USGS Science⌕ Search

SEARCH · USGS Science

Results for “Marine Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23Linked to original sources
USGS1990

Cold-front driven storm erosion and overwash in the central part of the Isles Dernieres, a Louisiana barrier-island arc

Tropical and extratropical storms produce significant erosion on the barrier islands of Louisiana. Over the past 100 years, such storms have produced at least 2 km of northward beach-face retreat and the loss of 63% of the surface area of the Isles Dernieres, a low-lying barrier-island arc along the central Louisiana coast. Elevations on the islands within the arc are typically less than 2 m above mean sea level. The islands typically have a washover-flat topography with occasional, poorly developed, dune-terrace topography consisting of low-lying and broken dunes. The central part of the arc consists of salt-marsh deposits overlain by washover sands along the Gulf of Mexico shoreline. Sand thicknesses range from zero behind the beach, to less than 2 m under the berm crest, and back to zero in the first nearshore trough. The sand veneer is sufficiently thin that storms can strip all the sand from the beach face, exposing the underlying marsh deposits. The geomorphic changes produced by cold fronts, a type of extratropical storm that commonly affect the Isles Dernieres between late fall and early spring are described. Between August 1986 and September 1987, repeated surveys along eleven shore-normal transects that covered 400 m of shoreline revealed the timing and extent of cold-front-produced beach change along a typical section of the central Isles Dernieres. During the study period, the beach face retreated approximately 20 m during the cold-front season but did not rebuild during the subsequent summer. Because the volume of sand deposited on the backshore (5600 m 3 ) was less than the volume of material lost from the beach face (19,200 m 3 ), approximately 13,600 m 3 of material disappeared. Assuming that underlying marsh deposits decrease in volume in direct proportion to the amount of beach-face retreat, an estimate of the mud loss during the study period is 14,000 m 3 . Thus, the decrease in volume along the profiles can be accounted for without removing any sand from the area, suggesting that a major effect of cold fronts is first to strip the sand from the beach face and then to erode the underlying marsh deposits. After being eroded, the mud is lost from the islands because currents transport it away from the islands.

Marine Geology↗
USGS1990

Stability of giant sand waves in eastern Long Island Sound, U.S.A.

A combination of a highly accurate bathymetric surveying technique and in-situ submersible observations and measurements were used to assess the migrational trends and morphological changes of large sand waves ( Ht ≤ 17 m) in eastern Long Island Sound. Although residing in a high-energy tidal environment characterized by a net westward sediment flux, the large bedforms are relatively stable over the short term. Over a 7 month period, 55.1% of a total 2942 m of sand wave crestline lengths migrated less than the horizontal accuracy limits of navigation (2 m). Approximately 35% of the remaining sand wave crests migrated less than 4 m. Net migration of the sand wave crests in the study area was 0.2 m. In addition, the bulk form (center of area in profile view) or the base of the sand waves showed little, if any, movement. These data, in conjunction with flow data within the sand wave field, suggest that net migration rates are greater than the time span of this study and/or the sand waves move in response to large residual flows created by high-energy, aperiodic storm events. The latter scenerio suggests that day to day processes only serve to rework and modify the sand waves.

Marine Geology↗
USGS1990

Modern configuration of the southwest Florida carbonate slope: Development by shelf margin progradation

