USGS Science⌕ Search

SEARCH · USGS Science

Results for “Earth in Space”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25Linked to original sources
USGS2012

Implications of regional gravity for state of stress in the earth's crust and upper mantle

Topography is maintained by stress differences within the earth. Depending on the distribution of the stress we classify the support as either local or regional compensation. In general, the stresses implied in a regional compensation scheme are an order of magnitude larger than those corresponding to local isostasy. Gravity anomalies, a measure of the earth's departure from hydrostatic equilibrium, can be used to distinguish between the two compensation mechanisms and thus to estimate the magnitude of deviatoric stress in the crust and upper mantle. Topography created at an oceanic ridge crest or in a major continental orogenic zone appears to be locally compensated. Such features were formed on weak crust incapable of maintaining stress differences much greater than the stress from the applied load. Oceanic volcanoes formed on an already cooled, thickened lithosphere are regionally supported with elastic stresses. Similarly, the broad topographic rise seaward of subduction zones is elastically supported as the lithosphere is bent near the plate margin. Although the implied stress is to some degree dependent on the rheological model assumed, the gravity anomalies and surface deformation produced by these features demonstrate that the upper 30–40 km of the oceanic lithosphere is capable of regionally supporting stress differences in the 100-MPa range. Given certain conditions of load emplacement, continental crust can also support loads regionally over 100-m.y. time scales, but the effects of erosion only allow an estimate of a lower bound on stress. Data from space probes indicate that the upper layers of other terrestrial planets also support topographic-induced stress differences in excess of 100 MPa.

Journal of Geophysical Research Solid Earth↗
USGS2022

Acquisition of Moon measurements by Earth orbiting sensors for lunar calibration

The reflected light from the Moon can be utilized as a reference for radiometric calibration by employing a model to generate reference values corresponding to the Moon observations made by instruments. Using a calibration target that is outside the atmosphere provides a distinct advantage for space-based instruments; however, the lunar irradiance sensed by satellite instruments naturally changes as the host spacecraft traverses its orbit. This article presents a study of the potential impact on lunar radiometric measurements due to their acquisition from an orbiting platform. A simulation of a Sun-synchronous orbit was coupled to the U.S. Geological Survey (USGS) lunar model to generate predicted irradiances for points along orbit passes through several lunations. These irradiance values exhibit variations tied to the spacecraft motion, arising primarily from changes in the Moon-sensor distance and the phase angle. The two effects are similar in overall magnitude, but their respective contributions depend on the time of month and the orbit. Relative changes in irradiance mostly fall within an envelope of ±0.006% per second, except at the smallest phase angles. These studies enable planning space-based Moon observations to minimize the change in the target irradiance, an important consideration for measurements acquired for radiometric characterization of the Moon.

IEEE Transactions on Geoscience and Remote Sensing↗
USGS1988

Measuring contemporary crustal motions; NASA’s Crustal Dynamics Project

In the early and middle 1970's, two new space-based geodetic techniques became available that offered unprecedented accuracy in the measurement of distances over long baselines. As described below, Satellite Laser Ranging (SLR) and Very Long Baseline Interferometry (VLBI) provided a capability to determine in relatively short periods of time the inter-site distance between two observing stations to a level of several centimeters, even if they were separated by thousands or tens of thousands of kilometers. During the 1980's the two techniques have evolved to the point where baselines can now be routinely measured to a level below one centimeter. This is a tenfold improvement in about ten years. Perhaps more important than providing the measurement capability are the consequences of this capability when applied over a few years: the motion of any one site with respect to another can be monitored at the level of better than a cm/yr. This has made possible, for the first time, direct measurement of the motion of the Earth's tectonic plates and of the deformation of its crust in active plate boundary regions. Because such measurements have the potential for providing important information on the mechanisms that drive plates and cause them to slip during earthquakes, a coordinated federal program for the application of this space technology to crustal dynamics and earthquake research was established in 1979. The participating agencies were the National Aeronautics and Space Administration (NASA), the National Oceanic and Atmospheric Administration (NOAA), the United States Geological Survey (USGS), the National Science Foundation (NSF), and the Defense Mapping Agency. NASA formed the Crustal Dynamics Project to further develop the SLR and VLBI techniques, to implement global networks of stations with the cooperation of many different countries, and to conduct measurements of plate motions and regional deformations. this project has grown into an international effort to collect information directly relevant to understanding the threat of the earthquake hazard as well as fundamental research about the crust and upper mantle. In this article we describe briefly the two space geodetic techniques and how they are used by the Crustal Dynamics Project, show some of the very exciting results that have emerged at the halfway point in the project's life, describe the availability and utilization of the data being collected, and consider what the future may hold when measurement accuracies eventually exceed even those now available and when other international groups become more heavily involved.

