USGS Science⌕ Search

SEARCH · USGS Science

Results for “Processes”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25Linked to original sources

Preferential elution of ionic solutes in melting snowpacks: Improving process understanding through field observations and modeling in the Rocky Mountains

The preferential elution of ions from melting snowpacks is a complex problem that has been linked to temporary acidification of water bodies. However, the understanding of these processes in snowpacks around the world, including the polar regions that are experiencing unprecedented warming and melting, remains limited despite being instrumental in supporting climate change adaptation. In this study, data collected from a snowmelt lysimeter and snowpits at meadow and forest-gap sites in a high elevation watershed in Colorado were combined with the PULSE multi-phase snowpack chemistry model to investigate the controls of meltwater chemistry and preferential elution. The snowdepth at the meadow site was 64% of that at the forest-gap site, and the snowmelt rate was greater there (meadow snowpit) due to higher solar irradiance. Cations such as Ca 2+ and NH 4 + "> 4+ were deposited mostly within the upper layers of both the meadow and forest-gap snowpacks, and acid anions such as NO 3 − "> 3− and SO 4 2 − "> 42− were more evenly distributed. The snow ion concentrations were generally greater at the forest-gap snowpit, except for NH 4 + "> 4+ , which indicates that wind erosion of wet and dry deposited ions from the meadow may have reduced concentrations of residual snow. Furthermore, at the forest-gap site, snow interception and scavenging processes such as sublimation, ventilation, and throughfall led to particular ion enrichment of Ca 2+ , Mg 2+ , K + , Cl − , SO 4 2 − "> 42− and NO 3 − "> 3− . Model simulations and observations highlight that preferential elution is enhanced by low snowmelt rates, with the model indicating that this is due to lower dilution rates and increased contact time and area between the percolating meltwater and the snow. Results suggest that low snowmelt rates can cause multiple early meltwater ionic pulses for ions subject to lower ion exclusion. Ion exclusion rates at the grain-size level have been estimated for the first time.

Colorado↗

Evidence and characteristics of hydrolytic disproportionation of organic matter during metasomatic processes

Petroleum-geochemical analyses of carbonaceous regionally metamorphosed rocks, carbonaceous rocks from ore deposits, and alkalic plutonic rocks from diverse settings, demonstrated the presence of very low to moderately low concentrations of solvent-extractable organic matter, this observation in spite of the fact that some of these rocks were exposed to extremely high metamorphic temperatures. Biomarker and ??13C analyses established that the extractable organic matter originated as sedimentary-derived hydrocarbons. However, the chemistry of the extractable bitumen has been fundamentally transformed from that found in sediment bitumen and oils. Asphaltenes and resins, as defined in the normal petroleum-geochemical sense, are completely missing. The principal aromatic hydrocarbons present in oils and sediment bitumens (especially the methylated naphthalenes) are either in highly reduced concentrations or are missing altogether, Instead, aromatic hydrocarbons typical of sediment bitumens and oils are very minor, and a number of unidentified compounds and oxygen-bearing compounds are dominant. Relatively high concentrations of alkylated benzenes are typical. The polar "resin" fraction, eluted during column chromatography, is the principal compound group, by weight, being composed of six to eight dominant peaks present in all samples, despite the great geologic diversity of the samples. These, and other, observations suggest that a strong drive towards equilibrium exists in the "bitumen." Gas chromatograms of the saturated hydrocarbons commonly have a pronounced hump in both the n-paraffins and naphthenes, centered near the C19 to C26 carbon numbers, and a ubiquitos minimum in the n-paraffin distribution near n-C12 to n-C14. Multiple considerations dictate that the bitumen in the samples is indigenous and did not originate from either surficial field contamination or from laboratory procedures. Our observations are consistent with the hydrolytic disproportion of organic matter (HDOM), in which water and organic matter, including hydrocarbons, easily exchange hydrogen or oxygen with one another under certain conditions (Helgeson et al., 1993). The process appears to take place via well-known organic-chemical redox reaction pathways and is most evident in open-fluid systems. The conclusion that HDOM took place in the analyzed samples, thus producing the chemistry of the extractable bitumen, is supported by numerous previously published organic-geochemical studies of metamorphic, volcanic, plutonic, and ore-deposit-related rocks by other investigators. HDOM is suggested as an unrecognized geologic agent of fundamental importance. The process appears to control major chemical reactions in diverse geologic environments including, but not limited to, petroleum geology and geochemistry, regional metamorphism, and base- and precious-metal ore deposition. Copyright ?? 2001 Elsevier Science Ltd.

