USGS Science⌕ Search

SEARCH · USGS Science

Results for “Atmospheric Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24Linked to original sources
USGS2003

Imaging spectroscopy: Earth and planetary remote sensing with the USGS Tetracorder and expert systems

Imaging spectroscopy is a tool that can be used to spectrally identify and spatially map materials based on their specific chemical bonds. Spectroscopic analysis requires significantly more sophistication than has been employed in conventional broadband remote sensing analysis. We describe a new system that is effective at material identification and mapping: a set of algorithms within an expert system decision‐making framework that we call Tetracorder. The expertise in the system has been derived from scientific knowledge of spectral identification. The expert system rules are implemented in a decision tree where multiple algorithms are applied to spectral analysis, additional expert rules and algorithms can be applied based on initial results, and more decisions are made until spectral analysis is complete. Because certain spectral features are indicative of specific chemical bonds in materials, the system can accurately identify and map those materials. In this paper we describe the framework of the decision making process used for spectral identification, describe specific spectral feature analysis algorithms, and give examples of what analyses and types of maps are possible with imaging spectroscopy data. We also present the expert system rules that describe which diagnostic spectral features are used in the decision making process for a set of spectra of minerals and other common materials. We demonstrate the applications of Tetracorder to identify and map surface minerals, to detect sources of acid rock drainage, and to map vegetation species, ice, melting snow, water, and water pollution, all with one set of expert system rules. Mineral mapping can aid in geologic mapping and fault detection and can provide a better understanding of weathering, mineralization, hydrothermal alteration, and other geologic processes. Environmental site assessment, such as mapping source areas of acid mine drainage, has resulted in the acceleration of site cleanup, saving millions of dollars and years in cleanup time. Imaging spectroscopy data and Tetracorder analysis can be used to study both terrestrial and planetary science problems. Imaging spectroscopy can be used to probe planetary systems, including their atmospheres, oceans, and land surfaces.

Journal of Geophysical Research E: Planets↗
USGS1996

Phytoplankton bloom dynamics in coastal ecosystems: A review with some general lessons from sustained investigation of San Francisco Bay, California

Phytoplankton blooms are prominent features of biological variability in shallow coastal ecosystems such as estuaries, lagoons, bays, and tidal rivers. Long-term observation and research in San Francisco Bay illustrates some patterns of phytoplankton spatial and temporal variability and the underlying mechanisms of this variability. Blooms are events of rapid production and accumulation of phytoplankton biomass that are usually responses to changing physical forcings originating in the coastal ocean (e.g., tides), the atmosphere (wind), or on the land surface (precipitation and river runoff). These physical forcings have different timescales of variability, so algal blooms can be short-term episodic events, recurrent seasonal phenomena, or rare events associated with exceptional climatic or hydrologic conditions. The biogeochemical role of phytoplankton primary production is to transform and incorporate reactive inorganic elements into organic forms, and these transformations are rapid and lead to measurable geochemical change during blooms. Examples include the depletion of inorganic nutrients (N, P, Si), supersaturation of oxygen and removal of carbon dioxide, shifts in the isotopic composition of reactive elements (C, N), production of climatically active trace gases (methyl bromide, dimethylsulfide), changes in the chemical form and toxicity of trace metals (As, Cd, Ni, Zn), changes in the biochemical composition and reactivity of the suspended particulate matter, and synthesis of organic matter required for the reproduction and growth of heterotrophs, including bacteria, zooplankton, and benthic consumer animals. Some classes of phytoplankton play special roles in the cycling of elements or synthesis of specific organic molecules, but we have only rudimentary understanding of the forces that select for and promote blooms of these species. Mounting evidence suggests that the natural cycles of bloom variability are being altered on a global scale by human activities including the input of toxic contaminants and nutrients, manipulation of river flows, and translocation of species. This hypothesis will be a key component of our effort to understand global change at the land-sea interface. Pursuit of this hypothesis will require creative approaches for distinguishing natural and anthropogenic sources of phytoplankton population variability, as well as recognition that the modes of human disturbance of coastal bloom cycles operate interactively and cannot be studied as isolated processes.

