USGS Science⌕ Search

SEARCH · USGS Science

Results for “Holocene”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26Linked to original sources
USGS2004

Evidence for liquefaction identified in peeled slices of Holocene deposits along the Lower Columbia River, Washington

Peels made from 10 geoslices beneath a riverbank at Washington's Hunting Island, 45 km inland from the Pacific coast, aid in identifying sand that liquefied during prehistoric earthquakes of estimated magnitude 8-9 at the Cascadia subduction zone. Each slice was obtained by driving sheetpile and a shutter plate to depths of 6-8 m. The resulting sample, as long as 8 m, had a trapezoidal cross section 42-55 cm by 8 cm. The slicing created few artifacts other than bending and smearing at slice edges. Each slice is dominated by well-stratified sand and mud deposited by the tidal Columbia River. Nearly 90% of the sand is distinctly laminated. The sand contains mud beds as thick as 0.5 m and at least 20 m long, and it is capped by a mud bed that contains a buried soil that marks the 1700 Cascadia earthquake of estimated magnitude 9. Every slice intersected sills and dikes of fluidized sand, and many slices show folds and faults as well. Sills, which outnumber dikes, mostly follow and locally invade the undersides of mud beds. The mud beds probably impeded diffuse upward flow of water expelled from liquefied sand. Trapped beneath mud beds, this water flowed laterally, destroyed bedding by entraining (fluidizing) sand, and locally scoured the overlying mud. Horizontal zones of folded sand extend at least 10 or 20 m, and some contain low-angle faults. Many of the folds probably formed while sand was weakened by liquefaction. The low-angle faults may mark the soles of river-bottom slumps or lateral spreads. As many as four great Cascadia earthquakes in the past 2000 yr contributed to the intrusions, folds, and faults. This subsurface evidence for fluid escape and deformation casts doubt on maximum accelerations that were previously inferred from local absence of liquefaction features at the ground surface along the Columbia River. The geosliced evidence for liquefaction abounds not only beneath banks riddled with dikes but also beneath banks in which dikes are absent. Such dike-free banks of the Columbia River, if interpreted without study of postdepositional structures in deposits beneath them, provide insufficient basis for setting upper bounds on the strength of shaking from great Cascadia earthquakes.

Washington↗
USGS2005

Holocene and latest Pleistocene oblique dextral faulting on the southern Inyo Mountains fault, Owens Lake basin, California

The Inyo Mountains fault (IMF) is a more or less continuous range-front fault system, with discontinuous late Quaternary activity, at the western base of the Inyo Mountains in Owens Valley, California. The southern section of the IMF trends ???N20??-40?? W for at least 12 km at the base of and within the range front near Keeler in Owens Lake basin. The southern IMF cuts across a relict early Pliocene alluvial fan complex, which has formed shutter ridges and northeast-facing scarps, and which has dextrally offset, well-developed drainages indicating long-term activity. Numerous fault scarps along the mapped trace are northeast-facing, mountain-side down, and developed in both bedrock and younger alluvium, indicating latest Quaternary activity. Latest Quaternary multiple- and single-event scarps that cut alluvium range in height from 0.5 to 3.0 m. The penultimate event on the southern IMF is bracketed between 13,310 and 10,590 cal years B.P., based on radiocarbon dates from faulted alluvium and fissure-fill stratigraphy exposed in a natural wash cut. Evidence of the most recent event is found at many sites along the mapped fault, and, in particular, is seen in an ???0.5-m northeast-facing scarp and several right-stepping en echelon ???0.5-m-deep depressions that pond fine sediment on a younger than 13,310 cal years B.P. alluvial fan. A channel that crosses transverse to this scarp is dextrally offset 2.3 ?? 0.8 m, providing a poorly constrained oblique slip rate of 0.1-0. 3 m/ k.y. The identified tectonic geomorphology and sense of displacement demonstrate that the southern IMF accommodates predominately dextral slip and should be integrated into kinematic fault models of strain distribution in Owens Valley.