Geochimica et Cosmochimica Acta↗

Processes controlling the episodic streamwater transport of atrazine and other agrichemicals in an agricultural watershed

Episodic streamwater transport of atrazine (a common agricultural herbicide) and nutrients has been observed throughout agricultural watersheds in the United States and poses a serious threat to the quality of its water resources. Catchment-scale atrazine and nutrient transport processes after agricultural application are still poorly understood, and predicting episodic streamwater composition remains an elusive goal. We instrumented a 1.2-km 2 agricultural catchment near Harrisonburg, Virginia, and examined streamwater, overland flow, soil water, groundwater, and rainfall during the summer of 1998. Storm chemographs demonstrated different patterns for constituents derived primarily from weathering (silica and calcium), compared to constituents derived primarily from early spring land applications (nitrate, atrazine, DOC, potassium, chloride, and sulfate). During storms, the concentrations of silica and calcium decreased, the atrazine response was variable, and the concentrations of nitrate, DOC, potassium, chloride, and sulfate increased; the elevated nitrate signal lagged several hours behind the other elevated constituents. Graphical and statistical analyses indicated a relatively stable spring-fed baseflow was modified by a mixture of overland flow and soil water. A rapid, short-duration overland-flow pulse dominated the streamflow early in the event and contributed most of the potassium, DOC, chloride, suspended sediment, and atrazine. A longer-duration soil–water pulse dominated the streamflow later in the event and contributed the nitrate as well as additional potassium, DOC, sulfate, and atrazine. The contributions to the episodic streamflow were quantified using a flushing model in which overland-flow and soil–water concentrations decreased exponentially with time during an episode. Flushing time constants for the overland-flow and soil–water reservoirs were calculated on a storm-by-storm basis using separate tracers for each time-variable reservoir. Initial component concentrations were estimated through regression analyses. Mass-balance calculations were used for flow separations and to predict the observed streamwater composition. Model forecasts indicated that reduced fertilizer and pesticide application (rather than elimination of overland-flow or soil–water contributions) was necessary to improve the episodic streamwater composition. This study provides important additional understanding of the catchment-scale processes by which land-applied pesticides and nutrients can move through agricultural systems.

Virginia↗

Influence of fluvial processes on the quaternary geologic framework of the continental shelf, North Carolina, USA

Digital, single-channel, high-resolution seismic reflection profiles were acquired from the insular continental shelf of North Carolina, USA along a data grid extending from Oregon Inlet northward 48 km to Duck, North Carolina and from the nearshore zone seaward approximately 28 km (total surveyed area= 1334 km2). These data were processed and interpreted to delineate principal reflecting horizons and develop a three-dimensional seismic stratigraphic framework for the continental shelf that was compared to stratigraphic data from the shoreward back-barrier (estuarine) and barrier island system. Six principal reflecting horizons (designated R0 through R5) were present within the upper 60 m of the shelf stratigraphic succession. Three-dimensional mapping of reflector R1 demonstrated its origin from fluvial incision of the continental shelf during an episode (or episodes) of lowered sea-level. Fluvial processes during development of reflector R1 were responsible for extensive reworking and re-deposition of sediment throughout most of the northern half of the study area. Five seismic stratigraphic units (designated S1 through S5) were tentatively correlated with depositional sequences previously identified from the North Carolina back-barrier (estuarine) and barrier island system. These five stratigraphic units span the Quaternary Period (S1 = early Holocene; S2 = 51-78 ka; S3 = 330-530 ka; S4 = 1.1-1.8 Ma; S5 = earliest Pleistocene). Unit S1 is composed of fine-grained fluvial/estuarine sediment that back-filled incised streams during early Holocene sea-level rise. The four other stratigraphic units (S2-S5) display tabular depositional geometries, low total relief, and thicken toward the east-southeast as their basal reflectors dip gently between 0.41 m km-1 (0.02??) and 0.54 m km-1 (0.03??). Knowledge of the three-dimensional subsurface stratigraphic architecture of the continental shelf enhances understanding of the development of shelf depositional successions and provides a framework for development of better Quaternary sea-level data, especially offshore North Carolina where such data are sparse. ?? 2002 Elsevier Science B.V. All rights reserved.

