USGS Science⌕ Search

SEARCH · USGS Science

Results for “Soil Dynamics and Earthquake Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,696 records · Page 23Linked to original sources
USGS2024

Comparing subduction ground-motion models to observations for Cascadia

We evaluate Cascadia subduction ground-motion models (GMMs), considered for the 2023 US National Seismic Hazard Model (NSHM) update, by comparing observations to model predictions. The observations comprise regional recordings from intraslab earthquakes, including contributions from 2021 and 2022 events in southern Cascadia and global records from interface earthquakes. Since the 2018 NSHM update, new GMMs for Cascadia have been published by the Next Generation Attenuation (NGA)-Subduction Project that require independent evaluation. In the regional intraslab comparisons, we highlight a characteristic frequency dependence for Cascadia data, with short periods having lower ground motions and longer periods being comparable to other subduction zones. We evaluate differences in northern and southern Cascadia and find that the NGA-Subduction GMMs developed using southern Cascadia data perform better in this region than the model that did not consider these data. We compare ground-motion variability in Cascadia with the NGA-Subduction model predictions and find differences at short periods ( T = 0.1 s) due to the use of global versus regional data in the development of these models. Moreover, the within-event component of aleatory variability from the GMMs overpredicts the standard deviation of Cascadia recordings at very short periods ( T < 0.05 s). Using global interface earthquakes as a proxy to evaluate the Cascadia GMMs, we find long-period overprediction from a simulation-based GMM and some of the empirical GMMs. When comparing recent observations, we find a similar misfit to GMMs and the 2010 and 2022 Ferndale earthquakes. Finally, we observe different basin amplification factors arising in different subsets of the data, which indicate that differences in basin factors between empirical GMMs could arise from the data selection choices by the developers. As part of evaluating the regional basin terms, we apply basin amplification factors from the magnitude 9 Cascadia earthquake simulations to the empirical GMMs for interface earthquakes. The comparisons presented in this study indicate that the NGA-Subduction GMMs for Cascadia perform well relative to observations and older subduction GMMs.

British Columbia, California, Oregon, Washington↗
USGS2025

Phase 1 technical implementation plan for the expansion of the ShakeAlert earthquake early warning system to Alaska

