USGS Science⌕ Search

SEARCH · USGS Science

Results for “Field Guides”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23Linked to original sources
USGS1998

Survival of female northern pintails wintering in southwestern Louisiana

The North American breeding population of northern pintails ( Anas acuta ) has reached previously unprecedented low numbers 4 times since 1983. Because pintails show high fidelity to wintering areas, regional survival estimates and identification of factors influencing survival are needed to guide management of wintering pintails. We used radiotelemetry to estimate survival rates of female pintails wintering in southwestern Louisiana. We tested for variation in survival and hunting mortality rates in relation to age (immature or adult), winter (1990-91, 1991-92, 1992-93), time period (prehunting season, first hunting season, time between split hunting seasons, second hunting season, posthunting season), body condition (body mass when released, adjusted for body size), and region (southwestern Louisiana or elsewhere on the Texas-Louisiana Gulf Coast or Mississippi Alluvial Valley). Within southwestern Louisiana, the 147-day (5 Oct-28 Feb) survival rate of adults (0.714 ± 0.045; x̅ ± SE) was greater ( P = 0.02) than that of immatures (0.550 ± 0.068), primarily because immatures had higher hunting mortality. Female survival was lower ( P s < 0.01) during hunting than during nonhunting seasons but did not differ between first and second hunting seasons ( P = 0.58) or among non-hunting seasons ( P s >0.25). Survival did not differ in relation to winter or condition ( P s > 0.12). Hunting mortality did not differ ( P s > 0.13) in relation to winter, condition, or region, but hunting mortality of immatures (0.287 ± 0.046) was greater ( P < 0.001) than that of adults (0.130 ± 0.025). Despite conservative hunting regulations (30-day seasons and 1 pintail daily), hunting mortality rates of pintails in southwestern Louisiana were high. Pintails in southwestern Louisiana rely on a small number of key refuges for protection but feed almost exclusively in privately owned agricultural fields. If increased winter survival of female pintails in southwestern Louisiana is desired, we recommend that managers increase food available.

Louisiana↗
USGS2020

SurfRCaT: A tool for remote calibration of pre-existing coastal cameras to enable their use as quantitative coastal monitoring tools

The Surf-camera Remote Calibration Tool (SurfRCaT) is a Python-based software application to calibrate and rectify images from pre-existing video cameras that are operating at coastal sites in the United States. The software enables remote camera calibration and subsequent image rectification by facilitating the remote-extraction of ground control points using airborne lidar observations, and guides the user through the entire process. No programming or code interaction are necessary to use the software. Calibration parameters and subsequent rectified image products derived from the software are saved locally. Users can apply SurfRCaT to any camera imagery that has stationary structures within the camera’s field of view. Given current recreational camera infrastructure, SurfRCaT could increase the number of potential quantitative coastal video monitoring stations in the United States by an order of magnitude.

SoftwareX↗
USGS1976

Trace elements in some rocks and slag from the Yemen Arab Republic and their bearing on the iron ore near Sa'dah

Thirty-seven samples of rocks, saprolite, laterite, gossan, and slag were collected in the Yemen Arab Republic during June-July 1975 when field work was conducted to refine an interpretation of the regional geology made from LANDSAT-1 images by M. J. Grolier. These samples we reanalyzed in the laboratories of the U. S. Geological Survey, and the results were interpreted for use in programs of economic development as a guide for the evaluation of mineral resources in the Yemen Arab Republic. The work was undertaken as part of the program of the U. S. Agency for International Development with the cooperation of the Mineral and Petroleum Authority, Ministry of Economy, Yemen Arab Republic.

