SEARCH · USGS Science

Results for “Electronics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26Linked to original sources

USGS2021

A petrological and conceptual model of Mayon volcano (Philippines) as an example of an open-vent volcano

Mayon is a basaltic andesitic, open-vent volcano characterized by persistent passive degassing from the summit at 2463 m above sea level. Mid-size (<0.1 km3) and mildly explosive eruptions and occasional phreatic eruptions have occurred approximately every 10 years for over a hundred years. Mayon’s plumbing system structure, processes, and time scales driving its eruptions are still not well-known, despite being the most active volcano in the Philippines. We investigated the petrology and geochemistry of its crystal-rich lavas (~50 vol% phenocrysts) from nine historical eruptions between 1928 and 2009 and propose a conceptual model of the processes and magmatic architecture that led to the eruptions. The whole-rock geochemistry and mineral assemblage (plagioclase + orthopyroxene + clinopyroxene + Fe-Ti oxide ± olivine) of the lavas have remained remarkably homogenous (54 wt% SiO2,~4 wt% MgO) from 1928 to 2009. However, electron microscope images and microprobe analyses of the phenocrysts and the existence of three types of glomerocrysts testify to a range of magmatic processes, including long-term magma residence, magma mixing, crystallization, volatile fluxing, and degassing. Multiple mineral-melt geothermobarometers suggest a relatively thermally buffered system at 1050±25 °C, with several magma residence zones, ranging from close to the surface, through reservoirs at ~4–5 km, and as deep as ~ 20 km. Diffusion chronometry on >200 orthopyroxene crystals reveal magma mixing timescales that range from a few days to about 65 years, but the majority are shorter than the decadal inter-eruptive repose period. This implies that magma intrusion at Mayon has been nearly continuous over the studied time period, with limited crystal recycling from one eruption to the next. The variety of plagioclase textures and zoning patterns reflect fluxing of volatiles from depth to shallower melts through which they eventually reach the atmosphere through an open conduit. The crystal-rich nature of the erupted magmas may have developed during each inter-eruptive period. We propose that Mayon has behaved over almost 100 years as a steady state system, with limited variations in eruption frequency, degassing flux, magma composition, and crystal content that are mainly determined by the amount and composition of deep magma and volatile input in the system. We explore how Mayon volcano’s processes and working model can be related to other open-vent mafic and water-rich systems such as Etna, Stromboli, Villarrica, or Llaima. Finally, our understanding of open-vent, persistently active volcanoes is rooted in historical observations, but volcano behavior can evolve over longer time frames. We speculate that these volcanoes produce specific plagioclase textures that can be used to identify similar volcanic behavior in the geologic record.

Mayon volcano↗

USGS2021

Evolution in eruptive style of the 2018 eruption of Veniaminof volcano, Alaska, reflected in groundmass textures and remote sensing

Variable eruptive style and explosivity is common in basaltic to basaltic andesite volcanoes but can have uncertain origins. Veniaminof volcano in the Alaska-Aleutian arc is a frequently active open-vent center, regularly producing Strombolian eruptions and small lava flows from an intracaldera cone within an intracaldera ice cap. The September–December 2018 eruption of Veniaminof evolved in explosivity over time. The eruption was documented with frequent satellite observations, syn- and post-eruption structure-from-motion photo surveys, and post-eruption sampling of lava flows and tephra preserved in the syn-eruption snowpack. Lava flows with a total volume of ~ 6 × 10 6 m 3 flowed down the cone flanks into the ice cap, overthickening at ice marginal flow fronts. Smaller tephra deposits were estimated at ~ 1–2 × 10 6 m 3 dense rock equivalent, with almost half of this volume deposited directly on the eruptive cone itself. Erupted products were basaltic andesite, and composition (54 ± 0.7 wt% bulk rock, 58 ± 0.7 wt% glass SiO 2 ), sideromelane microlite crystallinity (20–30%), and microlite number density (plagioclase 6.4 ± 2.6 × 10 5 n/mm 3 ) did not change significantly over the eruption suggesting a similar magma source and ascent rate. We defined tephra componentry with groundmass microcrystalline textures using backscatter electron images. The componentry of tephra groundmass showed significant increases in tachylite grains, defined here by the presence of dendritic interstitial nanolites, corresponding to increasing seismic tremor and periods of increased ash emissions. We suggest that these componentry changes reflect increasing undercooled zones on the conduit margins that increased brittle shearing, fragmentation, and ultimately ash emissions.

