USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of the Mechanics and Physics of Solids”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,706 records · Page 22Linked to original sources
USGS2024

Evidence for low effective stress within the crust of the subducted Gorda plate from the 2022 December Mw 6.4 Ferndale earthquake sequence

Stress levels on and adjacent to megathrust faults at seismogenic depths remain a key but difficult to constrain parameter for assessing seismic hazard in subduction zones. Although strong ground motions have been observed to be generated from distinct, high-stress regions on the downdip end of the megathrust rupture areas in many great earthquakes, we lack direct constraints on the stress level in the lower seismogenic portion of the Cascadia megathrust. On 2022 December 20, a M w 6.4 strike-slip earthquake occurred near Ferndale, California in southern Cascadia and likely ruptured the Gorda slab crust in the lower seismogenic portion, providing an opportunity to assess the stress level in this region. Here, we relocate the Ferndale mainshock and the first two weeks of aftershocks using a high-resolution 3-D velocity model and estimate rupture dimensions, directivity, and stress drop for several M w 4-5 aftershocks and recent earthquakes. The aftershocks define a strike-slip fault in the slab crust striking ENE, consistent with the mainshock focal mechanism. The orientation of this fault is about 45 ° off the ideally oriented fault plane given the stress state in the slab. The aftershock zone is extensive and broad in the forward direction of the mainshock rupture but still constrained within the volume of high Vp/Vs within the slab crust. Our stress drop estimates are generally lower for M w 4-5 earthquakes located within the slab crust compared to those a few km deeper in the slab mantle. Combined, our results support a relatively low effective stress level in the vicinity of the megathrust in the lower portion of the seismogenic zone in southern Cascadia, likely due to elevated fluid pressures. Consequently, the ground motion in the onshore region above this low-stress seismogenic portion in southern Cascadia may not be as intense as that observed during great earthquakes in other subduction zones.

California↗
USGS1997

Integrity of production wells and confining unit at the Naval Weapons Industrial Reserve Plant, Dallas, Texas, 1995

Ground water in the shallow alluvial aquifer is contaminated at the Naval Weapons Industrial Reserve Plant, Dallas, Texas. Five production wells at the site are cased through the alluvial aquifer and underlying units and are screened in either the Paluxy or Twin Mountains aquifers. Three abandoned wells, originally completed in the Twin Mountains aquifer but filled with drilling mud in 1958, also penetrate the alluvial aquifer. The Paluxy and Twin Mountains aquifers are used for drinking-water supplies in and around the Dallas-Fort Worth metroplex. Trichloroethylene and its degradation products, dichloroethylene and vinyl chloride, and the metal chromium previously have been detected in the shallow alluvial aquifer. Current (1995) analyses of water-quality samples taken from the static water column of the five production wells and one of the abandoned wells indicate no trichloroethylene, dichloroethylene, or vinyl chloride in the water column of these wells. Chromium was detected in all samples, but concentrations were less than the practical quantitation limit, which is the regulatory action level for this site. The results of borehole geophysical log analysis indicate that two of the production wells could have vertically connected intervals where cement bonding in the well annulus is poor. The other production wells have overall good bonding. Temperature logs do not indicate flow behind casing except in the screened interval of one well. Geophysical logs show the Eagle Ford Shale ranges from 147 to 185 feet thick at the site. The Eagle Ford Shale has low permeability and a high plasticity index. These physical characteristics make the Eagle Ford Shale an excellent confining unit.

Texas↗
USGS2025

Predictive regressive models of recent marsh sediment thickness improve the quantification of coastal marsh sediment budgets

Coastal marsh wetlands experience variations in vertical gains and losses through time, which have allowed them to infill relict topography and record variations in drivers. The stratigraphic unit associated with the development of the marsh also reflects the long-term importance of key ecosystem services supplied by the marsh environment, including carbon storage and storm mitigation. Mapping these coastal wetland sediments and the marsh unit thickness is challenging as traditional coastal geophysical tools are not easily deployable (acoustic methods) or are unreliable in saline-soil environments (e.g., ground-penetrating radar), leaving core-based methods the most viable mapping method. In the present study, we utilized prior information on the geologic architecture of the region to select spatial and physical metrics that likely persisted throughout evolution of the marsh during the late Holocene. We then assessed the individual and collective power of these metrics to predict marsh thickness observed from cores. Employing regressive predictive models powered by these data, we improve the quantification of marsh thickness for a coastal fringing marsh within the Grand Bay estuary in Mississippi and Alabama (USA). The information gained from this approach yields improved estimates of the carbon stocks in this environment. Additionally, the stored sediment masses reflect the past, and potential future, persistence of the Grand Bay marsh under historical and present marsh-estuarine sediment exchange fluxes. Such improvements to both the sediment budget of recent marsh stratigraphic units and the spatial extent provide new resources for comparison with large-scale landscape models, the latter of which may be used, when validated, to predict future change and ecosystem transformations.