Executive Summary The conference report accompanying the fiscal year (FY) 2022 Consolidated Appropriations Act (Public Law 117–103) for the U.S. Department of the Interior and related agencies directed the U.S. Geological Survey (USGS) to “work with the State of Alaska to develop an implementation plan to be completed within two years in order to put ShakeAlert/Earthquake Early Warning in Alaska” (p. 29). Congress included $1 million in the FY 2022 appropriation to conduct this effort. The USGS Earthquake Hazards Program, along with partner organizations, has developed the ShakeAlert earthquake early warning (EEW) system for the West Coast, which currently operates in California, Oregon, and Washington. The purpose of the system and its alert delivery partners is to reduce the impact of earthquakes and save lives and property by delivering ShakeAlert-powered alerts that are transmitted to the public via mass notification technologies, and by providing more detailed data streams to institutional users and commercial service providers to trigger automated, user-specific, protective actions. ShakeAlert was designed in such a way that it could be expanded to other U.S. regions with high earthquake risk, after the build-out of seismic and geodetic networks to support ShakeAlert in a specified region is completed and the necessary funding is secured for long-term operation and maintenance. When an earthquake occurs, seismic waves radiate from the rupturing fault like waves on a pond. It is these waves that people feel as earthquake shaking and that can cause damage to structures. Using networks of ground-motion sensors and sophisticated computer algorithms, ShakeAlert can detect an earthquake seconds after it begins, calculate its location and magnitude, and estimate the resulting intensity of shaking. Early warnings of impending shaking are then sent to people and systems that may experience damaging shaking, allowing them to take appropriate protective actions. Depending on the user’s distance from the earthquake, alerts may be delivered before, during, or after the arrival of strong shaking. There will almost always be a region near the earthquake epicenter where alerts arrive after damaging shaking has begun. The ShakeAlert system updates its ground-motion estimates as an earthquake grows larger. In response to the FY 2022 congressional direction, the USGS worked with the State of Alaska to devise this implementation plan for ShakeAlert expansion to Alaska. The USGS engaged with the Alaska Division of Homeland Security and Emergency Management (DHS&EM) and the Alaska Division of Geological and Geophysical Surveys (DGGS). A cooperative agreement was awarded to the Alaska Earthquake Center (AEC) at the University of Alaska Fairbanks (UAF) for their contributions to the plan and their work coordinating with other networks in Alaska. The USGS engaged with the Alaska Seismic Hazards Safety Commission (ASHSC) throughout the process. The USGS also held a series of Alaska stakeholder engagements. The process of developing the implementation plan was facilitated by contracted staff from Corner Alliance, which is a government consulting firm. This implementation plan describes the details and estimates the costs for a Phase 1 expansion of the ShakeAlert system to Alaska. A geographically limited Phase 1 goal was chosen that covers the highest risk and most populated areas of Alaska. The areas proposed encompass the State’s main population centers and 90 percent of the State’s population. This Phase 1 design is considered very challenging and ambitious from the viewpoint of network operators. The lessons learned if this plan is implemented could be used to consider subsequent phases to expand EEW beyond Phase 1 in Alaska in the future. ShakeAlert is built on the foundation of the sensor networks and data processing infrastructure of the USGS-led Advanced National Seismic System (ANSS). This implementation plan calls for a total of 450 high-quality, real-time EEW-capable ANSS seismic stations in Alaska: 270 new stations, 160 upgraded stations, and 20 existing stations. These seismic station numbers are based on a station spacing of 10 kilometers (km) in urban areas, 20 km in seismic source areas that endanger population centers, and 40 km in other areas. The associated costs also include support for some EEW-capable global navigation satellite system (GNSS) stations, with a focus on improving warnings for large subduction zone earthquakes. For effective EEW, ShakeAlert requires low-latency, high-availability, robust telemetry links to deliver continuous, real-time data from field stations to the data centers. The Alaska data processing hardware infrastructure would follow the general design for fail-safe operation that is used for the ShakeAlert system on the West Coast. The ShakeAlert architecture uses two independent layers: the production layer for earthquake processing and the alert layer to make alerting decisions and serve alerts to users. This implementation plan includes two geographically separated data centers in Alaska, each with two fully independent production and alert layers using the same system design developed for the West Coast. As of March 2024, the ShakeAlert system is at version 3.0.1, with more advanced versions in the development and testing pipeline. ShakeAlert originally used two algorithms to determine the location and magnitude of earthquakes using seismic data. A third algorithm that can calculate very large magnitudes of very large earthquakes with geodetic data was added in March 2024. ShakeAlert publishes several data and alert products to meet the needs of different users. All messages include the location of the earthquake, either as a point or a line, and its magnitude. Ground-shaking estimates are published in two forms, as ground-motion contours and a map grid. Providing adequate warning time for strong shaking (the “target threshold”) requires sending alerts at a threshold lower than that strong shaking level (the “alert threshold”). The thresholds for public alerting in Alaska would be a joint USGS and State decision. To have the greatest benefit, ShakeAlert-powered alerts would be delivered to institutional users and individuals by all practical pathways. The USGS alert layer can support thousands of institutional users and alert redistributors, but the USGS does not have the mission nor the infrastructure and expertise to perform mass notifications to the public or implement automatic actions for end users of the alerts. To meet this need, ShakeAlert recruits private sector “technology enablers” that have the necessary expertise to develop end-user implementations using EEW alerts with the goal of stimulating an EEW industry. Earthquake early warning alerts are useless if people do not know how to respond to them. Although the alert messages include instructions about what to do (drop, cover, and hold on), alerts are more effective if people have been trained in advance. Messages about ShakeAlert’s capabilities, limitations, and benefits could be integrated with existing earthquake education programs, including State-run programs. Therefore, ShakeAlert would coordinate with both public and private partners and stakeholders through various partnerships and agreements to accomplish consistent and ongoing public earthquake hazard education. The estimated capital cost of completing the computing infrastructure and sensor networks for the Phase 1 ShakeAlert expansion to Alaska is approximately $66 million in 2024 dollars. The annual operation and maintenance cost of the completed system is estimated to be $12 million per year in 2024 dollars when fully built out.