Alaska↗

USGS2025

Fluid inclusion constraints on the geometry of the magmatic plumbing system beneath Mauna Loa – Part I: Lavas and tephras

There are few petrological constraints on magma storage depths at Mauna Loa, Hawai‘i. Yet understanding the geometry of the magmatic plumbing system is critical for interpreting geophysical signals of unrest at this very high-threat volcano. We address this gap by examining CO₂-rich fluid inclusions (FI) in lava and tephra from seven eruptions (8870 ± 56 14C yr BP, 1852, 1855, 1868, 1949, 1950, and 1984), supplemented with published data from 2022. Raman spectroscopy was used to determine FI densities, from which entrapment pressures were calculated using a CO₂-H₂O equation of state. Most FI record pressures of ~ 0.25–1.25 kbar (~ 2–5 km depth below the summit), consistent with geophysical estimates from the past 40 years. In summit eruptions, FI hosted in more evolved olivine and orthopyroxene clots (Fo and Mg# < 84) record slightly shallower pressures than those in more primitive olivines (Fo > 84) from rift zone eruptions, suggesting a crystal-poor evolved cap near the top of the reservoir (~ 2 km). The similarity in storage depths across all eight eruptions indicates that Mauna Loa’s magmas have tapped a quasi-stable reservoir over the past two centuries, and possibly over 10 kyr. Electron backscatter diffraction reveals deformations to the crystal lattice in Fo82-83 olivines, likely due to deformation during storage in mush piles. The intensity of deformation is comparable to that seen at Kīlauea, implying that mush pile stress may be decoupled from edifice size or longevity. Finally, SO₂ contents in FI increase from ~ 2 mol% at 2 kbar to ~ 15 mol% at 0.5 kbar, suggesting sulphur degassing begins far deeper than the 0.2–0.3 kbar commonly assumed for Hawaiian systems. This validates the newest generation of S degassing models (e.g., Sulfur_X), and explains precursory SO2 emissions in the ~3 hours prior to the onset of the 2022 eruption (Esse et al. 2025).

Hawaii↗

USGS2024

Real-time invasive sea lamprey detection using machine learning classifier models on embedded systems

Invasive sea lamprey ( Petromyzon marinus ) has historically inflicted considerable economic and ecological damage in the Great Lakes and continues to be a major threat. Accurately monitoring sea lampreys are critical to enabling the deployment of more targeted and effective control measures to minimize the impact associated with this species. This paper presents the first stand-alone system for real-time detection of sea lamprey attachment on underwater surfaces through the use of classifier models deployed on a microcontroller system. A range of low-complexity models was explored: single-layer artificial neural networks, logistic regression, Gaussian Naive-Bayes, decision trees, random forest, and Scalable, Efficient, and Fast classifieR (SEFR). Threshold models tuned using a multi-objective optimization formulation were also considered. Classifier models were trained with a dataset generated through live animal testing and presented accuracies between 80 and 86%. The models were deployed on an Arduino microcontroller platform and compared in classification accuracy, detection performance, time complexity, and memory size using real-time detection testing. Classification accuracies between 65 and 75% were observed during validation. Models demonstrated good capture rates for lamprey attachments (63–85%), and average detection delays ranging from 9 to 36 s. A video demonstrating the operation of the system during a real-time validation test is also included in this work. While there is room for improving the accuracy of the system, this research presents the first step toward an electronic sea lamprey monitoring system that can provide a detailed view of sea lamprey activity enhancing control and conservation efforts across its entire range.

