USGS ScienceSearch

SEARCH · USGS Science

Results for “Geochronology, Thermochronology and Time Scale Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,663 records · Page 22Linked to original sources

Sensitivity of Alabama freshwater gastropod species to nickel exposure

Snails are effective bioindicators due to their prolific distribution, high level of endemism, and capacity to accumulate contaminants. Freshwater snails have unique ecological niches which are imperiled by land‐use change and the introduction of hazardous chemicals. To assess how environmental alterations affect gastropods, lab‐based studies are needed to characterize the toxicity of specific stressors. This can help guide policy decisions and remediation efforts. The aim of this research was to characterize acute toxicity of nickel (Ni) on endemic snails ( Somatogyrus georgianus [Walker, 1904], Elimia cahawbensis [Lea, 1861], and Elimia spp.) and measure the accumulation of Ni and mineral elements including calcium (Ca), magnesium, potassium, and sodium (Na). Snails were exposed to six concentrations (25–800 µg/L) of Ni for 96 h. Among the studied snail species, E. cahawbensis was the most sensitive to Ni, with the lowest lethal concentration where 50% of the organisms died (LC50) at 88.88 µg/L Ni after 96 h. The LC50 at 96 h for S. georgianus was 167.78 µg/L Ni, and 393.13 μg/L Ni for Elimia spp. Except for Elimia spp., mortality of the other two snail species corresponded to the whole‐body uptake of Ni. Nickel exposure also influenced Ca and Na uptake for Elimia spp. All three endemic species are potential candidate species for evaluating localized effects of human activities, and the present study provides a first step in characterizing how snails would be affected by environmental alterations. More research could further characterize potential effects of other human stressors on these endemic snail species. Future research into subindividual responses and routes of exposure can further elucidate variations in species sensitivity.

Alabama

Aeromagnetic and magnetotelluric imaging of west-central Idaho and the Stibnite-Yellow Pine mining district: A regional to district perspective

Aeromagnetic and magnetotelluric (MT) data are used to better understand the geology and mineral resources near the Stibnite-Yellow Pine mining district in central Idaho. The reduced-to-pole (RTP) transformation of regional-scale aeromagnetic data shows that allochthonous island-arc rocks west of the Salmon River suture are significantly more magnetic than the Laurentian continental rocks east of the suture and that the granitoids of the Idaho batholith have moderate to low magnetization in both early, metaluminous, and late, peraluminous phases. Application of tilt derivative to aeromagnetic data highlights major crustal-scale structures. The 5-km upward continued magnetic data indicate island-arc rocks have deep magnetic sources. The 110-km-long MT profile images resistivity structure to depths around 30 km. At shallow depths, resistivity corresponds to mapped geologic units, with moderate resistivities underlying volcanic and roof-pendant metasedimentary rocks and moderate to high resistivities occurring beneath the Idaho batholith. Crustal-scale moderate resistivities beneath the suture image the results of tectonomagmatic processes that accompanied suturing and translating allochthonous terranes. Low resistivity values beneath and fringing the batholith are derived from metasedimentary rocks that may have served as a melt source and reductant during melt generation and provided metals during later ore formation. In the Stibnite-Yellow Pine mining district, a high-resolution aeromagnetic compilation is shown to correlate with mapped lithologies and mineral deposit-related structures. The RTP transform distinguishes magnetic and nonmagnetic granitoid phases of the Idaho batholith. The tilt derivative highlights metasedimentary rocks, some of which are favorable ore hosts. The Meadow Creek fault hosts the Stibnite and Hangar Flats deposits and is imaged as a magnetic low due to hydrothermal alteration. Reconstructions of magnetic anomaly offsets and orebodies indicate around 3 km of post-95 Ma dextral separation, with some or all of the offset inferred to postdate the main Au mineralization episode (61–66 Ma).

Idaho

Bayesian belief network model to predict human-wildlife conflict in protected areas

Human-wildlife conflict (HWC) poses a pervasive global challenge, affecting livelihoods and threatening biodiversity. To better anticipate and mitigate HWC risk, we developed a large-scale predictive model using a Bayesian Belief Network (BBN). We surveyed 1,011 park rangers across 135 terrestrial protected areas in three Andean countries, documenting recent HWC incidents involving wildlife persecution or killing, livestock depredation, crop damage, or threats to human safety and property. We identified key drivers of HWC risk, including governance, wildlife acceptance, participation, and habitat quality. A sensitivity analysis revealed that enhancing governance and improving wildlife acceptance could reduce HWC risk by > 85%. The BBN model demonstrated scalability, effectively identifying strategies to reduce HWC risk at multiple scales, from individual protected areas to national networks. Our findings highlight the importance of strengthening governance, increasing wildlife acceptance, and enhancing community participation in conservation efforts. BBNs provide a flexible, cost-effective, and data-driven tool to guide protected areas and wildlife managers in monitoring, anticipating, and making informed decisions to mitigate conflict and promote coexistence.

Scientific Reports

Methods for quantifying interactions between groundwater and surface water

Driven by the need for integrated management of groundwater (GW) and surface water (SW), quantification of GW–SW interactions and associated contaminant transport has become increasingly important. This is due to their substantial impact on water quantity and quality. In this review, we provide an overview of the methods developed over the past several decades to investigate GW–SW interactions. These methods include geophysical, hydrometric, and tracer techniques, as well as various modeling approaches. Different methods reveal valuable information on GW–SW interactions at different scales with their respective advantages and limitations. Interpreting data from these techniques can be challenging due to factors like scale effects, heterogeneous hydrogeological conditions, sediment variability, and complex spatiotemporal connections between GW and SW. To facilitate the selection of appropriate methods for specific sites, we discuss the strengths, weaknesses, and challenges of each technique, and we offer perspectives on knowledge gaps in the current science.