Alaska↗
USGS2025

What 25+ years of "Did You Feel It" intensities tell us about shaking in California

“When will the Big One happen?” is a question that people often have for earthquake scientists. But while waiting for the “Big One” to occur, people will usually experience frightening or damaging shaking from multiple relatively smaller‐magnitude earthquakes. Given this context, it raises the question: “Where does most of the damage come from?” Could smaller, yet more frequent, earthquakes account for the majority of reported impactful shaking? To explore this question, we consider reports of earthquake damage and felt shaking experiences from a catalog of community‐collected intensity values from the U.S. Geological Survey’s “Did You Feel It?” system. Comparing these intensities to expectations from a ground‐motion model, we find that earthquakes of magnitudes smaller than expected are responsible for most reported intensities of community decimal intensities (CDI) 4.5 and above (moderate and higher shaking intensity levels). (Here “expected value” is meant in its mathematical sense of the mean or equivalently median shaking intensity.) We also present a regional analysis of observed earthquake shaking for specific areas, detailing the maximum intensity experienced within a predetermined area. We identify several instances of M < 4.5 events that generated maximum intensities of CDI > 5 in regions in California surrounding the cities of Eureka, San Francisco, Los Angeles, and San Diego. Our results motivate the need to include smaller‐magnitude earthquakes in communications about earthquake hazard and risk reduction.

California↗
USGS2025

Deterministic physics-based earthquake sequence simulators match empirical ground-motion models and enable extrapolation to data poor regimes: Application to multifault multimechanism ruptures

We use the deterministic earthquake simulator RSQSim to generate complex sequences of ruptures on fault systems used for hazard assessment. We show that the source motions combined with a wave propagation code create surface ground motions that fall within the range of epistemic uncertainties for the Next Generation Attenuation‐West2 set of empirical models. We show the model is well calibrated where there are good data constraints, and has good correspondence in regions with fewer data constraints. We show magnitude, distance, and mechanism dependence all arising naturally from the same underlying friction. The deterministic physics‐based approach provides an opportunity for better understanding the physical origins of ground motions. For example, we find that reduced stress drops in shallow layers relative to constant stress drop with depth lead to peak ground velocities in the near field that better match empirical models. The simulators may also provide better extrapolations into regimes that are poorly empirically constrained by data because physics, rather than surface shaking data parameterizations, is underlying the extrapolations. Having shown the model is credible, we apply it to a problem where observations are lacking. We examine the case of crustal faults above a shallow subduction interface seen to break coseismically in simulations of the New Zealand fault system. These types of events were left out of consideration in the most recent New Zealand national seismic hazard model due to the modeling complexity and lack of observational data to constrain ground‐motion models (GMMs). Here, we show that in the model, by breaking up the coseismic crustal and interface rupturing fault motions into two separate subevents, and then recombining the resulting ground‐motion measures in a square‐root‐of‐sum‐of‐squares incoherent manner, we reproduce well the ground‐motion measures from the full event rupture. This provides a new method for extrapolating GMMs to more complex multifault ruptures.

Seismological Research Letters↗
USGS2025

Shallow geologic framework of the Mississippi Sound and the potential for sediment resources

The Mississippi Sound, an estuarine environment located between the mainland and barrier islands bordering the northern Gulf of America (formerly the Gulf of Mexico), serves as a vital ecosystem for the States of Mississippi and Alabama. Spanning approximately 100 kilometers from east to west and covering 1,400 square kilometers, the sound is home to marine industry and ports, and its shallow and brackish waters sustain a diverse array of marine life. Barrier islands along the southern edge of the sound separate the microtidal estuary from the Gulf of America. This protection from gulf wave action mediates current flow within the sound, resulting in predominantly fine-grained sediment deposition along the seafloor. This study, conducted by the U.S. Geological Survey in cooperation with the U.S. Army Corps of Engineers, provides insight on fluvial and tidal processes spanning the past 5,000 years. The report synthesizes existing research to provide a comprehensive overview of the sound geology, from Pleistocene origins to present-day morphology, and utilizes high-resolution single channel seismic profiles and sediment data to identify and map sedimentary deposits and morphologic features at and below the seafloor. Despite its ecological significance, the Mississippi Sound faces environmental challenges, including water-quality issues, habitat degradation, storm-induced erosion, and the ongoing threats of sea-level rise and environmental changes. This study uses the present-day understanding of the sound's geology to inform coastal management decisions, hazard assessment, and potential mineral resources.

