interior and related agencies directed the U.S. Geological Survey (USGS) to “work with the State of Alaska to develop an implementation plan to be completed within two years in order to put ShakeAlert/Earthquake Early Warning in Alaska” (p. 29). Congress included $1 million in the FY 2022 appropriation to conduct this effort. The USGS Earthquake Hazards Program, along with partner organizations, has developed the ShakeAlert earthquake early warning (EEW) system for the West Coast, which currently operates in California, Oregon, and Washington. The purpose of the system and its alert delivery partners is to reduce the impact of earthquakes and save lives and property by delivering ShakeAlert-powered alerts that are transmitted to the public via mass notification technologies, and by providing more detailed data streams to institutional users and commercial service providers to trigger automated, user-specific, protective actions. ShakeAlert was designed in such a way that it could be expanded to other U.S. regions with high earthquake risk, after the build-out of seismic and geodetic networks to support ShakeAlert in a specified region is completed and the necessary funding is secured for long-term operation and maintenance. When an earthquake occurs, seismic waves radiate from the rupturing fault like waves on a pond. It is these waves that people feel as earthquake shaking and that can cause damage to structures. Using networks of ground-motion sensors and sophisticated computer algorithms, ShakeAlert can detect an earthquake seconds after it begins, calculate its location and magnitude, and estimate the resulting intensity of shaking. Early warnings of impending shaking are then sent to people and systems that may experience damaging shaking, allowing them to take appropriate protective actions. Depending on the user’s distance from the earthquake, alerts may be delivered before, during, or after the arrival of strong shaking. There will almost always be a region near the earthquake epicenter where alerts arrive after damaging shaking has begun. The ShakeAlert system updates its ground-motion estimates as an earthquake grows larger. In response to the FY 2022 congressional direction, the USGS worked with the State of Alaska to devise this implementation plan for ShakeAlert expansion to Alaska. The USGS engaged with the Alaska Division of Homeland Security and Emergency Management (DHS&EM) and the Alaska Division of Geological and Geophysical Surveys (DGGS). A cooperative agreement was awarded to the Alaska Earthquake Center (AEC) at the University of Alaska Fairbanks (UAF) for their contributions to the plan and their work coordinating with other networks in Alaska. The USGS engaged with the Alaska Seismic Hazards Safety Commission (ASHSC) throughout the process. The USGS also held a series of Alaska stakeholder engagements. The process of developing the implementation plan was facilitated by contracted staff from Corner Alliance, which is a government consulting firm. This implementation plan describes the details and estimates the costs for a Phase 1 expansion of the ShakeAlert system to Alaska. A geographically limited Phase 1 goal was chosen that covers the highest risk and most populated areas of Alaska. The areas proposed encompass the State’s main population centers and 90 percent of the State’s population. This Phase 1 design is considered very challenging and ambitious from the viewpoint of network operators. The lessons learned if this plan is implemented could be used to consider subsequent phases to expand EEW beyond Phase 1 in Alaska in the future. ShakeAlert is built on the foundation of the sensor networks and data processing infrastructure of the USGS-led Advanced National Seismic System (ANSS). This implementation plan calls for a total of 450 high-quality, real-time EEW-capable ANSS seismic stations in Alaska: 270 new stations, 160 upgraded stations, and 20 existing stations. These seismic station numbers are based on a station spacing of 10 kilometers (km) in urban areas, 20 km in seismic source areas that endanger population centers, and 40 km in other areas. The associated costs also include support for some EEW-capable global navigation satellite system (GNSS) stations, with a focus on improving warnings for large subduction zone earthquakes. For effective EEW, ShakeAlert requires low-latency, high-availability, robust telemetry links to deliver continuous, real-time data from field stations to the data centers. The Alaska data processing hardware infrastructure would follow the general design for fail-safe operation that is used for the ShakeAlert system on the West Coast. The ShakeAlert architecture uses two independent layers: the production layer for earthquake processing and the alert layer to make alerting decisions and serve alerts to users. This implementation plan includes two geographically separated data centers in Alaska, each with two fully independent production and alert layers using the same system design developed for the West Coast. As of March 2024, the ShakeAlert system is at version 3.0.1, with more advanced versions in the development and testing pipeline. ShakeAlert originally used two algorithms to determine the location and magnitude of earthquakes using seismic data. A third algorithm that can calculate very large magnitudes of very large earthquakes with geodetic data was added in March 2024. ShakeAlert publishes several data and alert products to meet the needs of different users. All messages include the location of the earthquake, either as a point or a line, and its magnitude. Ground-shaking estimates are published in two forms, as ground-motion contours and a map grid. Providing adequate warning time for strong shaking (the “target threshold”) requires sending alerts at a threshold lower than that strong shaking level (the “alert threshold”). The thresholds for public alerting in Alaska would be a joint USGS and State decision. To have the greatest benefit, ShakeAlert-powered alerts would be delivered to institutional users and individuals by all practical pathways. The USGS alert layer can support thousands of institutional users and alert redistributors, but the USGS does not have the mission nor the infrastructure and expertise to perform mass notifications to the public or implement automatic actions for end users of the alerts. To meet this need, ShakeAlert recruits private sector “technology enablers” that have the necessary expertise to develop end-user implementations using EEW alerts with the goal of stimulating an EEW industry. Earthquake early warning alerts are useless if people do not know how to respond to them. Although the alert messages include instructions about what to do (drop, cover, and hold on), alerts are more effective if people have been trained in advance. Messages about ShakeAlert’s capabilities, limitations, and benefits could be integrated with existing earthquake education programs, including State-run programs. Therefore, ShakeAlert would coordinate with both public and private partners and stakeholders through various partnerships and agreements to accomplish consistent and ongoing public earthquake hazard education. The estimated capital cost of completing the computing infrastructure and sensor networks for the Phase 1 ShakeAlert expansion to Alaska is approximately $66 million in 2024 dollars. The annual operation and maintenance cost of the completed system is estimated to be $12 million per year in 2024 dollars when fully built out.

