USGS Science⌕ Search

SEARCH · USGS Science

Results for “Arizona Geological Survey Contributed Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,128 records · Page 25Linked to original sources
USGS2024

Estimating groundwater level records using MOVE.1 and computing monthly percentiles from estimated groundwater records in Massachusetts

The U.S. Geological Survey, in cooperation with the Massachusetts Department of Environmental Protection, performed record extensions on groundwater levels at select wells using the Maintenance of Variance Extension type 1 (MOVE.1) method. The groundwater levels estimated from these record extensions were used to compute monthly percentiles to improve future determinations of a groundwater index. In Massachusetts, 27 of 29 short-record study wells with continuous groundwater levels between 0.8 and 8.1 years were suitable for record extensions; 37 long-record index wells were used to extend the groundwater level records at the study wells. The index well selected to pair with a study well was chosen based on Pearson correlation coefficient values; cross-correlation between the two wells; geologic and topographic similarity; and smallest distance spanning the wells. Each study well and its corresponding index well have 1 or more years of concurrent, overlapping data; a Pearson correlation coefficient that exceeded a threshold value of 0.8; and a similar aquifer type and hydrologic characteristics. Of the 29 study wells, 2 showed poor correlations with all index wells and were not considered for record extensions. Performance metrics used to assess the accuracy of the MOVE.1 models indicated that most models provided reasonable estimates of groundwater levels. Root mean square error values ranged from 0.097 to 2.292 feet, with a median of 0.536 foot. Nash-Sutcliffe efficiency coefficient values ranged from 0.623 to 0.996, with a median value of 0.759. Generally, study wells in close geographical proximity to their index well resulted in stronger model performance. The average length of groundwater level records was extended by 14.1 years to a new average of 18.1 years. The estimated groundwater level records from the MOVE.1 models resulted in an increase in the range of highest and lowest groundwater levels at 23 of 27 wells. The increase in range of groundwater levels was between 0.08 to 7.95 feet. Monthly percentiles for State drought indices were computed from the estimated MOVE.1 records and observed records through December 31, 2021. Percentiles computed from estimated records show an average groundwater level about 1.0 foot lower than observed data at the 2d percentile and 0.1 foot lower at the 30th percentile.

Massachusetts↗
USGS2025

Uncertainty reduction for subaerial landslide-tsunami hazards

Subaerial rock slopes may generate a tsunami by rapidly moving into the water. Large uncertainty in landslide characteristics propagates into large uncertainty in tsunami hazard, making hazard assessment more difficult for land and emergency managers. Once a potentially tsunamigenic landslide is identified, it may not be clear which landslide characteristics contribute most significantly to uncertainty in the tsunami hazard. Our aim is to document the relative worth of different landslide characteristics (e.g., size, material properties) for reducing uncertainty in landslide-tsunami hazard assessments. Isolating the relative importance of specific landslide characteristics may inform prioritization of data collection and improve efficiency in understanding hazard. To accomplish this, we generated a set of 288 landslide-tsunami simulations in which we systematically varied the size and material properties of possible failure extents at the Barry Arm landslide complex in northwestern Prince William Sound, Alaska, USA. We find that for landslides smaller than the receiving waterbody, the landslide volume has the strongest effect on resulting wave characteristics and thus the highest leverage on reducing uncertainty in tsunami hazard. In contrast, for landslides substantially larger than the waterbody, the duration of rapid movement of the landslide has the highest leverage. Based on our results, we propose a classification scheme for subaerial landslides based on the relative size of the landslide and waterbody. Additionally, our results support the generation of a tsunami height transfer function between existing tide gages and a nearby coastal city. These results have direct implications for the practice of operational early warning.

Alaska↗
USGS2026

Deaf, deafblind, and hard of hearing university student experiences with earthquake early warning in the United States: Evaluating language planning and technology access

