USGS Science⌕ Search

SEARCH · USGS Science

Results for “Minerals and the Environment”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23Linked to original sources
USGS1999

Examining risk in mineral exploration

Successful mineral exploration strategy requires identification of some of the risk sources and considering them in the decision-making process so that controllable risk can be reduced. Risk is defined as chance of failure or loss. Exploration is an economic activity involving risk and uncertainty, so risk also must be defined in an economic context. Risk reduction can be addressed in three fundamental ways: (1) increasing the number of examinations; (2) increasing success probabilities; and (3) changing success probabilities per test by learning. These provide the framework for examining exploration risk. First, the number of prospects examined is increased, such as by joint venturing, thereby reducing chance of gambler's ruin . Second, success probability is increased by exploring for deposit types more likely to be economic, such as those with a high proportion of world-class deposits. For example, in looking for 100+ ton (>3 million oz) Au deposits, porphyry Cu-Au, or epithermal quartz alunite Au types require examining fewer deposits than Comstock epithermal vein and most other deposit types. For porphyry copper exploration, a strong positive relationship between area of sulfide minerals and deposits' contained Cu can be used to reduce exploration risk by only examining large sulfide systems. In some situations, success probabilities can be increased by examining certain geologic environments. Only 8% of kuroko massive sulfide deposits are world class, but success chances can be increased to about 15% by looking in settings containing sediments and rhyolitic rocks. It is possible to reduce risk of loss during mining by sequentially developing and expanding a mine—thus reducing capital exposed at early stages and reducing present value of risked capital. Because this strategy is easier to apply in some deposit types than in others, the strategy can affect deposit types sought. Third, risk is reduced by using prior information and by changing the independence of trials assumption, that is, by learning. Bayes' formula is used to change the probability of existence of the deposit sought on the basis of successive exploration stages. Perhaps the most important way to reduce exploration risk is to employ personnel with the appropriate experience and yet who are learning.

Natural Resources Research↗
USGS1985

Landsat multispectral scanner and Landsat thematic mapper images and interpretations of Hannapah and the Royston Hills, Nevada

This Open-File Report consists of twenty-one 35-mm slides showing material that was presented at the Fourth Thematic Conference on Remote Sensing of the Environment held in San Francisco, California on April 1-4, 1985 (Purdy and others, 1985). The work was carried out in conjunction with the U.S. Geological Survey's Conterminous U.S. Mineral Appraisal Program for the Tonopah, Nevada 1° by 2° quadrangle (fig. 1). The slides show Landsat Multispectral Scanner (MSS) images, Landsat Thematic Mapper (TM) images, and geologic interpretations made from these data.

Nevada↗
USGS1989

Studies of geology and hydrology in the Basin and Range Province, Southwestern United States, for isolation of high-level radioactive waste - Basis of characterization and evaluation

