USGS Science⌕ Search

SEARCH · USGS Science

Results for “Geophysical Journal”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22Linked to original sources
USGS2008

Hydrothermal processes at Gusev Crater: An evaluation of Paso Robles class soils

The Mars Exploration Rover Spirit analyzed multiple occurrences of sulfur-rich, light-toned soils along its traverse within Gusev Crater. These hydrated deposits are not readily apparent in images of undisturbed soil but are present at shallow depths and were exposed by the actions of the rover wheels. Referred to as 'Paso Robles' class soils, they are dominated by ferric iron sulfates, silica, and Mg-sulfates. Ca-sulfates, Ca-phosphates, and other minor phases are also indicated in certain specific samples. The chemical compositions are highly variable over both centimeter-scale distances and between the widely separated exposures, but they clearly reflect the elemental signatures of nearby rocks. The quantity of typical basaltic soil mixed into the light-toned materials prior to excavation by the rover wheels is minimal, suggesting negligible reworking of the deposits after their initial formation. The mineralogy, geochemistry, variability, association with local compositions, and geologic setting of the deposits suggest that Paso Robles class soils likely formed as hydrothermal and famarolic condensates derived from magma degassing and/ or oxidative alteration of crustal iron sulfide deposits. Their occurrence as unconsolidated, near-surface soils permits, though does not require, an age that is significantly younger than that of the surrounding rocks. Copyright 2008 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗
USGS2007

Visible and near-infrared multispectral analysis of rocks at Meridiani Planum, Mars, by the Mars Exploration Rover Opportunity

Multispectral measurements in the visible and near infrared of rocks at Meridiani Planum by the Mars Exploration Rover Opportunity's Pancam are described. The Pancam multispectral data show that the outcrops of the Burns formation consist of two main spectral units which in stretched 673, 535, 432 nm color composites appear buff- and purple-colored. These units are referred to as the HFS and LFS spectral units based on higher and lower values of 482 to 535 nm slope. Spectral characteristics are consistent with the LFS outcrop consisting of less oxidized, and the HFS outcrop consisting of more oxidized, iron-bearing minerals. The LFS surfaces are not as common and appear, primarily, at the distal ends of outcrop layers and on steep, more massive surfaces, locations that are subject to greater eolian erosion. Consequently, the HFS surfaces are interpreted as a weathering rind. Further inherent spectral differences between layer's and between different outcrop map units, both untouched and patches abraded by the rover's Rock Abrasion Tool, are also described. Comparisons of the spectral parameters of the Meridiani outcrop with a set of laboratory reflectance measurements of Fe3+-bearing minerals show that the field of outcrop measurements plots near the fields of hematite, ferrihydrite, poorly crystalline goethite, and schwertmannite. Rind and fracture fill materials, observed intermittently at outcrop exposures, are intermediate in their spectral character between both the HFS and LFS spectral classes and other, less oxidized, surface materials (basaltic sands, spherules, and cobbles). Copyright 2007 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗
USGS2007

Coordinated analyses of orbital and spirit rover data to characterize surface materials on the cratered plains of Gusev Crater, Mars

Comparison of the Mars Exploration Rover Spirit's Pancam (0.4 to 1.0 ??m) and Mars Express Observatoire pour la Mineralogie l'Eau, les Glaces et l'Activite?? (OMEGA) (0.4 to 2.5 ??m) spectral reflectance data over Spirit's traverses shows that Gusev cratered plains are dominated by nanophase ferric-oxide-rich dust covering weakly altered basaltic sands. This interpretation is also consistent with both observations from OMEGA data covering plains beyond the traverse region and interpretations of data from the other payload instruments on the Spirit Rover. OMEGA observations of relatively low albedo regions where dust has presumably been stripped by dust devils show negative spectral reflectance slopes from 1.5 to 2.5 ??m and moderately masked spectral features which are indicative of olivine or pyroxene. High-albedo regions north and south of the Spirit landing site have flat spectral reflectance slopes and few spectral features, although all spectra have a nanophase ferric-oxide absorption edge between 0.4 and 0.75 ??m. Comparison of THEMIS-derived thermal inertia values with OMEGA-derived spectral parameters shows that although the dust cover can be optically thick (0.4 to 2.5 ??m wavelength region) in some areas, it is not thick enough (???1 cm) to mask the thermal inertia of the underlying substrate for areas included in this study. Copyright 2007 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗
USGS2021