Alaska↗
USGS2026

Simulation-based scenario ShakeMaps for large magnitude (MW6.5+) crustal earthquakes on the Seattle, Tacoma, and southern Whidbey Island faults, Washington, USA

Scenario ground‐motion maps based on empirical ground‐motion models (GMMs) provide a rapid and generally reliable means of estimating the amplitude and distribution of earthquake shaking. However, because GMMs are designed for broad applicability, they often rely on simplified representations of Earth structure, which can limit their accuracy in regions with complex source, path, and site effects. This can substantially impact the accuracy of predicted shaking in areas like western Washington State, where deep, interconnected basin structure exerts a strong influence on seismic‐wave propagation. In this study, we present a new suite of simulation‐based scenario ShakeMaps that characterize ground shaking from large‐magnitude ( ⁠ M W 6.5–7.5) earthquakes on the Seattle, Tacoma, and southern Whidbey Island faults. These maps are developed using results from recent 3D wave propagation simulations ( Stone et al. , 2022 , 2023 , 2025 ) that incorporate realistic rupture geometries, variable slip distributions, and a regional 3D seismic velocity model with shallow soils. Broadband ground motions are estimated by combining the low‐frequency (<1 Hz) deterministic seismograms from these studies with high‐frequency (1–10 Hz) stochastic seismograms. Simulated ground motions are corrected to account for the enforced minimum shear‐wave velocity and nonlinear site response. The resulting ShakeMaps represent median ground‐shaking estimates derived from multiple rupture scenarios with varying slip distributions and hypocenter locations for each fault. To extend ShakeMap coverage beyond the simulation domain (i.e., into eastern Washington, northern Oregon, and southwestern British Columbia), we scale GMM‐based ground‐motion estimates using amplification patterns observed in the simulations. These new ShakeMaps reveal the substantial influence of deep basin structure on shaking intensity, underscoring the importance of considering crustal structure complexity in regional hazard assessments for the Pacific Northwest.

Washington↗
USGS2025

SURF: An automated method for building nonplanar 3D fault models from earthquake hypocenters

Accurately characterizing 3D fault geometry is vital for improving our understanding of earthquake behavior and informing the development of seismic hazard models. Despite their importance, subsurface fault structures tend to be poorly constrained because of limitations in observational data. Improvements to the seismic networks and earthquake detection algorithms have increased the precision and volume of earthquake catalogs, which help illuminate detailed subsurface fault structure and provide the most direct information available about fault geometries at depth. We present a Python package to automate generating 3D fault geometries directly from hypocentral seismicity patterns. This method begins with clustering events based on their spatial density, identifying coherent patterns. Nearby clusters are then merged based on the similarity of their orientations. We fit nonplanar surfaces using support vector regression to balance surface accuracy with minimal deviations from planarity. The fault models are output as quadrilateral meshes at user‐defined resolution. In the process of generating the 3D fault surfaces, we compute the spatial density of seismicity around the surface and the planarity as quantitative metrics of the model outputs. As a proof of concept, we apply this approach to the San Andreas–Calaveras fault junction region and the 2019 Ridgecrest earthquake sequence, both in California, which contain complex subparallel faults well defined at the Earth’s surface and abundant microseismicity. These case studies demonstrate the method’s ability to model complex fault structures, including long continuous fault surfaces, crossing faults, variably dipping segments, and subparallel faults. We test the method on both standard network catalogs and double‐difference relocated catalogs. We find that our seismicity‐based fault model results align with published 3D models that incorporate additional constraints and interpretations ( Plesch et al. , 2020 ; Aagaard and Hirakawa, 2021 ). This workflow provides a low‐user‐input solution for estimating fault geometries at depth from earthquake catalogs.

California↗