SEARCH · USGS Science

Results for “Energies”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25Linked to original sources

USGS2011

The influence of wave energy and sediment transport on seagrass distribution

A coupled hydrodynamic and sediment transport model (Delft3D) was used to simulate the water levels, waves, and currents associated with a seagrass ( Zostera marina ) landscape along a 4-km stretch of coast in Puget Sound, WA, USA. A hydroacoustic survey of seagrass percent cover and nearshore bathymetry was conducted, and sediment grain size was sampled at 53 locations. Wave energy is a primary factor controlling seagrass distribution at the site, accounting for 73% of the variability in seagrass minimum depth and 86% of the variability in percent cover along the shallow, sandy portions of the coast. A combination of numerical simulations and a conceptual model of the effect of sea-level rise on the cross-shore distribution of seagrass indicates that the area of seagrass habitat may initially increase and that wave dynamics are an important factor to consider in predicting the effect of sea-level rise on seagrass distributions in wave-exposed areas.

Washington↗

USGS1981

Determination of selenium at trace levels in geologic materials by energy-dispersive X-ray fluorescence spectrometry

Low levels of selenium (0.1-500 ppm) in both organic and inorganic geologic materials can be semiquantitatively measured by isolating Se as a thin film for presentation to an energy-dispersive X-ray fluorescence spectrometer. Suitably pulverized samples are first digested by fusing with a mixture of Na2CO3 and Na2O2. The fusion cake is dissolved in distilled water, buffered with NH4Cl, and filtered to remove Si and the R2O3 group. A carrier solution of Na2TeO4, plus solid KI, hydrazine sulfate and Na2SO3, is added to the filtrate. The solution is then vacuum-filtered through a 0.45-??m pore-size filter disc. The filter, with the thin film of precipitate, is supported between two sheets of Mylar?? film for analysis. Good agreement is shown between data reported in this study and literature values reported by epithermal neutron-activation analysis and spectrofluorimetry. The method can be made quantitative by utilizing a secondary precipitation to assure complete recovery of the Se. The X-ray method offers fast turn-around time and a reasonably high production rate. ?? 1981.

Chemical Geology↗

USGS1977

The entropy and Gibbs free energy of formation of the aluminum ion

A reevaluation of the entropy and Gibbs free energy of formation of Al 3+ (aq) yields −308 ± 15 J/K·mol and 489.4 ± 1.4kj/mol for S 0 298 and ΔG 0 ƒ,298 "> ΔG 0 ƒ,298 respectively. The standard electrode potential for aluminum is 1.691 ± 0.005 volts.

Geochimica et Cosmochimica Acta↗

USGS1985

Low-temperature heat capacity and entropy of chalcopyrite (CuFeS2): estimates of the standard molar enthalpy and Gibbs free energy of formation of chalcopyrite and bornite (Cu5FeS4)

The heat capacity of CuFeS2 (chalcopyrite) was measured between 6.3 and 303.5 K. At 298.15 K, Cp,mo and Smo(T) are (95.67??0.14) J??K-1??mol-1 and (124.9??0.2) J??K-1??mol-1, respectively. From a consideration of the results of two sets of equilibrium measurements we conclude that ??fHmo(CuFeS2, cr, 298.15 K) = -(193.6??1.6) kJ??mol-1 and that the recent bomb-calorimetric determination by Johnson and Steele (J. Chem. Thermodynamics 1981, 13, 991) is in error. The standard molar Gibbs free energy of formation of bornite (Cu5FeS4) is -(444.9??2.1) kJ??mol-1 at 748 K. ?? 1985.