Annual Review of Environment and Resources

The 2023 Alaska National Seismic Hazard Model

US Geological Survey (USGS) National Seismic Hazard Models (NSHMs) are used extensively for seismic design regulations in the United States and earthquake scenario development, as well as risk assessment and mitigation for both buildings and infrastructure. This 2023 update of the long-term, time-independent Alaska NSHM includes substantial changes to both the earthquake rupture forecast (ERF) and ground motion models (GMMs). The ERF includes numerous additions to the finite-fault model, considers two deformation models, and introduces updated declustering and smoothing algorithms in the gridded background seismicity model. For the Alaska–Aleutian subduction zone, megathrust earthquakes occur on an updated structural and segmentation model, and the moment magnitude (M) 8+ rupture and rate model include a logic tree branch that considers slip rates derived from geodetic models of interface coupling. The megathrust model considers multiple models of down-dip width, and magnitudes are computed using newly developed scaling relations. For subduction intraslab events and subduction interface events with M < 7, the 2023 update uses a smoothed seismicity model with rupture depths derived from Slab2. The 2023 model updates GMMs in all tectonic settings using the recently published Next Generation Attenuation Subduction (NGA-Sub) GMMs for subduction interface and intraslab events, and the NGA-West2 GMMs for active crustal settings. Collectively, additions and updates to the Alaska NSHM result in hazard increases across most of south-central Alaska relative to the previous model, published in 2007. These changes are primarily due to the adoption of updated rate models for the large-magnitude interface events and the NGA-Sub GMMs that have much higher aleatory variability (sigma), consistent with global observations, and that include models of epistemic uncertainty.

Alaska

A partially nonergodic ground-motion model for Fourier amplitude spectra for the San Francisco Bay area, California, USA

We develop a partially nonergodic ground-motion model (GMM) for Fourier amplitude spectra for the San Francisco Bay Area, California, USA, using the Bayless and Abrahamson (2019) GMM as a reference ergodic GMM and developing location-dependent adjustments to the predicted median and variance. We compile regional ground-motion data from moment magnitude (𝑀 w ) >3 earthquakes occurring during 2000–2022 for which magnitude information is available in the U.S. Geological Survey Comprehensive Catalog (Guy et al., 2015). The data set predominantly consists of records from 𝑀 w 3.5–4.5 earthquakes but includes three well-recorded 𝑀 w > 5 events. Ground-motion residuals are evaluated using the time-averaged shear-wave velocity in the top 30 m (𝑉 S30 ) from the California-specific map of Thompson et al. (2018) and basin-depth site parameters from the seismic velocity model of Aagaard and Hirakawa (2021). The 𝑉 S30 dependence and basin-depth scaling of the reference ergodic GMM of Bayless and Abrahamson (2019) are evaluated and modified with the updated data set. We compute maps of site adjustments using a varying-coefficient model that considers the spatial correlation structure and uncertainties at each observation location. The spatial covariance model is developed using ground-motion residuals that are standardized by the uncertainty model, which allows for consideration of the aleatory variability in developing the site adjustments. The covariance model is fit considering the means and standard deviations of the site terms at all locations. The use of partially nonergodic median adjustments results in modified variance components of the within-event variability. Due to the low number of large-magnitude earthquakes that control seismic hazard in the data set, we do not modify between-event variance; however, we present adjustments to site-to-site variability for use in partially nonergodic hazard assessments.

California

A scientific vision and roadmap for earthquake rupture forecast developments, a USGS perspective

We articulate a scientific vision and roadmap for the development of improved Earthquake Rupture Forecast models, which are one of the two main modeling components used in modern seismic hazard and risk analysis. One primary future objective is to provide fully time-dependent models that include both elastic rebound and spatiotemporal clustering nationwide, which is particularly important for shorter-term hazard and risk considerations (e.g., earthquake insurance products). We also discuss the importance and perennial challenges associated with quantifying epistemic uncertainties, including those associated with deformation-model slip rates, un-quantified sampling errors with respect to off-fault seismicity, and any spatial covariances. The need for more physics-based approaches is also emphasized, as is the benefit of adding model valuation (quantifying usefulness) to our verification and validation protocols. Given the multidisciplinary and system-level nature of this activity, modular design is critical. Future updates will also draw from best-available science by both the United States Geological Survey and the external community. The primary goal of this paper is to highlight plans that guide research and facilitate community engagement with model development, especially with respect to lowering the entry barrier for early career scientists and engineers. The paper is written so readers can focus on the sections that interest them most (see table of contents), with the Introduction and Discussion providing a stand-alone overview and summary.

Bulletin of the Seismological Society of America

Repeated coral bleaching events have eroded reef accretion potential in the Florida Keys

Coral bleaching is now the primary driver of coral-reef degradation globally, threatening the persistence of coral-reef functions and the invaluable ecosystem services they support. The Florida Keys have been impacted by four severe, regional-scale coral-bleaching events, which occurred in 1997–1998, 2005, 2014–2015, and 2023. Our aim in this study was to quantify the effects of those thermal-stress events on the persistence of coral-reef structures. We leveraged long-term coral-reef monitoring data to quantify the impacts of coral bleaching on coral cover, carbonate production, and reef-accretion potential throughout the Florida Keys from 1996–2024. Our study indicates that coral bleaching drove significant declines of reef-building corals, which successively diminished regional-scale reef-accretion potential (from 1.65 ± 0.33 mm y -1 in 1996) and culminated with a regional-scale transition to net reef erosion (-0.12 ± 0.08 mm y -1 ) following the 2023 event. Coral bleaching was the primary driver of declining reef-building capacity, with the cumulative impacts of the four coral-bleaching events accounting for >75% of total declines since 1996. The 1997–1998 event alone drove ~50% of overall declines, largely due to losses of the shallow-water ecosystem engineer, Acropora palmata . More moderate impacts of thermal stress on regional reef-accretion potential in 2005 (6%) and 2014–2015 (9%) could lend some support to the hypothesis that the remaining corals were more thermally tolerant; however, the unprecedented thermal stress event in 2023 caused widespread coral-bleaching and bleaching-related mortality, and caused an additional 12% of the total decline in reef-accretion potential. Stony-coral tissue loss disease accounted for an additional 6% of the decline, with the remaining 19% unexplained. Coral bleaching has already dramatically reshaped the structure and function of coral reefs in the Florida Keys over the last three decades. With the high likelihood that thermal stress will accelerate moving forward, the persistence of Florida’s essential coral-reef functions and services is uncertain.

