USGS Science⌕ Search

SEARCH · USGS Science

Results for “Industrial Minerals”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23Linked to original sources

International Organizations and Programs for Wildlife Conservation

Historically, private non-governmental entities in the developed world took interest in wildlife in developing nations. Nineteenth and early twentieth century explorers of Africa, Asia, and South America reported fascinating encounters with magnificent species that were previously cryptic or unknown (Robinson et al. 2017). Organizations such as the Royal Geographical Society in the United Kingdom, a sponsor of Charles Darwin’s expedition, the Boone and Crockett Club in North America, and numerous museums in the United States and Europe, sponsored chronicled expeditions to remote places under the goal of discovery and collection. Concurrent with the quest for discovery of wild places and species new to science was the drive to find and secure timber, mineral, energy, and other resources to fuel the growing demands of development brought on by the Industrial Revolution (Lucas 2009, Stearns 2013). This led to exploitation, and overexploitation, which led to growing concerns over the loss of species, including species not yet known to western science. During the latter half of the twentieth century, in response to these concerns, private non-governmental organizations formed to promote conservation through science, advocacy, and technical assistance. These organizations vary from working independently, to forming collaborations across the public and private sphere. Our objective in this chapter is to outline some of the major conventions, major organizations, and programs that promote engagement in wildlife conservation and management at the international level.

Book chapter↗

Subsurface stratigraphy and geochemistry of late Quaternary evaporites, Searles Lake, California, with a section on radiocarbon ages of stratigraphic units

Searles Lake is a dry salt pan, about 100 km 2 in area, that lies on the floor of Searles Valley, in the desert of southeast California. Several salt bodies of late Quaternary age lie beneath the surface, mostly composed of sodium and potassium carbonate, sulfate, chloride, and borate minerals. Mud layers separate the salt bodies, which contain interstitial brine that is the source of large quantities of industrial chemicals. The value of annual production from the deposit exceeds $30 million; total production to date exceeds $1 billion. The salts and muds were deposited during Pleistocene and Holocene times by a series of large lakes (200 m maximum depth, 1,000 km 2 maximum area) that fluctuated in size in response to climatic change. Salts were deposited during major dry (interpluvial) episodes, muds during wet (pluvial) episodes that correlate with glacial advances in other parts of North America and the world. Data based on cores from the deposit are used in this paper to establish the stratigraphy of the deposit, the chemical and mineral compositions of successive units, and the total quantities of components contained by them. These parameters are then used to determine the geochemical evolution of the sedimentary layers. The results provide a refined basis for reconstructing the limnology of Searles Lake and the regional climate during late Quaternary time. Six main stratigraphic units were distinguished and informally named earlier on the basis of their dominant composition: Unit Typical thickness 14C age, uncorrected (in meters) (years B.P.) Overburden Mud 7 0 to >3,500 Upper Salt 15 >3,500 to 10,500 Parting Mud 4 10,500 to 24,000 Lower Salt 12 24,000 to 32,500 Bottom Mud 30 32,500 to 130,000 Mixed Layer 200+ > 130,000 (The age of 130,000 years for the Mixed Layer is based on extrapolated sedimentation rates.) The Lower Salt is subdivided into seven salt units (S-l to S-7) and six mud units (M-2 to M-7), the Mixed Layer into six units (A to F). For each salt unit, the areal extent, volume, shape, mineralogy, and chemical composition of the solids and brines have been determined; for each mud unit (which originally extended over much of the basin), the shape and volume within a standard area, and the mineralogy, have been determined. The bulk compositions (brines plus salts) of the combined Lower Salt units S-l to S-5 and units S-6 and S-7, and the Upper Salt, were determined so that the total quantities and ratios of ions in the initial brines could be reconstructed. The 74 published HC dates on Searles Lake core samples from all but the oldest unit are supplemented by 14 new dates (determined by Minze Stuiver) on the Lower Salt. Most of the age control comes from dates based on disseminated organic carbon; two dates are on wood; dates on carbonate minerals are less reliable. Although the probable disequilibrium between the carbon in the lake and atmosphere (because of contamination, slow equilibrium rates, and other factors) causes disseminated carbon dates to be an estimated 500-2,500 years 'too old,' the ages of the major and minor units are relatively well established. The list above indicates rounded and uncorrected ages for the contacts of major units. The age of the only salt bed in the Lower Salt which indicates desiccation (S-5) is about 28,000 years. The average uncorrected sedimentation rate in the Parting Mud is 4