Journal of Chemical Thermodynamics↗

USGS1983

A system for measuring bottom profile, waves and currents in the high-energy nearshore environment

A new data-acquisition system capable of measuring waves, currents and the nearshore profile in breaking waves as high as 5 m has been developed and successfully field-tested. Components of the mechanical system are a sled carrying a vertical mast, a double-drum winch placed landward of the beach, and a line that runs from one drum of the winch around three blocks, which are the corners of a right triangle, to the other drum of the winch. The sled is attached to the shore-normal side of the triangular line arrangement and is pulled offshore by one drum of the winch and onshore by the other. The profile is measured as the sled is towed along the shore-normal transect using an infrared rangefinder mounted landward of the winch and optical prisms mounted on top of the sled's mast. A pressure sensor and two-axis electromagnetic current meter are mounted on the frame of the sled. These data are encoded on the sled and telemetered to a receiving/recording station onshore. Preliminary results suggest that near-bottom offshore-flowing currents during periods of high-energy swell are important in forcing changes to the configuration of the nearshore profile.

Marine Geology↗

USGS1989

Non-energy resources, Connecticut and Rhode Island coastal waters

Cores collected from Long Island Sound, Connecticut, were used to establish control on the geologic framework of the area. Lithologic and stratigraphic analyses verified the presence of the following units: (1) Cretaceous coastal plain, (2) Pleistocene glacial till, (3) late Pleistocene glacial lake, (4) late Pleistocene glacial outwash, and (5) Holocene fluvial, estuarine and marine deposits. Cores collected in Block Island Sound, Rhode Island, were obtained from inferred, relict shoreline features and were analyzed for heavy mineral content. Concentrations ranged from 0.3 to 3.4%; no significant downcore changes were found. The results indicated that surficial sediments in areas of high-velocity tidal flow yield greater amounts of heavy minerals than do inferred placer deposits. During the second phase of the program of study, Connecticut and Rhode Island pooled resources to develop a study plan for the comprehensive quantification of all non-energy resources in the adjacent waters of the states. A literature and data survey was conducted to assess the occurrence, extent, and accessibility of these resources. Sand and gravel and heavy minerals were found in concentrations offering potential for resource exploitation. Constraints on exploitation include (1) water depth restrictions for the protection of shellfish beds and public beaches, (2) fishing activities, (3) military, commercial, and fishing vessel traffic, (4) seafloor cable routes and (5) dump sites. Deposits composed of Pleistocene glacial sediments and/or Holocene marine sediments in regions of little or no user conflict were identified as sites potentially suitable for resource exploitation. The study plan stated additional data needs (geophysical profiling and vibracore sampling) at these sites. Subsequent to these recommendations, high-resolution seismic profiles and sidescan sonographs were obtained from these sites. Seismic stratigraphic analyses confirm the presence of extensive deposits of potential economic value.

Marine Geology↗

USGS1987

On the interpretation of the geomagnetic energy spectrum

Two recent high-degree magnetic energy spectra, based mostly on MAGSAT data, are compared and found to agree very well out to order and degree n = 15, but the spectrum remains somewhat uncertain for higher degrees. The hypothesis that a primary break in the slope of the spectrum, plotted semi-logarithmically, is due to a transition from dominance by core sources to dominance by crustal magnetization is tested. Simple arrays of dipoles and current loops are found whose combined fields fit the spectrum. Two distinctly different ranges of source depth are found to be adequate. Because one range is shallow and the other deep, the hypothesis is supported. ?? 1987.

Physics of the Earth and Planetary Interiors↗

USGS1989

Mapping surface energy balance components by combining landsat thematic mapper and ground-based meteorological data

Surface energy balance components were evaluated by combining satellite-based spectral data with on-site measurements of solar irradiance, air temperature, wind speed, and vapor pressure. Maps of latent heat flux density (λE) and net radiant flux density (R n ) were produced using Landsat Thematic Mapper (TM) data for three dates: 23 July 1985, 5 April 1986, and 24 June 1986. On each date, a Bowen-ratio apparatus, located in a vegetated field, was used to measure λE and R n at a point within the field. Estimates of λE and R n were also obtained using radiometers aboard an aircraft flown at 150 m above ground level. The TM-based estimates differed from the Bowen-ratio and aircraft-based estimates by less than 12 % over mature fields of cotton, wheat, and alfalfa, where λE and R n ranged from 400 to 700 Wm −2 .

