SEARCH · USGS Science

Results for “Journal of Geophysical Research – Earth Surface”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22Linked to original sources

USGS2008

Meteorites on Mars observed with Mars Exploration Rovers

Reduced weathering rates due to the lack of liquid water and significantly greater typical surface ages should result in a higher density of meteorites on the surface of Mars compared to Earth. Several meteorites were identified among the rocks investigated during Opportunity's traverse across the sandy Meridiani plains. Heat Shield Rock is a IAB iron meteorite and has been officially recognized as 'Meridiani Planum.' Barberton is olivine-rich and contains metallic Fe in the form of kamacite, suggesting a meteoritic origin. It is chemically most consistent with a mesosiderite silicate clast. Santa Catarina is a brecciated rock with a chemical and mineralogical composition similar to Barberton. Barberton, Santa Catarina, and cobbles adjacent to Santa Catarina may be part of a strewn field. Spirit observed two probable iron meteorites from its Winter Haven location in the Columbia Hills in Gusev Crater. Chondrites have not been identified to date, which may be a result of their lower strengths and probability to survive impact at current atmospheric pressures. Impact craters directly associated with Heat Shield Rock, Barberton, or Santa Catarina have not been observed, but such craters could have been erased by eolian-driven erosion.

Journal of Geophysical Research E: Planets↗

USGS1999

Stress transfer by the 1988-1989 M=5.3 and 5.4 Lake Elsman foreshocks to the Loma Prieta fault: Unclamping at the site of peak mainshock slip

We study the stress transferred by the June 27, 1988, M = 5.3 and August 8, 1989, M = 5.4 Lake Elsman earthquakes, the largest events to strike within 15 km of the future Loma Prieta rupture zone during 74 years before the 1989 M = 6.9 Loma Prieta earthquake. We find that the first Lake Elsman event brought the rupture plane of the second event 0.3–1.6 bars (0.03–0.16 MPa) closer to Coulomb failure but that the Lake Elsman events did not bring the future Loma Prieta hypocentral zone closer to failure. Instead, the Lake Elsman earthquakes are calculated to have reduced the normal stress on (or “undamped”) the Loma Prieta rupture surface by 0.5–1.0 bar (0.05–0.10 MPa) at the site where the greatest slip subsequently occurred in the Loma Prieta earthquake. This association between the sites of peak unclamping and slip suggests that the Lake Elsman events did indeed influence the Loma Prieta rupture process. Unclamping the fault would have locally lowered the resistance to sliding. Such an effect could have been enhanced if the lowered normal stress permitted fluid infusion into the undamped part of the fault. Although less well recorded, the M L = 5.0 1964 and M L = 5.3 1967 Corralitos events struck within 10 km of the southwest end of the future Loma Prieta rupture. No similar relationship between the normal stress change and subsequent Loma Prieta slip is observed, although the high-slip patch southwest of the Loma Prieta epicenter corresponds roughly to the site of calculated Coulomb stress increase for a low coefficient of friction. The Lake Elsman-Loma Prieta result is similar to that for the 1987 M = 6.2 Elmore Ranch and M = 6.7 Superstition Hills earthquakes, suggesting that foreshocks might influence the distribution of mainshock slip rather than the site of mainshock nucleation.

Journal of Geophysical Research B: Solid Earth↗

USGS2011

Field Reconnaissance Geologic Mapping of the Columbia Hills, Mars: Results from MER Spirit and MRO HiRISE Observations

Chemical, mineralogic, and lithologic ground truth was acquired for the first time on Mars in terrain units mapped using orbital Mars Reconnaissance Orbiter's High Resolution Imaging Science Experiment (MRO HiRISE) image data. Examination of several dozen outcrops shows that Mars is geologically complex at meter length scales, the record of its geologic history is well exposed, stratigraphic units may be identified and correlated across significant areas on the ground, and outcrops and geologic relationships between materials may be analyzed with techniques commonly employed in terrestrial field geology. Despite their burial during the course of Martian geologic time by widespread epiclastic materials, mobile fines, and fall deposits, the selective exhumation of deep and well-preserved geologic units has exposed undisturbed outcrops, stratigraphic sections, and structural information much as they are preserved and exposed on Earth. A rich geologic record awaits skilled future field investigators on Mars. The correlation of ground observations and orbital images enables construction of a corresponding geologic reconnaissance map. Most of the outcrops visited are interpreted to be pyroclastic, impactite, and epiclastic deposits overlying an unexposed substrate, probably related to a modified Gusev crater central peak. Fluids have altered chemistry and mineralogy of these protoliths in degrees that vary substantially within the same map unit. Examination of the rocks exposed above and below the major unconformity between the plains lavas and the Columbia Hills directly confirms the general conclusion from remote sensing in previous studies over past years that the early history of Mars was a time of more intense deposition and modification of the surface. Although the availability of fluids and the chemical and mineral activity declined from this early period, significant later volcanism and fluid convection enabled additional, if localized, chemical activity.