Professional Paper↗

Mineral resource of the month: pumice and pumicite

The article offers information on pumice, an important commodity for the construction, horticulture and abrasives industries. The commodity is described as an extremely light, highly porous extrusive volcanic rock which was formed due to the rapid cooling of air-pocketed lava. It is noted that the characteristics of pumice make it as an ideal aggregate material in lightweight building blocks in the U.S. and abroad. The leading countries in terms of pumice production are Greece and the U.S.

Earth↗

Western Mineral and Environmental Resources Science Center--providing comprehensive earth science for complex societal issues

Minerals in the environment and products manufactured from mineral materials are all around us and we use and come into contact with them every day. They impact our way of life and the health of all that lives. Minerals are critical to the Nation's economy and knowing where future mineral resources will come from is important for sustaining the Nation's economy and national security. The U.S. Geological Survey (USGS) Mineral Resources Program (MRP) provides scientific information for objective resource assessments and unbiased research results on mineral resource potential, production and consumption statistics, as well as environmental consequences of mining. The MRP conducts this research to provide information needed for land planners and decisionmakers about where mineral commodities are known and suspected in the earth's crust and about the environmental consequences of extracting those commodities. As part of the MRP scientists of the Western Mineral and Environmental Resources Science Center (WMERSC or 'Center' herein) coordinate the development of national, geologic, geochemical, geophysical, and mineral-resource databases and the migration of existing databases to standard models and formats that are available to both internal and external users. The unique expertise developed by Center scientists over many decades in response to mineral-resource-related issues is now in great demand to support applications such as public health research and remediation of environmental hazards that result from mining and mining-related activities. Western Mineral and Environmental Resources Science Center Results of WMERSC research provide timely and unbiased analyses of minerals and inorganic materials to (1) improve stewardship of public lands and resources; (2) support national and international economic and security policies; (3) sustain prosperity and improve our quality of life; and (4) protect and improve public health, safety, and environmental quality. The MRP supports approximately 40 USGS research specialists who utilize cooperative agreements with universities, industry, and other governmental agencies to support their collaborative research and information exchange. Scientists of the WMERSC study how and where non-fuel mineral resources form and are concentrated in the earth's crust, where mineral resources might be found in the future, and how mineral materials interact with the environment to affect human and ecosystem health. Natural systems (ecosystems) are complex - our understanding of how ecosystems operate requires collecting and synthesizing large amounts of geologic, geochemical, biologic, hydrologic, and meteorological information. Scientists in the Center strive to understand the interplay of various processes and how they affect the structure, composition, and health of ecosystems. Such understanding, which is then summarized in publicly available reports, is used to address and solve a wide variety of issues that are important to society and the economy. WMERSC scientists have extensive national and international experience in these scientific specialties and capabilities - they have collaborated with many Federal, State, and local agencies; with various private sector organizations; as well as with foreign countries and organizations. Nearly every scientific and societal challenge requires a different combination of scientific skills and capabilities. With their breadth of scientific specialties and capabilities, the scientists of the WMERSC can provide scientifically sound approaches to a wide range of societal challenges and issues. The following sections describe examples of important issues that have been addressed by scientists in the Center, the methods employed, and the relevant conclusions. New directions are inevitable as societal needs change over time. Scientists of the WMERSC have a diverse set of skills and capabilities and are proficient in the collection and integration of

Circular↗

Science data in support of environmental health studies in the U.S.-Mexico border region

The border region of the United States and Mexico encompasses a vast and diverse array of physical settings and habitats that include wetlands, deserts, rangeland, mountains, and forests, which are unique in terms of the diversity of their water, mineral, and biological resources. The region is interconnected economically, politically, and socially owing to its binational heritage. In 1995, nearly 11 million people lived immediately adjacent to the border. By one account, that population could more than double by 2020. This rapid population growth and consequent economic development and land-use changes are pushing the limits of environmental sustainability and quality. Infrastructure development has lagged behind the rapid growth of the region, resulting in a shortage of water for municipal, agricultural, and industrial uses. These stressors threaten the quality of life in the region and raise concerns about the interdependence of environmental quality and human health. To allow for continued economic growth while protecting the area’s natural resources and fostering a high quality of life, the United States and Mexico need an improved understanding of the threats posed by these anthropogenic changes. Issues of particular concern include (1) contaminants in ground water, surface water, and biota from agricultural, municipal, and industrial activities; (2) airborne pollutants from fossil-fuel combustion and other activities; (3) contaminants from past and present mining activities and mineral deposits; and (4) pathogens, pharmaceuticals, hormones, and other contaminants released in treated and untreated human and animal wastewaters.