Bulletin of the Seismological Society of America↗
USGS2008

Holocene vertical displacement on the central segments of the Wasatch fault zone, Utah

Compiled per-event vertical-displacement observations from 17 paleoseismic sites along the six central segments of the Wasatch fault zone (WFZ) highlight possible biases and trends in displacement along the fault. The displacement data are consistent with a model of characteristic-type slip, but anomalous and variable displacements indicate that significant natural variability in displacement occurs. When combined into a composite distribution of displacement, 79% of the data fit within a displacement envelope that shows displacement decreasing in a half-ellipse shape from 1.4-3.5 m near the segment centers to 0.6-2.5 m near the ends. Additionally, displacements normalized by the distance from the segment centers to ends decrease from means of 2.0-3.0 m near the segment centers to 1.3-1.9 m near the ends, consistent with characteristic-type slip termination. Although several paleoseismic sites exhibit repeated, similar displacements, the data are sparse and both low-valued (0.5-0.8 m) and high-valued (4.2-4.7 m) outliers suggest complex strain release, possibly resulting from segment interaction and/or noncharacteristic events. Although a global, normal-fault-type surface-rupture-length (SRL) average-displacement regression underpredicts observed WFZ displacements, the largest displacements per segment correspond well with a SRL maximum-displacement regression. This correlation, as well as moderate variability in SRL- and displacement-based moment magnitude, suggests that the anomalous displacements represent the intrinsic variability in characteristic displacement per segment. Thus, minor variations to the characteristic slip model to account for exceptional upper- and lower-bound displacements, e.g., a hybrid characteristic-variable slip model, may be appropriate for the WFZ. Additional paleoseismic data are necessary to address data gaps and biases, to facilitate more robust tests of earthquake-slip models, and to reduce uncertainty in SRL, displacement, and magnitude.

Bulletin of the Seismological Society of America↗
USGS2014

Late Holocene slip rate and ages of prehistoric earthquakes along the Maacama Fault near Willits, Mendocino County, northern California

The Maacama fault is the northward continuation of the Hayward–Rodgers Creek fault system and creeps at a rate of 5.7±0.1 mm/yr (averaged over the last 20 years) in Willits, California. Our paleoseismic studies at Haehl Creek suggest that the Maacama fault has produced infrequent large earthquakes in addition to creep. Fault terminations observed in several excavations provide evidence that a prehistoric surface‐rupturing earthquake occurred between 1060 and 1180 calibrated years (cal) B.P. at the Haehl Creek site. A folding event, which we attribute to a more recent large earthquake, occurred between 790 and 1060 cal B.P. In the last 560–690 years, a buried channel deposit has been offset 4.6±0.2 m, giving an average slip rate of 6.4–8.6 mm/yr, which is higher than the creep rate over the last 20 years. The difference between this slip rate and the creep rate suggests that coseismic slip up to 1.7 m could have occurred after the formation of the channel deposit and could be due to a paleoearthquake known from paleoseismic studies in the Ukiah Valley, about 25 km to the southeast. Therefore, we infer that at least two, and possibly three, large earthquakes have occurred at the Haehl Creek site since 1180 cal B.P. (770 C.E.), consistent with earlier studies suggesting infrequent, large earthquakes on the Maacama fault. The short‐term geodetic slip rate across the Maacama fault zone is approximately twice the slip rate that we have documented at the Haehl Creek site, which is averaged over the last approximately 600 years. If the geodetic rate represents the long‐term slip accumulation across the fault zone, then we infer that, in the last ∼1200 years, additional earthquakes may have occurred either on the Haehl Creek segment of the Maacama fault or on other active faults within the Maacama fault zone at this latitude.