Alabama. Mississippi↗
USGS2024

Limited evidence of late Quaternary tectonic surface deformation in the eastern Tennessee seismic zone, USA

The ~300-km-long eastern Tennessee seismic zone (ETSZ), USA, is the second-most seismically active region east of the Rocky Mountains. Seismicity generally occurs below the Paleozoic fold-and-thrust belt within the Mesoproterozoic basement, at depths of 5–26 km, and earthquake magnitudes during the instrumental record have been moment magnitude ( M w )≤4.8. Evidence of surface deformation may not exist or be difficult to detect because of the vegetated and soil-mantled landscape, landslides, locally steep topography, anthropogenic landscape modification, or long, irregular recurrence intervals between surface-rupturing earthquakes. Despite the deep seismicity, analog models indicate that accumulation of strike-slip or oblique-slip displacement at depth could be expected to propagate upward through the Paleozoic section, producing a detectable surficial signal of distributed faulting. To identify potential surface deformation, we interrogated the landscape at different spatial scales. We evaluated morphotectonic and channel metrics, such as channel sinuosity and catchment-scale hypsometry. Additionally, we mapped possible fault-related topographic features on 1-m lidar. Finally, we integrated our observations with available bedrock and Quaternary surficial mapping and subsurface geophysical data. At a regional scale, most morphotectonic and channel metrics have a strong lithologic control. Within smaller regions of similar lithology, we observe changes in landscape metrics like channel sinuosity and catchment-scale hypsometry that spatially correlate with new lineaments identified in this study and previously mapped east–west Cenozoic faults. These faults have apparent left-lateral offsets, are optimally oriented to slip in the current stress field, and match kinematics from recent focal mechanisms, but do not clearly preserve evidence of late Pleistocene or Holocene tectonic surface deformation. Most newly mapped lineaments might be explained by either tectonic or non-tectonic origins, such as fluvial or karst processes. We also re-evaluated a previously described paleoseismic site and interpret that the exposure does not record evidence of late Pleistocene faulting but instead is explained by fluvial stratigraphy.

Tennessee↗
USGS2025

Revisiting an enigma on California's north coast: The Mw6.5 Fickle Hill earthquake of 21 December 1954

Many earthquakes occur along the North Coast of California in the vicinity of the Mendocino Triple Junction (MTJ), where the Pacific, Gorda, and North American (NA) plates meet, and on the adjacent plate boundaries. The MTJ marks the nexus of the Mendocino and San Andreas faults with the Cascadia subduction zone (CSZ). Historically, most large earthquakes around the MTJ have been within the offshore Gorda plate and its subducted portion beneath the NA plate. North of the MTJ, active faults mapped in the NA plate are part of the CSZ fold‐and‐thrust belt. Although some events have been detected in the NA plate, no large historic events have been associated with mapped surface faults. The 21 December 1954 M w 6.5 earthquake in Humboldt County is one possible exception. Using published data from catalogs and articles, unpublished data from Berkeley’s archives, and S ‐ P times interpreted from two U.S. Coast and Geodetic Survey (USCGS) accelerometers, we determine a probability cloud for the earthquake’s hypocenter using NonLinLoc. The highest probability location lies beneath Fickle Hill just east of the city of Arcata, California, at 40.87° N, 124.03° W, and ∼11 km depth. Using P ‐wave polarities from Berkeley stations and the digitized waveforms from the accelerometers, we find that the focal mechanism most consistent with the data indicates thrust movement with strike, dip, and rake of 350°, 10°, and 90°, respectively, at a depth of 14 km. Given the depth uncertainties of both this event and the megathrust, this implies that the earthquake most likely took place on the subduction interface rather than on the mapped faults in the Mad River fault zone that trend 322° and dip to the northeast. The revisited intensity in the epicentral region also supports a location beneath Fickle Hill to the east of the city of Arcata, California.

