SEARCH · USGS Science

Results for “JGR Earth Surface”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

641 records · Page 25Linked to original sources

USGS2026

Seabed maps showing topography, ruggedness, backscatter intensity, sediment mobility, and the distribution of geologic substrates in quadrangle 3 of the Stellwagen Bank National Marine Sanctuary region offshore of Boston, Massachusetts

The U.S. Geological Survey, in cooperation with the National Marine Sanctuary Program of the National Oceanic and Atmospheric Administration, has conducted seabed mapping and related research in the Stellwagen Bank National Marine Sanctuary (SBNMS) region since 1993. The area being mapped using geophysical and geological data includes the SBNMS and the surrounding region, which totals approximately 3,700 square kilometers (km 2 ) and is subdivided into 18 quadrangles. The seabed is a glaciated terrain that is topographically and texturally diverse. Quadrangle 3, the subject of this scientific investigations map, has a mapped area of 185 km 2 and has water depths that range from about 30 meters (m) on the Stellwagen Bank crest to about 135 m in a basin east of South Ninety Bank, which lies off the eastern margin of Stellwagen Bank. Seven map types, each at a scale of 1:25,000, depict seabed topography, ruggedness, backscatter intensity, distribution of geologic substrates, sediment mobility, distribution of fine- and coarse-grained sand, and substrate mud content. These maps show the distribution of geologic substrates on the southeastern part of Stellwagen Bank, on adjacent banks and basins in deeper water to the east, in the eastern part of Race Point Channel to the south of the bank, and on the northern slope of Cape Cod. Interpretations of multibeam sonar bathymetric and seabed backscatter imagery, photographs, video imagery, and grain-size analyses were used to create the geology-based maps. Data from 309 stations were analyzed, including 279 sediment samples. The geologic substrate maps of quadrangle 3 show the distribution of 21 geologic substrates that represent a wide range of textures, such as rippled sand, immobile sand, immobile muddy sand, sand that partially veneers gravel, and boulder ridges. Mapped substrates are characterized by sediment grain-size composition, surface morphology, substrate layering, the mobility or immobility of substrate surfaces, and water depth range. This scientific investigations map portrays the major geological elements (substrates, topographic features, and processes) of environments in quadrangle 3. It is intended to provide a foundation for research into present and past sediment transport processes in a complex terrain, provide insights into the ecological requirements of invertebrate and vertebrate species that use the various substrates, and support seabed management in the region.

Quadrangle 3 of the Stellwagen Bank National Marin↗

USGS2023

Hidden system identification: Basin modeling as a tool for examining sedimentary geothermal resource potential

Three-dimensional (3D) geologic and temperature models have been developed for the onshore U.S. Gulf Coast. The results from these models identify areas of moderate- to high-temperature (90°-150°C and >150°C; respectively) geothermal resources at depths <6 km. This modeling study addresses the fundamental challenge of predicting where opportune temperature and lithology coincide. Unlike traditional geothermal systems with surface expressions of hydrothermal circulation (e.g., hot springs, fumaroles, sinter), sedimentary geothermal systems (SGS) are generally hidden. Historically, simplified efforts to predict subsurface temperatures in sedimentary basins have focused on linear temperature extrapolation that does not consider the variable thermal properties of different lithologies or lithologic changes with depth (e.g., compaction, lithification). Therefore, the need to understand basin architecture and predict temperatures in 3D within SGS is paramount to identifying geothermal resources and determining economic feasibility. Basin modeling software has long been used to characterize the subsurface conditions of sedimentary basins, including temperature, in the pursuit of finding hydrocarbons. This tool can also be adapted to evaluate the potential of geothermal resources in a sedimentary basin by predicting the confluence of desirable temperatures and reservoir lithologies. In this work, PetroMod basin modeling software was used to create a regional geologic model of the onshore U.S. Gulf Coast, covering over 500,000 km 2 calibrated to temperature data from wells. Inputs include structural surfaces from commercial databases, lithology information derived from published literature, and corrected bottom-hole temperatures (BHT) from over 6,000 wells. The resulting 3D geologic model can be used to predict temperatures throughout the basin. Maps were exported showing the depth, depositional unit, and reservoir lithology at which temperatures of 90°C and 150°C were reached, revealing over 400,000 km 2 of moderate- to high-temperature resources at depths <6 km. These maps function as a first-order screening tool to identify areas where low-, moderate-, or high-grade resource potential may exist, based on temperature and if optimal reservoir lithologies or depositional units of interest are present. Depending on the success criteria of a project, the same maps can be exported for any isotherm or incorporate other 1407 Gardner and Birdwell subsurface properties. The methodology employed in this work can be applied in any sedimentary basin with available subsurface data. Further calibration incorporating other data, including pressure and porosity, can expand the utility of basin modeling for geothermal evaluations. Basin modeling is a powerful but underutilized tool for identifying prospective geothermal resources in sedimentary basins.