The geologic and hydrologic factors in selected regions of the Basin and Range province were examined to identify prospective areas for further study that may provide isolation of high-level radioactive waste from the accessible environment. The six regions selected for study were characterized with respect to the following guidelines: (1) Potential repository media; (2) Quaternary tectonic conditions; (3) climatic change and geomorphic processes; (4) ground-water conditions; (5) ground-water quality; and (6) mineral and energy resources. The repository medium will function as the first natural barrier to radionuclide travel by virtue of associated slow ground-water velocity. The principal rock types considered as host media include granitic, intermediate, and mafic intrusive rocks; argillaceous rocks; salt and anhydrite; volcanic mudflow (laharic) breccias; some intrusive rhyolitic plugs and stocks; partially zeolitized tuff; and metamorphic rocks. In the unsaturated zone, the permeability and hydrologic properties of the rocks and the hydrologic setting are more important than the rock type. Media ideally should be permeable to provide drainage and should have a minimal water flux The ground-water flow path from a repository to the accessible environment needs to present major barriers to the transport of radionuclides. Factors considered in evaluating the ground-water conditions include ground-water traveltimes and quality, confining beds, and earth materials favorable for retardation of radionuclides. Ground-water velocities in the regions were calculated from estimated hydraulic properties of the rocks and gradients. Because site-specific data on hydraulic properties are not available, data from the literature were assembled and synthesized to obtain values for use in estimating ground-water velocities. Hydraulic conductivities for many rock types having granular and fracture permeability follow a log-normal distribution. Porosity for granular and very weathered crystalline rock tends to be normally distributed; porosity of fractured crystalline rock probably follows a log-normal distribution. The tectonic setting needs to prevent an increase in radionuclides to the accessible environment. Data on historic seismicity and heat flow, Quaternary faults, volcanism, and uplift were used to assess the tectonic conditions. Long-term late Cenozoic rates of vertical crustal movement in the Basin and Range province range from less than 2 meters per 104 years to greater than 20 meters per 104 years. Shortterm rates of vertical movement may be more than an order of magnitude greater, based on geodetic leveling. Changes in tectonic and climatic processes may potentially cause changes in hydrologic conditions and geomorphology that could affect the integrity of a deep, mined repository either adversely or beneficially. The transition from a full-glacial climate to the current interglacial condition has occurred within the past 15,000 years. Reconstructions of the last full-glacial climate indicate that, at that time, there was greater water availability for runoff and vegetation growth than there is now. Based on the increased water availability and depending on seasonal distribution of precipitation, on soil characteristics, on topography, and on other characteristics, ground-water recharge during the full-glacial climate is estimated to have been possibly 2 to 10 or more times the modern rate. During the full-glacial climate, more than 100 lakes occupied closed basins in the province. Any increase in ground-water recharge and refilling of Pleistocene lakes will tend to decrease the distance of ground-water flow and its time of travel. The unsaturated zone this zone is considered a potential host medium where the thickness is greater than 150 m will be decreased by these changes. In contrast, incision of streams and other geomorphic, tectonic, or climatically induced changes that lower the ground-water discharge level will tend to increase the thickness of the unsaturated zone. Aggradation in basinal troughs may either decrease or increase the thickness of the unsaturated zone. Aggradation in basins that causes the ground-water discharge level to rise will tend to decrease the thickness of unsaturated zone in the adjacent uplands; aggradation in basins where the ground-water discharge level remains the same or is lowered will increase the unsaturated thickness of basin fill. Records show that, throughout late Cenozoic time in the Basin and Range province, continued vertical crustal movements have tended to maintain mountain ranges and closed basins, whereas aggradation of the basins and erosion of the mountain ranges have tended to decrease the topographic relief. Maximum rates of denudation for small basins in areas climatically similar to the Basin and Range province are about 2 meters per 104 years. For sites unaffected by stream incision and scarp retreat, a conservative estimate of erosion affecting long-term changes in depth of burial would appear to be 2 meters per 104 years, or, equal to the long-term rate of vertical crustal movement where greater than 2 meters per 104 years. The response of the ground-water conditions to climatic and geomorphically induced boundary conditions is significant from the points of: (1) The potential maximum change in the ground-water flow system; (2) the time of response of the ground-water system; and (3) the present state of the ground-water system as a result of past changes. Effects of longterm climatic and tectonic changes on hydrologic and geomorphic conditions differ from area to area, and rates of change of geomorphic and hydrologic conditions may vary significantly. Therefore, sitespecific studies need to be made to assess the long-term integrity of deep, mined repositories.

Arizona, California, Idaho, Nevada, New Mexico, Te↗
USGS2005

Mineral of the month: chromium

Chromium is one of the most indispensable industrial metals and it plays an essential but hidden role in daily life. Chromium is used in many consumer and building products, and it contributes to a clean, efficient and healthy environment.

Geotimes↗
USGS2008

U.S. Geological Survey Karst Interest Group Proceedings, Bowling Green, Kentucky, May 27-29, 2008

*INTRODUCTION AND ACKNOWLEDGMENTS* Karst aquifer systems are present throughout parts of the United States and some of its territories. The complex depositional environments that form carbonate rocks combined with post-depositional tectonic events and the diverse climatic regimes under which these rocks were formed result in unique hydrologic systems. The dissolution of calcium carbonate and the subsequent development of distinct and beautiful landscapes, caverns, and springs have resulted in some karst areas of the United States being designated as national or state parks and commercial caverns. Karst aquifers and landscapes that form in tropical areas, such as the north coast of Puerto Rico, differ greatly from karst areas in more arid climates, such as central Texas or western South Dakota. Many of these public and private lands contain unique flora and fauna associated with the hydrologic systems in these karst areas. As a result, multiple Federal, State, and local agencies have an interest in the study of karst terrains. Carbonate sediments and rocks (limestone and dolomite) are composed of greater than 50 percent carbonate minerals and the predominant carbonate mineral is calcium carbonate or limestone (CaCO3). Unlike terrigenous clastic sedimentation, the depositional processes that produce carbonate rocks are complex, involving both biological and physical processes. These depositional processes impact greatly the development of permeability of the sediments. Carbonate minerals readily dissolve or precipitate depending on the chemistry of the water flowing through the rock, thus the study of both marine and meteoric diagenesis of carbonate sediments is multidisciplinary. Even with a better understanding of the depositional environment and subsequent diagenesis, the dual porosity nature of karst aquifers presents challenges to scientists attempting to study ground-water flow and contaminant transport. Many of the major springs and aquifers in the United States are developed in carbonate rocks and karst areas. These aquifers and the springs that discharge from them, serve as major water-supply sources and as unique biological habitats. Commonly, there is competition for the water resources of karst aquifers, and urban development in karst areas can impact the ecosystem and water quality of these aquifers. The concept for developing a Karst Interest Group evolved from the November 1999 National Ground-Water Meeting of the U.S. Geological Survey (USGS), Water Resources Division. As a result, the Karst Interest Group was formed in 2000. The Karst Interest Group is a loose-knit grass-roots organization of USGS employees devoted to fostering better communication among scientists working on, or interested in, karst hydrology studies. The mission of the Karst Interest Group is to encourage and support interdisciplinary collaboration and technology transfer among USGS scientists working in karst areas. Additionally, the Karst Interest Group encourages cooperative studies between the different disciplines of the USGS and other Department of Interior agencies and university researchers or research institutes. The first Karst Interest Group workshop was held in St. Petersburg, Florida, February 13-16, 2001, in the vicinity of karst features of the Floridan aquifer system. The proceedings of that first meeting, Water-Resources Investigations Report 01-4011 are available online at: http://water.usgs.gov/ogw/karst/ The second Karst Interest Group workshop was held August 20-22, 2002, in Shepherdstown, West Virginia, in close proximity to the carbonate aquifers of the northern Shenandoah Valley. The proceedings of the second workshop were published in Water-Resources Investigations Report 02-4174, which is available online at the previously mentioned website. The third workshop of the Karst Interest Group was held September, 12-15, 2005, in Rapid City, South Dakota, which is in close proximity to karst features