California↗
USGS2015

Paleoseismic evidence for late Holocene tectonic deformation along the Saddle mountain fault zone, Southeastern Olympic Peninsula, Washington

Trench and wetland coring studies show that northeast‐striking strands of the Saddle Mountain fault zone ruptured the ground about 1000 years ago, generating prominent scarps. Three conspicuous subparallel fault scarps can be traced for 15 km on Light Detection and Ranging (LiDAR) imagery, traversing the foothills of the southeast Olympic Mountains: the Saddle Mountain east fault, the Saddle Mountain west fault, and the newly identified Sund Creek fault. Uplift of the Saddle Mountain east fault scarp impounded stream flow, forming Price Lake and submerging an existing forest, thereby leaving drowned stumps still rooted in place. Stratigraphy mapped in two trenches, one across the Saddle Mountain east fault and the other across the Sund Creek fault, records one and two earthquakes, respectively, as faulting juxtaposed Miocene‐age bedrock against glacial and postglacial deposits. Although the stratigraphy demonstrates that reverse motion generated the scarps, slip indicators measured on fault surfaces suggest a component of left‐lateral slip. From trench exposures, we estimate the postglacial slip rate to be 0.2 mm/yr and between 0.7 and 3.2 mm/yr during the past 3000 years. Integrating radiocarbon data from this study with earlier Saddle Mountain fault studies into an OxCal Bayesian statistical chronology model constrains the most recent paleoearthquake age of rupture across all three Saddle Mountain faults to 1170–970 calibrated years (cal B.P.), which overlaps with the nearby M w 7.5 1050–1020 cal B.P. Seattle fault earthquake. An earlier earthquake recorded in the Sund Creek trench exposure, dates to around 3500 cal B.P. The geometry of the Saddle Mountain faults and their near‐synchronous rupture to nearby faults 1000 years ago suggest that the Saddle Mountain fault zone forms a western boundary fault along which the fore‐arc blocks migrate northward in response to margin‐parallel shortening across the Puget Lowland.

Bulletin of the Seismological Society of America↗
USGS2017

Recurrent Holocene movement on the Susitna Glacier Thrust Fault: The structure that initiated the Mw 7.9 Denali Fault earthquake, central Alaska

We conducted a trench investigation and analyzed pre‐ and postearthquake topography to determine the timing and size of prehistoric surface ruptures on the Susitna Glacier fault (SGF), the thrust fault that initiated the 2002 M w 7.9 Denali fault earthquake sequence in central Alaska. In two of our three hand‐excavated trenches, we found clear evidence for a single pre‐2002 earthquake (penultimate earthquake [PE]) and determined an age of 2210±420 cal. B.P. (2 σ ) for this event. We used structure‐from‐motion software to create a pre‐2002‐earthquake digital surface model (DSM) from 1:62,800‐scale aerial photography taken in 1980 and compared this DSM with postearthquake 5‐m/pixel Interferometric Synthetic Aperature Radar topography taken in 2010. Topographic profiles measured from the pre‐earthquake DSM show features that we interpret as fault and fold scarps. These landforms were about the same size as those formed in 2002, so we infer that the PE was similar in size to the initial ( M w 7.2) subevent of the 2002 sequence. A recurrence interval of 2270 yrs and dip slip of ∼4.8 m yield a single‐interval slip rate of ∼1.8 mm/yr. The lack of evidence for pre‐PE deformation indicates probable episodic (clustering) behavior on the SGF that may be related to strain migration among other similarly oriented thrust faults that together accommodate shortening south of the Denali fault. We suspect that slip‐partitioned thrust‐triggered earthquakes may be a common occurrence on the Denali fault system, but documenting the frequency of such events will be very difficult, given the lack of long‐term paleoseismic records, the number of potential thrust‐earthquake sources, and the pervasive glacial erosion in the region.

