USGS ScienceSearch

SEARCH · USGS Science

Results for “Nature Communications”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

414 records · Page 23Linked to original sources

Nonpoint-source pollutant discharges of the three major tributaries to Reelfoot Lake, west Tennessee, October 1987-September 1989

An investigation of the concentration and loads of nitrogen, phosphorus, and suspended sediment in storm runoff to Reelfoot Lake, in western Tennessee, was conducted from October 1987 through September 1989. Concentrations of selected herbicides also were defined. Reelfoot Lake, with a surface area of about 15,500 acres, is the largest natural lake in Tennessee and an important recreation and fisheries resource. Previous studies showed that the lake is hypereutrophic, a condition caused by high concentrations of nutrients in water and sediments discharged from the three principal tributaries (South Reelfoot Creek, North Reelfoot Creek, and Running Slough) to the lake. Pesticides, including herbicides, have been detected in the lake's bottom sediments. Storm runoff contributed about 87percent of the total water discharge of the three main tributaries to Reelfoot Lake. South Reelfoot Creek contributed about 4.7 tons per acre per year of suspended sediment, while North Reelfoot Creek contributed about 1.9 tons per acre per year. Running Slough contributed only about 0.31 ton per acre per year of suspended sediment. Most of the suspended sediment was transported by storm runoff between October and March. About 80 percent of the annual streamflow of the three tributaries occurs during these months. The North Reelfoot Creek basin contributed 8.2 pounds per acre per year of total nitrogen and 2.4 pounds per acre per year of total phosphorus. South Reelfoot Creek basin contributed about 6.5 and 1.3 pounds per acre per year of total nitrogen and phosphorus, respectively, while Running Slough basin contributions were 3.4 and 0.86 pounds per acre per year, respectively. The differences in nutrient yields appear to result from more row-crop agriculture and the relatively steeply sloping agricultural land in the North Reelfoot Creek basin. Ninety-one percent of the total nitrogen load and 95 percent of the total phosphorus load in the three streams was transported by storm runoff. Significant differences in the mean concentrations of nutrients in runoff were defined between the active agricultural months (April through September) and the inactive months (October through March). Storm-runoff samples were analyzed for II selected triazine herbicides. Alachlor and atrazine were the most commonly detected herbicides. Thirty-two percent of the samples contained detectable levels of alachlor and 93 percent of the samples contained detectable levels of atrazine. Ninety percent of the samples collected during the active agricultural months contained detectable leveki of alachlor and all 29 samples contained detectable levels of atrazine. Sixteen samples exceeded lifetime health-advisory levels for atrazine in drinking water (3 micrograms per liter); two samples collected from the April IS, 1988, storm at North Reelfoot Creek and South Reelfoot Creek contained 42 and 57 micrograms per liter of atrazine, respectively. Concentrations of the other nine triazine herbicides were generally less than the level of detection (0.1 microgram per liter).

Tennessee

Methodology and technical input for the 2025 U.S. List of Critical Minerals—Assessing the potential effects of mineral commodity supply chain disruptions on the U.S. economy

The Secretary of the Interior, acting through the Director of the U.S. Geological Survey, is tasked by section 7002 (“Mineral Security”) of title VII (“Critical Minerals”) of the Energy Act of 2020 (Public Law 116–260, December 27, 2020, 116th Congress) with reviewing and revising the methodology used to evaluate mineral commodity supply risk and the U.S. List of Critical Minerals (LCM) no less than every 3 years. Following two previous LCM assessments, this analysis represents the latest technical input for evaluating each mineral commodity’s supply risk and determining their recommended status on the LCM. We evaluated mineral commodity supply risk using two criteria: (1) an economic effects assessment that quantified the potential effects of various trade disruption scenarios on the U.S. economy, and (2) an examination of whether the mineral commodity’s U.S. supply chain relied on a sole domestic producer that represented a single point of failure. For the first criterion, postdisruption equilibrium quantities and prices for each mineral commodity were calculated based on their price elasticities of supply and demand and the availability of excess production capacity for each yearlong foreign trade disruption scenario. Subsequently, a nonlinear optimization routine was used with detailed economic input-output tables to estimate the potential economic effects on the U.S. economy of over 1,200 scenarios for 84 mineral commodities. After accounting for the probability of each scenario’s occurrence, the overall results are presented in terms of changes in U.S. gross domestic product (GDP) by individual industry and the economy overall. The results, which ranged from a net decrease in U.S. GDP of nearly $4.5 billion to a net increase of $33 million, largely reflect U.S. import dependency and world production concentration. Using the Jenks natural breaks optimization method, a statistical classification technique, we categorized the mineral commodities into several classes based on this overall risk quantification. Mineral commodities with annualized probability-weighted net decreases in U.S. GDP greater than $2 million were recommended for inclusion on the LCM. If a mineral commodity did not meet the threshold for inclusion on the LCM under the first criterion, its domestic supply chain was examined under the second criterion, which recommended a mineral commodity for inclusion on the LCM if there was only a single domestic producer. Ultimately, the two criteria resulted in the recommendation of the addition of six mineral commodities (in descending risk order, potash, silicon, copper, silver, rhenium, and lead) to and the removal of two mineral commodities (arsenic and tellurium) from the LCM. By using an economic effects assessment, the results of this analysis provide a prioritization that can also be compared directly against other risk analyses and the cost of various risk mitigation strategies.

Open-File Report

Guidelines for producing integrated 210Pb and 14C age-models

Accurate reconstructions of past environmental changes are crucial in paleoecological research and require reliable chronologies of sedimentary archives. Establishing robust age-models and obtaining the most appropriate proxies for analysis is a complex scientific endeavor, requiring extensive resources and collaboration among specialists, including radiochronologists. Radiometric dating methods, such as 210 Pb and radiocarbon ( 14 C), are frequently employed to establish chronologies in aquatic sedimentary deposits and peat bogs. In this study, we review key aspects of sampling, analysis, and the principles underlying 210 Pb and 14 C age-models, focusing on methods for developing robust joint chronologies for paleoenvironmental research. Drawing largely from the authors' experiences and group discussions during and after a scientific workshop in 2022, we discuss important considerations for site selection, sampling strategies, and radiometric dating to construct integrated 210 Pb and 14 C age-models. Using expert consensus, this group – called Paleostats – aims to provide a set of best practices for other geochronologists with this methods paper. Among our conclusions, we emphasize the importance of accounting for site-specific factors such as prior information on sedimentation rates to establish appropriate sampling and analytical strategies. The use of appropriate coring devices can minimize disturbance to sediments and ensure the core surface remains intact and preserved until sectioning. Where excess 210 Pb is expected, sectioning at intervals of ≤1 cm provides an adequate sampling resolution for 210 Pb dating. Exceptions are possible, allowing for ~2–3 cm sections in areas with confirmed high sedimentation rates (e.g., > 1 cm yr −1 ). Recovering deeper core sections for 14 C dating with sufficient overlap allows for accounting errors in depth estimates made in the field. Special attention is advised during time intervals where validation proxies, such as the human-made radionuclides 137 Cs or post-bomb 14 C, are expected, and to determine the depth of secular equilibrium between 210 Pb and 226 Ra. Radiocarbon analyses are commonly performed by accelerator mass spectrometry, and age models are constructed mainly using Bayesian statistics with Markov Chain Monte Carlo techniques (e.g., Bacon ). A Bayesian approach ( Plum ) is now available for producing 210 Pb age-models, which infers the 210 Pb ex flux, eliminates the need for selecting an equilibrium depth, and allows dating cores with incomplete 210 Pb ex inventory. Plum offers improved chronologies by integrating raw 210 Pb and 14 C data, and these age-models can be enriched with other dating methodologies, such as identifying tephras and other well-recorded historical events. Harmonized reporting would contribute to making radiometric age-models reproducible, which would benefit from an international effort. Using 210 Pb and 14 C to produce integrated age-models may yield better insights into the interplay between natural and recent anthropogenic forcings on ecosystems. This can enhance our understanding of environmental processes and their impacts on climate change, ultimately supporting science-based assessments and decisions.