Remote Sensing of Environment↗

USGS1981

Significant results from using earth observation satellites for mineral and energy resource exploration

A large number of Earth-observation satellites orbit our world several times each day, providing new information about the land and sea surfaces and the overlying thin layer of atmosphere that makes our planet unique. Meteorological satellites have had the longest history of experimental use and most are now considered operational. The geologic information collected by the Landsat, Polar Orbiting Geophysical Observatory (POGO), Magsat, Heat Capacity Mapping Mission (HCMM) and Seasat land and ocean observation systems is being thoroughly tested, and some of these systems are now approaching operational use. Landsat multispectral images provide views of large areas of the Earth under uniform lighting conditions and can be obtained at a variety of scales and formats. Not only do the Landsat data provide highly useful images showing surficial materials and structures such as folds and faults, but also measurements and computer-derived ratios of the brightness of different rock types, alteration zones, and mineral associations. These data have led to the finding of a variety of new ore deposits. In addition, the combination of Landsat digital data and aeromagnetic data has extended the use of Landsat as an exploration tool which can be used to readily relate surface features to subsurface anomalies. Magsat data, now being collected, are helping refine information on major crustal anomalies that were first recognized during the analysis of POGO data. The more nearly circular orbit, lower altitude, and increased sophistication of its vector magnetometer enable Magsat to provide more precise information than POGO. Information of this type is required to develop crustal models. Although Magsat is designed to operate for only 4–8 months, the number of orbits that it should be able to make will be sufficient to accomplish its mission and to record a major magnetic storm expected in 1980. HCMM is a two-band visible to near-IR (0.55–1.1 μm) and thermal infrared (10.2–12.5 μm) system designed to measure reflected solar energy, determine the heat capacity of rocks and to monitor soil moisture, thermal effluents, plant canopy temperatures and snow cover. Launched in April 1978, it is in sun-synchronous, circular orbit at an altitude of 620 km. It is a relatively low-resolution system with an instantaneous field of view (IFOV) of 500–600 m and a swath width of 716 km. However, the system is designed to detect objects in the range of 260°–340° K with a sensitivity (NEδT) of 0.4°K at 280°. Recording the thermal radiation of urban heat islands and high thermal inertia of quartzite strata in the Appalachian region are two examples of its land applications. Launched in June 1978, Seasat operated for only 100 days, but successfully acquired much information over both sea and land. The collection of synthetic aperture radar (SAR) imagery and radar altimetry was particularly important to geologists. Although there are difficulties in processing and distributing these data in a timely manner, initial evaluations indicate that the radar imagery supplements Landsat data by increasing the spectral range and offering a different look angle. The radar altimeter provides accurate profiles over narrow strips of land (1 km wide) and has demonstrated usefulness in measuring icecap surfaces (Greenland, Iceland, and Antarctica). The Salar of Uyuni in southern Bolivia served as a calibration site for the altimeter and has enabled investigators to develop a land-based smoothing algorithm that is believed to increase the accuracy of the system to 10 cm. Data from the altimeter are currently being used to measure subsidence resulting from ground water withdrawal in the Phoenix-Tucson area.

Advances in Space Research↗

USGS1983

A strategy for mineral and energy resource independence

Data acquired by Landsats 1, 2, and 3, are beginning to provide the information on which an improved mineral and energy resource exploration strategy can be based. Landsat 4 is expected to augment this capability with its higher resolution (30 m) and additional spectral bands in the Thematic Mapper (TM) designed specifically to discriminate clay minerals associated with mineral alteration. In addition, a new global magnetic anomaly map, derived from the recent Magsat mission, has recently been compiled by the National Aeronautics and Space Administration (NASA), the U.S. Geological Survey (USGS), and others. Preliminary, extremely small-scale renditions of this map indicate that global coverage is nearly complete and that the map will improve upon a previous one derived from Polar Orbiting Geophysical Observatory (POGO) data. Digital processing of the Landsat image data and Magsat geophysical data can be used to create three-dimensional stereoscopic models for which Landsat images provide surface reference to deep structural anomalies. Comparative studies of national Landsat lineament maps, Magsat stereoscopic models, and metallogenic information derived from the Computerized Resources Information Bank (CRIB) inventory of U.S. mineral resources, provide a way of identifying and selecting exploration areas that have mineral resource potential. Landsat images and computer-compatible tapes can provide new and better mosaics and also provide the capability for a closer look at promising sites. ?? 1983.