Marine Geology↗

Mercury mine drainage and processes that control its environmental impact

Mine drainage from mercury mines in the California Coast Range mercury mineral belt is an environmental concern because of its acidity and high sulfate, mercury, and methylmercury concentrations. Two types of mercury deposits are present in the mineral belt, silica-carbonate and hot-spring type. Mine drainage is associated with both deposit types but more commonly with the silica-carbonate type because of the extensive underground workings present at these mines. Mercury ores consisting primarily of cinnabar were processed in rotary furnaces and retorts and elemental mercury recovered from condensing systems. During the roasting process mercury phases more soluble than cinnabar are formed and concentrated in the mine tailings, commonly termed calcines. Differences in mineralogy and trace metal geochemistry between the two deposit types are reflected in mine drainage composition. Silica-carbonate type deposits have higher iron sulfide content than hot- spring type deposits and mine drainage from these deposits may have extreme acidity and very high concentrations of iron and sulfate. Mercury and methylmercury concentrations in mine drainage are relatively low at the point of discharge from mine workings. The concentration of both mercury species increases significantly in mine drainage that flows through and reacts with calcines. The soluble mercury phases in the calcines are dissolved and sulfate is added such that methylation of mercury by sulfate reducing bacteria is enhanced in calcines that are saturated with mine drainage. Where mercury mine drainage enters and first mixes with stream water, the addition of high concentrations of mercury and sulfate generates a favorable environment for methylation of mercury. Mixing of oxygenated stream water with mine drainage causes oxidation of dissolved iron(II) and precipitation of iron oxyhydroxide that accumulates in the streambed. Both mercury and methylmercury are strongly adsorbed onto iron oxyhydroxide over the pH range of 3.2-7.1 in streams impacted by mine drainage. The dissolved fraction of both mercury species is depleted and concentrated in iron oxyhydroxide such that the amount of iron oxyhydroxide in the water column reflects the concentration of mercury species. In streams impacted by mine drainage, mercury and methylmercury are transported and adsorbed onto particulate phases. During periods of low stream flow, fine-grained iron hydroxide sediment accumulates in the bed load of the stream and adsorbs mercury and methylmercury such that both forms of mercury become highly enriched in the iron oxyhydroxide sediment. During high-flow events, mercury- and methylmercury-enriched iron hydroxide sediment is transported into larger aquatic systems producing a high flux of bioavailable mercury. (C) 2000 Elsevier Science B.V.

Science of the Total Environment↗

Integration of a numerical model and remotely sensed data to study urban/rural land surface climate processes

Simulation of urban/rural land surface climate processes using boundary layer climate models requires accurate input data with regard to surface thermal and radiative properties. The research reported here resulted in development of a procedure to integrate the satellite-derived surface biophysical parameters with a boundary layer climate model for simulating spatial surface energy exchange. The procedure was tested through spatial surface energy balance simulation of an urban/rural landscape in eastern Nebraska. The modeled surface temperature and net radiation were compared to those derived from the concurrent satellite data. The errors of the modeled surface temperature were small, and were mainly attributed to uncertainties in the estimation of surface moisture availability and satellite-derived surface radiant temperature. Modeled net radiation was also in agreement with the values calculated from satellite data. Modeled turbulent heat fluxes were in general agreement as compared to those reported in the literature, but the model tended to overestimate the latent heat flux for most rural land cover types. It was concluded that by incorporation of satellite-derived surface physical parameters into a boundary layer model, simulation of spatial land surface climate processes was much improved. The method and procedures developed from this study can be utilized in other boundary layer climate models.