Depositional patterns and sedimentary processes influencing modern southwest Florida carbonate slope development have been identified based upon slope morphology, seismic facies and surface sediment characteristics. Three slope-parallel zones have been identified: (1) an upper slope progradational zone (100–500 m) characterized by seaward-trending progradational clinoforms and sediments rich in shelf-derived carbonate material, (2) a lower gullied slope zone (500–800 m) characterized by numerous gullies formed by the downslope transport of gravity flows, and (3) a base-of-slope zone (> 800 m) characterized by thin, lens-shaped gravity flow deposits and irregular topography interpreted to be the result of bottom currents and slope failure along the basal extensions of gullies. Modern slope development is interpreted to have been controlled by the offshelf transport of shallow-water material from the adjacent west Florida shelf, deposition of this material along a seaward advancing sediment front, and intermittent bypassing of the lower slope by sediments transported in the form of gravity flows via gullies. Sediments are transported offshelf by a combination of tides and the Loop Current, augmented by the passage of storm frontal systems. Winter storm fronts produce cold, dense, sediment-laden water that cascades offshelf beneath the strong, eastward flowing Florida Current. Sediments are eventually deposited in a relatively low energy transition zone between the Florida Current on the surface and a deep westward flowing counter current. The influence of the Florida Current is evident in the easternmost part of the study area as eastward prograding sediments form a sediment drift that is progressively burying the Pourtales Terrace. The modern southwest Florida slope has seismic reflection and sedimentological characteristics in common with slopes bordering both the non-rimmed west Florida margin and the rimmed platform of the northern Bahamas, and shows many similarities to the progradational Miocene section along the west Florida slope. As with rimmed platform slopes, development of non-rimmed platform slopes can be complex and controlled by a combination of processes that result in a variety of configurations. Consequently, the distinction between the two slope types based solely upon seismic and sedimentological characteristics may not be readily discernible.

Marine Geology↗
USGS1990

Sediment thickness in the southern Canada Basin

Multichannel seismic reflection data are used, in conjunction with deep crustal seismic refraction data, to estimate the thickness of sediments in the southern Canada Basin of the Arctic Ocean north of Alaska. The sediments are interpreted to be of Hauterivian (mid-Early Cretaceous) to Holocene age. Comparison of the seismic reflection character of seismic reflections in the study area with that in other basins indicates that a base-of-sediment—top of oceanic layer 2 reflection is not present above the depth at which the water-bottom multiple obscures all deeper arrivals, which is in conflict with the conclusions drawn from aeromagnetic, refraction, and other reflection studies. Seismic velocity structure, determined from the reflection data, indicates that the reflections above the multiple are from sedimentary strata. In the absence of seismic reflection evidence for the top of layer 2 above the multiple, we estimate total sediment thickness by using the layer 3 refractions and subtracting an average assumed layer 2 thickness from the top of layer 3. Assuming that an average thickness of oceanic layer 2 (1.4 km) overlies layer 3 in the southern Canada Basin, sediment thickness in the study area is estimated to range between 6.5 km where water depth is 3.8 km to greater than 11 km where the water depth is 2 km. This is nearly double that of any previous estimates and should have a significant effect on calculations such as the age of Canada Basin, regional heat flow, and long-term sedimentation rates.

Marine Geology↗
USGS1990

Bottom-boundary-layer measurements on the continental shelf off the Ebro River, Spain

Measurements of currents, waves and light transmission obtained with an instrumented bottom tripod (GEOPROBE) were used in conjunction with a theoretical bottom-boundary-layer model for waves and currents to investigate sediment transport on the continental shelf south of the Ebro River Delta, Spain. The current data show that over a 48-day period during the fall of 1984, the average transport at 1 m above the seabed was alongshelf and slightly offshore toward the south-southwest at about 2 cm/s. A weak storm passed through the region during this period and caused elevated wave and current speeds near the bed. The bottom-boundary-layer model predicted correspondingly higher combined wave and current bottom shear velocities at this time, but the GEOPROBE optical data indicate that little to no resuspension occurred. This result suggests that the fine-grained bottom sediment, which has a clay component of 80%, behaves cohesively and is more difficult to resuspend than noncohesive materials of similar size. Model computations also indicate that noncohesive very fine sand in shallow water (20 m deep) was resuspended and transported mainly as bedload during this storm. Fine-grained materials in shallow water that are resuspended and transported as suspended load into deeper water probably account for the slight increase in sediment concentration at the GEOPROBE sensors during the waning stages of the storm. The bottom-boundary-layer data suggest that the belt of fine-grained bottom sediment that extends along the shelf toward the southwest is deposited during prolonged periods of low energy and southwestward bottom flow. This pattern is augmented by enhanced resuspension and transport toward the southwest during storms.

