USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Geophysical Research - Atmospheres”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24Linked to original sources
USGS2004

Strain accumulation across the Coast Ranges at the latitude of San Francisco, 1994-2000

A 66-monument geodetic array spanning the Coast Ranges near San Francisco has been surveyed more than eight times by GIPS between late 1993 and early 2001. The measured horizontal velocities of the monuments are well represented by uniform, right-lateral, simple shear parallel to N29°W. (The local strike of the San Andreas Fault is ∼N34°W.) The observed areal dilatation rate of 6.9 ± 10.0 nstrain yr −1 (quoted uncertainty is one standard deviation and extension is reckoned positive) is not significantly different from zero, which implies that the observed strain accumulation could be released by strike-slip faulting alone. Our results are consistent with the slip rates assigned by the Working Group on California Earthquake Probabilities [2003] to the principal faults (San Gregorio, San Andreas, Hayward-Rodgers Creek, Calaveras-Concord-Green Valley, and Greenville Faults) cutting across the GPS array. The vector sum of those slip rates is is 39.8 ± 2.6 mm yr −1 N29.8°W ± 2.8°, whereas the motion across the GPS array (breadth 120 km) inferred from the uniform strain rate approximation is 38.7 ± 1.2 mm yr −1 N29.0°W ± 0.9° right-lateral shear and 0.4 ± 0.9 mm yr −1 N61°E ± 0.9° extension. We interpret the near coincidence of these rates and the absence of significant accumulation of areal dilatation to imply that right-lateral slip on the principal faults can release the accumulating strain; major strain release on reverse faults subparallel to the San Andreas Fault within the Coast Ranges is not required.

California↗
USGS2004

Recalculated probability of M ≥ 7 earthquakes beneath the Sea of Marmara, Turkey

New earthquake probability calculations are made for the Sea of Marmara region and the city of Istanbul, providing a revised forecast and an evaluation of time-dependent interaction techniques. Calculations incorporate newly obtained bathymetric images of the North Anatolian fault beneath the Sea of Marmara [Le Pichon et al., 2001; Armijo et al., 2002]. Newly interpreted fault segmentation enables an improved regional A.D. 1500-2000 earthquake catalog and interevent model, which form the basis for time-dependent probability estimates. Calculations presented here also employ detailed models of coseismic and postseismic slip associated with the 17 August 1999 M = 7.4 Izmit earthquake to investigate effects of stress transfer on seismic hazard. Probability changes caused by the 1999 shock depend on Marmara Sea fault-stressing rates, which are calculated with a new finite element model. The combined 2004-2034 regional Poisson probability of M≥7 earthquakes is ~38%, the regional time-dependent probability is 44 ± 18%, and incorporation of stress transfer raises it to 53 ± 18%. The most important effect of adding time dependence and stress transfer to the calculations is an increase in the 30 year probability of a M ??? 7 earthquake affecting Istanbul. The 30 year Poisson probability at Istanbul is 21%, and the addition of time dependence and stress transfer raises it to 41 ± 14%. The ranges given on probability values are sensitivities of the calculations to input parameters determined by Monte Carlo analysis; 1000 calculations are made using parameters drawn at random from distributions. Sensitivities are large relative to mean probability values and enhancements caused by stress transfer, reflecting a poor understanding of large-earthquake aperiodicity.

Sea Of Marmara↗
USGS2004

Interseismic strain and rotation rates in the northeast Mojave domain, eastern California