Open-File Report↗
USGS2014

Climate-smart conservation: putting adaption principles into practice

Climate change already is having significant impacts on the nation’s species and ecosystems, and these effects are projected to increase considerably over time. As a result, climate change is now a primary lens through which conservation and natural resource management must be viewed. How should we prepare for and respond to the impacts of climate change on wildlife and their habitats? What should we be doing differently in light of these climatic shifts, and what actions continue to make sense? Climate-Smart Conservation: Putting Adaptation Principles into Practice offers guidance for designing and carrying out conservation in the face of a rapidly changing climate. Addressing the growing threats brought about or accentuated by rapid climate change requires a fundamental shift in the practice of natural resource management and conservation. Traditionally, conservationists have focused their efforts on protecting and managing systems to maintain their current state, or to restore degraded systems back to a historical state regarded as more desirable. Conservation planners and practitioners will need to adopt forward-looking goals and implement strategies specifically designed to prepare for and adjust to current and future climatic changes, and the associated impacts on natural systems and human communities—an emerging discipline known as climate change adaptation. The field of climate change adaptation is still in its infancy. Although there is increasing attention focused on the subject, much of the guidance developed to date has been general in nature, concentrating on high-level principles rather than specific actions. It is against this backdrop that this guide was prepared as a means for helping put adaptation principles into practice, and for moving adaptation from planning to action.

Report↗
USGS2008

View_SPECPR: Software for plotting spectra (installation manual and user's guide, version 1.2)

This document describes procedures for installing and using the 'View_SPECPR' software system to plot spectra stored in SPECPR (SPECtrum Processing Routines) files. The View_SPECPR software is comprised of programs written in IDL (Interactive Data Language) that run within the ENVI (ENvironment for Visualizing Images) image processing system. SPECPR files are used by earth-remote-sensing scientists and planetary scientists for storing spectra collected by laboratory, field, and remote sensing instruments. A widely distributed SPECPR file is the U.S. Geological Survey (USGS) spectral library that contains thousands of spectra of minerals, vegetation, and man-made materials (Clark and others, 2007). SPECPR files contain reflectance data and associated wavelength and spectral resolution data, as well as meta-data on the time and date of collection and spectrometer settings. Furthermore, the SPECPR file automatically tracks changes to data records through its 'history' fields. For more details on the format and content of SPECPR files, see Clark (1993). For more details on ENVI, see ITT (2008). This program has been updated using an ENVI 4.5/IDL7.0 full license operating on a Windows XP operating system and requires the installation of the iTools components of IDL7.0; however, this program should work with full licenses on UNIX/LINUX systems. This software has not been tested with ENVI licenses on Windows Vista or Apple Operating Systems.

Open-File Report↗
USGS2026

Field methods, quality-assurance, and data management plan for water-quality activities and water-level measurements, Idaho National Laboratory, Idaho

Introduction Water-quality activities and water-level measurements conducted by the U.S. Geological Survey (USGS) Idaho National Laboratory (INL) Project Office coincide with the USGS mission of evaluating the quantity and quality of the Nation’s water resources. The activities are conducted in cooperation with the U.S. Department of Energy’s (DOE) Idaho Operations Office. Results of water-quality and hydraulic head research efforts are presented in various USGS and scientific journal publications (refer to Fisher, 2022). These data are stored internally in the Aquarius Time Series and Aquarius Samples databases and are publicly accessible through National Water Quality Monitoring Council (2025) and U.S. Geological Survey (2025). Data collected from our studies are used by researchers, Federal and State agencies, water management and regulatory organizations, as well as the public. This quality assurance plan (QAP) describes the methods and processes for field methods, data collection, data management, data auditing, and equipment management for both the water-quality and water-level programs at the USGS INL Project Office (hereto referred to as INL Project Office). A comprehensive quality assurance (QA) plan ensures that the processes defined in this document will guide the program staff to collect and publish reliable, useful, and defensible data products for stakeholders. This QAP supersedes previous versions of this document and is intended to complement the Quality Assurance and Data Management (QADM) Plan for the Idaho Water Science Center (IDWSC; Christopher Mebane and Lauren Zinsser, written commun., 2024).