Earthquakes & Volcanoes (USGS)↗
USGS2009

The National Map - Elevation

The National Elevation Dataset (NED) is the primary elevation data product produced and distributed by the USGS. The NED provides seamless raster elevation data of the conterminous United States, Alaska, Hawaii, and the island territories. The NED is derived from diverse source data sets that are processed to a specification with a consistent resolution, coordinate system, elevation units, and horizontal and vertical datums. The NED is the logical result of the maturation of the long-standing USGS elevation program, which for many years concentrated on production of topographic map quadrangle-based digital elevation models. The NED serves as the elevation layer of The National Map, and provides basic elevation information for earth science studies and mapping applications in the United States. The NED is a multi-resolution dataset that is updated bimonthly to integrate newly available, improved elevation source data. NED data are available nationally at grid spacings of 1 arc-second (approximately 30 meters) for the conterminous United States, and at 1/3 and 1/9 arc-seconds (approximately 10 and 3 meters, respectively) for parts of the United States. Most of the NED for Alaska is available at 2-arc-second (about 60 meters) grid spacing, where only lower resolution source data exist. Part of Alaska is available at the 1/3-arc-second resolution, and plans are in development for a significant upgrade in elevation data coverage of the State over the next 5 years. Specifications for the NED include the following: *Coordinate system: Geographic (decimal degrees of latitude and longitude), *Horizontal datum: North American Datum of 1983 (NAD 83), *Vertical datum: North American Vertical Datum of 1988 (NAVD 88) over the conterminous United States and varies in other areas, and *Elevation units: Decimal meters.

Fact Sheet↗
USGS2001

Paleoclimate concepts

Interpretation of paleoclimate records requires an understanding of Earth’s climate system, the causes (forcings) of climate changes, and the processes that amplify (positive feedback) or damp (negative feedback) these changes. Paleoclimatologists reconstruct the history of climate from proxies, which are those characteristics of sedimentary deposits that preserve paleoclimate information. A great range of physical, chemical, isotopic, and biological characteristics of lake and ocean sediments, ice cores, cave formations, tree rings, the land surface itself, and more are used to reconstruct past climate. Ages of climate events are obtained by counting annual layers, measuring effects of the decay of radioactive atoms, assessing other changes that accumulate through time at rates that can be assessed accurately, and using time-markers to correlate sediments with others that have had their ages measured more accurately. Not all questions about the history of Earth’s climate can be answered through paleoclimatology: in some cases the necessary sediments are not preserved, or the climatic variable of interest is not recorded in the sediments. Nonetheless, many questions can be answered from the available information. An overview of the history of Arctic climate during the past 65 million years (m.y.) shows a long-term irregular cooling for tens of millions of years. As ice became established in the Arctic, it grew and shrank for tens of thousands of years in regular cycles. During at least the most recent of these cycles, shorter lived, large, and rapid fluctuations occurred, especially around the North Atlantic Ocean. The last 11,000 years or so have remained generally warm and relatively stable, but with small climate changes of varying spacing and size. Assessment of the causes of climate changes, and the records of those causes, shows that reduction in atmospheric carbon-dioxide concentration and changes in continental positions were important in the cooling trend throughout tens of millions of years. The cycling in ice extent was paced by features of Earth’s orbit and amplified by the effects of the ice itself, changes in carbon dioxide and other greenhouse gases, and additional feedbacks. Abrupt climate changes were linked to changes in the circulation of the ocean and the extent of sea ice. Changes in the Sun’s output and in Earth’s orbit, volcanic eruptions, and other factors have contributed to the natural climate changes since the end of the last ice age.