The growing literature on deaf and hard of hearing (DHH+) populations and disasters demonstrates that emergency communication (including alerts) is not reaching global DHH + individuals with dangerous impacts for morbidity and mortality. This is the first research study in the U.S. to qualitatively explore the experiences of DHH + persons with earthquake early warning (EEW) through group-based dialogue sessions. The study investigates eight DHH + university students'past earthquake experiences, access to EEW alerts, and perceptions of ShakeAlert Ⓡ , an EEW system for detecting earthquakes and alerting residents of California, Oregon, and Washington. Findings highlight key gaps in disaster alert usability within four thematic areas: lack of messaging in participants' language(s), unclear alert messaging, deficient message delivery mechanisms for deafblind persons, and insufficient access to earthquake information and training that leads to dependence on informal information networks. Weaknesses identified in these four themes reduce DHH + trust in EEW systems and compromise the capacity of alert recipients to take swift protective action or to mentally prepare before shaking starts. The study also underscores structural factors such as insufficient linguistic representation in disaster language planning and technology design, which ignores the linguistic and sensory access needs of DHH + individuals. Building on disaster language planning frameworks, we recommend involving DHH + populations to co-develop EEW alerts. By centering DHH + perspectives, this research contributes to ongoing efforts to ensure that EEW systems reach everyone.

California↗
USGS2025

Comparisons of shoreline positions from satellite-derived and traditional field- and remote-sensing techniques

Satellite-derived shorelines (SDS) have the potential to help researchers answer critical coastal science questions and support work to predict coastal change by filling in the spatial and temporal gaps present in current field-based and remote-sensing data collection methods. The U.S. Geological Survey conducted comparison analyses of traditionally sourced shorelines and SDS in diverse coastal landscapes to determine how SDS could be used in ongoing and future work across varied coastal environments and provided some initial findings that could be used for implementation. Using CoastSeg, a browser-based program for SDS detection and mapping, SDS for the period 1984–2023 for multiple locations across the United States were compared to shoreline positions from traditionally sourced shoreline data. In this report, the authors present these comparisons alongside lessons learned and challenges encountered when building SDS workflows in different coastal locations. Results show that individual SDS have larger uncertainty and yet produced similar linear trends to sparser, traditionally sourced shoreline data; because SDS methods provide orders of magnitude more data than traditional shoreline-detection methods, they can be used to evaluate shoreline behaviors. Refining average scalar slopes used in tidal corrections did not result in substantial decreases in uncertainty. Using lessons from this work to outline needs for regional implementation, initial setup time would be considerable, being on the order of weeks. However, once complete, shoreline detections and analyses are fast (on the order of minutes to hours) and achievable using a desktop computer.

Alaska, Florida, Massachusetts, Washington↗
USGS1998

Design, revisions, and considerations for continued use of a ground-water-flow model of the coastal plain aquifer system in Virginia

A digital numerical model of the ground-water-flow system in the Virginia Coastal Plain was constructed as part of the Regional Aquifer System Analysis program of the U.S. Geological Survey and subsequently revised based on reinterpretations of the hydrogeologic framework. The revised model has been incorporated by the Virginia Department of Environmental Quality as a means to evaluate the effects of existing and proposed ground-water withdrawals. The revised model, which is documented here, includes many design features of the original model. Principal modifications are (1) reassignment of some model layers to represent different aquifers, (2) replacement of applied recharge and the uppermost surface-water layer by constant-head cells to represent the unconfined aquifer, and (3) revision of the lateral extents and transmissivity and vertical leakance values assigned to model layers. Ground-water levels simulated by the revised model under steady-state conditions, using withdrawal rates representing the period 1978-80, generally are similar to the water levels simulated by the original model under transient conditions using the same withdrawal rates. Differences probably result largely from changes in transmissivity and vertical leakance values. T he revised model enables the continued evaluation of development of the large and complex aquifer system. Improved information on parts of some aquifers has been incorporated. Only large, regional-scale trends in ground-water water levels, flow directions, and flow rates are simulated, however, and not local trends and (or) short-term changes in water level and flow. Changing hydraulic stresses, knowledge of hydrogeologic conditions, and resource-management needs require periodic revision of the model to maintain its usefulness for the management of ground-water resources in the Virginia Coastal Plain.

Virginia↗
USGS1999

Water-quality assessment of the New England coastal basins in Maine, Massachusetts, New Hampshire, and Rhode Island: Environmental settings and implications for water quality and aquatic biota

