USGS Science⌕ Search

SEARCH · USGS Science

Results for “Environmental Development”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24Linked to original sources
USGS2024

Prefabricated Zero Ascend Omnispecies (ZAO) modular fish passage modules using advanced manufacturing techniques

The Zero Ascend Omnispecies (ZAO) fish passage attraction module “ZAO Attractor” is a novel system designed to facilitate upstream passage for a broad spectrum of fish species, with a particular focus on American shad and river herring (alewife and/or blueback herring). Combining the use of prefabricated, modular components with advanced manufacturing, the ZAO aims to provide a cost-effective and scalable solution for fish passage attractions across various hydropower sites. The system features a surface level entry, so fish do not need to climb. In addition, it is designed to be adjusted and repositioned to create the most effective attraction flows by managing the outflows from hydropower turbines. Budget Period 1 (BP1) focused on the design and modeling of the ZAO Attractor and demonstrated the engineering feasibility of a modular, prefabricated, hydrodynamically efficient structure with surface level entry and passage. During BP1, the hypothesis was that certain structural adaptations, such as the addition of long fins, could direct turbine outflows to create a desirable downstream flow. Simulations, however, were inconclusive, revealing the complex nature of fish preferences for hydraulic conditions. It was discovered that there were limited published studies on the direct correlation between quantified flow patterns and fish attraction, emphasizing the need for controlled studies to observe and measure these effects. In Budget Period 2 (BP2), controlled studies with live fish were prioritized to address these complexities. A partially scaled ZAO Attractor was evaluated in laboratory conditions using native river water to assess its capability to attract and guide fish. Despite challenges with flume flow conditions and the impact of flume dimensions on flow directionality and velocity, the studies provided insights into fish behavior and preferences, particularly the requirement for a consistent flow stream for migration cues. Adjustments to the fin structure demonstrated potential effectiveness in guiding fish toward the module. However, the hydraulic conditions within the flume environment did not accurately reflect typical in-river scenarios, therefore the results were inconclusive with respect to the optimal system configuration for in-river use. In the future, conducting comprehensive field studies can enhance understanding of the interactions between fish behavior and flow conditions created by the ZAO Attractor. Additionally, a design review is advised, particularly regarding the load scenarios throughout the seasons and positioning of the ZAO Attractor. These studies should continue to refine the design to achieve its intended benefits: economical and effective fish attraction and passage that can be adapted to specific site conditions while allowing for continued energy generation at sites up for re-licensure and adding hydropower generation to previously untapped resources in non-powered dams and new stream reaches. In conclusion, the ZAO fish passage attraction module presents a promising approach to fish passage at hydropower stations, with the potential to balance environmental concerns with renewable energy development. However, further field validation and optimization are necessary to ensure its effectiveness and practicality in real-world applications.

Final Technical Report↗
USGS1978

The Energy Lands Program of the U.S. Geological Survey, fiscal year 1976

The Energy Lands Program of the U.S. Geological Survey comprises several projects that conduct basic and interpretive earth-science investigations into the environmental aspects of energy-resource recovery, transmission, and conversion. More than half the coal reserves of the United States occur west of the Mississippi River; therefore, the program concentrates mostly on coal-producing regions in the Western interior. Additional studies involve the oil-shale region in Colorado, Wyoming, and Utah, and coal-related work in Alaska and Appalachia. The work is done both by USGS personnel and under USGS grants and contracts through the Energy Lands Program to universities, State Geological Surveys, and private individuals. Maps and reports characterizing many aspects of environmental earth science are being prepared for areas of Alaska, Montana, North Dakota, Wyoming, Utah, Colorado, New Mexico, Arizona, Oklahoma, Kansas, and Texas. Types of studies underway include bedrock, surficial, and interpretive geology; engineering geology, geochemistry of surface materials and plants; climatic conditions as they influence rehabilitation potential of mined lands; and feasibility of surface vs. underground mining. The purpose common to all investigations in the Energy Lands Program is to provide timely earth-science information for use by managers, policy-makers, engineers, scientists, planners, and others, in order to contribute to an environmentally sound, orderly, and safe development of the energy resources of the Nation.