Airborne geophysical imaging of weak zones on Iliamna Volcano, Alaska: Implications for slope stability

Water‐saturated, hydrothermally altered rocks reduce the strength of volcanic edifices and increase the potential for sector collapses and far‐traveled mass flows of unconsolidated debris. Iliamna Volcano is an andesitic stratovolcano located on the western side of the Cook Inlet, ∼225 km southwest of Anchorage and is a source of repeated avalanches. The widespread snow and ice cover on Iliamna Volcano make surface alteration difficult to identify. However, intense hydrothermal alteration significantly reduces both the electrical resistivity and magnetization of volcanic rock and can therefore be identified with airborne geophysical measurements. We use airborne electromagnetic and magnetic data to map snow and ice thickness and identify underlying alteration zones at Iliamna Volcano, Alaska. Resistivities were calculated to an average depth of >300 m, and a 3‐D susceptibility model extends from the surface to the base of the volcano, about 3,000 m below the summit. Geophysical models image low resistivity (<30 ohm‐m) and low susceptibilities near the summit of Iliamna and below its older vent complex, with the low susceptibilities indicating alteration up to ∼800 m in thickness. Thin conductors (∼50–100 m thick) on the edifice slopes coincide with recorded locations of repeated debris avalanches over the past ∼60 years and are attributed to saturated zones at high elevation. Three‐dimensional slope stability models based upon the geophysically constrained alteration distribution suggest the edifice of Iliamna is unstable and could lead to collapse scars ∼400 m deep near the current and former vent complexes.

Alaska↗
USGS2006

February 2003 marine atmospheric conditions and the bora over the northern Adriatic

A winter oceanographic field experiment provided an opportunity to examine the atmospheric marine conditions over the northern Adriatic. Mean February winds are from a northeasterly direction over most of the Adriatic and a more northerly direction along the western coast. Wind speeds are fastest in jets over the NE coast during bora events and weakest in the mid-northwestern Adriatic. Diurnal air temperature cycles are smallest on the NE coast and largest in the midwestern Adriatic. The maximum sea-air difference is +10??C on the eastern coast and near zero on the midwestern Adriatic. Boras are northeasterly (from) wind events that sweep off Croatia and Slovenia, bringing slightly colder and drier air over the northern Adriatic. The main bora season is December to March. Winter 2002-2003 was normal for bora events. Synoptic-scale temporal variations are correlated over the northern Adriatic. Fastest Bora winds and highest wind stress over the northern Adriatic is concentrated in four topographically controlled jets. The strongest is the Senj Jet, while the Trieste Jet extends across the entire northern Adriatic. Between each two jets is a weak wind zone. The greatest mean net heat loss is in bora jets in the NE Adriatic, where it was -438 W m-2 and is weakest in the midwestern northern Adriatic, where it was near zero. Wind stress is concentrated over the NE half of Adriatic in four bora jets, while wind stress is weak in the NW Adriatic. There is significant variation in wind stress mean and standard deviation structure over the northern Adriatic with each bora event. Copyright 2006 by the American Geophysical Union.

Journal of Geophysical Research C: Oceans↗
USGS2020

Seasonal subsurface thaw dynamics of an aufeis feature inferred from geophysical methods

Aufeis are sheets of ice unique to cold regions that originate from repeated flooding and freezing events during the winter. They have hydrological importance associated with summer flows and possibly winter insulation, but little is known about the seasonal dynamics of the unfrozen sediment layer beneath them. This layer may support perennial groundwater flow in regions with otherwise continuous permafrost. For this study, ground penetrating radar (GPR) were collected in September 2016 (maximum thaw) and April 2017 (maximum frozen) at the Kuparuk aufeis field on the North Slope of Alaska. Supporting surface nuclear magnetic resonance (NMR) data were collected during the maximum frozen campaign. These point-in-time geophysical data sets were augmented by continuous subsurface temperature data and periodic Structure-from-Motion digital elevation models (DEM) collected seasonally. GPR and difference DEM data showed maximum ice thicknesses of up to 6 m over the sediment surface. Below the ice, GPR and NMR identified regions of permafrost and regions of seasonally frozen sediment (i.e., the active layer) underlain by a substantial perennially unfrozen zone or “lateral talik” that ranged from 0 m to over 13 m thick. The seasonally frozen cobble layer above the talik was typically 3 to 5 m thick, with freezing apparently enabled by relatively high thermal diffusivity of the overlying ice and rock cobbles. The large talik beneath the aufeis and active layer suggests that year-round groundwater flow and coupled heat transport occurs beneath much of the feature. Highly permeable alluvial material and discrete zones of apparent groundwater upwelling indicated by geophysical and ground temperature data allows direct connection between the aufeis and the talik below.