Florida

Slope Unit Maker (SUMak): An efficient and parameter-free algorithm for delineating slope units to improve landslide modeling

Slope units are terrain partitions bounded by drainage and divide lines. In landslide modeling, including susceptibility modeling and event-specific modeling of landslide occurrence, slope units provide several advantages over gridded units, such as better capturing terrain geometry, improved incorporation of geospatial landslide-occurrence data in different formats (e.g., point and polygon), and better accommodating the varying data accuracy and precision in landslide inventories. However, the use of slope units in regional ( > 100 km 2 ) landslide studies remains limited due, in part, to the large computational costs and/or poor reproducibility with current delineation methods. We introduce a computationally efficient algorithm for the parameter-free delineation of slope units that leverages tools from within TauDEM and GRASS, using an R interface. The algorithm uses geomorphic laws to define the appropriate scaling of the slope units representative of hillslope processes, avoiding the often ambiguous determination of slope unit size. We then demonstrate how slope units enable more robust regional-scale landslide susceptibility and event-specific landslide occurrence maps.

Natural Hazards and Earth Systems Sciences (NHESS)

Remote sensing-based actual evapotranspiration assessment in a data-scarce area of Brazil: A case study of the Urucuia Aquifer System

The large groundwater reserves of the Urucuia Aquifer System (UAS) enabled agricultural development and economic growth in the western Bahia State, in northeastern Brazil. Over the last several years, concern has grown around the aquifer’s diminishing water levels, and water balance (WB) studies are in demand. Considering the lack of measured actual evapotranspiration (ET a ), a major component of the water cycle, this work uses the Operational Simplified Surface Energy Balance (SSEBop) model to estimate ET a , and compares it to basin-scale estimates from the Soil Moisture Accounting Procedure (SMAP) monthly model and from an annual WB closure method, based on gridded meteorological data and the Gravity Recovery and Climate Experiment (GRACE) product. Additionally, a comparative assessment of different versions of the SSEBop parameterization was performed. Moderate Resolution Imaging Spectroradiometer (MODIS) imagery was used to implement eight different versions of the SSEBop algorithm over the UAS between 2000 and 2013. SSEBop and SMAP ET a yielded similar seasonal patterns, with correlation coefficient (r) up to 0.65, mean difference (MD) of 0.8 mm/month and mean absolute difference (MAD) of 18.5 mm/month. Comparison of SSEBop annual ET a estimates to annual SMAP and WB closure estimates yielded low MD (12.1 and −7.3 mm/year, respectively) and MAD (82.5 and 82.8 mm/year, respectively), but also low r values (0.00 and 0.37, respectively). The comparison of the different SSEBop versions indicated the need to incorporate a calibration step of the aerodynamic heat resistance (r ah ) parameter. SSEBop results were also used for land cover and drought monitoring. Analysis indicates that agriculture, associated with an increasing trend of atmospheric evaporative demand, is responsible for the decrease in groundwater levels and streamflow in the studied time period.

Urucuia Aquifer System

Reservoir evolution, downstream sediment transport, downstream channel change, and synthesis of geomorphic responses of Fall Creek and Middle Fork Willamette River to water years 2012–18 streambed drawdowns at Fall Creek Lake, Oregon