Circular↗
USGS2012

Data collection and compilation for a geodatabase of groundwater, surface-water, water-quality, geophysical, and geologic data, Pecos County Region, Texas, 1930-2011

The U.S. Geological Survey, in cooperation with Middle Pecos Groundwater Conservation District, Pecos County, City of Fort Stockton, Brewster County, and Pecos County Water Control and Improvement District No. 1, compiled groundwater, surface-water, water-quality, geophysical, and geologic data for site locations in the Pecos County region, Texas, and developed a geodatabase to facilitate use of this information. Data were compiled for an approximately 4,700 square mile area of the Pecos County region, Texas. The geodatabase contains data from 8,242 sampling locations; it was designed to organize and store field-collected geochemical and geophysical data, as well as digital database resources from the U.S. Geological Survey, Middle Pecos Groundwater Conservation District, Texas Water Development Board, Texas Commission on Environmental Quality,and numerous other State and local databases. The geodatabase combines these disparate database resources into a simple data model. Site locations are geospatially enabled and stored in a geodatabase feature class for cartographic visualization and spatial analysis within a Geographic Information System. The sampling locations are related to hydrogeologic information through the use of geodatabase relationship classes. The geodatabase relationship classes provide the ability to perform complex spatial and data-driven queries to explore data stored in the geodatabase.

Texas↗
USGS2013

Geophysical logging and geologic mapping data in the vicinity of the GMH Electronics Superfund site near Roxboro, North Carolina

Geologic mapping, the collection of borehole geophysical logs and images, and passive diffusion bag sampling were conducted by the U.S. Geological Survey North Carolina Water Science Center in the vicinity of the GMH Electronics Superfund site near Roxboro, North Carolina, during March through October 2011. The study purpose was to assist the U.S. Environmental Protection Agency in the development of a conceptual groundwater model for the assessment of current contaminant distribution and future migration of contaminants. Data compilation efforts included geologic mapping of more than 250 features, including rock type and secondary joints, delineation of more than 1,300 subsurface features (primarily fracture orientations) in 15 open borehole wells, and the collection of passive diffusion-bag samples from 42 fracture zones at various depths in the 15 wells.

North Carolina↗
USGS1996

Using geochemical and statistical tools to identify irrigated areas that might contain high selenium concentrations in surface water

Ir rigated agriculture has a long history in the Western United States, beginning with Native American Indians. After passage of the Reclamation Act of 1902, the United States Government began building and subsidizing irrigation projects to foster settlement and development of the arid and semi-arid areas of the Western United States (National Research Council, 1989). Precipitation in the mountainous areas of the West (fig. 1) is stored in reservoirs and used for irrigation of farmland. With the development of irrigated agriculture, unforeseen environmental problems have occurred.

Fact Sheet↗
USGS1998

Front Range Infrastructure Resources Project: water-resources activities

Infrastructure, such as roads, buildings, airports, and dams, is built and maintained by use of large quantities of natural resources such as aggregate (sand and gravel), energy, and water. As urban area expand, local sources of these resource are becoming inaccessible (gravel cannot be mined from under a subdivision, for example), or the cost of recovery of the resource becomes prohibitive (oil and gas drilling in urban areas is costly), or the resources may become unfit for some use (pollution of ground water may preclude its use as a water supply). Governmental land-use decision and environmental mandates can further preclude development of natural resources. If infrastructure resources are to remain economically available. current resource information must be available for use in well-reasoned decisions bout future land use. Ground water is an infrastructure resource that is present in shallow aquifers and deeper bedrock aquifers that underlie much of the 2,450-square-mile demonstration area of the Colorado Front Range Infrastructure Resources Project. In 1996, mapping of the area's ground-water resources was undertaken as a U.S. Geological Survey project in cooperation with the Colorado Department of Natural Resources, Division of Water Resources, and the Colorado Water Conservation Board.

Colorado↗
USGS2008

Basin characteristics for selected streamflow-gaging stations in and near West Virginia

Basin characteristics have long been used to develop equations describing streamflow. In the past, flow equations used in West Virginia were based on a few hand-calculated basin characteristics. More recently, the use of a Geographic Information System (GIS) to generate basin characteristics from existing datasets has refined the process for developing equations to describe flow values in the Mountain State. These basin characteristics are described in this document for streamflow-gaging stations in and near West Virginia. The GIS program developed in ArcGIS Workstation by Environmental Systems Research Institute (ESRI?) used data that included National Elevation Dataset (NED) at 1:24,000 scale, climate data from the National Oceanic and Atmospheric Agency (NOAA), streamlines from the National Hydrologic Dataset (NHD), and LandSat-based land-cover data (NLCD) for the period 1999-2003. Full automation of data generation was not achieved due to some inaccuracies in the elevation dataset, as well as inaccuracies in the streamflow-gage locations retrieved from the National Water Information System (NWIS). A Pearson?s correlation examination of the data indicates that several of the basin characteristics are correlated with drainage area. However, the GIS-generated data provide a consistent and documented set of basin characteristics for resource managers and researchers to use.