California↗
USGS2006

Interpolation of reconnaissance multibeam bathymetry from north-central Long Island Sound

Introduction The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA) and the Connecticut Department of Environmental Protection (CT DEP), has produced detailed maps of the sea floor in Long Island Sound, a major East Coast estuary surrounded by the most densely populated region of the United States (fig. 1). The current phase of this cooperative research program is directed toward studies of sea-floor topography and its effect on the distributions of sedimentary environments and benthic communities. Because anthropogenic wastes, toxic chemicals, and changes in land-use patterns resulting from residential, commercial, and recreational development have stressed the environment of the Sound, causing degradation and potential loss of benthic habitats (Koppelman and others, 1976; Long Island Sound Study, 1994), detailed maps of the sea floor are needed to help evaluate the extent of adverse impacts and to help manage resources wisely in the future.

Connecticut, New York↗
USGS2015

Remote sensing systems – Platforms and sensors: Aerial, satellites, UAVs, optical, radar, and LiDAR

The American Society of Photogrammetry and Remote Sensing defined remote sensing as the measurement or acquisition of information of some property of an object or phenomenon, by a recording device that is not in physical or intimate contact with the object or phenomenon under study (Colwell et al., 1983). Environmental Systems Research Institute (ESRI) in its geographic information system (GIS) dictionary defines remote sensing as “collecting and interpreting information about the environment and the surface of the earth from a distance, primarily by sensing radiation that is naturally emitted or reflected by the earth’s surface or from the atmosphere, or by sending signals transmitted from a device and reflected back to it (ESRI, 2014).” The usual source of passive remote sensing data is the measurement of reflected or transmitted electromagnetic radiation (EMR) from the sun across the electromagnetic spectrum (EMS); this can also include acoustic or sound energy, gravity, or the magnetic field from or of the objects under consideration. In this context, the simple act of reading this text is considered remote sensing. In this case, the eye acts as a sensor and senses the light reflected from the object to obtain information about the object. It is the same technology used by a handheld camera to take a photograph of a person or a distant scenic view. Active remote sensing, however, involves sending a pulse of energy and then measuring the returned energy through a sensor (e.g., Radio Detection and Ranging [RADAR], Light Detection and Ranging [LiDAR]). Thermal sensors measure emitted energy by different objects. Thus, in general, passive remote sensing involves the measurement of solar energy reflected from the Earth’s surface, while active remote sensing involves synthetic (man-made) energy pulsed at the environment and the return signals are measured and recorded.

Book chapter↗
USGS2012

Applications of mineral surface chemistry to environmental problems

Environmental surface chemistry involves processes that occur at the interface between the regolith, hydrosphere and atmosphere. The more limited scope of the present review addresses natural and anthropogenically-induced inorganic geochemical reactions between solutes in surface and ground waters and soil and aquifer substrates. Important surficial reactions include sorption, ion exchange, dissolution, precipitation and heterogeneous oxidation/reduction processes occurring at the solid/aqueous interface. Recent research advances in this field have addressed, both directly and indirectly, societal issues related to water quality, pollution, biogeochemical cycling, nutrient budgets and chemical weathering related to long term global climate change. This review will include recent advances in the fundamental and theoretical understanding of these surficial processes, breakthroughs in experimental and instrumental surface characterization, and development of methodologies for field applications.