Scientific Investigations Report↗
USGS2006

Beyond the obvious limits of ore deposits: The use of mineralogical, geochemical, and biological features for the remote detection of mineralization

Far field features of ore deposits include mineralogical, geochemical, or biological attributes that can be recognized beyond the obvious limits of the deposits. They can be primary, if formed in association with mineralization or alteration processes, or secondary, if formed from the interaction of ore deposits with the hydrosphere and biosphere. This paper examines a variety of far field features of different ore deposit types and considers novel applications to exploration and discovery. Primary far field features include mineral and rock chemistry, isotopic or element halos, fluid pathways and thermal anomalies in host-rock sequences. Examples include the use of apatite chemistry to distinguish intrusive rocks permissive for iron oxide copper gold (IOCG) and porphyry deposits; resistate mineral (e.g., rutile, tourmaline) chemistry in exploration for volcanogenic massive sulfide (VMS), orogenic gold, and porphyry deposits; and pyrite chemistry to vector toward sedimentary exhalative (sedex) deposits. Distinctive whole-rock geochemical signatures also can be recognized as a far field feature of porphyry deposits. For example, unique Sr/Y ratios in whole-rock samples, used to distinguish barren versus fertile magmas for Cu mineralization, result from the differentiation of oxidized hydrous melts. Anomalous concentrations of halogen elements (Cl, Br, and I) have been found for distances of up to 200 m away from some mineralized centers. Variations in isotopic composition between ore-bearing and barren intrusions and/or systematic vertical and lateral zonation in sulfur, carbon, or oxygen isotope values have been documented for some deposit types. Owing to the thermal aureole that extends beyond the area of mineralization for some deposits, detection of paleothermal effects through methods such as conodont alteration indices, vitrinite or bitumen reflectance, illite crystallinity, and apatite or zircon thermochronology studies also can be valuable, particularly for deposits with a low-temperature thermal history. A number of newly investigated secondary far field features include the development of reduced columns by electrochemical processes in transported overburden, geochemical dispersion related to the expulsion of groundwater from tectonic and seismic compression, dispersion of vapor above ore deposits, and geochemical dispersion related to biological processes. Redox gradients have been found between underlying reduced and overlying oxidized environments associated with sulfide bodies, which result in mass transfer through electro-chemical dispersion. Recent studies have characterized the pH, oxidation-reduction potential (ORP), and self potential (SP) in overburden overlying sulfide-hosted gold and VMS deposits. Lateral migration of metals in groundwater is well understood from normal groundwater flow, but the processes responsible for vertical mass transfer of groundwater and its dissolved components have been recognized only recently. One process, termed cyclical dilatancy pumping, expels groundwater during and after earthquake events, which can cause the redistribution of metals around deposits in some environments. Soil gases are of interest owing to their high degree of mobility through the vadose zone in transported overburden. Numerous soil gas species (CO2, O2, Hg, Rn, He, sulfur compounds, and light hydrocarbons) have been measured and interpreted as diagnostic of some buried mineral deposits, and some evidence suggests a possible link between vapor dispersion and metal enrichment in soil. Geochemical enrichment in plant material and soils through successive growth-death cycles is well established, but the important role of microorganisms is now increasingly evident. Microorganisms significantly enhance the kinetics of sulfide oxidation and influence the distribution of metals around ore deposits. The presence of metal-resistant bacteria and enhanced concentrations of sulfate-reducing bacteria in exotic overburd

Economic Geology↗
USGS2016

A microbial arsenic cycle in sediments of an acidic mine impoundment: Herman Pit, Clear Lake, California