Advances in Space Research↗

USGS1989

Distillation irrigation: A low-energy process for coupling water purification and drip irrigation

A method is proposed for combining solar distillation and drip irrigation to simultaneously desalinize water and apply this water to row crops. In this paper, the basic method is illustrated by a simple device constructed primarily of sheets of plastic, which uses solar energy to distill impaired water and apply the distillate to a widely spaced row crop. To predict the performance of the proposed device, an empirical equation for distillate production, dp , is developed from reported solar still production rates, and a modified Jensen-Haise equation is used to calculate the potential evapotranspiration, et , for a row crop. Monthly values for et and dp are calculated by using a generalized row crop at five locations in the Western United States. Calculated et values range from 1 to 22 cm month −1 and calculated dp values range from 2 to 11 cm month −1 , depending on the location, the month, and the crop average. When the sum of dp plus precipitation, dp + P , is compared to et for the case of 50% distillation irrigation system coverage, the results indicate that the crop's et is matched by dp + P , at the cooler locations only. However, when the system coverage is increased to 66%, the crop's et is matched by dp + P even at the hottest location. Potential advantages of distillation irrigation include the ability: (a) to convert impaired water resources to water containing no salts or sediments; and (b) to efficiently and automatically irrigate crops at a rate that is controlled primarily by radiation intensities. The anticipated disadvantages of distillation irrigation include: (a) the high costs of a system, due to the large amounts of sheeting required, the short lifetime of the sheeting, and the physically cumbersome nature of a system; (b) the need for a widely spaced crop to reduce shading of the system by the crop; and (c) the production of a concentrated brine or precipitate, requiring proper off-site disposal.

Agricultural Water Management↗

USGS2015

The role of water in unconventional in situ energy resource extraction technologies

Global trends toward developing new energy resources from lower grade, larger tonnage deposits that are not generally accessible using “conventional” extraction methods involve variations of subsurface in situ extraction techniques including in situ oil shale retorting , hydraulic fracturing of petroleum reservoirs, and in situ recovery of uranium. Although these methods are economically feasible and perhaps result in a smaller above-ground land-use footprint, there remain uncertainties regarding potential subsurface impacts to groundwater. This chapter provides an overview of the role of water in these technologies and the opportunities and challenges for water reuse and recycling.

Book chapter↗

USGS2020

Relative toxicity and sublethal effects of NaCl and energy-related saline wastewaters on prairie amphibians

Increasing salinity in freshwater environments is a growing problem due both to the negative influences of salts on ecosystems and their accumulation and persistence in environments. Two major sources of increased salinity from sodium chloride salts (NaCl) are saline wastewaters co-produced during energy production (herein, wastewaters) and road salts. Effects of road salts have received more attention, but legacy contamination from wastewaters is widespread in some regions and spills still occur. Amphibians are sensitive to contaminants, including NaCl, because of their porous skin and osmoregulatory adaptations to freshwater. However, similarities and differences between effects of wastewaters and road salts have not been investigated. Therefore, we investigated the relative influence of wastewaters and NaCl at equivalent concentrations of chloride on three larval amphibian species that occur in areas with increased salinity. We determined acute toxicity and growth effects on Boreal Chorus Frogs ( Pseudacris maculata ), Northern Leopard Frogs ( Rana pipiens ), and Barred Tiger Salamanders ( Ambystoma mavortium ). We posited that wastewaters would have additive effects on amphibians compared to NaCl because wastewaters often have additional toxic heavy metals and other contaminants. For NaCl, toxicity was higher for frogs than the salamander. Toxicity of wastewaters was also similar between chorus and leopard frogs. Only chorus frog survival was lower when exposed to wastewater compared to NaCl. Mass and length of leopard and chorus frog larvae decreased with increasing salinity after only 96 hours of exposure but did not for tiger salamanders. Size of leopard frogs was lower when exposed to NaCl compared to wastewater. However, growth effects were similar between wastewater and NaCl for chorus frogs. Taken together, our results suggest that previous studies on effects of road salt could inform future studies and management of wastewater-contaminated ecosystems, and vice versa. Nevertheless, effects of road salts and wastewaters may be context-, species-, and trait-specific and require further investigations. The negative influence of salts on imperiled amphibians underscores the need to restore landscapes with increased salinity and reduce future salinization of freshwater ecosystems.