Executive Summary Chapter A. Introduction Fall Creek Dam impounds Fall Creek Lake, a 10-kilometer-long reservoir in western Oregon and is operated by the U.S. Army Corps of Engineers (USACE) primarily for flood-risk management (or flood control) in late autumn through early spring months, as well as for water quality, irrigation, recreation, and habitat in late spring through early autumn. Since 2011 (water year [WY] 2012), Fall Creek Lake has been temporarily drawn down each year to facilitate downstream passage of juvenile spring Chinook salmon ( Oncorhynchus tshawytscha ) through the 55-meter (m) high dam. This annual dam operation is temporary, typically lasting about 1–2 weeks from WY 2012 through 2020 (drawdown operations in WY 2022–24 have increased to more than 6 weeks). Drawdown of the reservoir results in lake levels being lowered to the elevation near the historical, pre-dam streambed. The annual streambed drawdowns of WY 2012–18 have improved fish passage and led the USACE to formally adopt streambed drawdowns as part of annual operations at Fall Creek Dam. However, temporarily lowering the lake to streambed creates free-flowing conditions in the reservoir that result in the erosion and episodic export of predominantly sand and finer-grained sediments (less than 2 millimeters [mm]) to the lower gravel-bed reaches of Fall Creek and the Middle Fork Willamette River. The introduction of large volumes of sand and finer-grain sediment into the dam-regulated reaches downstream from Fall Creek Dam prompted questions about the geomorphic responses to annual streambed drawdowns within Fall Creek Lake and downstream reaches along Fall Creek and the Middle Fork Willamette River. The U.S. Geological Survey (USGS) in partnership with USACE initiated a comprehensive geomorphic and sediment transport investigation to assess the coupled processes of reservoir erosion, sediment evacuation from Fall Creek Lake, and patterns of sediment transport and deposition in reaches downstream from the Fall Creek Dam that have resulted from annual streambed drawdowns. The purpose of this report is to systematically describe the processes of sediment erosion, transport, and deposition at Fall Creek Lake and geomorphic interactions between reaches upstream and downstream from Fall Creek Dam that relate to dam operations. Specifically, this report focuses on evaluating geomorphic responses to streambed drawdowns from WY 2012 through 2018 and placing drawdown-induced geomorphic responses within the broader context of physiographic and historical conditions and dam operations of Fall Creek and Middle Fork Willamette Rivers. Key objectives for this study were to characterize changes in reservoir morphology and substrate at Fall Creek Lake, describe the character and temporal pattern of sediment transport downstream from Fall Creek Dam, characterize geomorphic changes in channel reaches downstream from the Fall Creek Dam, and relate these data to the annual streambed drawdowns of WY 2012–18. This study uses multiple independent monitoring and measurement approaches to assess site, reach, and river-scale geomorphic responses to drawdowns to inform dam and reservoir management. Patterns and processes of reservoir evolution were assessed with geomorphic mapping and volumetric analyses of topography through comparison of multiple digital surface models (DSMs). Just downstream from Fall Creek Dam, analyses of sediment export from the reservoir focused on suspended sediment but also incorporated bedload analyses to assess sediment sizes. Geomorphic assessments downstream from the dam used reach-scale and site-scale approaches to document changes in channel morphology and substrate, including site measurements of sand and finer-grained sediment deposition and in-channel bed-material, volumetric change analyses from comparison of digital elevation models (DEMs), and repeat geomorphic mapping. Findings from this study inform river management and dam operations by providing an understanding of (1) coupled upstream-downstream geomorphic responses to the Fall Creek Lake streambed drawdowns, (2) geomorphic responses of Fall Creek Lake streambed drawdowns in comparison to drawdowns at other large dams, (3) controls on reservoir erosion and downstream geomorphic responses, and (4) implications for future hydrogeomorphic changes that may result from continued drawdowns and monitoring activities to assess those changes. Chapter B. Reservoir Morphology and Evolution Related to Dam Operations at Fall Creek Lake To understand the volume and distribution of sediment accumulation in Fall Creek Lake since dam closure in 1965, decadal-scale sedimentation patterns (spanning approximately 1965–2016) are evaluated using a combination of storage curve analyses and geomorphic mapping. Short-term (drawdown event-scale) patterns of erosion, sedimentation, and sediment export downstream are evaluated using a combination of geomorphic mapping and change detection analyses that quantify the distribution and total volume of sediment erosion and deposition within Fall Creek Lake. Geomorphic mapping of reservoir topography and analyses of historical datasets reveals four categories of landforms and sediment processes within Fall Creek Lake related to lake level operations: lacustrine sedimentation expressed in the reservoir floor, fluvial erosion and deposition within historical stream channels during streambed drawdowns, channel-like features created by erosion within the reservoir floor during streambed drawdowns, and erosion on reservoir hillslopes. Where the reservoir floor is mapped for this study as pelagic (deep water), deposition up to 3 meters (m) thick by lacustrine processes and burial of pre-dam topography with deposits thinning toward the edges of the valley floor and upstream areas of reservoir are observed. Despite over 50 years of sediment accumulation since dam construction, the main stream channels of Fall and Winberry Creeks (or reservoir thalwegs) through the reservoir are well defined, though their distinct morphology is likely influenced by a long history of recurring historical drawdowns to or near streambed since dam construction. Unregulated streamflow and sediment transport through the reservoir primarily are confined to these channels during the streambed drawdown periods. Erosional channel-like features created by drawdowns are carved through underlying, unconsolidated reservoir floor sediments and are most prominent in the lower reservoir below minimum conservation pool (the low pool elevation during winter flood season); sediment generated from the formation of these drawdown channels is more likely to be transported through and out of the reservoir than sediment deposits along the reservoir hillslopes at the valley margins that are separated from main channels by areas of low-gradient reservoir floor. Morphologic changes in the lower reservoir topography between January 2012 and November 2016 indicate overall net erosion of about 129,500 cubic meters (m 3 ). The most prominent geomorphic changes occurred along the main channels of Fall and Winberry Creeks near the Fall Creek Dam where incision, lateral migration, and slumping banks resulted in vertical and lateral adjustments to channel position, whereas most changes fell below the detectable limit on higher-elevation reservoir floor surfaces except where erosion occurred along features mapped as drawdown channels. Chapter C. Sediment Delivery from Fall Creek Lake and Transport through Downstream Reaches USGS implemented a sediment monitoring program in WY 2013–18 to evaluate the quantity and character of reservoir sediment exported from Fall Creek Lake during streambed drawdowns. Turbidity and suspended sediments were monitored annually autumn through spring to span the WY 2013–18 streambed drawdowns; however, unequal monitoring timeframes each year reduced the ability to compare results and factors affecting sediment export from the reservoir difficult between years. These data were originally measured to develop regressions and compute suspended-sediment loads (SSL). Bedload sediment monitoring from a cableway at the Fall Creek streamgage was completed in the autumn-winter of WY 2013 and 2017. The limited number of samples and presumed variability in sediment supply from the reservoir precluded construction of streamflow and bedload discharge relations to compute more than instantaneous bedload. Sand and finer-grained silts and clays were transported from the reservoir in suspension, though some coarser grains (up to 32 mm) were also mobilized and transported downstream from the dam as bedload. Observations of increased sediment transport downstream from Fall Creek Dam coincided with lake levels approaching about 3 m (10 feet [ft] or elevation 690 ft) above the streambed regulating outlets. Suspended-sediment loads computed for the full monitoring periods WY 2013–18 at the Fall Creek streamgage, located 1.4 kilometers (km) downstream from Fall Creek Dam, range from 54,700 metric tons (t) in WY 2013 to 13,900 t in WY 2018. Although the total annual SSL varied from year to year, the overall seasonal patterns of suspended sediment transport throughout each year were similar during monitoring in WY 2013-18. Suspended-sediment loads were low prior to the drawdown, then increased rapidly as lake levels lowered and approached the streambed. In the weeks following the drawdown period, as pool levels were increased, SSL remained slightly elevated above pre-drawdown levels but generally declined through the following winter and spring except during streamflow-driven pulses of suspended-sediment transport. WY 2013 had the greatest total computed SSL for each streambed drawdown and partial-year monitoring period. SSL computed for the partial-year period have generally decreased since WY 2013 and have varied by about 6,800 t with the exception of WY 2014. WY 2014 SSL reflects anomalously low sediment export due to low streamflows and freezing conditions that stabilized reservoir floor deposits. Bedload measurements in the short 1.4-km reach between Fall Creek Dam and the Fall Creek streamgage showed an inverse correlation between bedload transport rates and discharge, which probably reflects diminishing supply of coarse-sized sediment. Sand was more abundant (60–100 percent) than gravel in bedload samples confirming sand and finer-grained sediment dominated sediment evacuated from the reservoir during streambed drawdowns at Fall Creek Lake. Chapter D. Geomorphic Responses to Fall Creek Lake Streambed Drawdowns Downstream from Fall Creek Dam In the days, weeks, and months following streambed drawdown operations at Fall Creek Dam through WY 2018, sites downstream from the dam displayed a variety of geomorphic responses to reservoir sediment delivery within the main channel and overbank areas. Evaluation of streambed elevations at two streamgages located 1.4 km downstream from the dam on Fall Creek and 16.3 km downstream from the dam on the Middle Fork Willamette River indicated the effects of drawdown sediment on bed elevations were modest and transient. Repeat particle size measurements (October 2015 and September 2016) at five sites along Fall Creek and the Middle Fork Willamette River showed similar grain-sized distributions that do not reveal substantial deposition of fine-grained sediment related to the WY 2016 streambed drawdown. Altogether, these findings indicate that transport capacity in the main, low-flow channels of Fall Creek and Middle Fork Willamette River during WY 2012–18 was sufficient to mobilize and evacuate reservoir sediments from streambed drawdowns or other bank material and tributary