USGS ScienceSearch

SEARCH · USGS Science

Results for “Transaction of the American Fisheries Society”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,688 records · Page 24Linked to original sources

Computation of regional groundwater budgets for the Virginia Coastal Plain aquifer system

Computation of detailed groundwater flow budgets for subdivisions of Virginia’s Coastal Plain aquifer system has enabled quantification and more thorough understanding of groundwater flow within this important water resource. A zone budget analysis conducted on previously published groundwater models of the Virginia Coastal Plain and Virginia Eastern Shore shows that groundwater conditions vary substantially throughout the Coastal Plain aquifer system due to local variations in hydrogeology and historical and ongoing variations in groundwater use and management. Decades of substantial groundwater withdrawal from the Coastal Plain aquifer system have fundamentally altered groundwater flow from pre-development conditions. Rates of sustainable withdrawal are limited because the downward groundwater flow rate into confined aquifers supplying groundwater is a relatively small portion of the total groundwater water budget for the aquifer system. Analyses of groundwater budgets from the Virginia Coastal Plain model show that groundwater flow is generally outward from the surficial aquifer to rivers and coastal water bodies and downward through a series of underlying aquifers and confining units to the Potomac aquifer, which is the deepest aquifer and the source of most groundwater withdrawals. Downward flow into the Potomac aquifer currently is estimated to be only 7 percent of total net precipitation-derived net recharge at the land surface but makes up about 66 percent of inflow to the aquifer in Virginia, with much of the remaining inflow occurring laterally from areas outside of defined groundwater budget regions in Virginia. For several decades prior to 2010, high rates of withdrawal from the Potomac aquifer resulted in substantial decline in groundwater storage in the aquifer and in most overlying aquifers and confining units. From 2010 to 2025, rates of withdrawal substantially lower than the historical maximum have resulted in small net increases in groundwater storage in the confined aquifer system for most regions of the Virginia Coastal Plain. Nevertheless, for the same period, groundwater storage for the entire model domain continues to incrementally decline, indicating that storage recovery in Virginia is offset by a continued decrease in storage in areas beneath the Chesapeake Bay or in adjacent areas of Maryland and North Carolina. Withdrawals from the Potomac aquifer have induced substantial downward flow which is a large part of groundwater budgets for confined aquifers such as the Potomac. Downward groundwater flow continues under current conditions, but because vertical flow rates are a function of the difference between water pressure in the upper surficial systems and lower confined units, those rates are lower than those in earlier decades as the confined water levels partially recover from larger groundwater withdrawals in the past. Geographically, groundwater flow is generally inward from perimeter regions of the Virginia Coastal Plain toward central regions with the largest withdrawal rates. Estimated groundwater inflow from coastal regions could be contributing to saltwater intrusion, though that was not measured directly in this study. Analyses of groundwater budgets from the Virginia Eastern Shore peninsula, a geographic region of the Virginia Coastal Plain, show that groundwater flow for that isolated aquifer system is generally outward from the surficial aquifer to coastal water bodies and downward into the confined Yorktown-Eastover aquifer system, which is the source of most withdrawals. Downward groundwater flow into the confined Yorktown-Eastover aquifer system is estimated to be less than 2 percent of total recharge and less than 9 percent of net recharge at the water table but makes up over 93 percent of all inflow to the confined aquifer system. Decades of substantial but relatively consistent groundwater withdrawals have induced greater downward flow rates into the confined aquifer system but also have resulted in loss of groundwater from storage. Currently, estimated storage loss accounts for slightly under 7 percent of withdrawals from the confined aquifer system. The current withdrawal rate from the confined Yorktown-Eastover system is near the highest reported rate for the Eastern Shore, which means that the storage depletion is expected to continue, even though groundwater levels appear to be relatively stable. Estimated groundwater flow rates upward from the confining unit underlying the Yorktown-Eastover system and small rates of inflow from coastal water bodies underscore ongoing concerns about up-coning and lateral intrusion of salty groundwater.

