USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Geophysical Research - Oceans”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22Linked to original sources
USGS2001

Viscoelastic shear zone model of a strike-slip earthquake cycle

I examine the behavior of a two-dimensional (2-D) strike-slip fault system embedded in a 1-D elastic layer (schizosphere) overlying a uniform viscoelastic half-space (plastosphere) and within the boundaries of a finite width shear zone. The viscoelastic coupling model of Savage and Prescott [1978] considers the viscoelastic response of this system, in the absence of the shear zone boundaries, to an earthquake occurring within the upper elastic layer, steady slip beneath a prescribed depth, and the superposition of the responses of multiple earthquakes with characteristic slip occurring at regular intervals. So formulated, the viscoelastic coupling model predicts that sufficiently long after initiation of the system, (1) average fault-parallel velocity at any point is the average slip rate of that side of the fault and (2) far-field velocities equal the same constant rate. Because of the sensitivity to the mechanical properties of the schizosphere-plastosphere system (i.e., elastic layer thickness, plastosphere viscosity), this model has been used to infer such properties from measurements of interseismic velocity. Such inferences exploit the predicted behavior at a known time within the earthquake cycle. By modifying the viscoelastic coupling model to satisfy the additional constraint that the absolute velocity at prescribed shear zone boundaries is constant, I find that even though the time-averaged behavior remains the same, the spatiotemporal pattern of surface deformation (particularly its temporal variation within an earthquake cycle) is markedly different from that predicted by the conventional viscoelastic coupling model. These differences are magnified as plastosphere viscosity is reduced or as the recurrence interval of periodic earthquakes is lengthened. Application to the interseismic velocity field along the Mojave section of the San Andreas fault suggests that the region behaves mechanically like a ???600-km-wide shear zone accommodating 50 mm/yr fault-parallel motion distributed between the San Andreas fault system and Eastern California Shear Zone. Copyright 2001 by the American Geophysical Union.

California↗
USGS2002

Lower crustal deformation beneath the central Transverse Ranges, southern California: Results from the Los Angeles Region Seismic Experiment

We present a P wave velocity model derived from active source seismic data collected during the 1994 Los Angeles Region Seismic Experiment. Our model extends previously published upper crustal velocity models to mantle depths. Our model was developed by both ray tracing through a layered model and calculating travel times through a gridded model. It includes an 8-km-thick crustal root centered beneath the surface trace of the San Andreas fault, north of the highest topography in the San Gabriel Mountains. A simple mass balance calculation suggests that ∼36 km of north-south shortening across the San Andreas fault in the central Transverse Ranges could have formed this root. If north-south compression began when the “Big Bend” in the San Andreas fault formed at ∼5 Ma, 36 km of shortening implies a north-south contraction rate of ∼7.1 mm/yr across the central Transverse Ranges. If, instead, north-south compression began when the Transverse Ranges formed at 3.4–3.9 Ma, 36 km of shortening implies a contraction rate of 9.2–10.6 mm/yr. North of the San Andreas fault, the Mojave Desert crust has a low-velocity (6.3 km/s) mid and lower crust and a 28-km-deep Moho. South of the San Andreas fault, beneath the Los Angeles and San Gabriel Valley basins, there is a fast (6.6–6.8 km/s), thick (10–12 km) lower crust with a 27-km-deep Moho. Farther south still, the lower crust of the Continental Borderland is fast (6.6–6.8 km/s) and thin (5 km) with a shallow (22 km deep) Moho.