The northeast Mojave domain, a type locality for bookshelf faulting, is a region of east striking, left-lateral faults in the northeast corner of the Mojave block, a block otherwise dominated by ∼N40°W striking, right-lateral faults. Paleomagnetic evidence suggests that blocks within the domain have rotated clockwise about a vertical axis as much as 60° since 12.8 Ma [Schermer et al., 1996] . In 1994, and again in 2002, the U.S. Geological Survey surveyed an array of 14 geodetic monuments distributed across the northeast Mojave domain. The 2002 survey results were adjusted to remove the coseismic offsets imposed by the nearby Hector Mine earthquake (16 October 1999, M w = 7.1). The adjusted deformation across the array appears to be uniform and can be approximated by the principal strain rates ε 1 = 28.9 ± 9.1 N77.2°W ± 4.8° and ε 2 = −48.2 ± 8.9 N12.8°E ± 4.8° nstrain yr −1 ; extension reckoned positive, and quoted uncertainties are standard deviations. That strain accumulation could be released by slip on faults striking N32°W but not by bookshelf faulting on the east striking faults alone. The vertical axis rotation rate of the northeast Mojave domain as a whole relative to fixed North America is 71.0 ± 6.4 nrad yr −1 (4.07° ± 0.37° Myr −1 ) clockwise, about twice the maximum tensor shear strain rate. The observed rotation rate acting over 12.8 Myr would produce a clockwise rotation of 52.1° ± 4.7°, exclusive of possible coseismic rotations. That rotation is in rough agreement with the paleomagnetic rotation accumulated in the individual fault blocks within the northeast Mojave domain since 12.8 Ma.

California↗
USGS2004

Contemporary tectonic deformation of the Basin and Range province, western United States: 10 years of observation with the Global Positioning System

[1] We have estimated patterns and rates of crustal movement across 800 km of the Basin and Range at ∼39° north latitude with Global Positioning System surveys in 1992, 1996, 1998, and 2002. The total rate of motion tangent to the small circle around the Pacific‐North America pole of rotation is 10.4 ± 1.0 mm/yr, and motion normal to this small circle is 3.9 ± 0.9 mm/yr compared to the east end of our network. On the Colorado Plateau the east end of our network moves by ∼1–2 mm/yr westerly with respect to North America. Transitions in strain rates delimit six major tectonic domains within the province. These deformation zones coincide with areas of modern seismicity and are, from east to west, (1) east‐west extension in the Wasatch Fault zone, (2) low rate east‐west extension centered near the Nevada‐Utah border, (3) low rate east‐west contraction between 114.7°W and 117.9°W, (4) extension normal to and strike‐slip motion across the N10°E striking Central Nevada Seismic Zone, (5) right lateral simple shear oriented N13°W inside the Walker Lane Belt, and (6) shear plus extension near the Sierra Nevada frontal faults. Concentration of shear and dilatational deformation across the three westernmost zones suggests that the Walker Lane Belt lithosphere is rheologically weak. However, we show that linear gradients in viscosity and gravitational potential energy can also effectively concentrate deformation. In the Basin and Range, gradients in gravitational potential are spatially anticorrelated with dilatational strain rates, consistent with the presence of horizontal variations in viscosity of the lithosphere.

Arizona, California, Nevada, Utah↗
USGS2005

Magmatic effects of the Cobb hot spot on the Juan de Fuca Ridge

The interaction of the Juan de Fuca Ridge with the Cobb hot spot has had a considerable influence on the magmatism of the Axial Segment of the ridge, the second-order segment that overlies the hot spot. In addition to the construction of the large volcanic edifice of Axial Seamount, the Axial Segment has shallow bathymetry and a prevalence of constructional volcanic features along its 100-km length, suggesting that hot spot-derived magmas supplement and oversupply the ridge. Lavas are generally more primitive at Axial Seamount and more evolved in the Axial Segment rift zones, suggesting that fractional crystallization is enhanced with increasing distance from the hot spot because of a reduced magma supply and more rapid cooling. Although the Cobb hot spot is not an isotopically enriched plume, it produces lavas with some distinct geochemical characteristics relative to normal mid-ocean ridge basalt, such as enrichments in alkalis and highly incompatible trace elements, that can be used as tracers to identify the presence and prevalence of the hot spot influence along the ridge. These characteristics are most prominent at Axial Seamount and decline in gradients along the Axial Segment. The physical model that can best explain the geochemical observations is a scenario in which hot spot and mid-ocean ridge basalt (MORB) magmas mix to varying degrees, with the proportions controlled by the depth to the MORB source. Modeling of two-component mixing suggests that MORB is the dominant component in most Axial Segment basalts. Copyright 2005 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗
USGS2004