Louisiana, Mississippi↗
USGS2025

Assessment of coastal and fluvial morphodynamic changes using Structure-for-Motion: A case study of the Sfȃntu Gheorghe Mouth (Danube Delta, Romania)

The ability to accurately map erosion, flooding, and habitat loss in coastal environments is crucial for formulating national strategies aimed at preventing and mitigating the impacts of natural disasters. A fundamental component of this process is the implementation of coastal morphodynamics monitoring through Structure-from-Motion (SfM) techniques, utilizing high-resolution 2D/3D data obtained from aerial photogrammetry. To assess morphodynamic changes over a three-year period (2022 – 2024), several SfM-based photogrammetric studies were conducted, each year, in the Romanian sector of the Danube-Black Sea coastal zone, specifically at the mouth of one of the Danube River distributaries (Sf Gheorghe branch) into the Black Sea, and along the left bank, near Sf Gheorghe locality, located within the Danube Delta Biosphere Reserve (DDBR). The essential equipment for aerial photogrammetry comprises Unmanned Aerial Vehicles (UAVs) and Global Navigation Satellite Systems (GNSS). In this study, the UAV used was a DJI Mavic 3T (Enterprise/Thermal) drone, complemented by two Trimble R12i and R4 GNSS systems, as well as approximately 10 Ground Control Points (GCPs). Data acquisition and processing were carried out using specialized photogrammetric software (Agisoft Metashape) along with various GIS tools (e.g., Blue Marble Geographics Global Mapper and ESRI ArcMap). The photogrammetric products generated for the study, as detailed in this paper, include Digital Elevation Models (DEMs), Digital Terrain Models (DTMs), orthomosaics (orthophotos), and others. At Sfântu Gheorghe beach, a comparison between 2023 and 2024 photogrammetric surveys revealed that the left bank of the Sf. Gheorghe Arm, at the river mouth into the Black Sea, suffered from a twist (erosion) of up to 64 metres. Additionally, on the selected perimetre (total area of 31,910 square meters ) from the beach and dune zone of Sf. Gheorghe, an area of up to 16,202 square meters was eroded between 2023 and 2024. This contrasts with the period between 2022 and 2023, during which deposition predominated. Erosion at the Danube mouths and the adjacent Black Sea coastline is driven by a complex interaction of natural and anthropogenic factors. Natural processes, including subsidence, sea-level rise, and episodic extreme storm events, contribute significantly to coastal dynamics. Meanwhile, human-induced factors, such as upstream hydrotechnical works that limits sediment transport, cutting of navigation canals, as well as the exacerbating effects of climate change, further accelerate erosion. The recent Structure-from-Motion (SfM) surveys provide essential quantitative data, enabling a detailed analysis of both short-term and long-term morphodynamic changes influenced by seasonal variations and extreme hydrometeorological events in this highly dynamic coastal system.

Sfȃntu Gheorghe Mouth (Danube Delta)↗
USGS2024

The impact of source time function complexity on stress drop estimates

Earthquake stress drop—a key parameter for describing the energetics of earthquake rupture—can be estimated in several different, but theoretically equivalent, ways. However, independent estimates for the same earthquakes sometimes differ significantly. We find that earthquake source complexity plays a significant role in why theoretically (for simple rupture models) equivalent methods produce different estimates. We apply time‐ and frequency‐domain methods to estimate stress drops for real earthquakes in the SCARDEC (Seismic source ChAracteristics Retrieved from DEConvolving teleseismic body waves, Vallée and Douet, 2016 ) source time function (STF) database and analyze how rupture complexity drives stress‐drop estimate discrepancies. Specifically, we identify two complexity metrics—Brune relative energy (BRE) and spectral decay—that parameterize an earthquake’s complexity relative to the standard Brune model and strongly correlate with the estimate discrepancies. We find that the observed systematic magnitude–stress‐drop trends may reflect underlying changes in STF complexity, not necessarily trends in actual stress drop. Both the decay and BRE parameters vary systematically with magnitude, but whether this magnitude–complexity relationship is real remains unresolved.

Bulletin of the Seismological Society of America↗
USGS2025

Variable partitioning of lithium in rhyolitic melt during decompression and ascent

