SEARCH · USGS Science

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21Linked to original sources

USGS2015

Surface monitoring of microseismicity at the Decatur, Illinois, CO2 sequestration demonstration site

Sequestration of CO2 into subsurface reservoirs can play an important role in limiting future emission of CO2 into the atmosphere (e.g., Benson and Cole, 2008). For geologic sequestration to become a viable option to reduce greenhouse gas emissions, large-volume injection of supercritical CO2 into deep sedimentary formations is required. These formations offer large pore volumes and good pore connectivity and are abundant (Bachu, 2003; U.S. Geological Survey Geologic Carbon Dioxide Storage Resources Assessment Team, 2013). However, hazards associated with injection of CO2 into deep formations require evaluation before widespread sequestration can be adopted safely (Zoback and Gorelick, 2012). One of these hazards is the potential to induce seismicity on pre-existing faults or fractures. If these faults or fractures are large and critically stressed, seismic events can occur with magnitudes large enough to pose a hazard to surface installations and, possibly more critical, the seal integrity of the cap rock. The Decatur, Illinois, carbon capture and storage (CCS) demonstration site is the first, and to date, only CCS project in the United States that injects a large volume of supercritical CO2 into a regionally extensive, undisturbed saline formation. The first phase of the Decatur CCS project was completed in November 2014 after injecting a million metric tons of supercritical CO2 over three years. This phase was led by the Illinois State Geological Survey (ISGS) and included seismic monitoring using deep borehole sensors, with a few sensors installed within the injection horizon. Although the deep borehole network provides a more comprehensive seismic catalog than is presented in this paper, these deep data are not publicly available. We contend that for monitoring induced microseismicity as a possible seismic hazard and to elucidate the general patterns of microseismicity, the U.S. Geological Survey (USGS) surface and shallow borehole network described below provides an adequate event detection threshold. The formation targeted for injection is the Mount Simon Sandstone, which is laterally extensive, has high porosity and permeability and has the potential to host future CCS projects due to its favorable hydrologic characteristics and proximity to industrial sources of CO2 (Birkholzer and Zhou, 2009). At Decatur, CO2, a byproduct of ethanol production at the Archer Daniels Midland (ADM) facility, is compressed to supercritical state and injected at 2.1 km depth into the 460 m thick Mount Simon Sandstone. This sandstone has varying properties, ranging from the lower, fine- to coarse-grained sandstone with high permeability and porosity, to the middle and upper Mount Simon, which consist of planar, cross-bedded layers of varied permeability and porosity (Leetaru and Freiburg, 2014). The changes in permeability and porosity within the Mount Simon Sandstone, due to depositional and diagenetic differences, create horizontal baffles, which inhibit vertical flow and restrict the injected CO2 to remain near the injection horizon (Bowen et al., 2011). The lowest portion of the Mount Simon Sandstone overlying the Precambrian rhyolite basement is the Pre-Mount Simon interval, generally < 15 m in thickness and composed of fine- to medium-grain size sandstone that is highly deformed (Leetaru and Freiburg, 2014). The basement rhyolite has a clayrich matrix and is fractured, with significant alterations within the fractures. The primary sealing cap rock is the Eau Claire Formation, a 100–150 m thick unit at a depth of roughly 1.69 km (Leetaru and Freiburg, 2014). The Maquoketa Shale Group and the New Albany Shale serve as secondary and tertiary seals at shallower depths of ∼820 and ∼650 m, respectively. The ISGS managed the Illinois Basin–Decatur Project (IBDP), a three-year project beginning in November 2011, during which carbon dioxide was injected at a rate of ∼1000 metric tons per day until November 2014 (Finley et al., 2011, 2013). ADM manages the Illinois Industrial CCS (ICCS) project, which will inject ∼3000 metric tons/day into a second injection well starting in the summer of 2015. The USGS began monitoring microseismicity with a 13- station seismic network at Decatur in July 2013 (Fig. 1). This network provides good detection capabilities and azimuthal (focal sphere) coverage for microseismicity with moment magnitudes (Mw) above about −0:5. Here, we report on 19 months of microseismicity monitoring at the Decatur CO2 sequestration site, which permits a detailed look at the evolution and character of injection-induced seismicity.