Marine Geology↗
USGS1990

Distribution and dispersal of suspended particulate matter on the Ebro continental shelf, northwestern Mediterranean Sea

Hydrographic data, water and bottom-sediment samples, and a GEOPROBE tripod experiment were used to examine the distribution and dynamics of suspended particulate matter on the Ebro shelf in the northwestern Mediterranean Sea. In the absence of strong winds and storms, primary sediment supply from the Ebro River is dispersed along the shelf by a general southward flow. In such calm conditions, suspended-matter concentrations on the shelf are lower than 3 mg/l and transfer of material from the shelf to the slope takes place principally over the shelf edge north of the Columbretes Islands. Very fine sediment deposited in a mid-shelf mud belt (30–80 m deep) is cohesive and resistant to erosion. Only relatively rare, strong storms are able to resuspend particles from the deeper, central region of this cohesive deposit. When resuspension takes place, suspended-particulate-matter concentration increases and the general dispersal pattern of suspended matter is altered. Near the seafloor, distribution of suspended matter is greatly influenced by the distribution of the mid-shelf muds from which particles are resuspended. Resuspension occurs more intensively and frequently along the shallower (20–40 m) edge of the cohesive deposit and near the delta.

Marine Geology↗
USGS1990

Inorganic geochemistry of surface sediments of the Ebro shelf and slope, northwestern Mediterranean

Distributions of major, minor, and trace elements in surface sediment of the continental shelf and upper slope of the northeastern Spanish continental margin reflect the influences of discharge from the Ebro River and changes in eustatic sea levels. Multivariate factor analysis of sediment geochemistry was used to identify five groupings of samples (factors) on the shelf and slope. The first factor is an aluminosilicate factor that represents detrital clastic material. The second factor is a highly variable amount of excess SiO 2 and probably represents a quartz residuum originating from winnowing of relict detrital sediments. A carbonate factor (Factor 3) has no positive correlation with other geochemical parameters but is associated with the sand-size fraction. The carbonate in these sediments consists of a mixture of biogenic calcite and angular to subangular detrital grains. Organic carbon is associated with the aluminosilicate factor (Factor 1) but also factors out by itself (Factor 4); this suggests that there may be two sources of organic matter, terrestrial and marine. The fifth factor comprises upper slope sediments that contain high concentrations of manganese. The most likely explanation for these high manganese concentrations is precipitation of Mn oxyhydroxides at the interface between Mn-rich, oxygen-deficient, intermediate waters and oxygenated surface waters.

Marine Geology↗
USGS1990

Sedimentary evolution of the Pliocene and Pleistocene Ebro margin, northeastern Spain

The Pliocene and Pleistocene deposits of the Spanish Ebro margin overlie a regional unconformity and contain a major disconformity. These unconformities, named Reflector M and Reflector G, mark the bases of two seismic sequences. Except for close to the upper boundary where a few small channel deposits are recognized, the lower sequence lacks channels. The upper sequence contains nine channel-levee complexes as well as base-of-slope aprons that represent the proximal part of the Valencia turbidite system. Diverse geometries and variations in seismic units distinguish shelf, slope, base-of-slope and basin-floor facies. Four events characterize the late Miocene to Pleistocene evolution of the Ebro margin: (a) formation of a paleodrainage system and an extensive erosion-to-depositional surface during the latest Miocene (Messinian), (b) deposition of hemipelagic units during the early Pliocene, (c) development of canyons during the late Pliocene to early Pleistocene, and (d) deposition of slope wedges, channel-levee complexes, and base-of-slope aprons alternating with hemipelagic deposition during the Pleistocene. Sea-level fluctuations influenced the evolution of the sedimentary sequences of the Ebro margin, but the major control was the sediment supply from the Ebro River.