Nebraska↗

Physio-chemical processes affecting copper, tin and zinc toxicity to algae: A review

This chapter focuses on the physic-chemical processes affecting copper, zinc, and tin toxicity to algae. Both Cu and Zn are essential algal micronutrients, cofactors in numerous biochemical processes. The availability of a nutrient or toxic substance can be significantly affected by precipitation. Methods for modeling the effects of adsorption–desorption reactions have been previously reviewed. Useful predictions of algal response require an understanding of the relative importance of these interactions (both magnitude and time dependence). Photoreduction and dissolution of Mn oxides by dissolved humic substances has been proposed as an important factor regulating dissolved Mn distribution in seawater. Photodegradation of iron (Fe) chelates also enhances Fe uptake by algae. Anderson et al. observed that Fe uptake by Thalassiosira weissflogii in a chemically defined medium dominated by FeEDTA complexation doubled in the presence of light.

Book chapter↗

Implications for eruptive processes as indicated by sulfur dioxide emissions from Kilauea Volcano, Hawai'i, 1979-1997

Kı̄lauea Volcano, Hawai‘i, currently hosts the longest running SO 2 emission-rate data set on the planet, starting with initial surveys done in 1975 by Stoiber and his colleagues. The 17.5-year record of summit emissions, starting in 1979, shows the effects of summit and east rift eruptive processes, which define seven distinctly different periods of SO 2 release. Summit emissions jumped nearly 40% with the onset (3 January 1983) of the Pu`u `Ō`ō-Kūpaianaha eruption on the east rift zone (ERZ). Summit SO 2 emissions from Kı̄lauea showed a strong positive correlation with short-period, shallow, caldera events, rather than with long-period seismicity as in more silicious systems. This correlation suggests a maturation process in the summit magma-transport system from 1986 through 1993. During a steady-state throughput-equilibrium interval of the summit magma reservoir, integration of summit-caldera and ERZ SO 2 emissions reveals an undegassed volume rate of effusion of 2.1×10 5 m 3 /d. This value corroborates the volume-rate determined by geophysical methods, demonstrating that, for Kı̄lauea, SO 2 emission rates can be used to monitor effusion rate, supporting and supplementing other, more established geophysical methods. For the 17.5 years of continuous emission rate records at Kı̄lauea, the volcano has released 9.7×10 6 t (metric tonnes) of SO 2 , 1.7×10 6 t from the summit and 8.0×10 6 t from the east rift zone. On an annual basis, the average SO 2 release from Kı̄lauea is 4.6×10 5 t/y, compared to the global annual volcanic emission rate of 1.2×10 7 t/y.

Journal of Volcanology and Geothermal Research↗

Atmospheric processing of iron-bearing mineral dust aerosol and its effect on growth of a marine diatom, Cyclotella meneghiniana

Iron (Fe) is a growth-limiting micronutrient for phytoplankton in major areas of oceans and deposited wind-blown desert dust is a primary Fe source to these regions. Simulated atmospheric processing of four mineral dust proxies and two natural dust samples followed by subsequent growth studies of the marine planktic diatom Cyclotella meneghiniana in artificial sea-water (ASW) demonstrated higher growth response to ilmenite (FeTiO 3 ) and hematite (α-Fe 2 O 3 ) mixed with TiO 2 than hematite alone. The processed dust treatment enhanced diatom growth owing to dissolved Fe (DFe) content. The fresh dust-treated cultures demonstrated growth enhancements without adding such dissolved Fe. These significant growth enhancements and dissolved Fe measurements indicated that diatoms acquire Fe from solid particles. When diatoms were physically separated from mineral dust particles, the growth responses become smaller. The post-mineralogy analysis of mineral dust proxies added to ASW showed a diatom-induced increased formation of goethite, where the amount of goethite formed correlated with observed enhanced growth. The current work suggests that ocean primary productivity may not only depend on dissolved Fe but also on suspended solid Fe particles and their mineralogy. Further, the diatom C. meneghiniana benefits more from mineral dust particles in direct contact with cells than from physically impeded particles, suggesting the possibility for alternate Fe-acquisition mechanism/s.