Aquatic Toxicology↗

USGS2015

Statistical guidelines for assessing marine avian hotspots and coldspots: A case study on wind energy development in the U.S. Atlantic Ocean

Estimating patterns of habitat use is challenging for marine avian species because seabirds tend to aggregate in large groups and it can be difficult to locate both individuals and groups in vast marine environments. We developed an approach to estimate the statistical power of discrete survey events to identify species-specific hotspots and coldspots of long-term seabird abundance in marine environments. We illustrate our approach using historical seabird data from survey transects in the U.S. Atlantic Ocean Outer Continental Shelf (OCS), an area that has been divided into “lease blocks” for proposed offshore wind energy development. For our power analysis, we examined whether discrete lease blocks within the region could be defined as hotspots (3 × mean abundance in the OCS) or coldspots (1/3 ×) for individual species within a given season. For each of 74 species/season combinations, we determined which of eight candidate statistical distributions (ranging in their degree of skewedness) best fit the count data. We then used the selected distribution and estimates of regional prevalence to calculate and map statistical power to detect hotspots and coldspots, and estimate the p -value from Monte Carlo significance tests that specific lease blocks are in fact hotspots or coldspots relative to regional average abundance. The power to detect species-specific hotspots was higher than that of coldspots for most species because species-specific prevalence was relatively low (mean: 0.111; SD: 0.110). The number of surveys required for adequate power (> 0.6) was large for most species (tens to hundreds) using this hotspot definition. Regulators may need to accept higher proportional effect sizes, combine species into groups, and/or broaden the spatial scale by combining lease blocks in order to determine optimal placement of wind farms. Our power analysis approach provides a general framework for both retrospective analyses and future avian survey design and is applicable to a broad range of research and conservation problems.

U.S. Atlantic Ocean Outer Continental Shelf↗

USGS2018

Effects of persistent energy-related brine contamination on amphibian abundance in national wildlife refuge wetlands

To inform sustainable energy development, it is important to understand the ecological effects of historical and current production practices and the persistence of those effects. The Williston Basin is one of North America's largest oil production areas and overlaps the Prairie Pothole Region, an area densely populated with wetlands that provide important wildlife habitat. Although historical disposal practices that released chloride-rich waters (brines) produced during oil extraction into the environment are no longer used, brine spills still occur frequently. We sampled 33 wetlands for three amphibian species in Montana and North Dakota during 2015–2017, primarily on National Wildlife Refuges, and used N-mixture models to determine how abundance varied with evidence of brine contamination. To provide insight into effects of historical versus contemporary contamination, we also estimated the association of well density and age with water quality and amphibian abundance. Abundance of boreal chorus frog ( Pseudacris maculata ) larvae declined most rapidly in response to increased chloride (range: 0.04–17,500 mg/L), followed by the northern leopard frog ( Lithobates [ Rana ] pipiens ) and barred tiger salamander ( Ambystoma mavortium ). Water quality and population- and community-level abundance of amphibians were more strongly related to nearby wells (≤800 m) installed before 1982 than to wells installed since 1982. These results suggest historical brine management practices were the primary driver of contamination and reduced amphibian abundance in wetlands we sampled, reflecting multi-decadal ecological effects. These persistent effects also underscore the critical need for tools to restore landscapes affected by brine contamination.

