SEARCH · USGS Science

Results for “Northeastern Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25Linked to original sources

USGS1999

Vulnerability of ground water in the Tokio and Warwick aquifers to surface contamination, Fort Totten Indian Reservation, North Dakota

The vulnerability of ground water in the Tokio and Warwick aquifers to surface contamination was evaluated using existing hydrologic, climatic, geologic, topographic, and land-use/land-cover data and geographic information system procedures. The aquifers underlie parts of the Fort Totten Indian Reservation in northeastern North Dakota. The vulnerability was evaluated using vertical hydraulic leakance, depth to water, hydraulic conductivity, land use/land cover, land-surface slope, hydrologic sinks, and drainage basin areas. Data were discretized using a land-surface altitude grid divided into 50-foot-square cells. Vertical hydraulic leakance was determined by combining data from ring-permeameter and slug tests, land-use/land-cover data were obtained from data sets, and land-surface slope and hydrologic sinks were calculated from land-surface altitude data. The vulnerability of ground water in the Tokio and Warwick aquifers to surface contamination is high in terms of land use/land cover and land-surface slope. The land surface of the Warwick aquifer also has numerous hydrologic sinks that result in areas of increased vulnerability of ground water to surface contamination.

North Dakota↗

USGS1994

Geology of the Blue Mountains region of Oregon, Idaho, and Washington: Stratigraphy, physiography, and mineral resources of the Blue Mountains region

PART 1: Stratigraphic and sedimentological analysis of sedimentary sequences from the Wallowa terrane of northeastern Oregon has provided a unique insight into the paleogeography and depositional history of the terrane, as well as establishing important constraints on its tectonic evolution and accretionary history. Its Late Triassic history is considered here by examining the two most important sedimentary units in the Wallowa terrane-the Martin Bridge Limestone and the Hurwal Formation. Conformably overlying epiclastic volcanic rocks of the Seven Devils Group, the Martin Bridge Limestone comprises shallow-water platform carbonate rocks and deeper water, off-platform slope and basin facies. Regional stratigraphic and tectonic relations suggest that the Martin Bridge was deposited in a narrow, carbonate-dominated (forearc?) basin during a lull in volcanic activity. The northern Wallowa platform was a narrow, rimmed shelf delineated by carbonate sand shoals. Interior parts of the shelf were characterized by supratidal to shallow subtidal carbonates and evaporites, which were deposited in a restricted basin. In the southern Wallowa Mountains, lithofacies of the Martin Bridge are primarily carbonate turbidites and debris flow deposits, which accumulated on a carbonate slope apron adjacent to the northern Wallowa rimmed shelf from which they were derived. Drowning of the platform in the latest Triassic, coupled with a renewed influx of volcanically derived sediments, resulted in the progradation of fine-grained turbidites of the Hurwal Formation over the carbonate platform. Within the Hurwal, Norian conglomerates of the Excelsior Gulch unit contain exotic clasts of radiolarian chert, which were probably derived from the Bakei terrane. Such a provenance provides evidence of a tectonic link between the Baker and Wallowa terranes as early as the Late Triassic, and offers support for the theory that both terranes were part of a more extensive and complex Blue Mountains island-arc terrane. PART 2: Mesozoic rocks exposed along the Snake River in the northern Wallowa terrane represent a volcanic island and its associated sedimentary basins within the Blue Mountains island arc of Washington, Oregon, and Idaho. In the northern part of the Wallowa terrane, rock units include the Wild Sheep Creek, Doyle Creek, and Coon Hollow Formations, the (informal) Imnaha intrusion, and the (informal) Dry Creek stock. The volcanic rocks of the Ladinian to Karnian Wild Sheep Creek Formation show two stages of evolution-an early dacitic phase Gower volcanic faciesY and a late mafic phase (upper volcanic facies). The two volcanic facies are separated by eruption-generated turbidites of siliceous argillites and arkosic arenites (argillitesandstone facies). The two magmatic phases of the Wild Sheep Creek Formation may be recorded by the compositional zoning from older quartz diorite and diorite to younger gabbro in the Imnaha intrusion. Although the Late Triassic Imnaha intrusion is in fault contact with the Wild Sheep Creek Formation, it may be a subduction-related pluton and was the likely magma source for the Wild Sheep Creek Formation. Interbedded with the upper volcanic facies are eruption-generated turbidite and debris flow deposits (sandstone-breccia facies) and thick carbonate units (limestone facies). The limestone facies consists of two marker units, which may represent carbonate platform environments. Clast imbrication, fossil orientation, and cross-stratification in the Wild Sheep Creek Formation indicate a shoaling to subaerial volcanic island to the south and southeast; sediment was transported to the north and northwest. The Karnian Doyle Creek Formation consists largely of epiclastic conglomerate, sandstone, and shale that were deposited in welloxygenated basins. Vitric tuffs interbedded with these sediments suggest shallow or subaerial pyroclastic eruptions. Quartz diorite clasts in this formation may indicate uplift