Reviews of Geophysics↗
USGS1978

On the development of strong-motion instrument networks in the United States

This report outlines a plan for the distribution of strong-motion instrumentation throughout the United States. The present "national" network of strong-motion instrumentation has evolved through the merger of several programs initiated by different agencies and organizations with objectives ranging from research to regulation. It is the result of the coordination of instrument maintenance and record archival currently provided by the Seismic Engineering Branch of the U.S. Geological Survey (formerly the Seismological Field Survey of the U.S. Coast & Geodetic Survey, or the National Ocean Survey, or the National Oceanic and Atmospheric Administration). The USGS operates the program under funding from the National Science Foundation (NSF) in cooperation with other federal, state, and local agencies. NSF supports a data management function and the operation of a network of about 200 accelerographs and 300 seismoscopes utilized for studies of ground motion and building response. The State of California is developing its own strong-motion instrumentation program (CSMIP), which includes measurements of ground motion as well as the response of representative types of structures. The CSMIP network is the largest network operated by a single agency anywhere in the world. Eventually it will contain a total of about 1000 accelerographs. The Army Corps of Engineers (COE) is developing a program for monitoring the response of earth dams, which eventually will include as many as 400 instruments on over 100 dams. Other agencies and organizations are developing networks appropriate to their missions or objectives. At present the number of instruments owned by these other agencies is less than 100 in each case, although several agencies are still expanding their networks. The present distribution of accelerographs in the United States is indicated in Figure 1 (see: USGS, 1977, also). In 1964 the cities of Los Angeles and Beverly Hills, California passed ordinances which required 3 accelerographs to be installed in all high-rise buildings. Initially, these instruments were installed and maintained as a part of the strong-motion program of the Seismological Field Survey (SFS). As the number of installations required by such codes increased, it became apparent that the maintenance of these instruments placed an inordinate burden on and created an imbalance in the SFS operated program (in 1972, 50 percent of the "national" program was concentrated in Los Angeles). With the transfer of the SFS program responsibility to the NSF and with the development of the CSMIP, the responsibility for maintenance of code required instruments has reverted to the city building officials and the building owners. As the coordinated network of strong-motion instruments has grown, the maintenance of the instruments has required a larger staff than the USGS could provide under existing personnel ceilings. This situation has been resolved by the agencies with the larger networks performing their own installation and maintenance. The USGS maintains an archive of first class copies of all records, whereas other agencies maintain archives of their own records, only. In addition, the USGS coordinates the routine processing of all of the significant records, although other agencies will process their own data if they consider it to have a higher priority than does the USGS. In response to a recent change in their legislated charter, the CSMIP is beginning to develop a capability to process the data collected under that program.

Open-File Report↗
USGS2023

Future climate-induced changes in mixing and deep oxygen content of a caldera lake with hydrothermal heat and salt inputs

Vertical profiles of temperature, salinity and dissolved oxygen in Crater Lake, a caldera lake in the Oregon Cascade Range that receives hydrothermal inputs of heat and salt, were simulated with a 1-dimensional model. Twelve Global Circulation Models and two Representative Concentration Pathways (RCPs) were used to develop boundary conditions from 1950 to 2099. The model simulated the ventilation of deep water initiated by reverse stratification and subsequent thermobaric instability. All models predicted a reduction in the frequency of deep ventilation events, from an ensemble median frequency of 5.4 winters decade−1 during 1950–2005 to 4.3 (RCP4.5) or 2.5 (RCP8.5) winters decade−1 during 2045–2099. Favorable conditions for thermobaric instability-induced mixing currently occur infrequently and will become rare in the future. The salinity gradient resulting from hydrothermal inputs presents an additional barrier to thermobaric instability that will continue through 2099. A redistribution of salt to the deep lake may prevent ventilation all the way to the bottom in the future. Hypolimnetic dissolved oxygen percent saturation remained above 75% within the 21st century, consistent with oligotrophy and very small oxygen demands. The rate of change in all variables accelerated approaching 2099, coincident with elimination of winter reverse stratification. Historically, about half of the hydrothermal heat added to Crater Lake has been vented to the atmosphere. In the RCP8.5 scenario, the hydrothermal heat will cease to be vented to the atmosphere by the end of the 21st century, and then the temperature of the deep waters will increase rapidly.

Oregon↗
USGS2001

Use of 17 O/ 16 O to trace atmospherically-deposited sulfate in surface waters: A case study in alpine watersheds in the Rocky Mountains

Building on the discovery of excess 17 O in atmospheric sulfate by Lee et al. (2001), we have carried out a case study to determine whether 17 O might provide a new tool for quantifying the impact of atmospheric deposition on surface-water sulfate loads. In Rocky Mountain alpine regions, excess 17 O was found to be characteristics of atmospheric sulfate deposited in snow. Excess 17 O was also evident in stream sulfate in one of two high-elevation watersheds where analyses were made. Isotope mass balance calculations gave surprizingly low atmospheric contributions to stream sulfate suggesting that (1) despite abundant outcrop and sparse soil in these areas, significant sulfate may be taken up and released by soil microbes before being exported in streams, and (2) surface waters can carry multiple non-atmospheric sulfate types, some possibly anthropogenic. Measurements of 17 O may prove very useful in studies of sulfate behavior in a variety of surficial environments.