Journal of Geophysical Research E: Planets↗

USGS2001

Seismic mapping of shallow fault zones in the San Gabriel Mountains from the Los Angeles Region Seismic Experiment, southern California

During the Los Angeles Region Seismic Experiment (LARSE), a reflection/refraction survey was conducted along a profile (line 1) extending from Seal Beach, California, northeastward to the Mojave Desert and crossing the Los Angeles and San Gabriel Valley basins and San Gabriel Mountains. In most shot gathers from the southern and central San Gabriel Mountains, clear secondary arrivals are seen that merge, or appear to merge, with first arrivals at three locations, including the location of the Vincent thrust fault, an exposed late Mesozoic/early Cenozoic megathrust. These secondary arrivals are interpretable as reflections in the shallow crust (<5 km depth) from a concave-upward interface that projects to the surface in the north near the Vincent thrust fault, is offset in its central part at the San Gabriel fault (an old branch of the San Andreas fault), and terminates in the south at 1 to 2 km depth at the southern mountain front. The velocity structure above and below this interface strongly suggests it is the Vincent thrust fault: intermediate velocities (6.2 km/s), consistent with mylonites overlying the Vincent thrust fault, are observed above it; lower velocities (5.8 km/s), consistent with the Pelona Schist underlying the Vincent thrust fault, are observed below it. Problems arise, however, in attempting to match this reflector to the exposed Vincent thrust fault, which is seen in outcrops east of line 1. The Vincent thrust fault is shallower than the reflector in most places. An unmapped structure (steep fault, monocline, or thrust fault) is required between line 1 and the outcrops that either drops the Vincent thrust fault down to the depths of the reflector or repeats the Vincent thrust fault beneath line 1 in the footwall of another thrust fault. An alternative interpretation of the reflector is a deep greenstone horizon within the Pelona Schist, although this alternative is not favored by the velocity structure. Copyright 2001 by the American Geophysical Union.

California↗

USGS2012

Hydrologic effects on water level changes associated with episodic fault creep near Parkfield, California

As part of the Parkfield, California, earthquake prediction experiment, water level is monitored in a well 460 m from the main trace of the San Andreas fault on Middle Mountain, in the preparation zone of the anticipated Parkfield earthquake. The well configuration allows water level to be monitored in two fluid reservoirs at depths of 85 and 250 m below land surface. During 1987, water level changes were recorded during 12 of the 18 episodes of accelerated fault creep detected by a creep meter spanning the fault trace 750 m northwest of the well. The creep-related water level changes in the shallow reservoir have durations of less than 1 day, whereas in the deeper reservoir the changes persist for as long as 2 months. These data suggest that the transient nature of the water level changes in the shallow interval is due to vertical flow to the water table and is not evidence that creep events propagate past the well. Phase leads of earth tidal constituents in the water level data from the shallow interval relative to the same constituents in the local volume strain tide support the interpretation of significant flow to the water table at periods of 1 day or less. The form of the water level changes in the deep interval is affected by horizontal flow to the well bore. This effect can be removed from the water level records using a theoretical response curve constrained by the phases of earth tidal constituents in the deep interval relative to the local volume strain tide. For the events where the signal in the shallow interval has been large enough to measure, the sizes of the simultaneous water level changes in the two reservoirs are consistent with the same amounts of volume strain occurring at both depths.