Environmental Science & Technology↗

Food, beverage, and feedstock processing facility wastewater: A unique and underappreciated source of contaminants to U.S. streams

Process wastewaters from food, beverage, and feedstock facilities, although regulated, are an under-investigated environmental contaminant source. Food process wastewaters (FPWWs) from 23 facilities in 17 U.S. states were sampled and documented for a plethora of chemical and microbial contaminants. Of the 576 analyzed organics, 184 (32%) were detected at least once, with concentrations as large as 143 μg L –1 (6:2 fluorotelomer sulfonic acid), and as many as 47 were detected in a single FPWW sample. Cumulative per/polyfluoroalkyl substance concentrations up to 185 μg L –1 and large pesticide transformation product concentrations (e.g., methomyl oxime, 40 μg L –1 ; clothianidin TMG, 2.02 μg L –1 ) were observed. Despite 48% of FPWW undergoing disinfection treatment prior to discharge, bacteria resistant to third-generation antibiotics were found in each facility type, and multiple bacterial groups were detected in all samples, including total coliforms. The exposure–activity ratios and toxicity quotients exceeded 1.0 in 13 and 22% of samples, respectively, indicating potential biological effects and toxicity to vertebrates and invertebrates associated with the discharge of FPWW. Organic contaminant profiles of FPWW differed from previously reported contaminant profiles of municipal effluents and urban storm water, indicating that FPWW is another important source of chemical and microbial contaminant mixtures discharged into receiving surface waters.

Alabama, Arkansas, California, Idaho, Illinois, Io↗

In-reservoir physical processes modulate aqueous and biological methylmercury export from a seasonally anoxic reservoir

Anoxic conditions within reservoirs related to thermal stratification and oxygen depletion lead to methylmercury (MeHg) production, a key process governing the uptake of mercury in aquatic food webs. Once formed within a reservoir, the timing and magnitude of the biological uptake of MeHg and the relative importance of MeHg export in water versus biological compartments remain poorly understood. We examined the relations between the reservoir stratification state, anoxia, and the concentrations and export loads of MeHg in aqueous and biological compartments at the outflow locations of two reservoirs of the Hells Canyon Complex (Snake River, Idaho-Oregon). Results show that (1) MeHg concentrations in filter-passing water, zooplankton, suspended particles, and detritus increased in response to reservoir destratification; (2) zooplankton MeHg strongly correlated with MeHg in filter-passing water during destratification; (3) reservoir anoxia appeared to be a key control on MeHg export; and (4) biological MeHg, primarily in zooplankton, accounted for only 5% of total MeHg export from the reservoirs (the remainder being aqueous compartments). These results improve our understanding of the role of biological incorporation of MeHg and the subsequent downstream release from seasonally stratified reservoirs and demonstrate that in-reservoir physical processes strongly influence MeHg incorporation at the base of the aquatic food web.

Idaho, Oregon↗

Bioaccumulation and transfer of per- and polyfluoroalkyl substances (PFAS) in a stream and riparian food web contaminated by food processing wastewater

We evaluated the bioaccumulation and transfer of per- and polyfluoroalkyl substances (PFAS) in a stream food web contaminated by a food processing facility. Abiotic (i.e., water, sediment, and foam) and biotic (i.e., algae, aquatic insect larvae and adults, fish, and riparian spiders) matrices were sampled upstream and downstream of the facility’s wastewater outfall. Compared with upstream, PFAS concentrations were 600-fold higher in downstream water (mean ∑ 40 PFAS 3.67 ng mL –1 ± 0.48 (standard error)) and reflected inputs from the outfall, with 6:2 fluorotelomer sulfonate (6:2 FTS) dominating the PFAS profile. Within the aquatic food web, perfluorooctanesulfonate (PFOS) was the most biomagnified, and 6:2 FTS was the most biodiluted. In contrast, insect-mediated transfer of PFAS to riparian spiders showed trophic enrichment of 6:2 FTS and dilution of PFOS. We observed significant positive associations between phospholipid membrane-water partition coefficient (log K MW ) and perfluoroalkyl carboxylate (PFCA) chain length on bioaccumulation across most biological matrices, demonstrating that these chemical parameters are predictive of PFAS bioaccumulation potential in the field. Our research reveals important differences in aquatic versus terrestrial exposure for certain PFAS and that biological processes (e.g., trophic interactions and metamorphosis) and chemical properties (e.g., chain length, log K MW , and concentration) control PFAS uptake, bioaccumulation, and transfer in linked freshwater and terrestrial ecosystems.

