SEARCH · USGS Science
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Natural aggregates, consisting of crushed stone, and sand and gravel, are a major contributor to economic health, and have an amazing variety of uses. Aggregates are among the most abundant mineral resources and are major basic raw materials used by construction, agriculture and other industries that employ complex chemical and metallurgical processes.
The kinds and quantities of minerals dissolved in the surface water of the Neches River basin result from such environmental factors as geology, streamflow patterns and characteristics, and industrial influences. As a result of high rainfall in the basin, much of the readily soluble material has been leached from the surface rocks and soils. Consequently, the water in the streams is usually low in concentrations of dissolved minerals and meets the U.S. Public Health Service drinking-water standards. In most streams the concentration of dissolved solids is less than 250 ppm (parts per million). The Neches River drains an area of about 10,000 square miles in eastern Texas. From its source in southeast Van Zandt County the river flows in a general southeasterly direction and empties into Sabine Lake, an arm of the Gulf of Mexico. In the basin the climate ranges from moist subhumid to humid, and the average annual rainfall ranges from 46 inches is the northwest to more than 52 inches in the southeast. Annual runoff from the basin has averaged 11 inches; however, runoff rates vary widely from year to year. The yearly mean discharge of the Neches River at Evadale has ranged from 994 to 12,720 cubic feet per second. The rocks exposed in the Neches River basin are of the Quaternary and Tertiary Systems and range in age from Eocene to Recent. Throughout most of the basin the geologic formations dip generally south and southeast toward the gulf coast. The rate of dip is greater than that of the land surface; and as a result, the older formations crop out to the north of the younger formations. Water from the outcrop areas of the Wilcox Group and from the older formations of the Claiborne Group generally has dissolved-solids concentrations ranging from 100 to 250 ppm; water from the younger formations has concentrations less than 100 ppm. The northern half of the basin has soft water, with less than 60 ppm hardness. The southern half of .the basin has very soft water, usually with less than 30 ppm hardness. The chloride concentrations are less than 20 ppm in surface water in the southern half of the basin and usually range from 20 to 100 ppm in the northern half of the basin. Concentrations greater than 100 ppm are found only where pollution is occurring. The Neches River basin has an abundance of surface water, but uneven distribution of runoff makes storage projects necessary to provide dependable water supplies. The principal existing reservoirs, with the exception of Striker Creek Reservoir, contain water of excellent quality. Chemical-quality data for the Striker Creek drainage area indicate that its streams are affected by .the disposal of brines associated with oil production. Sam Rayburn Reservoir began impounding water in 1965. The water impounded should prove of acceptable quality for most uses, but municipal and industrial wastes released into the Angelina River near Lufkin may have a degrading effect on the quality of the water, especially during extended periods of low flows. Water available for storage at the many potential reservoir sites will be of good quality; but, if the proposed salt-water barrier is to impound acceptable water, the disposal of oilfield brine into Pine Island Bayou should be discontinued.
The U.S. Geological Survey has responsibility in the U.S. Department of the Interior to assess the nation's energy and mineral resources. The evaluation of reserves and resources of a commodity such as lithium should be a continuing process in the light of advancing technology and ever-growing knowledge of its geologic occurrence and geochemical behavior. Although reserves of lithium vary with market demand because of the investment required to find, develop, and appraise an ore body, total resources are a function of the geologic occurrence and geochemical behavior of lithium. By studying known deposits and publishing data on their origin and occurrence, the U.S. Geological Survey can aid in the discovery of new deposits and improve the resource base. Resource data are used both by the government and the private sector. Government funding for research on energy-related technologies such as electric vehicle batteries and fusion power requires assurance that there will be enough lithium available in time for commercialization. Questions of availability for all mineral commodities must be answered by the U.S. Geological Survey so that intelligent decisions can be made.
When asked about wollastonite, most people respond “wollasta-what?” That’s because the wollastonite industry in the United States is relatively small and not highly publicized. Furthermore, the general public does not have any direct contact with wollastonite despite its use in many consumer products, ranging from car brakes to paint.