Conference Paper↗

USGS2024

Changes in soil erosion caused by wildfire: A conceptual biogeographic model

Soil erosion rates after wildfire are strongly controlled by intrinsic properties such as topography, weather, climate, soil, and vegetation. These landscape and hydroclimatic properties are important in determining post-fire erosion rates; however, their influence on post-fire erosion and their interaction with the intensity of a wildfire remains uncertain. A key limitation in resolving this uncertainty is the lack of conceptual models and frameworks for organising data related to the geomorphic sensitivity of landscapes to wildfire. Our aim is to develop a framework for consolidating understanding of post-fire erosion in the context of hydroclimatic conditions which contribute to system states, for example soil and vegetation properties, and wildfire regime. The framework is developed around a simple conceptual model where the change in erosion due to wildfire is a product of change in runoff generation and sediment supply, which is strongly related to landscape net primary productivity (NPP). We hypothesised that geomorphic sensitivity to wildfire should vary as a unimodal humped relationship across a gradient of NPP, peaking at an intermediate level. To develop this framework and to test the hypothesis, we first review intrinsic soil and vegetation properties related to the supply and transport of sediment from burned and unburned hillslopes. Net primary productivity is systematically related to these intrinsic properties because it integrates many processes involved in soil and vegetation development. Empirical data indicate a trend in the change in surface runoff generation with NPP after wildfire, peaking at an NPP of approximately 15 Mg C ha −1 y −1 . A simple model of fuel availability and soil heating are correlated with a similar “humped” trend in sediment supply. These results are consistent with our conceptual model, which indicates that sediment supply and runoff contribute towards a distinct peak in wildfire effects on erosion at an intermediate level of NPP. We propose that landscapes of intermediate NPP typically have the highest quantity of fuel available to burn, which cause large changes to the soil surface properties. Landscapes at intermediate NPP also tend to produce intrinsic soil and vegetation properties that promote erosion after wildfire. The interplay between these short and long-term landscape characteristics is strongest at intermediate levels of NPP. Our proposed biogeographic model of geomorphic sensitivity to wildfire was supported by erosion data from burned hillslope and zero-order catchments studies from a range fire-prone landscapes in Australia and North America. Our proposed conceptual model will help identify areas most vulnerable to post-fire erosion changes.

Geomorphology↗

USGS2025

Groundwater response to managed aquifer recharge at the Southeast Houghton Artificial Recharge Project in Tucson, Arizona