EarthArXiv

Hydrogeology, groundwater salinity distributions, and assessment of the effect of oil-production activities on groundwater in the Midway Valley area, western Kern County, San Joaquin Valley, California

This study seeks to determine the effects of oil field produced water disposal operations and well mechanical integrity issues on groundwater quality in oil fields in the southwest San Joaquin Valley, California. Whereas previous studies used groundwater wells to study shallow aquifers outside the oil fields, this study demonstrates that future approaches may use oil well geophysical logs to map groundwater head gradients, create salinity profiles and document changes in salinity over time in oil field areas with sparse groundwater well data and at depths greater than 330 m. We also incorporate an analysis of well histories to determine potential effects of compromised wellbore seals on changes in aquifer quality that cannot be explained by water disposal practices. Water quality in the aquifers is naturally brackish across most of the area, with better quality groundwater occurring in the eastern part. Geophysical logs are used to determine salinity variations within aquifers including the depth at which TDS exceeds 10,000 mg/L. This depth ranges from 366 m in the northwest to approximately 1,500 m in the southeast. Oil well porosity logs are used to determine water table elevations. These logs indicate the water table slopes south-southeast, showing the predominant groundwater flow direction is from oil field disposal areas toward better quality groundwater east of the oil fields. Geophysical logs show formation resistivity near some disposal facilities has decreased over time, indicating the salinity of the aquifer has increased due to disposal of saline produced water in injection wells and ponds. Oil well history analysis suggests that increased salinity over time in water-saturated sand intervals >1.5 km from disposal facilities may be caused by mechanical failures and/or incomplete borehole seals in poorly constructed or abandoned wellbores prevalent throughout the study area—particularly wells drilled prior to 1930.

California

The geologic history of the Chehalis Forearc Basin, Washington State, USA

The Chehalis basin is located between the Cascade arc and the Coast Range in southwest Washington State. It consists of sedimentary and volcanic rocks deposited throughout the Cenozoic and is underlain by the Siletzia terrane, a thick, large igneous province accreted in the Eocene. Here, we constrain evolution of the Chehalis basin depocenter using isochore maps derived from isostatic gravity anomalies, borehole data, and stratigraphy for several time periods: the Eocene (47.6–36.8 Ma), the Oligocene (36.8–20 Ma), and the Neogene (20–0 Ma). Our results suggest that local subsidence is driven by deformation on faults that bound and intersect the basin. We see northward depocenter migration, interpreted as a shift in deformation from the northwest striking Cedar Creek fault to the west striking Doty fault. We interpret these data in terms of the long-term north-south shortening and clockwise rotation of the Cascadia forearc. During the Eocene, the Cedar Creek fault was preferentially aligned with north-south shortening, but became less active when clockwise rotation brought the Doty fault into east-west alignment with the stress field. Sediment accumulation rates decreased from 196 m/Myr in the Paleogene (∼40–20 Ma) to 27 m/Myr in the Neogene (∼20–0 Ma) as Miocene uplift of the Coast Range limited accommodation space and shifted the depositional environment from marine to fluvial. Our results are consistent with the geologic evolution of the Portland and Tualatin basins to the south and reveal a depositional and structural history uniquely shaped by clockwise rotation of the Cascadia forearc.

Washington

Revision of ModelMuse to support the use of PEST software with MODFLOW and SUTRA models

Executive Summary ModelMuse is a graphical user interface for several groundwater modeling programs. ModelMuse was updated to generate the input files for the parameter estimation software suite PEST. The software is used with MODFLOW or SUTRA models to run PEST-based parameter estimation and display the updated model inputs after parameter estimation. The PEST input files can also be used with the PEST++ version 5 software suite. Parameter estimation typically requires defining the parameters being adjusted during calibration and observations for assessing calibration quality. After a parameter is defined in ModelMuse, it can be applied to all or part of a model dataset. Pilot points—a parameterization device that facilitates higher levels of parameterization—can be used to assign spatially variable distributions of model inputs. Parameters can be applied to temporally varying features, such as boundary conditions, by either applying them to all the values in a series in one step or by applying separate parameters to individual members of a series. ModelMuse allows the definition of many observation types from various model output files. For MODFLOW 6 and SUTRA models, new options were added to ModelMuse to allow it to display the changed input after parameter estimation is complete. For MODFLOW–2005 and MODFLOW–NWT models, ModelMuse can import an entire model for visualization. An example illustrates the use of PEST with a MODFLOW 6 model in ModelMuse.