Alaska↗
USGS2007

Three-dimensional geophysical mapping of rock alteration and water content at Mount Adams, Washington: Implications for lahar hazards

[1] Hydrothermally altered rocks, particularly if water saturated, can weaken stratovolcanoes, thereby increasing the potential for catastrophic sector collapses that can lead to far-traveled, destructive debris flows. Evaluating the hazards associated with such alteration is difficult because alteration has been mapped on few active volcanoes and the distribution and intensity of subsurface alteration are largely unknown on any active volcano. At Mount Adams, some Holocene debris flows contain abundant hydrothermal minerals derived from collapse of the altered edifice. Intense hydrothermal alteration significantly reduces the resistivity and magnetization of volcanic rock, and therefore hydrothermally altered rocks can be identified with helicopter electromagnetic and magnetic measurements. Electromagnetic and magnetic data, combined with geological mapping and rock property measurements, indicate the presence of appreciable thicknesses of hydrothermally altered rock in the central core of Mount Adams north of the summit. We identify steep cliffs at the western edge of this zone as the likely source for future large debris flows. In addition, the electromagnetic data identified water in the brecciated core of the upper 100–200 m of the volcano. Water helps alter the rocks, reduces the effective stress, thereby increasing the potential for slope failure, and acts, with entrained melting ice, as a lubricant to transform debris avalanches into lahars. Therefore knowing the distribution of water is also important for hazard assessments. Our results demonstrate that high-resolution geophysical and geological observations can yield unprecedented views of the three-dimensional distribution of altered rock and shallow pore water aiding evaluation of the debris avalanche hazard.

Journal of Geophysical Research B: Solid Earth↗
USGS2010

The North American upper mantle: Density, composition, and evolution

The upper mantle of North America has been well studied using various seismic methods. Here we investigate the density structure of the North American (NA) upper mantle based on the integrative use of the gravity field and seismic data. The basis of our study is the removal of the gravitational effect of the crust to determine the mantle gravity anomalies. The effect of the crust is removed in three steps by subtracting the gravitational contributions of (1) topography and bathymetry, (2) low-density sedimentary accumulations, and (3) the three-dimensional density structure of the crystalline crust as determined by seismic observations. Information regarding sedimentary accumulations, including thickness and density, are taken from published maps and summaries of borehole measurements of densities; the seismic structure of the crust is based on a recent compilation, with layer densities estimated from P-wave velocities. The resultant mantle gravity anomaly map shows a pronounced negative anomaly (−50 to −400 mGal) beneath western North America and the adjacent oceanic region and positive anomalies (+50 to +350 mGal) east of the NA Cordillera. This pattern reflects the well-known division of North America into the stable eastern region and the tectonically active western region. The close correlation of large-scale features of the mantle anomaly map with those of the topographic map indicates that a significant amount of the topographic uplift in western NA is due to buoyancy in the hot upper mantle, a conclusion supported by previous investigations. To separate the contributions of mantle temperature anomalies from mantle compositional anomalies, we apply an additional correction to the mantle anomaly map for the thermal structure of the uppermost mantle. The thermal model is based on the conversion of seismic shear-wave velocities to temperature and is consistent with mantle temperatures that are independently estimated from heat flow and heat production data. The thermally corrected mantle density map reveals density anomalies that are chiefly due to compositional variations. These compositional density anomalies cause gravitational anomalies that reach ~250 mGal. A pronounced negative anomaly (−50 to −200 mGal) is found over the Canadian shield, which is consistent with chemical depletion and a corresponding low density of the lithospheric mantle, also referred to as the mantle tectosphere. The strongest positive anomaly is coincident with the Gulf of Mexico and indicates a positive density anomaly in the upper mantle, possibly an eclogite layer that has caused subsidence in the Gulf. Two linear positive anomalies are also seen south of 40°N: one with a NE-SW trend in the eastern United States, roughly coincident with the Grenville-Appalachians, and a second with a NW-SE trend beneath the states of Texas, New Mexico, and Colorado. These anomalies are interpreted as being due to (1) the presence of remnants of an oceanic slab in the upper mantle beneath the Grenville-Appalachian suture and (2) mantle thickening caused by a period of shallow, flat subduction during the Laramie orogeny, respectively. Based on these geophysical results, the evolution of the NA upper mantle is depicted in a series of maps and cartoons that display the primary processes that have formed and modified the NA crust and lithospheric upper mantle.