Managed aquifer recharge is a widespread practice for storing water in the subsurface as groundwater. At a managed aquifer recharge facility in southern Arizona, groundwater-level and repeat microgravity data were collected to monitor aquifer response. These data were used to inform parameter identification for an unsaturated-zone flow model used to simulate the recharge process. The facility, the Southeast Houghton Artificial Recharge Project (SHARP), consists of 3 surface basins (about 27,600 square meters [6.8 acres] total surface area) where recycled water is distributed in recharge cycles lasting several months, with dry periods in between. During the study period, December 2020–December 2022, Tucson Water (the City of Tucson’s water utility) reported 6.56×10 6 cubic meters of water (5,320 acre-feet) recharged. Monitoring included groundwater-level observations at 3 monitoring wells and repeat microgravity measurements at as many as 22 locations (some stations were destroyed between surveys). Six gravity surveys were carried out using absolute- and relative-gravity meters. Large gravity increases, more than 250 microgals, were observed during the first repeat survey, 3.5 months after the start of recharge, but only in the immediate vicinity of the recharge basins. Data show that water moved downward to the water table, and storage changes in the unsaturated zone away from the facility were likely minimal. Gravity decreased at stations more than 1 kilometer from the facility, consistent with regional groundwater-level changes. Groundwater-level increases in wells adjacent to the recharge basins began 2 months after the second repeat gravity survey, and 5.5 months after recharge began. Unsaturated-zone flow modeling was carried out using software that simulates water movement and parameter estimation. Model calibration was carried out by minimizing an objective function calculated from the differences between simulated and observed groundwater levels, and between simulated and observed repeat microgravity data. Including repeat microgravity data in the objective function reduced the uncertainty in estimated parameter values for saturated hydraulic conductivity and saturated water content. Modeling indicated that the unsaturated zone between the recharge basins and the water table does not become saturated even after 685 days of simulated infiltration. This gradual wetting may account for increasing infiltration rates over time, as hydraulic conductivity increases with increasing water content. Unsaturated-zone water content decreased rapidly between recharge cycles. Model-simulated groundwater mounding extended about 1 kilometer from the center of SHARP after the 685-day period following the onset of recharge.

Arizona↗

USGS2024

Thermo-hydrologic processes governing supra-permafrost talik dynamics in discontinuous permafrost near Umiujaq (Québec, Canada)

Widespread supra-permafrost talik formation is currently recognized as a critical mechanism that could accelerate permafrost thaw in the Arctic (e.g., Connon et al. 2018; Farquharson et al. 2022). However, the trajectory of permafrost dynamics following talik formation may prove difficult to predict. Physically-based cryohydrogeologic models provide a powerful tool for understanding processes and factors controlling talik dynamics and, ultimately, how permafrost will respond to climate change. Such models are typically used to represent multiple non-linear processes relevant for groundwater systems in cold regions, such as coupled heat and groundwater movement, including freeze-thaw dynamics and the effects on the surface energy balance and the subsurface thermal and hydraulic properties (Lamontagne-Hallé et al. 2020). Though cryohydrogeologic modeling advances have been made in simulating talik dynamics, few applications have been tested against robust long-term hydrometeorological and subsurface observations.

Quebec↗

USGS2025

Anomalous shear stress variation in wet granular medium: Implications for landslide lateral faults

Landslide assessments typically focus on the mechanical properties of the basal shear zone, but lateral faults are frequently overlooked, possibly due to their lower normal stresses and variably saturated conditions. Using double-cylinder shear experiments on wet granular systems as analogs for landslide lateral faults, we observe anomalous shear stress variations with fluid volume fractions, defying an expected unimodal relationship associated with capillary cohesion. At low fluid volume fractions, shear strength weakens as the wet grain assembly experiences reduced lateral pressure and increased boundary slip. This boundary slip subsequently vanishes, with an abrupt strengthening due to the dilation of the grain assembly against fluid surface tension as saturation approaches. Strike-slip motion and confinement in this system explain the strength anomaly, highlighting a critical role of lateral faults in landslide stability, particularly in cases where dynamics cannot be adequately explained by monitored pore-water pressure or basal friction.