Journal of Geophysical Research Solid Earth↗

USGS2016

Insights into shallow magmatic processes at Kīlauea Volcano, Hawaiʻi, from a multiyear continuous gravity time series

Continuous gravity data collected near the summit eruptive vent at Kīlauea Volcano, Hawaiʻi, during 2011–2015 show a strong correlation with summit-area surface deformation and the level of the lava lake within the vent over periods of days to weeks, suggesting that changes in gravity reflect variations in volcanic activity. Joint analysis of gravity and lava level time series data indicates that over the entire time period studied, the average density of the lava within the upper tens to hundreds of meters of the summit eruptive vent remained low—approximately 1000–1500 kg/m 3 . The ratio of gravity change (adjusted for Earth tides and instrumental drift) to lava level change measured over 15 day windows rose gradually over the course of 2011–2015, probably reflecting either (1) a small increase in the density of lava within the eruptive vent or (2) an increase in the volume of lava within the vent due to gradual vent enlargement. Superimposed on the overall time series were transient spikes of mass change associated with inflation and deflation of Kīlauea's summit and coincident changes in lava level. The unexpectedly strong mass variations during these episodes suggest magma flux to and from the shallow magmatic system without commensurate deformation, perhaps indicating magma accumulation within, and withdrawal from, void space—a process that might not otherwise be apparent from lava level and deformation data alone. Continuous gravity data thus provide unique insights into magmatic processes, arguing for continued application of the method at other frequently active volcanoes.

Hawaii↗

USGS2010

Rheologic and structural controls on the deformation of Okmok volcano, Alaska: FEMs, InSAR, and ambient noise tomography

Interferometric synthetic aperture radar (InSAR) data indicate that the caldera of Okmok volcano, Alaska, subsided more than a meter during its eruption in 1997. The large deformation suggests a relatively shallow magma reservoir beneath Okmok. Seismic tomography using ambient ocean noise reveals two low‐velocity zones (LVZs). The shallow LVZ corresponds to a region of weak, fluid‐saturated materials within the caldera and extends from the caldera surface to a depth of 2 km. The deep LVZ clearly indicates the presence of the magma reservoir beneath Okmok that is significantly deeper (>4 km depth) compared to previous geodetic‐based estimates (3 km depth). The deep LVZ associated with the magma reservoir suggests magma remains in a molten state between eruptions. We construct finite element models (FEMs) to simulate deformation caused by mass extraction from a magma reservoir that is surrounded by a viscoelastic rind of country rock embedded in an elastic domain that is partitioned to account for the weak caldera materials observed with tomography. This configuration allows us to reduce the estimated magma reservoir depressurization to within lithostatic constraints, while simultaneously maintaining the magnitude of deformation required to predict the InSAR data. More precisely, the InSAR data are best predicted by an FEM simulating a rind viscosity of 7.5 × 10 16 Pa s and a mass flux of −4.2 × 10 9 kg/d from the magma reservoir. The shallow weak layer within the caldera provides a coeruption stress regime and neutral buoyancy horizon that support lateral magma propagation from the central magma reservoir to extrusion near the rim of the caldera.

Alaska↗

USGS1997

Färoe-Iceland Ridge Experiment: 1. Crustal structure of northeastern Iceland

Results from the Färoe-Iceland Ridge Experiment (FIRE) constrain the crustal thickness as 19 km under the Northern Volcanic Zone of Iceland and 35 km under older Tertiary areas of northeastern Iceland. The Moho is defined by strong P wave and S wave reflections. Synthetic seismogram modeling of the Moho reflection indicates mantle velocities of at least 8.0 km/s beneath the Tertiary areas of northeastern Iceland and at least 7.9 km/s beneath the neovolcanic zone. Crustal diving rays resolve the structure of the upper and lower crust. Surface P wave velocities are 1.1–4.0 km/s in Quaternary rocks and are rather higher, 4.4–4.7 km/s, in the Tertiary basalts that outcrop elsewhere. The highest crustal P wave velocities observed directly from diving rays are 7.1 km/s, from rays that turn at 24 km depth. Velocities of 7.35 km/s at the base of the crust are inferred from extrapolation of the lower crustal velocity gradient (0.024 s −1 ). A Poisson's ratio of approximately 0.27, equivalent to an S wave to P wave travel time ratio of 1.78, is measured throughout the crust east of the neovolcanic zone. The Poisson's ratio and the steep Moho topography (in places up to 30° from the horizontal) indicate that the entire crust outside the neovolcanic zone is cool (<800°C). Gravity data are well matched by a velocity/density conversion of our seismic crustal model and indicate a region of low mantle density beneath the neovolcanic zone, believed to be due to elevated mantle temperatures. The crustal thickness in the neovolcanic zone is consistent with geochemical estimates of the melt generation, placing constraints on the flow within the Iceland mantle plume.