Book chapter↗
USGS1977

10. The surface and interior of venus

Present ideas about the surface and interior of Venus are based on data obtained from (1) Earth-based radio and radar: temperature, rotation, shape, and topography; (2) fly-by and orbiting spacecraft: gravity and magnetic fields; and (3) landers: winds, local structure, gamma radiation. Surface features, including large basins, crater-like depressions, and a linear valley, have been recognized from recent ground-based radar images. Pictures of the surface acquired by the USSR's Venera 9 and 10 show abundant boulders and apparent wind erosion. On the Pioneer Venus 1978 Orbiter mission, the radar mapper experiment will determine surface heights, dielectric constant values and small-scale slope values along the sub-orbital track between 50??S and 75??N. This experiment will also estimate the global shape and provide coarse radar images (40-80 km identification resolution) of part of the surface. Gravity data will be obtained by radio tracking. Maps combining radar altimetry with spacecraft and ground-based images will be made. A fluxgate magnetometer will measure the magnetic fields around Venus. The radar and gravity data will provide clues to the level of crustal differentiation and tectonic activity. The magnetometer will determine the field variations accurately. Data from the combined experiments may constrain the dynamo mechanism; if so, a deeper understanding of both Venus and Earth will be gained. ?? 1977 D. Reidel Publishing Company.

Space Science Reviews↗
USGS1985

More on the alleged 1970 geomagnetic jerk

French and United Kingdom workers have published reports describing a sudden change in the secular acceleration, called an impulse or a jerk, which took place around 1970. They claim that this change took place in a period of a year or two and that the sources of the alleged jerk are internal. An earlier paper by this author questioned their method of analysis pointing out that their method of piecemeal fitting of parabolas to the data will always create a discontinuity in the secular acceleration where the parabolas join and that the place where the parabolas join is an a priori assumption and not a result of the analysis. This paper gives a very brief summary of this first paper and then adds additional reasons for questioning the allegation that there was a worldwide sudden jerk in the magnetic field of internal origin around 1970. These new reasons are based largely on new field models which give cubic approximations of the field right through the 1970 timeframe and therefore have no discontinuities in the second derivative (jerk) around 1970. Some recent Japanese work shows several sudden changes in the secular variation pattern which cover limited areas and do not seem to be closely related to each other or to the irregularity noted in the European area near 1970. The secular variation picture which seems to be emerging is one with many local or limited-regional secular variation changes which appear to be almost unrelated to each other in time or space. A worldwide spherical harmonic model including coefficients up to degree 13 could never properly depict such a situation. ?? 1985.

Physics of the Earth and Planetary Interiors↗
USGS2017

Refining fault slip rates using multiple displaced terrace risers-An example from the Honey Lake fault, NE California, USA