Geophysical Research Letters↗

USGS2025

The abandoned mine inventory of the United States—A brief summary

The Infrastructure Investment and Jobs Act of 2021 required the Secretary of the Interior to establish a program to inventory abandoned hard-rock mines in the United States. The Department of the Interior’s Office of Environmental Policy and Compliance asked the U.S. Geological Survey’s Mineral Deposit Database project (USMIN) to use existing data sources to build an inventory of all individual abandoned mine features in the United States. In addition to feature locations, this new database documents the surface land management agency, associated physical and environmental hazards, and any completed mitigation efforts. This information will improve risk assessment and support land management efforts, including hazard mitigation, ecosystem restoration planning, and reclamation. This fact sheet provides a brief overview of USMIN’s collaborative efforts with Federal, State, and Tribal agencies to build a comprehensive and authoritative national inventory of abandoned mine features.

Fact Sheet↗

USGS2025

PFAS sampling activities in the U.S. Geological Survey national networks

Per- and polyfluoroalkyl substances (PFAS), frequently called “forever chemicals,” are used for a wide variety of industrial purposes and are often found in common household and industrial items such as firefighting foams, non-stick cookware, and water-resistant materials. The contamination of water, air, and soil by PFAS is a national and global issue due to their widespread occurrence in multiple applications and resistance to biodegradation and other traditional treatment processes. Research indicates that many PFAS can be emitted to the atmosphere and transported and deposited long distances from the source. The U.S. Geological Survey (USGS) Water Resources Mission Area received funding to implement a national-scale sampling effort to assess PFAS occurrence. To follow agency directives, the National Water Quality Network (NWQN) added PFAS sample monitoring for both surface water and groundwater, and also added PFAS monitoring to selected sites in the National Atmospheric Deposition Program (NADP).

General Information Product↗

USGS2024

Imaging of seismic discontinuities using an adjoint method

For imaging of seismic discontinuities at depth, reverse time migration (RTM) is a powerful method to apply to recordings of seismic events. It is especially powerful when an extensive receiver array, numerous seismic sources, or both, permit adequate reconstruction of incident and scattered wavefields at depth. Reconstructing either the incident or scattered wavefield at depth becomes less accurate when relatively few recordings of seismic events are available. Here we explore an inverse scattering approach to imaging discontinuities based on an adjoint method, employing sensitivity kernels (Frechet derivatives) that represent jumps in material properties across seismic-discontinuity surfaces. When combined with ray-based requirements on scattering geometry, it constitutes a powerful approach to determining the locations and amplitudes of the discontinuities, recovering only those properties that can be resolved by a spatially limited source and/or receiver distribution. This is illustrated by synthetic examples with local sources followed by a field example in a subduction zone setting

Washington↗

USGS2024

Mesoproterozoic to Paleozoic tectonics, Pleistocene landforms, and Holocene seismicity in the Blue Ridge: Results from integrated studies of the 9 August 2020, Mw 5.1 earthquake area near Sparta, North Carolina, USA

This field trip examines the results of integrated geologic studies of the 9 August 2020, M w 5.1 earthquake near Sparta, North Carolina, USA. The earthquake generated ~4 km of coseismic surface rupture of the Little River fault and uplifted a surface area of ~11 km 2 . The Little River fault is a thrust fault oriented 110–130°/45–70°SW, and mapped fault segments are en echelon with scarp heights from <5–30 cm. The epicenter is in polydeformed rocks of the Ashe and Alligator Back Metamorphic Suites in the eastern Blue Ridge. Bedrock structure formed during multiple Paleozoic orogenies; the regional foliation strikes NE-SW and dips SE (mean orientation 063°/52°SE). Mapping identified late Paleozoic veins and shear zones, a regional joint set striking 330–340° and 250–240°, and brittle faults that cut the Paleozoic foliation. Brittle faults oriented similar to the Little River fault are mapped up to 4 km along strike from the coseismic rupture along Bledsoe Creek valley, and the combined length of the Little River fault system is ~8 km. Paleoseismic trenches across the Little River fault corroborate the reactivation of an older fault by the 2020 earthquake and reveal two events during late Pleistocene (<50 ka). Surficial mapping identified several terrace deposits, including a deposit along Bledsoe Creek that yielded a 26 Al/ 10 Be isochron burial age of 0.46 ± 0.13 Ma and overlies a brittle fault, thus constraining the timing of movement of the fault at that location. Paleoliquefaction studies document soft-sediment deformation features in alluvium that may represent paleoseismic events. Collectively, these results highlight long-lived paleoseismicity of the Blue Ridge and that the 9 August 2020 earthquake reactivated an older, suitably oriented brittle fault in the bedrock. The Little River fault is an example of a previously unknown but active fault lying outside of known seismic zones with demonstrated recurrence of paleo-ruptures, raising questions about the assumption that damaging earthquakes are limited to areas of ongoing background seismicity, which is counter to seismic hazard assessments in the eastern United States. Bedrock mapping separates eastern Blue Ridge lithostratigraphy of the Lynchburg Group and Ashe and Alligator Back Metamorphic Suites into separate fault-bound packages juxtaposed over various 1.3–1.0 Ga basement rocks of the northern French Broad massif by the Gossan Lead fault.