The New England Coastal Basins in Maine, Massachusetts, New Hampshire, and Rhode Island constitute one of 59 study units selected for water-quality assessment as part of the U.S. Geological Survey's National Water-Quality Assessment (NAWQA) program. England Coastal Basins study unit encompasses the fresh surface waters and ground waters in a 23,000 square-mile area that drains to the Atlantic Ocean. Major basins include those of the Kennebec, Androscoggin, Saco, Merrimack, Charles, Blackstone, Taunton, and Pawcatuck Rivers. Defining the environmental setting of the study unit is the first step in designing and conducting a multi-disciplinary regional water-quality assessment. The report describes the natural and human factors that affect water quality in the basins and includes descriptions of the physiography, climate, geology, soils, surface- and ground-water hydrology, land use, and the aquatic ecosystem. Although surface-water quality has greatly improved over the past 30 years as a result of improved wastewater treatment at municipal and industrial wastewater facilities, a number of water-quality problems remain. Industrial and municipal wastewater discharges, combined sewer overflows, hydrologic modifications from dams and water diversions, and runoff from urban land use are the major causes of water-quality degradation in 1998. The most frequently detected contaminants in ground water in the study area are volatile organic compounds, petroleum-related products, nitrates, and chloride and sodium. Sources of these contaminants include leaking storage tanks, accidental spills, landfills, road salting, and septic systems and lagoons. Elevated concentrations of mercury are found in fish tissue from streams and lakes throughout the study area.

Maine, Massachusetts, New Hampshire, Rhode Island↗
USGS2025

Characterizing sedimentary organic carbon in a hydrothermal spreading center, the Escanaba Trough

Sediments in critical marine mineral environments are of wide importance due to their preservation of both marine minerals and organic carbon (OC) stocks. However, OC storage and cycling is often overlooked in mineral system studies. This work characterizes sedimentary OC within the Escanaba Trough, a hydrothermal sulfide system off the coast of northern California. By utilizing ROV-based push coring, we collected sediments near and far from high temperature, low temperature, and inactive vents. We applied a multipronged organic geochemical approach, measuring bulk sediment, OC fractions of varying labilities, and biomarkers to tease apart the storage, source, and cycling of OC within this complex system. In contrast to past work indicating a primarily terrestrial source to deeper, Pleistocene sediments, our results suggest a primarily marine source in surface sediments at least 50 m away from active venting. Near active venting, we see evidence of locally produced chemosynthetic OC in addition to the background marine source. This chemosynthetic OC appears to be rapidly remineralized and supports more complex deep-sea food webs compared to hemipelagic sites. Still, the greatest contribution of labile OC was observed at inactive vent sites, which we suggest is due to hydrothermal fluid alteration of more labile OC at actively venting sites. Depending on fluid temperature, hydrothermally altered OC is either preserved in the sediments as petroleum or migrated with fluid flow. Considering inactive sites are those most likely to be targeted by potential mining, we suggest additional studies could verify if these results apply at other sedimented seafloor massive sulfide systems.

California↗
USGS2024

Using geologic mapping to understand temporal and spatial relations of closely clustered to concurrent latest Holocene surface ruptures on two intersecting faults, south-central Mojave Desert, California

The Pinto Mountain Fault Zone (PMFZ) marks a major structural boundary between east-oriented sinistral faults of the eastern Transverse Ranges (to the south) and northwest-oriented dextral faults of the south-central Mojave Desert (to the north). These structural fault systems comprise sinistral and dextral deformational domains of the Eastern California Shear Zone (ECSZ) that intersect one another in the Copper Mountain and Twentynine Palms areas. The U.S. Geological Survey (USGS) is conducting detailed geologic mapping and geochronologic investigations designed to clarify geometric, kinematic, and temporal relations among the two domains, that are focused on the central portion of the left-lateral PMFZ near its intersection with the right-lateral Copper Mountain Fault (CMF) and Mesquite Lake Fault Zone (MLFZ).

California↗
USGS2024

Stream nitrate dynamics driven primarily by discharge and watershed physical and soil characteristics at intensively monitored sites: Insights from deep learning

We developed a suite of models using deep learning to make hindcast predictions of the 7‐day average backward‐looking nitrate concentration at 46 predominantly agricultural sites across the midwestern and eastern United States. The models used daily observations of discharge and meteorological variables and watershed attributes describing anthropogenic modification to hydrology, nitrogen application, climate, groundwater, land use, watershed physiographic attributes, and soils. Across all sites, discharge and watershed soil and physiographic attributes showed a strong influence on model performance. Analysis of drivers across sites revealed considerable regional differences related to controlling processes such as groundwater contributions. We tested several ways to pool data across sites to develop accurate models and make the most effective use of available data. Single‐site models, in which models are trained and tested at a single location, showed generally strong predictive performance (median Kling‐Gupta Efficiency = 0.66), and accuracy at poorly performing sites could be improved by grouping sites with similar characteristics. Developing a single model for all sites reduced performance at several locations with distinct characteristics, suggesting that there is a threshold of dissimilarity beyond which more data does not improve the model. While many deep learning studies have shown that national or even global models can outperform local models, it is not clear that this is true for water quality constituents. This study demonstrates how data can be combined effectively, using deep learning to develop accurate and interpretable models of instream nitrate at sites where varying processes are responsible for changes in nitrate concentration.