Neural Computing and Applications↗

USGS2009

Enrichment and isolation of Bacillus beveridgei sp. nov., a facultative anaerobic haloalkaliphile from Mono Lake, California, that respires oxyanions of tellurium, selenium, and arsenic

Mono Lake sediment slurries incubated with lactate and tellurite [Te(IV)] turned progressively black with time because of the precipitation of elemental tellurium [Te(0)]. An enrichment culture was established from these slurries that demonstrated Te(IV)-dependent growth. The enrichment was purified by picking isolated black colonies from lactate/Te(IV) agar plates, followed by repeated streaking and picking. The isolate, strain MLTeJB, grew in aqueous Te(IV)-medium if provided with a small amount of sterile solid phase material (e.g., agar plug; glass beads). Strain MLTeJB grew at high concentrations of Te(IV) (~8 mM) by oxidizing lactate to acetate plus formate, while reducing Te(IV) to Te(0). Other electron acceptors that were found to sustain growth were tellurate, selenate, selenite, arsenate, nitrate, nitrite, fumarate and oxygen. Notably, growth on arsenate, nitrate, nitrite and fumarate did not result in the accumulation of formate, implying that in these cases lactate was oxidized to acetate plus CO 2 . Strain MLTeJB is a low G + C Gram positive motile rod with pH, sodium, and temperature growth optima at 8.5–9.0, 0.5–1.5 M, and 40°C, respectively. The epithet Bacillus beveridgei strain MLTeJB T is proposed.

California↗

USGS2013

Limited denitrification in glacial deposit aquifers having thick unsaturated zones (Long Island, USA)

The goal of this study was to demonstrate how the extent of denitrification, which is indirectly related to dissolved organ carbon and directly related to oxygen concentrations, can also be linked to unsaturated-zone thickness, a mappable aquifer property. Groundwater from public supply and monitoring wells in Northport on Long Island, New York state (USA), were analyzed for denitrification reaction progress using dissolved N 2 /Ar concentrations by membrane inlet mass spectrometry. This technique allows for discernment of small amounts of excess N 2 , attributable to denitrification. Results show an average 15 % of total nitrogen in the system was denitrified, significantly lower than model predictions of 35 % denitrification. The minimal denitrification is due to low dissolved organic carbon (29.3–41.1 μmol L −1 ) and high dissolved oxygen concentrations (58–100 % oxygen saturation) in glacial sediments with minimal solid-phase electron donors to drive denitrification. A mechanism is proposed that combines two known processes for aquifer re-aeration in unconsolidated sands with thick (>10 m) unsaturated zones. First, advective flux provides 50 % freshening of pore space oxygen in the upper 2 m due to barometric pressure changes. Then, oxygen diffusion across the water-table boundary occurs due to high volumetric air content in the unsaturated-zone catchment area.

Long Island Sound↗

USGS2014

To understand coral disease, look at coral cells

Diseases threaten corals globally, but 40 years on their causes remain mostly unknown. We hypothesize that inconsistent application of a complete diagnostic approach to coral disease has contributed to this slow progress. We quantified methods used to investigate coral disease in 492 papers published between 1965 and 2013. Field surveys were used in 65% of the papers, followed by biodetection (43%), laboratory trials (20%), microscopic pathology (21%), and field trials (9%). Of the microscopic pathology efforts, 57% involved standard histopathology at the light microscopic level (12% of the total investigations), with the remainder dedicated to electron or fluorescence microscopy. Most (74%) biodetection efforts focused on culture or molecular characterization of bacteria or fungi from corals. Molecular and immunological tools have been used to incriminate infectious agents (mainly bacteria) as the cause of coral diseases without relating the agent to specific changes in cell and tissue pathology. Of 19 papers that declared an infectious agent as a cause of disease in corals, only one (5%) used microscopic pathology, and none fulfilled all of the criteria required to satisfy Koch’s postulates as applied to animal diseases currently. Vertebrate diseases of skin and mucosal surfaces present challenges similar to corals when trying to identify a pathogen from a vast array of environmental microbes, and diagnostic approaches regularly used in these cases might provide a model for investigating coral diseases. We hope this review will encourage specialists of disease in domestic animals, wildlife, fish, shellfish, and humans to contribute to the emerging field of coral disease.

