USGS Science⌕ Search

SEARCH · USGS Science

Results for “Remote Sensing”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25Linked to original sources
USGS2021

The potential of satellite remote sensing time series to uncover wetland phenology under unique challenges of tidal setting

While growth history of vegetation within upland systems is well studied, plant phenology within coastal tidal systems is less understood. Landscape-scale, satellite-derived indicators of plant greenness may not adequately represent seasonality of vegetation biomass and productivity within tidal wetlands due to limitations of cloud cover, satellite temporal frequency and attenu-ation of plant signals by tidal flooding. However, understanding plant phenology is necessary to gain insight into aboveground biomass, photosynthetic activity, and carbon sequestration. In this study we use a modeling approach to estimate plant greenness throughout a year in tidal wet-lands located within the San Francisco Bay Area, USA. We used variables such as EVI history, temperature, and elevation to predict plant greenness on a 14-day timestep. We found this ap-proach accurately estimated plant greenness, with larger error observed within more dynamic restored wetlands, particularly at early post-restoration stages. We also found modeled EVI can be used as an input variable into greenhouse gas models, allowing for an estimate of carbon se-questration and gross primary production. Our strategy can be further developed in future re-search by assessing restoration and management effects on wetland phenological dynamics and through incorporating the entire Sentinel-2 time-series once it becomes available within Google Earth Engine.

California↗
USGS1980

Remote sensing data of SP Mountain and SP Lava flow in north-central Arizona

Multifrequency airborne radar image data of SP Mountain [Official name of feature (U.S. Geological Survey, 1970)] and SP flow (and vicinity) in north-central Arizona were obtained in diverse viewing directions and direct and cross-polarization, then compared with surface and aerial photography, LANDSAT multispectral scanner data, airborne thermal infrared imagery, surface geology, and surface roughness statistics. The extremely blocky, basaltic andesite of SP flow is significantly brighter on direct-polarization K-band (0.9-cm wavelength) images than on cross-polarized images taken simultaneously. Conversely, for the longer wavelength (25 cm) L-band radar images, the cross-polarization image returns from SP flow are brighter than the direct-polarized image. This effect is explained by multiple scattering and the strong wavelength dependence of polarization effects caused by the rectilinear basaltic andesite scatters. Two distinct types of surface relief on SP flow, one extremely blocky, the other subdued, are found to be clearly discriminated on the visible and thermal wavelength images but are separable only on the longer wavelength L-band radar image data. The inability of the K- and X- (3-cm wavelength) band radars to portray the differences in roughness between the two SP flow surface units is attributed to the radar frequency dependence of the surface-relief scale, which, described as the Rayleigh criterion, represents the transition between quasispecular and primarily diffuse backscatter.

Arizona↗
USGS2018

Remotely sensing the morphometrics and dynamics of a cold region dune field using historical aerial photography and airborne LiDAR data

This study uses an airborne Light Detection and Ranging (LiDAR) survey, historical aerial photography and historical climate data to describe the character and dynamics of the Nogahabara Sand Dunes, a sub-Arctic dune field in interior Alaska’s discontinuous permafrost zone. The Nogahabara Sand Dunes consist of a 43-km 2 area of active transverse and barchanoid dunes within a 3200-km 2 area of vegetated dune and sand sheet deposits. The average dune height in the active portion of the dune field is 5.8 m, with a maximum dune height of 28 m. Dune spacing is variable with average crest-to-crest distances for select transects ranging from 66–132 m. Between 1952 and 2015, dunes migrated at an average rate of 0.52 m a −1 . Dune movement was greatest between 1952 and 1978 (0.68 m a −1 ) and least between 1978 and 2015 (0.43 m a −1 ). Dunes migrated predominantly to the southeast; however, along the dune field margin, net migration was towards the edge of the dune field regardless of heading. Better constraining the processes controlling dune field dynamics at the Nogahabara dunes would provide information that can be used to model possible reactivation of more northerly dune fields and sand sheets in response to climate change, shifting fire regimes and permafrost thaw.