Undiscovered potash resources in the Central Asia Salt Basin (CASB) of Turkmenistan, Uzbekistan, Tajikistan, and Afghanistan were assessed as part of a global mineral resource assessment led by the U.S. Geological Survey. The term “potash” refers to potassium-bearing, water-soluble salts derived from evaporite basins, where seawater dried up and precipitated various salt compounds; the word for the element “potassium” is derived from potash. Potash is produced worldwide at amounts exceeding 30 million metric tons per year, mostly for use in fertilizers. The term “potash” is used by industry to refer to potassium chloride, as well as potassium in sulfate, nitrate, and oxide forms. For the purposes of this assessment, the term “potash” refers to potassium ores and minerals and potash ore grades. Resource and production values are usually expressed by industry in terms of K 2 O (potassium oxide) or muriate of potash (KCl, potassium chloride). The CASB hosts significant discovered potash resources and originated in an inland sea during Late Jurassic time. Seawater flowed into the CASB, mostly from its extreme northwestern margin near the modern Caspian Sea, during several evaporation episodes that deposited at least five different packages of evaporites, with virtually all potash in the second and fourth packages. In this study, the CASB was subdivided into three tracts (permissive areas) for evaluation: the Amu Darya tract in the west, the Gissar tract in the center, and the Afghan-Tajik tract in the east. The Gissar and Amu Darya tracts were quantitatively assessed, whereas the Afghan‑Tajik tract was only qualitatively assessed because of the commonly extreme depth (as deep as 7 km) of the Jurassic salt, extensive deformation, and a lack of known potash deposits. Two approaches were used to estimate amounts of undiscovered potash in the CASB. Stratabound evaporite deposits in the Amu Darya tract were evaluated using an Adaptive Geometric Estimation (AGE) approach, which estimates in-place potash volumes and tonnages. The Gissar tract was evaluated by using the AGE approach for stratabound deposits and the three-part form of assessment of Singer and Menzie (2005) for discrete halokinetic deposits. In the three-part form of assessment, numbers of undiscovered deposits were estimated and combined with grade and tonnage models to probabilistically forecast the amount of undiscovered potash. The Amu Darya tract is estimated to contain 38 billion metric tons of undiscovered potash as K 2 O by using the AGE approach for stratabound deposits. The hybrid stratabound-halokinetic Gissar tract is estimated to contain between 1 and 16 billion metric tons of undiscovered potash as K 2 O. Chapter 1 of this report provides an overview of the history of the CASB and summarizes evaporite potash deposition, halokinesis, and dissolution processes that have affected the current distribution of potash-bearing salt in the CASB. Chapter 2 describes the Gissar tract, an uplifted region that contains a mix of stratabound and halokinetic potash deposits and all of the discovered and exploited potash deposits of the CASB. Chapter 3 describes the Amu Darya tract, where evaporite deposits remain flat-lying and undeformed since their original deposition. Chapter 4 describes the highly deformed and compressed Afghan-Tajik tract and what is known of the deeply-buried Jurassic salt. Chapter 5 describes the spatial databases included with this report, which contain a collection of CASB potash information. Appendixes A and B summarize descriptive models for stratabound and halokinetic potash-bearing salt deposits, respectively. Appendix C summarizes the AGE method used to evaluate the Gissar and Amu Darya tracts. Appendixes D and E contain grade and thickness data for the Gissar and Amu Darya tracts. Appendix F provides the SYSTAT script used to estimate undiscovered K2 O in a CASB tract. Appendix G provides a potash glossary, and appendix H provides biographies of assessment participants.
The increasing global demand for critical minerals to support energy and technological advancement has accelerated exploration and research efforts for these essential resources. Since 2019, the United States Geological Survey (USGS) Earth Mapping Resources Initiative (EMRI) has worked to modernize geologic mapping of the Nation to better understand its critical mineral resources. To further this initiative, the USGS has flown a series of high-resolution airborne magnetic and radiometric surveys over large areas of the southern Midcontinent. The surveys cover known critical mineral deposits and areas with the potential to host additional critical minerals based on the presence of one or more overlapping mineral systems. One aspect of EMRI emphasizes close collaboration between the USGS and the Association of American State Geologists, as well as other government and industry partners to leverage geophysical, geological, and geochemical expertise on both regional and local scales. The EMRI high-resolution airborne survey data provide new insights into the geophysical framework of the southern Midcontinent and its critical mineral endowment. Additionally, discoveries made from the data have directed new studies for critical mineral exploration.