Earth-Science Reviews

Three-dimensional temperature maps of the Williston Basin, USA: Implications for deep hot sedimentary and enhanced geothermal resources

As part of U.S. Geological Survey's (USGS) efforts to identify and assess geothermal energy resources of the US, a three-dimensional (3D) geologic and thermal model has been constructed for the Williston Basin, USA. The geologic model consists of all sedimentary units above the Proterozoic and Archean crystalline rock (called basement herein), with a total sedimentary thickness of up to 5 km near the basin center. Twenty-nine geologic units were mapped from interpreted formation tops from 16,465 wells. A 3D temperature model was constructed to a depth of 7 km by constructing a 3D heat flow model for the sedimentary units, followed by estimating underlying temperature using a one-dimensional (1D) analytic solution for heat flow within the underlying crystalline basement. Using the sedimentary basin model, heat flow was simulated in 3D and was calibrated using three temperature datasets: 1) 24 high-confidence static temperature logs (equilibrium thermal profiles), 2) more than15,000 drill stem test (DST) measurements from >7,000 wells, and 3) more than 45,000 bottomhole temperature (BHT) measurements from >14,000 wells. The DST and BHT datasets provide broad spatial coverage, but are lower confidence, primarily because measurements were made prior to attaining thermal equilibrium. DST and BHT measurements were binned regionally to develop representative thermal profiles that generally agree with these lower quality data (hereafter called pseudowell temperature profiles). Layer properties (primarily thermal conductivity and compaction curves) were set to best estimate values, then the heat flow model was calibrated to fit pseudowell and static temperature logs primarily by adjusting basal heat flow to approximate the overall temperature profile. Minor adjustments to thermal conductivity allowed adjusting changes in slope at lithologic contacts. Resulting maps include 3D temperature and basal (bottom of sedimentary units) heat flow estimates, which are used as input for the temperature model of the basement. The crystalline basement temperature model uses an analytic 1D solution to the heat flow equation that requires estimates of heat flow and temperature at the upper boundary (i.e., the sediment/basement contact), radiogenic heat production within the crystalline basement, and reference thermal conductivity (i.e., uncorrected for temperature). Two regions of high heat flow are identified: 1) in western North Dakota along the North American Central Plains Conductivity Anomaly and 2) in eastern Montana near the Poplar dome. Within the sedimentary column in the center of the basin of the basin, an area of approximately 100,000 km2 is predicted to have moderate- to high-temperature geothermal resources (>90 °C) under the thickest sequences of sediments. Where thick insulation and high heat flow coincide, electric-grade resources can be less than 4 km deep. Assuming a maximum feasible drilling depth of 7 km, temperatures are predicted to be as high as 175 °C. The geologic model may be used to identify strata at sufficient temperatures that may have natural permeability or that may have conditions that favor development of enhanced/engineered geothermal systems resources.

Montana, North Dakota, South Dakota

Ground-water flow in the surficial aquifer system and potential movement of contaminants from selected waste-disposal sites at Naval Station Mayport, Florida

Ground-water flow through the surficial aquifer system at Naval Station Mayport near Jacksonville, Florida, was simulated with a two-layer finite-difference model as part of an investigation conducted by the U.S. Geological Survey. The model was calibrated to 229 water-level measurements from 181 wells during three synoptic surveys (July 17, 1995; July 31, 1996; and October 24, 1996). A quantifiable understanding of ground-water flow through the surficial aquifer was needed to evaluate remedial-action alternatives under consideration by the Naval Station Mayport to control the possible movement of contaminants from sites on the station. Multi-well aquifer tests, single-well tests, and slug tests were conducted to estimate the hydraulic properties of the surficial aquifer system, which was divided into three geohydrologic units�an S-zone and an I-zone separated by a marsh-muck confining unit. The recharge rate was estimated to range from 4 to 15 inches per year (95 percent confidence limits), based on a chloride-ratio method. Most of the simulations following model calibration were based on a recharge rate of 8 inches per year to unirrigated pervious areas. The advective displacement of saline pore water during the last 200 years was simulated using a particle-tracking routine, MODPATH, applied to calibrated steady-state and transient models of the Mayport peninsula. The surficial aquifer system at Naval Station Mayport has been modified greatly by natural and anthropogenic forces so that the freshwater flow system is expanding and saltwater is being flushed from the system. A new MODFLOW package (VAR1) was written to simulate the temporal variation of hydraulic properties caused by construction activities at Naval Station Mayport. The transiently simulated saltwater distribution after 200 years of displacement described the chloride distribution in the I-zone (determined from measurements made during 1993 and 1996) better than the steady-state simulation. The advective movement of contaminants from selected sites within the solid waste management units to discharge points was simulated using MODPATH. Most of the particles were discharged to the nearest surface-water feature after traveling less than 1,000 feet in the ground-water system. Most areas within 1,000 feet of a surface-water feature or storm sewer had traveltimes of less than 50 years, based on an effective porosity of 40 percent. Contributing areas, traveltimes, and pathlines were identified for 224 wells at Naval Station Mayport under steady-state and transient conditions by back-tracking a particle from the midpoint of the wetted screen of each well. Traveltimes to contributing areas that ranged between 15 and 50 years, estimated by the steady-state model, differed most from the transient traveltime estimates. Estimates of traveltimes and pathlines based on steady-state model results typically were 10 to 20 years more and about twice as long as corresponding estimates from the transient model. The models differed because the steady-state model simulated 1996 conditions when Naval Station Mayport had more impervious surfaces than at any earlier time. The expansion of the impervious surfaces increased the average distance between contributing areas and observation wells.

Florida

Cancer risk and estimated lithium exposure in drinking groundwater in the US

Importance Lithium is a naturally occurring element in drinking water and is commonly used as a mood-stabilizing medication. Although clinical studies have reported associations between receiving lithium treatment and reduced cancer risk among patients with bipolar disorder, to our knowledge, the association between environmental lithium exposure and cancer risk has never been studied in the general population. Objectives To evaluate the association between exposure to lithium in drinking groundwater and cancer risk in the general population. Design, Setting, and Participants This cohort study included participants with electronic health record and residential address information but without cancer history at baseline from the All of Us Research Program between May 31, 2017, and June 30, 2022. Participants were followed up until February 15, 2023. Statistical analysis was performed from September 2023 through October 2024. Exposure Lithium concentration in groundwater, based on kriging interpolation of publicly available US Geological Survey data on lithium concentration for 4700 wells across the contiguous US between May 12, 1999, and November 6, 2018. Main Outcome and Measures The main outcome was cancer diagnosis or condition, obtained from electronic health records. Stratified Cox proportional hazards regression models were used to estimate the hazard ratios (HRs) and 95% CIs for risk of cancer overall and individual cancer types for increasing quintiles of the estimated lithium exposure in drinking groundwater, adjusting for socioeconomic, behavioral, and neighborhood-level variables. The analysis was further conducted in the western and eastern halves of the US and restricted to long-term residents living at their current address for at least 3 years. Results A total of 252 178 participants were included (median age, 52 years [IQR, 36-64 years]; 60.1% female). The median follow-up time was 3.6 years (IQR, 3.0-4.3 years), and 7573 incident cancer cases were identified. Higher estimated lithium exposure was consistently associated with reduced cancer risk. Compared with the first (lowest) quintile of lithium exposure, the HR for all cancers was 0.49 (95% CI, 0.31-0.78) for the fourth quintile and 0.29 (95% CI, 0.15-0.55) for the fifth quintile. These associations were found for all cancer types investigated in both females and males, among long-term residents, and in both western and eastern states. For example, for the fifth vs first quintile of lithium exposure for all cancers, the HR was 0.17 (95% CI, 0.07-0.42) in females and 0.13 (95% CI, 0.04-0.38) in males; for long-term residents, the HR was 0.32 (95% CI, 0.15-0.66) in females and 0.24 (95% CI, 0.11-0.52) in males; and the HR was 0.01 (95% CI, 0.00-0.09) in western states and 0.34 (95% CI, 0.21-0.57) in eastern states. Conclusions and Relevance In this cohort study of 252 178 participants, estimated lithium exposure in drinking groundwater was associated with reduced cancer risk. Given the sparse evidence and unknown mechanisms of this association, follow-up investigation is warranted.

contiguous United States

Lunar analog study using portable gamma-ray neutron detector: Radiochemical mapping of silicic-to-basaltic volcanic terrains in the San Francisco Volcanic Field, Arizona