EcoHealth↗

USGS2015

Performance of an anaerobic, static bed, fixed film bioreactor for chlorinated solvent treatment

Anaerobic, fixed film, bioreactors bioaugmented with a dechlorinating microbial consortium were evaluated as a potential technology for cost effective, sustainable, and reliable treatment of mixed chlorinated ethanes and ethenes in groundwater from a large groundwater recovery system. Bench- and pilot-scale testing at about 3 and 13,500 L, respectively, demonstrated that total chlorinated solvent removal to less than the permitted discharge limit of 100 μg/L. Various planned and unexpected upsets, interruptions, and changes demonstrated the robustness and reliability of the bioreactor system, which handled the operational variations with no observable change in performance. Key operating parameters included an adequately long hydraulic retention time for the surface area, a constant supply of electron donor, pH control with a buffer to minimize pH variance, an oxidation reduction potential of approximately −200 millivolts or lower, and a well-adapted biomass capable of degrading the full suite of chlorinated solvents in the groundwater. Results indicated that the current discharge criteria can be met using a bioreactor technology that is less complex and has less downtime than the sorption based technology currently being used to treat the groundwater.

Biodegradation↗

USGS2015

Evidence from data storage tags for the presence of lunar and semilunar behavioral cycles in spawning Atlantic cod

Understanding the environmental processes determining the timing and success of reproduction is of critical importance to developing effective management strategies of marine fishes. Unfortunately it has proven difficult to comprehensively study the reproductive behavior of broadcast-spawning fishes. The use of electronic data storage tags (DSTs) has the potential to provide insights into the behavior of fishes. These tags allow for data collection over relatively large spatial and temporal scales that can be correlated to predicted environmental conditions and ultimately be used to refine predictions of year class strength. In this paper we present data retrieved from DSTs demonstrating that events putatively identified as Atlantic cod spawning behavior is tied to a lunar cycle with a pronounced semi-lunar cycle within it. Peak activity occurs around the full and new moon with no evidence of relationship with day/night cycles.

Environmental Biology of Fishes↗

USGS2015

Assessing dorsal scute microchemistry for reconstruction of shortnose sturgeon life histories

The imperiled status of sturgeons worldwide places priority on the identification and protection of critical habitats. We assessed the micro-structural and micro-chemical scope for a novel calcified structure, dorsal scutes, to be used for reconstruction of past habitat use and group separation in shortnose sturgeon ( Acipenser brevirostrum ). Dorsal scutes contained a dual-layered structure composed of a thin multi-layered translucent zone lying dorsally above a thicker multi-layered zone. Banding in the thick multi-layered zone correlated strongly with pectoral fin spine annuli supporting the presence of chronological structuring that could contain a chemical record of past environmental exposure. Trace element profiles (Sr:Ca), collected using both wavelength dispersive electron microprobe analysis and laser ablation inductively coupled mass spectrometry, suggest scutes record elemental information useful for tracing transitions between freshwater and marine environments. Moreover, mirror-image like Sr:Ca profiles were observed across the dual-zone structuring of the scute that may indicate duplication of the microchemical profile in a single structure. Additional element:calcium ratios measured in natal regions of dorsal scutes (Ba:Ca, Mg:Ca) suggest the potential for further refinement of techniques for identification of river systems of natal origin. In combination, our results provide proof of concept that dorsal scutes possess the necessary properties to be used as structures for reconstructions of past habitat use in sturgeons. Importantly, scutes may be collected non-lethally and with less injury than current structures, like otoliths and fin spines, affording an opportunity for broader application of microchemical techniques.