Idaho↗
USGS1988

Borehole geophysics applied to ground-water investigations

The purpose of this manual is to provide hydrologists, geologists, and others who have the necessary training with the basic information needed to apply the most useful borehole-geophysical-logging techniques to the solution of problems in ground-water hydrology. Geophysical logs can provide information on the construction of wells and on the character of the rocks and fluids penetrated by those wells, in addition to changes in the character of these factors with time. The response of well logs is caused by: petrophysical factors; the quality; temperature, and pressure of interstitial fluids; and ground-water flow. Qualitative and quantitative analysis of the analog records and computer analysis of digitized logs are used to derive geohydrologic information. This information can then be extrapolated vertically within a well and laterally to other wells using logs. The physical principles by which the mechanical and electronic components of a logging system measure properties of rocks, fluids and wells, and the principles of measurement need to be understood to correctly interpret geophysical logs. Planning the logging operation involves selecting the equipment and the logs most likely to provide the needed information. Information on well construction and geohydrology are needed to guide this selection. Quality control of logs is an important responsibility of both the equipment operator and log analyst and requires both calibration and well-site standardization of equipment. Logging techniques that are widely used in ground-water hydrology or that have significant potential for application to this field include: spontaneous potential, resistance, resistivity, gamma, gamma spectrometry, gamma-gamma, neutron, acoustic velocity, acoustic televiewer, caliper, and fluid temperature, conductivity, and flow. The following topics are discussed for each of these techniques: principles and instrumentation, calibration and standardization, volume of investigation, extraneous effects, and interpretation and applications.

Open-File Report↗
USGS1971

Preliminary tectonic map of the Arabian Peninsula

In 1963, in response to a request from the Ministry of Petroleum and Mineral Resources, the Saudi Arabian Government and the U. S. Geological Survey, U. S. Department of the Interior, with the approval of the U. S. Department of State, undertook a joint and cooperative effort to map and evaluate the mineral potential of central and western Saudi Arabia. The results of this program are being released in USGS open files in the United States and are also available in the Library of the Ministry of Petroleum and Mineral Resources. Also on open file in that office is a large amount of material, in the form of unpublished manuscripts, maps, field notes, drill logs, annotated aerial photographs, etc., that has resulted from other previous geologic work by Saudi Arabian government agencies. The Government of Saudi Arabia makes this information available to interested persons, and has set up a liberal mining code which is included in "Mineral Resources of Saudi Arabia, a Guide for Investment and Development," published in 1965 as Bulletin 1 of the Ministry of Petroleum and Mineral Resources, Directorate General of Mineral Resources, Jiddah, Saudi Arabia.

Open-File Report↗
USGS1972

Report of the field trip, February 24 to April 2, 1965 in part of the northeastern Hijaz quadrangle, Saudi Arabia

In 1963, in response to a request from the Ministry of Petroleum and Mineral Resources, the Saudi Arabian Government and the U. S. Geological Survey, U. S. Department of the Interior, with the approval of the U. S. Department of State undertook a joint and cooperative effort to map and evaluate the mineral potential of central and Saudi Arabia. The results of this program are being released in USGS open files in the United States and are also available in the Library of the Ministry of Petroleum and Mineral Resources. Also on open file in that office is a large amount of material, in the form of unpublished manuscripts, maps, field notes, drill logs, annotated aerial photographs, etc., that has resulted from other previous geologic work by Saudi Arabian government agencies. The Government of Saudi Arabia makes this information available to interested persons, and has set up a liberal mining coda which is included in "Mineral Resources of Saudi Arabia, a Guide for Investment and Development," published in 1965 as Bulletin 1 of the Ministry of Petroleum and Mineral Resources, Directorate General of Mineral Resources, Jiddah, Saudi Arabia.