California, Idaho, Nevada, Oregon, Washington↗
USGS2000

Ground-water quality atlas of Oakland County, Michigan

The U.S. Geological Survey (USGS), in cooperation with Oakland County Health Division (OCHD), collected 140 water samples from 38 wells in Oakland County during 1998 to better understand ground-water quality. OCHD had observed temporal variations in concentrations of various constituents, so two additional sets of samples were collected to evaluate potential short-term variability related to sample collection procedures and long-term seasonal variability. Replicate samples from 28 wells were analyzed in the Michigan Department of Environmental Quality (MDEQ) Drinking Water Laboratory to compare MDEQ’s analytical results to those obtained from the USGS National Water Quality Laboratory. Several additional databases describing population, land use, water supply, soils, geology, and flows of ground water and surface water are presented in the first part of the report to assist in interpreting the water-quality data. Maps created from these databases are provided in the first portion of the report as an extension of the study-area description. The U.S. Environmental Protection Agency (USEPA) has established Maximum Contaminant Levels (MCL) and Secondary Maximum Contaminant Levels (SMCL) for which samples were analyzed in this study. Water from the 38 wells sampled by the USGS did not exceed the SMCL or MCL for sulfate, fluoride, or nitrite. However, water from 26 wells exceeded the SMCL for iron, water from 12 wells exceeded the SMCL for manganese, and water from 12 wells exceeded the SMCL for dissolved solids. Water from two wells exceeded the MCL for nitrate, although nitrate concentrations in water from most wells was below the detection limit. Water from seven wells exceeded the SMCL for chloride, and water from all wells contained detectable concentrations of chloride. Water from five wells exceeded the MCL for arsenic, and most of the wells sampled contained detectable concentrations of arsenic. These five wells were identified from previous MDEQ analyses to have elevated arsenic concentrations, and were sampled to obtain additional chemistry information. Replicate samples were collected from 26 of the 38 wells for analysis at the MDEQ Drinking-Water Laboratory to compare the results with the USGS National Water Quality Laboratory. The results of the replicate analyses indicate close agreement between the laboratories, with mean differences for nitrate, chloride, and arsenic of 0.10 milligrams per liter (mg/L) as nitrogen, 6.8 mg/L, and 0.0008 mg/L, respectively between the USGS and MDEQ analyses. Potential health effects associated with ingesting nitrate, chloride, and arsenic are provided with the water-quality data, along with references for further information.

Michigan↗
USGS2025

Dynamic baseflow storage estimates and the role of topography, geology and evapotranspiration on streamflow recession characteristics in the Neversink Reservoir Watershed, New York

Estimates of dynamic groundwater volumes supplying baseflow to streams are important for water availability projections during extended periods of drought. The primary goals of this study were to provide dynamic storage volume estimates, inferred from streamflow recession analysis, for baseflow regimes within seven gaged catchments within the Neversink Reservoir Watershed (NRW), a critical municipal water source for New York City. Additionally, geomorphological properties, surficial geology and hydro-meteorological processes were quantified and described in relation to time and spatially variable recession behaviour and storage estimates across the NRW. To explore these relationships, we (1) evaluated seasonal trends in streamflow recession behaviour in relation to modelled potential evapotranspiration (PET) and catchment runoff rates, (2) derived empirical streamflow models for cool-season runoff using both linear and nonlinear reservoir assumptions for baseflow and (3) calculated metrics related to the geology and geomorphology of each catchment and compared these metrics to area normalised baseflow dynamic storage estimates. Results show that baseflow recession behaves as a nonlinear reservoir, and applying linear groundwater reservoir assumptions may underestimate the total dynamic storage volumes compared to what would be predicted for a nonlinear reservoir. Increases in PET caused decreases in storage conditions that resulted in increased recession rates and nonlinearity in streamflow recession during the growing season. Additionally, we found that while no single physical catchment characteristic solely predicted catchment storage dynamics, sediment volume and stream gradients were stronger predictors of normalised storage volumes than catchment surface area or surface topography alone. Within the NRW, catchments with the highest sediment volume exhibited the lowest recession rates and higher dynamic storage volumes, while the smallest catchment, mostly devoid of sediment, had the fastest recession rate and lowest dynamic storage volume.

New York↗
USGS2000

Water quality of selected springs and public-supply wells, Pine Ridge Indian Reservation, South Dakota, 1992-97