Illinois↗

USGS2018

Geologic framework for the national assessment of carbon dioxide storage resources—Atlantic Coastal Plain and Eastern Mesozoic Rift Basins

This chapter presents information pertinent to the geologic carbon dioxide (CO 2 ) sequestration potential within saline aquifers located in the Atlantic Coastal Plain and Eastern Mesozoic Rift Basins of the Eastern United States. The Atlantic Coastal Plain is underlain by a Jurassic to Quaternary succession of sedimentary strata that onlap westward onto strata of the Appalachian Piedmont physiographic province and generally thicken eastward toward the present-day Atlantic coastline and onto the present-day continental shelf. Although no significant petroleum discoveries have been made on the coastal plain, the deep saline aquifers of the region appear to contain porous strata (potential reservoirs, or “storage formations”) that are overlain by fine-grained, laterally continuous strata (potential seals), which are prospective CO 2 sequestration targets. For the Atlantic Coastal Plain, we identify two storage assessment units (SAUs), both of which consist of Cretaceous strata. The two SAUs are the Lower Cretaceous Composite SAU C50700101 and the Upper Cretaceous Composite SAU C50700102. The Eastern Mesozoic Rift Basins are a chain of generally southwest- to northeast-trending, elongate sedimentary basins that either underlie the Atlantic Coastal Plain or crop out within adjacent geologic provinces to the west. Similar to the Atlantic Coastal Plain, there has been no significant oil and gas production from any of the basins, although there is a proven petroleum system in several of them. At least three of these basins appear to contain potential storage formations overlain by potential seal units. Most of the other basins were not assessed because a storage and (or) seal formation could not be established in the timeframe of the assessment, often because of the paucity of subsurface data for these basins in comparison to other petroliferous basins of the United States. Thus, we present information supporting one quantitative assessment in the Newark basin, as well as information supporting two nonquantitative assessments, one for strata in the Gettysburg basin and the other for strata in the Culpeper basin. We briefly discuss six other basins within the Eastern Mesozoic Rift Basins that were not assessed. For all SAUs, we discuss the areal distribution of suitable CO 2 reservoir rock. We also describe the overlying sealing unit and the geologic characteristics that influence the potential CO 2 storage volume and reservoir characteristics. These characteristics include storage formation depth, gross thickness, net thickness, porosity, permeability, and groundwater salinity. Case-by-case strategies for estimating the pore volume existing within structurally and (or) stratigraphically closed traps are presented. Although assessment results are not contained in this chapter, the geologic information included herein was used to calculate the potential storage space in the SAUs.

Atlantic Coastal Plain and Eastern Mesozoic Rift B↗

USGS2017

Inner-shelf ocean dynamics and seafloor morphologic changes during Hurricane Sandy

Hurricane Sandy was one of the most destructive hurricanes in US history, making landfall on the New Jersey coast on Oct 30, 2012. Storm impacts included several barrier island breaches, massive coastal erosion, and flooding. While changes to the subaerial landscape are relatively easily observed, storm-induced changes to the adjacent shoreface and inner continental shelf are more difficult to evaluate. These regions provide a framework for the coastal zone, are important for navigation, aggregate resources, marine ecosystems, and coastal evolution. Here we provide unprecedented perspective regarding regional inner continental shelf sediment dynamics based on both observations and numerical modeling over time scales associated with these types of large storm events. Oceanographic conditions and seafloor morphologic changes are evaluated using both a coupled atmospheric-ocean-wave-sediment numerical modeling system and observation analysis from a series of geologic surveys and oceanographic instrument deployments focused on a region offshore of Fire Island, NY. The geologic investigations conducted in 2011 and 2014 revealed lateral movement of sedimentary structures of distances up to 450 m and in water depths up to 30 m, and vertical changes in sediment thickness greater than 1 m in some locations. The modeling investigations utilize a system with grid refinement designed to simulate oceanographic conditions with progressively increasing resolutions for the entire US East Coast (5-km grid), the New York Bight (700-m grid), and offshore of Fire Island, NY (100-m grid), allowing larger scale dynamics to drive smaller scale coastal changes. Model results in the New York Bight identify maximum storm surge of up to 3 m, surface currents on the order of 2 ms-1 along the New Jersey coast, waves up to 8 m in height, and bottom stresses exceeding 10 Pa. Flow down the Hudson Shelf Valley is shown to result in convergent sediment transport and deposition along its axis. Modeled sediment redistribution along Fire Island showed erosion across the crests of inner shelf sand ridges and sedimentation in adjacent troughs, consistent with the geologic observations.