Water Resources Research↗
USGS1977

Leachate plumes in ground water from Babylon and Islip landfills, Long Island, New York

Landfills operated by the Towns of Babylon and Islip in southwest and central Suffolk County contain urban refuse, incinerated garbage, and scavenger (cesspool) waste; some industrial refuse is deposited at the Babylon site. The Islip landfill was started in 1933, the Babylon landfill in 1947. The landfills are in contact with and discharge leachate into the highly permeable upper glacial aquifer (hydraulic conducitvity 190 to 500 ft/d [feet per day]). The aquifer is 74 feet thick at the Babylon landfill and 170 feet thick at the Islip landfill. The leachate-enriched water occupies the entire thickness of the aquifer beneath both landfills, but hydrologic boundaries retard downward migration of the plumes to deeper aquifers. The Babylon plume is 1,900 feet wide at the landfill and narrows to about 700 feet near its terminus 10,000 feet from the landfill. The Islip plume is 1,400 feet wide at the landfill and narrows to 500 feet near its terminus 5,000 feet from the landfill. Hydrochemical maps and sections show the distribution of the major chemical constituents of the plumes. The most highly leachate-enriched ground water obtained was from the Babylon site; it contained 860 mg/L (milligrams per liter) sodium, 110 mg/L potassium, 565 mg/L calcium, 100 mg/L magnesium, 2,700 mg/L bicarbonate, and 1,300 mg/L chloride. Sulfate was notably absent or in low concentration in most parts of both plumes. Nitrogen in plume water was mostly in the form NH4+, and concentrations as high as 90 mg/L were found; concentrations of nitrogen as N in the plume were less than 10 mg/L. As much as 440 mg/L iron and 190 mg/L manganese were found in the leachate-enriched water. Samples were also tested for arsenic, boron, cadmium, cobalt, chromium, copper, mercury, nickel, lead, selenium, strontium, and zinc. Boron was more or less ubiquitous and was found in concentrations as high as 2 mg/L. Organic carbon was found in concentrations as high as 2,250 mg/L in the most highly leachate-enriched water but attenuated rapidly to less than 20 mg/L. Dissolved-solids concentrations near the landfills were between 400 and 3,000 mg/L at Babylon and between 500 and 1,500 mg/L at Islip. Ground-water temperatures near the landfills exceed those in ambient water by as much as 7°C at Babylon and 16°C at Islip. Heat contributed by the landfills was mostly dissipated within 0.4 mi of the landfill, butat Islip, the warm leachate-enriched water extended 0.5 mi downgradient. The entrance of leachate into the less dense ground water as pulsations after rainfall may explain the presence of high leachate enrichment near the bottom of the aquifer. A comparison of the physical characteristics of leachate-enriched ground water with those of ambient water suggests that the downward movement of leachate results from its greater density. Simulation of the movement and dispersion of the Babylon plume with a mathematical dispersion model indicated the coefficient of longitudinal dispersion to be about 60 ft 2 /d (feet squared per day) and the ground-water velocity to be 1 ft/d. However, the velocity determined from the hydraulic gradient and public-supply wells in the area was 4 ft/d, which would cause a plume four times as long as that predicted by the mathmatical dispersion model. At the Islip site, the plume was one-third the length calculated on the basis of the age of the landfill. The shortness of the plumes has not been explained; it may be a result of the leachate's having been too dilute to form a plume during the early years of the landfills.