Hijaz quadrangle↗
USGS1990

Borehole geophysics applied to ground-water investigations

The purpose of this manual is to provide hydrologists, geologists, and others who have the necessary background in hydrogeology with the basic information needed to apply the most useful borehole-geophysical-logging techniques to the solution of problems in ground-water hydrology. Geophysical logs can provide information on the construction of wells and on the character of the rocks and fluids penetrated by those wells, as well as on changes in the character of these factors over time. The response of well logs is caused by petrophysical factors, by the quality, temperature, and pressure of interstitial fluids, and by ground-water flow. Qualitative and quantitative analysis of analog records and computer analysis of digitized logs are used to derive geohydrologic information. This information can then be extrapolated vertically within a well and laterally to other wells using logs. The physical principles by which the mechanical and electronic components of a logging system measure properties of rocks, fluids, and wells, as well as the principles of measurement, must be understood if geophysical logs are to be interpreted correctly. Plating a logging operation involves selecting the equipment and the logs most likely to provide the needed information. Information on well construction and geohydrology is needed to guide this selection. Quality control of logs is an important responsibility of both the equipment operator and the log analyst and requires both calibration and well-site standardization of equipment. Logging techniques that are widely used in ground-water hydrology or that have significant potential for application to this field include spontaneous potential, resistance, resistivity, gamma, gamma spectrometry, gamma-gamma, neutron, acoustic velocity, acoustic televiewer, caliper, and fluid temperature, conductivity, and flow. The following topics are discussed for each of these techniques: principles and instrumentation, calibration and standardization, volume of investigation, extraneous effects, and interpretation and applications.

Techniques of Water-Resources Investigations↗
USGS2023

Rapid surface rupture mapping from satellite data: The 2023 Kahramanmaraş, Turkey (Türkiye), earthquake sequence

The 6 February 2023 Kahramanmaraş, Turkey (Türkiye), earthquake sequence produced > 500 km of surface rupture primarily on the left‐lateral East Anatolian (~345 km) and Çardak (~175 km) faults. Constraining the length and magnitude of surface displacement on the causative faults is critical for loss estimates, recovery efforts, rapid identification of impacted infrastructure, and fault displacement hazard analysis. To support these efforts, we rapidly mapped the surface rupture from satellite data with support from remote sensing and field teams, and released the results to the public in near‐real time. Detailed surface rupture mapping commenced on 7 February and continued as high‐resolution (< 1.0 m/pixel) optical images from WorldView satellites (2023 Maxar) became available. We interpreted the initial simplified rupture trace from subpixel offset fields derived from Advanced Land Observation Satellite2 and Sentinel‐1A synthetic aperture radar image pairs available on 8 and 10 February, respectively. The mapping was released publicly on 10 February, with frequent updates, and published in final form four months postearthquake ( Reitman, Briggs, et al. , 2023 ). This publicly available, rapid mapping helped guide fieldwork and constrained U.S. Geological Survey finite‐fault and loss estimate models, as well as stress change estimates and dynamic rupture models.

Kahramanmaraş↗
USGS2024

Geophysical identification of potential groundwater – surface water interactions in the Bonita Peak Mining District, San Juan County, Colorado