sources. However, other monitoring for this study indicate low-velocity zones in off-channel areas are prime locations for sand and finer-grain sediment deposition. Patterns of overbank sediment accumulation indicate that the magnitude and timing of overbank deposition on bars and low-elevation floodplain varies with proximity to the dam, geomorphic setting, streamflows, and other factors. Sand and finer-grained reservoir sediments carried as suspended-sediment load in the reaches downstream from Fall Creek Dam were deposited in overbank areas as observed with clay-horizon markers during WY 2016–17. Overbank deposition quantified with Geomorphic Change Detection (GCD) software evaluated landform-scale patterns of erosion and deposition using repeat light detection and ranging (lidar) surveys at two sites in the Upper Fall Creek reach and one site in the Jasper reach for 3 years (2012–15) and one site in the Clearwater reach for 6 years (2009–15). Deposition thickness and spatial patterns from the GCD analysis were variable; some sites had dispersed but measurable deposition while at others, deposition was highly localized and exceeded 1 m in depth. Patterns of overbank deposition illustrate interactions among bar morphology, local hydraulics, and suspended-sediment transport dynamics that can create patches of highly localized deposition. The measured deposition at the two Fall Creek GCD sites likely resulted from reservoir sediments released from Fall Creek Lake during streambed drawdowns in WY 2016 and 2017 because the limited sediment inputs from bank material (geomorphically laterally stable reach) or tributaries (no significant tributaries) provided few other sediment sources. On the Middle Fork Willamette River, observed patterns of overbank deposition could reflect sediment sourced from upstream tributaries, bank erosion, or Fall Creek Lake streambed drawdown operations. Despite the introduction of several thousand tons of reservoir sediment delivered from the Fall Creek Lake streambed drawdowns to below-dam river corridors, reach-scale mapping of channel features downstream from Fall Creek Dam shows minimal evidence of changes in channel planform or landforms that can be attributed to a drawdowns in WY 2012–16. On Upper Fall Creek reach, widespread increases in gravel bars or other in-channel sediment did not result from the five streambed drawdowns. The main changes attributable to sediment releases from Fall Creek Lake were localized increases in vegetated bar area, particularly on channel margin areas where sand and finer-grain sediment was deposited and rapidly colonized by vegetation. The area of mapped secondary water features decreased between 2005 and 2016, but that may be due to lower discharges depicted in the 2016 aerial photographs and less mapped area of inundation. Primary changes along the Lower Fall Creek reach include a 6.4 percent decrease in area of secondary water features between 2011 and 2016, and a nearly twofold increase in the area of unvegetated bars. Immediately downstream from the Fall Creek confluence, there were negligible changes in the location and areas of vegetated bars and the main wetted channel between 2005 and 2016, and local increases in bar area cannot be attributed solely to deposition of reservoir sediments from Fall Creek Lake because (1) areas along the Middle Fork Willamette River just upstream from the Fall Creek confluence display similar type and magnitude of changes and (2) some of the increases at the confluence area pre-date the drawdowns. The cumulative effect of sediment releases from Fall Creek Lake streambed drawdowns from WY 2012 to 2016 on downstream channel planform and landforms are modest compared to the river-scale transformations and planform changes that occurred in the decades following dam construction. Chapter E. Discussion of Geomorphic Responses of Fall Creek and Middle Fork Willamette River to Streambed Drawdowns at Fall Creek Lake Multiple aspects of Fall Creek Dam infrastructure and operations exert first-order controls on the magnitudes of reservoir erosion that occur during the streambed drawdowns and ultimately determine the sediment delivery to downstream reaches. Key aspects of the dam and its operations that are most relevant to assessing geomorphic responses to streambed drawdowns include the (1) dam infrastructure, including configuration and size of regulating outlets and their proximity to the streambed which dictates the capacity and competence of the river to deliver sediment to downstream reaches and mode of sediment transport as suspended-sediment load or bedload; (2) frequency of historical drawdowns and long-term, year-round dam operations and lake level management, which partly dictate reservoir morphology and locations and magnitudes of readily erodible materials; (3) dam operations and hydroclimatic conditions during the streambed drawdown (including length of the drawdown and streamflows entering the reservoir), which directly control the timing, duration and magnitude of reservoir erosion and sediment evacuation; and (4) dam operations following the streambed drawdown operation that regulate streamflows (and thereby sediment transport conditions) downstream of Fall Creek Dam which primarily reflect interactions between hydroclimatic conditions and flood control operations. Patterns of sediment erosion and evacuation observed in this study at Fall Creek Lake from WY 2012–18 suggest that reservoir erosion during annual streambed drawdowns may remain similar or decrease in future years assuming (1) annual streambed drawdown operations are implemented in similar manner as the WY 2012–18 drawdowns (in terms of duration, late autumn or early winter implementation, rate of pool-level lowering to reach streambed, and other factors), (2) streambed drawdowns coincide with similar conditions as were observed WY 2012–18 (similar sediment yield into reservoir, low reservoir inflows, limited precipitation, moderate air temperature), and (3) no major geomorphic changes in the main reservoir channels of Fall and Winberry Creeks occur (for example, channel avulsion). Under such conditions, it is hypothesized that the stream channel within the reservoir would achieve a quasi-equilibrium state with respect to annual influx and export of sediment and aided by the substantial amount of in-channel bedrock, will remain laterally stable without erosion across reservoir deposits. Patterns of sediment transport measured at the Fall Creek streamgage downstream from Fall Creek Dam provide insight into the potential effects of future streambed drawdowns at Fall Creek Lake. Analyses of suspended sediment measured in WY 2013–18 show a major reduction in suspended-sediment loads between WY 2013 and later years, indicating streamflows transporting sediment through the reservoir to downstream reaches during streambed drawdowns have become supply limited. The 6-year suspended-sediment monitoring and sampling program is insufficient to make predictions about future sediment transport conditions because of uneven monitoring periods and varying controls on reservoir sediment erosion. It is likely that future suspended-sediment loads will be variable but similar to those observed in WY 2015–18 if operational, climatic, and geomorphological factors remain similar to those monitored WY 2015–18. Suspended-sediment loads downstream from Fall Creek Lake will likely remain highest when regulating outlets are fully open and Fall Creek is free flowing with the reservoir fully drained with little to no residual pool. Over time, it is possible that the suspended-sediment loads would reflect mobilization of reservoir sediment deposited in the previous year rather than erosion of sediment deposited years or decades earlier. Bedload is likely to remain a small fraction of the total sediment load evacuated from the reservoir and is relatively modest compared with pre-dam bedload transport rates because most coarse sediment remains trapped by the dam. If sediment releases from Fall Creek Lake and ensuing streamflow conditions follow a similar pattern in the future as was assessed in this study spanning WY 2012–18, near-term geomorphic adjustments downstream of the dam are expected to be modest. Barring major operational, climatic, and geomorphological changes, local site-scale deposition on bars, overbank areas, or off-channel features that persists several months after the streambed drawdown will likely continue to be highly variable, ranging from negligible to several centimeters of deposition. At the landform-scale, low velocity areas nearest to Fall Creek Dam will likely continue to undergo rapid deposition immediately during and after a streambed drawdown event, similar to patterns observed for WY 2012–18. Some of the sediment entering these off-channel features and margin areas may be temporarily stored, then later remobilized and dispersed farther downstream. But if newly deposited sediment persists through the following spring, there is a greater likelihood that local vegetation will establish, reinforce deposited material, and trap sediment during later drawdowns. The reach-scale geomorphic changes may become more apparent if (1) streambed drawdowns continued for several decades, and geomorphic changes were measured at decadal scales or (2) the amount of sediment introduced to downstream reaches substantially increased and (or) sediment transport capacity decreased. The continued streamflow regulation of Fall Creek Dam after sediment releases provides an opportunity to strategically manage streamflows during and after the streambed drawdowns to minimize downstream sediment impacts and ensure other operational thresholds are satisfied. This study provides a comprehensive foundation of datasets and geomorphic analyses to inform dam operations at Fall Creek Lake, monitor sediment transport downstream, and consider operational schemes for future drawdowns. The datasets from this study also provide baselines of sediment transport and geomorphic conditions to assess future changes in reservoir and downstream environments. Future monitoring could be tailored to address specific questions regarding the long-term geomorphic effects of streambed drawdowns on fluvial habitats, flood hazards, cultural resources, or downstream water quality. Future monitoring activities could focus on the relevant geomorphic processes and spatial domains within the three categories used for this study: (1) reservoir erosion and net sediment evacuation, (2) sediment delivery to downstream reaches, including magnitude and temporal pattern of sediment transport, and (3) geomorphic responses of downstream reaches to sediment delivery. Specifically, high priority future monitoring activities could include: Repeat topographic or photographic surveys in the reservoir to characterize changes occurring within individual drawdowns, to quantify sediment export, to determine temporal changes in reservoir storage, and to identify locations of erosion and deposition. Continuous, year-round turbidity monitoring supplemented with suspended-sediment measurements at a streamflow-gaging station immediately downstream from the dam to quantify sediment export. Repeat geomorphic monitoring, mapping, or modeling in downstream reaches to track changes in channel and over bank features using a combination of site- and reach-scale monitoring approaches. This could support assessments of sediment deposition and ensuing vegetation encroachment on flood hazards and habitats and examine how sediment transport and depositional processes may be affected by different sediment supply, streamflow, or dam management scenarios.