Journal of Geophysical Research B: Solid Earth↗

USGS2017

Integrated geophysical characteristics of the 2015 Illapel, Chile, earthquake

On 16 September 2015, a Mw 8.3 earthquake ruptured the subduction zone offshore of Illapel, Chile, generating an aftershock sequence with 14 Mw 6.0–7.0 events. A double source W phase moment tensor inversion consists of a Mw 7.2 subevent and the main Mw 8.2 phase. We determine two slip models for the mainshock, one using teleseismic broadband waveforms and the other using static GPS and InSAR surface displacements, which indicate high slip north of the epicenter and west-northwest of the epicenter near the oceanic trench. These models and slip distributions published in other studies suggest spatial slip uncertainties of ~25 km and have peak slip values that vary by a factor of 2. We relocate aftershock hypocenters using a Bayesian multiple-event relocation algorithm, revealing a cluster of aftershocks under the Chilean coast associated with deep (20–45 km depth) mainshock slip. Less vigorous aftershock activity also occurred near the trench and along strike of the main aftershock region. Most aftershocks are thrust-faulting events, except for normal-faulting events near the trench. Coulomb failure stress change amplitudes and signs are uncertain for aftershocks collocated with deeper mainshock slip; other aftershocks are more clearly associated with loading from the mainshock. These observations reveal a frictionally heterogeneous interface that ruptured in patches at seismogenic depths (associated with many aftershocks) and with homogeneous slip (and few aftershocks) up to the trench. This event likely triggered seismicity separate from the main slip region, including along-strike events on the megathrust and intraplate extensional events.

Illapel↗

USGS2002

Lower crustal deformation beneath the central Transverse Ranges, southern California: Results from the Los Angeles Region Seismic Experiment

We present a P wave velocity model derived from active source seismic data collected during the 1994 Los Angeles Region Seismic Experiment. Our model extends previously published upper crustal velocity models to mantle depths. Our model was developed by both ray tracing through a layered model and calculating travel times through a gridded model. It includes an 8-km-thick crustal root centered beneath the surface trace of the San Andreas fault, north of the highest topography in the San Gabriel Mountains. A simple mass balance calculation suggests that ∼36 km of north-south shortening across the San Andreas fault in the central Transverse Ranges could have formed this root. If north-south compression began when the “Big Bend” in the San Andreas fault formed at ∼5 Ma, 36 km of shortening implies a north-south contraction rate of ∼7.1 mm/yr across the central Transverse Ranges. If, instead, north-south compression began when the Transverse Ranges formed at 3.4–3.9 Ma, 36 km of shortening implies a contraction rate of 9.2–10.6 mm/yr. North of the San Andreas fault, the Mojave Desert crust has a low-velocity (6.3 km/s) mid and lower crust and a 28-km-deep Moho. South of the San Andreas fault, beneath the Los Angeles and San Gabriel Valley basins, there is a fast (6.6–6.8 km/s), thick (10–12 km) lower crust with a 27-km-deep Moho. Farther south still, the lower crust of the Continental Borderland is fast (6.6–6.8 km/s) and thin (5 km) with a shallow (22 km deep) Moho.

California↗

USGS1996

Stress/strain changes and triggered seismicity at The Geysers, California

The principal results of this study of remotely triggered seismicity in The Geysers geothermal field are the demonstration that triggering (initiation of earthquake failure) depends on a critical strain threshold and that the threshold level increases with decreasing frequency, or, equivalently, depends on strain rate. This threshold function derives from (1) analyses of dynamic strains associated with surface waves of the triggering earthquakes, (2) statistically measured aftershock zone dimensions, and (3) analytic functional representations of strains associated with power production and tides. The threshold is also consistent with triggering by static strain changes and implies that both static and dynamic strains may cause aftershocks. The observation that triggered seismicity probably occurs in addition to background activity also provides an important constraint on the triggering process. Assuming the physical processes underlying earthquake nucleation to be the same, Gomberg [this issue] discusses seismicity triggered by the M W 7.3 Landers earthquake, its constraints on the variability of triggering thresholds with site, and the implications of time delays between triggering and triggered earthquakes. Our results enable us to reject the hypothesis that dynamic strains simply nudge prestressed faults over a Coulomb failure threshold sooner than they would have otherwise. We interpret the rate-dependent triggering threshold as evidence of several competing processes with different time constants, the faster one(s) facilitating failure and the other(s) inhibiting it. Such competition is a common feature of theories of slip instability. All these results, not surprisingly, imply that to understand earthquake triggering one must consider not only simple failure criteria requiring exceedence of some constant threshold but also the requirements for generating instabilities.