Geophysical Research Letters↗
USGS1996

A scan-angle correction for thermal infrared multispectral data using side lapping images

Thermal infrared multispectral scanner (TIMS) images, acquired with side lapping flight lines, provide dual angle observations of the same area on the ground and can thus be used to estimate variations in the atmospheric transmission with scan angle. The method was tested using TIMS aircraft data for six flight lines with about 30% sidelap for an area within Joshua Tree National Park, California. Generally the results correspond to predictions for the transmission scan-angle coefficient based on a standard atmospheric model although some differences were observed at the longer wavelength channels. A change was detected for the last pair of lines that may indicate either spatial or temporal atmospheric variation. The results demonstrate that the method provides information for correcting regional survey data (requiring multiple adjacent flight lines) that can be important in detecting subtle changes in lithology.

Geophysical Research Letters↗
USGS2014

Tracking changes in volcanic systems with seismic Interferometry

The detection and evaluation of time-dependent changes at volcanoes form the foundation upon which successful volcano monitoring is built. Temporal changes at volcanoes occur over all time scales and may be obvious (e.g., earthquake swarms) or subtle (e.g., a slow, steady increase in the level of tremor). Some of the most challenging types of time-dependent change to detect are subtle variations in material properties beneath active volcanoes. Although difficult to measure, such changes carry important information about stresses and fluids present within hydrothermal and magmatic systems. These changes are imprinted on seismic waves that propagate through volcanoes. In recent years, there has been a quantum leap in the ability to detect subtle structural changes systematically at volcanoes with seismic waves. The new methodology is based on the idea that useful seismic signals can be generated “at will” from seismic noise. This means signals can be measured any time, in contrast to the often irregular and unpredictable times of earthquakes. With seismic noise in the frequency band 0.1–1 Hz arising from the interaction of the ocean with the solid Earth known as microseisms, researchers have demonstrated that cross-correlations of passive seismic recordings between pairs of seismometers yield coherent signals (Campillo and Paul 2003; Shapiro and Campillo 2004). Based on this principle, coherent signals have been reconstructed from noise recordings in such diverse fields as helioseismology (Rickett and Claerbout 2000), ultrasound (Weaver and Lobkis 2001), ocean acoustic waves (Roux and Kuperman 2004), regional (Shapiro et al. 2005; Sabra et al. 2005; Bensen et al. 2007) and exploration (Draganov et al. 2007) seismology, atmospheric infrasound (Haney 2009), and studies of the cryosphere (Marsan et al. 2012). Initial applications of ambient seismic noise were to regional surface wave tomography (Shapiro et al. 2005). Brenguier et al. (2007) were the first to use ambient noise tomography (ANT) to map the 3D structure of a volcanic interior (at Piton de la Fournaise). Subsequent studies have imaged volcanoes with ANT at Okmok (Masterlark et al. 2010), Toba (Stankiewicz et al. 2010), Katmai (Thurber et al. 2012), Asama (Nagaoka et al. 2012), Uturuncu (Jay et al. 2012), and Kilauea (Ballmer et al. 2013b). In addition, Ma et al. (2013) have imaged a scatterer in the volcanic region of southern Peru by applying array techniques to ambient noise correlations. Prior to and in tandem with the development of ANT, researchers discovered that repeating earthquakes, which often occur at volcanoes, could be used to monitor subtle time-dependent changes with a technique known as the doublet method or coda wave interferometry (CWI) (Poupinet et al. 1984; Roberts et al. 1992; Ratdomopurbo and Poupinet 1995; Snieder et al. 2002; Pandolfi et al. 2006; Wegler et al. 2006; Martini et al. 2009; Haney et al. 2009; De Angelis 2009; Nagaoka et al. 2010; Battaglia et al. 2012; Erdem and Waite 2005; Hotovec-Ellis et al. 2014). Chaput et al. (2012) have also used scattered waves from Strombolian eruption coda at Erebus volcano to image the reflectivity of the volcanic interior with body wave interferometry. However, CWI in its original form was limited in that repeating earthquakes, or doublets, were not always guaranteed to occur. With the widespread use of noise correlations in seismology following the groundbreaking work by Campillo and Paul (2003) and Shapiro et al. (2005), it became evident that the nature of the ambient seismic field, due to its oceanic origin, enabled the continuous monitoring of subtle, time-dependent changes at both fault zones (Wegler and Sens-Schönfelder 2007; Brenguier et al. 2008b; Wegler et al. 2009; Sawazaki et al. 2009; Tatagi et al. 2012) and volcanoes (Sens-Schönfelder and Wegler 2006; Brenguier et al. 2008a) without the need for repeating earthquakes. Seismic precursors to eruptions based on ambient noise we

