USGS Science⌕ Search

SEARCH · USGS Science

Results for “Exploration Geophysics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23Linked to original sources
USGS1983

Selected physical properties of rocks from the Baid al Jimalah West tungsten deposit, Kingdom of Saudi Arabia, and recommendations for geophysical surveys

Bulk density and magnetic susceptibility of 11 outcrop samples representing the Proterozoic lithologic units at the Baid al Jimalah West tungsten deposit, Kingdom of Saudi Arabia were measured. Induced polarization response, apparent resistivity, and electromagnetic conductivity were determined for four specimens of the sample suite. Measurements show that there is a negative density contrast of about -0.17 g-cm^-3 between metasedimentary rocks of the Murdama group and the Bald al Jimalah graaite and that this contrast decreases with increasing mineralization of the granite. Similarly, the bulk magnetic susceptibility of the granite is about one-third that of the Murdama rocks for this sample suite; however, magnetic susceptibility increases with increasing mineralization in the granite specimens. Electromagnetic conductivities are uniformly low, in part because the specimens are weathered, but probably also because intense silicification accompanies the mineralization. Induced polarization chargeability increases in the granitic specimens with increasing mineralization and reflects higher percentages of sulfide minerals. Chargeability for the mineralized rocks is about four times higher than for the Murdama host rocks, and apparent resistivity values are about one-fifth the values of host rocks. Based on these results, it is recommended that during reconnaissance exploration of the area 15 detailed high-precision gravity profiles at 10 m to 50 m station spacing and eight induced polarization dipole-dipole profiles at 25 m dipole spacing and maximum 'n' of 6 be measured. To help define subsurface structure, a high-precision, ground-magnetic survey (map at 2-gamma contour interval) and a four-channel gamma ray spectrometric survey on a 25x50 m grid covering the area of the profiles are recommended.

Open-File Report↗
USGS2014

DigitalCrust – a 4D data system of material properties for transforming research on crustal fluid flow

Fluid circulation in the Earth's crust plays an essential role in surface, near surface, and deep crustal processes. Flow pathways are driven by hydraulic gradients but controlled by material permeability, which varies over many orders of magnitude and changes over time. Although millions of measurements of crustal properties have been made, including geophysical imaging and borehole tests, this vast amount of data and information has not been integrated into a comprehensive knowledge system. A community data infrastructure is needed to improve data access, enable large-scale synthetic analyses, and support representations of the subsurface in Earth system models. Here, we describe the motivation, vision, challenges, and an action plan for a community-governed, four-dimensional data system of the Earth's crustal structure, composition, and material properties from the surface down to the brittle–ductile transition. Such a system must not only be sufficiently flexible to support inquiries in many different domains of Earth science, but it must also be focused on characterizing the physical crustal properties of permeability and porosity, which have not yet been synthesized at a large scale. The DigitalCrust is envisioned as an interactive virtual exploration laboratory where models can be calibrated with empirical data and alternative hypotheses can be tested at a range of spatial scales. It must also support a community process for compiling and harmonizing models into regional syntheses of crustal properties. Sustained peer review from multiple disciplines will allow constant refinement in the ability of the system to inform science questions and societal challenges and to function as a dynamic library of our knowledge of Earth's crust.

Geofluids↗
USGS2006

Progress made in groundwater flow and transport modeling

A special session, “Automated Parameter Identification and Sensitivity Analysis in Groundwater Flow and Transport,” was held at the Spring AGU meeting last May to explore recent scientific and technological developments in this expanding research area. The problems and approaches discussed are crucial to any field of Earth science in which models are used to represent physical processes and simulated values are compared with measured quantities. Although methods for automated parameter identification and sensitivity analysis were first developed at about the same time as numerical groundwater models, they are rarely used. Presentations at this special session clearly demonstrated the potential contributions of these methods for more insightful groundwater model development and calibration.

Eos, Transactions, American Geophysical Union↗
USGS1986

On the nature of persistence in dendrochronologic records with implications for hydrology

Hydrologic processes are generally held to be persistent and not secularly independent. Impetus for this view was given by Hurst in his work which dealt with properties of the rescaled range of many types of long geophysical records, in particular dendrochronologic records, in addition to hydrologic records. Mandelbrot introduced an infinite memory stationary process, the fractional Gaussian noise process (F), as an explanation for Hurst's observations. This is in contrast to other explanations which have been predicated on the implicit non-stationarity of the process underlying the construction of the records. In this work, we introduce a stationary finite memory process which arises naturally from a physical concept and show that it can accommodate the persistence structures observed for dendrochronological records more successfully than an F or any other of a family of related processes examined herein. Further, some question arises as to the empirical plausibility of an F process. Dendrochronologic records are used because they are widely held to be surrogates for records of average hydrologic phenomena and the length of these records allows one to explore questions of stochastic process structure which cannot be explored with great validity in the case of generally much shorter hydrologic records.