This report presents results of a water-quality study for the Pine Ridge Indian Reservation, South Dakota. The study was a cooperative effort between the U.S. Geological Survey and the Water Resources Department of the Oglala Sioux Tribe. Discharge and water-quality data were collected during 1992-97 for 14 contact springs located in the northwestern part of the Reservation. Data were collected to evaluate potential alternative sources of water supply for the village of Red Shirt, which currently obtains water of marginal quality from a well completed in the Inyan Kara aquifer. During 1995-97, water-quality data also were collected for 44 public-supply wells that serve about one-half of the Reservation's population. Quality-assurance sampling was used to evaluate the precision and accuracy of environmental samples. Ten of the springs sampled contact the White River Group, and four contact the Pierre Shale. Springs contacting the White River Group range from calcium bicarbonate to sodium bicarbonate water types. Two springs contacting the Pierre Shale have water types similar to this; however, sulfate is the dominant anion for the other two springs. In general, springs contacting the White River Group are shown to have better potential as alternative sources of water supply for the village of Red Shirt than springs contacting the Pierre Shale. Nine of the springs with better water quality were sampled repeatedly; however, only minor variability in water quality was identified. Six of these nine springs, of which five contact the White River Group, probably have the best potential for use as water supplies. Discharge from any of these six springs probably would provide adequate water supply for Red Shirt during most periods, based on a limited number of discharge measurements collected. Concentrations of lead exceeded the U.S. Environmental Protection Agency (USEPA) action level of 15 µg/L for three of these six springs. Five of these six springs also had arsenic concentrations that exceeded 10 µg/L, which could be problematic if the current maximum contaminant level (MCL) is lowered. Blending of water from one or more springs with water from the existing Inyan Kara well may be an option to address concerns regarding both quantity and quality of existing and potential sources. All nine springs that were sampled for indicator bacteria had positive detections on one or more occasions during presumptive tests. Although USEPA standards for bacteria apply only to public-water supplies, local residents using spring water for domestic purposes need to be aware of the potential health risks associated with consuming untreated water. One spring contacting the White River Group and two springs contacting the Pierre Shale exceeded 15 pCi/L for gross alpha; these values do not necessarily constitute exceedances of the MCL, which excludes radioactivity contributed by uranium and radon. Additional sampling using different analysis techniques would be needed to conclusively determine if any samples exceeded this MCL. Nine springs were sampled for selected pesticides and tritium. The pesticides atrazine, carbaryl, and 2,4-D were not detected in any of the samples. The nine springs were analyzed for tritium in order to generally assess the age of the water and to determine if concentrations exceeded the MCL established for gross beta-particle activity. Tritium results indicated two springs are composed primarily of water recharged prior to atmospheric testing of nuclear bombs and two other springs have a relatively large percentage of test-era water. The remaining five springs had tritium values that indicated some percentage of test-era water; however, additional sampling would be needed to determine whether water is predominantly pre- or post-bomb age. Of the 44 public-supply wells sampled, 42 are completed in the Arikaree aquifer, one is completed in an alluvial aquifer, and one is completed in the Inyan Kara aquifer. Water from the alluvial well is a sodium bicarbonate water type, water from Arikaree aquifer ranges from calcium bicarbonate to sodium bicarbonate types, and water from the Inyan Kara well is a calcium sulfate bicarbonate type. Of the 44 wells sampled, 28 (64 percent) tested positive for indicator bacteria in presumptive tests. Because these were single samples that generally were collected upstream from chemical treatment feeders, positive detections do not necessarily constitute exceedances of drinking-water standards. A single sample from an Arikaree well exceeded the MCL for arsenic of 50 µg/L. Arsenic exceeded 10 µg/L for six additional Arikaree wells and for the alluvial well and the Inyan Kara well, which could be problematic if the current MCL is lowered. The alluvial well also exceeded the secondary maximum contaminant level (SMCL) for dissolved solids, which is non-enforceable, and the action level for lead. The Inyan Kara well exceeded the SMCL's for iron and for manganese and the MCL of 5 pCi/L for radium-226 and 228 combined. Several Arikaree wells exceeded SMCL's for either pH, sulfate, dissolved solids, iron, or manganese. One Arikaree well exceeded the MCL of 4.0 mg/L for fluoride and another exceeded the MCL of 10 mg/L for nitrite plus nitrate. Ten Arikaree wells equalled or exceeded 15 pCi/L for gross alpha; however, these values do not necessarily constitute exceedances of the MCL, which excludes radioactivity contributed by uranium and radon. Additional sampling using different analysis techniques would be needed to conclusively determine if any samples exceeded this MCL. Eight wells, all from the Arikaree aquifer, equalled or exceeded the proposed MCL of 20 µg/L for uranium and 33 wells (75 percent) equalled or exceeded one-half of the proposed MCL. Although this standard has only been proposed, additional information regarding the extent of elevated uranium concentrations in the Arikaree aquifer, and the geochemical processes involved, may be beneficial. It was determined from analyses of uranium isotope data for five wells that the source of elevated uranium concentrations is naturally occurring, rather than anthropogenic.

South Dakota↗
USGS2024

Status and understanding of groundwater quality in the Mojave Basin Domestic-Supply Aquifer study unit, 2018—California GAMA Priority Basin Project