Fact Sheet↗

Mineral Resources Data System (MRDS)

The U.S. Geological Survey (USGS) operates the Mineral Resources Data System (MRDS), a digital system that contained 111,955 records on Sept. 1, 1995. Records describe metallic and industrial commodity deposits, mines, prospects, and occurrences in the United States and selected other countries. These records have been created over the years by USGS commodity specialists and through cooperative agreements with geological surveys of U.S. States and other countries. This CD-ROM contains the complete MRDS data base, several subsets of it, and software to allow data retrieval and display. Data retrievals are made by using GSSEARCH, a program that is included on this CD-ROM. Retrievals are made by specifying fields or any combination of the fields that provide information on deposit name, location, commodity, deposit model type, geology, mineral production, reserves, and references. A tutorial is included. Retrieved records may be printed or written to a hard disk file in four different formats: ascii, fixed, comma delimited, and DBASE compatible.

Data Series↗

State summaries: Colorado

According to the Colorado Geological Survey (CGS), Colorado's mining industry enjoyed a record-breaking year in 2005. For the whole year, the total value of nonfuel minerals, coal and uranium produced in the state in 2005 amounted to $2.4 billion. The production value of $1.52 billion in the nonfuel sector broke the previous record of $1.3 billion set in 1980, and is 60% higher than the revised 2004 CGS estimate of $950.5 million. The United States Geological Survey (USGS) ranked Colorado ninth among the states in nonfuel mineral value, up from 17th in 2004. About $1 billion of the nonfuel total is from metal mining. New record-high productions were achieved not only for molybdenum but also for coal and goal.

Mining Engineering↗

Geology of Wisconsin: Survey of 1873-1879, Volume I

The leading purpose df this volume was determined by the following enactment, being section 1, chapter 121, of the Laws of 1876. " The people of the State of Wisconsin, represented in Senate and Assembly, do enact as follows: Section 1. That in the preparation of his final report, the chief geologist be, and he is hereby authorized to collate the general geology and the leading facts and principles relating to the material resources of the State, together with practical suggestions as to the methods of detecting and utilizing the same, so as to constitute the material for a volume suited to the wants of explorers, miners, land owners, and manufacturers, who use crude native products, and to the needs of the schools of the State, and the masses of intelligent people who are not familiar with the principles of geology; said volume to be written in clear, plain language, with explanations of technical terms, and to be properly illustrated with maps and diagrams, and to be so arranged as to constitute a key to the more perfect understanding of the whole report." To subserve the purposes thus legally defined, the volume will be found to consist of three distinct portions; Part I, embracing the General Geology of the State, with explanatory matter; Part II, consisting of lists of the minerals, rocks and life-products of the State, with descriptions and auxiliary discussions; and Part III, embracing industrial descriptions and practical suggestions with reference to the leading natural resources of the State.

Wisconsin↗

Lithium

The lithium industry can be divided into two sectors: ore concentrate producers and chemical producers. Ore concentrate producers mine lithium minerals. They beneficiate the ores to produce material for use in ceramics and glass manufacturing.

Mining Engineering↗

Mineral of the month: aluminum

Aluminum is the second most abundant metallic element in Earth’s crust after silicon. Even so, it is a comparatively new industrial metal that has been produced in commercial quantities for little more than 100 years. Aluminum is lightweight, ductile, malleable and corrosion resistant, and is a good conductor of heat and electricity. Weighing about one-third as much as steel or copper per unit of volume, aluminum is used more than any other metal except iron. Aluminum can be fabricated into desired forms and shapes by every major metalworking technique to add to its versatility.