Journal of Hydrology↗
USGS2015

GIS-Based Identification of Areas with Mineral Resource Potential for Six Selected Deposit Groups, Bureau of Land Management Central Yukon Planning Area, Alaska

This study, covering the Bureau of Land Management (BLM) Central Yukon Planning Area (CYPA), Alaska, was prepared to aid BLM mineral resource management planning. Estimated mineral resource potential and certainty are mapped for six selected mineral deposit groups: (1) rare earth element (REE) deposits associated with peralkaline to carbonatitic intrusive igneous rocks, (2) placer and paleoplacer gold, (3) platinum group element (PGE) deposits associated with mafic and ultramafic intrusive igneous rocks, (4) carbonate-hosted copper deposits, (5) sandstone uranium deposits, and (6) tin-tungsten-molybdenum-fluorspar deposits associated with specialized granites. These six deposit groups include most of the strategic and critical elements of greatest interest in current exploration. This study has used a data-driven, geographic information system (GIS)-based method for evaluating the mineral resource potential across the large region of the CYPA. This method systematically and simultaneously analyzes geoscience data from multiple geospatially referenced datasets and uses individual subwatersheds (12-digit hydrologic unit codes or HUCs) as the spatial unit of classification. The final map output indicates an estimated potential (high, medium, low) for a given mineral deposit group and indicates the certainty (high, medium, low) of that estimate for any given subwatershed (HUC). Accompanying tables describe the data layers used in each analysis, the values assigned for specific analysis parameters, and the relative weighting of each data layer that contributes to the estimated potential and certainty determinations. Core datasets used include the U.S. Geological Survey (USGS) Alaska Geochemical Database (AGDB2), the Alaska Division of Geologic and Geophysical Surveys Web-based geochemical database, data from an anticipated USGS geologic map of Alaska, and the USGS Alaska Resource Data File. Map plates accompanying this report illustrate the mineral prospectivity for the six deposit groups across the CYPA and estimates of mineral resource potential. There are numerous areas, some of them large, rated with high potential for one or more of the selected deposit groups within the CYPA.

Alaska↗
USGS1981

Map showing mineral-resource potential of the King Range and Chemise Mountain Instant Study Areas, Humboldt and Mendocino counties, California

The potential for economic development of energy-related or metallic mineral resources in the King Range and Chemise Mountain Instant Study Areas is low to moderate as indicated by geologic, geophysical, and geochemical investigations. No oil or gas seeps or coal seams were detected within the King Range or Chemise Mountain Study Area. The low porosity and permeability of the Franciscan sandstones that underlie these areas indicate a very low potential for oil or gas. The geothermal resource potential of these areas also is low. Minor manganese resources occur adjacent to the southeast corner of the King Range Instant Study Area near Queen Peak. The manganese forms small stratabound deposits associated with radiolarian chert and pillow basalt. The known deposits are too small and the manganese too low in concentration for further economic exploitation. Similar manganese mineralization may be within the belt of melange in the southeast corner of the King Range area and within the Chemise Mountain Instant Study Area, but economic deposits are unlikely. Although there has been historical base- and precious-metal exploration activity north of the King Range in the Mattole River drainage, our geologic and geochemical field data indicate almost no gold potential and low potentials for lead, zinc, copper, and silver. During this investigation, one high-grade vein and several minor veins containing lead, zinc, copper, and silver were discovered at Point Delgada immediately south of the King Range Instant Study Area. The vein mineralization is Miocene and cuts Cretaceous basalt flows, dikes, flow breccia, and younger overlying sedimentary rocks of the King Range. The vein mineralization at Point Delgada could be remobilized from more extensive unexposed stratabound base-metal mineralization at depth. Traces of lead and zinc detected within the King Range Instant Study Area may have similar stratabound or vein origins, but no resource potential is indicated. Minor copper mineralization with associated lead, zinc, and manganese anomalies within the Chemise Mountain Instant Study Area is of low economic potential because of the shearing, isolation, and lenticularity of the basaltic and cherty rocks within the melange mineralization.