Marine Geology↗
USGS1990

Late Pleistocene and Holocene sedimentary facies on the Ebro continental shelf

Late Pleistocene—Holocene history of the Ebro continental shelf of northeastern Spain is recorded in two main sedimentary units: (1) a lower, transgressive unit that covers the shelf and is exposed on the outer shelf south of 40°40′N, and (2) an upper, progradational, prodeltaic unit that borders the Ebro Delta and extends southward along the inner shelf. The lower transgressive unit includes a large linear shoal found at a water depth of 90 m and hardground mounds at water depths of 70–80 m. Some patches of earlier Pleistocene prodelta mud remain also, exposed or covered by a thin veneer of transgressive sand on the northern outer shelf. This relict sand sheet is 2–3 m thick and contains 9000–12,500 yr old oyster and other shells at water depths of 78–88 m. The upper prodelta unit covers most of the inner shelf from water depths of 20–80 m and extends from the present Ebro River Delta to an area to the southwest where the unit progressively thins and narrows. Interpretation of high-resolution seismic reflection data shows the following facies occurring progressively offshore: (1) a thick stratified facies with thin progradational “foresets beds”, (2) a faintly laminated facies with sparse reflectors of low continuity, and (3) a thin transparent bottomset facies underlain by a prominent flat-lying reflector. Deposition in the northern half of the prodelta began as soon as the shoreline transgressed over the mid-shelf, but progradation of the southern half did not begin until about 1000–3000 yrs after the transgression. A classic deltaic progradational sequence is shown in the Ebro prodelta mud by (1) gradation of seismic facies away from the delta, (2) coarsening-upward sequences near the delta and fining-upward sequences in the distal mud belt deposits, and (3) thin storm-sand layers and shell lags in the nearshore stratified facies. The boundaries of the prodeltaic unit are controlled by increased current speeds on the outer shelf (where the shelf narrows) and by development of the shoreface sand body resulting from shoaling waves on the inner shelf.

Marine Geology↗
USGS1990

Geotechnical characteristics and slope stability on the Ebro margin, western Mediterranean

Sedimentological and geotechnical analyses of core samples from the Ebro continental slope define two distinct areas on the basis of sediment type, physical properties and geotechnical behavior. The first area is the upper slope area (water depths of 200–500 m), which consists of upper Pleistocene prodeltaic silty clay with a low water content (34% dry weight average), low plasticity, and high overconsolidation near the seafloor. The second area, the middle and lower slope (water depths greater than 500 m), contains clay- and silt-size hemipelagic deposits with a high water content (90% average), high plasticity, and a low to moderate degree of overconsolidation near the sediment surface. Results from geotechnical tests show that the upper slope has a relatively high degree of stability under relatively rapid (undrained) static loading conditions, compared with the middle and lower slopes, which have a higher degree of stability under long-term (drained) static loading conditions. Under cyclic loading, which occurs during earthquakes, the upper slope has a higher degree of stability than the middle and lower slopes. For the surface of the seafloor, calculated critical earthquake accelerations that can trigger slope failures range from 0.73 g on the upper slope to 0.23 g on the lower slope. Sediment buried well below the seafloor may have a critical acceleration as low as 0.09 g on the upper slope and 0.17 g on the lower slope. Seismically induced instability of most of the Ebro slope seems unlikely given that an earthquake shaking of at least intensity VI would be needed, and such strong intensities have never been recorded in the last 70 years. Other cyclic loading events, such as storms or internal waves, do not appear to be direct causes of instability at present. Infrequent, particularly strong earthquakes could cause landslides on the Ebro margin slope. The Columbretes slide on the southwestern Ebro margin may have been caused by intense earthquake shaking associated with volcanic emplacement of the Columbretes Islands. Localized sediment slides on steep canyon and levee slopes could have been caused by less intense shaking. In general, the slope is stable under present environmental loading conditions and is fundamentally constructional. Nevertheless, rapid progradation caused by high sedimentation rates and other processes acting during low sea-level periods, such as more intense wave loading near the shelfbreak, may have caused major instability in the past.