Remote Sensing↗
USGS1993

Surficial geology of the Safsaf region, south-central Egypt, derived from remote-sensing and field data

We used a decorrelation-stretched image of Landsat Thematic Mapper (TM) Bands 1, 4, and 7 and field data to map and describe the main surficial units in the hyperarid Safsaf region in south-central Egypt. We show that the near-infrared bands on Landsat TM, which are sensitive to very subtle changes in mineralogy common to arid regions, significantly improve the geologist's capability to discriminate geologic units in desert regions. These data also provide the spatial and spectral information necessary to determine the migration patterns and provenance of eolian materials. The Safsaf area was the focus of our post flight field studies using Shuttle Imaging Radar (SIR) data following the discovery of buried paleochannels in North Africa. Most of the channels discernible on SIR images are not expressed in TM data, but traces of a few channels are present in both the SIR and the TM data within the Wadi Safsaf area. Here we present a detailed digital examination of the SIR and the TM-band reflectance and reflectance-ratio data at three locations of the more obvious surface expressions of the buried channels. Our results indicate that the TM expressions of the channels are not purely topographic but are more compositional in nature. Two possibilities may account for the TM expressions of the buried channels: 1) concentrations of windblown, iron-rich materials that accumulated along subtle curvilinear topograpohic traps, or 2) curvilinear exposures of an iron-rich underlying unit of the flat sand sheet.

Safsaf region↗
USGS2022

Remote sensing application for landslide detection, monitoring along eastern Lake Michigan (Miami Park, MI)

We assessed the nature and spatial and temporal patterns of deformation over the Miami Park bluffs on the eastern margin of Lake Michigan and investigated the factors controlling its observed deformation. Our approach involved the following steps: (1) extracting bluff deformation rates (velocities along the line of sight of the satellite) using a stack of Sentinel-1A radar imagery in ascending acquisition geometry acquired between 2017 and 2021 and applying the Intermittent Small Baseline Subset (ISBAS) InSAR time series analysis method; (2) generating high-resolution (5 cm) elevation models and orthophotos from temporal unmanned aerial vehicle (UAV) surveys acquired in 2017, 2019, and 2021; and (3) comparing the temporal variations in mass wasting events to other relevant datasets including the ISBAS-based bluff deformation time series, lake level (LL) variations, and local glacial stratigraphy. We identified areas witnessing high line-of-sight (LOS) deformation rates (up to −21 mm/year) along the bluff from the ISBAS analysis and seasonal deformation patterns associated with freeze-thaw cycles, suggesting a causal effect. The acceleration of slope failures detected from field and UAV acquisitions correlated with high LLs and intensified onshore wave energy in 2020. The adopted methodology successfully predicts landslides caused by freezes and thaws of the slope face by identifying prolonged slow deformation preceding slope failures, but it does not predict the catastrophic landslides preceded by short-lived LOS deformation related to LL rise.

Michigan↗
USGS2010

Active remote sensing of snow using NMM3D/DMRT and comparison with CLPX II airborne data

We applied the Numerical Maxwell Model of three-dimensional simulations (NMM3D) in the Dense Media Radiative Theory (DMRT) to calculate backscattering coefficients. The particles' positions are computer-generated and the subsequent Foldy-Lax equations solved numerically. The phase matrix in NMM3D has significant cross-polarization, particularly when the particles are densely packed. The NMM3D model is combined with DMRT in calculating the microwave scattering by dry snow. The NMM3D/DMRT equations are solved by an iterative solution up to the second order in the case of small to moderate optical thickness. The numerical results of NMM3D/DMRT are illustrated and compared with QCA/DMRT. The QCA/DMRT and NMM3D/DMRT results are also applied to compare with data from two specific datasets from the second Cold Land Processes Experiment (CLPX II) in Alaska and Colorado. The data are obtained at the Ku-band (13.95 GHz) observations using airborne imaging polarimetric scatterometer (POLSCAT). It is shown that the model predictions agree with the field measurements for both co-polarization and cross-polarization. For the Alaska region, the average snow depth and snow density are used as the inputs for DMRT. The grain size, selected from within the range of the ground measurements, is used as a best-fit parameter within the range. For the Colorado region, we use the Variable Infiltration Capacity Model (VIC) to obtain the input snow profiles for NMM3D/DMRT. ?? 2010 IEEE.