California↗
USGS2011

Volcanology curricula development aided by online educational resource

Volcanic activity is an excellent hook for engaging college and university students in geoscience classes. An increasing number of Internet-accessible real-time and near–real time volcano monitoring data are now available and constitute an important resource for geoscience education; however, relatively few data sets are comprehensive, and many lack background information to aid in interpretation. In response to the need for organized, accessible, and well-documented volcano education resources, the U.S. Geological Survey's Hawaiian Volcano Observatory (HVO), in collaboration with NASA and the University of Hawai`i at Manoa, established the Volcanoes Exploration Project: Pu`u `Ō`ō (VEPP). The VEPP Web site (http://vepp.wr.usgs.gov) is an educational resource that provides access, in near real time, to geodetic, seismic, and geologic data from the active Pu`u `Ō`ō eruptive vent on Kilauea volcano, Hawaii, along with background and context information. A strength of the VEPP site is the common theme of the Pu`u `Ō`ō eruption, which allows the site to be revisited multiple times to demonstrate different principles and integrate many aspects of volcanology.

Hawai'i↗
USGS2020

Modelling marsh-forest boundary transgression in response to storms and sea-level rise

The lateral extent and vertical stability of salt marshes experiencing rising sea levels depend on interacting drivers and feedbacks with potential for non‐linear behaviors. A two‐dimensional transect model was developed to examine changes in marsh and upland forest lateral extent and to explore controls on marsh inland transgression. Model behavior demonstrates limited and abrupt forest retreat with long‐term upland boundary migration rates controlled by slope, sea level rise (SLR), high water events and biotic‐abiotic interactions. For low to moderate upland slopes the landward marsh edge is controlled by the interaction of these inundation events and forest recovery resulting in punctuated transgressive events. As SLR rates increase, the importance of the timing and frequency of water level deviations diminishes, and migration rates revert back to a slope‐SLR dominated process.

Geophysical Research Letters↗
USGS2026

Ice sheet dynamics drive pronounced changes in the subsurface freshwater-saltwater interface

Saltwater is migrating into freshwater aquifers globally with water quality and biogeochemical implications, yet saltwater intrusion in glaciated regions is sparsely investigated. Field observations suggest that groundwater head in glaciated systems is influenced by ice sheet forcings and provides evidence that seawater infiltrated into offshore aquifers during past deglaciation events. To understand links between ice sheet dynamics, groundwater head, and saltwater intrusion, we use numerical models to explore the effects of deglaciation on nearshore head and salinity distributions. We find that ice sheet thinning diminishes groundwater head, and the resulting shift in subsurface pressure gradients drives rapid landward movement of the subsurface freshwater-saltwater interface up to 4.0 km or 1.3 m per m ice sheet loss. Results highlight an overlooked saltwater intrusion mechanism that aligns with field observations and affects glaciated coastlines undergoing ice sheet retreat, underscoring the need to consider this mechanism in studies of contemporary coastal water quality.

Geophysical Research Letters↗
USGS2017

Crustal structure interpreted from magnetic anomalies

In this review, we discuss publications during the last quadrennium (1987–1990) that used aeromagnetic data, marine magnetic data, satellite magnetic data, and rock magnetic and petrologic data to provide information on the sources of magnetic anomalies. Abstracts and papers by non‐U.S. authors are not described. The publications reviewed reflect increased integration of rock magnetic property and petrologic studies with magnetic anomaly interpretation studies, particularly in deep crustal magnetization, exploration for hydrocarbons, and inversion of marine magnetic anomalies. Interpretations of aeromagnetic data featuring image display techniques and using the horizontal gradient method for locating magnetization boundaries became standard. The magnetic anomaly map of North America appeared, the first such map of an entire continent. MAGSAT data contributed to the development of a new model for the magnetization of the oceanic crust. Forward modeling of sources of magnetic anomalies contributed to a wide range of geologic investigations on land, and inverse magnetic modeling techniques became popular for marine geologic investigations.

Reviews of Geophysics↗
USGS2025

Detection of landslide-generated tsunami by shipborne GNSS precise point positioning

Precise point positioning (PPP) of ships using Global Navigation Satellite System (GNSS) data reveals the precise movements of marine vessels. This method may quantify anomalies in sea surface height with implications for oceanographic monitoring, exploration, and tsunami warning. The GNSS PPP data from the R/V Sikuliaq , a research ship of the University of Alaska Fairbanks, were processed to detect a small local tsunami generated by the Lowell Point landslide, which occurred near Seward, Alaska, on 8 May 2022 (UTC). The GNSS receiver aboard the R/V Sikuliaq recorded the waves generated by the landslide, with a maximum wave amplitude of 6 cm and wave periods between 40 and 50 s. These results are consistent with simulations of the landslide event.