Oregon

State of science, gap analysis, and prioritization for southeastern United States water-quality impacts from coastal storms—Fiscal year 2023 program report to the Water Resources Mission Area from the Water Availability Impacts of Extreme Events Program—Hurricanes

Tropical cyclones (coastal storm events that include tropical depressions, tropical storms, and hurricanes) cause landscape-scale disturbances that can lead to impaired water quality and thus reduce water availability for use. Stakeholders and scientists at local and national scales have illustrated a need for understanding these risks to water quality. A regional and comprehensive understanding of the impacts of tropical storms and hurricanes on surface-water and groundwater quality—and thus water availability—is lacking for potentially impacted coastal and inland areas. As the U.S. Geological Survey considers development of tools to predict the extent to which water-quality impacts of hurricanes affect water availability, an assessment of the state of the science of hurricane impacts is needed, including a gap analysis and prioritization of data and science needs. This assessment focuses on the southeastern coastal States.

southeastern United States

Application of non-stationary shear-wave velocity randomization approach to predict 1D seismic site response and its variability at two downhole array recordings

Accounting for uncertainties in seismic site response is crucial to improving the performance of one-dimensional (1D) ground response analyses (GRAs) at downhole array recording sites. In addition to site effects, uncertainties in 1D-GRAs can also be contributed from the seismic source and/or path. Though often representing not more than one percent of the distance (path) from the source, site conditions are known to have an enormous influence on ground shaking. In this study, we focus on the site shear-wave velocity ( V S ) structure, which is the main ingredient for estimating the variability of site response. As such, V S can manifest aleatory uncertainties related to the effects of small-scale spatial heterogeneities within the near surface, thus V S can substantially modify ground shaking during earthquakes. We apply a novel V S randomization approach to propagate the small-scale heterogeneities of V S to estimate seismic site response within a non-stationary probabilistic framework. The randomization approach generates samples of V S profiles that are used to perform several 1D-GRAs and obtain an averaged site response and related variability. The proposed method is implemented on data recorded at two downhole array sites with different subsurface soil conditions: a soft soil site on Treasure Island (California, United States of America) and a rock outcrop site in Cadarache (South-East France). We show that synthetic surface-to-borehole transfer functions from 1D-GRAs provide an acceptable fit to the empirical transfer functions from low-motion earthquake records and succeed in reproducing most of the site-specific seismic response variability. The remaining mismatch between transfer functions is likely due to insufficient precision on the seismic bedrock and the impedance contrast. The variability in site response is discussed with emphasis on the role of V S small-scale heterogeneities, attenuation, and input motion incidence angle in ground motion variability for the site and soil conditions at both locations.