A few sources of basic data on worldwide raw materials production and consumption exist that are independently developed and freely available to the public. This column is an introduction to the types of information available from the U.S. Geological Survey (USGS), and explains how the data are assembled. The kind of information prepared by the USGS is essential to U.S. materials flow studies because the data make it possible to conduct these studies within a global context. The data include primary and secondary (scrap) production, consumption and stocks (mostly limited to the United States unless calculated), trade (not readily available for all countries), and prices for more than 80 mineral commodities. Materials flow studies by USGS specialists using these data are continuing (http://minerals.usgs.gov/minerals/mflow/). Figure 1 shows from where the data are collected and where they are used. Minerals information was downloaded by users 5.8 million times from USGS minerals information Web pages in 2008.
The mineral barite, barium sulfate, is the chief source of barium and its compounds needed for many industrial processes and products. Barite is found the world over and is abundant and widely distributed throughout the United States. The barite deposits of the United States (exclusive of Alaska and Hawaii) are shown on the accompanying map. The principal geologic type of deposit is indicated by the shape of symbol and the relative importance of the deposit is indicated by the size of symbol. This text lists localities by State, and index numbers are keyed to the map. Localities are distinguished by name of mine, prospect, or geographic area; their coordinates are given to the nearest minute of latitude and longitude. Geologic relations of each occurrence, if known, are summarized briefly. The text and map were compiled from published and unpublished information, and at least one reference is given for each locality, if reports have been published. The listings in some States are preceded by a principal reference which is a major source of information about deposits in those States.
Introduction Tantalum has a unique set of properties that make it useful in a number of diverse applications. The ability of the metal to store and release electrical energy makes it ideally suited for use in certain types of capacitors that are widely used in modern electronics. Approximately 60 percent of global tantalum consumption is in the electronics industry. The ductility and corrosion resistance of the metal lends itself to application in the chemical processing industry, and its high melting point and high strength retention at elevated temperatures make it an important component of super alloys used in aircraft engines. As a major industrialized nation, the United States is a leading consumer of tantalum and tantalum-containing products. Domestic deposits typically are of low grade, and no tantalum has been recovered from mining activities in the United States since 1959. Consequently, the United States is nearly completely reliant on imports to meet its domestic consumption of tantalum for economic and national security needs. The recovery of tantalum from mine production is economically viable in only a few countries. Although developed countries dominated tantalum mine production in the early 2000s, production today is dominated by countries in the Great Lakes Region of Africa. There is concern that the sales of minerals, including columbite-tantalite or “coltan,” a mineral from which tantalum is derived, have helped finance rebel groups accused of violating human rights as part of the continuing armed conflict in the Democratic Republic of the Congo (DRC) and neighboring countries. These accusations have prompted the passage of legislation in the United States to curb the procurement of these mineral commodities, referred to as “conflict minerals,” from the DRC. Specifically, section 1502 of the 2010 Dodd-Frank Wall Street Reform and Consumer Protection Act (Public Law 111–203, 124 Stat. 2213–2218) requires companies that source tantalum, tin, tungsten, and gold (3TG) to perform due diligence on their supply chains to determine if the materials they use originate from the DRC or adjoining countries (defined as sharing a border with the DRC). The DRC, Rwanda, and surrounding countries are not globally significant sources of tin, tungsten, or gold, accounting for only about 2 percent of the mined world supply for each of these elements. The region has, however, evolved to become the world’s largest producer of mined tantalum. A further complication of the production of tantalum stems from the opacity of the tantalum market. Unlike most base and precious metals, tantalum concentrates are not publicly traded through commodities exchanges but are bought and sold through networks of dealers and on contract between producers and consumers, some of whom may not provide accurate statistical data concerning the amounts, origins, and destination of the concentrates. Some price data can be found in trade journals or in other publications; however, there are no recognized official set exchange prices for either concentrate or tantalum metal. Because price is determined by negotiation between buyer and seller, published prices for concentrate are probably not representative of global prices paid for concentrate. The development of a mine-to-market supply-chain analysis is complicated and difficult because many of the industry participants that produce, trade, and consume tantalum do not publish statistical information, contracts are long term between miners and buyers, and much of the industry is vertically integrated. As a result of these and other considerations, tantalum is considered by many to be a “critical” commodity. This fact sheet identifies and addresses the major geographic shifts in the source of mine production of tantalum which have occurred over the past 15 years, some of the factors that drove this shift, and some of the related consequences. One of the activities of the U.S. Geological Survey National Minerals Information Center (USGS-NMIC) is to analyze global supply chains and characterize major components of mineral and material flows from ore extraction through processing to first tier products. These analyses support the core mission of the USGS-NMIC as the Federal entity responsible for the collection, analysis, and dissemination of objective, unbiased, factual information on minerals essential to the U.S. economy and national security.