Environmental Biology of Fishes↗

USGS2010

Radionuclides, trace elements, and radium residence in phosphogypsum of Jordan

Voluminous stockpiles of phosphogypsum (PG) generated during the wet process production of phosphoric acid are stored at many sites around the world and pose problems for their safe storage, disposal, or utilization. A major concern is the elevated concentration of long-lived 226Ra (half-life = 1,600 years) inherited from the processed phosphate rock. Knowledge of the abundance and mode-of-occurrence of radium (Ra) in PG is critical for accurate prediction of Ra leachability and radon (Rn) emanation, and for prediction of radiation-exposure pathways to workers and to the public. The mean (??SD) of 226Ra concentrations in ten samples of Jordan PG is 601 ?? 98 Bq/kg, which falls near the midrange of values reported for PG samples collected worldwide. Jordan PG generally shows no analytically significant enrichment (< 10%) of 226Ra in the finer (< 53 ??m) grain size fraction. Phosphogypsum samples collected from two industrial sites with different sources of phosphate rock feedstock show consistent differences in concentration of 226Ra and rare earth elements, and also consistent trends of enrichment in these elements with increasing age of PG. Water-insoluble residues from Jordan PG constitute <10% of PG mass but contain 30-65% of the 226Ra. 226Ra correlates closely with Ba in the water-insoluble residues. Uniformly tiny (< 10 ??m) grains of barite (barium sulfate) observed with scanning electron microscopy have crystal morphologies that indicate their formation during the wet process. Barite is a well-documented and efficient scavenger of Ra from solution and is also very insoluble in water and mineral acids. Radium-bearing barite in PG influences the environmental mobility of radium and the radiation-exposure pathways near PG stockpiles. ?? 2010 US Government.

Environmental Geochemistry and Health↗

USGS2015

Development of the Global Earthquake Model’s neotectonic fault database

The Global Earthquake Model (GEM) aims to develop uniform, openly available, standards, datasets and tools for worldwide seismic risk assessment through global collaboration, transparent communication and adapting state-of-the-art science. GEM Faulted Earth (GFE) is one of GEM’s global hazard module projects. This paper describes GFE’s development of a modern neotectonic fault database and a unique graphical interface for the compilation of new fault data. A key design principle is that of an electronic field notebook for capturing observations a geologist would make about a fault. The database is designed to accommodate abundant as well as sparse fault observations. It features two layers, one for capturing neotectonic faults and fold observations, and the other to calculate potential earthquake fault sources from the observations. In order to test the flexibility of the database structure and to start a global compilation, five preexisting databases have been uploaded to the first layer and two to the second. In addition, the GFE project has characterised the world’s approximately 55,000 km of subduction interfaces in a globally consistent manner as a basis for generating earthquake event sets for inclusion in earthquake hazard and risk modelling. Following the subduction interface fault schema and including the trace attributes of the GFE database schema, the 2500-km-long frontal thrust fault system of the Himalaya has also been characterised. We propose the database structure to be used widely, so that neotectonic fault data can make a more complete and beneficial contribution to seismic hazard and risk characterisation globally.

Natural Hazards↗

USGS2012

Curiosity's Mars Hand Lens Imager (MAHLI) investigation

The Mars Science Laboratory (MSL) Mars Hand Lens Imager (MAHLI) investigation will use a 2-megapixel color camera with a focusable macro lens aboard the rover, Curiosity, to investigate the stratigraphy and grain-scale texture, structure, mineralogy, and morphology of geologic materials in northwestern Gale crater. Of particular interest is the stratigraphic record of a ?5 km thick layered rock sequence exposed on the slopes of Aeolis Mons (also known as Mount Sharp). The instrument consists of three parts, a camera head mounted on the turret at the end of a robotic arm, an electronics and data storage assembly located inside the rover body, and a calibration target mounted on the robotic arm shoulder azimuth actuator housing. MAHLI can acquire in-focus images at working distances from ?2.1 cm to infinity. At the minimum working distance, image pixel scale is ?14 μm per pixel and very coarse silt grains can be resolved. At the working distance of the Mars Exploration Rover Microscopic Imager cameras aboard Spirit and Opportunity, MAHLI?s resolution is comparable at ?30 μm per pixel. Onboard capabilities include autofocus, auto-exposure, sub-framing, video imaging, Bayer pattern color interpolation, lossy and lossless compression, focus merging of up to 8 focus stack images, white light and longwave ultraviolet (365 nm) illumination of nearby subjects, and 8 gigabytes of non-volatile memory data storage.