IEEE Journal of Selected Topics in Applied Earth O↗
USGS2003

Urban land-cover change detection through sub-pixel imperviousness mapping using remotely sensed data

We developed a Sub-pixel Imperviousness Change Detection (SICD) approach to detect urban land-cover changes using Landsat and high-resolution imagery. The sub-pixel percent imperviousness was mapped for two dates (09 March 1993 and 11 March 2001) over western Georgia using a regression tree algorithm. The accuracy of the predicted imperviousness was reasonable based on a comparison using independent reference data. The average absolute error between predicted and reference data was 16.4 percent for 1993 and 15.3 percent for 2001. The correlation coefficient (r) was 0.73 for 1993 and 0.78 for 2001, respectively. Areas with a significant increase (greater than 20 percent) in impervious surface from 1993 to 2001 were mostly related to known land-cover/land-use changes that occurred in this area, suggesting that the spatial change of an impervious surface is a useful indicator for identifying spatial extent, intensity, and, potentially, type of urban land-cover/land-use changes. Compared to other pixel-based change-detection methods (band differencing, rationing, change vector, post-classification), information on changes in sub-pixel percent imperviousness allow users to quantify and interpret urban land-cover/land-use changes based on their own definition. Such information is considered complementary to products generated using other change-detection methods. In addition, the procedure for mapping imperviousness is objective and repeatable, hence, can be used for monitoring urban land-cover/land-use change over a large geographic area. Potential applications and limitations of the products developed through this study in urban environmental studies are also discussed.

Photogrammetric Engineering and Remote Sensing↗
USGS2020

Implementation of a surface water extent model in Cambodia using cloud-based remote sensing

Mapping surface water over time provides the spatially explicit information essential for hydroclimatic research focused on droughts and flooding. Hazard risk assessments and water management planning also rely on accurate, long-term measurements describing hydrologic fluctuations. Stream gages are a common measurement tool used to better understand flow and inundation dynamics, but gage networks are incomplete or non-existent in many parts of the world. In such instances, satellite imagery may provide the only data available to monitor surface water changes over time. Here, we describe an effort to extend the applicability of the USGS Dynamic Surface Water Extent (DSWE) model to non-US regions. We leverage the multi-decadal archive of the Landsat satellite in the Google Earth Engine (GEE) cloud-based computing platform to produce and analyze 372 monthly composite maps and 31 annual maps (January 1988–December 2018) in Cambodia, a flood-prone country in Southeast Asia that lacks a comprehensive stream gage network. DSWE relies on a series of spectral water indices and elevation data to classify water into four categories of water inundation. We compared model outputs to existing surface water maps and independently assessed DSWE accuracy at discrete dates across the time series. Despite considerable cloud obstruction and missing imagery across the monthly time series, the overall accuracy exceeded 85% for all annual tests. The DSWE model consistently mapped open water with high accuracy, and areas classified as “high confidence” water correlate well to other available maps at the country scale. Results in Cambodia suggest that extending DSWE globally using a cloud computing framework may benefit scientists, managers, and planners in a wide array of applications across the globe.

Remote Sensing↗
USGS2007

Improved wetland remote sensing in Yellowstone National Park using classification trees to combine TM imagery and ancillary environmental data

The U.S. Fish and Wildlife Service uses the term palustrine wetland to describe vegetated wetlands traditionally identified as marsh, bog, fen, swamp, or wet meadow. Landsat TM imagery was combined with image texture and ancillary environmental data to model probabilities of palustrine wetland occurrence in Yellowstone National Park using classification trees. Model training and test locations were identified from National Wetlands Inventory maps, and classification trees were built for seven years spanning a range of annual precipitation. At a coarse level, palustrine wetland was separated from upland. At a finer level, five palustrine wetland types were discriminated: aquatic bed (PAB), emergent (PEM), forested (PFO), scrub–shrub (PSS), and unconsolidated shore (PUS). TM-derived variables alone were relatively accurate at separating wetland from upland, but model error rates dropped incrementally as image texture, DEM-derived terrain variables, and other ancillary GIS layers were added. For classification trees making use of all available predictors, average overall test error rates were 7.8% for palustrine wetland/upland models and 17.0% for palustrine wetland type models, with consistent accuracies across years. However, models were prone to wetland over-prediction. While the predominant PEM class was classified with omission and commission error rates less than 14%, we had difficulty identifying the PAB and PSS classes. Ancillary vegetation information greatly improved PSS classification and moderately improved PFO discrimination. Association with geothermal areas distinguished PUS wetlands. Wetland over-prediction was exacerbated by class imbalance in likely combination with spatial and spectral limitations of the TM sensor. Wetland probability surfaces may be more informative than hard classification, and appear to respond to climate-driven wetland variability. The developed method is portable, relatively easy to implement, and should be applicable in other settings and over larger extents.

