SEARCH · USGS Science

Results for “Open Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25Linked to original sources

USGS2020

Calibration of the U.S. Geological Survey National Crustal Model

The U.S. Geological Survey National Crustal Model (NCM) is being developed to include spatially varying estimates of site response in seismic hazard assessments. Primary outputs of the NCM are continuous velocity and density profiles from the Earth’s surface to the mantle transition zone at 410-kilometer (km) depth for each location on a 1-km grid across the conterminous United States. Datasets used to produce the NCM may have a resolution of better than 1 km near the Earth’s surface in some regions, but, with increasing depth, NCM resolution decreases to tens to hundreds of kilometers in the mantle. Basic subsurface information is provided by the NCM geologic framework, thermal model, and petrologic and mineral physics database. In this report, the velocities and densities that can be extracted from the NCM are calibrated through the development of a porosity model based on Biot-Gassmann theory and more than 2,000 compressional- and (or) shear-wave velocity profiles less than 10 km deep from across the conterminous United States and southwestern Canada. Sediment and rock porosities are derived from shear-wave velocity and are found to depend on effective pressure, rock type, and age (for sedimentary and extrusive volcanic deposits). Porosity-effective pressure functions are then estimated for each rock type (and age for sedimentary and extrusive volcanic deposits). Unconsolidated sediments are found to have higher porosities than consolidated units, which have higher porosities than unweathered igneous units; young sedimentary units (for example, Quaternary age units) tend to have higher porosities than older sedimentary units (for example, pre-Cenozoic age units); porosity decreases with increasing effective pressure; and porosities can decrease quickly through the weathered layer of intrusive rocks. Comparing two Los Angeles area velocity models and the U.S. Geological Survey Bay Area velocity model with the NCM, the NCM does a better job on average of reproducing observed shear-wave velocities below 1 km per second because it has less bias and uncertainty. Approaching and above 1 km per second, the NCM tends to underpredict observed shear-wave velocity. Whereas several factors could contribute to this, the primary factor is probably bias in the NCM geologic framework. For example, the NCM will predict lower velocities in places where the depth to bedrock and basement appear shallower in the measured velocity profiles than specified in the NCM geologic framework. With regard to observed compressional-wave velocity and density, the NCM has significantly less bias than California models for the former, especially below 2 km per second, and all models tend to overpredict density for densities less than about 2,200 kilograms per cubic meter.

Open-File Report↗

USGS2007

Preliminary physical stratigraphy and geophysical data of the USGS Hope Plantation core (BE-110), Bertie County, North Carolina

In March and April, 2004, the U.S. Geological Survey (USGS), in cooperation with the North Carolina Geological Survey (NCGS) and the Raleigh Water Resources Discipline (WRD), drilled a stratigraphic test hole and well in Bertie County, North Carolina (fig. 1). The Hope Plantation test hole (BE-110-2004) was cored on the property of Hope Plantation near Windsor, North Carolina. The drill site is located on the Republican 7.5 minute quadradrangle at lat 36?01'58'N., long 78?01'09'W. (decimal degrees 36.0329 and 77.0192) (fig. 2). The altitude of the site is 48 ft above mean sea level as determined by Paulin Precise altimeter. This test hole was continuously cored by Eugene F. Cobbs, III and Kevin C. McKinney (USGS) to a total depth of 1094.5 ft. Later, a ground water observation well was installed with a screened interval between 315-329 feet below land surface (fig. 3). Upper Triassic, Lower Cretaceous, Upper Cretaceous, Tertiary, and Quaternary sediments were recovered from the site. The core is stored at the NCGS Coastal Plain core storage facility in Raleigh, North Carolina. In this report, we provide the initial lithostratigraphic summary recorded at the drill site along with site core photographs, data from the geophysical logger, calcareous nannofossil biostratigraphic correlations (Table 1) and initial hydrogeologic interpretations. The lithostratigraphy from this core can be compared to previous investigations of the Elizabethtown corehole, near Elizabethtown, North Carolina in Bladen County (Self-Trail, Wrege, and others, 2004), the Kure Beach corehole, near Wilmington, North Carolina in New Hanover County (Self-Trail, Prowell, and Christopher, 2004), the Esso #1, Esso #2, Mobil #1 and Mobil #2 cores in the Albermarle and Pamlico Sounds (Zarra, 1989), and the Cape Fear River outcrops in Bladen County (Farrell, 1998; Farrell and others, 2001). This core is the third in a series of planned benchmark coreholes that will be used to elucidate the physical stratigraphy, facies, thickness, and hydrogeology of the Tertiary and Cretaceous Coastal Plain sediments of North Carolina.