Studying lunar silicic volcanism provides key insights into the Moon’s crustal evolution, magmatic processes, and volcanic history. The Lunar-VISE (Lunar Vulkan Imaging and Spectroscopy Explorer) mission will investigate the Gruithuisen domes, a unique lunar region hypothesized to have formed through silicic volcanism. Using instruments on a Firefly Aerospace lander and a Honeybee Robotics rover, Lunar-VISE will analyze mineralogy, geochemistry, and surface properties to determine the origin and evolution of the domes, with a gamma-ray and neutron spectrometer (LV-GRNS) among its payload instruments. In preparation for this mission, we conducted preliminary fieldwork using a handheld gamma-ray neutron detector with NaI(Tl) and Cs LiYCl :Ce (CLYC) scintillators. This study focuses on various rhyolitic and basaltic volcanic centers in the San Francisco Volcanic Field (SFVF) near Flagstaff, Arizona—specifically Sugarloaf Peak, Bonito Lava Flow, and Robinson Mountain, a region containing several well-characterized lunar analog sites. The SFVF was selected for this study due to its broad compositional diversity spanning basaltic to rhyolitic compositions, its well-preserved volcanic morphologies, and its extensive use in previous NASA field campaigns and astronaut training exercises, making it an ideal terrestrial laboratory for testing planetary exploration techniques. We measured natural radioactivity, specifically from potassium (K), thorium (Th), and uranium (U) and other elements in their decay chains, which serve as diagnostic tracers of magmatic differentiation and crustal evolution processes, to assess geochemical variability across compositionally diverse terrains. The detector’s sensitivity was assessed across varying concentration levels. Regionally averaged concentrations of radioisotopes were determined by gamma-ray spectroscopy at selected sites. Our measurements reveal significant compositional variations between sites, with Sugarloaf Peak (rhyolitic, silicic dome) exhibiting the highest average radioisotope concentrations (K: 3.29 ± 0.24 wt%, U: 14.35 ± 1.81 ppm, Th: 27.14 ± 2.43 ppm), while Bonito Lava Flow (K: 1.13 ± 0.08 wt%, U: 3.86 ± 0.52 ppm, Th: 7.52 ± 1.02 ppm), and Robinson Mountain (K: 1.46 ± 0.16 wt%, U: 5.59 ± 1.06 ppm, Th: 11.75 ± 1.98 ppm) show lower concentrations aligned with basaltic compositions. Gamma-ray fluxes were elevated by a factor of approximately three to four at Sugarloaf Peak relative to nearby basaltic terrains, consistent with expected geochemical differentiation patterns. Furthermore, at meter scales, proximity to geological features significantly affects measurements. Th concentrations adjacent to a cliff face at Sugarloaf’s base were 28% higher than values measured 3-5 meters away from the same feature, demonstrating localized compositional heterogeneity. Analysis of station-by-station measurements reveals that K, U, and Th concentrations show an elevation trend at Robinson Mountain and generally higher concentrations near Sugarloaf Peak’s summit, suggesting progressive magmatic differentiation and/or the presence of more evolved lithologies at higher elevations. By mapping these elements on Earth using GRNS, we aim to optimize measurement techniques for Lunar-VISE and similar rover-borne missions by demonstrating the applicability of portable GRNS instruments for planetary surface exploration in an analog environment.

Arizona

Shallow hydrogeologic framework of the Tully Valley mudboil area, Onondaga County, New York

Mudboils have been documented in the Tully Valley in southern Onondaga County, New York, since the late 1890s. Sediment-laden water from the mudboils flows into Onondaga Creek, which empties into Onondaga Lake at Syracuse 15 miles to the north. Turbidity from the mudboils has degraded the water quality of Onondaga Creek despite a series of mitigation efforts that began in the early 1990s. Turbidity mitigation actions presently (2025) being considered include creek relocation and offline sediment settling. In support of these proposed actions during 2021–23, the U.S. Geological Survey, in cooperation with the New York State Department of Environmental Conservation, U.S. Environmental Protection Agency, Onondaga Nation, Onondaga Environmental Institute, and Central New York Regional Planning and Development Board, collected and analyzed geologic, hydrologic, geophysical, and geotechnical data to characterize the shallow hydrogeology along four proposed creek-relocation paths and in the proposed offline settling basin area. The investigation indicated that the four proposed creek-relocation paths, two east of Onondaga Creek and two west of Onondaga Creek, are underlain by sediments including muck, alluvium, mudboil deposits, alluvial-fan sand and gravel, and lacustrine fines. The proposed excavations would penetrate partially to fully saturated conditions: generally, the water table is shallow near the creek and deep on the alluvial fans. The shallowest excavation, about 5 feet below land surface, would be near the creek and primarily in alluvium, and the deepest excavation, as much as 30 feet below land surface, would be in the alluvial-fan deposits. Brackish waters would be penetrated by proposed channel excavations on the eastern side of Onondaga Creek in an area downgradient from a potentially leaking historical salt-exploration borehole and near the main mudboil area. Excavation in these areas likely would provide a continuous source of brackish groundwater to the relocated creek. Proposed channel excavations of muck, soft to very soft lacustrine fines, and mudboil-type sediments in mudboil and suspected mudboil areas would pose an excavation and slope stability challenge and would have the greatest potential to create new mudboils. Proposed channel excavations below the water table on the Rattlesnake Gulf and Rainbow Creek alluvial fans would intercept groundwater and make the constructed streambank susceptible to seepage-induced slope instability. The substantial water-level fluctuation in the sediments of both alluvial fans would aggravate the stability condition. In addition, excavation on the Rattlesnake Gulf alluvial fan would have the potential to affect water-supply springs at the toe of the fan. The proposed offline settling basin area is in the northern part of the Rattlesnake Gulf alluvial fan. Natural and man-made diversions of Rattlesnake Gulf have resulted in saturated conditions in the general area of the proposed basin. The proposed offline settling basin would be excavated in, and berms would be constructed on, alluvial-fan deposits and lacustrine fines. In the proposed basin area, the alluvial deposits overlying the lacustrine fines are less than 10 feet thick. Excavation, berm construction, and loading of the saturated, soft to very soft lacustrine fines may be problematic and require soil strengthening.

New York

Refining the earthquake history of south-central Alaska through lake records

The Alaska–Aleutian subduction zone (AASZ) is one of the world's most seismically active plate boundaries and the source of the 1964 M w 9.2 Great Alaska earthquake–the second largest instrumentally recorded earthquake in the world. Understanding the nature and frequency of such earthquakes is necessary for seismic and tsunami hazard assessment, but instrumental and historical records that span less than 150 years are too short to allow a statistically reliable analysis of earthquake recurrence times. This calls for studies of evidence of past earthquakes, extending the earthquake catalog further back in time. Subduction-zone paleoseismology in south-central Alaska is predominantly based on coastal evidence of land-level changes and tsunamis generated by megathrust earthquakes and preserved in the geological record. A complementary approach is lacustrine paleoseismology, which is still a relatively young discipline in Alaska. However, globally, lake basins are well-established high-resolution and continuous recorders of paleoseismic activity along subduction zones, relying on the identification of underwater landslide deposits and turbidites generated by seismic shaking. As a result, lake basins not only register ground shaking from megathrust earthquakes, but also from intraslab and crustal earthquakes, which are typically not accompanied by significant land-level changes. In this review paper, we combine coastal and lacustrine paleoseismology approaches to refine the south-central Alaskan earthquake history by comparing the paleoseismic records from two lakes (i.e., Eklutna Lake, located in the Chugach Mountain Range, and Skilak Lake, situated on the Kenai Peninsula) with the coastal and crustal earthquake catalog in Alaska. The resulting age ranges of all known megathrust earthquakes involving the Alaskan megathrust between the Kodiak and Prince William Sound (PWS) sections are more precise and accurate for the last 1.3 kyrs BP than the previously published age ranges from coastal records. As a result, this study supports the following key conclusions: (1) The 1964 CE earthquake was an exceptionally strong and unique event in the last 2000 years, rupturing the PWS, Kenai, Barren Islands, and Kodiak sections simultaneously. (2) The high-resolution and seasonal markings of the varved lake records now disentangle for the first time closely timed earthquakes, which was not possible based on the coastal evidence alone. (3) No persistent megathrust rupture boundaries exist. So, the possibility of a full rupture of the entire eastern AASZ, from PWS to Semidi cannot be excluded. (4) The rupture pattern in the eastern AASZ reveals superimposed cycles of multi-asperity ruptures (1964 earthquake) and clustered complementary partial ruptures, or rupture cascades. (5) The PWS section hosts the largest asperity in the eastern AASZ. (6) The shaking record of megathrust earthquakes indicates a time-dependent (quasiperiodic) behavior for the study area, but the observation of complementary clusters means that the hazards will not drop to zero but instead may even increase for a neighboring section. (7) The time-independent behavior of intraplate earthquakes implies that the intraslab hazard did not decrease following the 2016 and 2018 earthquakes. This study utilizes an integrated approach for subduction zone paleoseismology as a solution for unraveling recurrence and rupture patterns in Alaska, which can be applied worldwide.