The partitioning behavior of Li in magmatic systems is increasingly being investigated due to the economic importance of Li in the transition to sustainable energy resources (e.g., batteries). However, at upper crustal pressures, it remains uncertain whether Li preferentially partitions into the vapor or liquid (brine) phase or remains in the silicate melt. This complicates our ability to determine where Li resides—silicate melt, minerals, or fluid phase—upon eruption, a crucial factor for understanding its postdepositional movement and concentration into a brine or volcano-sedimentary deposit. Here, we present a novel investigation into the behavior of Li within natural evolved melts during continuous magma decompression and ascent using melt embayments (open melt inclusions). Mineral-hosted melt embayments preserve records of the evolving composition of the exterior melt, including degassing pathways and ascent timescales, when paired with appropriate diffusion coefficients. Lithium concentration profiles were measured in quartz-hosted melt embayments from the rapidly quenched eruptive phases of five rhyolitic, caldera-forming eruptions to investigate the behavior of Li during magma decompression and ascent, where vapor partitioning and ascent dynamics were previously established by investigating H 2 O and CO 2 profiles. We find that in four systems, embayments contain lower interior Li concentrations than the coerupted melt inclusions; the fifth system contains the same Li concentrations in embayments and melt inclusions. However, many of these embayments contain gradients, with 84 % preserving Li enrichment near the melt-bubble interface, as compared to their interior concentration. We interpret these characteristics to represent two distinct stages of Li partitioning during magma decompression and ascent, in contrast to existing literature that proposes only one type of partitioning behavior. The first stage is interpreted as melt depletion of Li, likely driven by partitioning into an exsolved supercritical fluid phase, supported by the strong correlation between the extent of Li depletion and Cl concentration in the melt, as well as the decompression rate. This behavior then fundamentally shifts, where Li reenriches in the melt, postulated to be driven by the unmixing of the supercritical fluid phase at shallow pressures. For the one system that did not develop Li gradients through decompression, we attribute this to the lower values of Na and Cl in the melt, potentially inhibiting the partitioning of Li into a fluid phase. Importantly, the behavior of Li during decompression is not consistent within or between volcanic centers, highlighting the need for systematic experimental investigation in variable composition melts at pressures relevant to conduit dynamics. This knowledge would improve our ability to model Li profiles to understand magma decompression, and predict where Li resides (e.g., stored in volcanic glass, gas, or crystals) upon eruption prior to any later extraction.

Economic Geology↗
USGS2025

Spatiotemporal variations in strain release and seismic rupture in multifault systems: An example from Panamint Valley, southeastern California

Geometrically complex, multifault ruptures have been observed in recent, damaging earthquakes in southeastern California, sparking renewed efforts to identify physical conditions that promote or inhibit fault discontinuity-spanning coseismic ruptures. The likelihood of ruptures propagating across fault discontinuities is thought to be partly controlled by fault geometries, rupture direction, and the history of strain release. However, these parameters vary in space and time over multiple earthquake cycles, making it difficult to forecast the likelihood that an earthquake on one fault will trigger rupture on a nearby fault. Here we use tectono-geomorphic mapping of a geometrically complex fault zone in Panamint Valley, southeastern California, to assess spatiotemporal variations of paleo-rupture patterns and geometries of fault discontinuities over multiple earthquake cycles. First, we identify ten generations of late Pleistocene to Holocene alluvium using geomorphic parameters and luminescence dating to constrain ages of alluvium and bracket late Holocene earthquake timing. Then, we quantify slip kinematics using high-resolution structure from motion digital surface models. We find the Panamint Valley transtensional relay (PVTR) hosted four late Holocene earthquakes, bracketed to ~5.8–3.4 ka, ~3.8–2.2 ka, ~2.4–0.6 ka, and ~0.64–0.16 ka, with ~0.6–1.1 m of slip per event, correlative to Mw ≈ 6.7–6.9 earthquakes. Additionally, we find similarities in earthquake timing on the Ash Hill, PVTR, and Panamint Valley faults and similarities in the slip magnitude and slip kinematics between the Ash Hill and PVTR faults, implying that the PVTR may co-rupture with nearby faults. Paleo-rupture patterns indicate that seismogenic strain transfer may occur through the PVTR, along different combinations of fault segments and jump distances, over multiple earthquake cycles. These data highlight the utility of tectono-geomorphic mapping in evaluating paleo-rupture patterns and suggest that the PVTR may act to propagate and/or arrest rupture between the Ash Hill and Panamint Valley faults.

California↗
USGS2024

Characterizing directivity in small (M 2.4-5) aftershocks of the Ridgecrest sequence

Directivity, or the focusing of energy along the direction of an earthquake rupture, is a common property of earthquakes of all sizes and can cause increased hazard due to azimuthally dependent ground‐motion amplification. For small earthquakes, the effects of directivity are generally less pronounced due to reduced rupture size, yet the directivity in small events can bias source property estimates and provide important insights into general regional faulting patterns. However, due to observational limitations, directivity is usually only measured and modeled for large events. As such, many studies of small earthquakes either ignore directivity altogether or assume a constant rupture direction for all events in a cluster. In our study, we apply a refined directivity fitting method constrained with two separate methods of source deconvolution to the dataset of aftershocks of the 2019 Ridgecrest earthquakes, which contain a large number of well‐recorded small‐to‐mid sized earthquakes occurring in close proximity to each other. The revealed directivity of 100+ small (M 2.4–5) earthquakes is highly heterogeneous and primarily oblique to and away from the main fault strike, suggesting a complex postseismic stress redistribution. In addition, the energy focusing effect of directivity appears to bias the selection of high‐quality data from stations in the direction of rupture, leading to average stress‐drop increases of 50% if directivity is not accounted for.

