USGS Science⌕ Search

SEARCH · USGS Science

Results for “Environmental Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23Linked to original sources
USGS2009

Methodology for Estimation of Flood Magnitude and Frequency for New Jersey Streams

Methodologies were developed for estimating flood magnitudes at the 2-, 5-, 10-, 25-, 50-, 100-, and 500-year recurrence intervals for unregulated or slightly regulated streams in New Jersey. Regression equations that incorporate basin characteristics were developed to estimate flood magnitude and frequency for streams throughout the State by use of a generalized least squares regression analysis. Relations between flood-frequency estimates based on streamflow-gaging-station discharge and basin characteristics were determined by multiple regression analysis, and weighted by effective years of record. The State was divided into five hydrologically similar regions to refine the regression equations. The regression analysis indicated that flood discharge, as determined by the streamflow-gaging-station annual peak flows, is related to the drainage area, main channel slope, percentage of lake and wetland areas in the basin, population density, and the flood-frequency region, at the 95-percent confidence level. The standard errors of estimate for the various recurrence-interval floods ranged from 48.1 to 62.7 percent. Annual-maximum peak flows observed at streamflow-gaging stations through water year 2007 and basin characteristics determined using geographic information system techniques for 254 streamflow-gaging stations were used for the regression analysis. Drainage areas of the streamflow-gaging stations range from 0.18 to 779 mi2. Peak-flow data and basin characteristics for 191 streamflow-gaging stations located in New Jersey were used, along with peak-flow data for stations located in adjoining States, including 25 stations in Pennsylvania, 17 stations in New York, 16 stations in Delaware, and 5 stations in Maryland. Streamflow records for selected stations outside of New Jersey were included in the present study because hydrologic, physiographic, and geologic boundaries commonly extend beyond political boundaries. The StreamStats web application was developed cooperatively by the U.S. Geological Survey and the Environmental Systems Research Institute, Inc., and was designed for national implementation. This web application has been recently implemented for use in New Jersey. This program used in conjunction with a geographic information system provides the computation of values for selected basin characteristics, estimates of flood magnitudes and frequencies, and statistics for stream locations in New Jersey chosen by the user, whether the site is gaged or ungaged.

Scientific Investigations Report↗
USGS2009

Estimating Prediction Uncertainty from Geographical Information System Raster Processing: A User's Manual for the Raster Error Propagation Tool (REPTool)

The U.S. Geological Survey Raster Error Propagation Tool (REPTool) is a custom tool for use with the Environmental System Research Institute (ESRI) ArcGIS Desktop application to estimate error propagation and prediction uncertainty in raster processing operations and geospatial modeling. REPTool is designed to introduce concepts of error and uncertainty in geospatial data and modeling and provide users of ArcGIS Desktop a geoprocessing tool and methodology to consider how error affects geospatial model output. Similar to other geoprocessing tools available in ArcGIS Desktop, REPTool can be run from a dialog window, from the ArcMap command line, or from a Python script. REPTool consists of public-domain, Python-based packages that implement Latin Hypercube Sampling within a probabilistic framework to track error propagation in geospatial models and quantitatively estimate the uncertainty of the model output. Users may specify error for each input raster or model coefficient represented in the geospatial model. The error for the input rasters may be specified as either spatially invariant or spatially variable across the spatial domain. Users may specify model output as a distribution of uncertainty for each raster cell. REPTool uses the Relative Variance Contribution method to quantify the relative error contribution from the two primary components in the geospatial model - errors in the model input data and coefficients of the model variables. REPTool is appropriate for many types of geospatial processing operations, modeling applications, and related research questions, including applications that consider spatially invariant or spatially variable error in geospatial data.

Techniques and Methods↗
USGS2005

Middle Mississippi River decision support system: user's manual

This user's manual describes the Middle Mississippi River Decision Support System (MMRDSS) and gives detailed examples on its use. The MMRDSS provides a framework to assist decision makers regarding natural resource issues in the Middle Mississippi River floodplain. The MMRDSS is designed to provide users with a spatially explicit tool for tasks, such as inventorying existing knowledge, developing models to investigate the potential effects of management decisions, generating hypotheses to advance scientific understanding, and developing scientifically defensible studies and monitoring. The MMRDSS also includes advanced tools to assist users in evaluating differences in complexity, connectivity, and structure of aquatic habitats among river reaches. The Environmental Systems Research Institute ArcView 3.x platform was used to create and package the data and tools of the MMRDSS.