Journal of Geophysical Research B: Solid Earth↗

USGS2012

A seismic refraction study of the Oregon Cascades

A 275‐km‐long reversed refraction profile in the Oregon Cascades, two shallow earthquakes of magnitude 5 in southern Washington, a shallow earthquake of magnitude 4.6 in northern California, and a previously published analysis of the Bouguer gravity field are used to develop a crustal P wave velocity model for the Oregon Cascades. Travel time analysis of the refraction profile indicates a crustal structure characterized by surface layers with P wave velocities that vary from 2.9 to 5.2 km/s and thicknesses that vary from 2.5 to 5.0 km, upper crustal velocities of 6.1 to 6.5 km/s between the depths of 3 and 29 km, lower crustal velocities near 7.0 km/s between the depths of 29 and 44 km, and a mantle reflector at a depth of 44 km. Comparison with synthetic seismograms supports this structure and shows that the lower crustal and Mono transitions can be better modeled by continuous velocity gradients than by first‐order discontinuities. Arrival times from two shallow earthquakes in southern Washington in 1981 across 14 telemetry stations in the Oregon Cascades show an apparent velocity of 7.62 km/s. On the basis of a previously published gravity analysis, the mean north‐south component of the dip to the crust‐mantle boundary is estimated at 1° down dip to the south. The apparent velocity from the earthquakes and the dip estimate from gravity indicate that the true Pn velocity is 7.70 km/s. Arrival times from a shallow earthquake in northern California in 1978 across telemetry stations in the Washington Cascades are consistent with this model and indicate that the upper mantle velocity reaches 8.20 km/s at a depth of approximately 100 km.

Oregon↗

USGS2002

Fault structure and mechanics of the Hayward Fault, California from double-difference earthquake locations

The relationship between small-magnitude seismicity and large-scale crustal faulting along the Hayward Fault, California, is investigated using a double-difference (DD) earthquake location algorithm. We used the DD method to determine high-resolution hypocenter locations of the seismicity that occurred between 1967 and 1998. The DD technique incorporates catalog travel time data and relative P and S wave arrival time measurements from waveform cross correlation to solve for the hypocentral separation between events. The relocated seismicity reveals a narrow, near-vertical fault zone at most locations. This zone follows the Hayward Fault along its northern half and then diverges from it to the east near San Leandro, forming the Mission trend. The relocated seismicity is consistent with the idea that slip from the Calaveras Fault is transferred over the Mission trend onto the northern Hayward Fault. The Mission trend is not clearly associated with any mapped active fault as it continues to the south and joins the Calaveras Fault at Calaveras Reservoir. In some locations, discrete structures adjacent to the main trace are seen, features that were previously hidden in the uncertainty of the network locations. The fine structure of the seismicity suggests that the fault surface on the northern Hayward Fault is curved or that the events occur on several substructures. Near San Leandro, where the more westerly striking trend of the Mission seismicity intersects with the surface trace of the (aseismic) southern Hayward Fault, the seismicity remains diffuse after relocation, with strong variation in focal mechanisms between adjacent events indicating a highly fractured zone of deformation. The seismicity is highly organized in space, especially on the northern Hayward Fault, where it forms horizontal, slip-parallel streaks of hypocenters of only a few tens of meters width, bounded by areas almost absent of seismic activity. During the interval from 1984 to 1998, when digital waveforms are available, we find that fewer than 6.5% of the earthquakes can be classified as repeating earthquakes, events that rupture the same fault patch more than one time. These most commonly are located in the shallow creeping part of the fault, or within the streaks at greater depth. The slow repeat rate of 2–3 times within the 15-year observation period for events with magnitudes around M = 1.5 is indicative of a low slip rate or a high stress drop. The absence of microearthquakes over large, contiguous areas of the northern Hayward Fault plane in the depth interval from ∼5 to 10 km and the concentrations of seismicity at these depths suggest that the aseismic regions are either locked or retarded and are storing strain energy for release in future large-magnitude earthquakes.