Remote Sensing of Environment↗
USGS2011

Integration of Palmer Drought Severity Index and remote sensing data to simulate wetland water surface from 1910 to 2009 in Cottonwood Lake area, North Dakota

Spatiotemporal variations of wetland water in the Prairie Pothole Region are controlled by many factors; two of them are temperature and precipitation that form the basis of the Palmer Drought Severity Index (PDSI). Taking the 196 km 2 Cottonwood Lake area in North Dakota as our pilot study site, we integrated PDSI, Landsat images, and aerial photography records to simulate monthly water surface. First, we developed a new Wetland Water Area Index (WWAI) from PDSI to predict water surface area. Second, we developed a water allocation model to simulate the spatial distribution of water bodies at a resolution of 30 m. Third, we used an additional procedure to model the small wetlands (less than 0.8 ha) that could not be detected by Landsat. Our results showed that i) WWAI was highly correlated with water area with an R 2 of 0.90, resulting in a simple regression prediction of monthly water area to capture the intra- and inter-annual water change from 1910 to 2009; ii) the spatial distribution of water bodies modeled from our approach agreed well with the water locations visually identified from the aerial photography records; and iii) the R 2 between our modeled water bodies (including both large and small wetlands) and those from aerial photography records could be up to 0.83 with a mean average error of 0.64 km 2 within the study area where the modeled wetland water areas ranged from about 2 to 14 km 2 . These results indicate that our approach holds great potential to simulate major changes in wetland water surface for ecosystem service; however, our products could capture neither the short-term water change caused by intensive rainstorm events nor the wetland change caused by human activities.

North Dakota↗
USGS2024

Fine-scale surficial soil moisture mapping using UAS-based L-band remote sensing in a mixed oak-grassland landscape

Soil moisture maps provide quantitative information that, along with climate and energy balance, is critical to integrate with hydrologic processes for characterizing landscape conditions. However, soil moisture maps are difficult to produce for natural landscapes because of vegetation cover and complex topography. Satellite-based L-band microwave sensors are commonly used to develop spatial soil moisture data products, but most existing L-band satellites provide only coarse scale (one to tens of kilometers grid size), information that is unsuitable for measuring soil moisture variation at hillslope or watershed-scales. L-band sensors are typically deployed on satellite platforms and aircraft but have been too large to deploy on small uncrewed aircraft systems (UAS). There is a need for greater spatial resolution and development of effective measures of soil moisture across a variety of natural vegetation types. To address these challenges, a novel UAS-based L-band radiometer system was evaluated that has recently been tested in agricultural settings. In this study, L-band UAS was used to map soil moisture at 3–50-m (m) resolution in a 13 square kilometer (km 2 ) mixed grassland-forested landscape in Sonoma County, California. The results represent the first application of this technology in a natural landscape with complex topography and vegetation. The L-band inversion of the radiative transfer model produced soil moisture maps with an average unbiased root mean squared error (ubRMSE) of 0.07 m 3 /m 3 and a bias of 0.02 m 3 /m 3 . Improved fine-scale soil moisture maps developed using UAS-based systems may be used to help inform wildfire risk, improve hydrologic models, streamflow forecasting, and early detection of landslides.