Techniques and Methods↗
USGS2018

Selenium, mercury, and their molar ratios in sportfishes from drinking water reservoirs

Mercury (Hg) bioaccumulates in aquatic ecosystems and may pose a risk to humans who consume fish. Selenium (Se) has the ability to reduce Hg toxicity, but the current guidance for human consumption of fish is based on Hg concentration alone. The purpose of the present study was to examine the relationship between Se and Hg in freshwater sportfish, for which there is a paucity of existing data. We collected three species of fish from different trophic positions from two drinking water reservoirs in central North Carolina, USA, to assess Hg and Se concentrations in relation to fish total length and to compare two measures of the protective ability of Se, the Se:Hg molar ratio and Se health benefit value (HBV Se ), to current guidance for Hg. According to the Se:Hg molar ratio, all of the low trophic position fish sampled and the middle trophic position fish sampled from one of the reservoirs were safe for consumption. The same number of fish were considered safe using the HBV Se . More fish were deemed unsafe when using the Se:Hg molar ratio and HBV Se than were considered unsafe when using the U.S. Environmental Protection Agency (USEPA) Hg threshold. These findings suggest that the measures of Se protection may be unnecessarily conservative or that the USEPA Hg threshold may not be sufficiently protective of human health, especially the health of sensitive populations like pregnant or nursing mothers and young children. Future examination of the Se:Hg molar ratio and HBV Se from a variety of fish tissue samples would help refine the accuracy of these measures so that they may be appropriately utilized in ecological and human health risk assessment.

International Journal of Environmental Research an↗
USGS2020

Tissue distribution and immunomodulation in channel catfish (Ictalurus punctatus) following dietary exposure to polychlorinated biphenyl Aroclors and food deprivation

Although most countries banned manufacturing of polychlorinated biphenyls (PCBs) over 40 years ago, PCBs remain a global concern for wildlife and human health due to high bioaccumulation and biopersistance. PCB uptake mechanisms have been well studied in many taxa; however, less is known about depuration rates and how post-exposure diet can influence PCB concentrations and immune response in fish and wildlife populations. In a controlled laboratory environment, we investigated the influence of subchronic dietary exposure to two PCB Aroclors and food deprivation on tissue-specific concentrations of total PCBs and PCB homologs and innate immune function in channel catfish ( Ictalurus punctatus ). Overall, we found that the concentration of total PCBs and PCB homologs measured in whole body, fillet, and liver tissues declined more slowly in food-deprived fish, with slowest depuration observed in the liver. Additionally, fish that were exposed to PCBs had lower plasma cortisol concentrations, reduced phagocytic oxidative burst activity, and lower cytotoxic activity, suggesting that PCBs can influence stress and immune responses. However, for most measures of immune function, the effects of food deprivation had a larger effect on immune response than did PCB exposure. Taken together, these results suggest that short-term dietary exposure to PCBs can increase toxicity of consumable fish tissues for several weeks, and that PCB mixtures modulate immune and stress responses via multiple pathways. These results may inform development of human consumption advisories and can help predict and understand the influence of PCBs on fish health.

International Journal of Environmental Research an↗
USGS2020

Reconnaissance of surface water estrogenicity and the prevalence of intersex in smallmouth bass (Micropterus dolomieu) inhabiting New Jersey

The observation of testicular oocytes in male fishes has been utilized as a biomarker of estrogenic endocrine disruption. A reconnaissance project led in the Northeastern United States (US) during the period of 2008–2010 identified a high prevalence of intersex smallmouth bass on or near US Fish & Wildlife Service National Wildlife Refuges that included the observation of 100% prevalence in smallmouth bass males collected from the Wallkill River, NJ, USA. To better assess the prevalence of intersex smallmouth bass across the state of New Jersey, a tiered reconnaissance approach was initiated during the fall of 2016. Surface water samples were collected from 101 (85 river, 16 lake/reservoir) sites across the state at base-flow conditions for estrogenicity bioassay screening. Detectable estrogenicity was observed at 90% of the sites and 64% were above the US Environmental Protection Agency trigger level of 1 ng/L. Median surface water estrogenicity was 1.8 ng/L and a maximum of 6.9 ng/L E2EqBLYES was observed. Adult smallmouth bass were collected from nine sites, pre-spawn during the spring of 2017. Intersex was identified in fish at all sites, and the composite intersex prevalence was 93.8%. Prevalence across sites ranged from 70.6% to 100%. In addition to intersex, there was detectable plasma vitellogenin in males at all sites. Total estrogenicity in surface water was determined at these fish collection sites, and notable change over time was observed. Correlation analysis indicated significant positive correlations between land use (altered land; urban + agriculture) and surface water estrogenicity. There were no clear associations between land use and organismal metrics of estrogenic endocrine disruption (intersex or vitellogenin). This work establishes a baseline prevalence of intersex in male smallmouth bass in the state of New Jersey at a limited number of locations and identifies a number of waterbodies with estrogenic activity above an effects-based threshold.