North Carolina↗

USGS1982

Preliminary appraisal of gravity and magnetic data at Syncline Ridge, western Yucca Flat, Nevada Test Site, Nye County, Nevada

A gravity and magnetic study of the Syncline Ridge area was conducted as part of an investigation of argillite rocks of the Eleana Formation under consideration as a medium for the possible storage of high-level radioactive waste. Bouguer gravity anomaly data, viewed in light of densities obtained by gamma-gamma logs and previous work of D. L. Healey (1968), delineate two regions of steep negative gradient where Cenozoic rocks and sediments are inferred to abruptly thicken: (1) the western third of the study area where Tertiary volcanic rocks are extensively exposed and (2) the northeast corner of the area where Quaternary alluvium is exposed and where volcanic rocks are inferred to occur at depth. In the remainder of the area, a region extending contiguously from Mine Mountain northwestward through Syncline Ridge to the Eleana Range, the gravity data indicate that the Eleana Formation, where not exposed, is buried at depths of less than about 200 m, except in a limited area of exposed older Paleozoic rocks on Mine Mountain. Quaternary alluvium and Tertiary volcanic rocks are inferred to occur in this region as veneers or shallow dishes of deposit on Tippipah Limestone or Eleana Formation. Low-level aeromagnetic anomaly data, covering the western two-thirds of the study area, delineate relatively magnetic tuff units within the Tertiary volcanic rocks and provide a very attractive means for distinguishing units of normal polarization from units of reversed polarization. If used in conjunction with results of previous magnetization studies of G. D. Bath (1968), the low-level survey may prove to be an effective tool for mapping specific tuff members in the volcanic terrane. The important question of the feasibility of discriminating high-quartz argillite from low-quartz argillite of the Eleana Formation using surface gravity data remains unresolved. If the more highly competent, denser, high-quartz phase should occur as stratigraphic units many tens of meters thick, closely spaced gravity data may reliably detect these units. If the high-quartz phase occurs only as relatively thin units, interbedded with low-quartz phase, borehole gravity surveying can be used much more effectively than equivalent surface gravity surveying.

Nevada↗

USGS1981

Description and preliminary interpretation of core CL-80-1, Clear Lake, Lake County, California

Coring operations were conducted in the west basin of Clear Lake during July and August 1980 to produce a regional Quaternary reference section. A 177-m-long core (CL-80-1) was taken, which also augments and extends a previous study of eight shorter cores collected from Clear Lake in 1973. Core CL-80-1 was continuously cored in 7.5 m of water, and 66.5 percent recovery was achieved. The sediments are composed primarily of clayey and silty sapropelic mud similar to those presently being deposited in the lake, and are interbedded with local coarse sand and gravel deposits and thin volcanic ash beds. Coring was terminated when coarse rounded gravel and cobbles of Franciscan assemblage lithology were encountered. The location of core CL-80-1 is between two other core sites of the 1973 series of cores, one of which (CL-73-4) is 115 m long and contains a well-defined, uninterrupted pollen and physical stratigraphic record from the present to about 130,000 years ago. Paleomagnetic and preliminary pollen analyses of core CL-80-1 are complete and comparison of these results with those of core CL-73-4 suggest that the new core represents a record from the present to about 175,000 years ago.