Journal of Geophysical Research B: Solid Earth↗
USGS2009

A synthesis of Martian aqueous mineralogy after 1 Mars year of observations from the Mars Reconnaissance Orbiter

Martian aqueous mineral deposits have been examined and characterized using data acquired during Mars Reconnaissance Orbiter's (MRO) primary science phase, including Compact Reconnaissance Imaging Spectrometer for Mars hyperspectral images covering the 0.4-3.9 ??m wavelength range, coordinated with higher-spatial resolution HiRISE and Context Imager images. MRO's new high-resolution measurements, combined with earlier data from Thermal Emission Spectrometer; Thermal Emission Imaging System; and Observatoire pour la Min??ralogie, L'Eau, les Glaces et l'Activiti?? on Mars Express, indicate that aqueous minerals are both diverse and widespread on the Martian surface. The aqueous minerals occur in 9-10 classes of deposits characterized by distinct mineral assemblages, morphologies, and geologic settings. Phyllosilicates occur in several settings: in compositionally layered blankets hundreds of meters thick, superposed on eroded Noachian terrains; in lower layers of intracrater depositional fans; in layers with potential chlorides in sediments on intercrater plains; and as thousands of deep exposures in craters and escarpments. Carbonate-bearing rocks form a thin unit surrounding the Isidis basin. Hydrated silica occurs with hydrated sulfates in thin stratified deposits surrounding Valles Marineris. Hydrated sulfates also occur together with crystalline ferric minerals in thick, layered deposits in Terra Meridiani and in Valles Marineris and together with kaolinite in deposits that partially infill some highland craters. In this paper we describe each of the classes of deposits, review hypotheses for their origins, identify new questions posed by existing measurements, and consider their implications for ancient habitable environments. On the basis of current data, two to five classes of Noachian-aged deposits containing phyllosilicates and carbonates may have formed in aqueous environments with pH and water activities suitable for life. Copyright 2009 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗
USGS2008

Mapping and interpretation of Sinlap crater on Titan using Cassini VIMS and RADAR data

Only a few impact craters have been unambiguously detected on Titan by the Cassini-Huygens mission. Among these, Sinlap is the only one that has been observed both by the RADAR and VIMS instruments. This paper describes observations at centimeter and infrared wavelengths which provide complementary information about the composition, topography, and surface roughness. Several units appear in VIMS false color composites of band ratios in the Sinlap area, suggesting compositional heterogeneities. A bright pixel possibly related to a central peak does not show significant spectral variations, indicating either that the impact site was vertically homogeneous, or that this area has been recovered by homogeneous deposits. Both VIMS ratio images and dielectric constant measurements suggest the presence of an area enriched in water ice around the main ejecta blanket. Since the Ku-band SAR may see subsurface structures at the meter scale, the difference between infrared and SAR observations can be explained by the presence of a thin layer transparent to the radar. An analogy with terrestrial craters in Libya supports this interpretation. Finally, a tentative model describes the geological history of this area prior, during, and after the impact. It involves mainly the creation of ballistic ejecta and an expanding plume of vapor triggered by the impact, followed by the redeposition of icy spherules recondensed from this vapor plume blown downwind. Subsequent evolution is then driven by erosional processes and aeolian deposition. Copyright 2008 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗
USGS2009

Probabilistic tsunami hazard assessment at Seaside, Oregon, for near-and far-field seismic sources