Alaska↗
USGS2020

Holocene paleoseismology of the Steamboat Mountain Site: Evidence for full‐Llngth rupture of the Teton Fault, Wyoming

The 72‐km‐long Teton fault in northwestern Wyoming is an ideal candidate for reconstructing the lateral extent of surface‐rupturing earthquakes and testing models of normal‐fault segmentation. To explore the history of earthquakes on the northern Teton fault, we hand‐excavated two trenches at the Steamboat Mountain site, where the east‐dipping Teton fault has vertically displaced west‐sloping alluvial‐fan surfaces. The trenches exposed glaciofluvial, alluvial‐fan, and scarp‐derived colluvial sediments and stratigraphic and structural evidence of two surface‐rupturing earthquakes (SM1 and SM2). A Bayesian geochronologic model for the site includes three optically stimulated luminescence ages ( ⁠ ∼ 12 – 17 ka ⁠ ) for the glaciofluvial units and 16 radiocarbon ages ( ⁠ ∼ 1.2 – 8.6 ka ⁠ ) for the alluvial‐fan and colluvial units and constrains SM1 and SM2 to 5.5 ± 0.2 ka , 1 σ (5.2–5.9 ka, 95%) and 9.7 ± 0.9 ka , 1 σ (8.5–11.5 ka, 95%), respectively. Structural, stratigraphic, and geomorphic relations yield vertical displacements for SM1 ( ⁠ 2.0 ± 0.6 m , 1 σ ⁠ ) and SM2 ( ⁠ 2.0 ± 1.0 m , 1 σ ⁠ ). The Steamboat Mountain paleoseismic chronology overlaps temporally with earthquakes interpreted from previous terrestrial and lacustrine paleoseismic data along the fault. Integrating these data, we infer that the youngest Teton fault rupture occurred at ∼ 5.3 ka ⁠ , generated 1.7 ± 1.0 m , 1 σ of vertical displacement along 51–70 km of the fault, and had a moment magnitude ( ⁠ M w ⁠ ) of ∼ 7.0 – 7.2 ⁠ . This rupture was apparently unimpeded by structural complexities along the Teton fault. The integrated chronology permits a previous full‐length rupture at ∼ 10 ka and possible partial ruptures of the fault at ∼ 8 – 9 ka ⁠ . To reconcile conflicting terrestrial and lacustrine paleoseismic data, we propose a hypothesis of alternating full‐ and partial‐length ruptures of the Teton fault, including M w ∼ 6.5 – 7.2 earthquakes every ∼ 1.2 ky ⁠ . Additional paleoseismic data for the northern and central sections of the fault would serve to test this bimodal rupture hypothesis.

Wyoming↗
USGS2001

Physiography and late Quaternary-Holocene processes of Northeastern Gulf of Mexico outer continental shelf off Mississippi and Alabama

High-resolution multibeam mapping of the mid- and outer continental shelf and upper slope off Mississippi and Alabama reveals a complex bathymetry that reflects conditions during the last eustatic rise and the present high stand of sea level. The most prominent bathymetric features are pinnacles and hardgrounds that are scattered throughout the area. These features generally stand <10 m above the surrounding seafloor, cover large areas, and display a variety of morphologies. Almost all the reef pinnacles and hardgrounds have zones of high acoustic backscatter on their summits and on the seafloor immediately adjacent to their southwest walls. In addition, they also have erosional moats on the seafloor to the southwest. Large fields of bedforms are scattered throughout the mapped area. The asymmetries and orientations of the bedforms suggest that they were formed by excursions of the northeast-flowing Loop Current. In contrast, the pervasive ponding of sediment on the northeast sides of bathymetric highs indicates that one of the predominant directions of sediment transport has been to the south and southwest. The shelf break is a zone of numerous landslides of various sizes and complexities. The morphology of several landslide scars indicates that some of the failures occurred recently. One large reef-capped salt dome was mapped in the area, surrounded by a large field of pock-marks. Fields of pockmarks are also scattered on the shelf. The growth and demise of the reefs are related to the fluctuating transgression of eustatic sea level during the last deglaciation. Two episodes of reef drowning are correlated with the increased rates of sea-level rise during documented melt-water pulses; the first occurred from 14.8 to 14.2 ka and the second from 11.8 to 11.2 ka. Rates of sea-level rise exceeded the maximum growth rate of hermatypic corals only during these two intervals since the last glacial maximum and thus drowned the coral communities.