California↗
USGS2024

Snow-cover remote sensing of conifer tree recovery in high-severity burn patches

The number of large, high-severity wildfires has been increasing across the western United States over the last several decades. It is not fully understood how changes in the frequency of large, severe wildfires may impact the resilience of conifer forests, due to alterations in regeneration success or failure. Our research investigates 30 years of conifer recovery patterns within 34 high-severity wildfire complexes (1988–1991) of the Northern Rocky Mountains. We evaluate the capability of snow-cover Landsat to characterize conifer tree recolonization of high-severity burn patches. Snow-cover images isolate conifer-specific vegetation signals by diminishing spectral contributions from soil and deciduous vegetation. The presence of conifer regeneration was successfully classified by snow-cover Landsat at >10% canopy cover at 98% accuracy and modeled at 3-year intervals post-fire. Spectral detectability of regenerating conifer vegetation began 11–19 years post-fire, varying across forest types. Thirty years post-fire, 65% of the total high-severity burn area had been recolonized by conifer trees, with differences observed between forest types: 72% of lodgepole pine, 77% of Douglas-fir, and 44% of fir-spruce severely burned areas containing conifer regeneration. Projected recovery timelines to pre-fire conifer vegetation also differed between lodgepole pine (29.5 years), Douglas-fir (36.9 years), and fir-spruce forests (48.7 years), as estimated from snow-cover NDVI trends. Although we generally documented patterns of conifer resilience, we also identified reduced likelihoods of recovery within high-severity burn patches exhibiting greater area-to-perimeter ratios, aridity, south-facing aspects, slopes, and elevation. Snow-cover Landsat imagery was shown to improve the characterization of post-fire forest recovery and may be applied to support forest restoration decision-making following high-severity wildfire.

Remote Sensing of Environment↗
USGS2014

Land cover change on the Seward Peninsula: The use of remote sensing to evaluate the potential influences of climate warming on historical vegetation dynamics

Vegetation on the Seward Peninsula, Alaska, which is characterized by transitions from tundra to boreal forest, may be sensitive to the influences of climate change on disturbance and species composition. To determine the ability to detect decadal-scale structural changes in vegetation. Change Vector Analysis (CVA) techniques were evaluated for Landsat Thematic Mapper (TM) imagery of the Seward Peninsula from 1986 to 1999. Scenes were geographically corrected to sub-pixel accuracy and then radiometrically rectified. Between the 1986 and 1992 satellite scenes, the CVA detected changes in direction and magnitude of the two indices (TM Band 4/TM Band 3. TM Band 5). For Row 14, change was detected for 135,518 ha and for Row 15, change was detected for 111,831 ha. Between the 1992 and 1999 scenes, change was detected by CVA for 93,278 ha. CVA results and photo interpretation together show that shrub advance is approximately 100 metres in valleys north of the Bendeleben Mountains and that shrubs have increased along riverbed bottoms. Across Path 78 Row 14 and 15, the unsupervised classification detected that 55% of the pixels changed between 1986 and 1992. Overall, approximately 759,610 ha changed to a class with a more developed canopy and only 268,132 ha changed to a class with a less developed canopy. Thus, the change detection analysis based on the unsupervised classification indicates that land-cover change on the Seward Peninsula was predominantly in the direction of increased shrubbiness. Taken together, our comparison of CVA results, unsupervised classification results, and visual interpretation of aerial photographs suggests that shrub cover may be increasing on the Seward Peninsula, which is consistent with results from experimental warming in tundra. The use of both CVA and unsupervised classification together provided a more powerful interpretation of change than either method alone in transitional regions between tundra and boreal forest.

Canadian Journal of Remote Sensing↗
USGS2018

Optimizing a remote sensing production efficiency model for macro-scale GPP and yield estimation in agroecosystems

Earth observation data are increasingly used to provide consistent eco-physiological information over large areas through time. Production efficiency models (PEMs) estimate Gross Primary Production (GPP) as a function of the fraction of photosynthetically active radiation absorbed by the canopy, which is derived from Earth observation. GPP can be summed over the growing season and adjusted by a crop-specific harvest index to estimate yield. Although PEMs have many advantages over other crop yield models, they are not widely used, because performance is relatively poor. Here, a new PEM is presented that addresses deficiencies for macro-scale application: Production Efficiency Model Optimized for Crops (PEMOC). It was developed by optimizing functions from the literature with GPP estimated by eddy covariance flux towers in the United States. The model was evaluated using newly developed Earth observation products and county-level yield statistics for major crops. PEMOC generally performed better at the field and county level than another commonly used PEM, the Moderate Resolution Imaging Spectroradiometer GPP (MOD17). PEMOC and MOD17 estimates of GPP had an R 2 and root mean squared error (RMSE) over the growing season of 0.71–0.89 (9.87–17.47 g CO 2 d −1 ) and 0.59–0.83 (6.86–22.20 g CO 2 d −1 ) with flux tower GPP. PEMOC produced R 2 s and RMSE of 0.70 (0.52), 0.60 (0.61), and 0.62 (0.59), while MOD17 produced R 2 s and RMSE of 0.65 (0.57), 0.53 (0.66), and 0.65 (0.57) with corn, soybean, and winter wheat crop yield anomalies. The sample size of rice was small, so yields were compared directly. PEMOC and MOD17 produced R 2 s and RMSE of 0.53 (3.42 t ha −1 ) and 0.40 (4.89 t ha −1 ). The most sizeable model improvements were seen for C 3 and C 4 crops during emergence/senescence and peak season, respectively. These improvements were attributed to C 3 and C 4 partitioning, optimized temperature and moisture constraints, and an evapotranspiration-based soil moisture index.