Continental Shelf Research↗

USGS2004

Delineation of Areas Contributing Water to the Dry Brook Public-Supply Well, South Hadley, Massachusetts

Areas contributing water to the Dry Brook public-supply well in South Hadley, Massachusetts, were delineated with a numerical ground-water-flow model that is based on geologic and hydrologic information for the confined sand and gravel aquifer pumped by the supply well. The study area is along the Connecticut River in central Massachusetts, about 12 miles north of Springfield, Massachusetts. Geologic units in the study area consist of Mesozoic-aged sedimentary and igneous bedrock, late-Pleistocene glaciolacustrine sediments, and recent alluvial deposits of the Connecticut River flood plain. Dry Brook Hill, immediately south of the supply well, is a large subaqueous lacustrine fan and delta formed during the last glacial retreat by sediment deposition into glacial Lake Hitchcock from a meltwater tunnel that was likely near where the Connecticut River cuts through the Holyoke Range. The sediments that compose the aquifer grade from very coarse sand and gravel along the northern flank of the hill, to medium sands in the body of the hill, and to finer-grained sediments along the southern flank of the hill. The interbedded and overlapping fine-grained lacustrine sediments associated with Dry Brook Hill include varved silt and clay deposits. These fine-grained sediments form a confining bed above the coarse-grained aquifer at the supply well and partially extend under the Connecticut River adjacent to the supply well. Ground-water flow in the aquifer supplying water to Dry Brook well was simulated with the U.S. Geological Survey ground-water-flow modeling code MODFLOW. The Dry Brook aquifer model was calibrated to drawdown data collected from 8 observation wells during an aquifer test conducted by pumping the supply well for 10 days at a rate of 122.2 cubic feet per minute (ft3/min; 914 gallons per minute) and to water levels collected from observation wells across the study area. Generally, the largest hydraulic conductivity values used in the model were in the sand and gravel aquifer near the Dry Brook well, which is consistent with the geologic information. Results of aquifer-test simulation indicated that spatially variable aquifer hydraulic properties and boundary conditions affected heads and ground-water flow near the well. A comparison and analysis of water-level fluctuations in study area wells to fluctuations in the Connecticut River indicated a hydraulic connection of the aquifer with the river, which is also consistent with geologic information. Simulated ground-water levels indicated that most ground water in the study area flowed toward and discharged to the Connecticut River and the Dry Brook well. Small amounts of ground water also discharged to smaller streams (Dry Brook and Bachelor Brook) in the study area. Areas contributing water to the well were delineated with the MODPATH particle-tracking routine. Results of the contributing-area analysis indicated that the greatest sources of water to the well were recharge in the Dry Brook Hill area and infiltration of Connecticut River water in an area beyond the extent of the confining bed where the aquifer is in hydraulic connection with the river. The amount of water entering the Dry Brook well from recharge dominated at a lower pumping rate (40.0 ft3/min); about 90 percent of the pumped water originated from recharge and boundary flow, and infiltration from the Connecticut River supplied the remaining 10 percent. At a high pumping rate (122.2 ft3/min), however, about half of the water pumped from the Dry Brook well originated from recharge and boundary flow (49 percent), and half originated from infiltration of water from the Connecticut River (51 percent). Results of a sensitivity analysis of the extent of areas contributing water to the Dry Brook well when pumped at 122.2 ft3/min indicated that the size of these areas did not substantially change when aquifer properties were varied. In contrast, however, the size of these areas changed most when the recharge

Water-Resources Investigations Report↗

USGS2013

Geologic framework for the national assessment of carbon dioxide storage resources: Columbia Basin of Oregon, Washington, and Idaho, and the Western Oregon-Washington basins