Groundwater quality in the western part of the Mojave Desert in San Bernardino County, California, was investigated in 2018 as part of the California State Water Resources Control Board Groundwater Ambient Monitoring and Assessment Program Priority Basin Project. The Mojave Basin Domestic-Supply Aquifer study unit (MOBS) region was divided into two study areas—floodplain and regional—to assess differences between the two major aquifers used for drinking water supply in the area. This assessment characterized the quality of ambient groundwater and not the quality of treated drinking water. The study included three components: (1) a status assessment, which characterized the quality of groundwater resources used for domestic drinking-water supply in the floodplain and regional study areas; (2) a brief understanding assessment, which evaluated factors that could potentially affect the quality of groundwater used by domestic wells in the region; and (3) a comparative assessment between the groundwater resources used by domestic wells and public-supply wells in the two study areas. The domestic-well assessment was based on data collected by the U.S. Geological Survey from 48 domestic wells in January–May 2018. The public-supply assessment was based on data for samples from 322 public-supply wells in 2008–18, either collected by the U.S. Geological Survey or compiled from the California State Water Resources Control Boards Division of Drinking Water publicly available database. Concentrations of water-quality constituents in ambient groundwater were compared to regulatory and non-regulatory benchmarks typically used by the State of California and Federal agencies as health-based or aesthetic standards for public drinking water. Relative concentrations, defined as the measured concentration divided by the benchmark concentration, were classified as high (greater than 1.0), moderate (greater than 0.5 for inorganic constituents or 0.1 for organic and special-interest constituents, and not high), or low (concentrations lower than moderate). The floodplain and regional study areas were divided into 15 and 35 grid cells, respectively, and grid-based methods were used to compute the areal proportions of the two study areas with high, moderate, or low relative concentrations of individual constituents and classes of constituents. For the domestic-supply assessment, one or more inorganic constituents with health-based benchmarks were detected at high relative concentrations in 58 percent of the regional study area and 13 percent of the floodplain study area. The inorganic constituents with health-based benchmarks detected at high relative concentrations in the regional study area were arsenic, chromium and hexavalent chromium, fluoride, adjusted gross alpha particle activity, uranium, molybdenum, strontium, and nitrate; only arsenic was detected at high relative concentrations in the floodplain study area. One or more inorganic constituents with secondary maximum contaminant level benchmarks were detected at high concentrations in 15 and 6.7 percent of the regional and floodplain study areas, respectively. The constituents detected at high relative concentrations in the regional study area were total dissolved solids, chloride, sulfate, and iron; only total dissolved solids and sulfate were detected at high relative concentrations in the floodplain study area. Organic constituents were not detected at moderate or high relative concentrations in either the regional or floodplain study areas. Volatile organic compounds were detected at low relative concentrations in 21 and 27 percent of the regional and floodplain study areas, respectively, and pesticides were detected at low relative concentrations in 9.1 and 20 percent of the regional and floodplain study areas, respectively. The only individual organic constituent detected in more than 10 percent of either study area was the trihalomethane trichloromethane. Total coliform bacteria were detected in 15 and 27 percent of the grid wells in the regional and floodplain study areas, respectively. The greater prevalence of high relative concentrations of many inorganic constituents in the regional study area compared to the floodplain area likely indicates the greater diversity of geologic material at depth in aquifer material and generally finer-grained alluvium compared to the floodplain study area combined with generally older groundwater that has had more contact time with aquifer materials. In general, trace element concentrations (1) increased with increasing groundwater age, (2) increased with distance from recharge sources in the mountains, and (3) increased with closer proximity to some types of geological units. In general, groundwater from domestic wells in the floodplain study area is young, with most samples containing a component of modern groundwater based on tritium and unadjusted carbon-14 activities, whereas groundwater from domestic wells in the regional study area generally is old, with most samples having unadjusted carbon-14 ages of 5,000–40,000 years. Public-supply wells in MOBS generally were deeper than domestic wells and presumably are in contact with older, more weathered alluvium that may have more mobile trace elements, such as arsenic or uranium. However, only 26 percent of the public-supply regional study area had high relative concentrations of inorganic constituents, compared to 58 percent for the domestic regional study area. The percentages of the public-supply and domestic floodplain study areas with high relative concentrations of inorganic constituents were 11 and 13 percent, respectively. The ages of groundwater used by public-supply and domestic wells in each study area were similar, which was not expected given the greater depth of the public-supply wells. Three potential factors may contribute to these results: (1) greater spatial footprint of domestic well network, which may result in domestic wells pumping groundwater from fractured bedrock or mineralized areas not used by public-supply wells; (2) greater pumping rates in public-supply wells, resulting in more water being withdrawn from coarse-grained, heterogeneous alluvium than finer-grained layers, which may have higher concentrations of (or more mobile) inorganic constituents; and (3) a greater degree of well management with public-supply wells, which may include pausing use of or decommissioning wells if treating or blending water is not feasible to lower constituent concentrations.

California↗
USGS2025

A scientific vision and roadmap for earthquake rupture forecast developments, a USGS perspective

We articulate a scientific vision and roadmap for the development of improved Earthquake Rupture Forecast models, which are one of the two main modeling components used in modern seismic hazard and risk analysis. One primary future objective is to provide fully time-dependent models that include both elastic rebound and spatiotemporal clustering nationwide, which is particularly important for shorter-term hazard and risk considerations (e.g., earthquake insurance products). We also discuss the importance and perennial challenges associated with quantifying epistemic uncertainties, including those associated with deformation-model slip rates, un-quantified sampling errors with respect to off-fault seismicity, and any spatial covariances. The need for more physics-based approaches is also emphasized, as is the benefit of adding model valuation (quantifying usefulness) to our verification and validation protocols. Given the multidisciplinary and system-level nature of this activity, modular design is critical. Future updates will also draw from best-available science by both the United States Geological Survey and the external community. The primary goal of this paper is to highlight plans that guide research and facilitate community engagement with model development, especially with respect to lowering the entry barrier for early career scientists and engineers. The paper is written so readers can focus on the sections that interest them most (see table of contents), with the Introduction and Discussion providing a stand-alone overview and summary.