California↗
USGS2024

Simulated ground-motion records for the seismic assessment of monumental masonry structures

Earthquakes are natural disasters that can cause widespread devastation and loss of life. Simulated ground-motion records can be useful in regions with limited seismic stations or a history of damaging but infrequent earthquakes. This is especially true in areas with a high concentration of heritage masonry structures, which are especially susceptible to damage, as simulated records can be crucial in predicting their seismic response and protecting these buildings from seismic damage. Despite the importance of simulated earthquakes, few studies have investigated how effective they are compared to real earthquakes when assessing the structural response of heritage buildings. To address this knowledge gap, we employ two different simulation methods of the Mw 6.2 Faial earthquake, which occurred on July 9th, 1998, in the Azores, to replicate the recorded time-series at four available stations within an epicentral distance of 150 km. The study has two objectives: first, to validate the simulated records of the 1998 Faial earthquake using alternative stochastic ground-motion simulation approaches, and second, to determine how these approaches impact the seismic assessment of historic masonry structures. To accomplish these objectives, this study uses real and simulated ground-motion datasets to conduct non-linear response history analyses of the São Francisco Church, a monumental structure in Horta that sustained damage during the Faial earthquake. The results show that both simulation approaches yield structural responses similar to the observed records.

Conference Paper↗
USGS2025

A spatial analysis of the groundwater emergence flood hazard in Long Island, New York and near coastal areas surrounding Long Island Sound in New York, Connecticut, and Rhode Island

Long Island, New York and near coastal areas surrounding Long Island Sound are densely populated and, like other coastal areas, are susceptible to flooding from several potential sources, including stormwater from precipitation events, tidal flooding and storm surge, and groundwater inundation or groundwater emergence flooding. The latter refers to the intersection of a rising water table with land surface or critical infrastructure. Many studies of flood drivers either neglect or only briefly discuss how shallow groundwater conditions may contribute to or exacerbate flood conditions. As part of a comprehensive study of compound flood hazards in the near coastal areas surrounding Long Island and Long Island Sound, a spatial analysis was completed, in cooperation with the Environmental Protection Agency’s Long Island Sound Study, using available regional datasets to characterize the potential hazard for groundwater emergence flooding. The approximately 3,100 square mile study area was subdivided into 11,407 900-meter by 900-meter (approximately 3,000-feet by 3,000-feet) grid cells, for the purposes of integrating the spatial datasets to calculate and map the groundwater emergence flood hazard. The depth to the water table, hydrologic soil groups, and National Land Cover Database were harmonized to the common grid. A groundwater emergence flood hazard rank was calculated for each grid cell for current average conditions following a set of rules accounting for the depth to the water table and the percent of area within each cell with slow infiltrating soils. A higher sea level position scenario was also calculated for the Long Island part of the study area. The calculated groundwater emergence flood hazard rank was reviewed in concert with the National Land Cover Data Base to identify developed areas and associated infrastructure that may be at risk to groundwater emergence flooding. Study results indicate that the groundwater emergence flood hazard is highest in coastal areas and near surface water where the water table is close to ground surface. Inland areas away from surface water bodies are not likely to be exposed to groundwater emergence flooding. For Long Island, under a scenario with higher sea level position, a greater groundwater emergence flood hazard is calculated in some locations closer to the coast and where land is submerged. Away from the coast and surface-water drainage, the groundwater emergence flood hazard is similar between the current average sea level condition and a higher sea level position scenario.

EarthArXiv↗
USGS2026

Chronic exposure to waterborne nickel significantly reduced growth of juvenile crayfish (Faxonius virilis)