Idaho, Oregon, Washington↗

USGS1995

Water resources of the Grand Portage Indian Reservation, northeastern Minnesota

The Grand Portage Indian Reservation Tribal Council needs information about the availability and quality of the ground water in the Reservation to develop, protect, and manage this resource for future use. The U.S. Geological Survey, in cooperation with the Grand Portage Indian Reservation Tribal Council, did a three-year study of the ground water in the Reservation to provide this needed information. This report presents the results of that study. Presently, ground water from bedrock is the principal source of supply for municipal, commercial, and residential water use. The bedrock aquifers are the (1) North Shore Volcanic Group basalt, (2) Keweenawan Volcanic and intrusive rocks, which are gabbro and diabase, and (3) Rove Formation argillite, slate, and graywacke. Sand and gravel aquifers are a small source of ground water. The storage coefficient of the bedrock aquifers was estimated to be 1 x 10 -4 , which is a small value typical of confined, fractured rock aquifers. The median estimate of transmissivity determined from data for 17 wells completed in bedrock was 20 feet squared per day; the range was from 3 to 500 feet squared per day. Reported yield of 19 wells completed in bedrock had a range of 1 to 100 gallons per minute and a median of 7 gallons per minute. The median yield of 11 wells completed in the North Shore Volcanic Group was 16 gallons per minute; the median yield of 8 wells completed in the Keweenawan Volcanic and intrusive rocks and Rove Formation was 4 gallons per minute. Geophysical logs and televiewer images of two wells completed in bedrock indicated the boreholes penetrated many fractures. Hydrofracturing of the two wells increased their yield from about 0.05 and 0.25 gallons per minute to about 1.5 and 1.2 gallons per minute, respectively. Although the estimated yield from the two wells was increased by 30 and by nearly 5 times after hydrofracturing, the well yield after hydrofracturing was still small. Water types determined from analyses of water from nine wells completed in bedrock were sodium-chloride, calcium-chloride, sodium-bicarbonate, and calcium-bicarbonate. Water from three wells had concentrations of dissolved solids (800 to 3,110 milligrams per liter) and dissolved chloride (410 to 1,600 milligrams per liter) that were higher than their respective Secondary Maximum Contaminant Levels of 500 and 250 milligrams per liter established by the U.S. Environmental Protection Agency. Water from two wells had concentrations of dissolved iron (1,600 and 1,300 micrograms per liter) that were higher than the Secondary Maximum Contaminant Level of 300 micrograms per liter. Water from an observation well located about 200 feet downgradient from an abandoned landfill and screened from 79 to 84 feet below land surface in a gravel aquifer had a trace amount of toluene (0.2 micrograms per liter). The presence of toluene suggested possible contamination.

Minnesota↗

USGS1963

Geology and ground-water resources of the Lake Dakota Plain area, South Dakota

The Lake Dakota plain area is a nearly flat surface that includes parts of Spink, Brown, Marshall, and Day Counties in northeastern South Dakota. Agriculture is the principal occupation. Because precipitation often is insufficient for maximum crop production, the U.S. Bureau of Reclamation has developed a plan for irrigation of the area. Most of the irrigation water would be conveyed by canal from a reservoir on the Missouri River, about 100 miles to the west, but some would be obtained locally from the James River. The surface of the Precambrian rocks, which underlie the area at a depth of 1,200 to 1,500 feet, is the lower limit to which water wells are drilled. Most of the producing wells in the area tap the Dakota sandstone, which has an average thickness of about 400 feet and rests on the Precambrian rocks. The Dakota is not recharged locally; water percolates into the Lake Dakota plain area principally from areas of recharge to the west. Because the aggregate discharge from wells tapping the Dakota exceeds the estimated rate of lateral percolation into the area, some of the discharged water probably is derived from storage. Although the artesian pressure is still sufficient to cause wells to flow, it is much less now than it was when the first wells were drilled in the 1880's. Water from the Dakota is highly mineralized; the specific conductance of water from 71 wells ranged from 2,590 to 4,380 micromhos per centimeter. Most of the water was of the sodium sulfate type and was soft. By recognized standards the water is chemically unsuitable for most uses, but for many years it has been the principal source of supply both on farms and in the municipalities. Use of the water for irrigation is reported to have made the soil unproductive. The Dakota is overlain by younger Cretaceous rocks aggregating 700 to 800 feet in thickness. These rocks, which consist of shale and limestone, generally are too nearly impermeable to be a source of water supply. Unconsolidated deposits of Quaternary age mantle the Cretaceous rocks. Although they consist mostly of material that is too fine grained to yield water freely to wells, the Quaternary deposits contain bodies of moderately to highly permeable material that yield water copiously. Such bodies may be located only by exploratory drilling or, possibly, geophysical methods. The water differs widely in amount of mineralization and in chemical composition; the specific conductance of water from 322 wells ranged from 246 to 13,300 micromhos per centimeter. In most of the report area the water is of unsuitable quality for irrigation and domestic use. The principal source of recharge to the Quaternary deposits is infiltrating precipitation. Evapotranspiration accounts for nearly all the water discharged; the amount of water discharging into stream channels and withdrawn from wells is almost negligible by comparison. Irrigation of the area would increase the rate of recharge to the Quaternary deposits and would cause the water table to rise. Probably it would also cause an increase in the concentration of dissolved minerals in much of the ground water. Artificial drainage would be necessary to prevent waterlogging of cropland.