West Virginia↗
USGS2017

Geophysical logging and thermal imaging near the Hemphill Road TCE National Priorities List Superfund site near Gastonia, North Carolina

Borehole geophysical logs and thermal imaging data were collected by the U.S. Geological Survey near the Hemphill Road TCE (trichloroethylene) National Priorities List Superfund site near Gastonia, North Carolina, during August 2014 through February 2015. In an effort to assist the U.S. Environmental Protection Agency in the development of a conceptual groundwater model for the assessment of current contaminant distribution and future migration of contaminants, surface geological mapping and borehole geophysical log and thermal imaging data collection, which included the delineation of more than 600 subsurface features (primarily fracture orientations), was completed in five open borehole wells and two private supply bedrock wells. In addition, areas of possible groundwater discharge within a nearby creek downgradient of the study site were determined based on temperature differences between the stream and bank seepage using thermal imagery.

North Carolina↗
USGS2018

Evaluation of sockeye salmon after passage through an innovative upstream fish-passage system at Cle Elum Dam, Washington, 2017

Executive Summary The Bureau of Reclamation (Reclamation) and the Washington State Department of Ecology (Ecology), working with the Yakima River Basin Water Enhancement Project Workgroup (composed of representatives of the Yakama Nation; Federal, State, county, and city governments; environmental organizations; and irrigation districts), developed the Yakima Basin Integrated Plan (Integrated Plan). The Integrated Plan identifies a comprehensive approach to water resources and ecosystem restoration improvements in the Yakima Basin to be implemented over a 30-year period. The Integrated Plan includes seven elements: Reservoir fish passage, Structural and operational changes to existing facilities, Surface water storage, Groundwater storage, Habitat/watershed protection and enhancement, Enhanced water conservation, and Market reallocation. The first listed element, reservoir fish passage, will be expensive and take many years to accomplish. Reclamation and Ecology decided to look at new and innovative means to provide passage that could help reduce project cost and construction timing while maintaining survival rates of traditional upstream passage facilities. Reclamation contracted with the U.S. Geological Survey to do a study to evaluate the outcome of passage through one innovative fish-passage system at Cle Elum Dam, the first Integrated Plan reservoir fish-passage project being implemented.

Washington↗
USGS2008

Calibration of a water-quality model for low-flow conditions on the Red River of the North at Fargo, North Dakota, and Moorhead, Minnesota, 2003

A time-of-travel and reaeration-rate study was conducted by the U.S. Geological Survey, in cooperation with the North Dakota Department of Health, the Minnesota Pollution Control Agency, and the cities of Fargo, North Dakota, and Moorhead, Minnesota, to provide information to calibrate a water-quality model for streamflows of less than 150 cubic feet per second. Data collected from September 24 through 27, 2003, were used to develop and calibrate the U.S. Environmental Protection Agency Water Quality Analysis Simulation Program model (hereinafter referred to as the Fargo WASP water-quality model) for a 19.2-mile reach of the Red River of the North. The Fargo WASP water-quality model was calibrated for the transport of dye by fitting simulated time-concentration dye curves to measured time-concentration dye curves. Simulated peak concentrations were within 10 percent of measured concentrations. Simulated traveltimes of the dye cloud centroid were within 7 percent of measured traveltimes. The variances of the simulated dye concentrations were similar to the variances of the measured dye concentrations, indicating dispersion was reproduced reasonably well. Average simulated dissolved-oxygen concentrations were within 6 percent of average measured concentrations. Average simulated ammonia concentrations were within the range of measured concentrations. Simulated dissolved-oxygen and ammonia concentrations were affected by the specification of a single nitrification rate in the Fargo WASP water-quality model. Data sets from August 1989 and August 1990 were used to test traveltime and simulation of dissolved oxygen and ammonia. For streamflows that ranged from 60 to 407 cubic feet per second, simulated traveltimes were within 7 percent of measured traveltimes. Measured dissolved-oxygen concentrations were underpredicted by less than 15 percent for both data sets. Results for ammonia were poor; measured ammonia concentrations were underpredicted by as much as 70 percent for both data sets. Overall, application of the Fargo WASP water-quality model to the 1989 and 1990 data sets resulted in poor agreement between measured and simulated concentrations. This likely is a result of changes in the waste-load composition for the Fargo and Moorhead wastewater-treatment plants as a result of improvements to the wastewater-treatment plants since 1990. The change in waste-load composition probably resulted in a change in decay rates and in dissolved oxygen no longer being substantially depressed downstream from the Moorhead and Fargo wastewater-treatment plants. The Fargo WASP water-quality model is valid for the current (2008) treatment processes at the wastewater-treatment plants.