The first probabilistic tsunami flooding maps have been developed. The methodology, called probabilistic tsunami hazard assessment (PTHA), integrates tsunami inundation modeling with methods of probabilistic seismic hazard assessment (PSHA). Application of the methodology to Seaside, Oregon, has yielded estimates of the spatial distribution of 100- and 500-year maximum tsunami amplitudes, i.e., amplitudes with 1% and 0.2% annual probability of exceedance. The 100-year tsunami is generated most frequently by far-field sources in the Alaska-Aleutian Subduction Zone and is characterized by maximum amplitudes that do not exceed 4 m, with an inland extent of less than 500 m. In contrast, the 500-year tsunami is dominated by local sources in the Cascadia Subduction Zone and is characterized by maximum amplitudes in excess of 10 m and an inland extent of more than 1 km. The primary sources of uncertainty in these results include those associated with interevent time estimates, modeling of background sea level, and accounting for temporal changes in bathymetry and topography. Nonetheless, PTHA represents an important contribution to tsunami hazard assessment techniques; viewed in the broader context of risk analysis, PTHA provides a method for quantifying estimates of the likelihood and severity of the tsunami hazard, which can then be combined with vulnerability and exposure to yield estimates of tsunami risk. Copyright 2009 by the American Geophysical Union.

Journal of Geophysical Research C: Oceans↗
USGS2012

Analysis of geophysical well logs obtained in the State 2-14 borehole, Salton Sea geothermal area, California

A complete suite of conventional geophysical well logs was obtained in the upper part of a 3220-m- deep borehole drilled into geothermally altered alluvial sediments on the southeastern edge of the Salton Sea. In situ temperatures greater than 300°C and an inability to cool parts of the borehole by circulation limited the suite of logs run below 2000 m in depth to deep induction, spontaneous potential, un-calibrated neutron, natural gamma, and temperature. Bottom-hole temperature trends given by repeat temperature logs were extrapolated to undisturbed temperatures approaching 355°C at a depth of 3220 m. Geophysical logs obtained in the State 2–14 borehole indicate that neutron porosity, gamma-gamma, and deep-induction logs provide useful information on lithologic trends with depth. The natural gamma log contains almost continuous, high-frequency fluctuations that obscure lithologic trends and that may be related to recent radioisotope redistribution and departure from radiometric equilibrium. Acoustic transit time logs give unrealistically low in situ compressional velocities ranging from 1.8 to 3.0 km/s, whereas acoustic waveform logs indicate that sediment compressional velocities range from less than 3.0 km/s shallower than 1000 m in depth to almost 5.0 km/s at depths greater than 2000 m. Analyses indicate that most log values lie between two lithologic end points: an electrically conductive claystone with moderate neutron porosity, but no effective porosity, and an electrically nonconductive, fully cemented siltstone that has small but finite porosity. A limited number of clean sandstones depart from this trend; geophysical logs from these sandstones indicate an effective porosity ranging from 5 to 14%, and saturation with brines having equivalent NaCl concentrations greater than 100,000 mg/L. Depth- averaged trends in neutron porosity and deep-induction logs, along with trends in acoustic velocity determined from acoustic waveform logs, demonstrate that major changes in the properties of alluvial sediments occur within the depth range from 1200 to 1800 m. Although caliper logs were not obtained deeper than 2000 m, resistivity values less than 10 ohm m at those depths probably correspond to borehole enlargements in production zones rather than local increases in effective porosity. The transition in sediment properties indicated by the geophysical logs in the depth interval from 1200 to 2000 m apparently represents a detailed vertical profile of the transition from relatively unaltered clay minerals in alluvial sediments to electrically nonconductive alteration products such as epidote and feldspar.