South Dakota↗

USGS2024

Vulnerability assessment of groundwater influenced ecosystems in the Northeastern United States

Groundwater-influenced ecosystems (GIEs) are increasingly vulnerable due to groundwater extraction, land-use practices, and climate change. These ecosystems receive groundwater inflow as a portion of their baseflow or water budget, which can maintain water levels, water temperature, and chemistry necessary to sustain the biodiversity that they support. In some systems (e.g., springs, seeps, fens), this connection with groundwater is central to the system’s integrity and persistence. Groundwater management decisions for human use often do not consider the ecological effects of those actions on GIEs. This disparity can be attributed, in part, to a lack of information regarding the physical relationships these systems have with the surrounding landscape and climate, which may influence the environmental conditions and associated biodiversity. We estimate the vulnerability of areas predicted to be highly suitable for the presence of GIEs based on watershed (U.S. Geological Survey Hydrologic Unit Code 12 watersheds: 24–100 km 2 ) and pixel (30 m × 30 m pixels) resolution in the Atlantic Highlands and Mixed Wood Plains EPA Level II Ecoregions in the northeastern United States. We represent vulnerability with variables describing adaptive capacity (topographic wetness index, hydric soil, physiographic diversity), exposure (climatic niche), and sensitivity (aquatic barriers, proportion urbanized or agriculture). Vulnerability scores indicate that ~26% of GIEs were within 30 m of areas with moderate vulnerability. Within these GIEs, climate exposure is an important contributor to vulnerability of 40% of the areas, followed by land use (19%, agriculture or urbanized). There are few areas predicted to be suitable for GIEs that are also predicted to be highly vulnerable, and of those, climate exposure is the most important contributor to their vulnerability. Persistence of GIEs in the northeastern United States may be challenged as changes in the amount and timing of precipitation and increasing air temperatures attributed to climate change affect the groundwater that sustains these systems.

Connecticut, Delaware, District of Columbia, Maine↗

USGS2022

The Pondosa fault zone: A distributed dextral-normal-oblique fault system in northeastern California, USA

The tectonic domains of Basin and Range extension, Cascadia subduction zone contraction, and Walker Lane dextral transtension converge in the Mushroom Rock region of northeastern California, USA. We combined analysis of high-resolution topographic data, bedrock mapping, 40 Ar/ 39 Ar geochronology, low-temperature thermochronology, and existing geologic and fault mapping to characterize an extensive dextral-normal-oblique fault system called the Pondosa fault zone. This fault zone extends north-northwest from the Pit River east of Soldier Mountain, California, into moderately high-relief volcanic topography as far north as the Bartle (California) townsite with normal and dextral offset apparent in geomorphology and fault exposures. New and existing 40 Ar/ 39 Ar and radiocarbon dating of offset lava flows provides ages of 12.4 ka to 9.6 Ma for late Cenozoic stratigraphic units. Scarp morphology and geomorphic expression indicate that the fault system was active in the late Pleistocene. The Pondosa fault zone may represent a dextral-oblique accommodation zone between north-south–oriented Basin and Range extensional fault systems and/or part of the Sierra Nevada–Oregon Coast block microplate boundary.

California↗

USGS2005

Environmental impacts of oil production on soil, bedrock, and vegetation at the U.S. Geological Survey Osage-Skiatook Petroleum Environmental Research site A, Osage County, Oklahoma

The U.S. Geological Survey is investigating the impacts of oil and gas production on soils, groundwater, surface water, and ecosystems in the United States. Two sites in northeastern Oklahoma (sites A and B) are presently being investigated under the Osage–Skiatook Petroleum Environmental Research project. Oil wells on the lease surrounding site A in Osage County, Oklahoma, produced about 100,000 bbl of oil between 1913 and 1981. Prominent production features on the 1.5-ha (3.7-ac) site A include a tank battery, an oil-filled trench, pipelines, storage pits for both produced water and oil, and an old power unit. Site activities and historic releases have left open areas in the local oak forest adjacent to these features and a deeply eroded salt scar downslope from the pits that extends to nearby Skiatook Lake. The site is underlain by surficial sediments comprised of very fine-grained eolian sand and colluvium as much as 1.4 m (4.6 ft) thick, which, in turn, overlie flat-lying, fractured bedrock comprised of sandstone, clayey sandstone, mudstone, and shale. A geophysical survey of ground conductance and concentration measurements of aqueous extracts (1:1 by weight) of core samples taken in the salt scar and adjacent areas indicate that unusual concentrations of NaCl-rich salt are present at depths to at least 8 m (26 ft) in the bedrock; however, little salt occurs in the eolian sand. Historic aerial photographs, anecdotal reports from oil-lease operators, and tree-ring records indicate that the surrounding oak forest was largely established after 1935 and thus postdates the majority of surface damage at the site. Blackjack oaks adjacent to the salt scar have anomalously elevated chloride ( 400 ppm) in their leaves and record the presence of NaCl-rich salt or salty water in the shallow subsurface. The geophysical measurements also indicate moderately elevated conductance beneath the oak forest adjoining the salt scar.