The involvement of prokaryotes in the redox reactions of arsenic occurring between its +5 [arsenate; As(V)] and +3 [arsenite; As(III)] oxidation states has been well established. Most research to date has focused upon circum-neutral pH environments (e.g., freshwater or estuarine sediments) or arsenic-rich “extreme” environments like hot springs and soda lakes. In contrast, relatively little work has been conducted in acidic environments. With this in mind we conducted experiments with sediments taken from the Herman Pit, an acid mine drainage impoundment of a former mercury (cinnabar) mine. Due to the large adsorptive capacity of the abundant Fe(III)-rich minerals, we were unable to initially detect in solution either As(V) or As(III) added to the aqueous phase of live sediment slurries or autoclaved controls, although the former consumed added electron donors (i.e., lactate, acetate, hydrogen), while the latter did not. This prompted us to conduct further experiments with diluted slurries using the live materials from the first incubation as inoculum. In these experiments we observed reduction of As(V) to As(III) under anoxic conditions and reduction rates were enhanced by addition of electron donors. We also observed oxidation of As(III) to As(V) in oxic slurries as well as in anoxic slurries amended with nitrate. We noted an acid-tolerant trend for sediment slurries in the cases of As(III) oxidation (aerobic and anaerobic) as well as for anaerobic As(V) reduction. These observations indicate the presence of a viable microbial arsenic redox cycle in the sediments of this extreme environment, a result reinforced by the successful amplification of arsenic functional genes ( aioA , and arrA ) from these materials.

California↗
USGS2008

Understanding contaminants associated with mineral deposits

Interdisciplinary studies by the U.S. Geological Survey (USGS) have resulted in substantial progress in understanding the processes that control the release of metals and acidic water from inactive mines and mineralized areas, the transport of metals and acidic water to streams, and the fate and effect of metals and acidity on downstream ecosystems. The potential environmental effects associated with abandoned and inactive mines, resulting from the complex interaction of a variety of chemical and physical processes, is an area of study that is important to the USGS Mineral Resources Program. Understanding the processes contributing to the environmental effects of abandoned and inactive mines is also of interest to a wide range of stakeholders, including both those responsible for managing lands with historically mined areas and those responsible for anticipating environmental consequences of future mining operations. The recently completed (2007) USGS project entitled 'Process Studies of Contaminants Associated with Mineral Deposits' focused on abandoned and inactive mines and mineralized areas in the Rocky Mountains of Montana, Colorado, New Mexico, Utah, and Arizona, where there are thousands of abandoned mines. Results from these studies provide new information that advances our understanding of the physical and biogeochemical processes causing the mobilization, transport, reaction, and fate of potentially toxic elements (including aluminum, arsenic, cadmium, copper, iron, lead, and zinc) in mineralized near-surface systems and their effects on aquatic and riparian habitat. These interdisciplinary studies provide the basis for scientific decisionmaking and remedial action by local, State, and Federal agencies charged with minimizing the effects of potentially toxic elements on the environment. Current (2007) USGS research highlights the need to understand (1) the geologic sources of metals and acidity and the geochemical reactions that release them from their sources, (2) the pathways that facilitate transport from those sources, and (3) the processes that control the fate of the elements once released from the sources. Experts in the fields of economic geology, structural geology, mineralogy, geophysics, geochemistry, hydrology, ground-water modeling, microbiology, and toxicology came together for a series of studies that address these relationships on scales ranging from the microscopic to the watershed. This Circular presents results and highlights from the detailed, interdisciplinary studies that include investigations in both mining-affected areas and mineralized but unmined areas. The first section of the Circular describes laboratory and site-scale field investigations that primarily focus on mineralogic and biologic controls on the source and release of metals and acidity from mine-waste rock and hydrothermally altered areas. The second section describes a set of basin- to watershed-scale studies that not only investigate the source and release of metals and acidity but also the transport of these constituents away from the source areas. The third section is a summary of results from postremediation ecosystem monitoring. For more information on these and other project-related studies, please visit the project Web site at http://minerals.cr.usgs.gov/projects/contaminants/index.html. The Web site includes a complete bibliography and detailed descriptions of each interdisciplinary study.

Circular↗
USGS1990

Relationships among macerals, minerals, miospores and paleoecology in a column of Redstone coal (Upper Pennsylvanian) from north-central West Virginia (U.S.A.)