Noise in two-color electronic distance meter measurements revisited

Frequent, high-precision geodetic data have temporally correlated errors. Temporal correlations directly affect both the estimate of rate and its standard error; the rate of deformation is a key product from geodetic measurements made in tectonically active areas. Various models of temporally correlated errors are developed and these provide relations between the power spectral density and the data covariance matrix. These relations are applied to two-color electronic distance meter (EDM) measurements made frequently in California over the past 15-20 years. Previous analysis indicated that these data have significant random walk error. Analysis using the noise models developed here indicates that the random walk model is valid for about 30% of the data. A second 30% of the data can be better modeled with power law noise with a spectral index between 1 and 2, while another 30% of the data can be modeled with a combination of band-pass-filtered plus random walk noise. The remaining 10% of the data can be best modeled as a combination of band-pass-filtered plus power law noise. This band-pass-filtered noise is a product of an annual cycle that leaks into adjacent frequency bands. For time spans of more than 1 year these more complex noise models indicate that the precision in rate estimates is better than that inferred by just the simpler, random walk model of noise.

Journal of Geophysical Research B: Solid Earth↗
USGS2005

Estimating hydrodynamic roughness in a wave-dominated environment with a high-resolution acoustic Doppler profiler

Hydrodynamic roughness is a critical parameter for characterizing bottom drag in boundary layers, and it varies both spatially and temporally due to variation in grain size, bedforms, and saltating sediment. In this paper we investigate temporal variability in hydrodynamic roughness using velocity profiles in the bottom boundary layer measured with a high-resolution acoustic Doppler profiler (PCADP). The data were collected on the ebb-tidal delta off Grays Harbor, Washington, in a mean water depth of 9 m. Significant wave height ranged from 0.5 to 3 m. Bottom roughness has rarely been determined from hydrodynamic measurements under conditions such as these, where energetic waves and medium-to-fine sand produce small bedforms. Friction velocity due to current u*c and apparent bottom roughness z0a were determined from the PCADP burst mean velocity profiles using the law of the wall. Bottom roughness kB was estimated by applying the Grant-Madsen model for wave-current interaction iteratively until the model u*c converged with values determined from the data. The resulting kB values ranged over 3 orders of magnitude (10-1 to 10-4 m) and varied inversely with wave orbital diameter. This range of kB influences predicted bottom shear stress considerably, suggesting that the use of time-varying bottom roughness could significantly improve the accuracy of sediment transport models. Bedform height was estimated from kB and is consistent with both ripple heights predicted by empirical models and bedforms in sonar images collected during the experiment. Copyright 2005 by the American Geophysical Union.

Journal of Geophysical Research C: Oceans↗
USGS2004

Suspended sediment and hydrodynamics above mildly sloped long wave ripples

We investigate the spatial and temporal distribution of suspended sediment and the associated hydrodynamics over mildly sloped long wave ripples on the inner shelf. These bedforms had wavelengths of approximately 1 m and heights of approximately 5 cm, in a mean water depth of 4 m. The vertical and temporal structures of the suspended sediment concentration (SSC) are consistent with the entrainment of sediment on the offshore flank of the ripple, and rapid vertical mixing at the time of flow reversal, followed by advection onshore by the onshore fluid motion. This work confirms that the mechanism for sediment suspension above low-amplitude, long wave ripples is similar to the vortex formation process expected over steeper vortex ripples. Numerical simulations of the flow using the Dune2d model indicate that a separated rotational flow structure is generated at the flank of the ripple on the seaward side of the ripple crest, near the time of flow reversal. The simulations indicate that only one vortex is formed during each wave period, in agreement with the field observations. This asymmetry is due mainly to the presence of an offshore mean near-bed current of approximately 6 to 8 cm/s. The SSC is calculated by the model and compared to the field observations. A hydraulic bed roughness of 10 to 15 median grain diameters ( d 50 ) was used in order to match the model prediction to the observed SSC approximately 1 cm above the seabed (cab). However, the modeled SSC and turbulent kinetic energy were significantly lower than the field observations at elevations exceeding approximately 2 cab.