Journal of Geophysical Research Solid Earth↗
USGS2000

Geologic mapping of Europa

Galileo data enable the major geological units, structures, and surface features to be identified on Europa. These include five primary units (plains, chaos, band, ridge, and crater materials) and their subunits, along with various tectonic structures such as faults. Plains units are the most widespread. Ridged plains material spans a wide range of geological ages, including the oldest recognizable features on Europa, and appears to represent a style of tectonic resurfacing, rather than cryovolcanism. Smooth plains material typically embays other terrains and units, possibly as a type of fluid emplacement, and is among the youngest material units observed. At global scales, plains are typically mapped as undifferentiated plains material, although in some areas differences can be discerned in the near infrared which might be related to differences in ice grain size. Chaos material is composed of plains and other preexisting materials that have been severely disrupted by inferred internal activity; chaos is characterized by blocks of icy material set in a hummocky matrix. Band material is arrayed in linear, curvilinear, wedge-shaped, or cuspate zones with contrasting albedo and surface textures with respect to the surrounding terrain. Bilateral symmetry observed in some bands and the relationships with the surrounding units suggest that band material forms by the lithosphere fracturing, spreading apart, and infilling with material derived from the subsurface. Ridge material is mapped as a unit on local and some regional maps but shown with symbols at global scales. Ridge material includes single ridges, doublet ridges, and ridge complexes. Ridge materials are considered to represent tectonic processes, possibly accompanied by the extrusion or intrusion of subsurface materials, such as diapirs. The tectonic processes might be related to tidal flexing of the icy lithosphere on diurnal or longer timescales. Crater materials include various interior (smooth central, rough inner, and annular massif) and exterior (continuous ejecta) subunits. Structural features and landforms are shown with conventional symbols. Type localities for the units are identified, along with suggestions for portraying the features on geological maps, including colors and letter abbreviations for material units. Implementing these suggestions by the planetary mapping community would facilitate comparisons of maps for different parts of Europa and contribute to an eventual global synthesis of its complex geology. On the basis of initial mapping results, a stratigraphic sequence is suggested in which ridged plains form the oldest unit on Europa, followed by development of band material and individual ridges. Band materials tend to be somewhat older than ridges, but in many areas the two units formed simultaneously. Similarly, the formation of most chaos follows the development of ridged plains; although chaos is among the youngest materials on Europa, some chaos units might have formed contemporaneously with ridged plains. Smooth plains generally embay all other units and are late-stage in the evolution of the surface. C1 craters are superposed on ridged plains but are crosscut by other materials, including bands and ridges. Most c2 craters postdate all other units, but a few c2 craters are cut by ridge material. C3 craters constitute the youngest recognizable material on Europa. Copyright 2000 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗
USGS2008

Structure, stratigraphy, and origin of Husband Hill, Columbia Hills, Gusev Crater, Mars

The strike and dip of lithologic units imaged in stereo by the Spirit rover in the Columbia Hills using three-dimensional imaging software shows that measured dips (15-32??) for bedding on the main edifice of the Columbia Hill are steeper than local topography (???8-10??). Outcrops measured on West Spur are conformable in strike with shallower dips (7-15??) than observed on Husband Hill. Dips are consistent with observed strata draping the Columbia Hills. Initial uplift was likely related either to the formation of the Gusev Crater central peak or ring or through mutual interference of overlapping crater rims. Uplift was followed by subsequent draping by a series of impact and volcaniclastic materials that experienced temporally and spatially variable aqueous infiltration, cementation, and alteration episodically during or after deposition. West Spur likely represents a spatially isolated depositional event. Erosion by a variety of processes, including mass wasting, removed tens of meters of materials and formed the Tennessee Valley primarily after deposition. This was followed by eruption of the Adirondack-class plains basalt lava flows which embayed the Columbia Hills. Minor erosion, impact, and aeolian processes have subsequently modified the Columbia Hills. Copyright 2008 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗
USGS1997

Radar and photoclinometric studies of wrinkle ridges on Mars

Earth-based radar altimetry and image derived photoclinometric profiles were analyzed to examine both the long- and short-wavelength topography associated with wrinkle ridges on Mars. Photoclinometrically derived elevation data across wrinkle ridges were evaluated to determine the sensitivity of profiles to two empirical photoclinometric parameters, the horizontal digital number (HDN) and the scattered light value (SLV). The photoclinometric profiles are extremely sensitive to small variations in HDN. The sense of slope of a profile can be completely reversed over a range in HDN of as little as ±1. Comparably small variations in the SLV have relatively minor effects on the photoclinometrically derived elevations. The existence of elevation offsets from one side of the ridge to the other, reported in previous photoclinometric studies of martian wrinkles, were not confirmed through photoclinometry. In addition, no evidence of elevation offsets were found in Earth-based radar altimetry profiles across wrinkle ridges. In order to more accurately model wrinkle ridge topography, we controlled photoclinometrically derived elevations with long-wavelength topography obtained from the radar altimetry. The results of this study do not support kinematic models for the origin of planetary wrinkle ridges that involve deeply rooted thrust faults which separate crustal blocks at different elevations. A kinematic model involving buckling of shallow crustal layers into concentric folds that close, leading to the development of thrust faults, is consistent with wrinkle ridge morphology and terrestrial analogs. Recent geophysical studies of terrestrial analogs and the influence of shallow subsurface structures, particularly buried craters, on the localization of many wrinkle ridges on Mars suggest that thrust faults associated with the ridges are confined to the ridged plains material and do not extend into the lithosphere.