California↗

USGS2012

Genesis of the Touissit-Bou Beker Mississippi Valley-type district (Morocco-Algeria) and its relation to the Africa-Europe collision

The Mississippi Valley-type deposits of the Touissit-Bou Beker district are hosted by a 25 m thick sequence of diagenetically and hydrothermally dolomitized carbonate platform rocks of Aalenian-Bajocian age. The sulfide mineralization consists principally of galena and sphalerite and occurs as open-space fillings of voids and moderate to massive replacement of the medium- to coarse-grained host dolostone. Five types of dolomite have been distinguished, two of which (D 1 and D 2 ) are of replacement origin, whereas HD 1 , HD 2 , HD 3 occurring as open-space filling are of hydrothermal affiliation. Main ore controls include stratigraphy and lithology, carbonate dissolution, paleogeography, faults or faulted rocks, and availability of organic matter. Fluid inclusion data, along with Na-Cl-Br leachate, indicate that the ore-forming fluids correspond to evolved NaCl-CaCl 2 -KCl-MgCl 2 basin-derived hot (100° ± 20°C) saline brines (>20 wt % NaCl equiv) that acquired their high salinities and Ca/Na ratios through evaporation of seawater, and subsequent dolomitization and fluid-rock interactions. Stable isotope data for replacement and hydrothermal dolomites are tightly clustered and overlapping, with δ 18 O and δ 13 C values from 20.5 to 21.2 and 0.2 to 0.7&permil;, respectively. Similarly, sulfides yield δ 34 S values between 11.2 and 1.9&permil;, whereas those corresponding to the nearby Triassic gypsum cluster yield around 14&permil;. Altogether, these isotopic compositions are consistent with a basinal-type fluid with reduced sulfur very likely being derived through thermochemical reduction of dissolved sulfate, resulting in metal precipitation, and carbon of mainly marine Aalenian-Bajocian carbonate origin with a minor biogenic component. 87 Sr/ 86 Sr values of replacement dolostone are similar to those of ore-related hydrothermal dolomites, ranging from 0.70746 to 0.70833 and from 0.70769 to 0.70828, respectively, and are different from those of the Visean rhyodacite (0.71849–0.72167). Lead isotope ratios ( 206 Pb/ 204 Pb = 18.319–18.390; 207 Pb/ 204 Pb = 15.620–15.680; 208 Pb/ 204 Pb = 38.452–38.650) of sulfides are consistent with Pb being derived from the Visean rhyodacite and associated volcaniclastic rocks. The intimate link between faults and mineralization suggests the strong possibility of brine flow along both ENE-trending regional-scale faults and NW-SW-trending local-scale faults. The data suggest that MVT mineralization was emplaced during the late Neogene-Quaternary (i.e., ca. 15–0 Ma), possibly as a result of subsurface gravity-driven fluid flow in response to the collision between the African and Eurasian plates.

Touissit-bou Beker District↗

USGS2002

Early Holocene change in atmospheric circulation in the Northern Great Plains: An upstream view of the 8.2 ka cold event

Elk Lake, in northwestern Minnesota, contains numerous proxy records of climatic and environmental change contained in varved sediments with annual resolution for the last 10,000 years. These proxies show that about 8200 calendar years ago (8.2 cal. ka; 7300 radiocarbon years) Elk Lake went from a well-stratified lake that was wind-protected in a boreal forest to a well-mixed lake in open prairie savanna receiving northwesterly wind-blown dust, probably from the dry floor of Lake Agassiz. This change in climate marks the initiation of the widely recognized mid-Holocene “altithermal” in central North America. The coincidence of this change with the so-called 8.2 cal. ka cold event, recognized in ice-core and other records from the circum-North Atlantic, and thought by some to be caused by catastrophic discharge of freshwater from proglacial lakes Agassiz and Ojibway, suggests that the two “events” might be related. Our interpretation of the Elk Lake proxy records, and of other records from less accurately dated sites, suggests that change in climate over North America was the result of a fundamental change in atmospheric circulation in response to marked changes in the relative proportions of land, water, and, especially, glacial ice in North America during the early Holocene. This change in circulation probably post-dates the final drainage of proglacial lakes along the southern margin of the Laurentide ice sheet, and may have produced a minor perturbation in climate over Greenland that resulted in a brief cold pulse detected in ice cores.