California↗
USGS2002

Carbon dioxide emission rate of Kīlauea Volcano: Implications for primary magma and the summit reservoir

We report a CO 2 emission rate of 8500 metric tons per day (t d −1 ) for the summit of Kīlauea Volcano, several times larger than previous estimates. It is based on three sets of measurements over 4 years of synchronous SO 2 emission rates and volcanic CO 2 /SO 2 concentration ratios for the summit correlation spectrometer (COSPEC) traverse. Volcanic CO 2 /SO 2 for the traverse is representative of the global ratio for summit emissions. The summit CO 2 emission rate is nearly constant, despite large temporal variations in summit CO 2 /SO 2 and SO 2 emission rates. Summit CO 2 emissions comprise most of Kīlauea's total CO 2 output (∼9000 t d −1 ). The bulk CO 2 content of primary magma determined from CO 2 emission and magma supply rate data is ∼0.70 wt %. Most of the CO 2 is present as exsolved vapor at summit reservoir depths, making the primary magma strongly buoyant. Turbulent mixing with resident reservoir magma, however, prevents frequent eruptions of buoyant primary magma in the summit region. CO 2 emissions confirm that the magma supply enters the edifice through the summit reservoir. A persistent several hundred parts per million CO 2 anomaly arises from the entry of magma into the summit reservoir beneath a square kilometer area east of Halemaumau pit crater. Since most of the CO 2 in primary magma is degassed in the summit, the summit CO 2 emission rate is an effective proxy for the magma supply rate. Both scrubbing of SO 2 and solubility controls on CO 2 and S in basaltic melt cause high CO 2 /SO 2 in summit emissions and spatially uncorrelated distributions of CO 2 and SO 2 in the summit plume.

Journal of Geophysical Research B: Solid Earth↗
USGS2002

Magmatic inflation at a dormant stratovolcano: 1996-1998 activity at Mount Peulik volcano, Alaska, revealed by satellite radar interferometry

A series of ERS radar interferograms that collectively span the time interval from July 1992 to August 2000 reveal that a presumed magma body located 6.6 ??? 0.5 km beneath the southwest flank of the Mount Peulik volcano inflated 0.051 ??? 0.005 km3 between October 1996 and September 1998. Peulik has been active only twice during historical time, in 1814 and 1852, and the volcano was otherwise quiescent during the 1990s. The inflation episode spanned at least several months because separate interferograms show that the associated ground deformation was progressive. The average inflation rate of the magma body was ???0.003 km3/month from October 1996 to September 1997, peaked at 0.005 km3/month from 26 June to 9 October 1997, and dropped to ???0.001 km3/month from October 1997 to September 1998. An intense earthquake swarm, including three ML 4.8 - 5.2 events, began on 8 May 1998 near Becharof Lake, ???30 km northwest of Peulik. More than 400 earthquakes with a cumulative moment of 7.15 ?? 1017 N m were recorded in the area through 19 October 1998. Although the inflation and earthquake swarm occurred at about the same time, the static stress changes that we calculated in the epicentral area due to inflation beneath Peulik appear too small to provide a causal link. The 1996-1998 inflation episode at Peulik confirms that satellite radar interferometry can be used to detect magma accumulation beneath dormant volcanoes at least several months before other signs of unrest are apparent. This application represents a first step toward understanding the eruption cycle at Peulik and other stratovolcanoes with characteristically long repose periods.

Alaska↗
USGS2002

Topographic stress perturbations in southern Davis Mountains, west Texas 1. Polarity reversal of principal stresses

We have applied a previously developed analytical stress model to interpret subsurface stress conditions inferred from acoustic televiewer logs obtained in two municipal water wells located in a valley in the southern Davis Mountains near Alpine, Texas. The appearance of stress-induced breakouts with orientations that shift by 90° at two different depths in one of the wells is explained by results from exact solutions for the effects of valleys on gravity and tectonically induced subsurface stresses. The theoretical results demonstrate that above a reference depth termed the hinge point, a location that is dependent on Poisson's ratio, valley shape, and magnitude of the maximum horizontal tectonic stress normal to the long axis of the valley, horizontal stresses parallel to the valley axis are greater than those normal to it. At depths below this hinge point the situation reverses and horizontal stresses normal to the valley axis are greater than those parallel to it. Application of the theoretical model at Alpine is accommodated by the fact that nearby earthquake focal mechanisms establish an extensional stress regime with the regional maximum horizontal principal stress aligned perpendicular to the valley axis. We conclude that the localized stress field associated with a valley setting can be highly variable and that breakouts need to be examined in this context when estimating the orientations and magnitudes of regional principal stresses.