Alaska

Insights and strategic opportunities from the USGS 2024 Per- and Polyfluoroalkyl Substances (PFAS) Interagency Workshop

Introduction In 2021, the U.S. Geological Survey (USGS) published Circular 1490 titled, “Integrated Science for the Study of Perfluoroalkyl and Polyfluoroalkyl Substances (PFAS) in the Environment: A Strategic Science Vision for the U.S. Geological Survey” (Tokranov and others, 2021). Circular 1490 was created to be a resource for USGS scientists prioritizing and planning research related to per- and polyfluoroalkyl substances (PFAS) and to be a guide for developing partnerships with other scientists, State and Federal agencies, and stakeholders engaged in PFAS research and management and mitigation of the environmental and human-health effects of PFAS. This USGS PFAS Strategic Science Vision document was intended to be the foundation for a “living strategic vision,” periodically providing updates on the state of USGS PFAS research, emerging PFAS data gaps and needs, and progress on interagency and stakeholder PFAS partnerships and priorities. To meet this objective, the USGS planned to host an Interagency and Stakeholder PFAS Workshop every 2–3 years. During September 10–12, 2024, the USGS hosted the first Interagency and Stakeholder PFAS Workshop in Reston, Virginia. The Workshop brought together experts from other Federal agencies (U.S. Environmental Protection Agency, National Institute of Environmental Health Sciences, Food and Drug Administration, Department of Defense [Air Force, Army]), State agencies (Washington Fish and Wildlife, Virginia Department of Transportation), and academia (Harvard University, University of Maryland) to address key challenges relating to the measurement and modeling of PFAS and the implications for environmental health. Participants engaged in in-depth discussions centered around six pivotal topics related to PFAS: (1) sampling protocols, methods and interpretation; (2) environmental sources, source apportionment, and occurrence; (3) environmental fate and transport; (4) human and wildlife exposure routes and risk; (5) bioconcentration, bioaccumulation, and biomagnification; and (6) ecotoxicology and effects. Each topic had three breakout sessions. A recurrent theme of workshop discussions was how data on a nationwide scale for PFAS occurrence in various environmental matrices, including air, water, food crops, biota, soil, and streambed sediment could help to advance scientific understanding. Participants noted significant geospatial data gaps, particularly in the midwestern and southern United States and the Pacific Northwest. PFAS data collection tends to be more robust along the eastern seaboard and in California. Participants stressed how enhancing the integration of large and small datasets across various agencies could help to support national scale understanding of PFAS. To address these gaps, attendees suggested leveraging datasets from Federal entities like the USGS and the U.S. Department of Defense, State agencies, and municipal utility services to develop predictive contaminant detection and transport models. Improved coordination between water quality programs and USGS research could help to facilitate access to valuable data, leading to comprehensive databases that inform PFAS point (wastewater treatment plants and landfills) and nonpoint (runoff from land, atmospheric deposition, food packaging) sources, environmental transport mechanisms, environmental detection and concentrations, potential exposure routes, and health effects on different biota, including humans. A specific request was made to develop a map demarking the depth of modern (1953 or later) groundwater, which is susceptible to surface-derived anthropogenic (that is, human-made) contamination, based on tritium-age dating. Emphasis was placed on incorporation of hydrology, groundwater flow paths, groundwater–surface water interactions, and landscape factors in predictive statistical models as a step to improve contaminant source identification and tracking. Molecular fingerprinting approaches garnered attention as techniques to link specific PFAS mixtures detected in a sample to environmental sources and levels in biota (Dávila-Santiago and others, 2022). Integrating data from abiotic (that is, water, soil, and air) and biotic (that is, living organisms) systems identified as a research opportunity. For example, understanding the composition of soils and sediments, which include a mixture of mineral, plant, and animal components, could advance understanding of exposure pathways. The discussions highlighted opportunities to explore and understand the potential redistribution and biotic exposures of PFAS from biosolid and wastewater treatment plant effluent land application practices, in addition to atmospheric releases and discharges from landfill and wastewater treatment plants. Participants identified research gaps surrounding how these sources may contribute to contamination and may affect surrounding ecosystems, including a better definition of anthropogenic background concentrations. Moving forward, the collection of co-occurrence data was noted as a means to improve understanding of complex mixtures and to leverage companion modeling efforts focused on areas with high and low contamination levels to identify areas of concern and unaffected resources. Participants emphasized how centralized USGS databases and the establishment of sample-metadata archives can help to ensure that samples are preserved and accessible for future research. In conclusion, the workshop participants identified opportunities to bridge data gaps and improve measurement techniques, modeling frameworks, databases, and communication, to enhance the understanding of PFAS and their effects on environmental and human health. Upon completion of the workshop, participants indicated an interest in developing strategic data collection, modeling, and analytical approaches to address these challenges.

Open-File Report

Hydrogeologic conceptual model of groundwater occurrence and brine discharge to the Dolores River in the Paradox Valley, Montrose County, Colorado

Salinity, or total dissolved solids (TDS), of the Colorado River is a major concern in the southwestern United States where the river provides water to about 40 million people for municipal and industrial use and is used to irrigate about 5.5 million acres of land. Much of the salinity in the Colorado River Basin is derived from natural interactions of surface water and groundwater with various geologic materials (rocks, soils, and alluvial deposits). The Dolores River in southwest Colorado is a major tributary of the Colorado River that historically accounts for about 6 percent of the salinity load to the Upper Colorado River Basin with the Paradox Valley being the primary source of salinity to the Dolores River. The Paradox Valley, one of several salt-anticline valleys in the region, is a fault-bounded topographic basin aligned with and exposing an underlying salt-anticline core. Salt deposits in the Pennsylvanian Paradox Formation of the Hermosa Group form an elongated salt diapir oriented northwest to southeast that is up to 12,000 feet (ft) thick beneath the present valley floor. Surface erosion, groundwater circulation, and weathering during Tertiary and Quaternary valley formation contributed to development of a cap rock, collapse features, breccia, and brine at the top of the exposed salt diapir. Today (2023), brine occurring in the brecciated cap rock and underlying salt deposits is in hydraulic connection with an overlying freshwater alluvial aquifer, and depending on seasonal river stage and hydrologic conditions, the brine discharges to the Dolores River causing the observed increase in salinity as the river crosses the Paradox Valley. To reduce salinity concentrations in the Dolores River, the Bureau of Reclamation (Reclamation) operates the Paradox Valley Unit (PVU). The PVU project consists of nine shallow brine pumping wells near the Dolores River and one deep disposal well where the brine is injected for disposal. When operational, the PVU pumping wells extract brine from the base of the alluvial aquifer that is piped and injected into a deep disposal well about 3 miles southwest of the PVU. The PVU became fully operational July 1, 1996, and by 2015, operation of the PVU had reduced salinity concentrations in the Dolores River by as much as 70 percent compared to pre-PVU conditions. In response to a 4.5 magnitude earthquake, injection operations, and thus PVU pumping, were ceased from March 2019 to June 2022. A trial period of PVU operation began in June 2022 with a reduced injection rate, and thus PVU pumping rate, of about two-thirds capacity to gather additional information and guide future operational decisions. In cooperation with Reclamation, the U.S. Geological Survey (USGS) developed this report to present the current (2023) understanding of groundwater and brine occurrence and discharge to the Dolores River in the Paradox Valley. Results from the compilation of spatial datasets, groundwater sampling and age dating, and aquifer tests are presented to provide improved understanding of the Paradox Valley hydrogeology, to supply datasets for a numerical groundwater-flow and brine-transport model, and to support future operations of the PVU. The hydrogeologic data provided herein, along with the most recent loading analysis for the Dolores River in the Paradox Valley, and a previous conceptual model for brine discharge to the river are used to present a conceptual understanding of groundwater occurrence in the Paradox Valley.