Marine Geology↗
USGS1990

Estimated post-Messinian sediment supply and sedimentation rates on the Ebro continental margin, Spain

Because of the extensive data base of seismic profiles, radiometric ages, and stratigraphic time markers such as the subaerial Messinian surface, sedimentation rates and Ebro River sediment discharge can be estimated for different periods and environments of the Ebro continental margin. New values for sediment discharge (i.e., 6.2 versus previous estimates of 2–3.5 million t/yr) for the Holocene highstand are more reliable but remain minimum estimates because a small proportion of Ebro sediment advected to the Balearic Rise and Abyssal Plain cannot be accounted for, especially during lowstands. The general highstand conditions of the Pliocene, which were similar to those of the Holocene, resulted in a low discharge of Ebro River sediment (ca. 6.5 million t/yr) and an even thickness of sediment across the margin that deposited at rates of about 24–40 cm/ky. In contrast, sediment supply increased two-three times during the Pleistocene, the margin prograded rapidly and deposition occurred at rates of 101–165 cm/ky on the outer shelf and slope, but basin floor rates remained anomalously low (21–26 cm/ky) because sediment was drained and broadly dispersed eastward in Valencia Trough. During the late Pleistocene rise of sea level, the main depocenters progressively shifted shoreward and sedimentation rates greatly decreased from 175 cm/ky on the upper slope during the early transgression to 106 cm/ky on the outer shelf and then to 63 cm/ky on the mid-shelf during the late transgression as the river sediment discharge dropped to half by Holocene time. Maximal sedimentation rates occurred in active depocenters of sediment dispersal such as the Holocene delta (370 cm/ky) or the youngest Pleistocene Oropesa channel-levee complex (705 cm/ky) where deposition rates increased by an order of magnitude or more compared to average Ebro shelf (38 cm/ky) or base-of-slope rates in the Pleistocene (21 cm/ky). The sedimentation rates verify the importance of sea-level control on the progressive change in location of depocenters and amount of sediment supply, but Pleistocene climatic change and deforestation alone can be observed to double river sediment discharge. The latter observation helps explain the anomalously high deposition rates in Pleistocene turbidite systems compared with older systems that may be controlled more by tectonic and sea-level changes alone. During the past 2000 years, in contrast, man has controlled deposition in the Ebro margin system, first by deforestation that more than doubled river sediment discharge and shelf deposition rates to equal those of Pleistocene time; and second by dam contruction that reduced sediment discharge to less than 5% of the normal Holocene discharge. Similar recent discharge reductions from the Nile and Rhone Rivers suggest that loss of the majority of the river sediment supply in the Mediterranean Sea may result in significant erosion of biologically and agriculturally important lobate delta areas.

Marine Geology↗
USGS1990

Factors controlling late Cenozoic continental margin growth from the Ebro Delta to the western Mediterranean deep sea

The Ebro continental margin sedimentation system originated with a Messinian fluvial system. This system eroded both a major subaerial canyon cutting the margin southeastward from the present Ebro Delta and an axial valley that drained northeastward down Valencia Trough. Post-Messinian submergence of this topography and the Pliocene regime of high sea levels resulted in a marine hemipelagic drape over the margin. Late Pliocene to Pleistocene glacial climatic cycles, drainagebasin deforestation, and sea-level lowstands combined to increase sediment supply, cause the margin to prograde, and create a regime of lowstand sediment-gravity flows in the deeper margin. The depositional patterns of regressive, transgressive and highstand sea-level regimes suggest that location of the sediment source near the present Ebro Delta throughout the late Cenozoic, southward current advection of sediment, and greater subsidence in the southern margin combined to cause generally asymmetric progradation of the margin to the southeast. Thicker, less stable deposits filling the Messinian subaerial canyon underwent multiple retrograde failures, eroded wide gullied canyons and formed unchanneled base-of-slope sediment aprons in the central margin area; other margin areas to the north and south developed a series of channel-levee complexes. On the basin floor, the formation of Valencia Valley over the Messinian subaerial valley and earlier faults led to draining of about 20% of the Ebro Pleistocene sediment from channel-levee complexes through the valley to prograde Valencia Fan as much as 500 km northeast of the margin. Thus, the Ebro margin has two growth directions, mainly southeastward during higher sea levels, and eastward to northeastward during lower sea levels. The northeastward draining of turbidity currents has produced unusually thin and widely dispersed turbidite systems compared to those on ponded basin floors. During the past few centuries, man's impact has exceeded natural controls on Ebro margin growth. Deforestation of the drainage basin more than doubled the normal Holocene sediment supply, and construction of dams then reduced the supply by 95%. This reduction of the past 50 years has caused erosion of the delta and contamination of bottom sediment because normal Holocene sediment discharge is not available to prograde the delta or help dilute pollutants.