The 2007 Energy Independence and Security Act (Public Law 110–140) directs the U.S. Geological Survey (USGS) to conduct a national assessment of potential geologic storage resources for carbon dioxide (CO 2 ). The methodology used by the USGS for the national CO 2 assessment follows that of previous USGS work. The methodology is non-economic and intended to be used at regional to subbasinal scales. This report identifies and contains geologic descriptions of three storage assessment units (SAUs) in Eocene and Oligocene sedimentary rocks within the Columbia, Puget, Willapa, Astoria, Nehalem, and Willamette Basins of Oregon, Washington, and Idaho, and focuses on the characteristics, specified in the methodology, that influence the potential CO 2 storage resource in those SAUs. Specific descriptions of the SAU boundaries as well as their sealing and reservoir units are included. Properties for each SAU, such as depth to top, gross thickness, porosity, permeability, groundwater quality, and structural reservoir traps, are provided to illustrate geologic factors critical to the assessment. The designated sealing unit in the Columbia Basin is tentatively chosen to be the ubiquitous and thick Miocene Columbia River Basalt Group. As a result of uncertainties regarding the seal integrity of the Columbia River Basalt Group, the SAUs were not quantitatively assessed. Figures in this report show SAU boundaries and cell maps of well penetrations through sealing units into the top of the storage formations. The cell maps show the number of penetrating wells within one square mile and are derived from interpretations of incompletely attributed well data, a digital compilation that is known not to include all drilling. The USGS does not expect to know the location of all wells and cannot guarantee the amount of drilling through specific formations in any given cell shown on the cell maps.

Idaho, Oregon, Washington↗

USGS1973

A progress report on results of test drilling and ground-water investigations of the Snake Plain aquifer, southeastern Idaho: Part 1: Mud Lake Region, 1969-70 and Part 2: Observation Wells South of Arco and West of Aberdeen

The results of drilling test holes to depths of approximately 1,000 feet in the Mud Lake region show that a large part of the region is underlain by both sedimentary deposits and basalt flows. At some locations, predominantly sedimentary deposits were penetrated; at others, basalt flows predominated. The so-called Mud Lake-Market Lake barrier denotes a change in geology. From the vicinity of the barrier area, as described by Stearns, Crandall, and Steward (1938, p. 111), up the water-table gradient for at least a few tens of miles, the saturated geologic section consists predominantly of beds of sediments that are intercalated with numerous basalt flows. Downgradient from the barrier, sedimentary deposits are not common and practically all the water-bearing formations are basalt, at least to the depths explored so far. Thus, the barrier is a transition zone from a sedimentary-basaltic sequence to a basaltic sequence. The sedimentary-basaltic sequence forms a complex hydrologic system in which water occurs under water-table conditions in the upper few tens of feet of saturated material and under artesian conditions in the deeper material in the southwest part of the region. The well data indicate that southwest of the barrier, artesian pressures are not significant. Southwest of the barrier, few sedimentary deposits occur in the basalt section and, as described by Mundorff, Crosthwaite, and Kilburn (1964). ground water occurs in a manner typical of the Snake Plain aquifer. In several wells, artesian pressures are higher in the deeper formations than in the shallower ones, but the reverse was found in a few wells. The available data are not adequate to describe the water-bearing characteristics of the artesian aquifer nor the effects that pumping in one zone would have on adjacent zones. The water-table aquifer yields large quantities of water to irrigation wells.

Idaho↗

USGS1993

Reconnaissance investigation of the geology and hydrogeology of Lackland Air Force Base, San Antonio, Texas

An investigation at Lackland Air Force Base and Lackland Air Force Base Training Annex (Medina Base) was conducted from May to September 1988 to delineate the subsurface geology, to describe the hydrogeology within the study area, and to determine possible migration pathways for contaminants. Data from this investigation supplement data collected in conjunction with other Air Training Command studies conducted under the Installation Restoration Program. The geologic formations in the vicinity of Lackland Air Force Base and Medina Base consist of sedimentary rocks of Cretaceous, Tertiary, and Quaternary age. The lithology of these formations consists primarily of limestone and marl, with lesser amounts of gravel, sand, silt, shale, and clay. The formations that comprise the geologic setting at Lackland Air Force Base and Medina Base include the Navarro Group of Late Cretaceous age, the Midway Group and Uvalde Gravel of Tertiary age, and the Leona Formation and fluviatile terrace deposits of Quaternary age. The age of the faulting within the study area has not been determined accurately, but the faulting might have occurred during intervals from Early Cretaceous to Holocene time. During these tectonic episodes, uplift of the Edwards Plateau might have occurred. This uplift could have enhanced erosion of the Cretaceous age Edwards Group, which is north of the study area, causing deposition of alluvial deposits south of this tectonic activity. The Leona Formation is composed of limestone gravel deposits forming terraces in the valleys of present streams. In general, these terraces are topographically lower than those formed by the Uvalde Gravel. In contrast, the fluviatile terrace deposits are above flood level along entrenched streams such as Leon and Medio Creeks. The Leona Formation is generally above the level of these fluviatile terrace deposits. A review of the hydrogeologic literature indicated that the Navarro and Midway Groups do not yield water to wells in Bexar County. However, recent studies by the U.S. Geological Survey at Kelly Air Force Base indicate that the uppermost beds of the Navarro Group can be saturated but yield little or no water to wells. Each stream terrace deposit of the Leona Formation and the fluviatile terrace deposits are separate water-bearing units. At Lackland Air Force Base, shallow ground water is present in the Leona Formation and the flow probably is toward Leon Creek. At Medina Base, the fluviatile terrace deposits are present along both banks of Medio Creek and probably are separate water-bearing units. Furthermore, ground-water flow in each of these units probably is toward Medio Creek. The Uvalde Gravel, present only at and west of Medina Base, is not a source of shallow ground water. However, during periods of precipitation, the formation can readily absorb precipitation and surface runoff. Water drains quickly through the formation because of its topographically high position and substantial hydraulic conductivity. Major pathways of potential contaminant migration off the bases include the local streams of Medio and Leon Creeks, and to a lesser extent, the shallow ground water beneath the bases. Although the Uvalde Gravel is not a source of shallow ground water at Medina Base, it drains water quickly, and wastes that might be buried in the gravel could be a potential source of contamination during brief ground-water recharge periods resulting from major precipitation.