North Carolina↗
USGS2003

Mars Exploration Rover Athena Panoramic Camera (Pancam) investigation

The Panoramic Camera (Pancam) investigation is part of the Athena science payload launched to Mars in 2003 on NASA's twin Mars Exploration Rover (MER) missions. The scientific goals of the Pancam investigation are to assess the high‐resolution morphology, topography, and geologic context of each MER landing site, to obtain color images to constrain the mineralogic, photometric, and physical properties of surface materials, and to determine dust and aerosol opacity and physical properties from direct imaging of the Sun and sky. Pancam also provides mission support measurements for the rovers, including Sun‐finding for rover navigation, hazard identification and digital terrain modeling to help guide long‐term rover traverse decisions, high‐resolution imaging to help guide the selection of in situ sampling targets, and acquisition of education and public outreach products. The Pancam optical, mechanical, and electronics design were optimized to achieve these science and mission support goals. Pancam is a multispectral, stereoscopic, panoramic imaging system consisting of two digital cameras mounted on a mast 1.5 m above the Martian surface. The mast allows Pancam to image the full 360° in azimuth and ±90° in elevation. Each Pancam camera utilizes a 1024 × 1024 active imaging area frame transfer CCD detector array. The Pancam optics have an effective focal length of 43 mm and a focal ratio of f /20, yielding an instantaneous field of view of 0.27 mrad/pixel and a field of view of 16° × 16°. Each rover's two Pancam “eyes” are separated by 30 cm and have a 1° toe‐in to provide adequate stereo parallax. Each eye also includes a small eight position filter wheel to allow surface mineralogic studies, multispectral sky imaging, and direct Sun imaging in the 400–1100 nm wavelength region. Pancam was designed and calibrated to operate within specifications on Mars at temperatures from −55° to +5°C. An onboard calibration target and fiducial marks provide the capability to validate the radiometric and geometric calibration on Mars.

Journal of Geophysical Research E: Planets↗
USGS2003

Athena Microscopic Imager investigation

The Athena science payload on the Mars Exploration Rovers (MER) includes the Microscopic Imager (MI). The MI is a fixed‐focus camera mounted on the end of an extendable instrument arm, the Instrument Deployment Device (IDD). The MI was designed to acquire images at a spatial resolution of 30 microns/pixel over a broad spectral range (400–700 nm). The MI uses the same electronics design as the other MER cameras but has optics that yield a field of view of 31 × 31 mm across a 1024 × 1024 pixel CCD image. The MI acquires images using only solar or skylight illumination of the target surface. A contact sensor is used to place the MI slightly closer to the target surface than its best focus distance (about 66 mm), allowing concave surfaces to be imaged in good focus. Coarse focusing (∼2 mm precision) is achieved by moving the IDD away from a rock target after the contact sensor has been activated. The MI optics are protected from the Martian environment by a retractable dust cover. The dust cover includes a Kapton window that is tinted orange to restrict the spectral bandpass to 500–700 nm, allowing color information to be obtained by taking images with the dust cover open and closed. MI data will be used to place other MER instrument data in context and to aid in petrologic and geologic interpretations of rocks and soils on Mars.

Journal of Geophysical Research E: Planets↗
USGS2003

Athena Mars rover science investigation

Each Mars Exploration Rover carries an integrated suite of scientific instruments and tools called the Athena science payload. The primary objective of the Athena science investigation is to explore two sites on the Martian surface where water may once have been present, and to assess past environmental conditions at those sites and their suitability for life. The remote sensing portion of the payload uses a mast called the Pancam Mast Assembly (PMA) that provides pointing for two instruments: the Panoramic Camera (Pancam), and the Miniature Thermal Emission Spectrometer (Mini‐TES). Pancam provides high‐resolution, color, stereo imaging, while Mini‐TES provides spectral cubes at mid‐infrared wavelengths. For in‐situ study, a five degree‐of‐freedom arm called the Instrument Deployment Device (IDD) carries four more tools: a Microscopic Imager (MI) for close‐up imaging, an Alpha Particle X‐Ray Spectrometer (APXS) for elemental chemistry, a Mössbauer Spectrometer (MB) for the mineralogy of Fe‐bearing materials, and a Rock Abrasion Tool (RAT) for removing dusty and weathered surfaces and exposing fresh rock underneath. The payload also includes magnets that allow the instruments to study the composition of magnetic Martian materials. All of the Athena instruments have undergone extensive calibration, both individually and using a set of geologic reference materials that are being measured with all the instruments. Using a MER‐like rover and payload in a number of field settings, we have devised operations processes that will enable us to use the MER rovers to formulate and test scientific hypotheses concerning past environmental conditions and habitability at the landing sites.