Book chapter↗
USGS2015

Effects of climate change on long-term population growth of pronghorn in an arid environment

Climate often drives ungulate population dynamics, and as climates change, some areas may become unsuitable for species persistence. Unraveling the relationships between climate and population dynamics, and projecting them across time, advances ecological understanding that informs and steers sustainable conservation for species. Using pronghorn ( Antilocapra americana ) as an ecological model, we used a Bayesian approach to analyze long-term population, precipitation, and temperature data from 18 populations in the southwestern United States. We determined which long-term (12 and 24 months) or short-term (gestation trimester and lactation period) climatic conditions best predicted annual rate of population growth (λ). We used these predictions to project population trends through 2090. Projections incorporated downscaled climatic data matched to pronghorn range for each population, given a high and a lower atmospheric CO 2 concentration scenario. Since the 1990s, 15 of the pronghorn populations declined in abundance. Sixteen populations demonstrated a significant relationship between precipitation and λ, and in 13 of these, temperature was also significant. Precipitation predictors of λ were highly seasonal, with lactation being the most important period, followed by early and late gestation. The influence of temperature on λ was less seasonal than precipitation, and lacked a clear temporal pattern. The climatic projections indicated that all of these pronghorn populations would experience increased temperatures, while the direction and magnitude of precipitation had high population-specific variation. Models predicted that nine populations would be extirpated or approaching extirpation by 2090. Results were consistent across both atmospheric CO 2 concentration scenarios, indicating robustness of trends irrespective of climatic severity. In the southwestern United States, the climate underpinning pronghorn populations is shifting, making conditions increasingly inhospitable to pronghorn persistence. This realization informs and steers conservation and management decisions for pronghorn in North America, while exemplifying how similar research can aid ungulates inhabiting arid regions and confronting similar circumstances elsewhere.

Ecosphere↗
USGS2011

Geology for a changing world 2010-2020-Implementing the U.S. Geological Survey science strategy

This report describes a science strategy for the geologic activities of the U.S. Geological Survey (USGS) for the years 2010-2020. It presents six goals with accompanying strategic actions and products that implement the science directions of USGS Circular 1309, 'Facing Tomorrow's Challenges-U.S. Geological Survey Science in the Decade 2007-2017.' These six goals focus on providing the geologic underpinning needed to wisely use our natural resources, understand and mitigate hazards and environmental change, and understand the relationship between humans and the environment. The goals emphasize the critical role of the USGS in providing long-term research, monitoring, and assessments for the Nation and the world. Further, they describe measures that must be undertaken to ensure geologic expertise and knowledge for the future. The natural science issues facing today's world are complex and cut across many scientific disciplines. The Earth is a system in which atmosphere, oceans, land, and life are all connected. Rocks and soils contain the answers to important questions about the origin of energy and mineral resources, the evolution of life, climate change, natural hazards, ecosystem structures and functions, and the movements of nutrients and toxicants. The science of geology has the power to help us understand the processes that link the physical and biological world so that we can model and forecast changes in the system. Ensuring the success of this strategy will require integration of geological knowledge with the other natural sciences and extensive collaboration across USGS science centers and with partners in Federal, State, and local agencies, academia, industry, nongovernmental organizations and, most importantly, the American public. The first four goals of this report describe the scientific issues facing society in the next 10 years and the actions and products needed to respond to these issues. The final two goals focus on the expertise and infrastructure needed to ensure the long-term sustainability of the geological sciences in the USGS. The ultimate goal of USGS science and of the strategy laid out in this document is to contribute to the development of a sustainable society that operates in harmony with the Earth systems that society depends upon. As we begin the second decade of the 21st century, our Nation faces growing challenges in resource availability, climate and environmental change, and natural hazards. Meeting these challenges will require strong collaboration across the natural and social sciences and extensive partnerships with both the public and private sectors. The six goals described in this document represent a mix of scientific focus areas and operational necessities that together provide a comprehensive roadmap for USGS geologic science to effectively contribute to the USGS mission, providing science for a changing world.