Marine Geology↗
USGS1990

Coastal retreat and shoreface profile variations in the Canadian Beaufort Sea

The coastline of the southern Canadian Beaufort Sea consists primarily of unconsolidated bluffs. Although the sea is ice-free for 3 months of the year and wave energy is restricted by pack ice, the coast is undergoing regional retreat with erosion rates as high as 10 m a −1 in some locations. Simple and multiple regression analyses were carried out to determine the degree of correlation between the mean retreat rate measured at various locations and the different parameters that may control shoreline recession. Sediment texture, ground-ice content, cliff height, wave energy and shoreface gradient revealed medium to poor correlation with erosion rates, showing that the recessive evolution of the coastline can not be explained solely by wave-induced and subaerial processes. The comparison of nearshore echo-sounding records from 1987 with bathymetry from 1971 showed substantial erosion (up to 1 m) of the submarine profile between 12 and 15 m of water. There is strong evidence that this erosion has been caused by sea ice gouging on the seafloor. From depths of 5 to 9 m, accretion has taken place, possibly induced by ice-push processes, and inshore of the 5 m isobath wave and current erosion of the shoreface has occurred. These results suggest that the erosion of the inner shelf by ice gouging drives the erosion observed inshore on the coastal bluffs and nearshore zone as the shoreface profile strives for a state of dynamic equilibrium.

Marine Geology↗
USGS1990

Bulldozing and resuspension of shallow-shelf sediment by ice keels: Implications for Arctic sediment transport trajectories

The orientations and termination directions of newly formed ice gouges, identified in a 5-year study of two offshore corridors in eastern Harrison Bay, Alasaka, indicate a bimodal distribution of sediment transport directions: west-southwest and southeast, due to ice-keel bulldozing. The westerly sediment transport results from the dominant westward drift of sea ice and ocean currents, whereas the southeasterly transport results from episodic fall storms with winds from the northwest. Transport associated with ice gouging occurs by bulldozing and by resuspension during the bulldozing processes. Fine-grained (< 63 μ m) sediment transport may also involve transport of resuspended sediment by intensified currents found near the grounded floes, leaving behind a lag of coarser sediments. In Harrison Bay, about 6000 m 3 of sediment is reworked each year by ice gouging for every square kilometer of the seafloor between water depths of 5 and 18 m. Over 50% of this sediment is moved onshore to the southeast, whereas 35% is moved alongshore to the west. The actual distance of sediment transport is dependent upon the grain size of the seafloor sediment. Coarse-grained material (> 63 μ m) is bulldozed as far as 7 m in the direction of ice movement, whereas sediment finer than 63 μm may be transported by intensified bottom currents up to 80 times this distance.