New Jersey↗
USGS2020

Nontuberculous mycobacterial disease and molybdenum in Colorado watersheds

Nontuberculous mycobacteria (NTM) are environmental bacteria that may cause chronic lung disease. Environmental factors that favor NTM growth likely increase the risk of NTM exposure within specific environments. We aimed to identify water-quality constituents (Al, As, Cd, Ca, Cu, Fe, Pb, Mg, Mn, Mo, Ni, K, Se, Na, Zn, and pH) associated with NTM disease across Colorado watersheds. We conducted a geospatial, ecological study, associating data from patients with NTM disease treated at National Jewish Health and water-quality data from the Water Quality Portal. Water-quality constituents associated with disease risk were identified using generalized linear models with Poisson-distributed discrete responses. We observed a highly robust association between molybdenum (Mo) in the source water and disease risk. For every 1- unit increase in the log concentration of molybdenum in the source water, disease risk increased by 17.0%. We also observed a statistically significant association between calcium (Ca) in the source water and disease risk. The risk of NTM varied by watershed and was associated with watershed-specific water-quality constituents. These findings may inform mitigation strategies to decrease the overall risk of exposure.

Colorado↗
USGS2022

Plague and trace metals in natural systems

All pathogenic organisms are exposed to abiotic influences such as the microclimates and chemical constituents of their environments. Even those pathogens that exist primarily within their hosts or vectors can be influenced directly or indirectly. Yersinia pestis , the flea-borne bacterium causing plague, is influenced by climate and its survival in soil suggests a potentially strong influence of soil chemistry. We summarize a series of controlled studies conducted over four decades in Russia by Dr. Evgeny Rotshild and his colleagues that investigated correlations between trace metals in soils, plants, and insects, and the detection of plague in free-ranging small mammals. Trace metal concentrations in plots where plague was detected were up to 20-fold higher or lower compared to associated control plots, and these differences were >2-fold in 22 of 38 comparisons. The results were statistically supported in eight studies involving seven host species in three families and two orders of small mammals. Plague tended to be positively associated with manganese and cobalt, and the plague association was negative for copper, zinc, and molybdenum. In additional studies, these investigators detected similar connections between pasturellosis and concentrations of some chemical elements. A One Health narrative should recognize that the chemistry of soil and water may facilitate or impede epidemics in humans and epizootics in non-human animals.

International Journal of Environmental Research an↗
USGS2011

Detection, emission estimation and risk prediction of forest fires in China using satellite sensors and simulation models in the past three decades-An overview

Forest fires have major impact on ecosystems and greatly impact the amount of greenhouse gases and aerosols in the atmosphere. This paper presents an overview in the forest fire detection, emission estimation, and fire risk prediction in China using satellite imagery, climate data, and various simulation models over the past three decades. Since the 1980s, remotely-sensed data acquired by many satellites, such as NOAA/AVHRR, FY-series, MODIS, CBERS, and ENVISAT, have been widely utilized for detecting forest fire hot spots and burned areas in China. Some developed algorithms have been utilized for detecting the forest fire hot spots at a sub-pixel level. With respect to modeling the forest burning emission, a remote sensing data-driven Net Primary productivity (NPP) estimation model was developed for estimating forest biomass and fuel. In order to improve the forest fire risk modeling in China, real-time meteorological data, such as surface temperature, relative humidity, wind speed and direction，have been used as the model input for improving prediction of forest fire occurrence and its behavior. Shortwave infrared (SWIR) and near infrared (NIR) channels of satellite sensors have been employed for detecting live fuel moisture content (FMC), and the Normalized Difference Water Index (NDWI) was used for evaluating the forest vegetation condition and its moisture status.