Oklahoma↗

USGS2010

Streamflow, suspended-sediment, and soil-erosion data from Kaulana and Hakioawa watersheds, Kaho'olawe, Hawai'i, 2006 to 2010

Various events over the last two centuries have destroyed the vegetation and caused rapid soil erosion on large areas of the small, arid, windy tropical shield-volcano island of Kaho`olawe, Hawai`i. These activities were largely halted in the 1990s, and efforts have been made to restore the island's vegetation in order to stem erosion. In 2003, the Kaho`olawe Island Reserve Commission (KIRC) began restoration efforts using native vegetation. In 2006 to 2010, the U.S. Geological Survey (USGS), in cooperation with the KIRC, monitored streamflow, fluvial suspended-sediment transport, and erosion rates in the Hakioawa and Kaulana watersheds on northeastern Kaho`olawe to provide information needed to assess the effectiveness of restoration efforts. This report presents the results from this monitoring. Results.-Hakioawa and Kaulana gulches were dry about 90 percent of the time during the monitoring period; mean annual flow was 0.06 ft3/s at Hakioawa Gulch gage and 0.01 ft3/s at the Kaulana Gulch gage. For the period when the sediment gages on both gulches were operating concurrently (October 2007 to September 2009), sediment discharge was higher from Hakioawa Gulch than from Kaulana Gulch. The annual suspended-sediment loads for the concurrent period averaged 1,880 tons at the Hakioawa Gulch gage and 276 tons at the Kaulana Gulch gage. Of the 77 erosion-monitoring sites in the Hakioawa and Kaulana watersheds, 50 had overall rates of change indicating erosion for the monitoring period, ranging from -1 to -10 mm/yr and averaging -3 mm/yr. Seven sites had rates of change indicating overall deposition, ranging from 1 to 15 mm/yr and averaging 5 mm/yr. Twenty had rates of change below detection (less than ?1 mm/yr). The average rate of change for the 26 sites in areas that have undergone restoration by the KIRC was below the detection limit of the erosion-monitoring method. In comparison, the 51 sites in nonrestoration areas averaged -2 mm/y. Both of these averages, however, include sites that showed overall erosion as well as sites that showed overall deposition. The average rate of change was -1 mm/yr for both the 32 sites on rills and the 42 sites on interfluves; both categories include sites that showed deposition as well as sites that showed erosion. All three sites on hummocks showed overall erosion, with an average rate of -8 mm/yr. Both the Hakioawa and Kaulana watersheds showed an average rate of change of -1 mm/yr, and both included sites that showed erosion and sites that showed deposition. For sites with negative rates of change indicating erosion, the average rate of change during the monitoring period was -2 mm/yr in restoration areas and -3 mm/yr in nonrestoration areas. For sites with positive rates of change indicating deposition, the average rate of change was 5 mm/yr in restoration areas and 6 mm/yr in nonrestoration sites. The average rate of change for rills was 1 mm/yr in restoration areas and -2 mm/yr in nonrestoration sites. The average rate of change for interfluves was below detection in restoration areas and -1 mm/yr in nonrestoration areas. Potential Use and Limitation of Data.-Additional statistical comparisons of various subsets of erosion data can be used to assess the effectiveness of restoration efforts or how existing landforms, vegetation, climate, and other physical basin characteristics affect erosion and fluvial sediment transport in the watersheds. Further investigation to identify what factors cause the Kaulana watershed to have much lower runoff and sediment loads than the Hakioawa watershed may yield valuable information for developing and modifying restoration strategies. Continued monitoring of streamflow, sediment transport, and erosion is key to assessing the long-term effectiveness of restoration and can provide insight to the island's recovery since the eradication of feral goats and cessation of use as a military bombing range; the results of this study provide the

Hawaii↗

USGS2013

Holocene sediment distribution on the inner continental shelf of northeastern South Carolina: implications for the regional sediment budget and long-term shoreline response