Colorado

Depth of magma crystallization and fluid exsolution beneath the porphyry-skarn Cu deposits at Santa Rita and Hanover-Fierro, New Mexico, USA

The depth level at which porphyry Cu–forming magmas fractionated and exsolved mineralizing fluids is actively debated. In the classic model, extensive magma fractionation occurs in large, upper crustal magma chambers, and concomitant fluid exsolution leads to forceful expulsion of residual magmas in the form of porphyry dikes, stocks, and breccia pipes, which subsequently serve as pathways for the mineralizing fluids. In contrast, some recent studies highlighting the role of deep crustal magma fractionation in the production of fertile magmas essentially deny the existence of upper crustal magma chambers at the time of mineralization. To address this, we conducted a detailed thermobarometric investigation of 13 intermediate to felsic, porphyritic intrusive rocks related to porphyry-skarn Cu mineralization at Santa Rita and Hanover-Fierro, New Mexico, United States, representing two premineralization magmas (61–60 Ma), seven synmineralization magmas (60–58 Ma), and four late- to postmineralization magmas (58–57 Ma). For each sample, the pressure of last magma crystallization before final magma ascent to the current exposure level was reconstructed based on Al-in-hornblende barometry of small hornblende inclusions trapped within quartz phenocrysts and through titanium-in-quartz (TitaniQ) thermobarometry of the host quartz phenocrysts themselves. Since quartz is one of the last crystallizing magmatic minerals, and no significant phenocryst growth could have occurred in small dikes and stocks after final magma emplacement, quartz phenocrysts and their contained hornblende inclusions record the depth of last magma crystallization before final magma ascent. When present, hornblende phenocrysts and hornblende inclusions within other major phenocrysts were also analyzed. Both quartz and hornblende barometers return consistent average pressures of 3.2 ± 0.4 kbar for the entire suite of pre- to postmineralization magmas, corresponding to depths of 11 to 14 km. The synmineralization magmas return even more consistent average pressures of 3.1 ± 0.2 kbar, corresponding to a depth of 12 ± 1 km. The volume of the mineralizing porphyry dikes and stocks at the emplacement level is far too small to have provided all the fluids and metals required to form the observed ore deposits. Therefore, the majority of the ore-forming fluids must have originated from the magmas that crystallized at 12 ± 1 km depth. The ore deposits, conversely, formed at ~5-km paleodepth. This implies that most of the mineralizing fluids traveled an average vertical distance of ~7 km from their magmatic source to the eventual site of ore precipitation. The relatively unaltered nature and low veining degree of deeper parts of mineralized porphyry dikes and stocks suggest that the fluid transport through these intrusive bodies occurred mostly at near-solidus conditions by means of fluid percolation along grain boundaries. In summary, our results suggest that (1) a large, upper crustal pluton exists ~7 km beneath the Santa Rita and Hanover-Fierro deposits; (2) abundant phenocryst crystallization occurred at this depth level; and (3) this pluton was the main source for the exsolution of ore-forming fluids. However, the investigated rocks have elevated whole-rock Sr/Y ratios, indicating magma fractionation at deep crustal levels. As a result, our preferred model is a combination of the two end-member models introduced above, with most magma fractionation having occurred in the deep crust and with residual, intermediate to felsic melts having ascended and accumulated at 11 to 14 km paleodepth, where they continued to crystallize with comparatively little crystal-liquid separation, before some of these magmas ascended further to shallow levels and quenched to porphyries.

New Mexico

Simulation of groundwater flow and brine discharge to the Dolores River in the Paradox Valley, Montrose County, Colorado

Salinity, or total dissolved solids (TDS), of the Colorado River affects agricultural, municipal, and industrial water users and is an important concern in the Western United States. In the Paradox Valley of southwestern Colorado, natural discharge of sodium-chloride brine to the Dolores River from the underlying core of a salt-valley anticline accounts for about 6 percent of the salinity load to the Colorado River. Formation of the Paradox Valley began during the Miocene, and subsequent erosion exposed the Pennsylvania Paradox Formation in the core of the anticline where a cap rock, collapse features, breccia, and sodium-chloride saturated brine developed at the top of the exposed salt diapir. The discharge of brine to the Dolores River is affected by these dissolution features, along with seasonal hydrologic conditions and density-dependent flow between older dense brine and the younger fresh groundwater in the overlying alluvial aquifer. To reduce TDS concentrations in the Dolores River through the Paradox Valley, the Bureau of Reclamation has pumped brine from a series of shallow wells adjacent to the river since July 1996. The pumped brine is collected and piped to a deep disposal well where it is injected into the Mississippian Leadville Limestone at a depth of about 4,570-meters below land surface. The pumping and injection operation is collectively known as the Paradox Valley Unit (PVU), and by 2015, the PVU had substantially reduced TDS concentrations in the Dolores River by about 70 percent. Since 2019, injection-pressure limits and related seismic activity have constrained deep-well injection and thus brine pumping at the PVU. In cooperation with the Bureau of Reclamation, the U.S. Geological Survey developed a MODFLOW-6 three-dimensional, variable-density groundwater flow and TDS transport model of the Paradox Valley to evaluate the effects of PVU pumping operations on brine discharge to the Dolores River and to guide additional research. The finite-difference model grid consists of 76 rows and 48 columns oriented from northwest to southeast in alignment with valley topography and groundwater-flow directions in the near-surface freshwater alluvial aquifer. A 7-layer hydrogeologic framework was developed from existing datasets to represent the alluvial aquifer, cap rock, collapse breccia, and groundwater flow and TDS transport from the underlying Paradox Formation salt to the Dolores River. The model represents a 33-year transient calibration period from 1987 through 2020 that includes pre-PVU conditions from 1987 through June 1996 and post-PVU conditions from July 1996 through 2020. A 1,000-year simulation of groundwater flow and coupled TDS transport computed the initial conditions for the subsequent 33-year transient simulation. Observations of precipitation, streamflow, evaporation, agricultural land use, and PVU brine pumping rates were used to specify appropriate boundary conditions to the model representing time-varying recharge, tributary streamflow, groundwater underflow, evapotranspiration (ET), and PVU pumping. Values for average monthly streamflow and TDS concentration at the upstream streamgage, the Dolores River at Bedrock (USGS streamgage 09169500), were specified as model input where the Dolores River enters Paradox Valley. Observed pumping from the PVU, water levels and TDS concentrations in groundwater, and streamflow and estimated TDS concentrations at the downstream streamgage, the Dolores River near Bedrock (USGS streamgage 09171100), were calibration targets that constrained the manual calibration of model parameters representing aquifer hydraulic conductivity, storage, streambed conductance, recharge, and (ET). Two primary model-calibration targets were the match between observed and simulated TDS mass flux from PVU pumping wells and the match between estimated and simulated TDS mass flux to the Dolores River. The simulated TDS mass withdrawn by pumping wells is calculated by the model as the product of the assigned pumping rate and simulated groundwater TDS concentrations. Because actual pumping rates were assigned as simulated values, the total simulated PVU pumping for the 33-year calibration is within 0.5 percent of the observed values. However, simulated concentrations and thus mass flux of TDS withdrawn by the PVU pumping wells were consistently about 26 percent less than observed values for all the simulated time periods (33-year simulation, pre-PVU, and post-PVU). The representation of brine inflow was explored through additional modeling to evaluate the effect of the simulated brine source on groundwater TDS concentrations. Results indicated that a saturated-salt constant-flux brine source best replicated the magnitude and transient pattern observed for TDS mass flux from PVU pumping wells. The simulated TDS mass flux to the Dolores River is compared to estimates based on observed streamflow and specific conductance (SC) data for the downstream streamgage. The calibrated model provided a close fit of simulated to measured streamflow at the downstream streamgage, and the calibrated model fit to estimated TDS concentrations at the downstream streamgage was reasonable. The greatest differences between simulated and estimated values occurred during drought periods from June 2000 to March 2003, May 2012 to June 2013, and October 2013 to October 2014, when simulated TDS concentrations in the river were greater than estimated concentrations. In general, simulated TDS mass flux to the river for the pre-PVU period is in good agreement with estimated values (2-percent difference), but the model overestimated TDS mass flux to the river by about 41 percent during the post-PVU period. The model uncertainty with respect to TDS mass flux to the river indicates other processes or model parameters not well represented by the model are affecting the system, especially during drought. During model calibration, the most sensitive parameters were identified as vertical hydraulic conductivity of the alluvial aquifer, conductance of the Dolores River streambed, ET extinction depth and rate, and recharge rate. Five 5-year scenarios of conditions for 2021–25 were simulated to assist evaluation of alternative strategies to manage the discharge of brine into the Dolores River. The first scenario simulates no PVU pumping and serves as a base case for comparison to the other scenarios. Two scenarios simulate the effects of varying withdrawal timing at an annual rate about one-third less than during 2010 through 2018. During high-flow spring snowmelt runoff periods when brine discharge is naturally minimized, PVU pumping does not substantially affect salinity in the Dolores River, and comparison of these two scenarios indicates that scheduling brine withdrawals during times of low river stage is nearly as effective at reducing TDS mass flux to the river as pumping brine year-round. Cessation of pumping during periods of high river stage may be advantageous for system maintenance, brine injection, and seismic-risk reduction. The fourth scenario tested the effect of reducing irrigation-return flow on brine discharge and predicted a slight reduction of TDS mass flux to the Dolores River, but not as great a reduction as that of using the PVU to remove brine. The fifth scenario simulated 5 years of drought conditions without PVU pumping and indicates brine discharge during drought about 15 percent greater than during average hydrologic conditions. Results from scenario 5 are consistent with the calibrated model results and indicate that aquifer properties and ET processes and parameters may be affecting simulation results during drought. The Paradox Valley groundwater model provides a reasonable overall match to observed conditions in the Dolores River. The model is useful for evaluating relative differences between brine management scenarios to inform PVU operational decisions and to identify gaps in data and process understanding. Representation of the brine source, hydraulic-conductivity parameters, and recharge and ET processes were identified as potential areas for additional field and modeling research. Additional research in the Paradox Valley might include field-data collection that provides additional information on the hydrogeologic framework, groundwater levels, groundwater TDS concentrations, stream characteristics, and aquifer properties. Additional modeling efforts could benefit from applying advanced tools for model development, calibration, and visualization including parameter-estimation and sensitivity analysis. Statistical evaluation of known model uncertainties such as hydraulic conductivity, streambed conductance, representations of the brine source, recharge, and ET could improve the match between simulated and estimated TDS mass flux from PVU pumping wells and to the Dolores River further informing model predictions and system understanding for the Paradox Valley.