Two distinct paleoenvironments are represented in vertical succession in a column of Redstone coal in north-central West Virginia as indicated by a study of 37 consecutive 3-cm (0.1 ft) increments analyzed for ash yield, petrographic composition, low-temperature ash mineralogy and palynomorph abundances. Abundance profiles were constructed for ash, 12 petrographic components, 3 minerals and 5 miospore assemblages. The profiles and calculated correlation coefficients show close relationships between several constituents. Components that increased in abundance upward in the coal bed were a collinite type > 50 microns in thickness, cutinite, and miospores affiliated with calamites, herbaceous lycopods, cordaites and herbaceous ferns. Components that decreased in abundance upward were a collinite type < 50 microns in thickness, inertodetrinite, tree fern miospores, quartz, illite and ash yield. Components were correlated with ash yield to infer the swamp geochemical conditions that contributed to the low-ash (7%) upper one-third of the coal bed and the higher-ash (16%) lower two-thirds of the coal bed. Components that correlate positively with increased ash were the collinite type < 50 μ m thickness, inertodetrinite, tree fern miospores, illite and quartz. Components that correlate negatively with increased ash were the collinite type > 50 μ m in thickness, cutinite, calamite and cordaite miospores and kaolinite. Significant correlations occurred between ash yield and the collinite types > 50 and < 50 μ m in thickness but no significant correlation was found between ash yield and total vitrinite-group content. This is interpreted to show that division of vitrinite macerals by size is important in petrographic paleoenvironmental studies. Paleoecologic interpretations based upon these correlations suggest that two distinct, planar, probably topogenous paleoecologic environments are represented in this column of the Redstone coal. The lower two-thirds of the coal bed was interpreted to have accumulated in a planar swamp in which significant introduction of detrital or dissolved mineral matter, and significant anaerobic and moderate oxidative degradation of the peat occurred. The flora of this paleoenvironment was dominated by tree ferns. The paleoenvironment during accumulation of the upper one-third of the coal bed was also interpreted to have been a planar swamp, but one in which moderate to low introduction of detrital or dissolved mineral matter, and minor anaerobic and oxidative degradation of the peat occurred. The dominant flora of this paleoenvironment consisted mainly of calamites with fewer cordaites and herbaceous ferns. This study shows that valuable paleoecologic information may be obtained by sampling closely spaced vertical increments. No mixing of detrital sediments with the peat was observed in coal layers immediately adjacent to the parting or the overlying sandstone unit.

International Journal of Coal Geology↗
USGS1999

Design approaches in quarrying and pit-mining reclamation

Reclaimed mine sites have been evaluated so that the public, industry, and land planners may recognize there are innovative designs available for consideration and use. People tend to see cropland, range, and road cuts as a necessary part of their everyday life, not as disturbed areas despite their high visibility. Mining also generates a disturbed landscape, unfortunately one that many consider waste until reclaimed by human beings. The development of mining provides an economic base and use of a natural resource to improve the quality of human life. Equally important is a sensitivity to the geologic origin and natural pattern of the land. Wisely shaping out environment requires a design plan and product that responds to a site's physiography, ecology, function, artistic form, and publication perception. An examination of selected sites for their landscape design suggested nine approaches for mining reclamation. The oldest design approach around is nature itself. Humans may sometimes do more damage going to an area in the attempt to repair it. Given enough geologic time, a small-site area, and stable adjacent ecosystems, disturbed areas recover without mankind's input. Visual screens and buffer zones conceal the facility in a camouflage approach. Typically, earth berms, fences, and plantings are used to disguise the mining facility. Restoration targets social or economic benefits by reusing the site for public amenities, most often in urban centers with large populations. A mitigation approach attempts to protect the environment and return mined areas to use with scientific input. The reuse of cement, building rubble, macadam meets only about 10% of the demand from aggregate. Recognizing the limited supply of mineral resources and encouraging recycling efforts are steps are steps in a renewable resource approach. An educative design approach effectively communicates mining information through outreach, land stewardship, and community service. Mine sites used for art show a celebration of beauty and experience -- abstract geology. The last design approach combines art and science in a human-nature ecosystem termed integration. With environmental concerns, an operating or reclaimed mine site can no longer be considered isolated from its surroundings. Site analysis of mine works needs to go beyond site-specific information and relate to the regional context of the greater landscape. Understanding design approach can turn undesirable features (mines and pits) into something perceived as desirable by the public.

Book↗
USGS2016

Marine phosphorites as potential resources for heavy rare earth elements and yttrium

Marine phosphorites are known to concentrate rare earth elements and yttrium (REY) during early diagenetic formation. Much of the REY data available are decades old and incomplete, and there has not been a systematic study of REY distributions in marine phosphorite deposits that formed over a range of oceanic environments. Consequently, we initiated this study to determine if marine phosphorite deposits found in the global ocean host REY concentrations of high enough grade to be of economic interest. This paper addresses continental-margin (CM) and open-ocean seamount phosphorites. All 75 samples analyzed are composed predominantly of carbonate fluorapatite and minor detrital and authigenic minerals. CM phosphorites have low total REY contents (mean 161 ppm) and high heavy REY (HREY) complements (mean 49%), while seamount phosphorites have 4–6 times higher individual REY contents (except for Ce, which is subequal; mean ΣREY 727 ppm), and very high HREY complements (mean 60%). The predominant causes of higher concentrations and larger HREY complements in seamount phosphorites compared to CM phosphorites are age, changes in seawater REY concentrations over time, water depth of formation, changes in pH and complexing ligands, and differences in organic carbon content in the depositional environments. Potential ore deposits with high HREY complements, like the marine phosphorites analyzed here, could help supply the HREY needed for high-tech and green-tech applications without creating an oversupply of the LREY.