Bulletin of the Seismological Society of America↗
USGS2024

Post-glacial stratigraphy and late Holocene record of great Cascadia earthquakes in Ozette Lake, Washington, USA

Ozette Lake is an ~100-m-deep coastal lake located along the outer coast of the Olympic Peninsula (Washington, USA); it is situated above the locked portion of the northern Cascadia megathrust but also relatively isolated from active crustal faults and intraslab earthquakes. Here we present a suite of geophysical and geological evidence for earthquake-triggered mass transport deposits (MTDs) and related turbidite deposition in Ozette Lake since ca. 14 ka. Comprehensive high-resolution bathymetry data, seismic reflection profiles, and sediment cores are used to characterize the post-glacial stratigraphic framework and examine paleoseismic evidence in the lacustrine sediments. Stacked sequences of MTDs along the steep eastern flanks of the lake appear to grade basin-ward from thick, chaotic, blocky masses to thin, parallel-bedded turbidite beds. The discrete turbidite event layers are separated by fine-grained (silt and clay) lake sedimentation. The event layers are observed throughout the lake, but the physical characteristics of the deposits vary considerably depending on proximity to primary depocenters, steep slopes, and subaqueous deltas. A total of 30–34 event deposits are observed in the post-glacial record. Radiometric dating was used to reconstruct a detailed sedimentation history over the last ~5.5 k.y., develop an age model, and estimate the recurrence (365–405 yr) for the most recent 12 event layers. Based on sedimentological characteristics, temporal overlap with other regional paleoseismic chronologies, and recurrence estimates, at least 10 of the dated event layers appear to be sourced from slope failures triggered by intense shaking during megathrust ruptures; the recurrence interval for these 10 events is 440–560 yr. Thus, Ozette Lake contains one of the longest and most robust geological records of repeated shaking along the northern Cascadia subduction zone.

Washington↗
USGS2024

Debris-flow entrainment modelling under climate change: Considering antecedent moisture conditions along the flow path

Debris-flow volumes can increase along their flow path by entraining sediment stored in the channel bed and banks, thus also increasing hazard potential. Theoretical considerations, laboratory experiments and field investigations all indicate that the saturation conditions of the sediment along the flow path can greatly influence the amount of sediment entrained. However, this process is usually not considered for practical applications. This study aims to close this gap by combining runout and hydrological models into a predictive framework that is calibrated and tested using unique observations of sediment erosion and debris-flow properties available at a Swiss debris-flow observation station (Illgraben). To this end, hourly water input to the erodible channel is predicted using a simple, process-based hydrological model, and the resulting water saturation level in the upper sediment layer of the channel is modelled based on a Hortonian infiltration concept. Debris-flow entrainment is then predicted using the RAMMS debris-flow runout model. We find a strong correlation between the modelled saturation level of the sediment on the flow path and the channel-bed erodibility for single-surge debris-flow events with distinct fronts, indicating that the modelled water content is a good predictor for erosion simulated in RAMMS. Debris-flow properties with more complex flow behaviour (e.g., multiple surges or roll waves) are not as well predicted using this procedure, indicating that more physically complete models are necessary. Finally, we demonstrate how this modelling framework can be used for climate change impact assessment and show that earlier snowmelt may shift the peak of the debris-flow season to earlier in the year. Our novel modelling framework provides a plausible approach to reproduce saturation-dependent entrainment and thus better constrain event volumes for current and future hazard assessment.

Illgraben basin↗
USGS2024

Simulating present and future groundwater/surface-water interactions and stream temperatures in Beaver Creek, Kenai Peninsula, Alaska

In many places, coldwater ecosystems are facing increasing pressure from anthropogenic warming. This study examined stream temperatures and the water balance in the Beaver Creek watershed on the Kenai Peninsula in south-central Alaska—an area that is experiencing rapid warming. Low-gradient streams near the Kenai coast provide important spawning and rearing habitat for salmon but may be especially vulnerable to rising temperatures, because of long residence times, inflows from abundant riparian wetlands, and reliance on groundwater discharge that may also warm, or decrease in volume with rising evapotranspiration. In recent decades, observed maximum 7-day temperatures have consistently exceeded statistical (regression-based) projections. Here we simulate total streamflows and temperatures with a physics-based model that links the Soil Water Balance, MODFLOW 6 and SNTEMP simulation codes on a 7-day timestep. The model is based on existing data and groundwater levels, instream flows, and stream temperatures collected during 2019–23. Future climate scenarios were developed for 2023–50 from downscaled climate projections. Results indicate that groundwater discharge is about 64 percent of the total streamflow during the months of May through September. Total streamflow and groundwater discharge are expected to remain similar to current conditions through 2050. Stream temperatures are expected to rise; by midcentury, near the Beaver Creek mouth the model predicts 34 to 63 additional days per year with average weekly temperatures above 13 degrees Celsius, 14 to 81 additional days with average weekly temperatures above 15 degrees Celsius, and routine exceedances of 20 degrees Celsius during the warmest periods. Projected stream temperatures vary spatially. Areas of high groundwater inflows in the lower main stem and some tributaries may be most resilient to warming air temperatures during dry conditions. During storm events, groundwater-dominated tributaries may have the coolest stream temperatures.