Geotimes↗

Mineral Resource of the Month: Niobium

Niobium, also called columbium, is a transition metal with a very high melting point. It is in greatest demand in industrialized countries, like the United States, because of its defense-related uses in the aerospace, energy and transportation industries. Niobium is used mostly to make high-strength, low-alloy (HSLA) steel and stainless steel. HSLA steels are used in large-diameter pipes for oil and natural gas pipelines and automobile wheels.

Earth↗

Methodology and technical input for the 2025 U.S. List of Critical Minerals—Assessing the potential effects of mineral commodity supply chain disruptions on the U.S. economy

The Secretary of the Interior, acting through the Director of the U.S. Geological Survey, is tasked by section 7002 (“Mineral Security”) of title VII (“Critical Minerals”) of the Energy Act of 2020 (Public Law 116–260, December 27, 2020, 116th Congress) with reviewing and revising the methodology used to evaluate mineral commodity supply risk and the U.S. List of Critical Minerals (LCM) no less than every 3 years. Following two previous LCM assessments, this analysis represents the latest technical input for evaluating each mineral commodity’s supply risk and determining their recommended status on the LCM. We evaluated mineral commodity supply risk using two criteria: (1) an economic effects assessment that quantified the potential effects of various trade disruption scenarios on the U.S. economy, and (2) an examination of whether the mineral commodity’s U.S. supply chain relied on a sole domestic producer that represented a single point of failure. For the first criterion, postdisruption equilibrium quantities and prices for each mineral commodity were calculated based on their price elasticities of supply and demand and the availability of excess production capacity for each yearlong foreign trade disruption scenario. Subsequently, a nonlinear optimization routine was used with detailed economic input-output tables to estimate the potential economic effects on the U.S. economy of over 1,200 scenarios for 84 mineral commodities. After accounting for the probability of each scenario’s occurrence, the overall results are presented in terms of changes in U.S. gross domestic product (GDP) by individual industry and the economy overall. The results, which ranged from a net decrease in U.S. GDP of nearly $4.5 billion to a net increase of $33 million, largely reflect U.S. import dependency and world production concentration. Using the Jenks natural breaks optimization method, a statistical classification technique, we categorized the mineral commodities into several classes based on this overall risk quantification. Mineral commodities with annualized probability-weighted net decreases in U.S. GDP greater than $2 million were recommended for inclusion on the LCM. If a mineral commodity did not meet the threshold for inclusion on the LCM under the first criterion, its domestic supply chain was examined under the second criterion, which recommended a mineral commodity for inclusion on the LCM if there was only a single domestic producer. Ultimately, the two criteria resulted in the recommendation of the addition of six mineral commodities (in descending risk order, potash, silicon, copper, silver, rhenium, and lead) to and the removal of two mineral commodities (arsenic and tellurium) from the LCM. By using an economic effects assessment, the results of this analysis provide a prioritization that can also be compared directly against other risk analyses and the cost of various risk mitigation strategies.

Open-File Report↗

Core Research Center

The Core Research Center (CRC) of the U.S. Geological Survey (USGS), located at the Denver Federal Center in Lakewood, Colo., currently houses rock core from more than 8,500 boreholes representing about 1.7 million feet of rock core from 35 States and cuttings from 54,000 boreholes representing 238 million feet of drilling in 28 States. Although most of the boreholes are located in the Rocky Mountain region, the geologic and geographic diversity of samples have helped the CRC become one of the largest and most heavily used public core repositories in the United States. Many of the boreholes represented in the collection were drilled for energy and mineral exploration, and many of the cores and cuttings were donated to the CRC by private companies in these industries. Some cores and cuttings were collected by the USGS along with other government agencies. Approximately one-half of the cores are slabbed and photographed. More than 18,000 thin sections and a large volume of analytical data from the cores and cuttings are also accessible. A growing collection of digital images of the cores are also becoming available on the CRC Web site Internet http://geology.cr.usgs.gov/crc/.