This report includes the results and interpretation of geophysical investigations to aid in the location, identification, and conceptual site model (CSM) development of the near surface groundwater and surface water hydrology of the Upper Cement Creek and California Gulch of the Animas Rivers within the Bonita Peak Mining Districts (BPMD). Mine influenced water (MIW) from numerous mine adits within the BPMD has altered the geochemistry and ecology of these ground and surface waters. Many studies of varying scales have investigated the geology, hydrogeology, geochemistry, and aqueous chemistry of these adits and impacted areas. Field investigations using non-invasive geophysical methods were conducted in the summer of 2019 to aid in identifying potential groundwater inputs to these streams and further the CSM of the near surface within and along these streams. Two field deployments were completed in August and September of 2019. In August 2019, Phase 1 was completed using multifrequency electromagnetic induction (EMI) and thermal infrared imaging (TIR) to measure the bulk electrical conductivity, magnetic susceptibility, and the temperature response at known and suspected groundwater seeps into the Upper Cement Creek and California Gulch stretches of these alpine streams. Results and interpretation from Phase 1 were used to co-locate stretches of these streams for further detailed fiber optic distributed temperature system (FODTS) monitoring of the temperature dynamics for submeter identification of potential groundwater seeps during Phase 2. Phase 2 included additional EMI measurements, FODTS measurements, and repeated some Phase 1 measurements for improved data quality. All these data were used for the combined qualitative interpretation identifying seep locations. The data from both Phase 1 and Phase 2 are available in the USGS data release at: https://www.sciencebase.gov/catalog/item/5f18a30082cef313ed84879b. These data include detailed near-surface electrical conductivity and magnetic susceptibility mapping, discrete TIR imaging, and several kilometers of FODTS data. These data were georeferenced and used to identify potential groundwater seeps into these streams. The results indicate a complex near surface geophysical and hydrogeologic regime. Seeps are classified and spatially correlated to the EMI, TIR, and geochemical sampling results. This report is a thorough compilation of the geophysical field efforts in the summer of 2019, the data processing, and interpretations of these data. These data alone should not be used for final interpretations of the complex hydrogeology within these alpine systems. Rather, these data should be combined with other known data from various investigations to further refine the CSM and guide decisions for future investigations, watershed protective measures, and other site decisions. Geographical information system (GIS) layers of these results are available to project managers for such integration and combined interpretations.

Colorado↗
USGS2025

Mobile radar provides insights into hydrologic responses in burn areas

Background Wildfires often occur in mountainous terrain, regions that pose substantial challenges to operational meteorological and hydrologic observing networks. Aims A mobile, post-fire hydrometeorological observatory comprising remote-sensing and in situ instrumentation was developed and deployed in a burnt area to provide unique insights into rainfall-induced post-fire hazards. Methods Mobile radar-based rainfall estimates were produced throughout the burn area at 75-m resolution and compared with rain gauge accumulations and basin response variables. Key results The mobile radar was capable of resolving details in intra-basin rain fields as well as detecting storms approaching the burn area with accuracy equivalent to rain gauges. Runoff responses were complex and dependent on spatiotemporal patterns and magnitude of rainfall intensity over the burn area. Conclusions The complement of the mobile radar with the near-field, non-contact instruments measuring the hydrologic response provided valuable information in regions that are difficult to access and are not routinely monitored by conventional observing networks. Implications Post-fire observatories equipped with mobile radars deployed on burn areas provide real-time data, early alerting capabilities and visualizations to potentially guide impact-based decision support for local authorities.

Colorado↗
USGS1996

Low-velocity fault-zone guided waves: Numerical investigations of trapping efficiency

Recent observations have shown that shear waves trapped within low-velocity fault zones may be the most sensitive measure of fault-zone structure (Li et al. , 1994a, 1994b). Finite-difference simulations demonstrate the effects of several types of complexity on observations of fault-zone trapped waves. Overlying sediments with a thickness more than one or two fault-zone widths and fault-zone step-overs more than one or two fault widths disrupt the wave guide. Fault kinks and changes in fault-zone width with depth leave readily observable trapped waves. We also demonstrate the effects of decreased trapped wave excitation with increasing hypocentral offset from the fault and the effects of varying the contrast between the velocity in the fault zone and surrounding hard rock. Careful field studies may provide dramatic improvements in our knowledge of fault-zone structure.