Minerals↗
USGS2023

Earth’s mantle composition revealed by mantle plumes

Mantle plumes originate at depths near the core−mantle boundary (~2,800 km). As such, they provide invaluable information about the composition of the deep mantle and insight into convection, crustal formation, and crustal recycling, as well as global heat and volatile budgets. In this Review, we discuss the effectiveness and challenges of using isotopic analyses of plume-generated rocks to infer mantle composition and to constrain geodynamic models. Isotopic analyses of plume-derived ocean island basalts, including radiogenic (Sr, Nd, Pb, Hf, W, noble gas) and stable isotopes (Li, C, O, S, Fe, Tl), permit determination of mantle plume composition, which in turn generate insight into mantle plume origins, dynamics, mantle heterogeneities, early-formed mantle reservoirs, crustal recycling processes, core−mantle interactions and mantle evolution. Nevertheless, the magmatic flux, temperature, tectonic environment and compositions of mantle plumes can vary. Consequently, plumes and their melts are best evaluated along a spectrum that acknowledges their different properties, particularly mantle flux, before making interpretations about the interior of the Earth. To provide insight into specific mantle and plume processes, future work should document correlations across elemental and isotopic data sets on the same sample powder, coordinate targeting sampling strategies, and refine stable isotopic fractionation factors through experiments. Such work will benefit from collaboration across geochemical laboratories, as well as among geochemists, mineral physicists, seismologists and geodynamicists.

Nature Reviews in Earth and Environment↗
USGS1987

Methods for geochemical analysis

The laboratories for analytical chemistry within the Geologic Division of the U.S. Geological Survey are administered by the Office of Mineral Resources. The laboratory analysts provide analytical support to those programs of the Geologic Division that require chemical information and conduct basic research in analytical and geochemical areas vital to the furtherance of Division program goals. Laboratories for research and geochemical analysis are maintained at the three major centers in Reston, Virginia, Denver, Colorado, and Menlo Park, California. The Division has an expertise in a broad spectrum of analytical techniques, and the analytical research is designed to advance the state of the art of existing techniques and to develop new methods of analysis in response to special problems in geochemical analysis. The geochemical research and analytical results are applied to the solution of fundamental geochemical problems relating to the origin of mineral deposits and fossil fuels, as well as to studies relating to the distribution of elements in varied geologic systems, the mechanisms by which they are transported, and their impact on the environment.

Bulletin↗
USGS2019

Tectono-magmatic evolution of porphyry belts in the central Tethys region of Turkey, the Caucasus, Iran, western Pakistan, and southern Afghanistan