Marine Geology↗
USGS1991

Rise and demise of the Bahama-Grand Banks gigaplatform, northern margin of the Jurassic proto-Atlantic seaway

An extinct, > 5000-km-long Jurassic carbonate platform and barrier reef system lies buried beneath the Atlantic continental shelf and slope of the United States. A revised stratigraphic framework, a series of regional isopach maps, and paleogeographic reconstructions are used to illustrate the 42-m.y. history of this Bahama-Grand Banks gigaplatform from its inception in Aalenian(?) (early Middle Jurassic) time to its demise and burial in Berriasian-Valanginian time (early Early Cretaceous). Aggradation-progradation rates for the gigaplatform are comparable to those of the familiar Capitan shelf margin (Permian) and are closely correlated with volumetric rates of siliciclastic sediment accumulation and depocenter migration. Siliciclastic encroachment behind the carbonate tracts appears to have been an important impetus for shelf-edge progradation. During the Early Cretaceous, sea-level changes combined with eutrophication (due to landward soil development and seaward upwelling) and the presence of cooler upwelled waters along the outer shelf appear to have decimated the carbonate producers from the Carolina Trough to the Grand Banks. This allowed advancing siliciclastic deltas to overrun the shelf edge despite a notable reduction in siliciclastic accumulation rates. However, upwelling did not extend southward to the Blake-Bahama megabank, so platform carbonate production proceeded there well into the Cretaceous. Subsequent stepwise carbonate abatement characterized the Blake Plateau Basin, whereas the Bahamas have maintained production to the present. The demise of carbonate production on the northern segments of the gigaplatform helped to escalate deep-water carbonate deposition in the Early Cretaceous, but the sudden augmentation of deep-water carbonate reservoirs in the Late Jurassic was triggered by other agents, such as global expansion of nannoplankton communities.

Marine Geology↗
USGS1991

Cenozoic prograding sequences of the Antarctic continental margin: a record of glacio-eustatic and tectonic events

Sedimentary sections up to 6-14 km thick lie beneath many areas of the Antarctic continental margin. The upper parts of the sections contain up to 6 km of Cenozoic glacial and possibly non-glacial sequences that have prograded the continental shelf up to 85 km. We describe the Cenozoic sequences using two general categories based on their acoustic geometries. Type IA sequences, which account for most prograding of the Antarctic continental shelf, have complex sigmoidal geometries and some acoustic characteristics atypical of low-latitude margins, such as troughs and mounds lying parallel and normal to the shelf edge and high velocities (2.0-2.6 km/s) for flat layers within 150 m of the seafloor. Type IIA sequences, which principally aggrade the paleoshelf, lie beneath type IA sequences and have mostly simple geometries and gently dipping reflections. The prograding sequences are commonly located near the seaward edges of major Mesozoic and older margin structures. Relatively rapid Cenozoic subsidence has occurred due to the probable rifting in the Ross Sea, thermal subsidence in the Antarctic Peninsula, and isostatic crustal flexure in Wilkes Land. In Prydz Bay and the Weddell Sea, prograding sequences cover Mesozoic basins that have undergone little apparent Cenozoic tectonism. Grounded ice sheets are viewed by us, and others, as the principal mechanism for depositing the Antarctic prograding sequences. During the initial advance of grounded ice the continental shelf is flexurally overdeepened, the inner shelf is heavily eroded, and gently dipping glacial strata are deposited on the shelf (i.e type IIA sequences). The overdeepened shelf profile is preserved (a) during glacial times, by grounded ice sheets episodically crossing the shelf, eroding sediments from onshore and inner shelf areas, and depositing sediments at the front of the ice sheet as outer shelf topset-banks and continental slope foreset-aprons (i.e. type IA sequences), and (b) during interglacial times, like today, by little or no clastic sedimentation on the continental shelf other than beneath retreated ice shelves lying far from the continental sheld edge. Ice streams carve broad depressions across the shelf and carry abundant basal sediments directly to the continental shelf edge, thereby creating troughmouth fans and sheet-like prograding sequences (i.e. type IA sequences). Numerous acoustic unconformities and multiple overcompacted layers within the prograding sequences suggest major fluctuations of the Antarctic Ice Sheet. The available drilling and seismic interpretations provide the following history: (1) Cenozoic ice sheets have existed in places near the continental shelf since middle to late Eocene time. (2) A grounded Antarctic ice sheet first expanded to the continental shelf edge, with probable overdeepening of the outer shelf, in late Eucene to early Oligocene time in Prydz Bay, possibly in early Miocene time in the Ross Sea, and at least by middle Miocene time in the Weddell Sea. (3) The relative amounts of shelf prograding and inferred ice-volume variations (and related sea-level changes) have increased since middle to late Miocene time in the eastern Ross Sea, Prydz Bay, and possibly Weddell Sea. Our analysis is preliminary. Further acoustic surveys and scientific drilling are needed to resolve the proximal Antarctic record of glacio-eustatic, climatic, and tectonic events recorded by the prograding sequences.