Journal of Geophysical Research E: Planets↗
USGS2004

Luminescence dating of the Wabar meteorite craters, Saudi Arabia

Luminescence dating has been used to find the age of meteorite impact craters at Wabar (Al Hadida) in Saudi Arabia. The luminescence characteristics of the shocked material were determined. Using a variety of luminescence dating techniques applied to impactite formed by the meteorite, and to the underlying sand, the age is found to be 290 ± 38 years. A comparison is made with two possible historically recorded ages. An impact as young as this has implications for the assessment of hazards from the impact on Earth of small meteorites.

Al Hadida, Ar-Rub' Al-Khali (Empty Quarter)↗
USGS2004

Photomosaics of the cathodoluminescence of 60 sections of meteorites and lunar samples

Cathodoluminescence (CL) petrography provides a means of observing petrographic and compositional properties of geological samples not readily observable by other techniques. We report the low-magnification CL images of 60 sections of extraterrestrial materials. The images we report include ordinary chondrites (including type 3 ordinary chondrites and gas-rich regolith breccias), enstatite chondrites, CO chondrites and a CM chondrite, eucrites and a howardite, lunar highland regolith breccias, and lunar soils. The CL images show how primitive materials respond to parent body metamorphism, how the metamorphic history of EL chondrites differs from that of EH chondrites, how dark matrix and light clasts of regolith breccias relate to each other, how metamorphism affects eucrites, the texture of lunar regolith breccias and the distribution of crystallized lunar spherules ("lunar chondrules"), and how regolith working affects the mineral properties of lunar soils. More particularly, we argue that such images are a rich source of new information on the nature and history of these materials and that our efforts to date are a small fraction of what can be done. Copyright 2004 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗
USGS2004

Frequency and initiation of debris flows in Grand Canyon, Arizona

Debris flows from 740 tributaries transport sediment into the Colorado River in Grand Canyon, Arizona, creating rapids that control its longitudinal profile. Debris flows mostly occur when runoff triggers failures in colluvium by a process termed “the fire hose effect.” Debris flows originate from a limited number of geologic strata, almost exclusively shales or other clay‐rich, fine‐grained formations. Observations from 1984 through 2003 provide a 20 year record of all debris flows that reached the Colorado River in Grand Canyon, and repeat photography provides a 100 year record of debris flows from 147 tributaries. Observed frequencies are 5.1 events/year from 1984 to 2003, and historic frequencies are 5.0 events/year from 1890 to 1983. Logistic regression is used to model historic frequencies based on drainage basin parameters observed to control debris flow initiation and transport. From 5 to 7 of the 16 parameters evaluated are statistically significant, including drainage area, basin relief, and the height of and gradient below debris flow source areas, variables which reflect transport distance and potential energy. The aspect of the river channel, which at least partially reflects storm movement within the canyon, is also significant. Model results are used to calculate the probability of debris flow occurrence at the river over a century for all 740 tributaries. Owing to the variability of underlying geomorphic controls, the distribution of this probability is not uniform among tributaries of the Colorado River in Grand Canyon.

Arizona↗
USGS2004

Granular avalanches across irregular three-dimensional terrain: 2. Experimental tests

Scaling considerations indicate that miniature experiments can be used to test models of granular avalanches in which the effects of intergranular fluid and cohesion are negligible. To test predictions of a granular avalanche model described in a companion paper, we performed bench top experiments involving avalanches of dry sand across irregular basal topography that mimicked the complexity of natural terrain. The experiments employed a novel method of laser-assisted cartography to map the three-dimensional morphology of rapidly moving avalanches, thereby providing high-resolution data for comparison with model output. Model input consisted of two material properties (angles of internal and basal Coulomb friction of the sand), which were measured in independent tests, and of initial and boundary conditions that characterized the geometry of the experimental apparatus. Experimental results demonstrate that the model accurately predicts not only the gross behavior but also many details of avalanche motion, from initiation to deposition. We attribute this accuracy to a mathematical and computational formulation that conserves mass and momentum in three-dimensional physical space and satisfies the Coulomb equation in three-dimensional stress space. Our results support the hypothesis that a Coulomb proportionality between shear and normal stresses applies in moderately rapid granular flows and that complicated constitutive postulates are unnecessary if momentum conservation is strictly enforced in continuum avalanche models. Furthermore, predictions of our Coulomb continuum model contrast with those of a Coulomb point mass model, illustrating the importance of multidimensional modeling and model testing.