High-resolution geophysical and sediment sampling surveys were conducted offshore of the Grand Strand, South Carolina to define the shallow geologic framework of the inner shelf. Results are used to identify and map Holocene sediment deposits, infer sediment transport pathways, and discuss implications for the regional coastal sediment budget. The thickest deposits of Holocene sediment observed on the inner shelf form shoal complexes composed of moderately sorted fine sand, which are primarily located offshore of modern tidal inlets. These shoal deposits contain ~67 M m 3 of sediment, approximately 96% of Holocene sediment stored on the inner shelf. Due to the lack of any significant modern fluvial input of sand to the region, the Holocene deposits are likely derived from reworking of relict Pleistocene and older inner-shelf deposits during the Holocene marine transgression. The Holocene sediments are concentrated in the southern part of the study area, due to a combination of ancestral drainage patterns, a regional shift in sediment supply from the northeast to the southwest in the late Pleistocene, and proximity to modern inlet systems. Where sediment is limited, only small, low relief ridges have formed and Pleistocene and older deposits are exposed on the seafloor. The low-relief ridges are likely the result of a thin, mobile veneer of sediment being transported across an irregular, erosional surface formed during the last transgression. Sediment textural trends and seafloor morphology indicate a long-term net transport of sediment to the southwest. This is supported by oceanographic studies that suggest the long-term sediment transport direction is controlled by the frequency and intensity of storms that pass through the region, where low pressure systems yield net along-shore flow to the southwest and a weak onshore component. Current sediment budget estimates for the Grand Strand yield a deficit for the region. Volume calculations of Holocene deposits on the inner shelf suggest that there is sufficient sediment to balance the sediment budget and provide a source of sediment to the shoreline. Although the processes controlling cross-shelf sediment transport are not fully understood, in sediment-limited environments such as the Grand Strand, erosion of the inner shelf likely contributes significant sediment to the beach system.

South Carolina↗

USGS2010

Geologic map of Lassen Volcanic National Park and vicinity, California

The geologic map of Lassen Volcanic National Park (LVNP) and vicinity encompasses 1,905 km 2 at the south end of the Cascade Range in Shasta, Lassen, Tehama, and Plumas Counties, northeastern California (fig. 1, sheet 3). The park includes 430 km 2 of scenic volcanic features, glacially sculpted terrain, and the most spectacular array of thermal features in the Cascade Range. Interest in preserving the scenic wonders of the Lassen area as a national park arose in the early 1900s to protect it from commercial development and led to the establishment in 1907 of two small national monuments centered on Lassen Peak and Cinder Cone. The eruptions of Lassen Peak in 1914-15 were the first in the Cascade Range since widespread settling of the West in the late 1800s. Through the printed media, the eruptions aroused considerable public interest and inspired renewed efforts, which had languished since 1907, to establish a national park. In 1916, Lassen Volcanic National Park was established by combining the areas of the previously established national monuments and adjacent lands. The southernmost Cascade Range is bounded on the west by the Sacramento Valley and the Klamath Mountains, on the south by the Sierra Nevada, and on the east by the Basin and Range geologic provinces. Most of the map area is underlain by middle to late Pleistocene volcanic rocks; Holocene, early Pleistocene, and late Pliocene volcanic rocks (<3.5 m.y.) are less common. Paleozoic and Mesozoic rocks are inferred to underlie the volcanic deposits (Jachens and Saltus, 1983), but the nearest exposures of pre-Tertiary rocks are 15 km to the south, 9 km to the southwest, and 12 km to the west. Diller (1895) recognized the young volcanic geology and produced the first geologic map of the Lassen area. The map (sheet 1) builds on and extends geologic mapping by Williams (1932), Macdonald (1963, 1964, 1965), and Wilson (1961). The Lassen Peak area mapped by Christiansen and others (2002) and published in greater detail (1:24,000) was modified for inclusion here. Figure 2 (sheet 3) shows the mapping credit for previous work; figure 3 (sheet 3) shows locations discussed throughout the text. A CD-ROM entitled Database for the Geologic Map of Lassen Volcanic National Park and Vicinity, California accompanies the printed map (Muffler and others, 2010). The CD-ROM contains ESRI compatible geographic information system data files used to create the 1:50,000-scale geologic map, both geologic and topographic data and their associated metadata files, and printable versions of the geologic map and pamphlet as PDF formatted files. The 1:50,000-scale geologic map was compiled from 1:24,000-scale geologic maps of individual quadrangles that are also included in the CD-ROM. It also contains ancillary data that support the map including locations of rock samples selected for chemical analysis (Clynne and others, 2008) and radiometric dating, photographs of geologic features, and links to related data or web sites. Data contained in the CD-ROM are also available on this Web site. The southernmost Cascade Range consists of a regional platform of basalt and basaltic andesite, with subordinate andesite and sparse dacite. Nested within these regional rocks are 'volcanic centers', defined as large, long-lived, composite, calc-alkaline edifices erupting the full range of compositions from basalt to rhyolite, but dominated by andesite and dacite. Volcanic centers are produced by the focusing of basaltic flux from the mantle and resultant enhanced interaction of mafic magma with the crust. Collectively, volcanic centers mark the axis of the southernmost Cascade Range. The map area includes the entire Lassen Volcanic Center, parts of three older volcanic centers (Maidu, Dittmar, and Latour), and the products of regional volcanism (fig. 4, sheet 3). Terminology used for subdivision of the Lassen Volcanic Center has been modified from Clynne (1984, 1990).