Techniques and Methods

Macroseismology

In this chapter I discuss the use of so-called macroseismic data, i.e., reports of damage and other effects of shaking on humans and the built environment, to improve the characterization of earthquakes and the ground motions they produce. Macroseismic data are critical not only to investigate earthquakes that occurred before the start of the instrumental era in seismology, but are also, by virtue of the spatially rich nature of the data, of tremendous potential importance to investigate early instrumental and even recent earthquakes. Fueled by both the advent of on-line systems that now produce unprecedented volumes of macroseismic intensity data and by recognition of the importance of understanding key historical earthquakes, there has been a growing appreciation for the value of macroseismic data. It is, however, critical to understand both the unique challenges and the unique opportunities associated with these data. I review the evolution of thought and practices regarding analysis of macroseismic data, and the use of such data to improve the characterization of historic and early instrumental earthquakes.

Book chapter

Investigation of drivers and sources of potential harmful algal blooms in Lake Anna, Virginia, 2023-24

Algal blooms in freshwater reservoirs are an increasing concern because of the risk to aquatic ecosystem health, recreational use, and water quality. Among the taxa that comprise an algal bloom, cyanobacteria are of particular concern due to the potential to produce toxic compounds which can cause acute and chronic illness in humans if ingested through contaminated water or shellfish. When toxins are above a toxin-specific threshold in the water column, the Commonwealth of Virginia categorizes the bloom as a harmful algal bloom (HAB), distinguishing it from an algal bloom without toxins present. Toxins are of particular concern in bodies of water which serve as major recreational areas, such as Lake Anna in central Virginia. Lake Anna is a 27 km-long and 47 km2 reservoir in central Virginia. Since the Commonwealth of Virginia revised the HAB monitoring framework in 2018, algal bloom advisories for potentially toxigenic blooms have been issued in the western, riverine zone of the reservoir. There were detections of microcystin and anatoxin production but no detections of cylindrospermopsin and saxitoxin production in Lake Anna; however, toxin concentrations were low, at values less than 0.65 µg/L. In 2023, the U.S. Geological Survey, in cooperation with Virginia Department of Environmental Quality, initiated a 19-month intensive and extensive study of western Lake Anna and its tributaries (North Anna River and Pamunkey Creek) to (1) characterize the algal community, biomass, and toxin production; (2) identify potential drivers leading to algal bloom initiation, persistence, and decline; and (3) assess the primary sources of the drivers contributing to algal blooms. Continuous and discrete monitoring of water quality within the lake, watershed inputs, meteorological conditions, and algal communities were monitored. Multiple modeling scenarios identified that the formation and persistence of algal blooms in Lake Anna are driven by interactions among chemical, macro- and micronutrient, and physical factors. Key drivers include total nitrogen, total phosphorus, water temperature, suspended sediment concentration, wind speed, copper, iron, molybdenum, nickel, sodium, and alkalinity. During this study, winter stormflow events delivered the highest loading of macro- and micronutrients from the tributaries to the lake. The lake is a sink for these nutrients in the water column or in the lake-bed sediments. During high-occupancy and recreation periods on the lake in the summer months, boating activity can promote internal loading by the resuspension of the lake-bed sediments, thereby increasing the nutrient availability for algal uptake. Thermal stratification and hypoxic conditions were observed, which can contribute to the passive release of nutrients into the water column, further facilitating algal bloom proliferation. These processes may create a positive feedback loop that supports the formation, persistence, and annual recurrence of algal blooms in the western region of Lake Anna. Continued water-quality monitoring of early warning indicators may improve the detection and forecasting of algal growth in the lake and help managers proactively manage water quality and algal growth.

EarthArXiv

Petrography and mineralogy of selected pre-Middle Jurassic basement rocks beneath the Atlantic and Gulf Coastal Plains in Florida

Florida is covered by flat-lying sedimentary strata of the Atlantic and Gulf Coastal Plains. These strata have accumulated since Middle Jurassic time. The pre-Middle Jurassic, or basement, rocks that underlie the Coastal Plain in Florida are known only from drill cores and cuttings recovered from a relatively small number of boreholes. This data report presents petrographic observations and the results of X-ray diffraction analyses of basement rocks from 18 boreholes across Florida in support of the identification, discrimination, and correlation of units for a subcrop geologic map of pre-Middle Jurassic rocks composing Florida’s sub-Coastal Plain geology.