Exploration in the central Tethys region of Turkey, Armenia, Azerbaijan, Georgia, Iran, and weste rn Pakistan has led to the identification of the giant Reko Diq (24 Mt Cu and 1300 t Au), Sar Cheshmeh (8.9 Mt Cu and 0.46 Mt Mo), Sungun (5.1 Mt Cu and 0.20 Mt Mo), and Kadjaran (4.6 Mt Cu, 0.94 Mt Mo, and 1100 t Au), and 10 other large (1–2 Mt Cu) porphyry deposits including Saindak, Cevizlidere, Teghout, Meiduk, and Halilağa. Continued exploration efforts have also resulted in the development of porphyry-related gold deposits such as Kişladağ (9.6 Moz Au), Çöpler (3.7 Moz Au), Aği Daği (1.7 Moz Au), and Sary Gunay (3.0 Moz Au), and in the generation of several other promising exploration projects. The distribution in space and time of porphyry deposits in the central Tethys region was shaped by complex pre- to post-mineral tectonic, igneous, collisional, uplift and burial events. These events are represented by a partially-overlapping and variably exhumed and covered collage of twenty-six Early Jurassic to Holocene magmatic belts permissive for the occurrence of porphyry deposits (porphyry tracts and sub-tracts). Twelve tracts or sub-tracts are characterized by compressional continental arcs that formed on drifting terranes or continental margins, 10 developed in compressional to extensional intra-oceanic arc and backarc-rift settings, and 4 formed in extensional post-collisional environments over amalgamated terranes. Eight of these belts were variably affected by coeval and younger metamorphic, fold-and-thrust, and extensional faulting events. Fifty-four porphyry Au-(Cu), Cu-Au, Cu-Mo, Mo-Cu deposits, 15 porphyry-related Au, Au-(Mo) and W-(Mo-Au) deposits, 239 porphyry prospects, and 68 other porphyry-related mineral sites were identified in the study region. Of the 376 porphyry and porphyry-related sites, about 11% formed in island arc, 42% in continental arc, 20% in backarc, and 27% in post-collisional settings. Of the 69 porphyry and porphyry-related deposits, 7% developed in intra-oceanic arc, 41% in continental arc, 27% in backarc, and 25% in post-collisional settings. The largest occur in either compressional continental arc (18 deposits including the Reko Diq and Sar Cheshmeh giants) or post-collisional (13 deposits including the Kadjaran and Sungun giants) environments. Ninety percent of the largest porphyry or porphyry-related deposits occur in only 9 of the 26 permissive porphyry tracts or sub-tracts. Moreover, 88, 90, and 77% of the identified Cu, Mo, and Au resources are contained in porphyry deposits that occur in only 4 of these 9 tracts. Of these 4 tracts, 3 outline arc settings, and one delimits a post-collisional environment. The compositional diversity of porphyry intrusions in these tectono-magmatic environments generally varies from island arc settings with the most restricted range (partly alkaline but mainly calc-alkaline dioritic to granodioritic-tonalitic), to continental arc (calc-alkaline dioritic-quartz dioritic, granodioritic, quartz monzonitic-granitic, and less commonly mildly alkaline), to backarc (mildly alkaline and calc-alkaline dioritic to granitic), to post-collisional settings with the most expansive range (alkaline and calc-alkaline mafic to felsic, and weakly peraluminous). Metal associations also vary broadly as a function of porphyry intrusion composition from weakly peraluminous to metaluminous felsic (Mo[±W ± Cu]; <2% of porphyry-related systems [i.e., Tyrnyauz]), to metaluminous felsic and intermediate (Cu-Mo[±Au]; 85% [i.e., Cevizlidere, Haft Cheshmeh, Kahang, Sar Cheshmeh, Sungun, Teghout, Reko Diq, Saindak]), to mildly alkaline felsic and intermediate (Cu-Au[±Mo] [i.e., Agarak, Kadjaran, Kale Kafi]) and mafic (Au-Cu; 12% [i.e., Çöpler]), and to alkaline felsic (Au-Mo; 1% of porphyry-related systems [i.e., Kişladağ). Tectonic changes were critical in triggering the formation of large porphyry deposits in the region. Large porphyry deposits were preferentially emplaced in continental arc settings shortly before major collisional events (Dar Alu, Kahang, Meiduk, Now Chun, and the giant Sar Cheshmeh and Reko Diq deposits), or in post-subduction environments shortly after collision (Bakirçay, Güzelyayla, Haft Cheshmeh, Masjed Daghi, and the giant Kadjaran and Sungun deposits) or during periods of prominent extension (Aği Daği, Halilağa, Kişladağ, Sari Gunay, and Zarshuran porphyry-related deposits). Collision-induced uplift, erosion, and removal of coeval volcanic rocks favorably exposed the hypabyssal level of subduction-related porphyry deposits. Extensional structures that developed parallel and orthogonal to the compressional principal stress component along transtensional or transpressional strike-slip faults or in pull-apart basins commonly controlled porphyry-related deposits in post-collisional settings. The latter deposits typically exhibit shallow epithermal levels of emplacement because of preservation by burial. Seventeen porphyry deposits and one porphyry-related deposit in the study region are reported to contain significant supergene resources. Relatively mature levels of secondary copper enrichment in dominantly granodioritic to granitic porphyry deposits occur in areas where large pyrite-rich quartz-sericite alteration zones have been preserved and exposed to surface oxidation (Güzelyayla and Ulutaş in northeastern Turkey; Agarak, Ankavan, Dastakert, Kadjaran, and Teghout in Armenia; Ali Javad in northern Iran; Kale Kafi in central Iran; Darreh Zar, Meiduk, Now Chun, and Sar Cheshmeh in southeastern Iran; and Tanjeel in southwestern Pakistan). Chalcocite blankets also developed over porphyry deposits in regions where significant post-mineral faulting has occurred (Muratdere and Sarıçayıryayla in western Turkey). Normal faulting also enhanced secondary enrichment of gold in the Halilağa porphyry and Sary Gunay porphyry-related deposits located respectively in western Turkey and northern Iran. Evaluation of provincial as well as local controls strongly suggests that continued exploration in the region will lead to the identification of additional porphyry and porphyry-related deposits. These deposits will likely be found under younger cover formations in porphyry belts that are already known, and in association with superjacent high- and intermediate-sulfidation epithermal deposits, or increasingly peripheral skarn, carbonate-replacement, and sediment-hosted deposits. Application of suitable exploration techniques to detect concealed and/or deformed deposits in porphyry belts that remain under-explored may also prove productive.

Tethys region↗
USGS1968

Environment of ore deposition at the Mex-Tex deposits, Hansonburg District, New Mexico, from studies of fluid inclusions