New York↗
USGS2025

Lunar grid systems, coordinate systems, and map projections for the Artemis missions and lunar surface navigation

Foreward This document contains design specifications of a navigational standard for the Moon, including a Lunar Transverse Mercator system, a Lunar Polar Stereographic system, a Lunar Grid Reference System, and a unique coordinate structure, Artemis Condensed Coordinates, for Artemis mission navigation and lunar surface science. The National Aeronautics and Space Administration (NASA) Artemis campaign seeks to place humans on the Moon for the first time since the Apollo missions. Early Artemis missions are heavily focused on the lunar south pole, which promises to return valuable data on the Moon’s geologic record, amongst other mission objectives. Coordinate systems in use today for the lunar south pole provides crew members on the surface neither an efficient nor intuitive means to communicate their position and orientation. A novel grid coordinate system, the Lunar Grid Reference System, is proposed to address these concerns for use in real-time extravehicular activity operations on the lunar surface. The many stakeholders involved in the Artemis missions will need a common system to communicate position and orientation while astronauts are operating on the lunar surface. To that end, Artemis crew members will need that system to be efficient and intuitive to promote efficient extravehicular activity timelines and reduce confusion. In the context of this document, these characteristics are addressed on the design of lunar coordinate systems: Efficient.—The number of characters required to communicate a location within a desired precision level in both local and global contexts, and how many steps are required for a recipient or sender to interpret a location. Intuitive.—How well the system aligns with human perceptual abilities, and whether the system yields distances that have the same relationship to actual lunar surface distance in all directions from the point where a person is located. Technological systems are currently being investigated to supplement the crew members’ ability to locate and orient themselves and other assets on the lunar surface; however, it is unlikely that those systems will be fully operational for the first few landed missions. Even with future positional aids, crew members will still need an efficient and intuitive means to communicate position and orientation. In addition, if technological systems fail, the crews will require land navigation skills and have maps available, thus providing further motivation for a crew-centric coordinate system. The contents of this U.S. Geological Survey (USGS) document detail a comprehensive framework for standardizing lunar crewed surface navigation within NASA and outlines the protocols, methods, and designs necessary for achieving consistency and interoperability across relevant space mission teams and lunar surface navigators. Key components of this document include designs of map projections, projected coordinate reference systems (Lunar Transverse Mercator and Lunar Polar Stereographic systems), and a grid system (Lunar Grid Reference System and Artemis Condensed Coordinates) for the Moon. The work proposed in this document seeks to accomplish something similar to the National Geospatial-Intelligence Agency (NGA) document SIG 0012 (NGA, 2014a), but for using grid systems for the Moon. This report incorporates initial feedback and input from NASA’s Artemis Geospatial Data Team, NASA’s Flight Operations Directorate, National Geodetic Survey, USGS Astrogeology Science Center, and NGA and is intended to serve as a resource for all involved with the Artemis missions, as well as for engineers designing and operating lunar infrastructure.

Techniques and Methods↗
USGS2025

Mapping eelgrass (Zostera marina) cover and biomass at Izembek Lagoon, Alaska, using in-situ field data and Sentinel-2 satellite imagery

The U.S. Geological Survey and the U.S. Fish and Wildlife Service have developed a three-tiered strategy for monitoring eelgrass ( Zostera marina ) beds at Izembek Lagoon, Alaska, that targets different spatial and temporal scales. The broadest-scale monitoring (tier-1) uses satellite imagery about every 5 years to delineate the spatial extent of eelgrass beds throughout the lagoon. This report describes the most recent (mid-2020s) tier-1 eelgrass monitoring at Izembek Lagoon. The monitoring effort began by canvasing all satellite imagery collected during summer, under clear daytime skies and at low-tide, since the last tier-1 effort in 2006. Two eelgrass maps of Izembek Lagoon were generated by first creating maps of spectrally unique classes from two Sentinel-2 satellite images collected on July 1, 2016, and August 14, 2020, then attributing those spectral classes with information about eelgrass conditions based on field data. Specifically, maps depicting various eelgrass metrics, such as percentage of cover and modeled biomass, were generated using summaries of the ground data that spatially intersected each spectral class. Comparisons of the 2016 and 2020 Sentinel-2 maps showing eelgrass distributional extent, as well as a 2006 Landsat map, indicated that areas where eelgrass presence may have declined during 2006–20 were most prevalent in the central part of Izembek Lagoon. More recently, during 2016-20, areas of possible biomass decline were more prevalent in the southern part of the lagoon. Monitoring eelgrass conditions at Izembek Lagoon with satellite imagery and concurrent ground data allows conditions to be compared over time, but the influences of tide levels, growing season phenology, and spatiotemporal co-registration accuracy should be considered when designing and interpreting change detection analyses.