Texas↗

USGS2006

Geologic, hydrologic, and geochemical interpretations of mineral deposits as analogs for understanding transport of environmental contaminants

Base- and precious-metal mineral deposits comprise anomalous concentrations of metals and associated elements, which may be useful subjects for study as analogs for migration of environmental contaminants. In the geologic past, hydrothermal mineral deposits formed at the intersection of favorable geologic, hydrologic and geochemical gradients. In the present, weathering of these sulfide-rich deposits occurs as a result of the interplay between rates of oxygen supply versus rates of ground or surface-water flow. Transport and spatial dispersion of elements from a mineral deposit occurs as a function of competing rates of water flow versus rates of attenuation mechanisms such as adsorption, dilution, or (co)precipitation. In this paper we present several case studies from mineralized and altered sedimentary and crystalline aquifers in the western United States to illustrate the geologic control of ground-water flow and solute transport, and to demonstrate how this combined approach leads to a more complete understanding of the systems under study as well as facilitating some capability to predict major flow directions in aquifers.

Journal of Geochemical Exploration↗

USGS1984

Shoreface translation and the Holocene stratigraphic record: Examples from Nova Scotia, the Mississippi Delta and eastern Australia

Classic descriptive models of barrier sedimentation have been developed with data from the Atlantic and Gulf coasts of the United States. These models are dominated by low to moderate rates of relative sea level (RSL) rise and wave energy. Barriers respond by landward recycling of sediment through the mechanism of shoreface retreat. Sedimentation processes on the central coast of New South Wales (N.S.W.), Australia, consist of rapid RSL rise in early Holocene times followed by a stillstand since 6500 B.P. Wave energy is relatively high year-round and sand sources for barrier formation are only found on the inner shelf. Barrier sedimentation on the central coast of N.S.W. exhibits a thick, composite sequence composed of a basal marine transgressive sand overlain by regressive beach and dune facies. The Louisiana coast surrounding the Mississippi delta is underlain by compacting deltaic muds which generate very rapid rates of RSL rise. The Louisiana coast experiences low wave energy punctuated by high-energy tropical and extra-tropical storm events. Barrier sediments accumulate from the erosion of deltaic headlands and undergo a transformation from subaerial barrier island systems to subaqueous shoals located on the inner shelf. Drumlins experience coastal erosion on the Eastern Shore of Nova Scotia and provide a sediment source for compartmented estuary mouth barriers. An ongoing, moderate rise of RSL results from the passage of a glacial forebulge. Wave energy is intermediate between Louisiana and N.S.W. and displays a seasonal pattern dominated by frequent winter storms. Coastal barrier sedimentation is episodic, consisting of a period of beach ridge progradation followed by barrier destruction and re-establishment further landward. The three contrasting sedimentary sequences found in examples from Louisiana, N.S.W. and Nova Scotia indicate that presently available sedimentation models from locations such as the middle Atlantic or Texas coasts of the United States may only represent well-documented regional case studies. A true generalised coastal sedimentation model is required which can identify the parameters controlling vertical and horizontal translation of the depositional surface and provide relationships between these parameters which quantitatively predict the genesis, distribution and geometry of coastal sedimentary facies.