Environmental Science & Technology↗

Polychlorinated biphenyls as probes of biogeochemical processes in rivers

A field study was conducted to investigate the use of PCB (polychlorinated biphenyl) congener and homolog assemblages as tracers of biogeochemical processes in the Milwaukee and Manitowoc Rivers in southeastern Wisconsin from 1993 to 1995. PCB congeners in the dissolved and suspended particle phases, along with various algal indicators (algal carbon and pigments), were quantitated in the water seasonally. In addition, PCB congener assemblages were determined seasonally in surficial bed sediments. Biogeochemical processes investigated included: determination of the source of suspended particles and bottom sediments by comparison with known Aroclor mixtures, water-solid partitioning, and algal uptake of PCBs. Seasonal differences among the PCB assemblages were observed mainly in the dissolved phase, somewhat less in the suspended particulate phase, and not at all in the bed sediments.

Wisconsin↗

Processes of nickel and cobalt uptake by a manganese oxide forming sediment in Pinal Creek, Globe mining district, Arizona

A series of column experiments was conducted using manganese oxide coated sediments collected from the hyporheic zone in Pinal Creek (AZ), a metal-contaminated stream, to study the uptake and retention of Mn, Ni, and Co. Experimental variables included the absence (abiotic) and presence (biotic) of active Mn-oxidizing bacteria, the absence and presence of dissolved Mn, and sediment manganese oxide content. Uptake of Mn under biotic conditions was between 8 and 39% higher than under abiotic conditions. Continuous uptake of Mn due to biotic oxidation was evident from extraction of column sediments. Manganese uptake is hypothesized to initially occur as adsorption, which led to subsequent surface and/or microbial oxidation. Complete breakthrough of Ni within 100 pore volumes indicated no process of continuous uptake and was modeled as an equilibrium adsorption process. Nickel uptake in the presence of dissolved Mn was 67-100% reversible. Sediment extractions suggest that Ni uptake occurred through weak and strong adsorption. Continuous uptake of cobalt increased with sediment manganese oxide content, and Co uptake was up to 75% greater under biotic than abiotic conditions. Cobalt uptake was controlled by both existing and newly formed manganese oxides. Only a small amount of Co uptake was reversible (10-25%). XANES spectral analysis indicated that most Co(II) was oxidized to Co(III) and probably incorporated structurally into manganese oxides. Although manganese oxides were the primary phase controlling uptake and retention of Mn, Ni, and Co, the mechanisms varied among the metals.

Arizona↗

Persistence of pathogenic prion protein during simulated wastewater treatment processes

Transmissible spongiform encephalopathies (TSEs, prion diseases) are a class of fatal neurodegenerative diseases affecting a variety of mammalian species including humans. A misfolded form of the prion protein (PrP TSE) is the major, if not sole, component of the infectious agent. Prions are highly resistant to degradation and to many disinfection procedures suggesting that, if prions enter wastewater treatment systems through sewers and/or septic systems (e.g., from slaughterhouses, necropsy laboratories, rural meat processors, private game dressing) or through leachate from landfills that have received TSE-contaminated material, prions could survive conventional wastewater treatment Here, we report the results of experiments examining the partitioning and persistence of PrPTSE during simulated wastewater treatment processes including activated and mesophilic anaerobic sludge digestion. Incubation with activated sludge did not result in significant PrPTSE degradation. PrPTSE and prion infectivity partitioned strongly to activated sludge solids and are expected to enter biosolids treatment processes. A large fraction of PrPTSE survived simulated mesophilic anaerobic sludge digestion. The small reduction in recoverable PrPTSE after 20-d anaerobic sludge digestion appeared attributable to a combination of declining extractability with time and microbial degradation. Our results suggest that if prions were to enter municipal wastewater treatment systems, most would partition to activated sludge solids, survive mesophilic anaerobic digestion, and be present in treated biosolids. ?? 2008 American Chemical Society.