Minnesota↗

USGS2003

Geologic map and digital database of the Redlands 7.5' quadrangle, San Bernardino and Riverside Counties, California

This geologic database of the Redlands 7.5' quadrangle was prepared by the Southern California Areal Mapping Project (SCAMP), a regional geologic-mapping project sponsored jointly by the U.S. Geological Survey and the California Geological Survey. The database was developed as a contribution to the National Cooperative Geologic Mapping Program's National Geologic Map Database, and is intended to provide a general geologic setting of the Redlands quadrangle. The database and map provide information about earth materials and geologic structures, including faults and folds that have developed in the quadrangle due to complexities in the San Andreas Fault system. The Redlands 7.5' quadrangle contains earth materials and structures that provide insight into the late Cenozoic geologic evolution of the southern California Inland Empire region. Important stratigraphic and structural elements include (1) the modern trace of the San Andreas and San Jacinto faults and (2) late Tertiary and Quaternary sedimentary materials and geologic structures that formed during the last million years or so and that record complex geologic interactions within the San Andreas Fault system. These materials and the structures that deform them provide the geologic framework for investigations of earthquake hazards and ground-water recharge and subsurface flow. Geologic information contained in the Redlands database is general-purpose data that is applicable to land-related investigations in the earth and biological sciences. The term "general-purpose" means that all geologic-feature classes have minimal information content adequate to characterize their general geologic characteristics and to interpret their general geologic history. However, no single feature class has enough information to definitively characterize its properties and origin. For this reason the database cannot be used for site-specific geologic evaluations, although it can be used to plan and guide investigations at the site-specific level. This summary pamphlet discusses major categories of surficial materials in the Redlands quadrangle, and provides a conceptual framework and basis for how geologicmap units containing such materials are recognized and correlated.

California↗

USGS1969

An analysis of gravity data in Area 12, Nevada Test Site

The gravity data available from Healey and Miller (1963a) were augmented by new observations along three profiles through two new drill holes in Area 12; UEI2t #1 and UEI2p #1. The data were interpreted to allow evaluation of the geologic structure prior to the planning and excavation of two proposed tunnel complexes, Ul2t and Ul2p. Density values for each of six rock units were determined to allow a two-dimensional analysis of the gravity data along the above-mentioned profiles. The surficial rocks of Quaternary and Tertiary age and the Tertiary volcanic rocks have a weighted average density of 1.86 gm/cc. The density of the caprock at Rainier and Aqueduct Mesas ranges from 2.17 gm/cc at UEI2p #1 to 2.27 gm/cc at UEI2t #1. The Gold Meadows stock and the associated Precambrian quartzite have an arithmetic average density of 2.60 gm/cc for all samples measured. The middle Paleozoic dolomite in Area 12 has an arithmetic average density of 2.75 gm/cc. The clastic rocks of Paleozoic age have an arithmetic average density of 2.60 gm/cc. Interpretation of the residual gravity data indicates a maximum thickness of about 2,800 feet for all Tertiary volcanic rocks. A normal fault striking N. 30 ? E. disrupts the pre-Cenozoic surface at UEI2p #1 and 0.4 mile east of UEI2t #1. The throw within rock of Paleozoic age is about 400-500 feet. Another normal fault that strikes about N. 20 ? E. is located about 1.5 miles east of UEI2p #1. The throw of this fault is at least 1,100 feet in rocks of pre-Cenozoic age. Elevation contours representing the pre-Cenozoic surface in Area 12 show a maximum relief of about 2,000 feet.

Nevada↗

USGS2000

Geophysical constraints on the Virgin River Depression, Nevada, Utah, and Arizona