Alaska↗
USGS2003

Archive of Boomer and Chirp Seismic Reflection Data Collected During USGS Cruise 01RCE02, Southern Louisiana, April and May 2001

In April and May of 2001, the U.S. Geological Survey conducted a geophysical study of the Mississippi River Delta, Atchafalaya River Delta, and Shell Island Pass in southern Louisiana. This study was part of a larger USGS River Contaminant Evaluation (RCE) Project. This disc serves as an archive of unprocessed digital seismic reflection data, trackline navigation files, shotpoint navigation maps, observers' logbooks, GIS information, and formal Federal Geographic Data Committee (FGDC) metadata. In addition, a filtered and gained digital GIF-formatted image of each seismic profile is provided. For your convenience, a list of acronyms and abbreviations frequently used in this report has also been provided. This DVD (Digital Versatile Disc) document is readable on any computing platform that has standard DVD driver software installed. Documentation on this DVD was produced using Hyper Text Markup Language (HTML) utilized by the World Wide Web (WWW) and allows the user to access the information by using a web browser (i.e. Netscape or Internet Explorer). To access the information contained on this disc, open the file 'index.htm' located at the top level of the disc using your web browser. This report also contains WWW links to USGS collaborators and other agencies. These links are only accessible if access to the internet is available while viewing the DVD. The archived boomer and chirp seismic reflection data are in standard Society of Exploration Geophysicists (SEG) SEG-Y format (Barry et al., 1975) and may be downloaded for processing with public domain software such as Seismic Unix (SU), currently located at http://www.cwp.mines.edu/cwpcodes. Examples of SU processing scripts are provided in the boom.tar and chirp.tar files located in the SU subfolder of the SOFTWARE folder located at the top level of this DVD. In-house (USGS) DOS and Microsoft Windows compatible software for viewing SEG-Y headers - DUMPSEGY.EXE (Zilhman, 1992) - is provided in the USGS subfolder of the SOFTWARE folder. Processed profile images, shotpoint navigation maps, logbooks, and formal metadata may be viewed with your web browser.

Open-File Report↗
USGS2015

Geologic setting of the proposed Fallon FORGE Site, Nevada: Suitability for EGS research and development

The proposed Fallon FORGE site lies within and adjacent to the Naval Air Station Fallon (NASF) directly southeast of the town of Fallon, Nevada, within the large basin of the Carson Sink in west-central Nevada. The site is located on two parcels that include land owned by the NASF and leased and owned by Ormat Nevada, Inc. The Carson Sink in the vicinity of the Fallon site is covered by Quaternary deposits, including alluvial fan, eolian, and lacustrine sediments. Four wells penetrate the entire Neogene section and bottom in Mesozoic basement. Late Miocene to Quaternary basin-fill sediments are 0.5 to >1 km thick and overlie Oligocene-Miocene volcanic and lesser sedimentary rocks. The volcanic section is 0.5 to 1.0 km thick and dominated by Miocene mafic lavas. The Neogene section rests nonconformably on heterogeneous Mesozoic basement, which consists of Triassic-Jurassic metamorphic rocks intruded by Cretaceous granitic plutons. The structural framework is dominated by a gently west-tilted half graben cut by moderately to steeply dipping N- to NNEstriking normal faults that dip both east and west. Quaternary faults have not been observed within the proposed FORGE site. Fallon was selected for a potential FORGE site due to its extensional tectonic setting, abundance of available data, existing infrastructure, and documented temperatures, permeability, and lithologic composition of potential reservoirs that fall within the ranges specified by DOE for FORGE. Since the early 1970s, more than 45 wells have been drilled for geothermal exploration within the area. Four exploration wells within the FORGE site are available for use in the project. Several additional wells are available for monitoring outside the central FORGE site within the NASF and Ormat lease area, including numerous temperature gradient holes. There is an existing, ten-station micro-seismic earthquake (MEQ) array that has been collecting data since 2001; the MEQ array can be expanded to encompass the entire Fallon project. The well data indicate that a sizeable area (~4.5 km2 ) has adequate temperatures in crystalline basement but lacks sufficient permeability within the proposed FORGE site. There are two possible, competent target formations in Mesozoic basement for stimulation in the FORGE project area: 1) Jurassic felsic metavolcanic rocks/and or metaquartzite; and 2) Cretaceous granitic intrusions. These units make up at least 3 km3 in the project area and have target temperatures of ~175-215o C. The abundant well data and detailed geophysical surveys (e.g., gravity, MT, and seismic reflection) provide significant subsurface control for the site and will permit development of a detailed 3D model. The documented temperatures, low permeability, and basement lithologies, as well as abundant available data facilitate development of a site dedicated to testing and improving new EGS technologies and techniques, thus making Fallon an ideal candidate for FORGE.