Journal of Geophysical Research Earth Surface↗
USGS2004

Granular avalanches across irregular three-dimensional terrain: 1. Theory and computation

To establish a theoretical basis for predicting and interpreting the behavior of rapid mass movements on Earth's surface, we develop and test a new computational model for gravity-driven motion of granular avalanches across irregular, three-dimensional (3-D) terrain. The principles embodied in the model are simple and few: continuum mass and momentum conservation and intergranular stress generation governed by Coulomb friction. However, significant challenges result from the necessity of satisfying these principles when deforming avalanches interact with steep and highly variable 3-D terrain. We address these challenges in four ways. (1) We formulate depth-averaged governing equations that are referenced to a rectangular Cartesian coordinate system (with z vertical) and that account explicitly for the effect of nonzero vertical accelerations on depth-averaged mass and momentum fluxes and stress states. (2) We compute fluxes of mass and momentum across vertical cell boundaries using a high-resolution finite volume method and Roe-type Riemann solver. Our algorithm incorporates flux difference splitting, an entropy correction for the flux, and eigenvector decomposition to embed the effects of driving and resisting forces in Riemann solutions. (3) We use a finite element method and avalanche displacements predicted by Riemann solutions to compute Coulomb stresses conjugate to the displacements in 3-D stress space. (4) We test the model output against analytical solutions, a sand cone conceptual experiment, and (in a companion paper) data from detailed laboratory experiments. Model results illustrate a complex interplay of basal traction and internal stress, and they successfully predict not only the gross behavior but also many details of avalanche motion from initiation to deposition.

Journal of Geophysical Research Earth Surface↗
USGS2004

Stress interaction between subduction earthquakes and forearc strike-slip faults: Modeling and application to the northern Caribbean plate boundary

Strike-slip faults in the forearc region of a subduction zone often present significant seismic hazard because of their proximity to population centers. We explore the interaction between thrust events on the subduction interface and strike-slip faults within the forearc region using three-dimensional models of static Coulomb stress change. Model results reveal that subduction earthquakes with slip vectors subparallel to the trench axis enhance the Coulomb stress on strike-slip faults adjacent to the trench but reduce the stress on faults farther back in the forearc region. In contrast, subduction events with slip vectors perpendicular to the trench axis enhance the Coulomb stress on strike-slip faults farther back in the forearc, while reducing the stress adjacent to the trench. A significant contribution to Coulomb stress increase on strike-slip faults in the back region of the forearc comes from "unclamping" of the fault, i.e., reduction in normal stress due to thrust motion on the subduction interface. We argue that although Coulomb stress changes from individual subduction earthquakes are ephemeral, their cumulative effects on the pattern of lithosphere deformation in the forearc region are significant. We use the Coulomb stress models to explain the contrasting deformation pattern between two adjacent segments of the Caribbean subduction zone. Subduction earthquakes with slip vectors nearly perpendicular to the Caribbean trench axis is dominant in the Hispaniola segment, where the strike-slip faults are more than 60 km inland from the trench. In contrast, subduction slip motion is nearly parallel to the Caribbean trench axis along the Puerto Rico segment, where the strike-slip fault is less than 15 km from the trench. This observed jump from a strike-slip fault close to the trench axis in the Puerto Rico segment to the inland faults in Hispaniola is explained by different distributions of Coulomb stress in the forearc region of the two segments, as a result of the change from the nearly trench parallel slip on the Puerto Rico subduction interface to the more perpendicular subduction slip beneath Hispaniola. The observations and modeling suggest that subduction-induced strike-slip seismic hazard to Puerto Rico may be smaller than previously assumed but the hazard to Hispaniola remains high. Copyright 2004 by the American Geophysical Union.

Puerto Rico↗