Faulted terrace risers are semi-planar features commonly used to constrain Quaternary slip rates along strike-slip faults . These landforms are difficult to date directly and therefore their ages are commonly bracketed by age estimates of the adjacent upper and lower terrace surfaces. However, substantial differences in the ages of the upper and lower terrace surfaces (a factor of 2.4 difference observed globally) produce large uncertainties in the slip-rate estimate. In this investigation, we explore how the full range of displacements and bounding ages from multiple faulted terrace risers can be combined to yield a more accurate fault slip rate. We use 0.25-m cell size digital terrain models derived from airborne lidar data to analyze three sites where terrace risers are offset right-laterally by the Honey Lake fault in NE California, USA. We use ages for locally extensive subhorizontal surfaces to bracket the time of riser formation: an upper surface is the bed of abandoned Lake Lahontan having an age of 15.8 ± 0.6 ka and a lower surface is a fluvial terrace abandoned at 4.7 ± 0.1 ka. We estimate lateral offsets of the risers ranging between 6.6 and 28.3 m (median values), a greater than fourfold difference in values. The amount of offset corresponds to the riser's position relative to modern stream meanders: the smallest offset is in a meander cutbank position, whereas the larger offsets are in straight channel or meander point-bar positions. Taken in isolation, the individual terrace-riser offsets yield slip rates ranging from 0.3 to 7.1 mm/a. However, when the offset values are collectively assessed in a probabilistic framework, we find that a uniform (linear) slip rate of 1.6 mm/a (1.4–1.9 mm/a at 95% confidence) can satisfy the data, within their respective uncertainties. This investigation demonstrates that integrating observations of multiple offset elements (crest, midpoint, and base) from numerous faulted and dated terrace risers at closely spaced sites can refine slip-rate estimates on strike-slip faults.

California↗
USGS1979

Digital image processing system For Landsat 3

The Department of Interior (DOI) and the National Aeronautics and Space Administration (NASA) have entered into a joint program to provide a digital image processing system in support of the Landsat 3 mission. NASA will provide the data reception and pre-processing facilities, while the DOI provides the production image processing system that generates film products and computer compatible tapes for users. The system procured by the DOI's U.S. Geological Survey was installed at the Earth Resources Observation System Data Center (EDC) in Sioux Falls, South Dakota. The EDC Digital Image Processing System (EDIPS) is capable of operating in standard or special formats. During 13 hours of operation, the system can process up to 200 five-band Multispectral Scanner (MSS) scenes and 160 Return Beam Vidicon (RBV) subscenes in the standard mode plus up to 60 scenes/subscenes in the special-order mode. The input media for the system are High Density Tapes (HDT's) generated by NASA's Goddard Space Flight Center (GSFC). These tapes contain two types of data: those that have been radiometrically and geometrically corrected with resampling of the data to fit a known map projection, and those that have been radiometrically corrected but have not been geometrically corrected or resampled. The system can provide 185 mm (MSS) and 198 mm (RBV) black and white film products for each MSS band or RBV subscene via a high resolution laser beam recorder. The CCT's generated by the system are compatible with the HDT format, and are available either in Band Sequential (BSQ) or Band Interleaved by Line (BIL) data. This paper will present both an overview of the total NASA/DOI system and a detailed discussion of the EDC Digital Image Processing System that is installed at the USGS facility in Sioux Falls, South Dakota.

South Dakota↗
USGS1988

The geometric signature: Quantifying landslide-terrain types from digital elevation models

Topography of various types and scales can be fingerprinted by computer analysis of altitude matrices (digital elevation models, or DEMs). The critical analytic tool is the geometric signature, a set of measures that describes topographic form well enough to distinguish among geomorphically disparate landscapes. Different surficial processes create topography with diagnostic forms that are recognizable in the field. The geometric signature abstracts those forms from contour maps or their DEMs and expresses them numerically. This multivariate characterization enables once-in-tractable problems to be addressed. The measures that constitute a geometric signature express different but complementary attributes of topographic form. Most parameters used here are statistical estimates of central tendency and dispersion for five major categories of terrain geometry; altitude, altitude variance spectrum, slope between slope reversals, and slope and its curvature at fixed slope lengths. As an experimental application of geometric signatures, two mapped terrain types associated with different processes of shallow landsliding in Marin County, California, were distinguished consistently by a 17-variable description of topography from 21??21 DEMs (30-m grid spacing). The small matrix is a statistical window that can be used to scan large DEMs by computer, thus potentially automating the mapping of contrasting terrain types. The two types in Marin County host either (1) slow slides: earth flows and slump-earth flows, or (2) rapid flows: debris avalanches and debris flows. The signature approach should adapt to terrain taxonomy and mapping in other areas, where conditions differ from those in Central California. ?? 1988 International Association for Mathematical Geology.