California↗

USGS2007

Geologic controls on movement of produced-water releases at US geological survey research Site A, Skiatook lake, Osage county, Oklahoma

Highly saline produced water was released from multiple sources during oil field operations from 1913 to 1973 at the USGS research Site A on Skiatook Lake in northeastern Oklahoma. Two pits, designed to hold produced water and oil, were major sources for release of these fluids at the site. Produced water spills from these and other features moved downslope following topography and downdip by percolating through permeable eolian sand and colluvium, underlying permeable sandstone, and, to a lesser extent, through shales and mudstones. Saline water penetrated progressively deeper units as it moved through the gently dipping bedrock to the north and NW. A large eroded salt scar north of the pits coincides with underlying fine-grained rocks that have retained substantial concentrations of salt, causing slow revegetation. Where not eroded, thick eolian sand or permeable sandstone bedrock is near the surface, and vegetation has been little affected or has reestablished itself after the introduced salt was flushed by precipitation. The extent of salt-contaminated bedrock extends well beyond existing surface salt scars. These results indicate that one of the legacies of surface salt spills can be a volume of subsurface salinization larger than the visible surface disturbance.

Oklahoma↗

USGS1986

Precambrian basement geology of North and South Dakota

Combined analysis of drill-hole, gravity, and magnetic data indicates that the buried Precambrian basement rocks of the Dakotas can be divided into several lithotectonic terranes. Eastern North Dakota and northeastern South Dakota are underlain by Archean gneiss. Except for the Black Hills region of South Dakota, where Archean rocks are also exposed, the western third of both Dakotas is underlain mainly by Early Proterozoic gneiss and metasedimentary rocks. Part of this region is underlain by Archean crust with an Early Proterozoic tectonic overprint. A broad transition zone of strongly overprinted Archean crust occurs between the Proterozoic rocks to the west and the Archean rocks to the east. South central South Dakota is underlain by an Early Proterozoic batholith. Early Proterozoic felsic volcanic rocks occur in southeast South Dakota. The bootheel portion of South Dakota contains a diverse assemblage of basement rocks that are partly Archean in age.Churchill Province rocks of the Trans-Hudson foldbelt project into the western Dakotas. The Thompson nickel belt and the Pickwitonei gneiss belt correlate with the western and eastern halves, respectively, of the transition between Archean and Proterozoic crust, and the Archean Glennie – Hanson Lake microcontinent of the Churchill Province likely extends into western North Dakota. Archean rocks of Minnesota extend into the eastern Dakotas, and the Wyoming craton extends to the Black Hills region. The Cheyenne foldbelt projects into southwest South Dakota. The Penokean foldbelt of Michigan and Wisconsin does not extend into the Dakotas, but it most likely extends into northwest Iowa.Tectonic evolution of the Early Proterozoic terrane in the Dakotas was most likely similar to plate tectonic models for the evolution of the Trans-Hudson foldbelt in the Churchill Province. As in the Churchill Province, the western Dakotas are underlain by Early Proterozoic rocks, but it is not known whether these rocks formed as a result of rifting and subsequent closure of a once extensive Archean crust or as a result of collision of once widely separated blocks of Archean crust.

North Dakota, South Dakota↗

USGS1998

Geologic map of the Ennis 30' x 60' quadrangle, Gallatin and Madison Counties, Montana

The Ennis 1:100,000 quadrangle lies within both the Laramide (Late Cretaceous to early Tertiary) foreland province of southwestern Montana and the northeastern margin of the middle to late Tertiary Basin and Range province. The oldest rocks in the quadrangle are Archean high-grade gneiss, and granitic to ultramafic intrusive rocks that are as old as about 3.0 Ga. The gneiss includes a supracrustal assemblage of quartz-feldspar gneiss, amphibolite, quartzite, and biotite schist and gneiss. The basement rocks are overlain by a platform sequence of sedimentary rocks as old as Cambrian Flathead Quartzite and as young as Upper Cretaceous Livingston Group sandstones, shales, and volcanic rocks. The Archean crystalline rocks crop out in the cores of large basement uplifts, most notably the 'Madison-Gravelly arch' that includes parts of the present Tobacco Root Mountains and the Gravelly, Madison, and Gallatin Ranges. These basement uplifts or blocks were thrust westward during the Laramide orogeny over rocks as young as Upper Cretaceous. The thrusts are now exposed in the quadrangle along the western flanks of the Gravelly and Madison Ranges (the Greenhorn thrust and the Hilgard fault system, respectively). Simultaneous with the west-directed thrusting, northwest-striking, northeast-side-up reverse faults formed a parallel set across southwestern Montana; the largest of these is the Spanish Peaks fault, which cuts prominently across the Ennis quadrangle. Beginning in late Eocene time, extensive volcanism of the Absorka Volcanic Supergroup covered large parts of the area; large remnants of the volcanic field remain in the eastern part of the quadrangle. The volcanism was concurrent with, and followed by, middle Tertiary extension. During this time, the axial zone of the 'Madison-Gravelly arch,' a large Laramide uplift, collapsed, forming the Madison Valley, structurally a complex down-to-the-east half graben. Basin deposits as thick as 4,500 m filled the graben. Pleistocene glaciers sculpted the high peaks of the mountain ranges and formed the present rugged topography.