Journal of Geophysical Research E: Planets↗
USGS2009

Compact Reconnaissance Imaging Spectrometer for Mars investigation and data set from the Mars Reconnaissance Orbiter's primary science phase

The part of the Compact Reconnaissance Imaging Spectrometer (CRISM) for Mars investigation conducted during the Mars Reconnaissance Orbiter's (MRO's) primary science phase was a comprehensive investigation of past aqueous environments, structure of the planet's crust, past climate, and current meteorology. The measurements to implement this investigation include over 9500 targeted observations of surface features taken at spatial resolutions of better than 40 m/pixel, monitoring of seasonal variations in atmospheric aerosols and trace gases, and acquisition of a 200 m/pixel map covering over 55% of Mars in 72 selected wavelengths under conditions of relatively low atmospheric opacity. Key results from these data include recognition of a diversity of aqueous mineral-containing deposits, discovery of a widespread distribution of phyllosilicates in early to middle Noachian units, the first definitive detection of carbonates in bedrock, new constraints on the sequence of events that formed Hesperian-aged, sulfate-rich layered deposits, characterization of seasonal polar processes, and monitoring of the 2007 global dust event. Here we describe CRISM's science investigations during the Primary Science Phase, the data sets that were collected and their calibration and uncertainties, and how they have been processed and made available to the scientific community. We also describe the ongoing investigation during MRO's extended science phase. Copyright 2009 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗
USGS2019

Residence time controls on the fate of nitrogen in flow‐through lakebed sediments

For many glacial lakes with highly permeable sediments, water exchange rates control hydrologic residence times within the sediment‐water interface (SWI) and the removal of reactive compounds such as nitrate, a common pollutant in lakes and groundwater. Here we conducted a series of focused tracer injection experiments in the upper 20 cm of the naturally downwelling SWI in a flow‐through lake on Cape Cod, MA. We systematically varied residence time and reactant controls on nitrate processing, using isotopically labeled 15 N nitrate to monitor the effect of these changes on nitrate removal via denitrification. The addition of acetate, a labile carbon compound, triggered the lake SWI to switch from net production to net removal of nitrate. When acetate was combined with increased residence time created by controlled reductions in water flux, we observed a fivefold increase in nitrate removal, a 26‐fold increase in N 2 production, and a 42‐fold increase in N 2 O production. We demonstrate that water residence time is an important control on the fate of nitrate in these lake SWIs and illustrate that seasonal conditions that alter lake exchange rates and variability in lake carbon may predict dynamic nitrate removal across the SWI. Additionally, observed N 2 O production during the oxic pore water experiments paired with geophysical characterization of the sediment porosity revealed that the lake SWI has less mobile pores occupying upward of 50% of the total porosity volume, which function as reactive microzones for nitrate processing.

Journal of Geophysical Research: Biogeosciences↗
USGS2018

Temporal stress changes caused by earthquakes: A review

Earthquakes can change the stress field in the Earth’s lithosphere as they relieve and redistribute stress. Earthquake-induced stress changes have been observed as temporal rotations of the principal stress axes following major earthquakes in a variety of tectonic settings. The stress changes due to the 2011 Mw9.0 Tohoku-Oki, Japan, earthquake were particularly well documented. Earthquake stress rotations can inform our understanding of earthquake physics, most notably addressing the long-standing problem of whether the Earth’s crust at plate boundaries is “strong” or “weak.” Many of the observed stress rotations, including that due to the Tohoku-Oki earthquake, indicate near-complete stress drop in the mainshock. This implies low background differential stress, on the order of earthquake stress drop, supporting the weak crust model. Earthquake stress rotations can also be used to address other important geophysical questions, such as the level of crustal stress heterogeneity and the mechanisms of postseismic stress reloading. The quantitative interpretation of stress rotations is evolving from those based on simple analytical methods to those based on more sophisticated numerical modeling that can capture the spatial-temporal complexity of the earthquake stress changes.

Journal of Geophysical Research B: Solid Earth↗