Circular↗
USGS2013

Topobathymetric model of Mobile Bay, Alabama

Topobathymetric Digital Elevation Models (DEMs) are a merged rendering of both topography (land elevation) and bathymetry (water depth) that provides a seamless elevation product useful for inundation mapping, as well as for other earth science applications, such as the development of sediment-transport, sea-level rise, and storm-surge models. This 1/9-arc-second (approximately 3 meters) resolution model of Mobile Bay, Alabama was developed using multiple topographic and bathymetric datasets, collected on different dates. The topographic data were obtained primarily from the U.S. Geological Survey (USGS) National Elevation Dataset (NED) (http://ned.usgs.gov/) at 1/9-arc-second resolution; USGS Experimental Advanced Airborne Research Lidar (EAARL) data (2 meters) (http://pubs.usgs.gov/ds/400/); and topographic lidar data (2 meters) and Compact Hydrographic Airborne Rapid Total Survey (CHARTS) lidar data (2 meters) from the U.S. Army Corps of Engineers (USACE) (http://www.csc.noaa.gov/digitalcoast/data/coastallidar/). Bathymetry was derived from digital soundings obtained from the National Oceanic and Atmospheric Administration’s (NOAA) National Geophysical Data Center (NGDC) (http://www.ngdc.noaa.gov/mgg/geodas/geodas.html) and from water-penetrating lidar sources, such as EAARL and CHARTS. Mobile Bay is ecologically important as it is the fourth largest estuary in the United States. The Mobile and Tensaw Rivers drain into the bay at the northern end with the bay emptying into the Gulf of Mexico at the southern end. Dauphin Island (a barrier island) and the Fort Morgan Peninsula form the mouth of Mobile Bay. Mobile Bay is 31 miles (50 kilometers) long by a maximum width of 24 miles (39 kilometers) with a total area of 413 square miles (1,070 square kilometers). The vertical datum of the Mobile Bay topobathymetric model is the North American Vertical Datum of 1988 (NAVD 88). All the topographic datasets were originally referenced to NAVD 88 and no transformations were made to these input data. The NGDC hydrographic, multibeam, and trackline surveys were transformed from mean low water (MLW) or mean lower low water (MLLW) to NAVD 88 using VDatum (http://vdatum.noaa.gov). VDatum is a tool developed by the National Geodetic Survey (NGS) that performs transformations among tidal, ellipsoid-based, geoid-based, and orthometric datums using calibrated hydrodynamic models. The vertical accuracy of the input topographic data varied depending on the input source. Because the input elevation data were derived primarily from lidar, the vertical accuracy ranges from 6 to 20 centimeters in root mean square error (RMSE). he horizontal datum of the Mobile Bay topobathymetric model is the North American Datum of 1983 (NAD 83), geographic coordinates. All the topographic and bathymetric datasets were originally referenced to NAD 83, and no transformations were made to the input data. The bathymetric surveys were downloaded referenced to NAD 83 geographic, and therefore no horizontal transformations were required. The topbathymetric model of Mobile Bay and detailed metadata can be obtained from the USGS Web sites: http://nationalmap.gov/.