Colorado

Helium detection as a guide for uranium exploration

Helium, a byproduct of radioactive decay, may prove to be a valuable indicator of the presence and distribution of uranium deposits. Recent technological advances permit the development of instrumentation not previously adapted for this purpose. Commercially available equipment can provide high sensitivity at low cost and allow reasonable mobility for field use. A truck-mounted mass-spectrometer, tuned for helium-4, permits immediate adjustment or modification of sampling patterns in response to accumulating data. The inlet system of the spectrometer has been designed to allow flexibility in gas analyses from various sample types--soil gas, atmosphere, or gases in water. Sensitivity of the instrument is better than 50 parts of helium per 10 9 parts of gas. Replicate samples and standards can be analyzed in only 3 minutes. Helium in soil gas is being used for the initial evaluation of the technique. A hollow probe, as much as 2 m long, is driven into the ground; and a 10-cc syringe is used to purge the probe and extract the gas. This sample is then injected into the inlet system and introduced into the spectrometer at constant pressure. The output signal is displayed on a chart recorder. Investigations can be performed on a qualitative, relative basis, or on a quantitative basis by comparison to calibrated helium standards. Preliminary field testing includes studies of the responses to variations in wind speed, temperature, barometric pressure, moisture, and sampling depth over extended time periods, as well as studies of geologic controls on the helium content in soil gas. Surveys over known uranium occurrences reveal some anomalous helium distributions. This report describes an updated technological approach to an old idea: that of using helium, a byproduct of uranium radioactive decay, as an exploration tool for uranium. Helium is the sixth most abundant gas found in the earth's atmosphere (Table 1). It is an inert gas and very mobile, mixing rapidly. When the alpha particles from the radioactive decay of uranium and thorium pick up two electrons, atoms of the isotope helium-4 are formed. Several helium-4 atoms are produced from each decay series of U-238, U-235, and Th-232 (fig. 1). The half-lives of the parent isotopes are5also shown in figure 1. One gram of uranium will produce ~10 5 atoms of helium-4 per second, and one gram of thorium produces ~2.5 x 10 4 atoms of helium-4 per second (fig. 2). Calculations of the helium produced from the crust and mantle reveal that 1,125 x 10 30 atoms per year are produced, but only 7 x 10 30 atoms per year escape from the earth (Damon and Kulp, 1958). More is being produced than is being lost; in fact, the total atmospheric content of helium could be produced in only 2 million years (MacDonald, 1963)! However, all the crustal and mantle helium-4 does not degas into the atmosphere as it is formed. It is trapped in crystal lattices and in pore spaces within the earth. What this means is that there is excess helium-4 in the earth--excess, that is, compared to the atmospheric concentration in equilibrium with the helium-4 escape rate into space and the helium-4 flux from the crust and mantle (Nicolet, 1957). Near-surface pockets of high helium-4 concentrations are known, and some natural gas fields are so enriched that they are the source for commercial production of helium. Work by Roberts and others (1975) has shown high helium concentration in the soil gas associated with geothermal areas; and work by Clark and Kugler (1973), Dyck (1975), and Goldak (1974), for example, has noted high helium concentrations in soils and waters in the vicinity of uranium deposits. These latter studies certainly indicate the potential of helium detection for use as an exploration tool for uranium.

Open-File Report

Quality of groundwater used for domestic supply in the Gilroy-Hollister basin and surrounding areas, California, 2022

More than 2 million Californians rely on groundwater from domestic wells for drinking-water supply. This report summarizes a 2022 California Groundwater Ambient Monitoring and Assessment Priority Basin Project (GAMA-PBP) water-quality survey of 33 domestic and small-system drinking-water supply wells in the Gilroy-Hollister Valley groundwater basin and the surrounding areas, where more than 20,000 residents are estimated to utilize privately owned domestic wells. The study area includes the Llagas subbasin in the north, the North San Benito subbasin in the south, and the surrounding uplands. The study was focused on groundwater resources used for domestic drinking-water supply, which are mostly drawn from shallower parts of aquifer systems rather than those of groundwater resources used for public drinking-water supply in the same area. This assessment characterized the quality of ambient groundwater in the aquifer before filtration or treatment, rather than the quality of drinking water delivered to the tap. To provide context, the measured concentrations of constituents in groundwater were compared to Federal and California State regulatory and non-regulatory benchmarks for drinking-water quality. A grid-based method was used to estimate the areal proportions of groundwater resources used for domestic drinking wells that have water-quality constituents present at high concentrations (above the benchmark), moderate concentrations (between one-half of the benchmark and the benchmark for inorganic constituents, or between one-tenth of the benchmark and the benchmark for organic constituents), and low concentrations (less than one-half or one-tenth the benchmark for inorganic and organic constituents, respectively). This method provides statistically representative results at the study-area scale and permits comparisons to other GAMA-PBP study areas. In the study area, inorganic constituents in groundwater were greater than regulatory benchmarks (U.S. Environmental Protection Agency [EPA] or State of California maximum contaminant levels [MCLs]) for public drinking-water quality in 24 percent of domestic groundwater resources. The inorganic constituents present at concentrations greater than MCLs for drinking water were nitrate (as nitrogen), barium, chromium, and selenium. Total dissolved solids (TDS) or manganese were present at concentrations greater than the secondary maximum contaminant levels (SMCLs) that the State of California uses as aesthetic-based benchmarks in 48 percent of domestic groundwater resources. No volatile organic compounds or pesticide constituents were present at concentrations greater than regulatory benchmarks. Total coliform bacteria and enterococci were detected in 4 percent of domestic groundwater resources. Per- and polyfluoroalkyl substances (PFAS) were detected in 19 percent of domestic groundwater resources, and 10 percent had concentrations greater than recently enacted (April 2024) EPA MCLs. Physical and chemical factors from natural and anthropogenic sources that could affect the groundwater quality were evaluated using results from statistical testing of associations between constituent concentrations and potential explanatory variables. In this study, relevant physical factors include well construction characteristics, groundwater age, site proximity to groundwater recharge or discharge zones, and potential sources of contamination. Relevant chemical factors include the initial chemistry of the recharge water, the mineralogy of the aquifer sediments, and the subsequent shifts in chemistry as biologic and geologic reactions alter groundwater in the subsurface. Nitrate concentrations were correlated to agricultural land use, distance from the boundary of the Gilroy-Hollister Valley groundwater basin, and the proportion of modern (post-1950s) water captured by the well. Denitrification under anoxic redox conditions can mitigate some nitrate derived from fertilizer application. Total dissolved solids primarily were derived from water-rock interactions with soils and aquifer materials in the study area, but there were high concentrations where agricultural practices contributed additional TDS. Mineralogy of aquifer sediments and rocks also affect barium, selenium, boron, and chromium concentrations in the Gilroy-Hollister Valley groundwater basin. PFAS were positively correlated with urban land use and the proportion of modern water captured by the well.

