USGS ScienceSearch

SEARCH · USGS Science

Results for “Resources, Conservation, and Recycling”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,663 records · Page 23Linked to original sources

Groundwater dominates snowmelt runoff and controls streamflow efficiency in the western United States

Climate change in seasonally snow-covered mountain catchments is reducing water supply and decreasing streamflow predictability. Here, we use tritium age dating to show that contrary to the common assumption that snowmelt quickly contributes to runoff, streamflow during snowmelt in western US catchments is dominated by older groundwater. The average age of streamwater during snowmelt runoff (5.7 ± 4.3 years) was intermediate to the average age of groundwater (10.4 ± 4.5 years) and recent precipitation, indicating that 58% (±34%) of snowmelt runoff was derived from groundwater. Water ages, streamflow, and groundwater storage were mediated by bedrock geology: low-permeability hard rock/shale catchments exhibited younger ages, less storage, and more efficient streamflow generation than high-permeability sandstone/clastic catchments. Our results demonstrate that snowmelt runoff is the result of multiple prior years of climate mediated by groundwater storage. Including these interactions will be crucial for predicting water resources as climate and landscape changes accelerate.

western united States

Groundwater spatial variability within an atoll island: Assessing shallow aquifer heterogeneity with geophysical and physicochemical measurements

This study examines the spatial variability of shallow groundwater on Dhigelaabadhoo Island using electromagnetic induction surveys, groundwater monitoring, and sediment analyses. The research reveals how variations in island morphology—such as differences in elevation, reef flat width, and sediment composition—affect the spatial distribution of groundwater lenses and the overall aquifer dynamics. Saltwater intrusion is especially pronounced in low elevated areas, with narrow reef flat plate and areas where higher hydraulic conductivity—driven by the presence of coarser sediments—is observed, whereas regions characterized by finer sediments, higher elevation, and wider reef flat plates tend to support more symmetric and less saline groundwater lenses. The geophysical investigations reveal that tidal oscillations alter groundwater movement by markedly changing water levels and conductivity, thereby underscoring the critical need to account for temporal dynamics in atoll coastal aquifer systems and the importance of integrating tidal dynamics into the aquifer zone. The findings highlight the significant role of intrinsic morphological and external hydrodynamic factors in shaping groundwater distribution on atoll islands, offering critical insights for sustainable freshwater resource management.

Dhigelaabadhoo Island

A three-dimensional geologic framework model of the northern Great Plains region of Montana, North Dakota, South Dakota, and Wyoming, USA

This report presents a new three-dimensional geologic framework model (GFM) of the northern Great Plains region, encompassing parts of Montana, North Dakota, South Dakota, and Wyoming. The model provides a regionally consistent, geographic information system (GIS)-ready representation of Phanerozoic sedimentary strata, major fault systems, and Precambrian basement geometry across two sedimentary basins and adjacent uplifts. More than 300,000 geologic and geophysical data inputs were synthesized to model 41 stratigraphic horizons and 47 faults, yielding an internally coherent, sealed-volume interpretation of the subsurface. The modeling workflow developed for this study demonstrates an efficient and scalable approach for constructing basin-to regional-scale GFMs in geologically complex and data-variable settings. Although model fidelity varies with data density and quality, the resulting geometry is broadly consistent with 1:500,000-scale geologic mapping and highlights areas where additional geologic study is most needed. The three-dimensional GFM provides a foundational framework to support groundwater, energy, and mineral resource assessments, and offers a transferable methodology for potential future U.S. Geological Survey efforts to build large-area subsurface models in underexplored regions of the United States.

Montana, North Dakota, South Dakota, Wyoming

CRESCENT earthquake dynamic rupture, earthquake cycle, and tsunami code verification platform

Physics-based simulations are critical for understanding natural hazards. The increasing complexity of numerical codes requires benchmark exercises to verify that different computational methods yield consistent results when solving the same governing equations. Here, we present an open-access web platform designed for the verification of earthquake dynamic rupture, seismic cycle, and tsunami simulations. The platform architecture utilizes a modular, serverless backend on Amazon Web Services (AWS) to provide scalable file processing and visualization. A lightweight static web application provides a secure interface for uploading and managing results, while the browser-based data visualization enables interactive analysis of time series and surface grid data. By using structured JavaScript Object Notation (JSON) text files to define benchmark structures, the system remains fully extensible, allowing the addition of new scenarios without modifying the underlying software logic. The platform hosts the "The Tsunami Problem Versions" (TTPV) 1 & 2, two benchmarks for 3D fully coupled earthquake dynamic rupture and tsunami generation, and provides a framework for earthquake cycle models. This community resource aims to build trust in numerical simulations and facilitate long-term collaborative code verification as modeling software continues to evolve.