International Journal of Environmental Research an↗
USGS2000

Tracking the spring migration of a bar-headed goose ( Anser indicus ) across the Himalaya with satellite telemetry

Soil-food-chain-pesticide wildlife relationships were investigated to learn the concentration of pesticide residues present in soils, macro-invertebrates, vertebrates, and seeds as a result of annual applications of aldrin at recommended rates for pest control. Two central Missouri cornfields treated witb aldrin at 1 lb/acre, for 16 and 15 of the past 17 years, were selected for study during 1965-67. Primary samples collected for residue analyses included soils, earthworms (Lumbricidae), crickets (GryIlidae), and two kinds of ground beetles (Carabidae) obtained during early April, June, August, and October. Vertebrates and plant seeds collected during 1967 included white-footed mice (Peromyscus maniculatus), toads (Bufo americanus), snakes (Thamnophis sirtalis and Pituophis sayi), corn (Zea Mays), foxtail (Setaria Faberii), and annual sunflower (Helianthus annuus). Pesticide residues consisted primarily of dieldrin, the degradation product of aldrin. Combined aldrin and dieldrin residues, as two field all-season averages, wet weight basis, were: soils, 0.31 ppm; earthworms, 1.49 ppm; crickets, 0.23 ppm; Harpalus ground beetles, 1.10 ppm; Poecilus ground beetles, 9.67 ppm; white-footed mice, 0.98 ppm; toads, 3.53 ppm; garter snakes, 12.35 ppm; and corn, foxtail, and sunflower seeds less than 0.02 ppm each. Unusually high average residues (37.48 ppm) in Poecilus beetles during June, 1967, were attributed to abnormally high soil moisture and predacious feeding habits of these insects.

Global Environmental Research↗
USGS1998

Estimation of octanol/water partition coefficients using LSER parameters

The logarithms of octanol/water partition coefficients, log Kow , were regressed against the linear solvation energy relationship (LSER) parameters for a training set of 981 diverse organic chemicals. The standard deviation for log Kow was 0.49. The regression equation was then used to estimate log Kow for a test of 146 chemicals which included pesticides and other diverse polyfunctional compounds. Thus the octanol/water partition coefficient may be estimated by LSER parameters without elaborate software but only moderate accuracy should be expected.

Advances in Environmental Research↗
USGS2002

U.S. Geological Survey spatial data access

The U.S. Geological Survey (USGS) has done a progress review on improving access to its spatial data holdings over the Web. The USGS EROS Data Center has created three major Web-based interfaces to deliver spatial data to the general public; they are Earth Explorer, the Seamless Data Distribution System (SDDS), and the USGS Web Mapping Portal. Lessons were learned in developing these systems, and various resources were needed for their implementation. The USGS serves as a fact-finding agency in the U.S. Government that collects, monitors, analyzes, and provides scientific information about natural resource conditions and issues. To carry out its mission, the USGS has created and managed spatial data since its inception. Originally relying on paper maps, the USGS now uses advanced technology to produce digital representations of the Earth’s features. The spatial products of the USGS include both source and derivative data. Derivative datasets include Digital Orthophoto Quadrangles (DOQ), Digital Elevation Models, Digital Line Graphs, land-cover Digital Raster Graphics, and the seamless National Elevation Dataset. These products, created with automated processes, use aerial photographs, satellite images, or other cartographic information such as scanned paper maps as source data. With Earth Explorer, users can search multiple inventories through metadata queries and can browse satellite and DOQ imagery. They can place orders and make payment through secure credit card transactions. Some USGS spatial data can be accessed with SDDS. The SDDS uses an ArcIMS map service interface to identify the user’s areas of interest and determine the output format; it allows the user to either download the actual spatial data directly for small areas or place orders for larger areas to be delivered on media. The USGS Web Mapping Portal provides views of national and international datasets through an ArcIMS map service interface. In addition, the map portal posts news about new map services available from the USGS, many simultaneously published on the Environmental Systems Research Institute Geography Network. These three information systems use new software tools and expanded hardware to meet the requirements of the users. The systems are designed to handle the required workload and are relatively easy to enhance and maintain. The software tools give users a high level of functionality and help the system conform to industry standards. The hardware and software architecture is designed to handle the large amounts of spatial data and Internet traffic required by the information systems. Last, customer support was needed to answer questions, monitor e-mail, and report customer problems.