Alaska↗
USGS2024

Seismicity zoning at Coso geothermal field and stress changes from fluid production and migration

The Coso geothermal field is a major geothermal power production site in the western United States. It has been observed that low-magnitude seismic events ( M < 3.71) are unevenly distributed in three distinct zones, namely, nearfield (<3 km), midfield (3–6 km), and farfield (> 6 km) from the Coso geothermal plant. These zones exhibit distinct changes in earthquake location before and during geothermal production episodes that began in 1986. After 1986, the midfield region of the main flank experiences a significantly lower seismicity rate than the surrounding areas before production episodes. During 2014–2019, the farfield earthquakes cluster in the eastern and western parts of the greater Coso area, which is discernably different from how those pre-production earthquake events were distributed along the conjugate NW-SE and SW-NW trending structures across the main flank. Here, we analyze the stage of stress with finite-element-based poroelastic simulations to illustrate how the spatiotemporal evolution of the seismicity is associated with the pattern of stress perturbations caused by fluid migration amid the operations of geothermal power plants. Generally, ∼70% of co-production seismicity is found in zones of increased Coulomb stress between 2014 and 2019 at >99% confidence. Meanwhile, the midfield zone of seismic paucity overlaps with the zone of decreasing pore-fluid pressure. Overall, the results provide a physical explanation of how decadal geothermal operations at Coso have perturbed stress-field changes and contributed to the evolving characteristic seismic pattern, shedding insights into assessing the seismic hazard in other geothermal settings.

California↗
USGS2026

Widespread terrestrial ecosystem disruption at the onset of the Paleocene–Eocene Thermal Maximum

The Paleocene–Eocene Thermal Maximum (PETM, ~56 Mya) interval was marked by massive 13 C-depleted carbon emissions into the ocean/atmosphere system, manifested as a negative carbon isotope excursion (CIE) in sedimentary components, and ~5 °C global average warming. Episodes of hydrological perturbations and soil-erosion have been widely documented for the PETM but their link with vegetation- and carbon cycle changes remain poorly constrained. Here, we present organic microfossil evidence showing a strong increase in fern-dominated pioneer vegetation that replaced coniferous forests on the margin of the Norwegian Sea during the first millennia of the CIE. With the present stratigraphic constraints, the “fern spike” occurred simultaneously in terrestrial settings along the North Sea, Arctic Ocean, the US east coast and in southern Australia, indicating that pioneer vegetation persisted for several millennia following a partial collapse of previously stable terrestrial ecosystems. Both the ferns and influx of microcharcoal imply recurrent physical disturbance, including soil destabilization and erosion, potentially linked to droughts, wildfires, and strong hydrological forcing resulting from extreme climate change. Together with evidence for reworked clay minerals and ancient organic matter (kerogen), these findings show that highly disturbed terrestrial ecosystems were widespread across mid- and high-latitude regions globally. Carbon cycle model simulations suggest that a substantial loss of standing and buried biomass, along with oxidation of soil organic matter, acted as important positive feedbacks during the onset of the CIE. Additionally, enhanced kerogen weathering likely contributed as another major positive feedback throughout both the onset and main phase of the CIE.

Proceedings of the National Academy of Sciences↗
USGS2025

Altitude of the potentiometric surface and depth to water in the Mississippi River Valley alluvial aquifer, spring 2022

Potentiometric-surface and depth-to-water maps for spring 2022 were created for the Mississippi River Valley alluvial aquifer (MRVA) using groundwater-altitude data from 1,136 wells completed in the MRVA and from the altitude of the top of the water surface in area rivers from 160 streamgages. The potentiometric-surface and depth-to-water maps for 2022 were created to support investigations to characterize the MRVA as part of the U.S. Geological Survey Water Availability and Use Science Program. Sufficient data were available to map the potentiometric surface and depth to water of the MRVA for spring 2022 for about 83 percent of the aquifer area. The potentiometric contours ranged from 0 to 340 feet (ft) above the North American Vertical Datum of 1988. The regional direction of groundwater gradient was generally to the south-southwest, except in areas of groundwater-altitude depressions, where the groundwater gradient was into the depression, and near rivers, where the groundwater gradient can be from aquifer to the river or from the river into the aquifer. There are large depressions in the potentiometric-surface map in the lower one-half of the Cache region and in much of the Grand Prairie and Delta regions. Depth to water in the MRVA, spring 2022, by well ranged from 5.00 ft above land surface to 145.66 ft below land surface.