Crayfish are critical functional components of aquatic ecosystems. Previous research has documented adverse effects of mineral extraction on crayfish. Here, we characterize potential risks of mining-derived waterborne nickel (Ni) to crayfish by documenting the effects of dissolved Ni on growth and food consumption of juvenile virile crayfish ( Faxonius virilis) in a 28-day chronic laboratory exposure. Nominal Ni concentrations ranged from 31.25 to 500 micrograms per liter (µg/L; pH = 7.96 ± 0.20, hardness = 150 ± 1 milligrams per liter as calcium carbonate). Crayfish survival, carapace length, and wet weight were measured. After 28 days of exposure, a 24-h feeding trial was performed to determine differences in food consumption. During the growth trial, 99% of crayfish survived. Change in wet weight and final wet weight were the most sensitive endpoints, with 20% effect concentrations of 24.8 and 22.6 µg/L Ni, respectively. Crayfish exposed to an average of 438 µg/L Ni consumed 41% less, and weighed 65.1% less, than control crayfish. These results suggest chronic, sublethal exposure to waterborne Ni may have negative effects on crayfish growth. Reduced growth and consumption rates in crayfish could have wide-ranging consequences throughout aquatic ecosystems since crayfish are consumers, prey, keystone trophic regulators, and ecosystem engineers. Finally, these results could inform bioenergetics and may be coupled with population models to predict potential changes in population sizes of native and invasive crayfishes.

Ecotoxicology↗
USGS2024

Declining groundwater storage expected to amplify mountain streamflow reductions in a warmer world

Groundwater interactions with mountain streams are often simplified in model projections, potentially leading to inaccurate estimates of streamflow response to climate change. Here, using a high-resolution, integrated hydrological model extending 400 m into the subsurface, we find groundwater an important and stable source of historical streamflow in a mountainous watershed of the Colorado River. In a warmer climate, increased forest water use is predicted to reduce groundwater recharge resulting in groundwater storage loss. Losses are expected to be most severe during dry years and cannot recover to historical levels even during simulated wet periods. Groundwater depletion substantially reduces annual streamflow with intermittent conditions predicted when precipitation is low. Expanding results across the region suggests groundwater declines will be highest in the Colorado Headwater and Gunnison basins. Our research highlights the tight coupling of vegetation and groundwater dynamics and that excluding explicit groundwater response to warming may underestimate future reductions in mountain streamflow.

Nature Water↗
USGS2024

Simulated mean monthly groundwater-transported nitrogen loads in watersheds on the north shore of Long Island Sound, 1993–2022

Elevated nitrogen loads are pervasive in the Long Island Sound, an estuary that receives freshwater and nutrients from both surface-water and groundwater discharge. Surface-water nitrogen loads to the Long Island Sound are relatively well characterized, but less is known about groundwater-transported nitrogen loads. Prior work on the northern shore of Long Island Sound (Connecticut and areas of New York and Rhode Island) suggested that groundwater travel times are relatively short (median less than 2 years) and that decade-long nutrient legacies are not widespread. Because the travel times are short, groundwater flow and nutrient loads likely vary substantially between months. In the current study, the U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency’s Long Island Sound Study and the Connecticut Department of Energy and Environmental Protection, developed a set of models to better characterize spatial and temporal patterns of groundwater-transported nitrogen loading from atmospheric deposition, septic systems, and fertilizers within the study area. The models provide an estimate, with uncertainty, of groundwater-transported nitrogen loads in the study area, filling a key gap in the nitrogen budget for Long Island Sound. The models also highlight the spatial and temporal variation in nitrogen loading throughout the study area. The modeling workflow involved four models. (1) A soil-water-balance model was developed by using the Soil-Water-Balance software to simulate groundwater recharge across the study area for water years 2005 through 2022. The simulated mean monthly recharge from the soil-water-balance model was used as input into a groundwater-flow model. (2) The groundwater-flow model was developed by using the MODFLOW 6 software and data for water years 1993 through 2022 and simulates average monthly hydrologic conditions. The groundwater-flow model was calibrated by using the Iterative Ensemble Smoother method within the PEST++ software. The Iterative Ensemble Smoother method generates an ensemble of sets of parameter values, with each set producing reasonable simulated hydrologic parameter values. (3) An ensemble of MODPATH particle-tracking simulations were run to generate particle flow paths and travel times, with each simulation using a different set of the flow model parameters. (4) A nitrogen load model uses the MODPATH simulation outputs to track nitrogen from the land surface through multiple attenuation zones until it discharges into fresh or saline surface water. As with the groundwater-flow model, the nitrogen model simulated average monthly groundwater-transported nitrogen loads for water years 1993 through 2022. One novel aspect of the nitrogen load model is that the nitrogen attenuation parameters were calibrated to observed nitrogen loads. Across the ensemble of simulated nitrogen loads, the median study-area-wide monthly simulated nitrogen loads from the aquifer to Long Island Sound throughout the year ranged from 900 to 18,600 kilograms of nitrogen per day, with a median load of 5,100 kilograms of nitrogen per day. The simulated loads were based on average monthly conditions for water years 1993 through 2022. Loads were highest during the winter and early spring and lowest during the late summer. However, simulated travel times for groundwater and nitrogen loads discharged to Long Island Sound during summer were longer than travel times for groundwater and loads discharged during the winter, indicating that, on average, groundwater discharged during summer traveled along different, and longer, flow paths, than groundwater discharged during winter. This indicates that summer loads would respond more slowly to changes in nitrogen inputs at the water table than winter loads. Over the entire study area, approximately 15 percent of the simulated load is from atmospheric deposition sources, 30 to 40 percent is from fertilizer, and 50 to 60 percent is from septic systems. The final analysis of the study involved simulating the change in groundwater-transported nitrogen load in response to upgrading septic systems or reducing fertilizing inputs to areas of turf grass. Both management interventions reduced the groundwater-transported nitrogen load, and reductions were greater in areas with greater loads from septic systems or turf-grass fertilizers. The delay between management actions and substantial reductions in groundwater-transported nitrogen loads varied seasonally; loads during the late summer months remained elevated longer than the winter loads.