Florida

Conceptual and numerical groundwater flow model of the Iowa River alluvial aquifer near Tama County, Iowa, 1980 through 2022

The Iowa River alluvial aquifer is an important source of water on the Meskwaki Settlement in Tama County, Iowa, which is land owned by the Sac & Fox Tribe of the Mississippi in Iowa (commonly known as the Meskwaki Nation). The U.S. Geological Survey constructed a groundwater flow model, including a conceptual and numerical model, of the Iowa River alluvial aquifer and underlying hydrogeologic units near the Meskwaki Settlement in Tama County, Iowa, for the period of January 1980–August 2022 to estimate the fraction of water pumped from the Iowa River alluvial aquifer by Meskwaki Settlement wells that is derived from streamflow depletion in the Iowa River and its tributaries. Streamflow depletion is a reduction in streamflow caused by groundwater pumping and includes the interception by groundwater production wells of water that otherwise would have been discharged to streams (called “captured groundwater discharge”) and induced infiltration of streamflow to the production wells. Calibrated model runs were performed with no simulated pumping and simulated pumping only at Meskwaki Settlement wells, and the change in simulated flow rates between the groundwater system and streams for the two model runs represents the amount of streamflow depletion in the Iowa River and tributary streams resulting from pumping at the Meskwaki Settlement wells. Streamflow depletion in the Iowa River and its tributaries as a percentage of simulated pumping at the Meskwaki Settlement wells was calculated by dividing this difference by the total simulated pumping rate for the Meskwaki Settlement wells. The model results demonstrate that the mean monthly streamflow depletion, including induced infiltration and captured discharge, in the Iowa River and its tributary streams as a percentage of mean monthly pumping at the Meskwaki Settlement wells was 97.4 percent and ranged from 65.4 to 112 percent. Of the total streamflow depletion, mean monthly induced recharge was 20.9 percent and ranged from 4.9 to 37.2 percent. Mean monthly captured discharge was 76.5 percent and ranged from 57.1 to 97.1 percent. These results indicate that most of the water pumped from the Meskwaki Settlement wells is the result of streamflow depletion, in the form of both induced infiltration and captured discharge.

Iowa

Moment magnitude for small earthquakes in the Delaware basin of west Texas and southeast New Mexico, USA

The Delaware Basin region of west Texas and southeast New Mexico has become one of the most prolific regions of seismic activity in the continental United States due to widespread hydraulic fracturing and wastewater disposal injection. In response to the increased number of earthquakes in this region, rapid and accurate characterization of earthquake sources is necessary to understand the evolution of seismic activity and level of seismic hazard associated with these earthquakes. This study re-evaluates earthquake magnitudes, estimating moment magnitude (MW) for small earthquakes in the Delaware Basin using 1) moment-rate spectra derived from S-wave coda envelopes, and 2) a relative magnitude method that relies exclusively on the ratio of waveform amplitudes between highly correlated waveform pairs. The coda-envelope method produces accurate M W estimates for small earthquakes ( M 1.5 – 3) that are consistent with independent, waveform modeled moment magnitudes for events with M W > 3 . Using the relative amplitudes method to extend these M W magnitudes to many other events, we successfully provide relative moment magnitude ( M W,rel ) values for 81% of the Texas Seismological Network catalog in the Delaware Basin region, and 45% of the USGS Induced Seismicity Project’s catalog of events in southeast New Mexico. The adoption and integration of the calibrated M W,rel method with current magnitude estimation methods offers valuable insights into the relationships between local and moment magnitude and will contribute to improved characterization of widespread induced seismicity.