Sixty samples of sediments from stream beds, outwash plains, and beaches were collected in Afghanistan, Iran, and Turkey by Fred L. Klinger, U.S. Bureau of Mines, as part of the field work undertaken by the National Geographic-Smithsonian Pyrotechnological Expedition of 1968. Facilities for the analysis of the samples for tin and other metals were not immediately available, but in 1973 arrangements were made for analyses to be made on a time-permitting basis in the U.S. Geological Survey. The original purpose in collecting the samples was to determine whether tin was present in amounts indicative of sources for tin ores used in antiquity for the manufacture of bronze. The results of the analyses not only permitted an evaluation of the potential for tin in the localities sampled, but also afforded chemical and mineralogical data that were interpretable in the context of regional potential for other elements of current industrial use. These include gold, base metals, ferro-alloy metals, beryllium, rare earths, and barium. The original 60 samples of sand were sieved to make three size fraction (>0.707 mm, <O.707->O.177 mm, and <0.177 mm) for spectrographic and chemical analysis. Splits of these fractions were used for replicate analyses to permit evaluation of the precision of the analytical procedures. Further splitting of the <0.707->0.177 mm sand gave fractions from each sample that were separated in bromoform. Concentrates from the heavy-liquid separations were divided magnetically into six parts from most magnetic to least magnetic. These concentrates were analyzed spectrographically. The precision of the spectrographic analyses is well within the limits of precision expected from semiquantitative procedures. Such precision allows semiquantitative spectrographic procedures to be used with confidence as a valuable tool for reconnaissance investigations in which multi-element analyses are necessary. The analyses of the various fractions of sediments and sediment concentrates indicate the sample media in which an element was most likely to occur. Tin exhibited no preferential concentration into any particular medium. However, many elements with which tin is associated, and other elements of industrial use, do concentrate into one or more of the sample media. This indication of a preferred medium permits interpretation of the analyses as to the best sample medium for a particular element in the environment of western Asia. Cassiterite and/or tin were detected in many samples from Afghanistan, Iran, and Turkey, but in most of the samples the tin was present in normal crustal abundance. Sixteen samples, including seven from Afghanistan, eight from Iran, and one from Turkey contain unusually large amounts of tin. The most notable areas of anomalous tin are near Mirzaka, Qala-i-Asad, and Shah Agha in Afghanistan; near Meshed, Shir Kuh, Natanz, Nodus, and Talmesi in Iran; and on the shore of the Balck Sea just west of Trabzon in Turkey. Even in these localities the tin appears to be a minor element associated with other ores. The most common association of tin is with copper at known mineralized areas. This relation may have historical significance in the context of the development of bronze. The results of the analyses provided geochemical data on the distribution of other elements of industrial use and clearly identified nine of the ten known mineral deposits represented by the samples. The known metallization at the reported deposits may be only a part of more complex groups of metals. In Afghanistan an array of anomalous elements at the known gold placers around Mirzaka and along the Anguri River signals the presence of complex ore deposits. These elements are silver, arsenic, gold, bismuth, cadmium, copper, mercury, indium, molybdenum, lead, antimony, tin, thallium, tungsten, and zinc. They may indicate a Carlin-type gold deposit in which the wall-rocks are enriched in micron-sized particles of gold. Other localities in Afghanistan signalled by the results of the analyses to be anomalous and to merit further geochemical exploration are: (1) a reach of the Panjshir River for beryllium, lead, zinc, chromium and nickel; (2) the area near Bamian for beryllium; (3) the Siakhak village area for gold and copper; (4) around Qala-i-Asad and Shah Agha for lead, zinc, gold, and tungsten. Some attention to the distribution of monazite around Siakhak, Shahjui, Qala-i-Asad, and Shah Agha is justified to determine if this ore mineral for the rare earths and thorium is enriched over its normally expectable trace as an accessory mineral in granitic rocks, pelitic schists, and gneisses. In Iran, the pluton of granodiorite porphyry near Sar Cheshmeh, an area where a huge porphyry copper deposit was being investigated by the Geological Survey of Iran when the present samples were collected in 1968, shows as a strong geochemical anomaly for copper and molybdenum. The granitic area near Meshed is geochemically enriched persistently in beryllium, tin, and barium, and locally in gold, lanthanum, niobium, yttrium, and other elements. This area deserves a thorough regional geochemical survey for beryl and nonberyl sources of beryllium, for fluorite, and for the ores of niobium, tin, barium, the rare earths, and thorium. Other localities in Iran that merit geochemical exploration on the basis of these data are: ;1) the areas between Tabas and Deyhuk, east of Naiband, and south of Naiband for barium and zinc; (2) a locality about midway between Kerman and Sirdjan for barium, lanthanum, strontium, and zinc; (4) the Meskani copper mine area for mercury, lead, and nickel as well as copper; (5) the Talmesi copper mine area for such other elements as barium, cobalt, mercury, strontium, and zinc; (6) a small pluton of granodiorite north of Natanz for tungsten and base metals; (7) the vicinity of Zendjan for auriferous polymetallic sufide deposits; (8) gold in the gorge 15 km east of Miyaneh; and (9) the area near Nodus for gold, base metals, molybdenum, and niobium, and possibly uranium. The Harsit River basin in Turkey appears to be a suitable target for geochemical exploration for gold and low-temperature hydrothermal deposits of base metals, barium, and mercury.