Seismica

Utilizing downhole datasets for modelling the aeromagnetic signature of the Iron Creek Co-Cu deposit in the Idaho Cobalt Belt

The Idaho Cobalt Belt in east-central Idaho is host to some of the largest domestic Co resources, including the informal Iron Creek deposit. The two main ore zones of this deposit, the Iron Creek and the Ruby, are hosted in greenschist-grade interbedded argillite/siltstone and quartz-rich units of the Mesoproterozoic Apple Creek Formation of Lemhi Group. The primary ore mineral is cobalt-bearing pyrite, which occurs with pyrrhotite, chalcopyrite, and magnetite. This study integrates mineralogical and core-scale geophysical measurements with regional-scale aeromagnetic surveys. The high magnetite content within the Ruby zone produces elevated magnetic susceptibility, but the relatively limited spatial footprint of the ore zone would produce a small-scale anomaly that may be overlooked in regional surveys. The low magnetite content in the Iron Creek zone results in low magnetic susceptibility, creating a relatively low amplitude geophysical response. By characterizing the magnetic properties and mineralogy of these ore zones, this study enhances the interpretation of aeromagnetic data, enabling the identification of small or faint anomalies as potential Co targets. These findings improve can improve exploration strategies, both within the Idaho Cobalt Belt as well as for similar deposit types globally.

Idaho

A synthesis engine for constructing geologic maps of the United States

The geologic history of the United States is cataloged in thousands of geologic maps produced during many decades. However, the disparate nature of these individual maps makes it challenging to assess resources, research geologic histories, or characterize natural hazards holistically across the Nation. The U.S. House of Representatives 2020 appropriations bill for the U.S. Department of the Interior (H.R. 116-100) requires the U.S. Geological Survey to “bring together detailed national and continental-resolution [two-dimensional] and [three-dimensional] information produced throughout the Survey and by [F]ederal and [S]tate partners.” In response to this directive, this report presents a compilation and synthesis of geologic maps across the United States in the form of a relational database. The synthesis database includes thematic maps that synthesize the Nation’s geology, and retains the original input maps as well as linkages to standardized vocabularies to aid the discoverability of geologic information. Specifically, the synthesis database is targeted toward producing four National-resolution maps for the conterminous United States: Quaternary geology, the geology at the Earth’s surface, pre-Quaternary geology, and Precambrian geology. In addition, the synthesis database includes the infrastructure necessary to expand to additional resolutions in the future.

conterminous United States

Digitizer Suite: The Albuquerque Seismological Laboratory Digitizer Testing Suite

Laboratory testing of digitizers and seismometers helps ensure that prior to deployment the instrumentation can produce high quality data and is operating within specifications. In this work we detail the software package called: the Albuquerque Seismological Laboratory (ASL) Digitizer Test Suite. This Java software package provides several algorithms to verify various performance parameters of digitizers commonly used for recording analog seismic instruments. The goal of these tests is not to be exhaustive, but to identify common failures that could compromise the integrity of seismic data being recorded on the digitizer. For example, Sandia National Laboratories (e.g., Slad and Merchant, 2018) routinely do comprehensive testing of digitizers for various monitoring missions. While these tests reports are valuable for comprehensively characterizing a recording system, it would be resource intensive to conduct such tests on every seismic recorder used in a network. We focus on tests that include ways to estimate the sensitivity, timing, self-noise, and clip-level of the digitizer, as well as the fidelity of the signal being recorded. The software is publicly available and provides a way for the community to verify the integrity of a digitizer using a minimum amount of outside equipment.

Seismological Research Letters

USGS addresses needs for lithium calibration and quality control materials for pLIBS analysis

Lithium (Li) is a globally important commodity used for energy storage, national defense, human health, and advanced technologies. Lithium resource development requires identifying deposits with elevated concentrations and optimal mineralogy, typically associated with select clays and pegmatites. Lithium is a light, highly reactive alkali metal with low atomic mass that is difficult to detect and quantify using conventional portable geochemical techniques such as X-ray fluorescence (XRF). However, portable laser-induced breakdown spectroscopy (pLIBS) is a powerful analytical technique for lithium exploration due to its ability to analyze solids quickly with minimal preparation. The expanded utility of pLIBS is hampered by the lack of matrix-matched calibration and quality control (QC) materials. The United States Geological Survey (USGS) has developed in-house lithium calibration and QC materials for lithium in clay and pegmatite matrices to address this limitation. We present the workflow and implementation of a custom-built matrix specific calibration on a SciAps Z-300 pLIBS, using proprietary Profile Builder software. The implementation of the custom calibration and quality control standards enables us to collect semiquantitative results directly from the pLIBS while in the field. Ultimately, this calibration has improved confidence in sample selection and collection in the field, providing more efficient site characterization.