Texas↗
USGS2002

Topographic stress perturbations in southern Davis Mountains, west Texas 2. Hydrogeologic implications

As part of a regional groundwater investigation, geophysical logs were obtained in two municipal water wells located near the west Texas city of Alpine. These boreholes are 252 and 285 m deep and penetrate extrusive rocks of Tertiary age. The deeper well was drilled in the central valley and the other along the northern flank of an east-west trending valley-ridge setting. Analysis and interpretation of the logs reveal that the two wells are subjected to significantly different stress environments because of topographic effects and exhibit significantly different hydrogeologic properties. Water production is associated with two specific types of features common to both wells: (1) the upper and lower contacts of a dense trachyte unit located in the shallow part of the wells and (2) deeper zones of highly fractured rocks within the interior of a basalt formation. The transmissivity of the trachyte boundaries is twice as large in the central valley well as it is in the ridge flank well, whereas the transmissivity of the deeper basalts is an order of magnitude greater in the flank well than it is in the central well. This discrepancy is examined from the perspective of rock failure, fracture opening, and flow enhancement by computing values for a Drucker-Prager stability factor that is based on the magnitudes of the normal and deviatoric stress invariants as a function of depth. Thus the field measurements and subsequent stress analysis offer evidence of a coupled tectonic-hydrologic interaction at this site.

Texas↗
USGS2002

A Holocene paleosecular variation from 14C-dated volcanic rocks in western North America

A paleosecular variation (PSV) curve for western North America is presented on the basis of 94 virtual geomagnetic poles (VGPs) from dated volcanic rocks sampled at 446 sites. Approximately 60% of the paleomagnetic database has been previously published. A curve defined by “spherical smoothed splines” is fitted to the VGPs, ranked by the quality of the age determinations, where the data density is highest between 3690 and −30 years before present (B.P.) (A.D. 1950), between 7800 and 7050 years B.P., and between 14,060 and 12,700 years B.P. The younger segments of the curve derived from volcanic rocks are similar but less complex than other high-resolution PSV curves derived from lacustrine sediments, particularly the record at Fish Lake, Oregon. The PSV record from lava flows (PSVL), however, is perhaps more reliable in its general shape and chronology because of the higher fidelity of volcanic rocks as magnetic field recorders and because of the greater density of 14 C dates. The new PSVL record provides a partial Holocene master curve for western North America and will be of particular value in dating geological and archeological materials using paleomagnetic directions.

Arizona, California, Colorado, Idaho, New Mexico, ↗
USGS2003

The crustal structure from the Altai Mountains to the Altyn Tagh fault, northwest China

[1] We present a new crustal section across northwest China based on a seismic refraction profile and geologic mapping. The 1100‐km‐long section crosses the southern margin of the Chinese Altai Mountains, Junggar Accretional Belt and eastern Junggar basin, easternmost Tianshan Mountains, and easternmost Tarim basin. The crustal velocity structure and Poisson's ratio (σ), which provide a constraint on crustal composition, were determined from P and S wave data. Despite the complex geology, the crustal thickness along the entire profile is nearly uniform at 50 km. The thickest crust (56 km) occurs at the northern end of the profile beneath the Altai Mountains and the thinnest (46 km) crust is beneath the Junggar basin. Beneath surficial sediments, the crust is found to have three layers with P wave velocities ( V p ) of 6.0–6.3, 6.3–6.6, and 6.9–7.0 km/s, respectively. The southern half of the profile, including the eastern Tianshan Mountains and eastern margin of the Tarim basin, shows low P wave velocities and σ = 0.25 to a depth of 30 km, which suggests a quartz‐rich, granitic upper crustal composition. The northern half of the profile below the Altai Mountains and Junggar Accretional Belt has a higher Poisson's ratio of σ = 0.26–0.27 to a depth of 30 km, indicative of an intermediate crustal composition. The entire 1100‐km‐long profile is underlain by a 15–30 km thick high velocity (6.9–7.0 km/s; σ = 0.26–0.28) lower‐crustal layer that we interpret to have a bulk composition of mafic granulite. At the southern end of the profile, a 5‐km‐thick midcrustal low‐velocity layer ( V p = 5.9 km/s, σ = 0.25) underlies the Tianshan and the region to the south, and may be indicative of a near‐horizontal detachment interface. P n velocities are ∼7.7–7.8 km/s between the Tianshan and the Junggar basin, and ∼7.9–8.0 km/s below the Altai Mountains and eastern margin of the Tarim basin. We interpret the consistent three‐layer stratification of the crust to indicate that the crust has undergone partial melting and differentiation after Paleozoic terrane accretion. The thickness (50 km) of the crust appears to be related to compression resulting from the Indo‐Asian collision.