Alabama↗
USGS1998

Carbon storage and late Holocene chronostratigraphy of a Mississippi River deltaic marsh, St. Bernard Parish, Louisiana

Today, the causes, results, and time scale(s) of climate change, past and potential, are the focus of much research, news coverage, and pundit speculation. Many of the US government scientific agencies have some funds earmarked for research into past and (or) future climate change (National Science and Technology Council, 1997). The Mississippi Basin Carbon Project (MBCP) is part of the U.S. Geological Survey (USGS) effort in global change research . The project is motivated by the need to increase our understanding of the role of terrestrial carbon in the global carbon cycle, particularly in the temperate latitudes of North America. The global land area between 30 O and 60 O N is thought to be a large sink for atmospheric CO2 (IPCC, 1996). The identity of this sink is unknown, but is in part the soil and sediment that makes up the upper several meters of the Earth's surface. The MBCP focuses on the Mississippi River basin, the third largest river system in the world (fig. 1), that drains an area of 3.3 x 10 6 km 2 (1.27 x 10 6 mi 2 ). The Mississippi River basin includes more than 40 percent of the land surface, and is the home of more than one-third of the population, of the conterminous United States. Because climate, vegetation, and land use vary greatly within the Mississippi River basin, the primary terrestrial sinks for carbon need to be identified and quantified for representative parts of the basin. The primary goal of the MBCP is to quantify the interactive effects of land-use, erosion, sedimentation, and soil development on carbon storage and nutrient cycles within the Mississippi River basin. The project includes spatial analysis of a wide variety of geographic data, estimation of whole-basin and sub-basin carbon and sediment budgets, development and implementation of terrestrial carbon-cycle models, and site-specific field studies of relevant processes. Areas can be studied and compared, and estimates can be made for whole-basin carbon storage and flux.

Open-File Report↗
USGS2026

Development of projected depth-duration-frequency curves for precipitation in Florida, 2020–59 and 2050–89

The planning, permitting, and design of stormwater-management projects require estimates of the depths of extreme precipitation for current and future events with specified durations and return periods. In this project, precipitation data from six downscaled climate datasets were used to determine changes in precipitation depth-duration-frequency curves from the period 1966–2005 to the periods 2020–59 and 2050–89. The downscaled climate datasets are from the Coupled Model Intercomparison Project Phases 5 and 6 and include (1) Coordinated Regional Downscaling Experiment (CORDEX), (2) Localized Constructed Analogs (LOCA), (3) Multivariate Adaptive Constructed Analogs (MACA), (4) Jupiter Intelligence Weather Research and Forecasting model (JupiterWRF), (5) LOCA version 2 (LOCA2), and (6) National Aeronautics and Space Administration Earth Exchange Global Daily Downscaled Projections (NEX-GDDP). Change factors—multiplicative changes in expected extreme precipitation magnitude from a historical to future period—were computed for grid cells containing National Oceanic and Atmospheric Administration Atlas 14 stations in Florida. Change factors for specific durations and return periods were developed to scale the National Oceanic and Atmospheric Administration Atlas 14 historical depth-duration-frequency values to the periods 2020–59 and 2050–89 on the basis of changes in extreme precipitation derived from six downscaled climate datasets. Overall, a large variation in change factors across downscaled climate datasets was found, with change factors generally being greater than 1 and increasing with return period. In general, median change factors were found to range within 1.01–1.58 for 2020–59 and 1.01–1.63 for 2050–89, depending on the downscaled climate dataset, region, duration, and return period, indicating a projected overall increase in future extreme-precipitation events. When data from all datasets are considered together, median change factors range within 1.04–1.18 for the period 2020–59 and within 1.04–1.23 for the period 2050–89, depending on the region, duration, and return period. Spatial patterns in median change factors were found to vary by dataset.

Florida↗
USGS1973

More on noble gases in Yellowstone National Park hot waters

Water and gas samples from research wells in hydrothermal areas of Yellowstone National Park, U.S.A., have been mass spectrometrically analyzed for their rare gas contents and isotopic composition. In agreement with previous findings, the rare gases have been found to originate from infiltrating run-off water, saturated with air at 10 to 20°C. The atmospheric rare gas retention values found for the water varied between 3 and 87 per cent. The fine structure of the Ar, Kr and Xe abundance pattern in the water reveals fraotionational enrichment of the heavier gases due to partial outgassing of the waters. Radiogenic He and Ar have been detected. No positive evidence for magmatic water contribution has been found. Nevertheless, additions of magmatic waters free of rare gas can not be excluded, but if present the proportion is significantly less than 13 to 36 per cent.