Mathematical Geology↗
USGS2025

Drone-based radiometric surveys provide high-resolution mine waste characterization

Airborne radiometric surveys use passive geophysical techniques to characterize geochemical variations at or near earth’s surface. These methods have been used for a variety of mapping applications, including mineral resource evaluation. However, detailed characterization of smaller geologic targets, including mine waste features, requires flying at lower altitudes and with tighter line spacing than is feasible with traditional aircraft. Here, a small uncrewed aircraft system (sUAS) equipped with a radiometric sensor was used to acquire high-resolution gamma-spectrometry over small mine waste features and a low-grade stockpile in southwestern New Mexico. The sUAS radiometric system mapped local variability within each survey area and revealed ~2–10 m wide zones where radioelements K, Th, and U may be elevated 2–10× the surrounding material. Additionally, the sUAS radiometric data revealed radioelement variability across survey sites, which correlated reasonably well with variability seen in geochemical samples at each survey site, even though samples collected from individual sites showed high local variability. The sUAS data characterized local heterogeneity within mine waste and other small geologic targets at scales of a few meters to tens of meters, which is not possible with traditional crewed aircraft, and with continuity of coverage that is not possible with ground surveys, thus filling a key gap in geophysical survey spatial resolution.

New Mexico↗
USGS2015

Cokriging of compositional balances including a dimension reduction and retrieval of original units

Compositional data constitutes a special class of quantitative measurements involving parts of a whole. The sample space has an algebraic-geometric structure different from that of real-valued data. A subcomposition is a subset of all possible parts. When compositional data values include geographical locations, they are also regionalized variables. In the Earth sciences, geochemical analyses are a common form of regionalized compositional data. Ordinarily, there are measurements only at data locations. Geostatistics has proven to be the standard for spatial estimation of regionalized variables but, in general, the compositional character of the geochemical data has been ignored. This paper presents in detail an application of cokriging for the modelling of compositional data using a method that is consistent with the compositional character of the data. The uncertainty is evaluated by a Monte Carlo procedure. The method is illustrated for the contents of arsenic and iron in groundwaters in Bangladesh, which have the peculiarity of being measured in milligrams per litre, units for which the sum of all parts does not add to a constant. Practical results include maps of estimates of the geochemical elements in the original concentration units, as well as measures of uncertainty, such as the probability that the concentration may exceed a given threshold. Results indicate that probabilities of exceedance in previous studies of the same data are too low.

Journal of the Southern African Institute of Minin↗
USGS2022

The future of coastal monitoring through satellite remote sensing

Satellite remote sensing is transforming coastal science from a “data-poor” field into a “data-rich” field. Sandy beaches are dynamic landscapes that change in response to long-term pressures, short-term pulses, and anthropogenic interventions. Until recently, the rate and breadth of beach change have outpaced our ability to monitor those changes, due to the spatiotemporal limitations of our observational capacity. Over the past several decades, only a handful of beaches worldwide have been regularly monitored with accurate yet expensive in situ surveys. The long-term coastal-change data of these few well-monitored beaches have led to in-depth understanding of many site-specific coastal processes. However, because the best-monitored beaches are not representative of all beaches, much remains unknown about the processes and fate of the other >99% of unmonitored beaches worldwide. The fleet of Earth-observing satellites has enabled multiscale monitoring of beaches, for the very first time, by providing imagery with global coverage and up to daily frequency. The long-standing and ever-expanding archive of satellite imagery will enable coastal scientists to investigate coastal change at sites vulnerable to future sea-level rise, that is, (almost) everywhere. In the past decade, our capability to observe coastal change from space has grown substantially with computing and algorithmic power. Yet, further advances are needed in automating monitoring using machine learning, deep learning, and computer vision to fully leverage this massive treasure trove of data. Extensive monitoring and investigation of the causes and effects of coastal change at the requisite spatiotemporal scales will provide coastal managers with additional, valuable information to evaluate problems and solutions, addressing the potential for widespread beach loss due to accelerated sea-level rise, development, and reduced sediment supply. Monitoring from Earth-observing satellites is currently the only means of providing seamless data with high spatiotemporal resolution at the global scale of the impending impacts of climate change on coastal systems.