Minnesota, North Dakota↗
USGS2011

Estimated hydrologic budgets of kettle-hole ponds in coastal aquifers of southeastern Massachusetts

Kettle-hole ponds in southeastern Massachusetts are in good hydraulic connection to an extensive coastal aquifer system that includes the Plymouth-Carver aquifer system on the mainland and aquifers underlying Cape Cod. The ponds receive water from, and contribute water to, the underlying glacial aquifer; ponds also receive water from precipitation and lose water to evaporation from the pond surface. Some ponds are connected to surface-water drainage systems and receive water from or contribute water to streams or adjacent wetlands. The Massachusetts Department of Environmental Protection currently (2011) is developing Total Maximum Daily Loads of phosphorus for the freshwater ponds in the region to maintain the health of pond ecosystems; the amounts and sources of water fluxes into and out of the ponds are important factors in determining the amount of phosphorus that can be assimilated into a pond. To assist in this effort, the U.S. Geological Survey used groundwater-flow models of the coastal aquifer system to estimate hydrologic budgets-including inflows and outflows from the aquifer system and adjacent streams and wetlands, and recharge from precipitation-for 425 ponds in southeastern Massachusetts. Water fluxes through the ponds are a function of several factors, including the size, shape, and bathymetry of the pond, orientation of the pond relative to the regional hydraulic gradient, and hydrologic setting relative to the proximity of groundwater divides and discharge boundaries. Total steady-state fluxes through the ponds range from more than 3,300,000 to less than 2,000 cubic feet per day. For ponds without surface-water inlets or outlets, groundwater inflow accounts for 98 to 3 percent of total inflow; conversely, recharge onto the pond surface accounts for the remainder of inflow (between 2 and 97 percent). All natural flows from these ponds are through recharge from the pond into the aquifer. In one pond, about 94 percent of the total outflow is removed for water supply. For ponds that are connected to surface-water drainages, most inflow and outflow are through streams. Ponds that receive water from streams receive most (58 to 89 percent) of their water from those streams. Ponds that are drained by streams lose between 5 and 100 percent of their water to those streams.

Scientific Investigations Report↗
USGS2018

Prioritization framework for ranking riverine ecosystem stressors using example sites from the Tualatin River Basin, Oregon

As human populations increase, so does their influence over the environment. Altered terrain, degraded water quality, and threatened or endangered species are all-too-common consequences of a growing anthropogenic influence on the landscape. To help manage these effects, researchers have developed new ways to characterize current environmental conditions and help resource managers seek solutions to bring affected areas back to their best attainable health. Before an ecosystem can be improved, however, its current level of ecological stress must be determined. Characterizing environmental conditions at many sites across a landscape helps managers understand the range of current conditions and prioritize where they might focus restoration and protection efforts. This report details the development of a prioritization framework to score riverine ecosystem stressors in a watershed based on example sites from the Tualatin River Basin in northwestern Oregon. The framework incorporated the most influential site-specific stressors throughout the basin built on a long history of data collection. These stressors were characterized with 13 metrics that were organized into 4 groups: hydrologic, water quality, physical habitat, and biological. Each stressor metric used readily accessible data and was translated to a score between 0 and 10. The higher the score, the healthier the site. This initial application of the framework used field observations and measurements to rank site conditions at two Tualatin River sites and four Tualatin River tributary sites. Given the versatility of this framework, it easily could be expanded to include more sites or new metrics, if necessary. Because stressors varied by season, all metrics for the tributary sites were scored separately during the wet season (November through April) and dry season (May through October). Water-quality data were available over a prolonged period; therefore, water-quality metrics were assessed by season and by decade (1990–99 compared to 2000–12) to evaluate long-term stressor trends. Results for the Tualatin River Basin prioritization framework indicated that the urban tributaries demonstrated the greatest stress throughout the year, especially during the dry summer months. Spatially, the upper Tualatin River was healthier than the lower reaches of the river. Water-quality has improved in the last 10 years, mostly due to improvements in the dry period contaminant scores, but challenges remain with high water temperatures and low dissolved-oxygen conditions. The biggest challenge with this type of research derived from inconsistencies within the available data. Both spatial and temporal data gaps must be addressed to improve the prioritization. Incorporating both discrete and continuous datasets into the prioritization framework remains a challenge because the datasets have slightly different information and criteria and are not always comparable. Regardless, this report provides guidelines for developing a prioritization framework that ranks the ecological health of sites in a watershed and provides guidance on management actions for improving conditions by targeting factors that greatly affect the health of river ecosystems.