Environmental Science & Technology↗

Processes affecting the fate of monoaromatic hydrocarbons in an aquifer contaminated by crude oil

Crude oil spilled from a subsurface pipeline in north-central Minnesota has dissolved in the groundwater, resulting in the formation of a plume of aliphatic, aromatic, and alicyclic hydrocarbons. Comparison of paired oil and groundwater samples collected along the central axis of the residual oil body shows that the trailing edge of the oil is depleted in the more soluble aromatic hydrocarbons (e.g., benzene, toluene, etc.) when compared with the leading edge. At the same time, concentrations of monoaromatic hydrocarbons in groundwater beneath the oil increase as the water moves toward the leading edge of the oil. Immediately downgradient from the leading edge of the oil body, certain aromatic hydrocarbons (e.g., benzene) are found at concentrations near those expected of a system at equilibrium, and the concentrations exhibit little variation over time (???8-20%). Other compounds (e.g., toluene) appear to be undersaturated, and their concentrations show considerably more temporal variation (???20-130%). The former are persistent within the anoxic zone downgradient from the oil, whereas concentrations of the latter decrease rapidly. Together, these observations suggest that the volatile hydrocarbon composition of the anoxic groundwater near the oil body is controlled by a balance between dissolution and removal rates with only the most persistent compounds reaching saturation. Examination of the distributions of homologous series and isomeric assemblages of alkylbenzenes reveals that microbial degradation is the dominant process controlling the fate of these compounds once groundwater moves away from the oil. For all but the most persistent compounds, the distal boundary of the plume at the water table extends no more than 10-15 m down-gradient from the oxic/anoxic transition zone. Thus, transport of the monoaromatic hydrocarbons is limited by redox conditions that are tightly coupled to biological degradation processes.

Environmental Science & Technology↗

Integrating hydrologic and geophysical data to constrain coastal surficial aquifer processes at multiple spatial and temporal scales

Since 1997, repeated, coincident geophysical surveys and extensive hydrologic studies in shallow monitoring wells have been used to study static and dynamic processes associated with surface water-groundwater interaction at a range of spatial scales at the estuarine and ocean boundaries of an undeveloped, permeable barrier island in the Georgia part of the U.S. South Atlantic Bight. Because geophysical and hydrologic data measure different parameters, at different resolution and precision, and over vastly different spatial scales, reconciling the coincident data or even combining complementary inversion, hydrogeochemcial analyses and well-based groundwater monitoring, and, in some cases, limited vegetation mapping to demonstrate the utility of an integrative, multidisciplinary approach for elucidating groundwater processes at spatial scales (tens to thousands of meters) that are often difficult to capture with traditional hydrologic approaches. The case studies highlight regional aquifer characteristics, varying degrees of lateral saltwater intrusion at estuarine boundaries, complex subsurface salinity gradients at the ocean boundary, and imaging of submarsh groundwater discharge and possible free convection in the pore waters of a clastic marsh. This study also documents the use of geophysical techniques for detecting temporal changes in groundwater salinity regimes under natural (not forced) gradients at intratidal to interannual (1998-200 Southeastern U.S.A. drought) time scales.

Book chapter↗

Sources, transformations, and hydrological processes that control stream nitrate and dissolved organic matter concentrations during snowmelt in an upland forest

We explored catchment processes that control stream nutrient concentrations at an upland forest in northeastern Vermont, USA, where inputs of nitrogen via atmospheric deposition are among the highest in the nation and affect ecosystem functioning. We traced sources of water, nitrate, and dissolved organic matter (DOM) using stream water samples collected at high frequency during spring snowmelt. Hydrochemistry, isotopic tracers, and end‐member mixing analyses suggested the timing, sources, and source areas from which water and nutrients entered the stream. Although stream‐dissolved organic carbon (DOC) and dissolved organic nitrogen (DON) both originated from leaching of soluble organic matter, flushing responses between these two DOM components varied because of dynamic shifts of hydrological flow paths and sources that supply the highest concentrations of DOC and DON. High concentrations of stream water nitrate originated from atmospheric sources as well as nitrified sources from catchment soils. We detected nitrification in surficial soils during late snowmelt which affected the nitrate supply that was available to be transported to streams. However, isotopic tracers showed that the majority of nitrate in upslope surficial soil waters after the onset of snowmelt originated from atmospheric sources. A fraction of the atmospheric nitrogen was directly delivered to the stream, and this finding highlights the importance of quick flow pathways during snowmelt events. These findings indicate that interactions among sources, transformations, and hydrologic transport processes must be deciphered to understand why concentrations vary over time and over space as well as to elucidate the direct effects of human activities on nutrient dynamics in upland forest streams.

Water Resources Research↗