Montana, North Dakota, South Dakota↗

USGS2005

Grassland bird response to harvesting switchgrass as a biomass energy crop

The combustion of perennial grass biomass to generate electricity may be a promising renewable energy option. Switchgrass (Panicum virgatum) grown as a biofuel has the potential to provide a cash crop for farmers and quality nesting cover for grassland birds. In southwestern Wisconsin (near lat. 42??52???, long. 90??08???), we investigated the impact of an August harvest of switchgrass for bioenergy on community composition and abundance of Wisconsin grassland bird species of management concern. Harvesting the switchgrass in August resulted in changes in vegetation structure and bird species composition the following nesting season. In harvested transects, residual vegetation was shorter and the litter layer was reduced in the year following harvest. Grassland bird species that preferred vegetation of short to moderate height and low to moderate density were found in harvested areas. Unharvested areas provided tall, dense vegetation structure that was especially attractive to tall-grass bird species, such as sedge wren (Cistothorus platensis) and Henslow's sparrow (Ammodramus henslowii). When considering wildlife habitat value in harvest management of switchgrass for biofuel, leaving some fields unharvested each year would be a good compromise, providing some habitat for a larger number of grassland bird species of management concern than if all fields were harvested annually. In areas where most idle grassland habitat present on the landscape is tallgrass, harvest of switchgrass for biofuel has the potential to increase the local diversity of grassland birds.

Biomass and Bioenergy↗

USGS2009

Strontium isotope record of seasonal scale variations in sediment sources and accumulation in low-energy, subtidal areas of the lower Hudson River estuary

Strontium isotope ( 87 Sr/ 86 Sr) profiles in sediment cores collected from two subtidal harbor slips in the lower Hudson River estuary in October 2001 exhibit regular patterns of variability with depth. Using additional evidence from sediment Ca/Sr ratios, 137 Cs activity and Al, carbonate (CaCO 3 ), and organic carbon (OC sed ) concentration profiles, it can be shown that the observed variability reflects differences in the relative input and trapping of fine-grained sediment from seaward sources vs. landward sources linked to seasonal-scale changes in freshwater flow. During high flow conditions, the geochemical data indicate that most of the fine-grained sediments trapped in the estuary are newly eroded basin materials. During lower (base) flow conditions, a higher fraction of mature materials from seaward sources with higher carbonate content is trapped in the lower estuary. Results show that high-resolution, multi-geochemical tracer approaches utilizing strontium isotope ratios ( 87 Sr/ 86 Sr) can distinguish sediment sources and constrain seasonal scale variations in sediment trapping and accumulation in dynamic estuarine environments. Low-energy, subtidal areas such as those in this study are important sinks for metastable, short-to-medium time scale sediment accumulation. These results also show that these same areas can serve as natural recorders of physical, chemical, and biological processes that affect particle and particle-associated material dynamics over seasonal-to-yearly time scales. ?? 2009.

Chemical Geology↗

USGS2014

Dendrochemical patterns of calcium, zinc, and potassium related to internal factors detected by energy dispersive X-ray fluorescence (EDXRF)

Energy dispersive X-ray fluorescence (EDXRF) provides highly sensitive and precise spatial resolution of cation content in individual annual growth rings in trees. The sensitivity and precision have prompted successful applications to forensic dendrochemistry and the timing of environmental releases of contaminants. These applications have highlighted the need to distinguish dendrochemical effects of internal processes from environmental contamination. Calcium, potassium, and zinc are three marker cations that illustrate the influence of these processes. We found changes in cation chemistry in tree rings potentially due to biomineralization, development of cracks or checks, heartwood/sapwood differentiation, intra-annual processes, and compartmentalization of infection. Distinguishing internal from external processes that affect dendrochemistry will enhance the value of EDXRF for both physiological and forensic investigations.

Chemosphere↗