California

Hydrogeology, karst, and groundwater availability of Monroe County, West Virginia

Monroe County is in southeastern West Virginia, encompassing an area of 474 square miles. The area consists of karst and siliciclastic aquifers of Ordovician, Silurian, Devonian, and Mississippian age and is in parts of two physiographic provinces: the Valley and Ridge Province to the east of Peters Mountain, and the Appalachian Plateau Province to the west of Peters Mountain. This study was developed in response to inquiries from the Monroe County Commission requesting assessment of the water resources of the county to better understand the quantity of the county’s groundwater resources, for both current [2023] and future demand, and to provide information to support protection and management of the county’s valuable groundwater resources. Various products were developed for this study that provide knowledge with respect to water availability and contamination susceptibility of the karst aquifers within the county. U.S. Geological Survey (USGS) geologists conducted extensive geologic mapping in support of the project, producing (1) a countywide bedrock geologic map, (2) a countywide hydrogeologic map, and (3) a light detection and ranging (lidar)-derived countywide digital elevation model and associated sinkhole map. A significant part of this work was to map in detail the Greenbrier Group at the formation level, which prior to this study had only partially been completed. The report also includes (4) a description of the lithologic units identified as part of the geologic mapping process. U.S. Geological Survey hydrologists completed several additional products for the hydrology part of the effort, including development of (1) a countywide potentiometric surface (water-table) map, (2) a countywide base-flow stream assessment, (3) countywide water-budget estimates, (4) well log surveys for 15 wells to better understand subsurface controls on groundwater flow within the study area, (5) two groundwater tracer tests to better refine the groundwater divide from the northern and southern parts of the karst aquifer in Monroe County; and finally, based on all available data collected for the study including the potentiometric surface map, geologic map, current [2023] and legacy fluorometric groundwater tracer tests, and base-flow stream assessments, (6) groundwater-basin delineations were reassessed for principal groundwater basins within the Greenbrier aquifer. In Monroe County, four principal hydrogeologic settings produce large yields of water for residential, agricultural, and other uses. The most relied upon water-bearing zone with respect to current [2023] public water supply is from springs along Peters Mountain. These springs are derived from intervals of fractured sandstone and resultant alluvial deposits. Groundwater flows downslope through these permeable alluvial deposits and discharges at the contact with less permeable strata, such as the Reedsville Shale. The second most relied upon water-bearing zone in Monroe County is within the karstic Greenbrier Group aquifer, in which the basal Hillsdale Limestone overlies the less permeable Maccrady Shale. This geologic contact between the Hillsdale Limestone and Maccrady Shale is not only targeted as a source of water for agricultural supply but also is targeted as a source of water for residential supply. The third most relied upon water-bearing zone is composed of shallow perched aquifers within the Greenbrier Group. The discontinuous nature of these perched aquifers makes mapping their extent impossible, but they are related to permeable geologic strata, such as karstified limestones with solutionally enhanced permeability that overlies less permeable shale or chert bedrock. During geologic mapping of the county, several of these perched aquifers were documented in the Pickaway, Union, and Alderson Limestones. A fourth zone consists of springs from Ordovician carbonates at the base of Peters Mountain, which are influenced by sinking streams as well as upwelling along faults. In terms of water quantity, the most sustainable springs are those having deeper-sourced flows. Public supplies are a principal source of water used for residential and commercial supply in the region, accounting for 0.49 million gallons per day (Mgal/d) of fresh-water withdrawals (0.14 Mgal/d of groundwater and 0.35 Mgal/d of surface water) for residential and commercial use and serving 6,645 individuals (49.2 percent of the population). An estimated 6,861 people, (50.8 percent of the population) primarily rely on private wells or other unregulated sources, such as springs, and withdraw 0.55 Mgal/d of groundwater for their residential use. Public water supply in the region is primarily (71.4 percent) derived from springs and augmented by stream withdrawals (backup sources mainly during low-flow periods), with the remaining portion (28.6 percent) derived from groundwater withdrawals from wells. For rural residents, however, 100 percent of their withdrawals are derived from groundwater (wells or springs).

West Virginia

Water quality of selected springs and public-supply wells, Pine Ridge Indian Reservation, South Dakota, 1992-97

This report presents results of a water-quality study for the Pine Ridge Indian Reservation, South Dakota. The study was a cooperative effort between the U.S. Geological Survey and the Water Resources Department of the Oglala Sioux Tribe. Discharge and water-quality data were collected during 1992-97 for 14 contact springs located in the northwestern part of the Reservation. Data were collected to evaluate potential alternative sources of water supply for the village of Red Shirt, which currently obtains water of marginal quality from a well completed in the Inyan Kara aquifer. During 1995-97, water-quality data also were collected for 44 public-supply wells that serve about one-half of the Reservation's population. Quality-assurance sampling was used to evaluate the precision and accuracy of environmental samples. Ten of the springs sampled contact the White River Group, and four contact the Pierre Shale. Springs contacting the White River Group range from calcium bicarbonate to sodium bicarbonate water types. Two springs contacting the Pierre Shale have water types similar to this; however, sulfate is the dominant anion for the other two springs. In general, springs contacting the White River Group are shown to have better potential as alternative sources of water supply for the village of Red Shirt than springs contacting the Pierre Shale. Nine of the springs with better water quality were sampled repeatedly; however, only minor variability in water quality was identified. Six of these nine springs, of which five contact the White River Group, probably have the best potential for use as water supplies. Discharge from any of these six springs probably would provide adequate water supply for Red Shirt during most periods, based on a limited number of discharge measurements collected. Concentrations of lead exceeded the U.S. Environmental Protection Agency (USEPA) action level of 15 µg/L for three of these six springs. Five of these six springs also had arsenic concentrations that exceeded 10 µg/L, which could be problematic if the current maximum contaminant level (MCL) is lowered. Blending of water from one or more springs with water from the existing Inyan Kara well may be an option to address concerns regarding both quantity and quality of existing and potential sources. All nine springs that were sampled for indicator bacteria had positive detections on one or more occasions during presumptive tests. Although USEPA standards for bacteria apply only to public-water supplies, local residents using spring water for domestic purposes need to be aware of the potential health risks associated with consuming untreated water. One spring contacting the White River Group and two springs contacting the Pierre Shale exceeded 15 pCi/L for gross alpha; these values do not necessarily constitute exceedances of the MCL, which excludes radioactivity contributed by uranium and radon. Additional sampling using different analysis techniques would be needed to conclusively determine if any samples exceeded this MCL. Nine springs were sampled for selected pesticides and tritium. The pesticides atrazine, carbaryl, and 2,4-D were not detected in any of the samples. The nine springs were analyzed for tritium in order to generally assess the age of the water and to determine if concentrations exceeded the MCL established for gross beta-particle activity. Tritium results indicated two springs are composed primarily of water recharged prior to atmospheric testing of nuclear bombs and two other springs have a relatively large percentage of test-era water. The remaining five springs had tritium values that indicated some percentage of test-era water; however, additional sampling would be needed to determine whether water is predominantly pre- or post-bomb age. Of the 44 public-supply wells sampled, 42 are completed in the Arikaree aquifer, one is completed in an alluvial aquifer, and one is completed in the Inyan Kara aquifer. Water from the alluvial well is a sodium bicarbonate water type, water from Arikaree aquifer ranges from calcium bicarbonate to sodium bicarbonate types, and water from the Inyan Kara well is a calcium sulfate bicarbonate type. Of the 44 wells sampled, 28 (64 percent) tested positive for indicator bacteria in presumptive tests. Because these were single samples that generally were collected upstream from chemical treatment feeders, positive detections do not necessarily constitute exceedances of drinking-water standards. A single sample from an Arikaree well exceeded the MCL for arsenic of 50 µg/L. Arsenic exceeded 10 µg/L for six additional Arikaree wells and for the alluvial well and the Inyan Kara well, which could be problematic if the current MCL is lowered. The alluvial well also exceeded the secondary maximum contaminant level (SMCL) for dissolved solids, which is non-enforceable, and the action level for lead. The Inyan Kara well exceeded the SMCL's for iron and for manganese and the MCL of 5 pCi/L for radium-226 and 228 combined. Several Arikaree wells exceeded SMCL's for either pH, sulfate, dissolved solids, iron, or manganese. One Arikaree well exceeded the MCL of 4.0 mg/L for fluoride and another exceeded the MCL of 10 mg/L for nitrite plus nitrate. Ten Arikaree wells equalled or exceeded 15 pCi/L for gross alpha; however, these values do not necessarily constitute exceedances of the MCL, which excludes radioactivity contributed by uranium and radon. Additional sampling using different analysis techniques would be needed to conclusively determine if any samples exceeded this MCL. Eight wells, all from the Arikaree aquifer, equalled or exceeded the proposed MCL of 20 µg/L for uranium and 33 wells (75 percent) equalled or exceeded one-half of the proposed MCL. Although this standard has only been proposed, additional information regarding the extent of elevated uranium concentrations in the Arikaree aquifer, and the geochemical processes involved, may be beneficial. It was determined from analyses of uranium isotope data for five wells that the source of elevated uranium concentrations is naturally occurring, rather than anthropogenic.