Altai Mountains↗
USGS2002

Strain accumulation and rotation in western Nevada, 1993-2000

The positions of 44 GPS monuments in an array extending from the Sierra Nevada at the latitude of Reno to near Austin, Nevada, have been measured several times in the 1993–2000 interval. The western half of the array spans the Walker Lane belt, whereas the eastern half spans the central Nevada seismic zone (CNSZ). The principal strain rates in the Walker Lane belt are 29.6 ± 5.3 nstrain yr −1 N88.4°E ± 5.4° and −12.8 ± 6.0 nanostrain yr −1 N01.6°W ± 5.4°, extension reckoned positive, and the clockwise (as seen from above the Earth) rotation rate about a vertical axis is 13.6 ± 4.0 nrad yr −1 . The quoted uncertainties are standard deviations. The motion in the Walker Lane belt can then be represented by a zone striking N35°W subject to 16.8 ± 4.9 nstrain yr −1 extension perpendicular to it and 19.5 ± 4.0 nstrain yr −1 right-lateral, simple shear across it. The N35°W strike of the zone is the same as the direction of the local tangent to the small circle drawn about the Pacific-North America pole of rotation. The principal strain rates for the CNSZ are 46.2 ± 11.0 nstrain yr −1 N49.9°W ± 6.0° and −13.6 ± 6.1 nstrain yr −1 N40.1°E ± 6.0°, and the clockwise rotation rate about a vertical axis is 20.3 ± 6.3 nrad yr −1 . The motion across the CNSZ can then be represented by a zone striking N12°E subject to 32.6 ± 11.0 nstrain yr −1 extension perpendicular to it and 25.1 ± 6.3 nstrain yr −1 right-lateral, simple shear across it. The N12°E strike of the zone is similar to the strikes of the faults (Rainbow Mountain, Fairview Peak, and Dixie Valley) within it.

California, Nevada↗
USGS2002

Plume-driven plumbing and crustal formation in Iceland

Through combination of surface wave and body wave constraints we derive a three-dimensional (3-D) crustal S velocity model and Moho map for Iceland. It reveals a vast plumbing system feeding mantle plume melt into upper crustal magma chambers where crustal formation takes place. The method is based on the partitioned waveform inversion to which we add additional observations. Love waves from six local events recorded on the HOTSPOT- SIL networks are fitted, S n travel times from the same events measured, previous observations of crustal thickness are added, and all three sets of constraints simultaneously inverted for our 3-D model. In the upper crust (0–15 km) an elongated low-velocity region extends along the length of the Northern, Eastern and Western Neovolcanic Zones. The lowest velocities (−7%) are found at 5–10 km below the two most active volcanic complexes: Hekla and Bárdarbunga-Grímsvötn. In the lower crust (>15 km) the low-velocity region can be represented as a vertical cylinder beneath central Iceland. The low-velocity structure is interpreted as the thermal halo of pipe work which connects the region of melt generation in the uppermost mantle beneath central Iceland to active volcanoes along the neovolcanic zones. Crustal thickness in Iceland varies from 15–20 km beneath the Reykjanes Peninsula, Krafla and the extinct Snæfellsnes rift zone, to 46 km beneath central Iceland. The average crustal thickness is 29 km. The variations in thickness can be explained in terms of the temporal variation in plume productivity over the last ∼20 Myr, the Snæfellsnes rift zone being active during a minimum in plume productivity. Variations in crustal thickness do not depart significantly from an isostatically predicted crustal thickness. The best fit linear isostatic relation implies an average density jump of 4% across the Moho. Rare earth element inversions of basalt compositions on Iceland suggest a melt thickness (i.e., crustal thickness) of 15–20 km, given passive upwelling. The observed crustal thickness of up to 46 km implies active fluxing of source material through the melt zone by the mantle plume at up to 3 times the passive rate.