Marine Geology↗
USGS1991

Tidal resuspension of sediments in northern Chesapeake Bay

Tidal resuspension experiments were carried out on two occasions during the winter of 1988–1989 at a disposal site for hydraulically dredged sediments in northern Chesapeake Bay to determine the influence of tidal resuspension on erosion of recent deposits. The results indicate that normal tidal erosion depths were only a fraction of a millimeter per half tidal cycle and probably did not account for the majority of the apparent sediment loss. Erosion rate was found to be a linear function of the excess of estimated shear stress over a critical value, but both the constant of proportionality ( M = 0.5 mg/cm 2 /h) and the critical shear stress ( τ c = 0.16 dynes/cm 2 were much less than many previously reported results. The most likely explanation for these low values is that the thin layer of surface sediments involved in regular tidal resuspension had only a few hours at most to consolidate between resuspension events. Observed resuspended sediment concentrations (up to 35 mg/l above background levels) were much less than those reported for previous observations of tidal resuspension in the nearby channel, presumably due to greater stratification and lower tidal velocities at the disposal site. Salinity-induced stratification of the water column is estimated to have reduced shear stresses by up to 50% relative to the neutrally stratified case. Regular tidal resuspension of a thin layer of surface sediments is implicated as a potentially important aspect of the typical benthic environment of northern Chesapeake Bay, even if it is not the most important factor in massive sediment erosion and transport.

Marine Geology↗
USGS1991

Morphological development of the Florida Escarpment: Observations on the generation of time transgressive unconformities in carbonate terrains

An unconformity of 100 m.yr magnitude continues to form on the western edge of the Florida-Bahama Platform, near 26??N, where distal Mississippi Fan sediments are progressively burying the Florida Escarpment. Multiple perspectives of the developing unconformity's morphology are revealed using available technologies including GLORIA images of the entire platform's edge, Seabeam bathymetric contours, and Deep-Tow's high resolution side-scan data calibrated with bottom photographs. The structure and stratigraphy of the buried escarpment and the associated unconformity are resolved by airgun, sparker, and Deep-Tow's 4 kHz seismic reflection data; we summarize the morphological data on the exposed part of the unconformity and the sedimentary deposits accumulating in the basin above the unconformity. The exposed cliff face is composed of a staircase of bedding-plane terraces which are developed along joint planes. The terraces extend 100-1000 m along the escarpment's face, and the intervening vertical walls are up to 100 m high. The jointed morphology of this Mesozoic limestone cliff apparently reflects erosional exposure of its interior anatomy rather than its accretionary shape. The change in slope between the platform face and the abyssal plain is very abrupt. In places along the contact between the escarpment and fan sediments, reduced chemical-charged brine seeps occur, which locally cause carbonate dissolution and precipitation, sulfide mineralization, and the deposition of a fossiliferous and organic carbon-rich lens associated with chemosynthetic communities. These seep deposits and escarpment-derived megabreccias intercalate with basinal sediments that overlie the unconformity. Because surface seismic reflection data do not produce images of the escarpment's face that closely reflect the exposed escarpment's morphology, they must also be of limited value in characterizing the surface of similar steeply dipping buried escarpments. Thus, the downslope extent of the heavily eroded platform edge is unclear.

Florida↗