Marine Geology↗

USGS2013

Sedimentary history of the Tethyan margins of eastern Gondwana during the Mesozoic

A composite Mesozoic geological history for the Gondwana margins to the Eastern Tethys Ocean can be assembled from stratigraphic successions on the Australian and Himalayan margins and from drill sites of Ocean Drilling Program Legs 122 and 123. During the Triassic, this region drifted northwards, entering tropical paleolatitudes during the Late Triassic-Early Jurassic, then returned to mid-latitudes for the Middle Jurassic through Early Cretaceous. Shallow-water carbonates are restricted to the tropical-latitude interval; at other times, the margins are dominated by clastic deposition. Episodes of deltaic sandstone progradation over the shelves are caused by eustatic sealevel fluctuations, by wet climatic conditions within the source regions and by local tectonic activity. A major hiatus between Callovian shallow-water shelf deposits and Oxfordian deep-water sediments is an ubiquitous feature, which may be related to a widespread plate tectonic reorganization and the cascading effects of associated sealevel rise and elevated carbon dioxide levels. Off Northwest Australia, this Callovian/Oxfordian event also coincides with an episode of block faulting. Marginal sediments deposited during the Late Jurassic are mainly marine claystone containing abundant terrigenous organic matter. Shallow depths of carbonate compensation (CCD) during the Late Jurassic through Early Cretaceous prevented the preservation of carbonate over most of the Argo basin off Northwest Australia, and these deep-sea sediments consist mainly of condensed, oxygenated radiolarian-rich claystone. During the late Kimmeridgian-early Tithonian, a downward excursion in the CCD enabled limited preservation of some larger nannofossils and mollusc fragments within the pelagic deposits, a feature also recorded in coeval deposits in the Atlantic. Explosive volcanism accompanied the final stages of rifting between India and Australia during the late Berriasian and Valanginian, producing volcaniclastic debris washing into the deltas and widespread ash deposits. The late Barremian and Aptian sediments indicate a rise in the CCD, accompanied by warming of the region and an increased delivery of organic-rich claystone into the basins.

Book chapter↗

USGS1969

Results of geological and geochemical investigations in an area northwest of the Chulitna River, central Alaska Range

Sedimentary and volcanic rock units of Paleozoic and Mesozoic age, faults, and elongate bodies of intrusive rock, particularly serpentinites, have a dominant northeasterly trend in an area northwest of the Chulitna River between Eldridge Glacier and Bull River. The serpentinites locally contain abnormal (as much as 0.5 percent) concentrations of nickel, have one newly identified occurrence of chromite, and are hosts to small epigenetic lodes containing copper, gold, and silver. Other epigenetic concentrations of copper or other metals occur in interlayered basalt and limestone at Partin and Canyon Creeks in the southwestern part of the area and in porphyry near Costello Creek in the northern part of the area. Tin occurs in greisen on upper Ohio Creek, and abnormal concentrations of tin also characterize mineralized rocks along Canyon Creek and at a prospect near Long Creek. Mineralized rocks characterized by silver, lead, and zinc crop out near Lookout Mountain. Anomalous concentrations of gold and other metals occur in stream sediments at isolated sites in upper Long Creek and at Coal Creek, as well as in several areas near known lode mineral occurrences. Shotgun and McCallie Creeks both contain stream sediments with anomalous concentrations of metals and both head into the basalt-limestone unit which is the host rock at Partin and Canyon Creeks; these facts suggest that other concentrations may be found.

Circular↗

USGS2002

Report for borehole explosion data acquired in the 1999 Los Angeles Region Seismic Experiment (LARSE II), southern California: Part II, data tables and plots

The Los Angeles Region Seismic Experiment (LARSE), a joint project of the U.S. Geological Survey (USGS) and the Southern California Earthquake Center (SCEC), was conducted to produce seismic images of the subsurface in the Los Angeles region. Primary targets were major fault systems and sedimentary basins; the goal of the project was to address the earthquake hazard posed by these geologic features. The first phase of data collection (LARSE 1) was completed in 1994; the second phase (LARSE 2) was completed in 1999. A description of the 1999 survey and an overview of both phase I and II is given in Fuis and others (2001). In this report, we present the technical details for the explosion data collected in 1999.