General Information Product↗

Iron sulfide minerals at Cement oil field, Oklahoma: Implications for magnetic detection of oil fields

Aeromagnetic anomalies at Cement oil field (Anadarko basin, Oklahoma) have been attributed to authigenic magnetite. The following characteristics of the magnetite, however, indicate that it is contamination introduced by drilling: (1) occurrence as sharp angular blades and as spheres, commonly with metallographic textures typical of industrial alloys and with associated steel and wustite (FeO); (2) presence only in well cuttings and absence from core and quarry samples; and (3) lack of association with detrital framework grains or with authigenic carbonate and sulfide minerals. Ferrimagnetic pyrrhotite occurs in well cuttings, cores, and quarry samples at Cement and is a possible natural source of the magnetic anomalies. Pyrrhotite, which is intergrown with more abundant FeS 2 minerals, formed as a result of hydrocarbon seepage. Pyrrhotite is confined to beds above oil and gas reservoirs. These beds, which lack detrital organic matter, contain higher mineral sulfide and lower mineral sulfate sulfur (1.7 and 0.1 wt %, respectively) than do correlative beds off the field (0.2 and 1.1 wt %, respectively). In the field, isotopic values of sulfide S show a systematic decrease upward through the Permian section from positive values (maximum, +12 per mil at ∼610-760 m depth) to negative values (-1 to -11 per mil between 32 and 230 m; -26 to -30 per mil at the surface). Geochemical results, together with time-temperature data derived from burial curves, limit the major sources of the sulfide in the Fe-S minerals to two possibilities. Isotopically heavy sulfide was generated either inorganically at temperatures >∼90 °C in beds beneath Permian beds, or by bacterial sulfate reduction at temperatures <∼60 °C in Permian strata. If the latter, microbial sulfate reduction occurred under sulfate-limited conditions. The isotopically light sulfide occurring in minerals near the present surface is attributed to bacterial reduction of sulfate. Sulfate-reducing bacteria derived metabolic energy from leaking hydrocarbons and associated organic compounds.

Oklahoma↗

USGS research on energy resources, 1986; program and abstracts

The extended abstracts in this volume are summaries of the papers presented orally and as posters in the second V. E. McKelvey Forum on Mineral and Energy Resources, entitled "USGS Research on Energy Resources-1986." The Forum has been established to improve communication between the USGS and the earth science community by presenting the results of current USGS research on nonrenewable resources in a timely fashion and by providing an opportunity for individuals from other organizations to meet informally with USGS scientists and managers. It is our hope that the McKelvey Forum will help to make USGS programs more responsive to the needs of the earth science community, particularly the mining and petroleum industries, and Win foster closer cooperation between organizations and individuals. The Forum was named after former Director Vincent E. McKelvey in recognition of his lifelong contributions to research, development, and administration in mineral and energy resources, as a scientist, as Chief Geologist, and as Director of the U.S. Geological Survey. The Forum will be an annual event, and its subject matter will alternate between mineral and energy resources. We expect that the format will change somewhat from year to year as various approaches are tried, but its primary purpose will remain the same: to encourage direct communication between USGS scientists and the representatives of other earth-science related organizations. Energy programs of the USGS include oil and gas, coal, geothermal, uranium-thorium, and oil shale; work in these programs spans the national domain, including surveys of the offshore Exclusive Economic Zone. The topics selected for presentation at this McKelvey Forum represent an overview of the scientific breadth of USGS research on energy resources. They include aspects of petroleum occurrence in Eastern United States rift basins, the origin of magnetic anomalies over oil fields, accreted terranes and energy-resource implications, coal quality, geothermal energy sources, integrated geology and chemistry in uranium-deposit studies, and interpretations of sea-floor geology seen in reconnaissance-scale sidescan-sonar mosaics of the Gulf of Mexico and west coast Exclusive Economic Zone. Data are presented that are being used in building models of geothermal energy settings, basin histories, and the occurrence of energy resources. In addition to the technical sessions presenting the results of USGS research, each congressionally mandated USGS Mineral Resource Program has a display outlining plans and progress. We are all excited about this continuing opportunity to disseminate and discuss our research with our colleagues in industry and academia, and we welcome your suggestions on improving this series of Forums.