Journal of Geophysical Research B: Solid Earth↗
USGS2002

Imaging the mantle beneath Iceland using integrated seismological techniques

Using a combination of body wave and surface wave data sets to reveal the mantle plume and plume head, this study presents a tomographic image of the mantle structure beneath Iceland to 400 km depth. Data comes primarily from the PASSCAL-HOTSPOT deployment of 30 broadband instruments over a period of 2 years, and is supplemented by data from the SIL and ICEMELT networks. Three sets of relative teleseismic body wave arrival times are generated through cross correlation: S and SKS arrivals at 0.03–0.1 Hz, and P and PKIKP arrivals at 0.03–0.1 and 0.8–2.0 Hz. Prior to inversion the crustal portion of the travel time anomalies is removed using the crustal model ICECRTb. This step has a significant effect on the mantle velocity variations imaged down to a depth of ∼250 km. Inversion of relative arrival times only provides information on lateral velocity variations. Surface waves are therefore used to provide absolute velocity information for the uppermost mantle beneath Iceland. The average wave number for the Love wave fundamental mode at 0.020 and 0.024 Hz is measured and used to invert for the average S velocity. Combination of the body wave and surface wave information reveals a predominantly horizontal low-velocity anomaly extending from the Moho down to ∼250 km depth, interpreted as a plume head. Below the plume head a near-cylindrical low-velocity anomaly with a radius of ∼100 km and peak V P and V S anomalies of −2% and −4%, respectively, extends down to the maximum depth of resolution at 400 km. Within the plume head, in the uppermost mantle above the core of the plume, there is a relatively high velocity with a maximum V P and V S anomaly of +2%. This high-velocity anomaly may be the result of the extreme degree of melt extraction necessary to generate the thick (46 km) crust in central Iceland. Comparison of the plume volumetric flux implied by our images, the crustal generation rate, and the degree of melting suggested by rare earth element inversions, suggests that (1) mantle material must be flowing horizontally away from the plume core faster than the overlying lithosphere and (2) the bulk of the plume material does not participate in melting beneath Iceland.

Journal of Geophysical Research B: Solid Earth↗
USGS2002

The 12 September 1999 Upper East Rift Zone dike intrusion at Kilauea Volcano, Hawaii

Deformation associated with an earthquake swarm on 12 September 1999 in the Upper East Rift Zone of Kilauea Volcano was recorded by continuous GPS receivers and by borehole tiltmeters. Analyses of campaign GPS, leveling data, and interferometric synthetic aperture radar (InSAR) data from the ERS-2 satellite also reveal significant deformation from the swarm. We interpret the swarm as resulting from a dike intrusion and model the deformation field using a constant pressure dike source. Nonlinear inversion was used to find the model that best fits the data. The optimal dike is located beneath and slightly to the west of Mauna Ulu, dips steeply toward the south, and strikes nearly east-west. It is approximately 3 by 2 km across and was driven by a pressure of ∼15 MPa. The total volume of the dike was 3.3 × 10 6 m 3 . Tilt data indicate a west to east propagation direction. Lack of premonitory inflation of Kilauea's summit suggests a passive intrusion; that is, the immediate cause of the intrusion was probably tensile failure in the shallow crust of the Upper East Rift Zone brought about by persistent deep rifting and by continued seaward sliding of Kilauea's south flank.