Alabama, Mississippi↗
USGS2026

Apatite (U-Th)/He thermochronology from Marsh Creek anticline reconciles Cenozoic and Holocene strain patterns and elucidates the Cenozoic canning displacement zone of Arctic Alaska

The northeastern Brooks Range is a vast fold-thrust belt that records the northernmost expression of Cenozoic deformation in Alaska, likely with complex dynamic linkages to distant tectonic elements. The principal focus of this manuscript is the Marsh Creek anticline (MCA), which is a large and recently active structure within the broader northeastern Brooks Range. The MCA is a complex, polyphase structure mostly buried beneath the Arctic coastal plain. We present apatite (U-Th)/He (AHe) dates from six outcrop samples, all near the structural crest of the anticline, as well as supporting detrital zircon U/Pb (ZUPb) age spectra from five outcrop samples. The AHe sample transect spans ~3 km of structural relief. The four shallowest AHe samples are not reset. However, the two deepest samples exhibit low intrasample variability among replicates and strong date versus grain radius correlations, suggesting post-depositional burial heating to within the AHe partial retention zone. Inverse thermal history modeling of these data resolves a protracted phase of exhumational cooling that began around 33–28 Ma. Detrital ZUPb age spectra from Paleogene strata support an interpretation of diverse inherited thermal histories recorded by the AHe data, and they are also consistent with extant reconstructions of Paleogene sediment dispersal. Placed into regional context, the results constrain a phase of increasing structural relief in the northeastern Brooks Range fold-thrust belt that began by the Eocene. The relief developed in a zone characterized by diminishing structural relief to the west called the Canning displacement zone. Although this zone was active since the Eocene, several structures including the studied part of the MCA were rapidly exhumed in the Oligocene. Lastly, we argue for kinematic compatibility between Cenozoic contraction and active strike-slip in the northeastern Brooks Range, with the temporal change in strain style likely reflecting the increase in structural relief and topography.

Alaska↗
USGS2017

Earthquake-induced subsidence and burial of late holocene archaeological sites, northern Oregon coast

Fire hearths associated with prehistoric Native American occupation lie within the youngest buried lowland soil of the estuaries along the Salmon and Nehalem rivers on the northern Oregon coast. This buried soil is the result of sudden subsidence induced by a great earthquake about 300 years ago along the Cascadia subduction zone, which extends offshore along the North Pacific Coast from Vancouver Island to northern California. The earthquake 300 years ago was the latest in a series of subsidence events along the Cascadia subduction zone over the last several thousand years. Over the long term, subsidence and burial of prehistoric settlements as a result of Cascadia subduction zone earthquakes have almost certainly been an important factor contributing to the limited time depth of the archaeological record along this section of the North Pacific Coast. Copyright ?? by the Society for American Archaeology.

American Antiquity↗
USGS2009

Recognizing former flood-tide deltas in the Holocene stratigraphic record from the Outer Banks, North Carolina, USA

Foraminiferal and sedimentologic data were collected by vibracoring a small, relict, short-lived, migrating inlet (New Inlet) and its flood-tide delta on the Outer Banks, North Carolina. These data, placed in the context of geospatial data derived from ground penetrating radar, were developed into a stratigraphic model for this sedimentary environment. The model was applied to vibracores collected from two additional barrier island segments within which historic inlets had not been recorded to investigate whether inlets had existed in these segments in the past. Five foraminiferal biofacies were recognized within the three barrier island segments. Biofacies 1 through 5 are all associated with interior and back-barrier depositional environments but Biofacies 4 and 5 contained foram-inifera indicating a sediment source on the shoreface or shallow inner shelf. Biofacies 4 and 5 thus represent overwash or flood-tide delta depositional settings. Utilizing the model as an interpretive tool, we recognized a previously undocumented inlet and flood-tide delta that existed prior to 962-662 cal. yrs BP, a few kilometers north of Rodanthe, NC. However, at a barrier island segment between Avon and Buxton, NC., the lack of information on stratal geometry and foraminiferal assemblages meant that it could not be determined whether this sedimentary succession was influenced more by overwash or inlet dynamics. Given the similarity of foraminiferal assemblages in overwash and flood-tide delta sediments, it is clear that additional lines of evidence (lithologic and geospatial) are required to recognize small-scale flood-tide delta deposits in the subsurface.