California↗

USGS2022

Geologic map of MTM −10022 and −15022 quadrangles, Morava Valles and Margaritifer basin, Mars

The landscape in Mars Transverse Mercator (MTM) −10022 and −15022 quadrangles (lat −7.5° N. to −17.5° N. between long 335° E. and 340° E.) in Margaritifer Terra preserves a record of sedimentary and alluvial deposits, volcanic and tectonic structures, and erosional landforms that record a long and complex geologic and geomorphic history. MTM −10022 and −15022 quadrangles primarily encompass Morava Valles, the terminus of the Samara-Himera and Paraná-Loire valley networks, the broad catchment informally named Margaritifer basin, and Margaritifer Chaos. Morava Valles is the lowermost reach of the northward draining mesoscale outflow system that consists of Uzboi Vallis, Ladon Valles, and Morava Valles, was sourced from flow out of Argyre basin, and incises across and between the ancient Ladon and Holden impact basins. The broad-scale topography and surface relief within the map, including the topographic low occupied by Margaritifer basin, were largely shaped during the Noachian by the formation of the Holden, Ladon, and Ares impact basins and the Chryse trough. Multiple processes modified the ancient surface until the Late Noachian and resulted in the formation of the terra unit that forms the widely exposed surface. Later resurfacing associated with likely sedimentary and volcanic processes modified predominantly lower elevation surfaces and basins during the Late Noachian into at least the Hesperian. Sedimentary processes during the Late Noachian were dominated by fluvial incision of the Samara-Himera and Paraná-Loire valley networks and discharge related to the dissection of Morava Valles that drained Ladon basin. The history of geomorphic activity within Margaritifer basin was more complex and was likely dominated by the evolution of Morava Valles relative to the formation of the valley networks. The floor of Margaritifer basin preserves likely lacustrine plains related to sedimentation in water ponded during early discharge from Morava Valles, which were later embayed by volcanic plains. Crater densities and cross-cutting relations indicate Margaritifer basin evolved over a relatively short period of geologic time. The timing of the last drainage out of Morava Valles is not well constrained but could have occurred during the Hesperian. Structural collapse and the formation of the Margaritifer Chaos and other chaotic terrain formed by the release of subsurface water that may have been related to volcanic activity along the southern margin of Margaritifer basin. Final geomorphic events within the map region include the formation of Late Hesperian to perhaps Amazonian alluvial fans within some craters and isolated mass wasting on steep slopes. A final, variable veneer associated with locally occurring impacts and redistribution of fine-grained material by eolian processes resulted in the landscape observed today.

Scientific Investigations Map↗

USGS2014

Sea-floor morphology and sedimentary environments of western Block Island Sound, northeast of Gardiners Island, New York

Multibeam-echosounder data, collected during survey H12299 by the National Oceanic and Atmospheric Administration in a 162-square-kilometer area of Block Island Sound, northeast of Gardiners Island, New York, are used along with sediment samples and bottom photography, collected at 37 stations in this area by the U.S. Geological Survey during cruise 2013-005-FA, to interpret sea-floor features and sedimentary environments. These data and interpretations provide important base maps for future studies of the sea floor, focused, for example, on benthic ecology and resource management. The features and sedimentary environments on the sea floor are products of the glacial history and modern tidal regime. Features include bedforms such as sand waves and megaripples, boulders, a large current-scoured depression, exposed glaciolacustrine sediments, and areas of modern marine sediment. Sand covers much of the study area and is often in the form of sand waves and megaripples, which indicate environments characterized by coarse-grained bedload transport. Boulders and gravelly lag deposits, which indicate environments of erosion or nondeposition, are found off the coast of Gardiners Island and on bathymetric highs, probably marking areas where deposits associated with recessional ice-front positions, the northern flank of the terminal moraine, or coastal-plain sediments covered with basal till are exposed. Bottom photographs and video of boulders show that they are commonly covered with sessile fauna. Strong tidal currents have produced the deep scour depression along the northwestern edge of the study area. The eastern side of this depression is armored with a gravel lag. Sea-floor areas characterized by modern marine sediments appear featureless at the 2-meter resolution of the bathymetry and flat to current rippled in the photography. These modern environments are indicative of sediment sorting and reworking.