These deposits , in Pennsylvanian limestone and shale, contain barite, fluorite, low-silver galena with "J-type" lead, and quartz, and only minor amounts of other minerals. Mineralization occurs in veins, in blankets of bedded, rhythmically banded "coontail" ore , and in vuggy, coarsely crystalline open-space fillings in tectonic and solution channels in limestone adjacent to faults. Except for widespread silicification, the mineralization is very similar to that of the southern Illinois deposits . The main stages of hypogene mineralization are: 1) sphalerite, pyrite, galena and chalcopyrite; 2) five easily recognizable substages of fluorite with intermittent quartz and barite; and 3) late calcite.More than 500 primary and 2,500 pseudosecondary inclusions , mainly from fluorite, were studied on the freezing and heating microscope stages. Some primary inclusions contain organic matter. Gross supercooling indicates slow ore - fluid movement. Recognizable planes of pseudo-secondaries (each containing 20-200 inclusions ) yield data essentially identical with coeval primaries, but the few planes of presumed secondaries do not.The first three substages of fluorite formed from fluids that were essentially constant in temperature at 186°-205° C (assumed pressure correction +10° C), but increased in salinity from aproximately 10 up to 15 weight percent salts. Succeeding substages formed at gradually decreasing temperatures (to about 140° C) and increasing salinity (maximum 17%), with breaks marking several individual substages. A few inclusions in an early barite have anomalously low homogenization temperatures. Coarse selenite has primary inclusions full of fresh water and hence is presumed to be supergene.These data do not prove any given theory or origin for the fluids or the deposits , but they do place some limits on possible mechanisms of origin.

New Mexico↗
USGS1990

National Coastal Geology Program: a plan of geologic research on coastal erosion, coastal wetlands, polluted sediments, and coastal hard-mineral resources

More than 50 percent of the U.S. population currently live within 50 miles of an ocean, Great Lake, or major estuary. According to forecasts, the concentration of people along our coastlines will continue to increase into the 21st century. In addition to residential and commercial buildings and facilities worth tens of billions of dollars, the coasts and associated wetlands are natural resources of tremendous value, with estimates in excess of $13 billion per year for commercial and recreational fisheries alone. Human activities and natural processes are stressing the coastal environment. * Each of the coastal states and island territories is suffering problems related to coastal erosion. * Deterioration of wetlands is widespread and of great public concern. * Pollutants carried by rivers or runoff are discharged directly into coastal waters and accumulate in the sediments on the sea floor, in some areas causing damage to living resources and presenting a threat to public health. * Onshore sources for hard-mineral resources, such as sand and gravel used for construction purposes, are becoming increasingly difficult to find. New sources are being sought in coastal waters. Coastal issues will become even more important into the next century if sea level is significantly influenced by climate change and other factors.

Monograph↗
USGS2021

The trajectory of soil development and its relationship to soil carbon dynamics

It has been postulated that the amount of soil organic carbon (SOC) associated with soil minerals exhibits a threshold relationship in response to effective soil moisture (estimated as precipitation less evapotranspiration). To better characterize the role of moisture in influencing mechanisms of SOC storage during pedogenesis, we compare soils from two different chronosequence sites: the Santa Cruz and Mattole River marine terraces that together form a soil age-by-climate gradient (i.e., climo-chronosequence). Our results demonstrate how variation in the effective soil moisture may drive soil development along divergent pedogenic trajectories, resulting in variations in the form and depth distribution of secondary weathering products. In particular, the residual metals Fe and Al are directly related to the type of secondary minerals that accumulate during weathering, and these variations are coupled to differences in the storage and long-term preservation of SOC both within and between soils. Over time, these differences in soil development may lead to ‘pedogenic thresholds’ that further differentiate soil characteristics and influence SOC dynamics. In this case, the pedogenic threshold takes the form of clay-rich argillic horizons that once formed, inhibit aqueous transport, decouple shallow and deep soil environments, and potentially limit SOC inputs and increase microbial recycling in deep soils. Our data suggest argillic horizon development is favorable in the drier Santa Cruz soils, where kaolinite is the dominant secondary weathering product. In contrast, greater available moisture in soils of the Mattole chronosequence drive a different weathering trajectory characterized by the accumulation of more amorphous secondary minerals. As a result, the Mattole soils and do not exhibit argillic horizon development but are instead characterized by greater accumulation of SOC across all depths sampled. Overall, our results illustrate how the interaction of climate (i.e., moisture) and time may shape the trajectory of soil development and the dynamics of SOC storage and preservation.

California↗
USGS2015

Long-term anoxia and release of ancient, labile carbon upon thaw of Pleistocene permafrost

The fate of permafrost carbon upon thaw will drive feedbacks to climate warming. Here we consider the character and context of dissolved organic carbon (DOC) in yedoma permafrost cores from up to 20 m depth in central Alaska. We observed high DOC concentrations (4 to 129 mM) and consistent low molecular weight organic acid concentrations in three cores. We estimate a DOC production rate of 12 µmol DOC m −2 yr −1 based on model ages of up to ~200 kyr derived from uranium isotopes. Acetate C accounted for 24 ± 1% of DOC in all samples. This proportion suggests long-term anaerobiosis and is likely to influence thaw outcomes due to biolability of acetate upon release in many environments. The combination of uranium isotopes, ammonium concentrations, and calcium concentrations explained 86% of the variation in thaw water DOC concentrations, suggesting that DOC production may be related to both reducing conditions and mineral dissolution over time.

Geophysical Research Letters↗