North Carolina↗

USGS1999

Water quality of Rob Roy Reservoir and Lake Owen, Albany County, and Granite Springs and Crystal Lake Reservoirs, Laramie County, Wyoming, 1997-98

The water quality of four reservoirs was assessed during 1997 and 1998 as a cooperative project between the Cheyenne Board of Public Utilities and the U. S. Geological Survey. The four reservoirs, Rob Roy, Lake Owen, Granite Springs, and Crystal Lake, provide approximately 75 percent of the public water supply for Cheyenne, Wyoming. Samples of water and bottom sediment were collected and analyzed for selected physical, chemical, and biological characteristics to provide data about the reservoirs. Water flows between the reservoirs through a series of pipelines and stream channels. The reservoirs differ in physical characteristics such as elevation, volume, and depth. Profiles of temperature, dissolved oxygen, specific conductance, and pH were examined. Three of the four reservoirs exhibited stratification during the summer. The profiles indicate that stratification develops in all reservoirs except Lake Owen. Stratification developed in Rob Roy, Granite Springs, and Crystal Lake Reservoirs by mid-July in 1998 and continued until September, with the thickness of the epilimnion increasing during that time. Secchi disk readings indicated Rob Roy Reservoir had the clearest water of the four reservoirs studied. The composition of the phytoplankton community was different in the upper two reservoirs from that in the lower two reservoirs. Many of the species found in Rob Roy Reservoir and Lake Owen are associated with oligotrophic, nutrient-poor conditions. In contrast, many of the species found in Granite Springs and Crystal Lake Reservoirs are associated with mesotrophic or eutrophic conditions. The total number of taxa identified also increased downstream. The chemical water type in the reservoirs was similar, but dissolved-solids concentrations were greater in the downstream reservoirs. Water in all four reservoirs was a calcium-bicarbonate type. In the fall of 1997, Rob Roy Reservoir had the lowest dissolved-solids concentration (19 milligrams per liter), whereas Crystal Lake Reservoir had the highest concentration (63 milligrams per liter). Relatively little differences in the concentrations of major-ion species were noted between samples collected near the surface and near the bottom of the same reservoir. In contrast, iron and manganese concentrations generally were higher in samples collected near the bottom of a reservoir than in near-surface samples collected from the same reservoir. Composite bottom-sediment samples from all four reservoirs contained similar concentrations of bulk constituents such as aluminum, iron, phosphorus and titanium, but varied in concentrations of trace elements. Trace-element concentrations in Rob Roy Reservoir and Lake Owen were similar to the crustal average, whereas in Granite Springs and Crystal Lake Reservoirs the concentrations were similar to granitic rocks.