Conference Paper

Fingerprinting magmatic REE deposit sources with zircon petrochronology

Carbonatites and associated alkaline silicate rocks are of considerable economic interest due to their enrichments in rare earth elements. The petrogenesis and source(s) of these complexes, however, are poorly understood. Models propose either mantle plume-derived carbon-rich melts or a mantle source enriched by subduction-related metasomatism. We use zircon trace elements to fingerprint carbonatite-alkaline complex sources, focusing on the economically significant 1.4 Ga Mountain Pass intrusive suite (MPIS). Autocrystic zircon from MPIS alkaline silicate rocks are enriched in Th and U relative to Nb suggesting a subduction influenced, oxidized source region. Lower Sc/Yb, higher Ti concentrations, and the absence of Eu anomalies in autocrystic zircon suggest derivation from a less hydrous, hotter, and deeper mantle source relative to arc-related 1.8–1.6 Ga inherited zircon. These data are best explained by syn- to post-collisional Mesoproterozoic reactivation of a subduction-metasomatized mantle source. The source and tectonic setting of the MPIS contrasts with Mesoproterozoic Gifford Creek and Bayan Obo carbonatites which exhibit plume-like compositions and are associated with rifts, suggesting different sources and tectonic settings for these economically significant deposits. We demonstrate that zircon petrochronology is a robust method for distinguishing carbonatite sources and can inform more targeted exploration strategies for critical mineral resources.

Conference Paper

Microbial ecology of permafrost soils: Populations, processes, and perspectives

Permafrost microbial research has flourished in the past decades, due in part to improvements in sampling and molecular techniques, but also the increased focus on the permafrost greenhouse gas feedback to climate change and other ecological processes in high latitude and alpine permafrost soils. Permafrost microorganisms are adapted to these extreme environments and remain active at low temperatures and when resources are limited. They are also an important component of global elemental cycles as they regulate organic matter turnover and greenhouse gas production, particularly as permafrost thaws. Here we review the permafrost microbiology literature coupled with an exploration of its historical aspects, with a particular focus on a new understanding advanced by molecular biology techniques. We further identify knowledge gaps and ways forward to improve our understanding of microbial contributions to ecosystem biogeochemistry of permafrost-affected systems.

Permafrost and Periglacial Processes

Hydrology and water and sediment quality at James Campbell National Wildlife Refuge near Kahuku, Island of Oahu, Hawaii