Oregon↗
USGS2019

Pecos River Basin salinity assessment, Santa Rosa Lake, New Mexico, to the confluence of the Pecos River and the Rio Grande, Texas, 2015

The elevated salinity of the Pecos River throughout much of its length is of paramount concern to water users and water managers. Dissolved-solids concentrations in the Pecos River exceed 3,000 milligrams per liter in many of its reaches in the study area, from Santa Rosa Lake, New Mexico, to the confluence of the Pecos River with the Rio Grande, Texas. The salinity of the Pecos River increases downstream and affects the availability of useable water in the Pecos River Basin. In this report, “salinity” and “dissolved-solids concentration” are considered synonymous; both terms are used to refer to the total ionic concentration of dissolved minerals in water. The sources of salinity in the Pecos River Basin are natural (geologic) and anthropogenic, including but not limited to groundwater discharge, springs, and irrigation return flows. Previous studies in the Pecos River Basin were project specific and designed to address salinity issues in specific parts of the basin; therefore, in 2015, the U.S. Geological Survey in cooperation with the U.S. Army Corps of Engineers, New Mexico Interstate Stream Commission, Texas Commission on Environmental Quality, and Texas Water Development Board assessed the major sources of salinity throughout the extent of the basin where elevated salinity in the Pecos River is well documented (that is, in the drainage area of the Pecos River from Santa Rosa Lake to the confluence of the Pecos River and the Rio Grande). The goal was to gain a better understanding of how specific areas might be contributing to the elevated salinity in the Pecos River and how salinity of the Pecos River has changed over time. This assessment includes a literature review and compilation of previously published salinity-related data, which guided the collection of additional water-quality samples and streamflow gain-loss measurements. Differences in water quality of surface-water and groundwater samples, streamflow measurements, and geophysical data were assessed to gain new insights regarding sources of salinity in the Pecos River Basin and a more detailed assessment of potential areas of elevated salinity in the basin. The datasets compiled for this assessment are available in a companion data release. The literature review identified several potential sources of salinity inputs to the Pecos River in New Mexico and Texas. In New Mexico, sources of salinity inputs included sinkhole springs discharging into El Rito Creek, the Bitter Lake National Wildlife Refuge inflow to the Pecos River, inflow from the Rio Hondo, including the main channel and a restored channel at the Bitter Lake National Wildlife Refuge referred to as the “Rio Hondo spring channel,” the outflow from Lea Lake at Bottomless Lakes State Park, and the Malaga Bend region of the Pecos River. In Texas, sources of salinity inputs included Salt Creek downstream from Red Bluff Reservoir and the area near the Horsehead Crossing ford on the Pecos River. The compilation of historical water-quality data revealed a lack of consistent sampling of the same constituents at the same sites along the main stem of the Pecos River, which results in data gaps that hinder the ability to effectively analyze long-term changes in water quality that may help with the understanding of how salinity in the Pecos River has changed over time and identifying the sources of salinity in the Pecos River Basin. To help fill these data gaps, water-quality and streamflow data were collected in the study area in February 2015 by the U.S. Geological Survey. Historical water-quality data and newly collected data from February 2015 were evaluated for selected major-ion concentrations, dissolved-solids concentrations, and deuterium, oxygen, and strontium isotopes. Analysis of the data indicated several areas of increasing salinity in the Pecos River. Most notable increases were in two subreaches of the river, between Acme, N. Mex., and Artesia, N. Mex., and between Orla, Tex., and Grandfalls, Tex. Increasing sodium and chloride concentrations from Acme to Artesia coincided with changes in isotopic ratios within the Pecos River Basin. Changes in isotopic ratios in this reach indicate a likely inflow from an isotopically different source of water compared to the water in the main stem of the Pecos River, such as groundwater inflow, inflow from surface-water features distinct from the main stem of the Pecos River, or both. In the subreach between Orla and Grandfalls, an increase in dissolved-solids concentrations was observed along with a shift in isotope values, indicating that neither evaporative processes in Red Bluff Reservoir nor inflow from Salt Creek likely solely influences the salinity of the Pecos River in this subreach. The highest dissolved-solids concentrations in the Pecos River Basin were measured downstream from Grandfalls, where dissolved-solids concentrations are greater than 16,000 milligrams per liter near Iraan, Tex. Changes in isotopic values (deuterium, oxygen, and strontium) indicate mixing of different waters at several areas along the main stem of the Pecos River. The spatial distribution of the areas of interest from the literature review and the water-quality data are available in the companion data release.