Wyoming↗

USGS2026

Remote compositional analyses of space-weathered lunar maria

Visible-to-shortwave infrared (VSWIR) reflectance spectroscopy has revolutionized our understanding of planetary surface compositions. However, space-weathering processes on airless bodies complicate quantitative compositional analyses. Here, we present a framework to isolate the signatures of space weathering in VSWIR spectra of lunar maria by leveraging radiative transfer modeling under the assumptions that (i) a space-weathered target can be expressed as a mixture of fresh and fully space-weathered components and (ii) remaining signatures can be modeled by including agglutinates as an end-member component. We first validate this approach against laboratory spectra of space-weathered Apollo mare soils of known mineral compositions using a probabilistic Markov Chain Monte Carlo implementation of the Hapke radiative transfer model. Second, we illustrate how this approach can be applied to orbital Moon Mineralogy Mapper data. The proposed space-weathering correction workflow for lunar maria could be expanded to other lunar lithologies and applied to existing and future data sets.

Planetary Science Journal↗

USGS2025

Fiber-optic distributed temperature sensing of hydrologic processes—Diverse deployments and new applications by the U.S. Geological Survey

Fiber-optic distributed temperature sensing instruments harness the temperature-dependent properties of glass to measure temperature continuously along optical fibers by using precise pulses of laser light. In the mid-2000s, this technology was refined for environmental monitoring purposes such as snowpack-air exchange, groundwater/surface-water exchange, and lake-water stratification. Fiber-optic distributed temperature sensing has revealed unprecedented details about preferential flow processes; however, the method is labor intensive and requires specific training, resulting in limited use by the broader water community. With the ongoing national implementation of the U.S. Geological Survey Next Generation Water Observing System, there has been renewed interest in harnessing the unique spatiotemporal monitoring capabilities of fiber-optic distributed temperature sensing. This fact sheet briefly describes this technology, highlights uses by the U.S. Geological Survey, and discusses current applications and future opportunities.

Fact Sheet↗

USGS2025

Flood-Inundation Maps of the Current and Jacks Fork Rivers including the Ozark National Scenic Riverways, Southeast Missouri, 2023

Digital flood-inundation maps for a 131.8-mile reach of the Current River and a 44.6-mile reach of the Jacks Fork River, in southeast Missouri, were created by the U.S. Geological Survey (USGS) in cooperation with the Ozark Foothills Regional Planning Commission and the South Central Ozark Council of Governments. The maps also encompass the 134 miles of the Current and Jacks Fork Rivers within the Ozark National Scenic Riverways, which is the first national park area to protect a river system. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Program website at https://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (hereafter referred to as “stages”) at eight reference USGS streamgages—five on the Current River (USGS station numbers 07064440, 07064533, 07066510, 07067000, and 07068000) and three on the Jacks Fork River (USGS station numbers 07065200, 07065495, and 07066000). Near-real-time stages at these streamgages may be obtained from the USGS National Water Information System at https://doi.org/10.5066/F7P55KJN or the National Weather Service National Water Prediction Service at http://water.noaa.gov/ , which also forecasts flood hydrographs at four of these sites (USGS station numbers 07067000, 07068000, 07065495, and 07066000). Flood profiles were computed for seven of the eight map reaches by means of two-dimensional hydraulic models and the remaining reach by a one-dimensional hydraulic model. The models were calibrated by using stage-streamflow relations or streamflow measurements at the USGS streamgages and from high-flow stage measurements from water-level loggers distributed throughout the reaches. The hydraulic models were used to compute water-surface profiles for flood stages at 1-foot intervals referenced to the streamgage datums. The profile stages ranged from the National Weather Service “action stage” or near bankfull, to a stage exceeding the highest recorded water level at each streamgage. The simulated water-surface profiles were then combined with a digital elevation model (derived from light detection and ranging data having a nonvegetated vertical accuracy of a maximum 10-centimeter root mean square error) to delineate the area flooded at each water level and the associated water depths. The availability of these maps, along with information regarding current stage from the USGS streamgage and forecasted high-flow stages from the National Weather Service, will provide emergency management personnel, resource managers, and residents with information that is critical for flood-response activities such as evacuations and road closures, as well as for postflood recovery efforts.