Hawaii↗
USGS2002

Strain accumulation and rotation in western Oregon and southwestern Washington

Velocities of 75 geodetic monuments in western Oregon and southwestern Washington extending from the coast to more than 300 km inland have been determined from GPS surveys over the interval 1992–2000. The average standard deviation in each of the horizontal velocity components is ∼1 mm yr −1 . The observed velocity field is approximated by a combination of rigid rotation (Euler vector relative to interior North America: 43.40°N ± 0.14°, 119.33°W ± 0.28°, and 0.822 ± 0.057° Myr −1 clockwise; quoted uncertainties are standard deviations), uniform regional strain rate (ε EE = −7.4 ± 1.8, ε EN = −3.4 ± 1.0, and ε NN = −5.0 ± 0.8 nstrain yr −1 , extension reckoned positive), and a dislocation model representing subduction of the Juan de Fuca plate beneath North America. Subduction south of 44.5°N was represented by a 40‐km‐wide locked thrust and subduction north of 44.5°N by a 75‐km‐wide locked thrust.

Oregon, Washington↗
USGS2002

High-resolution image of Calaveras Fault seismicity

By measuring relative earthquake arrival times using waveform cross correlation and locating earthquakes using the double difference technique, we are able to reduce hypocentral errors by 1 to 2 orders of magnitude over routine locations for nearly 8000 events along a 35-km section of the Calaveras Fault. This represents ∼92% of all seismicity since 1984 and includes the rupture zone of the M 6.2 1984 Morgan Hill, California, earthquake. The relocated seismicity forms highly organized structures that were previously obscured by location errors. There are abundant repeating earthquake sequences as well as linear clusters of earthquakes. Large voids in seismicity appear with dimensions of kilometers that have been aseismic over the 30-year time interval, suggesting that these portions of the fault are either locked or creeping. The area of greatest slip in the Morgan Hill main shock coincides with the most prominent of these voids, suggesting that this part of the fault may be locked between large earthquakes. We find that the Calaveras Fault at depth is extremely thin, with an average upper bound on fault zone width of 75 m. Given the location error, however, this width is not resolvably different from zero. The relocations reveal active secondary faults, which we use to solve for the stress field in the immediate vicinity of the Calaveras Fault. We find that the maximum compressive stress is at a high angle, only 13° from the fault normal, supporting previous interpretations that this fault is weak.

California↗
USGS2002

Crustal structure and relocated earthquakes in the Puget Lowland, Washington, from high-resolution seismic tomography

The availability of regional earthquake data from the Pacific Northwest Seismograph Network (PNSN), together with active source data from the Seismic Hazards Investigation in Puget Sound (SHIPS) seismic experiments, has allowed us to construct a new high-resolution 3-D, P wave velocity model of the crust to a depth of about 30 km in the central Puget Lowland. In our method, earthquake hypocenters and velocity model are jointly coupled in a fully nonlinear tomographic inversion. Active source data constrain the upper 10–15 km of the model, and earthquakes constrain the deepest portion of the model. A number of sedimentary basins are imaged, including the previously unrecognized Muckleshoot basin, and the previously incompletely defined Possession and Sequim basins. Various features of the shallow crust are imaged in detail and their structural transitions to the mid and lower crust are revealed. These include the Tacoma basin and fault zone, the Seattle basin and fault zone, the Seattle and Port Ludlow velocity highs, the Port Townsend basin, the Kingston Arch, and the Crescent basement, which is arched beneath the Lowland from its surface exposure in the eastern Olympics. Strong lateral velocity gradients, consistent with the existence of previously inferred faults, are observed, bounding the southern Port Townsend basin, the western edge of the Seattle basin beneath Dabob Bay, and portions of the Port Ludlow velocity high and the Tacoma basin. Significant velocity gradients are not observed across the southern Whidbey Island fault, the Lofall fault, or along most of the inferred location of the Hood Canal fault. Using improved earthquake locations resulting from our inversion, we determined focal mechanisms for a number of the best recorded earthquakes in the data set, revealing a complex pattern of deformation dominated by general arc-parallel regional tectonic compression. Most earthquakes occur in the basement rocks inferred to be the lower Tertiary Crescent formation. The sedimentary basins and the eastern part of the Olympic subduction complex are largely devoid of earthquakes. Clear association of hypocenters and focal mechanisms with previously mapped or proposed faults is difficult; however, seismicity, structure, and focal mechanisms associated with the Seattle fault zone suggest a possible high-angle mode of deformation with the north side up. We suggest that this deformation may be driven by isostatic readjustment of the Seattle basin.