Circular↗

A methodology to assess the historical environmental footprint of in-situ recovery (ISR) of uranium: A demonstration in the Goliad Sand in the Texas Coastal Plain, USA

In-situ recovery (ISR) has been the only technique used to extract uranium from sandstone-hosted uranium deposits in the Pliocene Goliad Sand in the Texas Coastal Plain. Water plays a crucial role throughout the ISR lifecycle of production and groundwater restoration yet neither the water use nor other environmental footprints have been well documented. The goal of this study is to examine historical records for all six ISR operations completed in the Goliad Sand to identify and quantify parameters that indicate the surface and aquifer disturbances, water use, and radon emissions. Overall, the average mine area was 0.00023 ± 0.00006 acres per pound (ac/lb) U 3 O 8 . The average mine pore volume was 48.9 ± 50 gal/lb U 3 O 8 with a minimum affected aquifer volume of 0.51 ± 0.08 cubic feet per pound (cu ft/lb) U 3 O 8. An average of 258 ± 40 gallons (gal) of fluid were disposed per pound (lb) U 3 O 8 , with an average of 169 ± 26 gal/lb U 3 O 8 attributed to restoration and 89 ± 36 gal/lb U 3 O 8 attributed to the uranium production phase. The average radon emitted was 1.06 × 10 −3 ± 7.4 × 10 −4 curies per pound (Ci/lb) U 3 O 8 . Goodness-of-fit ( R 2 ) values are ≥0.79 for linear regressions of the amount of uranium produced versus mine area, mine pore volumes, mine aquifer volumes, water pumped, and total water disposed. The R 2 value for radon emitted was 0.68. However, the water disposed only during the uranium production phase is more strongly correlated to the number of production days ( R 2 = 0.96) than to uranium production ( R 2 = 0.84), whereas the volume of water disposed during restoration is more strongly correlated to the “pore volume” ( R 2 = 0.97) than to uranium production ( R 2 = 0.90). Pore volume is an industry term used to describe the amount of fluid circulated through the aquifer during the uranium production period and stipulated in bond agreements in order to satisfy groundwater restoration requirements. Models constructed in this study can be used to estimate probable water use and the extent of surface and aquifer disturbances associated with ISR-amenable undiscovered uranium resources in the Goliad Sand. The historical perspective offered by the data compiled and correlations may prove useful to both industry and regulators.

Texas↗

Swatara Creek basin of southeastern Pennsylvania: An evaluation of its hydrologic system