South Dakota

Treatability study to evaluate bioremediation of trichloroethene at Site K, former Twin Cities Army Ammunition Plant, Arden Hills, Minnesota, 2020–22

Executive Summary Chlorinated solvents, including trichloroethene (TCE) and other chlorinated volatile organic compounds (cVOCs), are widespread contaminants that can be treated by bioremediation approaches that enhance anaerobic reductive dechlorination. Reductive dechlorination can be enhanced either through the addition of an electron donor (biostimulation) or the addition of a known dechlorinating culture (bioaugmentation) along with an electron donor. Although bioremediation has been applied at many TCE-contaminated groundwater sites, application in source zones at sites where residual dense nonaqueous phase liquid (DNAPL) is present is more limited. In this study, laboratory and field treatability tests were completed to evaluate the potential application of anaerobic bioremediation for a shallow groundwater plume containing TCE in a perched alluvial aquifer at Site K, former Twin Cities Army Ammunition Plant, Arden Hills, Minnesota, which was on the National Priorities List as the New Brighton/Arden Hills Superfund site until 2019. In addition to the presence of residual DNAPL at the site, temporal variability in groundwater flow directions and input of oxygenated recharge were possible complicating factors for the application of enhanced anaerobic biodegradation in the shallow plume. The Site K plume extends beneath the footprint of Building 103, which was demolished in 2006, and soil excavations to a maximum depth of 6 feet (ft) below ground surface in 2014 were known to leave some deeper contaminated soil in place in the TCE source area. Groundwater treatment at the site, formalized as part of the 1997 Record of Decision, has been in operation since 1986 and consists of an extraction trench at the downgradient edge of the plume to collect groundwater, which is then pumped to an on-site air stripper. Groundwater concentrations in the plume have been relatively stable since treatment began, indicating a continued source of TCE in the aquifer. The desire for a destructive remedy that would enhance the removal of cVOCs in the aquifer at Site K and shorten the remediation timeframe led the U.S. Army to request that the U.S. Geological Survey conduct a groundwater treatability study to assess bioremediation. This report describes the U.S. Geological Survey bioremediation treatability study conducted during 2020–22, including pre-design site characterization to assist in formulating the bioremediation approach, laboratory experiments to support the design of the field pilot test, and implementation and 1-year performance monitoring results for the pilot test. Pre-design site characterization included the collection of soil cores for cVOC analysis and lithologic descriptions and the re-installment of three wells to obtain hydrologic measurements and initial groundwater chemistry. Relatively flat head gradients were measured at the site, and substantial decreases in water-level elevations occurred from spring to summer (May–July 2021). Continuous water-level monitoring indicated a rapid response to precipitation. Groundwater flow velocities were consistently less than 0.5 foot per day, and the pilot bioremediation test was therefore designed with short lateral distances (about 5 ft) between injection and individual monitoring points. Soil analyses confirmed that high volatile organic compound contamination was left in place in the source area. The highest concentrations were near or in clay at the base of the perched aquifer. Concentrations of cVOCs measured in the replaced wells were consistent with historical data and had a maximum TCE concentration of 57,700 micrograms per liter (μg/L), indicative of nearby residual DNAPL based on the general rule of observed concentrations exceeding 1 percent of solubility. The primary TCE daughter product detected was 1,2-cis-dichloroethene (cisDCE), which indicated limited reductive dechlorination in the plume. Groundwater in both the source and downgradient areas was relatively reducing during the pre-design characterization, particularly in the source area where methane concentrations greater than 400 μg/L were measured. Initial laboratory tests conducted using native aquifer microorganisms from the three replacement wells showed that anaerobic TCE biodegradation rates were low when biostimulated with the addition of sodium lactate as an electron donor, also known as a carbon donor, and resulted in the production of only cisDCE. Addition of a known dechlorinating culture, WBC-2, however, resulted in rapid biodegradation and production of ethene, verifying complete reductive dechlorination of TCE. Microcosms constructed with aquifer soil collected from the site were used to evaluate other electron donors besides lactate to support reductive dechlorination by WBC-2, including corn syrup as an alternative fast-release compound and whey, soy-based vegetable oil, and 3-D Microemulsion (Regenesis, San Clemente, California) as slow-release compounds. First-order rate constants for total organic chlorine removal in these WBC-2 amended microcosms were greatest with either lactate or vegetable oil as the donor, ranging between 0.061 and 0.047 per day or corresponding half-lives of 11–15 days. Testing of commercial products in other WBC-2-bioaugmented microcosms led to selection for the field pilot test of an emulsified vegetable oil product that also contained some sodium lactate as a fast-release donor. Delaying the addition of WBC-2 relative to the donor in the microcosms resulted in the most rapid overall biodegradation rates. The selected design for the pilot test utilized three separate test plots, each about 30-ft wide and 60-ft long: plots GS1 and GS2 in the source area of the plume and plot GS3 in the downgradient area of the plume near the excavation trench. Each test plot had one injection well, one monitoring well upgradient from the injection point, and 12 surrounding monitoring wells in a grid to capture variable groundwater flow directions. Donor injections, which included a bromide tracer, were completed in October 2021, immediately following baseline sampling, and the WBC-2 culture was injected about 40 days later, between November 30 and December 2, 2021. Performance monitoring conducted until December 2022 included hydrologic measurements and analyses of cVOCs, redox-sensitive constituents, dissolved organic carbon, bromide, volatile fatty acids, compound-specific carbon isotopes, and microbial communities. The biogeochemical data collected during the pilot tests in the three treatment plots showed that enhanced, complete reductive dechlorination of cVOCs in the groundwater was achieved in the GS1 and GS3 plots. In contrast, evidence of distribution of the injected amendments and subsequent biodegradation was limited in GS2, which was in an area of more heterogeneous soil lithology and low water table elevations. The molar composition of volatile organic compounds in the GS1 and GS3 plots was dominated by ethene in wells that were reached by the injected amendments by the end of the monitoring period. In the GS1 and GS3 plots, similar patterns were observed of cVOC concentrations decreasing to near detection levels, or below, at some wells sampled in July and October 2022, whereas ethene became dominant and indicated sustained complete reductive dechlorination. Baseline cVOC concentrations were more than a factor of 10 higher in the groundwater in the GS1 plot than in GS3, but no apparent inhibition of complete dechlorination occurred. As expected from the initial pre-design site data and the laboratory experiments, enhanced dissolution of residual DNAPL coupled to biodegradation was evident in the GS1 plot, where a marked increase in dichloroethene (DCE) above the initial baseline and upgradient TCE and DCE concentrations occurred. DCE concentrations subsequently declined where DNAPL dissolution was evident, concurrent with production of vinyl chloride and then predominantly ethene. Thus, overall biodegradation rates outpaced the DNAPL dissolution and desorption and DCE production in the source area. This success in complete degradation to predominantly ethene was achieved even in areas where the DCE concentrations reached a maximum of about 30,000 μg/L. Compound specific isotope analysis of carbon in TCE, cisDCE, trans-1,2-dichloroethene, and vinyl chloride was conducted to provide another line of evidence of the occurrence and extent of anaerobic biodegradation. Along a flow path in each plot that was affected by the injected amendments, carbon isotopes in the TCE and daughter cVOCs in the groundwater became isotopically heavier, indicating biodegradation. Enhanced biodegradation rates calculated from the field tests in GS1 and GS3 showed half-lives of 36.9–75.3 days for DCE degradation and 9.48–38.5 days for ethene production. Notably, these ethene production rates calculated from the field tests are consistent with the results of WBC-2-bioaugmented microcosms amended with either lactate or vegetable oil, which had half-lives for total organic chlorine removal that ranged from 11 to 15 days. These rates indicated rapid enhanced biodegradation, which is promising for application of a full-scale bioremediation remedy. Ultimately, however, the mass of residual or sorbed TCE in the aquifer that remains accessible for dissolution and biodegradation would likely control the time required for a full-scale bioremediation effort to achieve performance goals for TCE and cisDCE specified in the Record of Decision for Site K. The field pilot tests showed that the relatively low hydraulic head gradients and temporal changes in groundwater flow directions in the shallow aquifer would add complexity to a full-scale bioremediation effort. The radius of influence (ROI) at GS1 and GS3 (16.3 ft and 12.7 ft, respectively) were close to the design ROI of 15 ft. The estimated ROI at GS2 was about four times the design ROI, but may be less reliable at this location owing to groundwater flow direction. In addition, the low temperatures following WBC-2 injection in late November to early December 2021, in combination with the low hydraulic head gradients, were probably major factors in the delay observed before the onset of enhanced biodegradation following injection of the culture. Additional test injections could be beneficial to optimize the timing of donor and culture injections with the variable temperatures and hydraulic head in the shallow aquifer.

Minnesota