Texas, New Mexico↗
USGS2021

Use of dissolved oxygen monitoring to evaluate phosphorus loading in Connecticut streams, 2015–18

The Connecticut Department of Energy and Environmental Protection (CT DEEP) has developed an interim phosphorus reduction strategy to establish water-quality-based phosphorus limits in nontidal freshwaters for industrial and municipal water pollution control facilities. A recommendation in the strategy included the addition of diurnal dissolved oxygen (DO) sampling to the sampling of diatom communities collected by CT DEEP. The chemistry data coupled with biological data will help to examine the effects of phosphorus loading in streams. The U.S. Geological Survey (USGS), in cooperation with the CT DEEP and New England Interstate Water Pollution Control Commission, implemented a summer DO monitoring program from 2015 to 2018 to examine the effects of phosphorus loading in streams. Continuous DO data were collected at 18 sites in streams with varying concentrations of phosphorus throughout the State of Connecticut. Discrete water-quality nutrient data were collected by the USGS at 11 of the 18 sites. All continuous and discrete data collected from June to September for the 4 years were examined for all sites. This report documents a pattern of diurnal DO for monitoring sites across 4 years and presents estimated daily gross primary productivity (GPP), ecosystem respiration (ER), and a standardized rate coefficient for gas exchange for selected streams. Relations of phosphorus concentrations to the diurnal DO response and stream metabolism are described. Interannual variability in average annual total phosphorus (TP) concentrations and maximum daily DO concentrations were evaluated among sites in years of the study. Streams identified as impaired by CT DEEP such as Naugatuck River at Beacon Falls (USGS station 01208500), Still River at Route 7 at Brookfield Center (USGS station 01201487), and Quinnipiac River at Wallingford (USGS station 01196500) had higher TP concentrations (greater than 0.10 milligram per liter [mg/L]) throughout the study. Reference streams considered unimpaired had lower concentrations of TP (less than 0.10 mg/L). The range in daily DO concentrations remained less than 4 mg/L for most of the sites during the study except for Naugatuck River at Beacon Falls and Still River at Route 7 at Brookfield Center. Daily GPP and ER were summarized for 11 sites using the maximum likelihood estimation model of the streamMetabolizer package in the R statistical program. The models indicated that most sites had an estimated negative net primary productivity, based on the daily estimates of GPP and ER, which indicates the systems are heterotrophic and dominated by respiration. The high variation of GPP and ER reported for several sites can be affected by many physical, chemical, and biological factors, including the abundance and community composition of phytoplankton, periphyton, and macrophyte algae present. The variability in mean GPP was similar to the variability in maximum DO concentrations when plotted against annual average TP concentrations for the maximum likelihood estimation model in streamMetabolizer. The concept that phosphorus loading can affect the stream metabolism requires more detailed knowledge of stream geomorphic variables (canopy cover, stream velocity, water depth) and algal communities to help improve the scientific basis for managing phosphorus loading.

Connecticut↗
USGS2003

Development of health-based screening levels for use in state- or local-scale water-quality assessments

The U.S. Geological Survey (USGS) has a need to communicate the significance of the water-quality findings of its National Water-Quality Assessment (NAWQA) Program in a human-health context. Historically, the USGS has assessed water-quality conditions by comparing water concentration data against established drinking-water standards and guidelines. However, because drinking- water standards and guidelines do not exist for many of the contaminants analyzed by the NAWQA Program and other USGS studies, this approach has proven to be insufficient for placing USGS data in a human-health context. To help meet this need, health-based screening level (HBSL) concentrations or ranges are being determined for unregulated compounds (that is, those for which Federal or State drinking-water standards have not been established), using a consensus approach that was developed collaboratively by the USGS, U.S. Environmental Protection Agency(USEPA), New Jersey Department of Environmental Protection, and Oregon Health & Science University. USEPA Office of Water methodologies for calculating Lifetime Health Advisory and Risk-Specific Dose values for drinking water are being used to develop HBSL concentrations (for unregulated noncarcinogens) and HBSL concentration ranges (for most unregulated carcinogens). This report describes the methodologies used to develop HBSL concentrations and ranges for unregulated compounds in State- and local-scale analyses, and discusses how HBSL values can be used as tools in water-quality assessments. Comparisons of measured water concentrations with Maximum Contaminant Level values and HBSL values require that water-quality data be placed in the proper context, with regard to both hydrology and human health. The use of these HBSL concentrations and ranges by USGS will increase by 27 percent the number of NAWQA contaminants for which health-based benchmarks are available for comparison with USGS water-quality data. USGS can use HBSL values to assist the USEPA and State and local agencies by providing them with comparisons of measured water concentrations to scientifically defensible human health-based benchmarks, and by alerting them when measured concentrations approach or exceed these benchmarks.