Montana↗

USGS1998

More than one way to stretch: A tectonic model for extension along the plume track of the Yellowstone hotspot and adjacent Basin and Range Province

The eastern Snake River Plain of southern Idaho poses a paradoxical problem because it is nearly aseismic and unfaulted although it appears to be actively extending in a SW-NE direction continuously with the adjacent block-faulted Basin and Range Province. The plain represents the 100-km-wide track of the Yellowstone hotspot during the last ∼16–17 m.y., and its crust has been heavily intruded by mafic magma, some of which has erupted to the surface as extensive basalt flows. Outside the plain's distinct topographic boundaries is a transition zone 30–100 km wide that has variable expression of normal faulting and magmatic activity as compared with the surrounding Basin and Range Province. Many models for the evolution of the Snake River Plain have as an integral component the suggestion that the crust of the plain became strong enough through basaltic intrusion to resist extensional deformation. However, both the boundaries of the plain and its transition zone lack any evidence of zones of strike slip or other accommodation that would allow the plain to remain intact while the Basin and Range Province extended around it; instead, the plain is coupled to its surroundings and extending with them. We estimate strain rates for the northern Basin and Range Province from various lines of evidence and show that these strains would far exceed the elastic limit of any rocks coupled to the Basin and Range; thus, if the plain is extending along with its surroundings, as the geologic evidence indicates, it must be doing so by a nearly aseismic process. Evidence of the process is provided by volcanic rift zones, indicators of subsurface dikes, which trend across the plain perpendicular to its axis. We suggest that variable magmatic strain accommodation, by emplacement and inflation of dikes perpendicular to the least principal stress in the elastic crust, allows the crust of the plain to extend nearly aseismically. Dike injection releases accumulated elastic strain but generates only the small earthquakes associated with dike propagation. The rate of dike emplacement required to accommodate the estimated longitudinal strain rate of the plain is roughly a composite width of 10 m every 1000 years for the geologically youngest and most active part of the plain. The locus of most rapid intrusion and strain has migrated toward Yellowstone and is now in the northeastern 100–150 km of the plain. Reduced magmatic input in the transition zone of the plain causes the transitional expression of seismicity and faulting there.

Tectonics↗

USGS2000

Sleepers River, Vermont: a Water, Energy, and Biogeochemical Budgets Program site

The Sleepers River Research Watershed in northeastern Vermont was established by the Agricultural Research Service (ARS) of the U.S. Department of Agriculture in 1959 and is now operated jointly by the U.S. Geological Survey (USGS) and the U.S. Army Cold Regions Research and Engineering Laboratory (CRREL), will collaboration from several other Federal Agencies and Universities. The USGS has contributed to the understanding of hydrological processes and added a major biogeochemical cycling research component in the last 10 years of Sleepers River's 40-year history as a field laboratory. The USGS uses hydrologic measurements and chemical and isotopic tracing techniques to determine how water moves from the hillslope to the stream, and what processes cause chemical changes, such as neutralization of acid rain. Research results provide insights on how pollutants move through ecosystems, and how ecosystems may respond to climatic change.

Vermont↗

USGS2013

Quaternary geophysical framework of the northeastern North Carolina coastal system

The northeastern North Carolina coastal system, from False Cape, Virginia, to Cape Lookout, North Carolina, has been studied by a cooperative research program that mapped the Quaternary geologic framework of the estuaries, barrier islands, and inner continental shelf. This information provides a basis to understand the linkage between geologic framework, physical processes, and coastal evolution at time scales from storm events to millennia. The study area attracts significant tourism to its parks and beaches, contains a number of coastal communities, and supports a local fishing industry, all of which are impacted by coastal change. Knowledge derived from this research program can be used to mitigate hazards and facilitate effective management of this dynamic coastal system.

North Carolina↗

USGS2012

Sea-floor geology of Long Island Sound north of Duck Pond Point, New York

The U.S. Geological Survey, the National Oceanic and Atmospheric Administration (NOAA), and the Connecticut Department of Environmental Protection are mapping the sea floor in coastal areas of the northeastern United States. As part of the project, more than 100 square kilometers of multibeam-echosounder data, 23 sediment samples, bottom video, and 86 still photographs were obtained from an area in Long Island Sound north of Duck Pond Point, New York, in the study area of NOAA survey H11999. This report delineates the sediment types and sea-floor features found within this area in order to better understand the sea-floor processes occurring in this part of Long Island Sound. The sea floor in the study area is dominated by ubiquitous sand-wave fields and three northeast-southwest trending bathymetric depressions. Barchanoid and transverse sand waves, including sinusoidal, bifurcating, arced, and straight-crested morphologies, are variably present. Asymmetrical sand-wave profiles indicate a westward to southwestward direction of sediment transport in most of the study area; current ripples and megaripples on the stoss slopes of the sand waves indicate transport is ongoing. The majority of the sediment on the sea floor is sand, although bouldery, gravelly, and muddy sediments are also present. Gray, cohesive mud crops out on the walls of some of the scour depressions associated with the troughs of large sand waves. Clasts of the muddy sediment scattered on the sea floor around the depressions demonstrate the intensity of the scour and suggest erosion of the underlying distal deltaic sediments.