Alaska↗
USGS1998

Characterization of hydrogeologic units using matrix properties, Yucca Mountain, Nevada

Determination of the suitability of Yucca Mountain, in southern Nevada, as a geologic repository for high-level radioactive waste requires the use of numerical flow and transport models. Input for these models includes parameters that describe hydrologic properties and the initial and boundary conditions for all rock materials within the unsaturated zone, as well as some of the upper rocks in the saturated zone. There are 30 hydrogeologic units in the unsaturated zone, and each unit is defined by limited ranges where a discrete volume of rock contains similar hydrogeologic properties. These hydrogeologic units can be easily located in space by using three-dimensional lithostratigraphic models based on relation- ships of the properties with the lithostratigraphy. Physical properties of bulk density, porosity, and particle density; flow properties of saturated hydraulic conductivity and moisture-retention characteristics; and the state variables (variables describing the current state of field conditions) of saturation and water potential were determined for each unit. Units were defined using (1) a data base developed from 4,892 rock samples collected from the coring of 23 shallow and 8 deep boreholes, (2) described lithostratigraphic boundaries and corresponding relations to porosity, (3) recognition of transition zones with pronounced changes in properties over short vertical distances, (4) characterization of the influence of mineral alteration on hydrologic properties such as permeability and moisture-retention characteristics, and (5) a statistical analysis to evaluate where boundaries should be adjusted to minimize the variance within layers. This study describes the correlation of hydrologic properties to porosity, a property that is well related to the lithostratigraphy and depositional and cooling history of the volcanic deposits and can, therefore, be modeled to be distributed laterally. Parameters of the hydrogeologic units developed in this study and the relation of flow properties to porosity that are described can be used to produce detailed and accurate representations of the core-scale hydrologic processes ongoing at Yucca Mountain.

Nevada↗
USGS2026

Spatio-temporal modeling for assessing geoenergy resources: A workflow applied to gas in place variation in coal beds

The ability to estimate spatio-temporal changes in hydrocarbon reservoir properties and energy resources within pore volumes is essential for optimizing production, reservoir management, geologic energy storage, and safety in underground mining operations. In coal seams, predicting remaining methane gas-in-place (GIP) is critical for quantifying producible gas and improving mine safety and productivity through effective ventilation planning. Although such changes are commonly evaluated using physics-based numerical simulation models, these approaches often require extensive data, calibration effort, and time. This study presents a spatio-temporal geostatistical modeling approach that bridges the gap between purely spatial models and full numerical simulations. The method is applied to a case study of coal seam degasification in the Mary Lee coal group, Black Warrior Basin, Alabama, USA, to estimate GIP evolution over time within a selected mining district. The analysis uses published data from prior natural gas production history-matching of degasification using vertical wells. Empirical spatial and temporal statistics were calculated for reservoir pressure and water saturation, and spatio-temporal variogram models were fitted to experimental variograms. These models provided the structural basis for spatio-temporal kriging, integrated with spatial estimates of time-invariant parameters (porosity, density, and thickness) to estimate GIP. This approach enabled estimation of GIP changes over time, including periods without data. Boxplots of GIP estimates indicated systematic depletion and decreasing spatial variability, reflecting the impacts of degasification. Comparison with cumulative gas production from empirical well records showed approximately 85% agreement based on a relative similarity metric. Spatio-temporal GIP estimates were also used to estimate methane emissions to longwall ventilation systems and compared with reported emissions from the U.S. EPA Greenhouse Gas Reporting Program, showing similar distributions (≈80%) given data limitations. Overall, this integrated modeling approach provides time-dependent GIP estimates with broader implications for resource assessment applications.