Anthropogenic nitrogen (N) deposition is unequally distributed across space and time, with inputs to terrestrial ecosystems impacted by industry regulations and variations in human activity. Soil carbon (C) content normally controls the fraction of mineralized N that is nitrified ( ƒ nitrified ), affecting N bioavailability for plants and microbes. However, it is unknown whether N deposition has modified the relationships among soil C, net N mineralization, and net nitrification. To test whether N deposition alters the relationship between soil C and net N transformations, we collected soils from coniferous and deciduous forests, grasslands, and residential yards in 14 regions across the contiguous United States that vary in N deposition rates. We quantified rates of net nitrification and N mineralization, soil chemistry (soil C, N, and pH), and microbial biomass and function (as beta-glucosidase (BG) and N -acetylglucosaminidase (NAG) activity) across these regions. Following expectations, soil C was a driver of ƒ nitrified across regions, whereby increasing soil C resulted in a decline in net nitrification and ƒ nitrified . The ƒ nitrified value increased with lower microbial enzymatic investment in N acquisition (increasing BG:NAG ratio) and lower active microbial biomass, providing some evidence that heterotrophic microbial N demand controls the ammonium pool for nitrifiers. However, higher total N deposition increased ƒ nitrified , including for high soil C sites predicted to have low ƒ nitrified , which decreased the role of soil C as a predictor of ƒ nitrified . Notably, the drop in contemporary atmospheric N deposition rates during the 2020 COVID-19 pandemic did not weaken the effect of N deposition on relationships between soil C and ƒ nitrified . Our results suggest that N deposition can disrupt the relationship between soil C and net N transformations, with this change potentially explained by weaker microbial competition for N. Therefore, past N inputs and soil C should be used together to predict N dynamics across terrestrial ecosystems.
Manganese is a common ferrous metal with atomic weight of 25 and the chemical symbol Mn. It constitutes roughly 0.1 percent of the Earth’s crust, making it the 12th most abundant element. Its early uses were limited largely to pigments and oxidants in chemical processes and experiments, but the significance of manganese to human societies exploded with the development of modern steelmaking technology in the 1860s. U.S consumption of manganese is about 500,000 metric tons each year, predominantly by the steel industry. Because manganese is essential and irreplaceable in steelmaking and its global mining industry is dominated by just a few nations, it is considered one of the most critical mineral commodities for the United States.
This mineral potential map is the final report in a series of publications that makes up a folio on the Seward and Blying Sound quadrangles of southern Alaska. It draws on data largely presented in previous publications of the folio. The studies were undertaken as part of the Alaska Mineral Resource Assessment Program (AMRAP), a program designed to provide information for Federal, State, local, and industry decisions concerning the future uses of Alaskan lands and resources.