Local concentrations of population in the Swatara Creek basin of Pennsylvania find it necessary to store, transport, and treat water because local supplies are either deficient or have been contaminated by disposal of wastes in upstream areas. Water in the basin is available for the deficient areas and for dilution of the coal-mine drainage in the northern parts and the sewage wastes in the southern parts. Swatara Creek drains 576 square miles just east of Harrisburg, Pa., and is the largest tributary to the Susquehanna River from the north side below Harrisburg. It rises in the southern Pocono Mountains and flows southwestward across the Lebanon Plateau. On an average day Swatara Creek discharges more than 630 million gallons into the Susquehanna River at Middletown, Pa. In a year this amounts to about 23 inches of water over the entire basin and is the residual from an average annual precipitation of 45.5 inches. During an average year the flow in Swatara Creek from the upper third of the basin above Harper Tavern is always greater than 1,300 mgd (million gallons per day) for at least 15 days and is always greater than 25 mgd for at least 350 days. The daily streamflow from the basin averages 1.1 mgd per sq mi, but yields from different areas range from 0.97 to 1.22 mgd per sq mi. These variations are caused chiefly by differences in precipitation and land cover. The area of lowest yield is in the valleys west of Tremont, and the highest yields are in the Upper and Lower Little Swatara Creek subbasins. At high and medium stages the chemical character of the water in the streams is suitable for public and private supplies. At lower stages, defending on the areas and the amounts of contamination by coal-mine drainage and sewage pollution, the natural flow may require some treatment. At low stages the chemical characteristics of the natural flow not affected by man is almost identical with that of the ground water in the area drained by the stream. In general, the total dissolved solids range from about 25 to 400 parts per million and the hardness is as much as about 300 parts per million. The ground-water increment to the base flow of Swatara Creek averages about 240 mgd, or about 8.8 inches annually, for the basin. Generally, ground-water supplies in amounts of less than 0.5 mgd can be developed south of Blue Mountain. Supplies of several million gallons per day have been developed for industrial use from the permeable limestones in the south-central part of the basin. More intensive investigation in other parts of the basin would indicate areas where supplies of more than 0.5 mgd could be developed from properly spaced wells. The chemical character of water from wells depends largely on the host rock. In highly soluble rocks water contains large amount of dissolved solids; in more resistant rocks concentrations are lower. The chemical character of unpolluted ground water generally reflects the composition of the more readily soluble minerals in the local geologic environment. Areas contaminated by septic- tank effluent may have above normal amounts of nitrate and detergent products. Except where polluted, most ground water is suitable for public and industrial uses without extensive treatment. Sites for storage of surface water exist in the part of the basin lying in the valley and ridge area. As much as 30 to 40 percent of the annual flow could be impounded for release as low-flow augmentation for dilution of mine drainage and other wastes in the basin. Low sediment yields of supplying drainage areas would ensure a long life expectancy of reservoirs at these sites. Overbank flooding of the main stem of the Swatara Creek and its tributaries has occurred many times in the past. However, it has not been a hazard because urban development has not encroached on the flood plain. An inundation map of the August 1933 flood provides a basis that urban planners may use to avoid future damage. As water in the Swatara Creek moves downstream to the Susquehanna River, the flow is influenced consecutively by a large annual rainfall on the northern valley and ridge area, the wastes of surface and subsurface coal-mining activities, and less annual rainfall on the part of the basin lying in the Lebanon Plateau area; the flow is supplemented and further influenced by many tributaries and by the industrial and domestic wastes that are carried by these secondary streams. The annual precipitation ranges from 52 inches at the east edge and 49 inches at the west edge of the mountainous part of the basin to about 41 inches at the southwestern part at Middletown. The rainfall generally is adequate during the growing season to mature the crops. The mean annual temperature at Lebanon is about 52&deg;F, and the growing season is about 180 days. In this report the basin has been divided into eight hydrologic zones, leased on runoff, natural use of water, and chemical character of water. Four zones lie in the valley and ridge area, three lie in the Lebanon Plateau area, and one lies in the highland along the southeastern basin boundary. In each of the zones the hydrologic characteristics are virtually the same, but they may be completely different from those in adjacent zones. The boundaries of the zones generally coincide with boundaries between geologic formations, and the areas in each zone include rocks of similar influence on water. Streams in zone 4 at the northeast edge of the plateau have the highest average surface runoff from 1.2 to 1.1 mgd per sq mi whereas those in zone 2 at the northwest edge of the valley and ridge area have the lowest, about 1.0 mgd. Streams in zone 8, along the southeast edge of the basin, have the largest sustained low-flow yield, about 0.26 to 0.19 mgd per sq mi; those in zone 5 overlying the Martinsburg Shale east of Harrisburg have the smallest sustained low-flow yields, 0.03 to 0.01 mgd. Streams in the limestone area of zone 7 have the greatest range in low-flow yields in any one zone from 0.60 to 0 mgd per sq mi. Low-flow yields in zones 1 through 4 range from 0.13 to 0.03 mgd per sq mi. Surface flows from zones 1 and 2 are generally acidic and contain high concentrations of sulfate, iron, and total dissolved solids especially where contaminated with mine wastes. Surface flows from zones 3 and 4 are dilute, slightly alkaline, and suitable for public water supplies. Surface flows from zones 5, 6, and 7 are alkaline and contain moderate concentrations of dissolved solids with waters of highest hardness occurring in zone 7. Surface flows from zone 8 are dilute to moderately mineralized and are relatively high in silica concentration. Nitrate concentrations are high in surf Fee flows below sewage outfalls and in ground water contaminated by septic tank effluent and industrial wastes. Average annual sediment yields of 550 to 650 tons per square mile are characteristic of zones 1 and 2 where strip mining has destroyed the forest cover and coal culm is carried into the streams. From agricultural lands on the Martinsburg Shale in zones 5 and 6, annual sediment yields range from 300 to 350 tons per square mile; but from agricultural lands on the siliceous rocks in zone 8 and zones 3 and 4 in the valley and ridge area, the sediment yield ranges from 200 to 250 tons annually per square mile. Lowest annual sediment yields in the basin are in the forested areas of siliceous rocks in zones 2, 3, 4, and 5, and in the sinkhole topography of the limestones in zone 7 where the yield ranges from 30 to 35 tons and 50 to 60 tons per square mile, respectively. The amount of ground water that can be developed in the basin is dependent on the ability of the underlying rocks to yield water to wells. More than 300 gpm (gallons per minute) can be obtained from wells in alluvial materials in the valley bottoms and in some of the limestones where large solution channels and fractures are penetrated by the wells. From 50 to 300 gpm can be obtained from wells in loosely cemented sandstones and in fractured limestones. From 10 to 50 gpm can be developed from wells in the shales and harder sandstones. The most dense rocks will yield from 1 to 10 gpm from fractures and crevices. Most wells yield water from the upper 350 feet of the formation, for this part contains the most fractures or solution channels. Studies show that the velocity at which a contaminant will move downstream in the basin is related to the discharge of the stream at the time. At a stream discharge of about 400 mgd at Pine Grove, a contaminant in Swatara Creek would require about 40 hours to move from Pine Grove to Middletown. As a result of dispersion and dilution, the maximum concentration of the contaminant at Middletown would be less than 20 percent the concentration at Pine Grove under these conditions. An evaluation of the availability of water in the basin indicates that about I,239 mgd enters as precipitation, 630 mgd leaves as streamflow, 580 mgd is evaporated and transpired, and 56 mgd is diverted for use by man. Not all the diversions for man's use are lost to the basin, as about 27 mgd is returned as sewage for reuse. About one-fourth of the waste water is returned to the ground and the remainder to stream drainageways. Of that diverted by man, 11.6 mgd is used for public supply and 44.4 mgd for industrial and private supplies. Diversions of streamflow furnish 86 percent of the public supply and 27 percent of the industrial supply, and ground-water sources yield the remainder. Municipal and private sewage treatment plants are upgrading the waste water in many places, but no provisions are being made for treatment other than natural dilution and assimilation for the 15 mgd of coal-nine drainage in the northern part of the basin. Technology for economic treatment of mine water is not available at this time, although research in this field is being done. Urbanization eastward from Harrisburg and around Lebanon has increased the population density of the basin. Densities of 500 people per square mile and water use exceeding 2.0 mgd per sq mi can be expected in the future. By the year 2000 the population of the basin may increase 60 percent; and if the per capita rate of use increases 0.5 percent per year the domestic requirements for water will be about two times the present use, or 23 mgd. Similarly, if the present 1:4 ratio of domestic use to industrial use of water continues, at least 89 mgd will be needed for industry in the future. Although an increase to twice the present use of water can be foreseen, or 112 mgd, water for the dilution and assimilation of wastes from treatment systems are not included. Providing water for dilution of wastes from treatment plants has not been a problem, but in the future the amounts needed for this purpose will be greater as the population increases. As water becomes more valuable, treatment of sewage wastes to reduce the biochemical-oxygen-demand load by at least 80 to 90 percent will be necessary to conserve water for more productive uses. As much as 100 mgd may be needed for waste dilution in the basin by year 2000. The present trends in suburban and light industrial development will probably persist in the basin. Problems arising through changes in economic value of water, conflicts in use, and alternatives in development are typical of those confronting the manager of a water-resource system.