Water-Resources Investigations Report↗
USGS1966

Salt-water encroachment in southern Nassau and southeastern Queens Counties, Long Island, New York

Test drilling, extraction of water from cores, electric logging, water sampling, and water-level measurements from 1958 to 1961 provided a suitable basis for a substantial refinement in the definition of the positions, chloride concentrations, and rates of movement of salty water in the intermediate and deep deposits of southern Nassau County and southeastern Queens County. Filter-press, centrifugal, and dilution methods were used to extract water from cores for chloride analysis at the test-drilling sites. Chloride analysis of water extracted by these methods, chloride analyses of water from wells, and the interpretation of electric logs helped to define the chloride content of the salty water. New concepts of environmental-water head and zerovels, developed during the investigation, proved useful for defining hydraulic gradients and ratee of flow in ground water of variable density in a vertical direction and in horizontal and inclined planes, respectively. Hydraulic gradients in and between fresh and salty water were determined from water levels from data at individual and multiple-observation wells. Salty ground water occurs in southern Nassau and southeastern Queens Counties as three wedgelike extensions that project landward in unconsolidated deposits from a main body of salty water that lies seaward of the barrier beaches in Nassau County and of Jamaica Bay in Queens County. Salty water occurs not only in permeable deposits but also in the shallow and deep clay deposits. The highest chloride content of the salty ground water in the main body and the wedges is about 16,000 ppm, which is about 1,000 to 2,000 ppm less than the chloride content of ocean water. The shallow salty water in the Pleistocene and Recent deposits is connected freely with the bays, tidal estuaries, and ocean. The intermediate wedge is found only in the southwestern part of Nassau County in the upper part of the Magothy (?) Formation, in the Jamneco Gravel, and in the overlying clay deposits. It extends from the seaward areas inland about 2 miles into Island Park. The deep wedge extends into southeastern Queens County and southern Nassau County principally in the deeper parts of the Magothy (?) Formation and in the underlying clay member of the Raritan Formation. The leading edge of the deep wedge is at the base of the Magothy (?) Formation. This edge is apparently at the shoreline east of Lido Beach and extends inland about 4 miles to Woodmere and about 7 miles to South Ozone Park. Zones of diffusion as much as 6 miles wide and about 500 feet thick were delineated in the frontal part of the salty-water wedges. These thick and broad zones of diffusion were probably formed during the past 1,000 or more years in heterogeneous unconsolidated deposits by long- and short-term changes in sea level and in fresh-water outflow to the sea and by dispersion caused by the movements of the water and its salt mass. Changes in sea level and fresh-water outflow together produced appreciable advances and recessions of the salt-water front. The chemical compositions of the diffused water in all wedges are modified to some extent by base exchange and other physical and chemical processes and also by diffusion. The intermediate wedge of salty water is moving landward at a rate of less than 20 feet a year in the vicinity of Island Park and, thus, has moved less than 1,000 feet since 1900. The leading edge of the deep wedge has advanced landward at about 300 feet a :ear in Woodmere in southwestern Nassau County and about 160 feet a year at South Ozone Park in southeastern Queens County, principally under the influence of local withdrawals near the toe of the wedge. Between Hewlett and Lido Beach, the deep wedge is moving inland at the rate of about 10 feet a year under the influence of regional withdrawals in inland areas. Regional encroachment of the deep wedge is apparently retarded appreciably by cyclic flow, that is, by the return seaward in the upper