Gravity and aeromagnetic data provide insights into the subsurface lithology and structure of the Virgin River Depression (VRD) of Nevada, Utah, and Arizona. The gravity data indicate that the Quaternary and Tertiary sedimentary deposits hide a complex pre-Cenozoic surface. A north-northwest-trending basement ridge separates the Mesquite and Mormon basins, as evidenced by seismic-reflection, gravity, and aeromagnetic data. The Mesquite basin is very deep, reaching depths of 8?10 km. The Mormon basin reaches thicknesses of 5 km. Its northern margin is very steep and may be characterized by right steps, although this interpretation could change with additional gravity stations. Most of the young (Quaternary), small-displacement faults trend within 10? of due north and occur within the deeper parts of the Mesquite basin north of the Virgin River. South of the Virgin River, only a few, young, small-displacement faults are mapped; the trend of these faults is more northeasterly and parallels the basement topography and is distinct from that of the faults to the north. The Virgin River appears to follow the margin of the basin as it emerges from the plateau. The high-resolution aeromagnetic data outline the extent of shallow volcanic rocks in the Mesquite basin. The north-northwest alignment of volcanic rocks east of Toquop Wash appear to be structurally controlled because of faults imaged on seismic-reflection profiles and because the alignment is nearly perpendicular to the direction of Cenozoic extension. More buried volcanics likely exist to the north and east of the high-resolution aeromagnetic survey. Broader aeromagnetic anomalies beneath pre-Cenozoic basement in the Mormon Mountains and Tule Springs Hills reflect either Precambrian basement or Tertiary intrusions. These rocks are probably barriers to groundwater flow, except where fractured.

Arizona, Nevada, Utah↗

USGS2006

Seismic constraints and Coulomb stress changes of a blind thrust fault system, 1: Coalinga and Kettleman Hills, California

This report reviews the seismicity and surface ruptures associated with the 1982-1985 earthquake sequence in the Coalinga region in California, and the role of Coulomb stress in triggering the mainshock sequence and aftershocks. The 1982-1985 New Idria, Coalinga, and Kettleman Hills earthquakes struck on a series of west-dipping, en echelon blind thrust faults. Each earthquake was accompanied by uplift of a Quaternary anticline atop the fault, and each was accompanied by a vigorous aftershock sequence. Aftershocks were widely dispersed, and are seen above and below the thrust fault, as well as along the up-dip and down-dip projection of the main thrust fault. For the Coalinga and Kettleman Hills earthquakes, high-angle reverse faults in the core of the anticlines are evident in seismic reflection profiles, and many of these faults are associated with small aftershocks. The shallowest aftershocks extended to within 3-4 km of the ground surface. There is no compelling evidence for aftershocks associated with flexural slip faulting. No secondary surface rupture was found on any of the anticlines. In contrast, the 1983 Nuñez rupture struck on a high-angle reverse fault 10 km west of the Coalinga epicenter, and over a 40-80-day period, up to 1 m of oblique surface slip occurred. The slip on this Holocene fault likely extended from the ground surface to a depth of 8-10 km. We argue that both the Nuñez and Kettleman earthquakes were triggered by stresses imparted by the Coalinga mainshock, which was the largest of the four events in the sequence.

California↗

USGS1979

Artificial-recharge investigation near Aurora, Nebraska: 2-year progress report

This report presents the results of the first 2 years of a 4-year investigation of potential for artificial recharge and recharge methods that might be used to mitigate excessive aquifer depletion in Nebraska. A Quaternary sand-and-gravel aquifer near Aurora, Nebr., was recharged by injecting water through a well at a rate of approximately 730 gallons per minute for nearly 6 months. Total recharge was 530 acre-feet. Recharge was intermittent during the first 2 months, but was virtually continuous during the last 4 months. Buildup of the water level in the recharge well was 17 feet. The rate of buildup indicates that the well could have accepted water by gravity flow at more than 3,000 gallons per minute for at least 1 year. The cause of a continuing slow rise in water levels in the recharge well in contrast to nearly stable water levels in observation wells as close as 10 feet from the recharge well is as yet uncertain. The recharge water and the native ground water appeared to be chemically compatible. Infiltration rates from 24-foot-diameter surface impoundments ranged from 0.04 to 0.66 feet per day. The higher rates may have resulted in part from leakage down incompletely sealed holes that were drilled to install monitoring equipment. The investigation, including a report on the entire project, is scheduled for completion by 1980.