The James Campbell National Wildlife Refuge occupies two lowland marsh and pond complexes on the northern coastal plain of Oahu: the mostly natural ponds and wetlands of the Punamano Unit and the constructed ponds of the Kii Unit. The U.S. Fish and Wildlife Service manages the Refuge primarily to protect and enhance habitat for four endangered species of Hawaiian waterbirds. Kii Unit is fed by artesian wells and rainfall, whereas Punamano Unit is fed naturally by rainfall, runoff, and ground-water seepage. Streams drain from the uplands into lowland ditches that pass through Kii Unit on their way to the ocean. A high-capacity pump transfers water from the inner ditch terminus at Kii to the ocean outlet channel. Stormwaters also exit the inner ditch system over flood-relief swales near the outlet pump and through a culvert with a one-way valve. A hydrologic investigation was done from November 1996 through February 1998 to identify and quantify principal inflows and outflows of water to and from the Refuge, identify hydraulic factors affecting flooding, document ground-water/surface-water interactions, determine the adequacy of the current freshwater supply, and determine water and sediment quality. These goals were accomplished by installing and operating a network of stream-gaging stations, meteorology stations, and shallow ground-water piezometers, by computing water budgets for the two Refuge units, and by sampling and analyzing water and pond-bottom sediments for major ions, trace metals, and organic compounds. Streamflow during the study was dominated by winter stormflows, followed by a gradual recession of flow into summer 1997, as water that had been stored in alluvial fans drained to lowland ditches. Outflow at the ditch terminus in 1997 was 125 million gallons greater than measured inflow to the coastal plain, mainly reflecting gains from ground water along the ditches between outlying gages and the ditch terminus. Of the measured 1997 outflow, 98 percent was through the Kii outlet pump, with the outlet culvert valve only opening for brief periods during storms. Large volumes of stormflow overflowed the flood-relief swales unmeasured. The largest storm of the study, in November 1996, was estimated to have a flood frequency of about 3 to 4 years. Streamflow exceeded culvert capacity and overtopped Kamehameha Highway at Kalaeokahipa Stream and Hospital ditch. Slight overbank flooding in Kii ditch resulted strictly from high discharge. Minor overbank flooding farther out on the coastal plain probably was caused mainly by the small hydraulic gradients available to convey stormflows along the lowland ditches. Stormwaters flooded Kii ponds and flowed back upstream along Punamano ditch into Punamano marsh, introducing suspended sediment and possibly other contaminants to the Refuge. Two smaller storms in January 1997 resulted in smaller flows and no overbank flooding. The Kii outlet pump ran continuously for 7 days during the November 1996 storm and for 1 to 2 days during the January 1997 storms. During all three storms, the outlet culvert valve opened and the inner ditches overtopped the flood-relief swales, allowing free outflow of water from the inner ditch. Backwater effects hindered drainage during the January 1997 storms at Hospital ditch at Kamehameha Highway, and at Punamano ditch at Nudist Camp Road (where the backflow into Punamano marsh in November 1996 constituted an extreme backwater effect). A probable marine backwater effect was imposed at the ocean outlet ditch during the November 1996 storm through a combination of high spring tides and wave setup from large surf. Whether this backwater effect propagated upstream in the ditches to affect inland sites could not be determined conclusively. A sand plug may have built up in the ocean outlet channel before the November 1996 storm, but if so, it probably washed out prior to, or early in the storm, and was not present at the time of peak stage at inland sites. A season-long buildup of the sand plug in late 1997 was inferred from rising water levels in the outlet ditch. Seawater flows up the outlet channel or over the sand berm and into the outer ditch system on most high tides, and particularly during spring high tides. Ponds and ditches of the Refuge and surrounding lowlands have mud- and clay-lined bottoms that form an effective confining unit and inhibit interaction with an underlying shallow limestone aquifer. At Kii Unit, pond levels are higher than adjacent ditch levels and underlying ground-water levels, establishing lateral and downward head gradients that could foster seepage losses from the ponds. Regional ground-water discharge from the Koolau aquifer to the coastal-plain sediments is mostly diffuse, but is concentrated where ridges of Koolau Basalt plunge beneath coastal-plain sediments near Punamano Unit and at the head of Hospital ditch. Kii ditch gains brackish ground water downstream of Kamehameha Highway. Wastewater disposal from the sewage treatment plant adjoining Kii Unit poses little or no threat to Refuge habitat. Disposal is at six injection wells located 0.45 mi away at Kahuku, and the wells inject into confined limestone aquifers that do not extend to Kii Unit. The natural freshwater supply to Punamano Unit is adequate for maintaining the wildlife habitat, judging from stable pond levels and low salinities there. A monthly water budget for Punamano showed an apparent annual deficit in measurable flows in 1997, requiring unmeasured ground-water gains equalling 51 inches of water. The freshwater supply to Kii Unit is inadequate according to Refuge managers, because there is not enough water to manipulate levels adequately in the ponds during most of the year, and particularly during the driest months. This is confirmed by monthly deficits in the water budget for the Kii ponds during summer months. However, the Kii budget showed an annual surplus in measurable flows for 1997 equalling 24 inches of water. Unmeasured losses are required to explain the apparent annual surplus, such as discharge to the ditches through pond water-control structures and downward and/or lateral ground-water seepage. The apparent surplus at Kii is strictly hydrologic and is not a surplus in a management sense; it cannot be stored or used to supply the Refuge, but instead reflects losses from the system that render this amount of water unavailable for use. The budget year, 1997, was drier than normal (24 percent below long-term mean rainfall) and so the measured potential evaporation for 1997 was probably higher than the long-term mean. Few metals or organic compounds of potential concern were detected in pond and ditch waters and in pond-bottom sediments. Detected pesticides were at trace levels or just above minimum reporting limits. Exceptions that exceeded quality guidelines for freshwater sediment were copper and zinc in sediment from Kii ponds C and D, and copper in sediment from Punamano north pond. Therefore, urban and agricultural runoff probably have contributed little in the way of harmful metals or organic compounds to the Refuge, although the potential for such contribution remains from periodic flooding of the ponds by ditch stormflows. Salinity was low throughout most Refuge waters, qualifying as fresh to slightly brackish and suitable for the environmental needs of Refuge fauna. Higher salinities have been observed in ditches during past periods of sugarcane cultivation and saltwater aquaculture, however. Resumption of saltwater aquaculture could raise ditch salinities if saltwater effluents are disposed directly into the ditches, as they were in the past.