GRC Transactions↗
USGS2026

Shallow hydrogeologic framework of the Tully Valley mudboil area, Onondaga County, New York

Mudboils have been documented in the Tully Valley in southern Onondaga County, New York, since the late 1890s. Sediment-laden water from the mudboils flows into Onondaga Creek, which empties into Onondaga Lake at Syracuse 15 miles to the north. Turbidity from the mudboils has degraded the water quality of Onondaga Creek despite a series of mitigation efforts that began in the early 1990s. Turbidity mitigation actions presently (2025) being considered include creek relocation and offline sediment settling. In support of these proposed actions during 2021–23, the U.S. Geological Survey, in cooperation with the New York State Department of Environmental Conservation, U.S. Environmental Protection Agency, Onondaga Nation, Onondaga Environmental Institute, and Central New York Regional Planning and Development Board, collected and analyzed geologic, hydrologic, geophysical, and geotechnical data to characterize the shallow hydrogeology along four proposed creek-relocation paths and in the proposed offline settling basin area. The investigation indicated that the four proposed creek-relocation paths, two east of Onondaga Creek and two west of Onondaga Creek, are underlain by sediments including muck, alluvium, mudboil deposits, alluvial-fan sand and gravel, and lacustrine fines. The proposed excavations would penetrate partially to fully saturated conditions: generally, the water table is shallow near the creek and deep on the alluvial fans. The shallowest excavation, about 5 feet below land surface, would be near the creek and primarily in alluvium, and the deepest excavation, as much as 30 feet below land surface, would be in the alluvial-fan deposits. Brackish waters would be penetrated by proposed channel excavations on the eastern side of Onondaga Creek in an area downgradient from a potentially leaking historical salt-exploration borehole and near the main mudboil area. Excavation in these areas likely would provide a continuous source of brackish groundwater to the relocated creek. Proposed channel excavations of muck, soft to very soft lacustrine fines, and mudboil-type sediments in mudboil and suspected mudboil areas would pose an excavation and slope stability challenge and would have the greatest potential to create new mudboils. Proposed channel excavations below the water table on the Rattlesnake Gulf and Rainbow Creek alluvial fans would intercept groundwater and make the constructed streambank susceptible to seepage-induced slope instability. The substantial water-level fluctuation in the sediments of both alluvial fans would aggravate the stability condition. In addition, excavation on the Rattlesnake Gulf alluvial fan would have the potential to affect water-supply springs at the toe of the fan. The proposed offline settling basin area is in the northern part of the Rattlesnake Gulf alluvial fan. Natural and man-made diversions of Rattlesnake Gulf have resulted in saturated conditions in the general area of the proposed basin. The proposed offline settling basin would be excavated in, and berms would be constructed on, alluvial-fan deposits and lacustrine fines. In the proposed basin area, the alluvial deposits overlying the lacustrine fines are less than 10 feet thick. Excavation, berm construction, and loading of the saturated, soft to very soft lacustrine fines may be problematic and require soil strengthening.

New York↗
USGS2017

Natural and human-induced variability in barrier-island response to sea level rise

Storm-driven sediment fluxes onto and behind barrier islands help coastal barrier systems keep pace with sea level rise (SLR). Understanding what controls cross-shore sediment flux magnitudes is critical for making accurate forecasts of barrier response to increased SLR rates. Here, using an existing morphodynamic model for barrier island evolution, observations are used to constrain model parameters and explore potential variability in future barrier behavior. Using modeled drowning outcomes as a proxy for vulnerability to SLR, 0%, 28%, and 100% of the barrier is vulnerable to SLR rates of 4, 7, and 10 mm/yr, respectively. When only overwash fluxes are increased in the model, drowning vulnerability increases for the same rates of SLR, suggesting that future increases in storminess may increase island vulnerability particularly where sediment resources are limited. Developed sites are more vulnerable to SLR, indicating that anthropogenic changes to overwash fluxes and estuary depths could profoundly affect future barrier response to SLR.