Wyoming↗
USGS2016

Iron oxide minerals in dust-source sediments from the Bodélé Depression, Chad: Implications for radiative properties and Fe bioavailability of dust plumes from the Sahara

Atmospheric mineral dust can influence climate and biogeochemical cycles. An important component of mineral dust is ferric oxide minerals (hematite and goethite) which have been shown to influence strongly the optical properties of dust plumes and thus affect the radiative forcing of global dust. Here we report on the iron mineralogy of dust-source samples from the Bodélé Depression (Chad, north-central Africa), which is estimated to be Earth’s most prolific dust producer and may be a key contributor to the global radiative budget of the atmosphere as well as to long-range nutrient transport to the Amazon Basin. By using a combination of magnetic property measurements, Mössbauer spectroscopy, reflectance spectroscopy, chemical analysis, and scanning electron microscopy, we document the abundance and relative amounts of goethite, hematite, and magnetite in dust-source samples from the Bodélé Depression. The partition between hematite and goethite is important to know to improve models for the radiative effects of ferric oxide minerals in mineral dust aerosols. The combination of methods shows (1) the dominance of goethite over hematite in the source sediments, (2) the abundance and occurrences of their nanosize components, and (3) the ubiquity of magnetite, albeit in small amounts. Dominant goethite and subordinate hematite together compose about 2% of yellow-reddish dust-source sediments from the Bodélé Depression and contribute strongly to diminution of reflectance in bulk samples. These observations imply that dust plumes from the Bodélé Depression that are derived from goethite-dominated sediments strongly absorb solar radiation. The presence of ubiquitous magnetite (0.002–0.57 wt%) is also noteworthy for its potentially higher solubility relative to ferric oxide and for its small sizes, including PM < 0.1 μm. For all examined samples, the average iron apportionment is estimated at about 33% in ferric oxide minerals, 1.4% in magnetite, and 65% in ferric silicates. Structural iron in clay minerals may account for much of the iron in the ferric silicates. We estimate that the mean ferric oxides flux exported from the Bodélé Depression is 0.9 Tg/yr with greater than 50% exported as ferric oxide nanoparticles (<0.1 μm). The high surface-to-volume ratios of ferric oxide nanoparticles once entrained into dust plumes may facilitate increased atmospheric chemical and physical processing and affect iron solubility and bioavailability to marine and terrestrial ecosystems.

Aeolian Research↗
USGS2009

The source of infrasound associated with long-period events at mount St. Helens

During the early stages of the 2004-2008 Mount St. Helens eruption, the source process that produced a sustained sequence of repetitive long-period (LP) seismic events also produced impulsive broadband infrasonic signals in the atmosphere. To assess whether the signals could be generated simply by seismic-acoustic coupling from the shallow LP events, we perform finite difference simulation of the seismo-acoustic wavefield using a single numerical scheme for the elastic ground and atmosphere. The effects of topography, velocity structure, wind, and source configuration are considered. The simulations show that a shallow source buried in a homogeneous elastic solid produces a complex wave train in the atmosphere consisting of P/SV and Rayleigh wave energy converted locally along the propagation path, and acoustic energy originating from , the source epicenter. Although the horizontal acoustic velocity of the latter is consistent with our data, the modeled amplitude ratios of pressure to vertical seismic velocity are too low in comparison with observations, and the characteristic differences in seismic and acoustic waveforms and spectra cannot be reproduced from a common point source. The observations therefore require a more complex source process in which the infrasonic signals are a record of only the broadband pressure excitation mechanism of the seismic LP events. The observations and numerical results can be explained by a model involving the repeated rapid pressure loss from a hydrothermal crack by venting into a shallow layer of loosely consolidated, highly permeable material. Heating by magmatic activity causes pressure to rise, periodically reaching the pressure threshold for rupture of the "valve" sealing the crack. Sudden opening of the valve generates the broadband infrasonic signal and simultaneously triggers the collapse of the crack, initiating resonance of the remaining fluid. Subtle waveform and amplitude variability of the infrasonic signals as recorded at an array 13.4 km to the NW of the volcano are attributed primarily to atmospheric boundary layer propagation effects, superimposed upon amplitude changes at the source.

Washington↗