Missouri↗

USGS2025

Observing northern high-latitude river systems to understand changes in a warming Arctic

Purpose of Review Streams and rivers are undergoing rapid change as the Arctic warms and thaws. We review recent observations in Arctic stream systems to identify ubiquitous changes and the most useful tools for observing change and exploring the underlying processes. Recent Findings Recent literature indicates increasingly significant trends in river hydrology and chemistry due to persistent warming in the Arctic and longer observational records for analysis. However, regional differences in the magnitude and direction of these trends persist. We also observe thresholds in ground thaw and surface–groundwater interactions that can impact river hydrology and chemistry. Summary Warming and thaw are occurring rapidly at high latitudes, resulting in increasing, yet variable responses in stream systems across regions and scales. These differences highlight the need for long-term records and an interdisciplinary approach to explain trends and predict future states. Stream systems respond to multiple landscape changes related to hydrology (changing precipitation and subsurface flow), geology (ground thaw dynamics), and ecology (vegetation change).

Current Climate Change Reports↗

USGS2024

3-D mapping of the conterminous U.S. within the USGS National Cooperative Geologic Mapping Program: Progress and future prospects

The U.S. Geological Survey (USGS) National Cooperative Mapping Program (NCGMP) is bringing together subsurface and three-dimensional information at multiple scales for the conterminous United States from data produced throughout the USGS and by federal and state partners. Components of this work include data inventory and catalog development, data integration and database development, and construction of subregional and basin-scale three-dimensional (3-D) geologic models. At small scales, the NCGMP is compiling subsurface data to create a limited number of subsurface layers that map the majority of the lower 48 States. At larger scales, 3-D models of stratigraphic units are intended to be the subsurface analog and extension of the surface geologic maps made within the Program. The Mapping Program is developing methods of storing, visualizing, and distributing 3-D models and subsurface data from multiple sources in easily shareable, queryable, non-proprietary format(s). We report on progress in 3-D mapping of the conterminous U.S. and on future prospects.

conterminous United States↗

USGS2025

Bølling-Allerød productivity in the subarctic Pacific driven by seasonal upwelling

The Bølling-Allerød deglacial event is marked by high diatom productivity and opal deposition throughout the subarctic Pacific. This opal could either constitute a strengthened biological pump and thus carbon sequestration, or a weakened biological pump and release of marine-sequestered CO 2 to the atmosphere. We quantify silicic acid supply at IODP Site U1340 in the Bering Sea using biogenic opal and δ 30 Si of Coscinodiscus , a diatom genus. These records, along with diatom environmental indicators, suggest the Bølling-Allerød had high silicic acid availability related to a shift from stratification to seasonal upwelling dynamics. We thus propose the primary cause of the high productivity event was increased macronutrient supply from vertical exchange that injected old, nutrient-rich, CO 2 -rich waters into the surface. Enhanced CO 2 release from the subarctic Pacific may help explain critical intervals of CO 2 rise that occur at the onsets of the Bølling-Allerød and PreBoreal.

Geophysical Research Letters↗

USGS2025

A comprehensive geologic framework of the National Crustal Model for seismic hazard studies in the conterminous United States

A three-dimensional (3D) geologic framework has been developed for the conterminous United States (U.S.) as part of the U.S. Geological Survey National Crustal Model to enhance seismic hazard modeling. The geologic framework is created from geologic maps and multiple subsurface geologic unit boundaries including the base of the Miocene, Cenozoic, Phanerozoic, and the Mohorovičić discontinuity. Modifications are made to surficial geologic maps to remove discontinuities across state and country borders. The subsurface distribution of rock type and age is extrapolated from the surface, seeded with subsurface geologic information, and constrained by a map of basement geology. The framework provides the basis for estimates of subsurface seismic velocity and density that is needed to improve estimates of earthquake ground shaking and seismic hazard. The present framework greatly expands and updates a previously published 3D geologic framework of the western part of the U.S. that was itself a first-of-its-kind digital 3D portrayal of the nation.

conterminous United States↗