New York↗

USGS2015

Water levels of the Ozark aquifer in northern Arkansas, 2013

The Ozark aquifer is the largest aquifer, both in area of outcrop and thickness, and the most important source of freshwater in the Ozark Plateaus physiographic province, supplying water to northern Arkansas, southeastern Kansas, southern Missouri, and northeastern Oklahoma. The study area includes 16 Arkansas counties lying completely or partially within the Ozark Plateaus of the Interior Highlands major physiographic division. The U.S. Geological Survey, in cooperation with the Arkansas Natural Resources Commission and the Arkansas Geological Survey, conducted a study of water levels in the Ozark aquifer within Arkansas. This report presents a potentiometric-surface map of the Ozark aquifer within the Ozark Plateaus of northern Arkansas, representing water-level conditions for the early spring of 2013 and selected water-level hydrographs. The Ozark aquifer in Arkansas is composed of dolomites, limestones, sandstones, and shales of Late Cambrian to Middle Devonian age and ranges in thickness from approximately 1,100 feet (ft) in northwestern Arkansas to more than 4,000 ft in the west-central part of Arkansas. Most wells completed in the aquifer yield between 50 and 100 gallons per minute (gal/min), although some wells may yield as much as 600 gal/min. Water-level measurements were made in wells completed in the Ozark aquifer from February to May 2013. Hydrographs were constructed for nine wells that have water-level measurements with a minimum 20-year period of record. Water-level altitudes in wells used to construct the potentiometric-surface map range from about 1,159 ft to 313 ft above National Geodetic Vertical Datum of 1929 (NGVD 29). The highest water-level altitudes occur in Carroll and Washington Counties while water-level altitudes of less than 400 ft above NGVD 29 are mapped along the eastern and southeastern part of the study area in Independence, Lawrence, Randolph, and Sharp Counties. The lowest water level of 313 ft above NGVD 29 was measured in southwestern Randolph County. The direction of groundwater flow generally is affected by local topography, flowing from high altitudes toward stream valleys. In southern Baxter, eastern Fulton, Independence, eastern Izard, Lawrence, Randolph, and Sharp Counties, the groundwater flow is generally to the south and southeast. In western Fulton and Izard Counties, the groundwater flow is generally to the southwest. In Boone, Marion, Newton, Searcy, and Stone Counties, the groundwater flow is generally to the east and northeast. In eastern Benton, Carroll, Madison, and eastern Washington Counties, the groundwater flow is generally to the north and northeast. In western Benton and western Washington Counties, the groundwater flow is generally to the west and northwest. The general level and shape of the potentiometric surface has changed little since predevelopment. A comparison of the predevelopment potentiometric surface and the 2007, 2010, and 2013 potentiometric surfaces indicate general agreement between the mapped surfaces with the exception of parts of Benton, Boone, Marion, and Washington Counties. In Boone and northern Marion Counties in 2013, water levels have declined when compared to the predevelopment potentiometric surface, although the direction of flow is still to the northeast and north. In southern Marion County, water levels have declined when compared to the predevelopment, 2007, and 2010 potentiometric surfaces, although the direction of flow is towards and along the stream valleys. In western Benton and northwestern Washington Counties, water levels are similar when compared to the predevelopment potentiometric surface, and the direction of flow is to the west and northwest, similar to the predevelopment direction of flow. The mapped 2007 and 2010 potentiometric surfaces are very different from the mapped 2013 potentiometric surface in western Benton and northwestern Washington Counties. The mapped 2013 potentiometric surface in western Benton and northwestern Washington Counties follows the contours of the top of the formation, similar to the predevelopment potentiometric surface. Since 1975, water use in the Ozark aquifer has declined 45 percent, while water levels in Benton, Boone, Marion, and Washington Counties continue to decline. Nine hydrographs were selected as representative of the water-level conditions in their respective counties. Wells in Fulton, Izard, and Newton Counties (station names 20N08W27ABD1, 18N09W15BCB1, and 16N21W34ABC1, respectively) have water levels that are within the usual range of values for their respective counties. Wells in Boone, Marion, and Washington Counties (station names 18N19W19BCC1, 19N15W20ACC1, and 16N32W09ABD1, respectively) have water levels that have recently declined or are declining for the period of record. Wells in Benton, Carroll, and Sharp Counties (station names 19N29W07DAA1, 21N26W17BCC1, and 15N05W06DDD1, respectively) have water levels that have been rising recently.

Arkansas↗