Connecticut, Rhode Island↗
USGS1977

Acid-rain weathering of a metasedimentary rock basin, Herkimer County, New York

A geochemical balance of major chemical constituents of precipitation inflow with those of surface-water outflow was used to evaluate the effect of acid rainfall (average pH = 4.3) on weathering rates of metasedimentary rocks underlying a surface-water basin in New York State. Precipitation samples and surface-water samples show that approximately 45 percent of the net cation outflow is due to weathering by precipitation acidity. The remaining 55 percent of the cation load in the outflow is attributed to interactions between atmosphere, rock, and soil water in the unsaturated zone. Comparison of the acidity of acid precipitation and air-equilibrated distilled water suggests that since preindustrial time, precipitation acidity has probably increased weathering rates for this basin approximately 75 percent. The increased acidity of the precipitation may also increase the rate of dissolution of heavy metals from water-piping systems.

New York↗
USGS2026

Predictable seismic cycles result from structural rupture barriers on oceanic transform faults

Earthquakes of magnitude ( M ) >5.5 on oceanic transform faults (OTFs) repeatedly rupture the same locked patches, sometimes quasiperiodically. These patches are separated by “barriers” that halt earthquake propagation and slip mostly aseismically. However, the physical processes governing this systematic behavior remain unclear. We analyzed two barriers along the Gofar transform fault that have arrested ~15 M 6 earthquakes over the past three decades. Ocean bottom seismometer data indicate that the barriers hosted intense microseismicity before the mainshocks and comprise multistrand faults and transtensional stepovers with 100- to 400-m lateral offset. These characteristics contradict earthquake rupture termination models invoking velocity-strengthening friction or large geometric steps and instead point to damage-enhanced porosity and dilatancy-strengthening mechanisms. By isolating rupture segments, the barriers regulate the quasiperiodic recurrence of OTF earthquakes.

Science↗
USGS2025

To heal or not to heal?: 1. The effect of pore fluid pressure on the frictional healing behavior of lithologies in Oklahoma

The competition between fault healing (i.e., re-strengthening) and fault loading determines the timing and magnitude of fault failure within the seismic cycle. Repeating earthquakes can give observational estimates of fault healing rates, however, it is difficult to link laboratory studies of frictional healing and observed healing rates from repeating earthquakes in part because of uncertainty in lithology at depth. Due to well-constrained and relatively simple geology, earthquakes in Oklahoma can be linked to the granitic basement rock and to the Arbuckle Group, which is primarily composed of dolomite at earthquake depths. Here, we conduct friction experiments to measure healing rates of the two earthquake-bearing lithologies at confining pressures representative of earthquake depths and pore pressures ranging from 0% to 80% of the confining pressure. We measure frictional healing by executing slide-hold-slide tests with hold times ranging from 3 s to 3000 s. The friction experiments on the Troy Granite indicate that pore fluid pressure does not greatly affect healing rate. On the other hand, the dolomite of the Arbuckle Group exhibits decreased healing with increased pore fluid pressure, with weakening at the highest pore pressure. We hypothesize that this is due to an increase in dissolution of dolomite at high pore pressures/low effective normal stress. These healing rates are used in the companion paper to understand the moment-recurrence time behavior of repeating earthquakes in Prague, Oklahoma. This work has implications for possible enhanced dissolution and weakening behavior of the Arbuckle Group during wastewater injection activities.

Oklahoma↗