Space Science Reviews↗

USGS2012

The ChemCam Instrument Suite on the Mars Science Laboratory (MSL) Rover: Science objectives and mast unit description

ChemCam is a remote sensing instrument suite on board the "Curiosity" rover (NASA) that uses Laser-Induced Breakdown Spectroscopy (LIBS) to provide the elemental composition of soils and rocks at the surface of Mars from a distance of 1.3 to 7 m, and a telescopic imager to return high resolution context and micro-images at distances greater than 1.16 m. We describe five analytical capabilities: rock classification, quantitative composition, depth profiling, context imaging, and passive spectroscopy. They serve as a toolbox to address most of the science questions at Gale crater. ChemCam consists of a Mast-Unit (laser, telescope, camera, and electronics) and a Body-Unit (spectrometers, digital processing unit, and optical demultiplexer), which are connected by an optical fiber and an electrical interface. We then report on the development, integration, and testing of the Mast-Unit, and summarize some key characteristics of ChemCam. This confirmed that nominal or better than nominal performances were achieved for critical parameters, in particular power density (>1 GW/cm 2 ). The analysis spot diameter varies from 350 μm at 2 m to 550 μm at 7 m distance. For remote imaging, the camera field of view is 20 mrad for 1024×1024 pixels. Field tests demonstrated that the resolution (˜90 μrad) made it possible to identify laser shots on a wide variety of images. This is sufficient for visualizing laser shot pits and textures of rocks and soils. An auto-exposure capability optimizes the dynamical range of the images. Dedicated hardware and software focus the telescope, with precision that is appropriate for the LIBS and imaging depths-of-field. The light emitted by the plasma is collected and sent to the Body-Unit via a 6 m optical fiber. The companion to this paper (Wiens et al. this issue) reports on the development of the Body-Unit, on the analysis of the emitted light, and on the good match between instrument performance and science specifications.

Space Science Reviews↗

USGS2007

Biodegradation of PAHs and PCBs in soils and sludges

Results from a multi-year, pilot-scale land treatment project for PAHs and PCBs biodegradation were evaluated. A mathematical model, capable of describing sorption, sequestration, and biodegradation in soil/water systems, is applied to interpret the efficacy of a sequential active-passive biotreatment process of organic chemicals on remediation sites. To account for the recalcitrance of PAHs and PCBs in soils and sludges during long-term biotreatment, this model comprises a kinetic equation for organic chemical intraparticle sequestration process. Model responses were verified by comparison to measurements of biodegradation of PAHs and PCBs in land treatment units; a favorable match was found between them. Model simulations were performed to predict on-going biodegradation behavior of PAHs and PCBs in land treatment units. Simulation results indicate that complete biostabilization will be achieved when the concentration of reversibly sorbed chemical (S RA) reduces to undetectable levels, with a certain amount of irreversibly sequestrated residual chemical (S IA) remaining within the soil particle solid phase. The residual fraction (S IA) tends to lose its original chemical and biological activity, and hence, is much less available, toxic, and mobile than the "free" compounds. Therefore, little or no PAHs and PCBs will leach from the treatment site and constitutes no threat to human health or the environment. Biotreatment of PAHs and PCBs can be terminated accordingly. Results from the pilot-scale testing data and model calculations also suggest that a significant fraction (10-30%) of high-molecular-weight PAHs and PCBs could be sequestrated and become unavailable for biodegradation. Bioavailability (large K d , i.e., slow desorption rate) is the key factor limiting the PAHs degradation. However, both bioavailability and bioactivity (K in Monod kinetics, i.e., number of microbes, nutrients, and electron acceptor, etc.) regulate PCBs biodegradation. The sequential active-passive biotreatment can be a cost-effective approach for remediation of highly hydrophobic organic contaminants. The mathematical model proposed here would be useful in the design and operation of such organic chemical biodegradation processes on remediation sites. ?? 2007 Springer Science+Business Media B.V.