Washington↗
USGS2003

Consequences of viscous drag beneath a transform fault

A transform fault is modeled as a vertical cut through an elastic layer (schizosphere) of thickness overlying a viscous substrate (plastosphere). We consider a steady transform motion accommodated in the schizosphere wholly by slip on the fault and in the plastosphere, insofar as possible, by viscous flow. For the case where the viscosity in the plastosphere is strain rate dependent but independent of temperature, the velocity solution in the plastosphere is θ/π, where is the slip rate on the fault in the schizosphere and and θ are the cylindrical coordinates with the origin at the bottom of the fault. The viscous stress is singular at the bottom of the fault ( = 0) and exceeds the brittle (frictional) strength for . Equating the brittle strength to the viscous stress defines the brittle–ductile boundary in the plastosphere as a function of and viscosity. The additional condition that must be small allows the viscosity to be estimated from . For small , the temperature‐independent solution is a valid approximation to the temperature‐dependent solution, and the relation between viscosity and should remain valid. From the temperature‐independent model, we estimate that self‐heating due to dissipation in the plastosphere for reasonable Earth parameters is less than ∼20°C.

Journal of Geophysical Research↗
USGS2002

Prehistoric ruptures of the Gurvan Bulag fault, Gobi Altay, Mongolia

The 1957 Gobi Altay M8.3 earthquake in southern Mongolia was associated with the simultaneous rupture of several faults, including the Gurvan Bulag reverse fault, which is located about 25 km south of the main strike-slip Bogd fault. Our study of paleoseismic excavations across the Gurvan Bulag fault suggests that the penultimate surface rupture occurred after 6.0 ka, most likely between 2.6 and 4.4 ka, and a possible earlier rupture occurred after 7.3 ka. Our interpretation of the stratigraphic relations in one of the exposures suggests that at least five earthquakes have generated surface rupture of the Gurvan Bulag fault since the abandonment of an ancient alluvial fan surface. Luminescence dating of sediment associated with this surface indicates that it formed either 26.6 ± 2.1 ka or 16.1 ± 2.0 ka. These data imply that the recurrence intervals for surface faulting on the Gurvan Bulag and Bogd faults are similar, on the order of several thousands of years, but that the penultimate surface ruptures of the two faults did not occur during the same earthquake.

Gobi Altay↗
USGS2002

Preeruptive inflation and surface interferometric coherence characteristics revealed by satellite radar interferometry at Makushin Volcano, Alaska: 1993-2000

Pilot reports in January 1995 and geologic field observations from the summer of 1996 indicate that a relatively small explosive eruption of Makushin, one of the more frequently active volcanoes in the Aleutian arc of Alaska, occurred on 30 January 1995. Several independent radar interferograms that each span the time period from October 1993 to September 1995 show evidence of ???7 cm of uplift centered on the volcano's east flank, which we interpret as preeruptive inflation of a ???7-km-deep magma source (??V = 0.022 km3). Subsequent interferograms for 1995-2000, a period that included no reported eruptive activity, show no evidence of additional ground deformation. Interferometric coherence at C band is found to persist for 3 years or more on lava flow and other rocky surfaces covered with short grass and sparsely distributed tall grass and for at least 1 year on most pyroclastic deposits. On lava flow and rocky surfaces with dense tall grass and on alluvium, coherence lasts for a few months. Snow and ice surfaces lose coherence within a few days. This extended timeframe of coherence over a variety of surface materials makes C band radar interferometry an effective tool for studying volcano deformation in Alaska and other similar high-latitude regions.

Journal of Geophysical Research B: Solid Earth↗