Mississippi River Valley alluvial aquifer↗
USGS2024

Representation of surface-water flows using Gradient-Related Discharge in an Everglades Network

The Everglades Depth Estimation Network interpolates water-level gage data to produce daily water-level elevations for the Everglades in south Florida. These elevations were used to estimate flow vectors (gradients and directions) and volumetric flow rates using the Gradient-Related Discharge in an Everglades Network (GARDEN) application developed by the U.S. Geological Survey in cooperation with the U.S. Army Corps of Engineers. Flow rates in both the east-west and north-south directions were computed on a 400-meter square grid using modified parameters in the Manning’s equation. The frictional resistance parameter in the Manning’s equation was calibrated to measured flow rates at coastal creeks fed by Everglades Depth Estimation Network boundary flows. Levees and other features that act as barriers to flow were defined as “no-flow” grid cells where vectors were set to zero. The flow volume magnitudes were calibrated with 2020 daily values of coastal river flows, and verification was performed using 2021 data. Within a given day, the measured coastal river flows fluctuate more than the GARDEN boundary flows because of tidal and wind forcings. Because the GARDEN boundary flows were the upstream water source for the coastal rivers, calibration focused on matching average daily flow volumes rather than daily fluctuations. The Pearson’s correlation coefficient is 0.766 for the 2020 calibration period and 0.566 for the 2021 verification period. Applying GARDEN to periods with hydraulic-control-structure releases allows the propagation of structure flows to be seen in the daily flow-vector maps along with the multiday response of flows farther downgradient. Flow vectors may be overestimated near control structures because of difficulties in resolving the water gradient downstream from the structure. Flow vectors farther from the structure are more accurate than those near the structure.

Florida↗
USGS2026

Statewide surficial geologic map of Nebraska underscores Quaternary landscape evolution from the High Plains to the Central Lowland

Surficial geologic mapping in Nebraska has been conducted primarily at the 1:24,000 scale since the mid-1990s, although there have also been limited efforts to map generalized Quaternary and surficial geology within the state and the region. We compiled and evaluated disparate maps (1:24,000–1:1,000,000) and datasets—including geologic, soil and soil parent material, and geomorphic maps as well as LiDAR derivatives—to produce a single 1:500,000 scale surficial geologic map of Nebraska that is the first of its kind. This new map provides a coarse-scale surficial geologic map that will be incorporated into a nationwide U.S. Geological Survey Quaternary geologic map. It also reflects the variation and uniqueness of physical landscapes in the state, where the Great Plains and Central Lowland physiographic provinces meet, further developing a richer interdisciplinary understanding of regional geomorphology in the heart of North America.

Nebraska↗
USGS2026

Interplay between tectonics and submarine mass transport deposits in Cortes Basin: New high-resolution geophysics in the Outer California Borderland

The Outer California Borderland (OCB) is an active transform plate boundary offshore Southern California, where the relationship between faulting and submarine mass transport deposits (MTDs) remains poorly understood. Onshore paleoseismic data provide high-resolution earthquake records, whereas marine geophysical data capture longer-term histories. Offshore fault systems pose hazards to infrastructure and dense coastal populations, particularly when linked to submarine landslides. We present new high-resolution geophysical data set (cruise SR2303), including bathymetric and CHIRP sub-bottom data integrated with legacy seismic reflection data and chronostratigraphic constraints from ODP Site 1012 to examine Quaternary MTD recurrence and tectonic controls in the Cortes Basin, OCB. Bathymetry shows deformational features, including slide scarps and previously unmapped fault segments with evidence of Holocene activity. CHIRP profiles reveal 10 stacked MTDs in the East Cortes Basin and 8 in the West Cortes Basin, spanning ∼752 ka with an average recurrence of ∼83.6 ± 1 ka. Acoustic imaging shows 7 MTD intervals coinciding with fault offset increments and fault growth suggesting earthquake-triggered mass wasting. A strong association between MTD occurrences and sea-level extremes also supports glacio-eustatic contribution to slope failure. Stratigraphic correlations suggest quasi-synchronous MTDs across the eastern and western areas, likely triggered by larger eathquakes in the Quaternary. Although the identified MTDs occur relatively far from the Southern California coast, they still pose a potential tsunamigenic hazard requiring further assessment. Moreover, if linked to earthquakes along major strike-slip faults, for example, the Ferrelo fault, the MTDs may provide valuable proxies to constrain rupture scenarios and fault connectivity within the understudied OCB.

California↗