California↗

USGS2024

Hyperspectral imaging predicts differences in carbon and nitrogen status among representative biocrust functional groups of the Colorado Plateau

Biological soil crusts (biocrusts) are widespread soil photosynthetic communities covering about 12% of Earth's land surface and play crucial roles in terrestrial carbon (C) and nitrogen (N) cycles, yet scalable quantifications of biocrusts and their biogeochemical contributions are notably lacking. While remote sensing has enormous potential to assess, scale, and contextualize biocrusts and their functions, the applicability of hyperspectral data in predicting C- and N-related biocrust traits remains largely unexplored. We address this issue by evaluating the potential of in situ hyperspectral data to predict C and N across a range of biocrust species and different environmental conditions. We found that in situ hyperspectral reflectance measurements can be used to predict biocrust tissue C/N ratios and N concentrations with relatively high accuracy but to a lesser extent for potential biocrust N2 fixation rates. Critical wavelength domains included the visible region of the spectrum from roughly 490–600 nm, which most effectively captured variations in biocrust tissue C, and the shortwave infrared region from 1,150 to 1,350 nm and 1,550–1,650 nm, which most effectively captured biocrust tissue N and N2 fixation potential. Finally, we provide evidence that multi- and hyperspectral missions with targeted band placement, such as the proposed 26-band Landsat Next, could be effective in predicting biocrust traits. This work provides a critical step in understanding how to apply data from new and upcoming satellite missions to the monitoring of biocrusts.

Utah↗

USGS2002

Crustal structure and relocated earthquakes in the Puget Lowland, Washington, from high-resolution seismic tomography

The availability of regional earthquake data from the Pacific Northwest Seismograph Network (PNSN), together with active source data from the Seismic Hazards Investigation in Puget Sound (SHIPS) seismic experiments, has allowed us to construct a new high-resolution 3-D, P wave velocity model of the crust to a depth of about 30 km in the central Puget Lowland. In our method, earthquake hypocenters and velocity model are jointly coupled in a fully nonlinear tomographic inversion. Active source data constrain the upper 10–15 km of the model, and earthquakes constrain the deepest portion of the model. A number of sedimentary basins are imaged, including the previously unrecognized Muckleshoot basin, and the previously incompletely defined Possession and Sequim basins. Various features of the shallow crust are imaged in detail and their structural transitions to the mid and lower crust are revealed. These include the Tacoma basin and fault zone, the Seattle basin and fault zone, the Seattle and Port Ludlow velocity highs, the Port Townsend basin, the Kingston Arch, and the Crescent basement, which is arched beneath the Lowland from its surface exposure in the eastern Olympics. Strong lateral velocity gradients, consistent with the existence of previously inferred faults, are observed, bounding the southern Port Townsend basin, the western edge of the Seattle basin beneath Dabob Bay, and portions of the Port Ludlow velocity high and the Tacoma basin. Significant velocity gradients are not observed across the southern Whidbey Island fault, the Lofall fault, or along most of the inferred location of the Hood Canal fault. Using improved earthquake locations resulting from our inversion, we determined focal mechanisms for a number of the best recorded earthquakes in the data set, revealing a complex pattern of deformation dominated by general arc-parallel regional tectonic compression. Most earthquakes occur in the basement rocks inferred to be the lower Tertiary Crescent formation. The sedimentary basins and the eastern part of the Olympic subduction complex are largely devoid of earthquakes. Clear association of hypocenters and focal mechanisms with previously mapped or proposed faults is difficult; however, seismicity, structure, and focal mechanisms associated with the Seattle fault zone suggest a possible high-angle mode of deformation with the north side up. We suggest that this deformation may be driven by isostatic readjustment of the Seattle basin.