Nebraska↗

USGS1981

Submarine topography and physiography of lower Cook Inlet, Alaska

The submarine topography of lower Cook Inlet, Alaska, is complex because the bathymetric aspects and water depths change rapidly over short distances. The folded upper Tertiary subbottom was eroded during the first of five major Quaternary glacial advances over the inlet, and later fluvial, fluvioglacial, glacial, and marine erosional and depositional processes shaped the bottom to its present configuration. Most of lower Cook Inlet has a relative smooth topography showing small local highs and lows, and slopes with gradients generally ranging from less than a degree to locally about 5°. Around the southwestern Kenai Peninsula and the Barren and Kodiak Islands, strong faulting with vertical movement has added to the complexity of bottom topography. Less complex, nonfaulted areas occur near Kalgin Island and south Kachemak Bay and around Augustine Island. To facilitate description of lower Cook Inlet the estuarine body is divided into three large regions, northern and central, southern, and eastern; and these regions are divided into smaller physiographic areas on the basis of submarine topographic characteristics and 20-m depth zonations. Each area is named by combining the geographic name of a nearby place or feature on land with a common term for a marine physiographic feature -- trough, platform, ramp, slope, plateau. Local highs and deeps having lees than 5-m relief, which can be important to fisheries and specific research or economic studies, are not named, mentioned in text, or shown on the figures.

Alaska↗

USGS1982

Availability and quality of water from the Dakota aquifer, northwest Iowa

The Dakota aquifer in northwest Iowa consists of sandstones in the Dakota Formation. It underlies most of the study area and is the most extensive source of ground water in the area. Individual sandstone beds are from less than 10 to more than 150 feet thick. The cumulative thickness of sandstone is more than 200 feet throughout much of the area. The aquifer is confined by overlying Cretaceous limestone and shale, Quaternary glacial deposits and loess. The underlying confining material is shale of the Dakota Formation, undifferentiated Paleozoic age rocks, or Precambrian crystalline rock. Water flows through the aquifer from the north-central part of the study area to the east, south and southwest. Recharge is dominantly by infiltration from the land surface through the confining materials. Discharge is to underlying Paleozoic aquifers and to the alluvium and glacial outwash deposits along the Missouri and Big Sioux Rivers in the southwest part of the area. Flow components toward bedrock valleys may reflect discharge to Quaternary sand and gravel deposits in these valleys. Pumping tests conducted in the study area indicate a narrow range of hydraulic conductivities of the Dakota aquifer, from 37 to 50 feet per day. Consequently, an average hydraulic conductivity of 40 feet per day was used to estimate the potential yield to wells completed in the aquifer. Yields of more than 250 gallons per minute can be expected throughout much of the study area and more than 1000 gallons per minute could be produced in some areas. The quality of water from the Dakota is a calcium, magnesium, sulfate type. It is generally suitable for irrigation purposes, based on comparisons of sodium adsorption ratios and electrical conductivities. In some areas the aquifer has water with high salinity hazard that may restrict its use to irrigation of only well drained types of soil. The concentration of radium226 and other radionuclides exceed recommended limits at several sites. The quality of water pumped from the aquifer may be altered by induced leakage from the underlying aquifers in Paleozoic age rocks if withdrawals reverse the pattern of natural flow from the Dakota into the Paleozoic aquifers. Evidence for such a reversal exists in the area around the city of LeMars.

Iowa↗

USGS1976

Submarine faults and slides that disrupt surficial sedimentary units, northern Gulf of Alaska

Faults and submarine slides or slumps of Quaternary age are potential environmental hazards on the outer continental shelf (OCS) of the northern Gulf of Alaska. Most of the faults that approach or reach the seafloor cut strata that may be equivalent to the upper Yakataga Formation (Pliocene-Pleistocene). Along several faults the seafloor is offset from 5 to 20 m. A few faults appear to cut Holocene sediments, but none of these show offset at the seafloor. Submarine slides or slumps have been found in two places in the OCS region: (1) seaward of the Malaspina Glacier and Icy Bay, an affected area of 1,770 km 2 with a slope of less than one-half degree, and (2) across the entire span of the Copper River prodelta, an area of 1,730 km 2 , having a slope of about one-half degree. Seismic profiles across these slide areas show disrupted reflectors and irregular topography commonly associated with submarine slides or slumps. Potential slide or slump areas have been delineated in areas of thick sediment accumulation and relatively steep slopes. These areas include (1) Kayak Trough, (2) parts of Hinchinbrook Entrance and Sea Valley, (3) parts of the outer shelf and upper slope between Kayak Island and Yakutat Bay and (4) Bering Trough.