Pennsylvania↗

Remote sensing inventory and geospatial analysis of brick kilns and clay quarrying in Kabul, Afghanistan

Reconstruction and urban development in Kabul, Afghanistan, has prompted vast expansion of the clay quarrying and brick making industry. This study identified the extent and distribution of clay quarrying and brick kilns in the greater Kabul area between 1965 and 2018. Very high-resolution satellite imagery was interpreted to quantify and characterize the type, number, and location of brick kilns for 1965, 2004, 2011, and 2018. Geospatial analysis of kilns together with geologic data and the results of hyperspectral image analysis yielded information regarding the extent of relevant mineral resources. Finally, kernel density analysis of kiln locations for each date called attention to their shifting spatial distribution. The study found that the clay quarrying and brick making industry has expanded exponentially. The type of kilns has transitioned from artisanal style clamp kilns to small-scale Bull’s Trench Kilns (BTK), and ultimately to Fixed Chimney Bull’s Trench Kilns (FCBTK). While quarrying has occurred entirely within quaternary windblown loess and clay deposits, artisanal clamp kilns were located in fine sediments containing montmorillonite and FCBTKs have developed in sediments containing calcite and muscovite. The study’s inventory of kilns was then used to estimate kiln workforce at 27,500 workers and production at 1.579 billion bricks per year.

Kabul↗