Hawaii

The geology of Canadian potash: A critical mineral for feeding the world

Potash, potassium-bearing water-soluble salt, is the primary global economic source of potassium. Potash is recognized as a critical mineral in Canada as it is the largest source of potassium used in fertilizers. It is essential for global agricultural productivity and food security. Canada is the world’s largest potash exporter with vast deposits in the widely mined Prairie Evaporite of Saskatchewan, which formed in the epicontinental Elk Point Basin during the Middle Devonian. Potash is also found in the Windsor Group of Atlantic Canada where it formed in a series of tectonically active basins during the Mississippian that have undergone substantial post-depositional subsurface alteration and deformation. Potash deposits were mined in New Brunswick up until 2016. Both deposits are salt giants, recording times in the geologic record of extensive and long-lasting evaporite genesis under arid conditions in restricted seas. This paper reviews the geological and economic significance of Canadian potash, including (1) the genesis of each deposit, (2) diagenetic, erosional, and tectonic modification, and (3) exploration and mining in each basin. Underdeveloped regions, possible undiscovered resources, environmental considerations, and the importance of sustainable practices in light of climate change and socioeconomic risks are also addressed.

Facets

Subsurface water ice mapping on Mars: A probabilistic approach

Subsurface water ice deposits on Mars are an important resource for potential future human exploration. They are also an indicator of the planet’s past climate. However, the distribution of subsurface water ice in Mars’s midlatitudes is uncertain because spacecraft imagery cannot directly observe subsurface ice in most cases. Various spacecraft remote sensing instruments are sensitive to subsurface water ice, including thermal imaging spectrometers, radar sounders, and neutron spectrometers. Geomorphic analyses of images can also implicate subsurface ice. Building upon the data products from the Mars Subsurface Water Ice Mapping project, we provide a probabilistic framework to jointly interpret existing data and estimate the likelihood of subsurface water ice in the Martian midlatitudes between 60 ∘ S and 60 ∘ N with uncertainty. Broadly, we find that near-surface ice is likely present poleward of ∼45 ∘ in both the northern and southern hemispheres. However, closer to the equator, existing remote sensing data cannot uniquely constrain the presence of subsurface water ice. Our probabilistic results provide a framework for quantifying the abundance of ice on Mars, and our uncertainty estimates allow future analysis and exploration to target regions of high uncertainty.

Planetary Science Journal

Spectral characteristics and mapping of lithium-rich playas in the Basin and Range Province, western United States

This report presents a comprehensive set of prospectivity maps for lithium in brines located within the playas of the Basin and Range Province of western United States. The prospectivity assessment is based on criteria established in the descriptive deposit model outlined in a previous U.S. Geological Survey report, with a focus on regional remote sensing methodologies. The playas within the study area have been systematically ranked according to several key factors, including size, the presence and abundance of source rocks, vegetation as an indicator of water availability, documented prospects, and data products derived from the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) sensor. Notably, the deposits in the playa of Clayton Valley make it stand out as the sole lithium brine-producing playa in the United States. The ASTER sensor provides optimal regional coverage, characterized by a 60-kilometer swath width and unique multispectral capabilities that are not available with other remote sensing instruments. This report and the accompanying maps are intended to serve as resources for further multidisciplinary assessments of lithium or other elements or commodities where prospectivity can be inferred from the presence of proxies such as alteration minerals.