Alabama↗
USGS2024

Global variability of the composition and temperature at the 410-km discontinuity from receiver function analysis of dense arrays

Seismic boundaries caused by phase transitions between olivine polymorphs in Earth's mantle provide thermal and compositional markers that inform mantle dynamics. Seismic studies of the mantle transition zone often use either global averaging with sparse arrays or regional sampling from a single dense array. The intermediate approach of this study utilizes many densely spaced seismic arrays distributed around the globe. We systematically compute teleseismic P-to-S receiver functions for each seismic array and invert for the 1-D seismic velocity structure of the mantle transition zone beneath each array to facilitate a comparison between densely sampled regions. We stack 3,600 receiver functions on average at 67 arrays in total. The stack is used in a probabilistic inversion to estimate the mantle transition zone interface depths and velocities beneath each array. We focus on the 410-km discontinuity (410) because it is a prominent seismic interface that is clearly linked to a single mineral phase transition between olivine and wadsleyite. The depths and velocity contrasts of the 410 are mapped to temperatures and compositions using mineral physics constraints. The depth of the 410 ranges from ∼405–440 km, which is consistent with a ∼360 K temperature range in a dry mantle and a ∼260 K temperature range in a wet mantle (2 wt. % water). The Vs contrast across the 410 ranges from ∼2.5–8 %, which is consistent with ∼20–70 vol. % olivine composition in a dry mantle and ∼25–80 vol. % in a wet mantle. The bulk composition of the upper mantle near the 410-km discontinuity is typically considered to be well-mixed because there is no thermodynamic impediment to convection at the olivine to wadsleyite phase transition. However, the wide range of inferred olivine content from our study suggests that there are large lateral variations in the bulk composition of the upper mantle near the 410-km discontinuity.

Earth and Planetary Science Letters↗
USGS2025

An empirical Green’s function approach for isolating directivity effects in earthquake ground-motion amplitudes

In this study, we apply an empirical Green’s function (eGf) method within a ground‐motion modeling framework to mitigate trade‐offs between source, path, and site effects. Many physical processes contribute to spatial variations in observed ground motions, including earthquake radiation pattern, directivity, variable path attenuation, and site effects. Current nonergodic ground‐motion models use spatially varying coefficients for path and site effects, but they do not address trade‐offs with complex earthquake source effects. To quantify the influence of directivity on ground‐motion amplitudes, we use records from multiple smaller earthquakes with epicenters near that of a larger event. We use these small magnitude events as eGfs and estimate repeatable path and site effects at individual stations, assuming that the average adjustments are not controlled by directivity. We adjust residuals from the larger earthquake using the eGf terms, isolating effects related to the rupture. This method clearly enhances the observed broadband directivity observed in the 2022 M 5.1 and 2007 M 5.4 Alum Rock earthquake ground motions, reinforcing the conclusion that their ruptures were unilateral. For the 2004 M 6.0 Parkfield earthquake, we find a bilateral rupture model better fits the data because variations in rupture velocity, slip rate, and slip distribution seem to have a stronger effect on the ground motions than rupture direction alone. Applying eGf adjustments reduces the standard deviation of the rupture models over the three earthquakes by 32% on average and by up to 57% for the 2022 Alum Rock earthquake, confirming we have effectively removed repeatable effects related to the wave propagation path and site response. We propose a novel measure of the frequency‐dependent directivity amplification strength as the reduction in ground‐motion residual variability gained by fitting a directivity model; for the three earthquakes considered, this parameter varies between 25% and 75%, indicating that directivity can strongly influence ground motions and should be considered in ground‐motion modeling.

California↗
USGS2025

Magnitude, depth and methodological variations of spectral stress drop within the SCEC/USGS Community Stress Drop Validation Study using the 2019 Ridgecrest Earthquake Sequence

We present the first ensemble analysis of the 56 different sets of results submitted to the ongoing Community Stress Drop Validation Study using the 2019 Ridgecrest, California, earthquake sequence. Different assumptions and methods result in different estimation of the source contribution to recorded seismograms, and hence to the source parameters (principally corner frequency, f c ⁠ , spectral stress drop, Δσ, and seismic moment, M 0 ⁠ ) obtained from modeling calculated source spectra. For earthquakes smaller than magnitude (M) 2.5 there is negligible correlation between the f c values obtained by different studies, implying that no present method is reliable using available data. For larger magnitude events, correlation between f c measurements of different studies, within even a small M range is always higher than spectral ⁠Δσ , because the f c measurements simply reflect the underlying physical decrease in f c with increasing M. We model the observed trends of submitted f c with both magnitude and depth. Most methods report an increase in spectral Δσ with M, although a magnitude‐invariant spectral Δσ is within the confidence limits. The depth dependence is smaller and depends on whether a study allows attenuation to vary with source depth; a combination of depth‐dependent attenuation correction, and depth‐dependent shear‐wave velocity can compensate for reported depth trends. We model the submitted values to remove differing M and depth variation to investigate the relative interevent variability. We find consistent relative variation between individual events, and also lower relative spectral Δσ in the northwest of the aftershock sequence, and higher on the cross fault and in the region of main fault intersection. This large‐scale comparison implies that absolute spectral Δσ estimates are dependent on the methods used; studies of different regions or using different methods should not be directly compared and improved constraints on path and site corrections are needed to resolve these absolute spectral Δσ differences.

California↗