California

Summary of selenium in the lower Gunnison River Basin, Colorado—Information and data gaps

The Cretaceous Mancos Shale is a geologic source of selenium in the lower Gunnison River Basin. Natural weathering processes and human activity mobilize selenium from the Mancos Shale and derived materials, and surface water, groundwater, and sediment all affect the transport of selenium from source areas to receiving streams and biota. Selenium accumulates through the aquatic food chain, and its toxic effects can result in invertebrate mortality and mortality, decreased reproduction, and deformities to fish and birds. The Bureau of Reclamation, in cooperation with the State of Colorado and Gunnison River Basin water users, is implementing a Selenium Management Program to reduce selenium concentrations in the lower Gunnison River Basin of Colorado. Goals of the Selenium Management Program are to (1) achieve compliance with the State of Colorado chronic aquatic-life standard for dissolved selenium (4.6 micrograms per liter) in the Gunnison River near Grand Junction, Colorado; (2) sufficiently improve water-quality conditions to assist in the recovery of endangered species in the Gunnison and Colorado Rivers by reducing selenium concentrations; and (3) support continued water uses in the basin. Many previous studies have contributed to the understanding of selenium in the environment; however, monitoring and research data gaps exist in the lower Gunnison River Basin. The purpose of this report is to summarize information regarding selenium in the lower Gunnison River Basin and describe strategies for scientific research and monitoring to potentially improve understanding of selenium sources; processes affecting the mobilization, transport, and fate of selenium; and the effects of selenium-mitigation projects in the lower Gunnison River Basin. Monitoring and research data gaps discussed in this report include geologic mapping and geochemical source characterization, long-term and ongoing monitoring of the surface-water and groundwater networks, developing and refining statistical models, characterizing selenium on suspended sediment, modeling selenium in the food web, evaluating best management practices, and more.

Colorado

Simulation of groundwater flow and brine discharge to the Dolores River in the Paradox Valley, Montrose County, Colorado

Salinity, or total dissolved solids (TDS), of the Colorado River affects agricultural, municipal, and industrial water users and is an important concern in the Western United States. In the Paradox Valley of southwestern Colorado, natural discharge of sodium-chloride brine to the Dolores River from the underlying core of a salt-valley anticline accounts for about 6 percent of the salinity load to the Colorado River. Formation of the Paradox Valley began during the Miocene, and subsequent erosion exposed the Pennsylvania Paradox Formation in the core of the anticline where a cap rock, collapse features, breccia, and sodium-chloride saturated brine developed at the top of the exposed salt diapir. The discharge of brine to the Dolores River is affected by these dissolution features, along with seasonal hydrologic conditions and density-dependent flow between older dense brine and the younger fresh groundwater in the overlying alluvial aquifer. To reduce TDS concentrations in the Dolores River through the Paradox Valley, the Bureau of Reclamation has pumped brine from a series of shallow wells adjacent to the river since July 1996. The pumped brine is collected and piped to a deep disposal well where it is injected into the Mississippian Leadville Limestone at a depth of about 4,570-meters below land surface. The pumping and injection operation is collectively known as the Paradox Valley Unit (PVU), and by 2015, the PVU had substantially reduced TDS concentrations in the Dolores River by about 70 percent. Since 2019, injection-pressure limits and related seismic activity have constrained deep-well injection and thus brine pumping at the PVU. In cooperation with the Bureau of Reclamation, the U.S. Geological Survey developed a MODFLOW-6 three-dimensional, variable-density groundwater flow and TDS transport model of the Paradox Valley to evaluate the effects of PVU pumping operations on brine discharge to the Dolores River and to guide additional research. The finite-difference model grid consists of 76 rows and 48 columns oriented from northwest to southeast in alignment with valley topography and groundwater-flow directions in the near-surface freshwater alluvial aquifer. A 7-layer hydrogeologic framework was developed from existing datasets to represent the alluvial aquifer, cap rock, collapse breccia, and groundwater flow and TDS transport from the underlying Paradox Formation salt to the Dolores River. The model represents a 33-year transient calibration period from 1987 through 2020 that includes pre-PVU conditions from 1987 through June 1996 and post-PVU conditions from July 1996 through 2020. A 1,000-year simulation of groundwater flow and coupled TDS transport computed the initial conditions for the subsequent 33-year transient simulation. Observations of precipitation, streamflow, evaporation, agricultural land use, and PVU brine pumping rates were used to specify appropriate boundary conditions to the model representing time-varying recharge, tributary streamflow, groundwater underflow, evapotranspiration (ET), and PVU pumping. Values for average monthly streamflow and TDS concentration at the upstream streamgage, the Dolores River at Bedrock (USGS streamgage 09169500), were specified as model input where the Dolores River enters Paradox Valley. Observed pumping from the PVU, water levels and TDS concentrations in groundwater, and streamflow and estimated TDS concentrations at the downstream streamgage, the Dolores River near Bedrock (USGS streamgage 09171100), were calibration targets that constrained the manual calibration of model parameters representing aquifer hydraulic conductivity, storage, streambed conductance, recharge, and (ET). Two primary model-calibration targets were the match between observed and simulated TDS mass flux from PVU pumping wells and the match between estimated and simulated TDS mass flux to the Dolores River. The simulated TDS mass withdrawn by pumping wells is calculated by the model as the product of the assigned pumping rate and simulated groundwater TDS concentrations. Because actual pumping rates were assigned as simulated values, the total simulated PVU pumping for the 33-year calibration is within 0.5 percent of the observed values. However, simulated concentrations and thus mass flux of TDS withdrawn by the PVU pumping wells were consistently about 26 percent less than observed values for all the simulated time periods (33-year simulation, pre-PVU, and post-PVU). The representation of brine inflow was explored through additional modeling to evaluate the effect of the simulated brine source on groundwater TDS concentrations. Results indicated that a saturated-salt constant-flux brine source best replicated the magnitude and transient pattern observed for TDS mass flux from PVU pumping wells. The simulated TDS mass flux to the Dolores River is compared to estimates based on observed streamflow and specific conductance (SC) data for the downstream streamgage. The calibrated model provided a close fit of simulated to measured streamflow at the downstream streamgage, and the calibrated model fit to estimated TDS concentrations at the downstream streamgage was reasonable. The greatest differences between simulated and estimated values occurred during drought periods from June 2000 to March 2003, May 2012 to June 2013, and October 2013 to October 2014, when simulated TDS concentrations in the river were greater than estimated concentrations. In general, simulated TDS mass flux to the river for the pre-PVU period is in good agreement with estimated values (2-percent difference), but the model overestimated TDS mass flux to the river by about 41 percent during the post-PVU period. The model uncertainty with respect to TDS mass flux to the river indicates other processes or model parameters not well represented by the model are affecting the system, especially during drought. During model calibration, the most sensitive parameters were identified as vertical hydraulic conductivity of the alluvial aquifer, conductance of the Dolores River streambed, ET extinction depth and rate, and recharge rate. Five 5-year scenarios of conditions for 2021–25 were simulated to assist evaluation of alternative strategies to manage the discharge of brine into the Dolores River. The first scenario simulates no PVU pumping and serves as a base case for comparison to the other scenarios. Two scenarios simulate the effects of varying withdrawal timing at an annual rate about one-third less than during 2010 through 2018. During high-flow spring snowmelt runoff periods when brine discharge is naturally minimized, PVU pumping does not substantially affect salinity in the Dolores River, and comparison of these two scenarios indicates that scheduling brine withdrawals during times of low river stage is nearly as effective at reducing TDS mass flux to the river as pumping brine year-round. Cessation of pumping during periods of high river stage may be advantageous for system maintenance, brine injection, and seismic-risk reduction. The fourth scenario tested the effect of reducing irrigation-return flow on brine discharge and predicted a slight reduction of TDS mass flux to the Dolores River, but not as great a reduction as that of using the PVU to remove brine. The fifth scenario simulated 5 years of drought conditions without PVU pumping and indicates brine discharge during drought about 15 percent greater than during average hydrologic conditions. Results from scenario 5 are consistent with the calibrated model results and indicate that aquifer properties and ET processes and parameters may be affecting simulation results during drought. The Paradox Valley groundwater model provides a reasonable overall match to observed conditions in the Dolores River. The model is useful for evaluating relative differences between brine management scenarios to inform PVU operational decisions and to identify gaps in data and process understanding. Representation of the brine source, hydraulic-conductivity parameters, and recharge and ET processes were identified as potential areas for additional field and modeling research. Additional research in the Paradox Valley might include field-data collection that provides additional information on the hydrogeologic framework, groundwater levels, groundwater TDS concentrations, stream characteristics, and aquifer properties. Additional modeling efforts could benefit from applying advanced tools for model development, calibration, and visualization including parameter-estimation and sensitivity analysis. Statistical evaluation of known model uncertainties such as hydraulic conductivity, streambed conductance, representations of the brine source, recharge, and ET could improve the match between simulated and estimated TDS mass flux from PVU pumping wells and to the Dolores River further informing model predictions and system understanding for the Paradox Valley.