New Mexico, Texas

The 3D National Topography Model Call for Action—Part 2: The Next Generation 3D Elevation Program

The three-dimensional (3D) National Topography Model initiative to integrate elevation and hydrography data includes the next generation of hydrography data from the 3D Hydrography Program and the next generation of elevation data from the 3D Elevation Program (3DEP). The first-ever collection of light detection and ranging (lidar) data for the nation (IfSAR for Alaska) provides a critical baseline reference, and the addition of multiple repeat elevation mapping projects as part of the next generation of 3DEP would substantially expand analysis capabilities. As the U.S. Geological Survey (USGS) is closing in on our goal of complete coverage with 3DEP data available or in progress for 98.3 percent of the Nation at the end of fiscal year 2024, the USGS is already transitioning to the next generation of 3DEP. Based on the 3D Nation Study results and input from a broad range of stakeholders, the USGS National Geospatial Program has finalized a new design for 3DEP that provides increased lidar quality levels and refresh rates. The new program is designed with more flexibility to meet changing user needs and take advantage of improvements in mapping technologies. The program will aim to expand the level of interagency coordination for topobathymetric lidar acquisition for inland rivers. The next generation of 3DEP will also aim to emphasize research, including advancing program design, products, and services and engaging and leveraging the evolving 3D industry. Research goals also include becoming more flexible in meeting user needs and taking advantage of evolving remote-sensing technologies. The program also plans to move from focusing on producing standard products to producing a concept of a 3D Nation Ecosystem with a variety of inputs, products, and services.

Circular

Natural attenuation of chlorinated volatile organic compounds in ground water at Area 6, Naval Air Station Whidbey Island, Washington

Natural attenuation is a viable alternative to pump and treat for meeting remediation objectives in the vicinity of the southern contaminant plume. The combination of historically low contaminant concentrations in ground water, a landfill cap that limits source area contributions, favorable conditions for degradation of VC, and a relatively long downgradient distance to potential receptors are all favorable for natural attenuation as a remediation alternative. Natural attenuation could effectively meet all but one remediation goal that extraction wells PW- 2, PW-4, PW-6, PW-7, PW-8 and PW-9 are currently being employed to meet. The goal of preventing migration of all VC across the site boundary could not be met by natural attenuation. Some VC would migrate south of the Navy boundary, but the potential for subsequent VC mineralization downgradient of the base and the existing institutional controls would result in minimal additional risk from using natural attenuation. In the western contaminant plume natural attenuation is not currently a viable alternative to pump and treat for meeting remediation objectives. There is a possibility that rates for reductive dechlorination of TCE and TCA could increase substantially if the plume was allowed to migrate beneath the Oak Harbor landfill, but there are not enough data to be certain of such an increase. TCA and TCE concentrations at the leading edge of the western plume need to be reduced to at least 25 and 40 µg/L, respectively, to be protective of potential downgradient receptors. Source area TCA and TCE concentrations have decreased substantially over the past ten years, and the extraction wells PW-3 and PW-5 in particular are removing a significant mass of contaminants from ground water, so natural attenuation may be a viable alternative for the western plume in the future. There would be some possible side benefits of using natural attenuation as an alternative to pump and treat in the southern contaminant plume. The first would be that the resulting decrease in the amount of treated water that would need to be recharged in the swale north of the landfill would result in less off-base migration of contamination across the western site boundary. The second benefit would be a substantial reduction in the amount of dissolved iron and manganese being extracted from the shallow aquifer and run through the treatment system. Removing that source of operation and maintenance problems would result in more effective containment and removal of contamination in the western contaminant plume. The most critical data gap identified in this evaluation is the paucity of contaminant chemistry information downgradient of the Navy boundary in the vicinity of the southern contaminant plume. Without such data, the behavior of the plume and the protectiveness of natural attenuation to downgradient receptors cannot be verified, and field attenuation rates for VC cannot be determined directly. The existing long-term monitoring plan would need to be reviewed and revised if natural attenuation is selected as a remedy for the contamination in the southern plume. In particular, additional performance monitoring wells may be required downgradient of the property.