Cambridge Prisms: Coastal Futures↗
USGS2009

EAARL Coastal Topography-Pearl River Delta 2008: Bare Earth

These remotely sensed, geographically referenced elevation measurements of Lidar-derived bare earth (BE) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the University of New Orleans (UNO), Pontchartrain Institute for Environmental Sciences (PIES), New Orleans, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the Pearl River Delta in Louisiana and Mississippi, acquired March 9-11, 2008. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Data Series↗
USGS2010

EAARL Coastal Topography-Mississippi and Alabama Barrier Islands, Post-Hurricane Gustav, 2008

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the Mississippi and Alabama barrier islands, acquired post-Hurricane Gustav (September 2008 hurricane) on September 8, 2008. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2019

Intensity and impact of the New York Railroad superstorm of May 1921

Analysis is made of low‐latitude ground‐based magnetometer data recording the magnetic superstorm of May 1921. By inference, the storm was driven by a series of interplanetary coronal mass ejections, one of which produced a maximum pressure on the magnetopause of ~64.5 nPa, sufficient to compress the subsolar magnetopause radius to ~5.3 Earth radii. Over the course of the storm, low‐latitude geomagnetic disturbance exhibited extreme local time (longitude) asymmetry that can be attributed to substorm disturbance extending to low latitudes. The storm attained an estimated maximum − Dst on 15 May of 907 ± 132 nT, an intensity comparable to that of the Carrington event of 1859. The May 1921 storm brought spectacular aurorae to the nighttime sky. It also interfered with and damaged telephone and telegraph systems associated with railroad systems in New York City and State. These later effects were due to a combination of three factors: the localized details of geomagnetic vector disturbance, the geographic expression of the Earth's surface impedance tensor, and the configurations and physical parameters of the electrical networks of the day.

New York↗
USGS2009

EAARL topography - George Washington Birthplace National Monument 2008

These remotely sensed, geographically referenced elevation measurements of Lidar-derived bare earth (BE) and first surface (FS) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the George Washington Birthplace National Monument in Virginia, acquired on March 26, 2008. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL) was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is routinely used to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Virginia↗
USGS2024

Global variability of the composition and temperature at the 410-km discontinuity from receiver function analysis of dense arrays

Seismic boundaries caused by phase transitions between olivine polymorphs in Earth's mantle provide thermal and compositional markers that inform mantle dynamics. Seismic studies of the mantle transition zone often use either global averaging with sparse arrays or regional sampling from a single dense array. The intermediate approach of this study utilizes many densely spaced seismic arrays distributed around the globe. We systematically compute teleseismic P-to-S receiver functions for each seismic array and invert for the 1-D seismic velocity structure of the mantle transition zone beneath each array to facilitate a comparison between densely sampled regions. We stack 3,600 receiver functions on average at 67 arrays in total. The stack is used in a probabilistic inversion to estimate the mantle transition zone interface depths and velocities beneath each array. We focus on the 410-km discontinuity (410) because it is a prominent seismic interface that is clearly linked to a single mineral phase transition between olivine and wadsleyite. The depths and velocity contrasts of the 410 are mapped to temperatures and compositions using mineral physics constraints. The depth of the 410 ranges from ∼405–440 km, which is consistent with a ∼360 K temperature range in a dry mantle and a ∼260 K temperature range in a wet mantle (2 wt. % water). The Vs contrast across the 410 ranges from ∼2.5–8 %, which is consistent with ∼20–70 vol. % olivine composition in a dry mantle and ∼25–80 vol. % in a wet mantle. The bulk composition of the upper mantle near the 410-km discontinuity is typically considered to be well-mixed because there is no thermodynamic impediment to convection at the olivine to wadsleyite phase transition. However, the wide range of inferred olivine content from our study suggests that there are large lateral variations in the bulk composition of the upper mantle near the 410-km discontinuity.

Earth and Planetary Science Letters↗