Water, Air, & Soil Pollution↗

USGS2020

Sediment record of mining legacy and water quality from a drinking-water reservoir, Aztec, New Mexico, USA

The record of mining legacy and water quality was investigated in sediments collected in 2018 from four trenches in the Aztec, New Mexico, drinking-water reservoir #1. Bulk chemical analysis of sediments with depth in the reservoir revealed variable trace-element (uranium, vanadium, arsenic, copper, sulfur, silver, lead, and zinc) concentrations, which appear to coincide with historical mining and milling operations. Cesium-137 age dating, which identified the location of the 1963 radioactive fallout maximum, combined with the known age of the bottom and top of the sediment trenches, was used to estimate a polynomial sedimentation rate (average rate = 1.7 cm/yr). The clay size fraction (< 0.004 mm) was the dominant grain-size fraction of the sediments. Abundant fine-grained phyllosilicate (clay) minerals, predominantly montmorillonite and kaolinite, may explain sorption properties of trace elements. Scanning electron microscopy evaluation of sediments from two trenches showed copper and zinc associated with sulfur, and arsenic associated with iron and aluminum oxides. Results from laboratory batch experiments indicated that uranium, vanadium, and arsenic were released when sediments were reacted with a 150 mg/L sodium bicarbonate solution whereas copper was released when sediments were reacted with 2 mMol/L acetic acid. Observed concentrations from the two leach tests were below regulatory thresholds for delivery of solids to a landfill and were below drinking-water standards. Diatom relative abundance indicates that the water quality in the reservoir was not impaired by high metal concentrations.

Colorado, New Mexico↗

USGS1972

Occurrence of chromian, hercynitic spinel ("pleonaste") in Apollo-14 samples and its petrologic implications

Many isolated grains of a reddish pleonaste-type spinel occur in fines and metabreccia samples, particularly 14 319. Electron microprobe analyses (104) of spinels and their associated phases include 58 of pleonaste which show Mg/(Mg + Fe) 0.44–0.62 and Cr/(Cr + Al) 0.017–0.134 (atomic), plus minor amounts of other ions, and differ greatly from almost all previously recorded lunar spinels; almost no spinels of intermediate composition were found. Two types of compositional zoning exist: a diffuse primary one with cores lower in Ti, and a narrow secondary one from reaction with matrix yielding rims higher in Cr, Ti, and Mn. At contacts with breccia matrix there is a narrow corona of almost pure plagioclase (An 80 -An 94 ), free of opaque minerals and pyroxene. Two types of solid inclusions found in the pleonaste are calcic plagioclase, and tiny spherical masses of nickel-rich sulfide. Similar pleonaste occurs in crystalline rock clasts, mainly with plagioclase; one clast (A) consists only of coarse olivine, plagioclase, and pleonaste, with granulated grain boundaries suggestive of deformation. From composition and texture, this clast is one possible candidate for the mafic cumulate counterpart of the “anorthositic” crust. Another clast (B), also made solely of olivine, plagioclase and pleonaste, is itself a breccia. These data suggest a two-stage brecciation process: 1) disruption (probably pre-Imbrian) of a deep-seated pleonaste-bearing source rock like A and reconsolidation to form a breccia without addition of pyroxene, ilmenite or other minerals; and 2) disruption of this breccia to yield breccia clast B which was then incorporated into the Fra Mauro formation.

Earth and Planetary Science Letters↗

USGS1972

Silicate melt inclusions and glasses in lunar soil fragments from the Luna 16 core sample

More than 2000 fragments were studied microscopically, and electron microprobe analyses were made of 39 selected areas, from a few square mm of polished surface, through 75- to 425-μm fragments of lunar soil from two samples of the Luna 16 core. The silicate melt inclusions and glasses differ in important details from those observed earlier in the Apollo samples. Melt inclusions in olivine contain epitaxially oriented daughter crystals, but also show a similar epitaxy around the outside of the crystals not observed in previous lunar samples. Melt inclusions in ilmenite suggest trapping at successive stages in a differentiation sequence. There is abundant evidence for late-stage silicate liquid immiscibility, with melt compositions similar but not identical to those from Apollo 11 and 12. A comparison of the alkali ratio of any given bulk rock analysis with that of its late-stage, high-silica melt shows gross differences for different rocks. This is pertinent to understanding late-stage differentiation processes. Glass fragments and spherules exhibit a wide range of crystallization textures, reflecting their wide range of compositions and cooling histories. No significant differences were found between the two portions of core examined (Zones A and D).

Earth and Planetary Science Letters↗