Bulletin of the Seismological Society of America↗
USGS1905

The Fairhaven gold placers, Seward Peninsula, Alaska

This manuscript is based on a geologic and topographic reconnaissance survey, made during the summer of 1903, of an important placer-gold district in the northeastern part of Seward Peninsula. The report is accompanied by a reconnaissance map by Mr. D. C. Witherspoon, topographer, under whose directions the field operations were carried out. Surveys were begun in Seward Peninsula in 1899, soon after the discovery of the rich placers of Nome, and, in view of the great economic importance of the field, have been extended as rapidly as the appropriations permitted. It was early recognized that here, as elsewhere in Alaska, it would be better to obtain general topographic and geologic results, to be immediately available to the mining public, than to attempt exhaustive surveys and studies of small areas. This has been the guiding policy in formulating and executing the plans. As a result, there have been issued a number of publications (including reconnaissance maps) which, though only of a preliminary character, have been, because of their timeliness, of much value to the mining public. With the appearance of the following report this first epoch in the surveys will have closed, for there will be available complete reconnaissance reports and maps of the entire Seward Peninsula. These general reports and maps should be followed by more detailed surveys; these have been begun, and it is purposed to carry them forward as rapidly as circumstances will permit. In taking up areas for detailed investigations the attempt will be made to study first those of greatest economic interest.

Alaska↗
USGS2017

Evidence of absence (v2.0) software user guide

Evidence of Absence software (EoA) is a user-friendly software application for estimating bird and bat fatalities at wind farms and for designing search protocols. The software is particularly useful in addressing whether the number of fatalities is below a given threshold and what search parameters are needed to give assurance that thresholds were not exceeded. The software also includes tools (1) for estimating carcass persistence distributions and searcher efficiency parameters (𝑝 and 𝑘 ) from field trials, (2) for projecting future mortality based on past monitoring data, and (3) for exploring the potential consequences of various choices in the design of long-term incidental take permits for protected species. The software was designed specifically for cases where tolerance for mortality is low and carcass counts are small or even 0, but the tools also may be used for mortality estimates when carcass counts are large.

Data Series↗
USGS2012

Since “Groundwater and surface water–A single resource”: some U.S. Geological Survey advances in modeling groundwater/surface-water interactions

Field and interpretive studies conducted by T.C. Winter and U.S. Geological Survey colleagues, and summarized in the 1998 publication “Groundwater and Surface Water – A Single Resource”, inspired a new generation of research centered on extensions of the groundwater-flow code MODFLOW to more sophisticated simulation of coupled groundwater and surface-water systems. Guided by emerging concerns with water availability, safe yields from wells, health of aquatic habitat, and climate change, the changes to MODFLOW involve: 1) the ability to more precisely and accurately represent the interface between surface and subsurface flows and 2) the consideration of a variety of mechanisms that influence their interaction. A review of the most important changes to the code is supplemented in this article by selected case studies in an effort to show the scope of the advances. The updates discussed include the Streamflow Routing (SFR), Lake (LAK), and Unsaturated-Zone Flow (UZF) Packages in MODFLOW-2005 and the Groundwater Management (GWM), Local Grid Refinement (LGR), and Newton (NWT) formulation versions of MODFLOW-2005. New developments feature the integration of rainfall-runoff modeling with MODFLOW in GSFLOW, coupling of GFLOW and MODFLOW in a hybrid code, and the forthcoming unstructured grid version of MODFLOW. They promise continued advances in the ability to use science to protect the single water resource.

Acque Sotterranee: Italian Journal of Groundwater↗
USGS1997

Stream Stability and Scour Assessments at Bridges in Massachusetts

In 1989, the Federal Highway Administration mandated that every state establish a program to evaluate the vulnerability to floods of all bridges over water. The Massachusetts Highway Department entered into a cooperative effort with the U.S. Geological Survey to comply with this mandate. Geomorphic and hydraulic characteristics were collected and were used to assess the processes that affect stream stability and current scour problems and potential near 2,361 bridge sites in Massachusetts. As a result of these assessments, the Massachusetts Highway Department will prioritize the bridge inventory for action regarding scour safety. A data base was prepared that includes the geomorphic and hydraulic data collected during field assessments. In addition to the data base, this report includes the historical development of the bridge scour program, the methods used for data collection during assessments, the methods used for quality assurance and quality control, and how the data base was digitally formatted to be presented on a CD-ROM. A user's guide provides assistance in the use of this electronic data base and report.

Open-File Report↗