Washington

Earthquake rupture arrest from depth‐dependent frictional stability on the Pütürge segment of the East Anatolian Fault Zone, Türkiye (Turkey)

Determining why earthquake ruptures stop is a central challenge in earthquake science and seismic hazard assessment. The Pütürge segment of the East Anatolian Fault Zone, Türkiye, exhibits shallow creep (<∼3 km depth) yet hosts M > 6.5 earthquake ruptures at greater depth. Here, we evaluate whether variations in frictional stability along this segment aided arrest of the 2020 M 6.7 Elaziğ and 2023 M 7.8 Pazarcık earthquake ruptures. Analysis of Sentinel‐1 Synthetic Aperture Radar imagery indicates the 2023 M 7.8 rupture propagated laterally into a metamorphic massif within the Pütürge segment, where slip rapidly decayed below detection limits. Creepmeters along this segment recorded no significant surface afterslip (<3 mm) in the following year. To investigate this fault‐slip behavior, we conducted triaxial friction experiments on Pütürge fault gouge sampled from an outcrop exposure. The gouge, composed primarily of muscovite, quartz, and calcite, is velocity strengthening at conditions approximating 0–2.5 km depth and velocity weakening at 4–5 km depth. This transition to velocity‐weakening friction is associated with enhanced comminution and shear localization observed microstructurally. Our results suggest that depth‐dependent frictional stability of the Pütürge fault segment facilitates rupture nucleation and propagation at depth while maintaining rupture‐arresting behavior near Earth’s surface.

Pütürge segment of the East Anatolian Fault Zone

Magnitude and frequency of floods in the Suwannee River Water Management District, Florida

Flood-frequency statistics for 2-, 5-, 10-, 25-, 50-. 100-, 200-, and 500-year recurrence intervals, based on three methods of analysis, are presented for 25 continuous-record and seven peak flow partial-record gaging stations in the Suwannee River Water Management District. The first method, for gaged stations, utilizes station records; the second method, for ungaged sites, utilizes regional regression analysis; and the third method uses a weighted combination of the station and regional values. Because the weighted values utilize two more or less independent estimates of the peak flow statistic, they are considered more accurate than the station estimates or the regression estimates alone. Also, the use of another weighting scheme to improve estimates of flood frequency statistics at ungaged sites is demonstrated. The karstic nature of much of the Suwannee River Water Management District significantly attenuates flood peaks in some streams by providing substantial subsurface storage when river stages are high. At such times, springs discharging into rivers may reverse flow temporarily and become sinks.

Florida

A model uncertainty quantification protocol for evaluating the value of observation data

The history-matching approach to parameter estimation with models enables a powerful offshoot analysis of data worth—using the uncertainty of a model forecast as a metric for the worth of data. Adding observation data will either have no impact on forecast uncertainty or will reduce it. Removing existing data will either have no impact on forecast uncertainty or will increase it. The history-matching framework makes it possible to perform this quantitative analysis leveraging the connections among observations, model parameters, and model forecasts. We show this behavior on a specific groundwater flow model of the Mississippi Alluvial Plain and show where the analysis can be informative for considering the potential design of an observation network based on existing or potential observations.

Scientific Investigations Report

New 10Be-26Al isochron burial dating informs the Pliocene and Pleistocene evolution of the lower Colorado River, southwestern United States

Four new 10 Be- 26 Al isochron burial ages ranging from 4.4 to 2 Ma on ancestral Colorado River deposits in the lower Colorado River corridor (LCRC) help constrain the river’s evolution during the Pliocene and early Pleistocene. They help fill a gap between previous work that focused on older and younger deposits: Older dated deposits include the 5 Ma Bouse Formation, which records the integration of the Colorado River through a series of preexisting basins to the Gulf of California and the ca. 4.5 - 3.5 Ma Bullhead Alluvium, a 200 to 300 m thick aggregational package that immediately followed integration. The much younger, 100 - 70 ka, Chemehuevi Formation is another major aggradation package mapped throughout the LCRC. The new burial ages on the facies of Santa Fe Railway (4.37 ± 0.71 Ma), boulder conglomerate of Bat Cave Wash (2.12 ± 0.26 and 2.05 ± 0.31 Ma), and the Palo Verde alluvium (3.03 ± 0.26 Ma) partially fill in a 3.5 M.y. gap between the deposition of the Bullhead Alluvium and the Chemeheuvi Formation and document the timescales over which the Colorado River was able to remove the Bullhead aggradational package and initiate newer and smaller aggradational pulses.

Arizona, California, Nevada