Journal of Geospatial Engineering↗
USGS2015

Remote sensing systems – Platforms and sensors: Aerial, satellites, UAVs, optical, radar, and LiDAR

The American Society of Photogrammetry and Remote Sensing defined remote sensing as the measurement or acquisition of information of some property of an object or phenomenon, by a recording device that is not in physical or intimate contact with the object or phenomenon under study (Colwell et al., 1983). Environmental Systems Research Institute (ESRI) in its geographic information system (GIS) dictionary defines remote sensing as “collecting and interpreting information about the environment and the surface of the earth from a distance, primarily by sensing radiation that is naturally emitted or reflected by the earth’s surface or from the atmosphere, or by sending signals transmitted from a device and reflected back to it (ESRI, 2014).” The usual source of passive remote sensing data is the measurement of reflected or transmitted electromagnetic radiation (EMR) from the sun across the electromagnetic spectrum (EMS); this can also include acoustic or sound energy, gravity, or the magnetic field from or of the objects under consideration. In this context, the simple act of reading this text is considered remote sensing. In this case, the eye acts as a sensor and senses the light reflected from the object to obtain information about the object. It is the same technology used by a handheld camera to take a photograph of a person or a distant scenic view. Active remote sensing, however, involves sending a pulse of energy and then measuring the returned energy through a sensor (e.g., Radio Detection and Ranging [RADAR], Light Detection and Ranging [LiDAR]). Thermal sensors measure emitted energy by different objects. Thus, in general, passive remote sensing involves the measurement of solar energy reflected from the Earth’s surface, while active remote sensing involves synthetic (man-made) energy pulsed at the environment and the return signals are measured and recorded.

Book chapter↗
USGS2018

World distribution of uranium deposits

Deposit data derived from IAEA UDEPO (http://infcis.iaea.org/UDEPO/About.cshtml) database with assistance from P. Bruneton (France) and M. Mihalasky (U.S.A.). The map is an updated companion to "World Distribution of Uranium Deposits (UDEPO) with Uranium Deposit Classification, IAEA Tech-Doc-1629". Geology was derived from L.B. Chorlton, Generalized Geology of the World, Geological Survey of Canada, Open File 5529 , 2007. Map production by M.C. Fairclough (IAEA), J.A. Irvine (Austrailia), L.F. Katona (Australia) and W.L. Slimmon (Canada). World Distribution of Uranium Deposits, International Atomic Energy Agency, Vienna, Austria. Cartographic Assistance was supplied by the Geological Survey of South Australia, the Saskatchewan Geological Survey and United States Geological Survey to the IAEA. Coastlines, drainage, and country boundaries were obtained from ArcMap, 1:25 000 000 scale, and are copyrighted data containing the intellectual property of Environmental Systems Research Institute (ESRI). The use of particular designations of countries or territories does not imply any judgment by the publisher, the IAEA, as to the legal status of such countries or territories, of their authorities and institutions or of the delimitation of their boundaries. Any revisions or additional geological information known to the user would be welcomed by the International Atomic Energy Agency and the Geological Survey of Canada.

Report↗
USGS2019

Using mobile GIS applications to support mineral resource investigations in the Eglab region, Algeria

The Algerian Geological Survey Agency – U.S. Geological Survey (ASGA-USGS) mineral resource assessment project in the Eglab region, Algeria, comprises the eastern part of the Reguibat Shield bounded by the Tindouf, Reggane, and Taoudeni basins to the north, east, and south, respectively. The use of mobile GIS applications on handheld tablets facilitated team coordination and ease of transition from field planning and preparation, data collection and integration, and transfer back into project GIS databases. Mobile GIS applications facilitated collaboration between teams collecting disparate data types to support the geologic, geochronological, geochemical, field spectral, and geophysical investigations. This technology was used in parallel with the traditional field investigation methods. These tailored applications on GPS-enabled tablets provided a platform for utilization of GIS data in the field and allowed for standardized data collection, picklists, fewer transcription errors, and the ability to store photos, coordinates, and field notes together in an integrated system. The suite of Environmental Systems Research Institute, Inc. (Esri™) mobile applications allowed for customized use on multiple platforms (Android/Windows/iOS) to streamline data collection, analysis, and storage.

Eglab region↗
USGS2003

Geographic Information System Tools for Conservation Planning: User's Manual

Public and private land managers desire better ways to incorporate landscape, species, and habitat relations into their conservation planning processes. We present three tools, developed for the Environmental Systems Research Institute?s ArcView 3.x platform, applicable to many types of wildlife conservation management and planning efforts. These tools provide managers and planners with the ability to rapidly assess landscape attributes and link these attributes with species-habitat information. To use the tools, the user provides a detailed land cover spatial database and develops a matrix to identify species-habitat relations for the landscape of interest. The tools are applicable to any taxa or suite of taxa for which the required data are available. The user also has the ability to interactively make polygon-specific changes to the landscape and re-examine species-habitat relations. The development of these tools has given resource managers the means to evaluate the merits of proposed landscape management scenarios and to choose the scenario that best fits the goals of the managed area.

Information and Technology Report↗