Washington↗

USGS2020

Geological and thermal control of the hydrothermal system in northern Yellowstone Lake: Inferences from high resolution magnetic surveys

A multiscale magnetic survey of the northern basin of Yellowstone Lake was undertaken in 2016 as part of the Hydrothermal Dynamics of Yellowstone Lake Project (HD‐YLAKE)—a broad research effort to characterize the cause‐and‐effect relationships between geologic and environmental processes and hydrothermal activity on the lake floor. The magnetic survey includes lake surface, regional aeromagnetic, and near‐bottom autonomous underwater vehicle (AUV) data. The study reveals a strong contrast between the northeastern lake basin, characterized by a regional magnetic low punctuated by stronger local magnetic lows, many of which host hydrothermal vent activity, and the northwestern lake basin with higher‐amplitude magnetic anomalies and no obvious hydrothermal activity or punctuated magnetic lows. The boundary between these two regions is marked by a steep gradient in heat flow and magnetic values, likely reflecting a significant structure within the currently active ~20‐km‐long Eagle Bay‐Lake Hotel fault zone that may be related to the ~2.08‐Ma Huckleberry Ridge caldera rim. Modeling suggests that the broad northeastern magnetic low reflects both a shallower Curie isotherm and widespread hydrothermal activity that has demagnetized the rock. Along the western lake shoreline are sinuous‐shaped, high‐amplitude magnetic anomaly highs, interpreted as lava flow fronts of upper units of the West Thumb rhyolite. The AUV magnetic survey shows decreased magnetization at the periphery of the active Deep Hole hydrothermal vent. We postulate that lower magnetization in the outer zone results from enhanced hydrothermal alteration of rhyolite by hydrothermal condensates while the vapor‐dominated center of the vent is less altered.

Wyoming↗

USGS2024

Brittle regime slip partitioned damage and deformation mechanisms along the eastern Denali fault zone in southwestern, Yukon

Rare bedrock exposures of the eastern Denali fault zone in southwestern Yukon allow for the measurement, sampling, and analyses of brittle regime fault slip data and deformation mechanisms to explore relations to far field, oblique plate motions. Host rock lithologies and associated slip surfaces show episodic damage zone‐related deformation and calcite ± hematite ± chlorite related hydrothermal fluid flow. This regional scale network of asymmetric fault damage is spatially and kinematically linked to a discrete and narrow fault core. Fault network observations, orientations, slip data, and strain inversions document a slip partitioned strike‐slip fault system with locally and mutually overprinting strike‐, oblique‐, and dip‐slip components. Microstructural analyses reveal crystal plastic and co‐seismic brittle deformation mechanisms active in a narrow range of upper crustal temperature, pressure, fluid, and chemical conditions. The net damage related slip is not exclusively formed by a single kinematic system, but rather a fully partitioned, time integrated system likely operative for much of the fault's brittle regime evolution temporally constrained by previously published thermochronometric data. Although the fault slip data was collected from outcrop‐scale exposures at sites tens of kilometers apart, results show remarkable correlation between fault kinematics and plate motions along the ∼580 km long eastern Denali fault segment. End member, subhorizontal, northeast directed reverse and north directed dextral strike slip fault strain axes closely reflect relative plate motion interactions over at least the last 30 m.y. and act as a proxy for far‐field stresses compatible with the kinematics of the damage zone network.

Alaska↗

USGS2015

Direct measurement of asperity contact growth in quartz at hydrothermal conditions

Earthquake recurrence requires interseismic fault restrengthening which results from solid state deformation in room-temperature friction and indentation experiments. In contrast exhumed fault zones show solution-transport processes such as pressure solution and contact overgrowths influence fault zone properties . In the absence of fluid flow, overgrowths are driven by gradients in surface curvature where material is dissolved, diffuses, and precipitates at the contact without convergence normal to the contact. To determine the rate of overgrowth for quartz, we conducted single contact experiments in an externally heated pressure vessel. Convergence was continuously monitored using reflected-light interferometry through a long-working-distance microscope. Contact normal force was constant with an initial effective normal stress of 1.7 MPa, temperature was between 350 and 530{degree sign}C, and water pressure was constant at 150 MPa. Two control experiments were conducted: one dry at 425{degree sign}C and one bi-material (sapphire) at 425{degree sign}C and 150 MPa water pressure. No contact growth or convergence was observed in the controls. For wet single-phase contacts, growth was initially rapid and then decreased with time. No convergence was observed. Fluid inclusions indicate that the contact is not uniformly wetted. The contact is bounded by small regions of high aperture, reflecting local free-face dissolution as the source for the overgrowth. The apparent activation energy is ~125 kJ/mol. Extrapolation predicts rates of contact area increase orders of magnitude faster than in dry, room-temperature and hydrothermal friction experiments, suggesting that natural strength recovery near the base of the seismogenic zone could be dominated by contact overgrowth.

Journal of Geophysical Research B: Solid Earth↗