The Wadi Amq quadrangle (sheet 18/41 C) lies between lat 18?00' and 18?30' N. and long 41?00' and 41?30' E. and encompasses an area of 2,937 km2, of which only about 150 km2 is land; the remainder is covered by the Red Sea. The only geologic formations exposed in the quadrangle are Quaternary volcanic rocks and surficial deposits. Most of the volcanic rocks are basalt that was extruded during a continuation of the opening of the Red Sea rift. The Quaternary surficial deposits include those of shallow bank and coral reefs, carbonate sand, sabkhahs, pediment and plains, and alluvial sand and gravel. The coral reefs could possibly provide raw material for a cement industry if required, and the sabkhahs might yield useful salts; otherwise the quadrangle has no economic mineral potential.
Descriptions of mines, prospects, and mineral occurrences in the Alaska Resource Data File (ARDF) are published for individual U.S. Geological Survey 1:250,000 scale quadrangles in Alaska (see accompanying map) and are available for downloading from USGS World Wide Web site: http://www-rnrs-ak.wr.usgs.gov/ardf . These descriptions are divided into a number of fields which describe features of each mine, prospect, or mineral occurrence. These descriptions were complied from published literature and from unpublished reports and data from industry, the U.S. Bureau of Mines, and the U.S. Geological Survey and other sources. Compilation of this database is an ongoing process and each report is essentially a progress report. The authors of the individual quadrangle reports would appreciate any corrections or additional information that users may be able to contribute.
Precipitation in the 270,000-square-mile South Atlantic-Gulf Region ranges from 44 to 80 inches, and the average runoff is about 15 inches. The ground-water discharge that forms the base flow of streams is conservatively estimated to be about 78,000 million gallons per day the equivalent of about 6 inches of precipitation. On this basis, the regional sustained ground-water supply is about 286,000 gallons per day per square mile. Projected water use through 2020 indicates that about 10 percent of the supply will meet the region's requirement for ground water. Enormous quantities of ground water are available in the South Atlantic-Gulf States in the extensive aquifers that underlie the Coastal Plain province. Large supplies of ground water can be developed also in places in the Cumberland Plateau and the Valley and Ridge provinces. In the Piedmont and Blue Ridge provinces ground water is available only in modest quantities. The principal Coastal Plain aquifers consist largely of deltaic sand and gravel deposits of Cretaceous to Quaternary age; however, a notable exception is the highly permeable Tertiary limestone aquifer, which underlies parts of four States. Ground water in the Blue Ridge and the Valley and Ridge provinces is available from openings along fissures and joints in consolidated rocks and from the unconsolidated sand and gravel in the residuum and alluvium that overlie the bedrock. In parts of these areas faulting and folding has created favorable conditions for the development of moderate supplies of ground water. In the Piedmont province modest quantities of water are available from joints and fractures. Solution cavities in massive limestone units in some areas underlying the Cumberland Plateau section yield very large quantities of ground water. Most of the major Coastal Plain aquifers are recharged where they are exposed and water moves downdip to the south. The general direction of ground-water movement in the Coastal Plain aquifers is seaward. There is, however, movement of water vertically and laterally that affects pressure and quality in every aquifer. Ground water of good chemical and physical quality is available generally except in a small area in western Alabama and eastern Mississippi and in some small coastal areas. Freshwater extends to depths of slightly more than 3,000 feet in some areas. In many areas, water can be produced that does not require any treatment for general use. The more common objectionable constituents or properties are excessive iron, fluoride, hardness, color, and acidity. Contamination or pollution of ground water is not a major regional problem, but it is significant in local areas. Many of these local problems of contamination were the result of earlier improper disposal of oil-field and industrial waste. Saltwater intrusion either directly from the sea or from estuaries has been reported in every State in the region, and the potential for the proliferation of this problem is very large. The relationship of ground water and surface water is significant at many places in the region where large ground-water withdrawals affect swamps, lakes, and the flow of streams and springs. There is a potential in some areas for using ground water during dry periods for low-flow augmentation of stream supplies. In other areas it is feasible to recharge ground-water reservoirs artificially by means of injection wells, pits, and water spreading. Although large water-level declines caused by withdrawals have occurred locally, water-level changes have been small or modest when considered on a regional basis owing to the abundant rainfall and favorable recharge conditions. The saline-water resources of the region are known to be extremely large. In some areas where the availability of freshwater is limited, saline ground water is available for desalinization to supplement freshwater supplies. Also, the saline aquifers are potential storage sites for injected freshwater. Ground-water problems generally are not severe. Critical situations are restricted to areas where large quantities of ground water are being withdrawn or where aquifers are contaminated by oil-field or industrial waste. Large withdrawals in coastal areas have caused some saltwater intrusion. In other localities, highly mineralized water may have migrated along fault zones to freshwater aquifers. Many of the present problems can be resolved or ameliorated by redistributing withdrawals or developing alternative water sources.