Stratigraphy↗
USGS2000

Sedimentary record of the California Current system, middle Miocene to Holocene: A synthesis of Leg 167 results

During Ocean Drilling Program Leg 167, the California continental margin was drilled from about 30°N to 42°N to sample high-resolution paleoceanographic and paleoclimatic records in the California Current system. Because of typically high sedimentation rates along the margin (80 to >200 m/m.y.), drilling has proved necessary to collect late Pleistocene sedimentary records that usually are sampled by standard piston cores in other oceanic regions. Triple piston coring on Leg 167 enabled us to construct continuous submillennial paleoceanographic records to about 2 Ma. In the offshore drill sites, continuous records were constructed into the Miocene. The oldest sediments recovered on Leg 167 have an age of ~14 Ma. The California margin has an active diagenetic system driven by the degradation of organic matter. Leg 167 drilling provided a means to quantify the diagenetic processes within the deep sediment column and to study the links between sediment diagenesis and primary productivity. This synthesis chapter also documents the oceanographic variability along the California margin at all time scales, from 10 3 to 10 6 yr. Millennial-scale variability is found in Santa Barbara Basin (drilled during Leg 146) and in nearby basins drilled during Leg 167. Leg 167 cores also captured millennial-scale variability in the northern and central California margin. Orbitally forced insolation changes invoke a strong response throughout the California margin. Sea-surface temperature (SST) measured by the alkenone U k' 37 paleothermometer is highly coherent with the oxygen isotope record, being cold in glacials and much warmer in interglacials. Faunal and floral plankton assemblages vary strongly on the glacial-interglacial scale. Coastal plant communities show a glacial-interglacial variability that is most pronounced in the north, near the Cordilleran Ice Sheet. Major changes in the sediments prior to the Pleistocene mark major late Neogene oceanographic events. Opaline silica burial in the middle and upper Miocene sections have step-like drops from high opal deposition in the middle Miocene. One major drop occurs at ~11 Ma and is roughly correlative with the eastern equatorial Pacific Miocene carbonate crash. A second major drop occurs at about 8 Ma, equivalent in age to the end of the Monterey Formation. A third drop occurs slightly younger than the end of the Miocene. A lower Pliocene interval, roughly from 5 to 4.2 Ma, is low in all biogenic components. It separates the Miocene high-opal sediments from upper Pliocene high-carbonate sediments. High CaCO 3 deposition occurred all along the entire California margin in the late Pliocene, but CaCO 3 burial dropped abruptly with the beginning of Northern Hemisphere glaciation (2.6 Ma).

Baja California, California↗
USGS2008

Database for the Geologic Map of Upper Eocene to Holocene Volcanic and Related Rocks of the Cascade Range, Oregon

Since 1979, Earth scientists of the Geothermal Research Program of the U.S. Geological Survey have carried out multidisciplinary research in the Cascade Range. The goal of this research is to understand the geology, tectonics, and hydrology of the Cascades in order to characterize and quantify geothermal resource potential. A major goal of the program is compilation of a comprehensive geologic map of the entire Cascade Range that incorporates modern field studies and that has a unified and internally consistent explanation. This map is one of three in a series that shows Cascade Range geology by fitting published and unpublished mapping into a province-wide scheme of rock units distinguished by composition and age; map sheets of the Cascade Range in Washington (Smith, 1993) and California will complete the series. The complete series forms a guide to exploration and evaluation of the geothermal resources of the Cascade Range and will be useful for studies of volcano hazards, volcanology, and tectonics. This digital release contains all the information used to produce the geologic map published as U.S. Geological Survey Geologic Investigations Series I-2569 (Sherrod and Smith, 2000). The main component of this digital release is a geologic map database prepared using ArcInfo GIS. This release also contains files to view or print the geologic map and accompanying descriptive pamphlet from I-2569.

Data Series↗