Alaska↗

USGS2000

Preliminary maps of Quaternary deposits and liquefaction susceptibility, nine-county San Francisco Bay region, California: a digital database

This report presents a preliminary map and database of Quaternary deposits and liquefaction susceptibility for the nine-county San Francisco Bay region, together with a digital compendium of ground effects associated with past earthquakes in the region. The report consists of (1) a spatial database of fivedata layers (Quaternary deposits, quadrangle index, and three ground effects layers) and two text layers (a labels and leaders layer for Quaternary deposits and for ground effects), (2) two small-scale colored maps (Quaternary deposits and liquefaction susceptibility), (3) a text describing the Quaternary map, liquefaction interpretation, and the ground effects compendium, and (4) the databse description pamphlet. The nine counties surrounding San Francisco Bay straddle the San Andreas fault system, which exposes the region to serious earthquake hazard (Working Group on California Earthquake Probabilities, 1999). Much of the land adjacent to the Bay and the major rivers and streams is underlain by unconsolidated deposits that are particularly vulnerable to earthquake shaking and liquefaction of water-saturated granular sediment. This new map provides a modern and regionally consistent treatment of Quaternary surficial deposits that builds on the pioneering mapping of Helley and Lajoie (Helley and others, 1979) and such intervening work as Atwater (1982), Helley and others (1994), and Helley and Graymer (1997a and b). Like these earlier studies, the current mapping uses geomorphic expression, pedogenic soils, and inferred depositional environments to define and distinguish the map units. In contrast to the twelve map units of Helley and Lajoie, however, this new map uses a complex stratigraphy of some forty units, which permits a more realistic portrayal of the Quaternary depositional system. The two colored maps provide a regional summary of the new mapping at a scale of 1:275,000, a scale that is sufficient to show the general distribution and relationships of the map units but cannot distinguish the more detailed elements that are present in the database. The report is the product of years of cooperative work by the USGS National Earthquake Hazards Reduction Program (NEHRP) and National Cooperative Geologic Mapping Program, William Lettis and & Associates, Inc. (WLA) and, more recently, by the California Division of Mines and Geology as well. An earlier version was submitted to the Geological Survey by WLA as a final report for a NEHRP grant (Knudsen and others, 2000). The mapping has been carried out by WLA geologists under contract to the NEHRP Earthquake Program (Grants #14-08-0001-G2129, 1434-94-G-2499, 1434-HQ-97-GR-03121, and 99-HQ-GR-0095) and with other limited support from the County of Napa, and recently also by the California Division of Mines and Geology. The current map consists of this new mapping and revisions of previous USGS mapping.

Open-File Report↗

USGS2004

Geologic and bathymetric reconnaissance overview of the San Pedro shelf region, southern California

This report presents a series of maps that describe the bathymetry and late Quaternary geology of the San Pedro shelf area as interpreted from seismic-reflection profiles and 3.5-kHz and multibeam bathymetric data. Some of the seismic-reflection profiles were collected with Uniboom and 120-kJ sparker during surveys conducted by the U.S. Geological Survey (USGS) in 1973 (K-2-73-SC), 1978 (S-2-78-SC), and 1979 (S-2a-79-SC). The remaining seismic-reflection profiles were collected in 2000 using Geopulse boomer and minisparker during USGS cruise A-1-00-SC. The report consists of seven oversized sheets: 1. Map of 1978 and 1979 uniboom seismic-reflection and 3.5-kHz tracklines used to map faults and folds on San Pedro Shelf. 2. Maps of multibeam shaded bathymetric relief with faults and folds, and bathymetric contours. 3. Isopach map of unconsolidated sediment, seismic-reflection profile across the San Pedro shelf, seismic-reflection profile across San Gabriel paleo-valley. 4. Seismic-reflection profiles across the Palos Verdes Fault Zone. 5. Geologic map and samples of Uniboom and 120-kJ sparker seismic-reflection profiles used to make the map. 6. Map showing thickness of uppermost (Holocene?) sediment layer. 7. Map of San Gabriel Canyon paleo-valley and associated drainage basins.