Water Supply Paper↗
USGS2018

Correlating sea lamprey density with environmental DNA detections in the lab

Invasive sea lamprey (Petromyzon marinus Linnaeus, 1758) are currently managed by the Great Lakes Fishery Commission in an effort to reduce pest populations below levels that cause ecological damage. One technique to improve stream population assessments could be molecular surveillance in the form of environmental DNA (eDNA) monitoring. We developed and validated four probe-based quantitative polymerase chain reaction (qPCR) assays, then used two probes (cytb, nd1) to determine whether eDNA concentration was correlated with adult and larval sea lamprey density in the lab. We found a strong positive correlation between adult sea lamprey densities of 2, 20, and 200 individuals/2000L and eDNA concentrations in tanks using both assays (cytb, nd1). For larval laboratory tank density trials, eDNA concentrations were generally near our limit of quantification and there was no significant difference in copy numbers detected between larval sea lamprey densities of 1, 5, and 25 individuals/28L. Therefore, we examined detection probability rather than concentration with laboratory tank densities. We observed a trend of increasing detection probabilities with increased larval sea lamprey density that approached significance suggesting that when DNA copy numbers are low, detection rates may be more informative in predicting varying densities of larval sea lamprey. The ability to assess sea lamprey densities from a water sample could be a powerful tool to improve traditional assessment and stream ranking techniques. Further refinement of this method in the field may make eDNA surveillance of sea lamprey a reliable part of stream assessments. Rapid eDNA analysis from many streams may help focus traditional assessment efforts, thereby improving the efficiency of invasive sea lamprey control efforts.

Management of Biological Invasions↗
USGS2017

Guidance documents: Continued support to improve operations of fish hatcheries and field sites to reduce the impact or prevent establishment of New Zealand Mudsnails and other invasive mollusks

This project tested and revised a risk assessment/management tool authored by Moffitt and Stockton designed to provide hatchery biologists and others a structure to measure risk and provide tools to control, prevent or eliminate invasive New Zealand mudsnails (NZMS) and other invasive mollusks in fish hatcheries and hatchery operations. The document has two parts: the risk assessment tool, and an appendix that summarizes options for control or management. The framework of the guidance document for risk assessment/hatchery tool combines approaches used by the Hazard Analysis and Critical Control Points (HACCP) process with those developed by the Commission for Environmental Cooperation (CEC), of Canada, Mexico, and the United States, in the Tri-National Risk Assessment Guidelines for Aquatic Alien Invasive Species. The framework approach for this attached first document assesses risk potential with two activities: probability of infestation and consequences of infestation. Each activity is treated equally to determine the risk potential. These two activities are divided into seven basic elements that utilize scientific, technical, and other relevant information in the process of the risk assessment. To determine the probability of infestation four steps are used that have scores reported or determined and averaged. This assessment follows a familiar HACCP process to assess pathways of entry, entry potential, colonization potential, spread potential. The economic, environmental and social consequences are considered as economic impact, environmental impact, and social and cultural influences. To test this document, the Principal Investigator worked to identify interested hatchery managers through contacts at regional aquaculture meetings, fish health meetings, and through the network of invasive species managers and scientists participating in the Western Regional Panel on Aquatic Nuisance Species and the 100th Meridian Initiative's Columbia River Basin Team, and the Western New Zealand Mudsnail Conference in Seattle. Targeted hatchery workshops were conducted with staff at Dworshak National Fish Hatchery Complex (ID), Similkameen Pond, Oroville WA, and Ringold Springs State Hatchery (WA). As a result of communications with hatchery staff, invasive species managers, and on site assessments of hatchery facilities, the document was modified and enhanced. Additional resources were added to keep it up to date. The result is a more simplified tool that can lead hatchery or management personnel through the process of risk assessment and provide an introduction to the risk management and communication process. In addition to the typical HACCP processes, this tool adds steps to rate and consider uncertainty and the weight of evidence regarding options and monitoring results . Uncertainty of outcome exists in most tools that can be used to control or prevent NZMS or other invasive mollusks from infesting an area. In additional this document emphasizes that specific control tools and plans must be tailored to each specific setting to consider the economic, environmental and social influences. From the testing and evaluation process, there was a strong recognition that a number of control and prevention tools previously suggested and reported in the literature from laboratory and small scale trials may not be compatible with regional and national regulations, economic constraints, social or cultural constraints, engineering or water chemistry characteristics of each facility. The options for control are summarized in the second document, Review of Control Measures for Hatcheries Infested with NZMS (Appendix A) that provides sources for additional resources and specific tools, and guidance regarding the feasibility and success of each approach. This tool also emphasizes that management plans need to be adaptive and incorporate oversight from professionals familiar with measuring risks of fish diseases, and treatments (e.g. the fish health practitioners and water quality and effluent management teams). Finally, with such a team, the adaptive management approach must be ongoing, and become a regular component of hatchery operations. Although it was the intent that this two part document would be included as part of the revised National Management and Control Plan for the NZMS proposed by the U.S. Fish and Wildlife Service (USFWS) and others, it is provided as a stand-alone document.

Cooperator Science Series↗