Remote Sensing of Environment↗
USGS2013

Spectroscopic remote sensing of the distribution and persistence of oil from the Deepwater Horizon spill in Barataria Bay marshes

We applied a spectroscopic analysis to Airborne Visible/InfraRed Imaging Spectrometer (AVIRIS) data collected from low and medium altitudes during and after the Deepwater Horizon oil spill to delineate the distribution of oil-damaged canopies in the marshes of Barataria Bay, Louisiana. Spectral feature analysis compared the AVIRIS data to reference spectra of oiled marsh by using absorption features centered near 1.7 and 2.3 μm, which arise from CH bonds in oil. AVIRIS-derived maps of oiled shorelines from the individual dates of July 31, September 14, and October 4, 2010, were 89.3%, 89.8%, and 90.6% accurate, respectively. A composite map at 3.5 m grid spacing, accumulated from the three dates, was 93.4% accurate in detecting oiled shorelines. The composite map had 100% accuracy for detecting damaged plant canopy in oiled areas that extended more than 1.2 m into the marsh. Spatial resampling of the AVIRIS data to 30 m reduced the accuracy to 73.6% overall. However, detection accuracy remained high for oiled canopies that extended more than 4 m into the marsh (23 of 28 field reference points with oil were detected). Spectral resampling of the 3.5 m AVIRIS data to Landsat Enhanced Thematic Mapper (ETM) spectral response greatly reduced the detection of oil spectral signatures. With spatial resampling of simulated Landsat ETM data to 30 m, oil signatures were not detected. Overall, ~ 40 km of coastline, marsh comprised mainly of Spartina alterniflora and Juncus roemerianus, were found to be oiled in narrow zones at the shorelines. Zones of oiled canopies reached on average 11 m into the marsh, with a maximum reach of 21 m. The field and airborne data showed that, in many areas, weathered oil persisted in the marsh from the first field survey, July 10, to the latest airborne survey, October 4, 2010. The results demonstrate the applicability of high spatial resolution imaging spectrometer data to identifying contaminants in the environment for use in evaluating ecosystem disturbance and response.

Louisiana↗
USGS2012

Assessing future risks to agricultural productivity, water resources and food security: How can remote sensing help?

Although global food production has been rising, the world sti ll faces a major food security challenge. Over one billion people are currently undernourished (Wheeler and Kay, 2010). By the 2050s, the human population is projected to grow to 9.1 billion. Over three-quarters of these people will be living in developing countries, in regions that already lack the capacity to feed their populations . Under current agricultural practices, the increased demand for food would require in excess of one billion hectares of new cropland, nearly equivalent to the land area of the United States, and would lead to significant increases in greenhouse gases (Tillman et al. , 2011). Since climate is the primary determinant of agricultural productivity, changes to it will influence not only crop yields, but also hydrologic balances and supplies of inputs to managed farming systems, and may lead to a shift in the geographic location of some crops . Therefore, not only must crop productivity (yield per unit of land; kg/m 2 ) increase, but water productivity (yield per unit of water or "crop per drop"; kg/m 3 ) must increase as well in order to feed a burgeoning population against a backdrop of changing dietary consumption patterns, a changing climate and the growing scarcity of water and land (Beddington, 2010). The impact from these changes wi ll affect the viability of both dryland subsistence and irrigated commodity food production (Knox, et al. , 2010a). Since climate is a primary determinant of agricultural productivity, any changes will influence not only crop yields, but also the hydrologic balances, and supplies of inputs to managed farming systems as well as potentially shifting the geographic location for specific crops . Unless concerted and collective action is taken, society risks worldwide food shortages, scarcity of water resources and insufficient energy. This has the potential to unleash public unrest, cross-border conflicts and migration as people flee the worst-affected regions to seck refuge in "safe havens", a situation that Beddington described as the "perfect storm" (2010).