California↗

USGS2019

Offshore shallow structure and sediment distribution, Point Sur to Point Arguello, central California

This publication consists of three map sheets that display shallow geologic structure, along with sediment distribution and thickness, for an about 225-km-long offshore section of the central California coast between Point Sur and Point Arguello. Each map sheet includes three maps, at scales of either 1:150,000 or 1:200,000, as well as a set of figures that contain representative high-resolution seismic-reflection profiles. The maps and seismic-reflection surveys cover most of the continental shelf in this region. In addition, the maps show the locations of the shelf break and the 3-nautical-mile limit of California’s State Waters. The seismic-reflection data, which are the primary dataset used to develop the maps, were collected to support the California Seafloor Mapping Program and U.S. Geological Survey Offshore Geologic Hazards projects. In addition to the three map sheets, this publication includes geographic information system data files of interpreted faults, folds, sediment thicknesses, and depths-to-base of sediment. The faults and folds shown on the maps have been locally simplified as appropriate for the map scales. The right-lateral San Gregorio–Hosgri Fault (SGHF) is the most significant structure in the map area. On a regional scale, the SGHF is part of a 400-km-long, right-lateral fault system that extends northwestward from Point Arguello to the area offshore of San Francisco, where it merges with the San Andreas Fault. From north to south in this part of central California, the SGHF lies offshore between the south flank of Point Sur and the north flank of Point Piedras Blancas, then comes onshore at Point Piedras Blancas, before heading offshore again between the south flank of Point Piedras Blancas and Point Arguello. Cumulative fault offset along the SGHF is as much as 150 to 160 km, decreasing to the south by transferring slip on to northwest-striking faults that converge with the SGHF both onland and offshore from the east. In the map area, the offshore-converging faults include the Los Osos Fault, the Shoreline–Point Buchon Fault, the Casmalia Fault, and the Lions Head Fault. Quaternary sediments and bedrock underlie the shelf. On the seismic-reflection profiles, we divide Quaternary shelf sediments into two units. Characterizing the younger, upper unit is a focus of this publication. This unit is inferred to have been deposited on the shelf in the last about 21,000 years during the sea-level rise that followed the last major lowstand and the Last Glacial Maximum (LGM). This upper unit overlies a transgressive surface of erosion, a commonly angular, wave-cut unconformity, and is generally characterized by low-amplitude, continuous to moderately continuous, diffuse, subparallel, generally flat reflections. Maps in this publication show both the thickness of this upper sediment unit and the depth to the base of the sediment unit. Within the map region, 11 different “domains” of post-LGM shelf sediment are delineated on the basis of sediment thickness and coastal geomorphology. Maximum sediment thickness is in the southern part of the region, offshore of the mouths of the Santa Ynez and Santa Maria Rivers. Minimum sediment thickness is found offshore of prominent rocky points, including Point Buchon and Piedras Blancas. Mean sediment thickness for the entire shelf in the map area between Point Sur and Point Arguello is 12.2 m, and total sediment volume is 24.7 million cubic meters.

California↗

USGS1973

Hydrology of the dunes area north of Coos Bay, Oregon

Hydrology of a 20-square-mile area of dunes along the central Oregon coast was studied. The area is underlain by 80 to 150 feet of Quaternary dune and marine sand which overlies Tertiary marine clay and shale. Ground water for industrial and municipal use is being withdrawn at a rate of 4 million gallons per day. Original plans to withdraw as much as 30 million gallons per day are evidently limited by the prospect of excessive lowering of levels in shallow lakes near the wells, and possibly sea-water intrusion, if water-level gradients are reversed. At the present stage of development there are 18 production wells, each capable of producing 200-300 gallons per minute from the lower part of the sand deposits. Except for thin layers of silt, clay, and organic matter, the deposits of sand are clean and uniform; horizontal permeability is two orders of magnitude times the vertical permeability. Because of the low vertical permeability, drawdown cones are not evident in the upper part of the aquifer adjacent to the wells. However, present pumping lowers general water levels in the lakes and the shallow ground-water zone as much as several feet. A two-layer electric analog model was built to analyze effects of present and projected development as well as any alternate plans. Model results were used to develop curves for short-term prediction of water levels.

Open-File Report↗