New Jersey↗
USGS2013

Exploring Hawaiian volcanism

In 1912 the Hawaiian Volcano Observatory (HVO) was established by Massachusetts Institute of Technology professor Thomas A. Jaggar Jr. on the island of Hawaii. Driven by the devastation he observed while investigating the volcanic disasters of 1902 at Montagne Pelée in the Caribbean, Jaggar conducted a worldwide search and decided that Hawai‘i provided an excellent natural laboratory for systematic study of earthquake and volcano processes toward better understanding of seismic and volcanic hazards. In the 100 years since HVO’s founding, surveillance and investigation of Hawaiian volcanoes have spurred advances in volcano and seismic monitoring techniques, extended scientists’ understanding of eruptive activity and processes, and contributed to development of global theories about hot spots and mantle plumes.

Hawai'i↗
USGS2006

Nature and origin of the hematite-bearing plains of Terra Meridiani based on analyses of orbital and Mars Exploration rover data sets

The ∼5 km of traverses and observations completed by the Opportunity rover from Endurance crater to the Fruitbasket outcrop show that the Meridiani plains consist of sulfate‐rich sedimentary rocks that are largely covered by poorly‐sorted basaltic aeolian sands and a lag of granule‐sized hematitic concretions. Orbital reflectance spectra obtained by Mars Express OMEGA over this region are dominated by pyroxene, plagioclase feldspar, crystalline hematite (i.e., concretions), and nano‐phase iron oxide dust signatures, consistent with Pancam and Mini‐TES observations. Mössbauer Spectrometer observations indicate more olivine than observed with the other instruments, consistent with preferential optical obscuration of olivine features in mixtures with pyroxene and dust. Orbital data covering bright plains located several kilometers to the south of the landing site expose a smaller areal abundance of hematite, more dust, and a larger areal extent of outcrop compared to plains proximal to the landing site. Low‐albedo, low‐thermal‐inertia, windswept plains located several hundred kilometers to the south of the landing site are predicted from OMEGA data to have more hematite and fine‐grained olivine grains exposed as compared to the landing site. Low calcium pyroxene dominates spectral signatures from the cratered highlands to the south of Opportunity. A regional‐scale model is presented for the formation of the plains explored by Opportunity, based on a rising ground water table late in the Noachian Era that trapped and altered local materials and aeolian basaltic sands. Cessation of this aqueous process led to dominance of aeolian processes and formation of the current configuration of the plains.

Journal of Geophysical Research E: Planets↗
USGS1994

Report on drilling activities in the Thar Desert, Sindh Province, Pakistan

Coal test drilling in the Thar Desert of southeast Pakistan was conducted as part of the Coal Exploration and Assessment Program (COALREAP) involving the United States Agency for International Development (USAID), the Geological Survey of Pakistan (GSP), and the U.S. Geological Survey. Drilling was performed in the Thar Desert, or Great Indian Desert, approximately 175 km northeast of Karachi. Twenty five exploration holes were drilled between January 1992 and May 1994. Drill core was described by geologists of the Pakistan Geological Survey and coal samples were analyzed in both the United States and Pakistan. U.S. Geological Survey geologists offered technical assistance, trained GSP personnel, and managed the drilling program according to an agreement with USAID under the Energy Planning and Development Project. Drilling was performed by the Geological Survey of Pakistan. During drilling, the first 50 m was rotary drilled and cuttings collected every 2 m for examination. Average depth for all coal beds is 214 m with a total average thickness of 10 m of coal per drill hole. Core was described, boxed, and stored at the Geological Survey of Pakistan core library at Sonda, near Hyderabad. Approximately 6,412 m of Paleocene to Eocene rock was drilled of which 3,990 m was cored and 1,113 m was rotary drilled. There was 1,309 m of core loss. Geophysical logging of each drill hole permitted detailed thicknesses of coal to be determined. Analysis of the coal indicated a rank of lignite B with an as-received heating value over 5,000 Btu. This report presents data collected at the drill sites and should be used in conjunction with the published interpretive report (Fassett and Durrani, 1994) and the USGS Open-File Report 94-167, which contains analysis of the coal samples. Tables provide quick reference to numeric data and results. Detailed index maps and specific data, for each drill hole are included. This report covers drill holes TP-5 to TP-31. Drill holes TP-16, 17, 21, 26, 27, and 29 were planned but not drilled due to time restraints and (or) a determination that those drill sites were not needed to effectively delineate the coal deposit. The basic data for drill holes TP-1 through TP-4 are included in SanFilipo and others, 1994 however, some data for these drill holes are included for consistency.

Sindh Province↗