Colorado

Methodology for compilation of previously published contour data showing the altitude of the base of Dakota Sandstone on the Colorado Plateau, Arizona, Colorado, New Mexico, and Utah

Structure contours and other geologic information from numerous published geologic maps were digitized and compiled into a digital dataset showing the configuration of a single stratigraphic datum, the base of the Dakota Sandstone and its equivalents across the Colorado Plateau. The principal maps compiled in digital form are a series of 1:250,000-scale 1 degree (°) × 2° quadrangle maps published by the U.S. Geological Survey, augmented by other geologic maps published at various map scales. The compiled digital dataset contains geologic map polygons of the Dakota Sandstone and regional stratigraphic equivalents, the location of faults and fold axes, structure contour lines that define the altitude of the base of the unit and bedding orientation data computed from the structure contour lines. This report provides the scientific rationale for compilation of these data and describes the compilation methodology for each of the data elements. This report provides an extended description of the data compilation in a companion U.S. Geological Survey digital data release of spatial data and attributes associated with the contoured surface and associated geologic data layers.

Arizona, Colorado, New Mexico, Utah

A three-dimensional geologic framework model of the northern Great Plains region of Montana, North Dakota, South Dakota, and Wyoming, USA

This report presents a new three-dimensional geologic framework model (GFM) of the northern Great Plains region, encompassing parts of Montana, North Dakota, South Dakota, and Wyoming. The model provides a regionally consistent, geographic information system (GIS)-ready representation of Phanerozoic sedimentary strata, major fault systems, and Precambrian basement geometry across two sedimentary basins and adjacent uplifts. More than 300,000 geologic and geophysical data inputs were synthesized to model 41 stratigraphic horizons and 47 faults, yielding an internally coherent, sealed-volume interpretation of the subsurface. The modeling workflow developed for this study demonstrates an efficient and scalable approach for constructing basin-to regional-scale GFMs in geologically complex and data-variable settings. Although model fidelity varies with data density and quality, the resulting geometry is broadly consistent with 1:500,000-scale geologic mapping and highlights areas where additional geologic study is most needed. The three-dimensional GFM provides a foundational framework to support groundwater, energy, and mineral resource assessments, and offers a transferable methodology for potential future U.S. Geological Survey efforts to build large-area subsurface models in underexplored regions of the United States.

Montana, North Dakota, South Dakota, Wyoming

Mineralization processes at Escanaba Trough

Escanaba Trough off northern California is the southernmost and only sediment covered segment of the Gorda Ridge. Hydrothermal mineralization was first discovered in Escanaba Trough in 1985, and subsequent investigations included the delineation of the NESCA (northern Escanaba) and SESCA (southern Escanaba) sections of Escanaba Trough, as well as drilling by Ocean Drilling Program (ODP) Leg 169 in 1996. Preliminary research conducted in the 1980s distinguished two classes of sulfide mineral assemblages within the Escanaba Trough: one dominated by pyrrhotite (Fe 1-x S) and one containing ‘mixed sulfides’ including chalcopyrite (CuFeS 2 ) and sphalerite (ZnS). In 2022, we conducted a research expedition to the Escanaba Trough to more thoroughly characterize mineralization processes and consider preservation of precipitated minerals throughout hydrothermally active and inactive sections of Escanaba Trough, with the specific objective of characterizing the host minerals, and processes of enrichment for specific elements which are currently listed as critical elements and can also be toxic under certain conditions (Sb, As, Ba, Co, Ga, Ge, Te). The following will include initial results from that work.

California