Photogrammetric Engineering and Remote Sensing↗
USGS2007

Characterization of post-fire surface cover, soils, and burn severity at the Cerro Grande Fire, New Mexico, using hyperspectral and multispectral remote sensing

Forest fires leave behind a changed ecosystem with a patchwork of surface cover that includes ash, charred organic matter, soils and soil minerals, and dead, damaged, and living vegetation. The distributions of these materials affect post-fire processes of erosion, nutrient cycling, and vegetation regrowth. We analyzed high spatial resolution (2.4??m pixel size) Airborne Visible and Infrared Imaging Spectrometer (AVIRIS) data collected over the Cerro Grande fire, to map post-fire surface cover into 10 classes, including ash, soil minerals, scorched conifer trees, and green vegetation. The Cerro Grande fire occurred near Los Alamos, New Mexico, in May 2000. The AVIRIS data were collected September 3, 2000. The surface cover map revealed complex patterns of ash, iron oxide minerals, and clay minerals in areas of complete combustion. Scorched conifer trees, which retained dry needles heated by the fire but not fully combusted by the flames, were found to cover much of the post-fire landscape. These scorched trees were found in narrow zones at the edges of completely burned areas. A surface cover map was also made using Landsat Enhanced Thematic Mapper plus (ETM+) data, collected September 5, 2000, and a maximum likelihood, supervised classification. When compared to AVIRIS, the Landsat classification grossly overestimated cover by dry conifer and ash classes and severely underestimated soil and green vegetation cover. In a comparison of AVIRIS surface cover to the Burned Area Emergency Rehabilitation (BAER) map of burn severity, the BAER high burn severity areas did not capture the variable patterns of post-fire surface cover by ash, soil, and scorched conifer trees seen in the AVIRIS map. The BAER map, derived from air photos, also did not capture the distribution of scorched trees that were observed in the AVIRIS map. Similarly, the moderate severity class of Landsat-derived burn severity maps generated from the differenced Normalized Burn Ratio (dNBR) calculation had low agreement with the AVIRIS classes of scorched conifer trees. Burn severity and surface cover images were found to contain complementary information, with the dNBR map presenting an image of degree of change caused by fire and the AVIRIS-derived map showing specific surface cover resulting from fire.

Remote Sensing of Environment↗
USGS2012

Crop classification modelling using remote sensing and environmental data in the Greater Platte River Basin, USA

With an ever expanding population, potential climate variability and an increasing demand for agriculture-based alternative fuels, accurate agricultural land-cover classification for specific crops and their spatial distributions are becoming critical to researchers, policymakers, land managers and farmers. It is important to ensure the sustainability of these and other land uses and to quantify the net impacts that certain management practices have on the environment. Although other quality crop classification products are often available, temporal and spatial coverage gaps can create complications for certain regional or time-specific applications. Our goal was to develop a model capable of classifying major crops in the Greater Platte River Basin (GPRB) for the post-2000 era to supplement existing crop classification products. This study identifies annual spatial distributions and area totals of corn, soybeans, wheat and other crops across the GPRB from 2000 to 2009. We developed a regression tree classification model based on 2.5 million training data points derived from the National Agricultural Statistics Service (NASS) Cropland Data Layer (CDL) in relation to a variety of other relevant input environmental variables. The primary input variables included the weekly 250 m US Geological Survey Earth Observing System Moderate Resolution Imaging Spectroradiometer normalized differential vegetation index, average long-term growing season temperature, average long-term growing season precipitation and yearly start of growing season. An overall model accuracy rating of 78% was achieved for a test sample of roughly 215 000 independent points that were withheld from model training. Ten 250 m resolution annual crop classification maps were produced and evaluated for the GPRB region, one for each year from 2000 to 2009. In addition to the model accuracy assessment, our validation focused on spatial distribution and county-level crop area totals in comparison with the NASS CDL and county statistics from the US Department of Agriculture (USDA) Census of Agriculture. The results showed that our model produced crop classification maps that closely resembled the spatial distribution trends observed in the NASS CDL and exhibited a close linear agreement with county-by-county crop area totals from USDA census data ( R 2 = 0.90).

Greater Platte River Basin↗