Historically, private non-governmental entities in the developed world took interest in wildlife in developing nations. Nineteenth and early twentieth century explorers of Africa, Asia, and South America reported fascinating encounters with magnificent species that were previously cryptic or unknown (Robinson et al. 2017). Organizations such as the Royal Geographical Society in the United Kingdom, a sponsor of Charles Darwin’s expedition, the Boone and Crockett Club in North America, and numerous museums in the United States and Europe, sponsored chronicled expeditions to remote places under the goal of discovery and collection. Concurrent with the quest for discovery of wild places and species new to science was the drive to find and secure timber, mineral, energy, and other resources to fuel the growing demands of development brought on by the Industrial Revolution (Lucas 2009, Stearns 2013). This led to exploitation, and overexploitation, which led to growing concerns over the loss of species, including species not yet known to western science. During the latter half of the twentieth century, in response to these concerns, private non-governmental organizations formed to promote conservation through science, advocacy, and technical assistance. These organizations vary from working independently, to forming collaborations across the public and private sphere. Our objective in this chapter is to outline some of the major conventions, major organizations, and programs that promote engagement in wildlife conservation and management at the international level.
Searles Lake is a dry salt pan, about 100 km 2 in area, that lies on the floor of Searles Valley, in the desert of southeast California. Several salt bodies of late Quaternary age lie beneath the surface, mostly composed of sodium and potassium carbonate, sulfate, chloride, and borate minerals. Mud layers separate the salt bodies, which contain interstitial brine that is the source of large quantities of industrial chemicals. The value of annual production from the deposit exceeds $30 million; total production to date exceeds $1 billion. The salts and muds were deposited during Pleistocene and Holocene times by a series of large lakes (200 m maximum depth, 1,000 km 2 maximum area) that fluctuated in size in response to climatic change. Salts were deposited during major dry (interpluvial) episodes, muds during wet (pluvial) episodes that correlate with glacial advances in other parts of North America and the world. Data based on cores from the deposit are used in this paper to establish the stratigraphy of the deposit, the chemical and mineral compositions of successive units, and the total quantities of components contained by them. These parameters are then used to determine the geochemical evolution of the sedimentary layers. The results provide a refined basis for reconstructing the limnology of Searles Lake and the regional climate during late Quaternary time. Six main stratigraphic units were distinguished and informally named earlier on the basis of their dominant composition: Unit Typical thickness 14C age, uncorrected (in meters) (years B.P.) Overburden Mud 7 0 to >3,500 Upper Salt 15 >3,500 to 10,500 Parting Mud 4 10,500 to 24,000 Lower Salt 12 24,000 to 32,500 Bottom Mud 30 32,500 to 130,000 Mixed Layer 200+ > 130,000 (The age of 130,000 years for the Mixed Layer is based on extrapolated sedimentation rates.) The Lower Salt is subdivided into seven salt units (S-l to S-7) and six mud units (M-2 to M-7), the Mixed Layer into six units (A to F). For each salt unit, the areal extent, volume, shape, mineralogy, and chemical composition of the solids and brines have been determined; for each mud unit (which originally extended over much of the basin), the shape and volume within a standard area, and the mineralogy, have been determined. The bulk compositions (brines plus salts) of the combined Lower Salt units S-l to S-5 and units S-6 and S-7, and the Upper Salt, were determined so that the total quantities and ratios of ions in the initial brines could be reconstructed. The 74 published HC dates on Searles Lake core samples from all but the oldest unit are supplemented by 14 new dates (determined by Minze Stuiver) on the Lower Salt. Most of the age control comes from dates based on disseminated organic carbon; two dates are on wood; dates on carbonate minerals are less reliable. Although the probable disequilibrium between the carbon in the lake and atmosphere (because of contamination, slow equilibrium rates, and other factors) causes disseminated carbon dates to be an estimated 500-2,500 years 'too old,' the ages of the major and minor units are relatively well established. The list above indicates rounded and uncorrected ages for the contacts of major units. The age of the only salt bed in the Lower Salt which indicates desiccation (S-5) is about 28,000 years. The average uncorrected sedimentation rate in the Parting Mud is 4