Arizona, Baja California, California, Chihuahua, I

Simulation of groundwater flow in the Silurian aquifer, eastern Iowa, 2020–45

The Silurian aquifer is an important water source for municipalities, industry, and rural households and communities in eastern Iowa, including Johnson County. Increasing demand for groundwater from the aquifer indicated that analytical tools may be beneficial to quantify groundwater resources and inform water-management decisions for the aquifer. The U.S. Geological Survey, in cooperation with the Johnson County Board of Supervisors, developed conceptual and numerical groundwater models to simulate water levels in the Silurian aquifer, determine groundwater budgets, and forecast changes in groundwater levels through 2045. A MODFLOW numerical model was constructed to match water levels for 2020 through 2022. Model performance was assessed by comparing simulated and observed water-level hydrographs at several pumping and monitoring wells. Hydrograph comparison indicates that the model simulates water levels accurately at monitoring wells that are not near areas of pumping and generally overpredicts water levels near pumping wells, while accurately simulating the drawdown trend over time at pumping wells. This transient model framework was then used to predict water levels through 2045 in a scenario of moderate drought and increased groundwater withdrawals. Results from the predictive model indicate as much as 13 meters of additional drawdown in 2045 from 2020 water levels in the area of pumping wells.

Iowa

Combining scanning electron microscopy, X-ray diffraction, and X-ray fluorescence to characterize shear zones at the Pogo gold deposit, Alaska

This study employs a multi-method analytical approach to characterize the mineralogical, geochemical, and textural properties of fault rocks from the Pogo gold mine in the Yukon-Tanana Upland, central Alaska. Specifically, we examine cataclasites, to document the structural and geochemical evolution of shear zones and their associations with gold mineralization. To investigate the shear zone, we integrate portable X-ray fluorescence (pXRF), scanning electron microscopy-based automated mineralogy (SEM-AM), X-ray diffraction (XRD), and high-resolution micro-X-ray fluorescence (micro-XRF) mapping. These methods collectively provide insights into bulk and trace element chemistry, mineralogical composition, and deformation-related textures across multiple scales. Handheld pXRF enables rapid geochemical screening, guiding SEM-AM and XRD analyses to ensure consistent mineralogical interpretation. X-ray diffraction identifies and quantifies crystalline phases, while SEM-AM produces high-resolution mineral maps, revealing mineral abundances, grain-scale textures, and gold associations. Micro-XRF mapping further refines our understanding by showing visual trace element distributions at sub-millimetre resolution. By integrating these techniques, we improve our understanding of the nature and geochemistry of Pogo shear zones, their role in gold mineralization, and support metallurgical processing strategies. This approach enhances exploration models and resource characterization for structurally complex gold deposits.

Alaska

Production of mineral commodities and geospatial map of the mineral industries and related infrastructure of China

As part of the U.S. Geological Survey’s (USGS) mission to distribute global mineral information and analyze supply chains, this study provides a comprehensive review of the global significance of China’s mineral production and capacity in 2023. Of 77 mineral commodities in the USGS dataset, China produced 74 and was the world’s first-ranked producer for 39 of the 74. Compared to the high share of global mineral production, including up to 98 percent of global gallium production, the country’s share of global mineral reserves was relatively small, ranging from 20 percent (zinc ore) to 52 percent (tungsten ore). China’s imports of metal ores, slag, and ash accounted for 64 percent of global imports of such commodities by value. The country’s exports of base metals and articles of base metal accounted for 17 percent of the global exports. To help nongeographic information system users assess the spatial distribution of mineral mines, processing facilities, and ports for trades in China, this study created a geospatial (also called “georeferenced”) portable document format (GeoPDF) map. In addition, the GeoPDF contains mineral resource tracts (such as antimony, copper, potash, coal, and oil and gas), exploration sites, and energy infrastructure based on the preexisting USGS data.

Open-File Report

Using visualization science to inform the design of environmental decision-support tools—A case study of the U.S. Geological Survey Waterwatch

Environmental decision-support tools are increasingly being used to serve both expert and non-expert audiences. Many existing tools are primarily expert-focused, and redesigning them can be challenging because experts and non-experts interact with tools differently, existing users may be resistant to changes, and there is little guidance on how to prioritize redesign efforts and demonstrate their efficacy. In this report, we present a case study of a user-centered redesign of an established environmental decision-support tool—the U.S. Geological Survey WaterWatch. WaterWatch supports flood, drought, and other water resource management decisions through the display of water levels at gages across the United States. Using a participatory process, we identified a functional change (replacing the existing rainbow colormap), created an alternative design, and tested the alternative’s usability through two general public surveys. The results showed that replacing the rainbow colormap with a more intuitive diverging colormap improves usability, regardless of the audience’s subjective preference for the rainbow color scheme. In addition, we demonstrated the importance of using legends to improve the audience’s understanding of the map symbols. This study demonstrates how user-centered design approaches can be used to inform the design of high-profile products and tools.

Scientific Investigations Report