New York↗

USGS1997

Effect of faulting on ground-water movement in the Death Valley Region, Nevada and California

This study characterizes the hydrogeologic system of the Death Valley region, an area covering approximately 100,000 square kilometers. The study also characterizes the effects of faults on ground-water movement in the Death Valley region by synthesizing crustal stress, fracture mechanics, and structural geologic data. The geologic conditions are typical of the Basin and Range Province; a variety of sedimentary and igneous intrusive and extrusive rocks have been subjected to both compressional and extensional deformation. Faulting and associated fracturing is pervasive and greatly affects ground-water flow patterns. Faults may become preferred conduits or barriers to flow depending on whether they are in relative tension, compression, or shear and other factors such as the degree of dislocations of geologic units caused by faulting, the rock types involved, the fault zone materials, and the depth below the surface. The current crustal stress field was combined with fault orientations to predict potential effects of faults on the regional groundwater flow regime. Numerous examples of faultcontrolled ground-water flow exist within the study area. Hydrologic data provided an independent method for checking some of the assumptions concerning preferential flow paths.

California, Nevada↗

USGS2018

Fish Lake limnology and watershed aqueous geochemistry, Fish Lake Plateau, Utah

Fish Lake is located at 2696 m elevation on the Fish Lake Plateau with a bedrock geology of Oligocene to Pliocene age volcanics and Cretaceous to Eocene age sedimentary rocks. Lake bathymetry indicates a maximum depth of ~27 m and volume of 2.31 x 108 m3. The lake is dimictic with summer water column temperature declines of 13˚C between 7 to 15 m depth, whereas in spring and fall water column is isothermal. Numerous surface streams flow into the lake and there is one surface outflow stream, Lake Creek, which drains to the northeast into Johnson Valley Reservoir and the Fremont River, which is a tributary of the upper Colorado River. Surface inflow streams and spring waters are generally dilute and ionic compositions are consistent with bedrock geology. Spring and creek water oxygen and hydrogen stable isotope compositions indicate snowmelt is the predominant water source to the lake. High evaporative enrichment is indicated by lake water stable oxygen and hydrogen compositions and conservative ions, which suggest evaporative water loss equal or greater than inflow. The ionic and isotope data combined with preliminary discharge measurements provide a preliminary estimated lake-water residence time between approximately 15 and 30 years, although groundwater flux is currently unknown. Dissolved silica concentrations decline by two orders of magnitude between inflowing waters and summer lake waters, indicating substantial uptake by freshwater diatoms and high biological productivity. During summer, epilimnion pH values of 8.7 contribute to slight oversaturation with respect to calcite/aragonite, which suggests that precipitates could form in minor concentration. Below the thermocline pH is near neutral and carbonate mineral dissolution within the water column is likely.

Utah↗

USGS2021

3-D Modeling of the Duluth Complex from geophysical data

The Mesoproterozoic Duluth Complex in northeastern Minnesota is one of the major plutonic components of the Midcontinent Rift System and hosts a variety of copper-nickel sulfide and platinum-group element deposits. The Duluth Complex is composed of a series of individual mafic and felsic intrusions emplaced 1110-1098 Ma within Paleoproterozoic sedimentary rocks of the Animikie basin and volcanic flows of the Midcontinent Rift. Prior work has included 2-D modeling and qualitative geologic interpretations of gravity and magnetic data (e.g., Chandler, 1990; Chandler and Ferderer, 1989), much of which is still preliminary (V. Chandler, written commun., 2020). Three-dimensional modeling has been limited, with only one 3-D model created using Bouguer gravity data constrained by seismic-reflection interpretations as part of a PhD thesis (Allen, 1994). Given the complex geology of the area, 3-D modeling is useful for providing a complete picture of the variable densities, susceptibilities, and electrical resistivities throughout the Duluth Complex and associated volcanic rocks as well as their depth extent beneath sedimentary cover. Models of these geophysical properties at depth enable more accurate geologic mapping in the subsurface which can lead to an improved understanding of the formation history of the Duluth Complex. In this study, we use aeromagnetic data acquired between 1979-1991 (Chandler, 2007), Bouguer gravity data collected since 1950 (Chandler and Lively, 2019), and magnetotelluric data collected in 2019 to create new 2-D and 3-D geophysical models of the Duluth Complex constrained by seismic reflection, geologic, and rock property data. An inversion of the Bouguer gravity data for thickness of the Duluth Complex using constant densities of 3110 kg/m3 and 2670 kg/m3 for the Duluth Complex and surrounding crustal rocks, respectively, results in thicknesses ranging from ~3-28 km for the Duluth Complex and related intrusions and volcanic rocks (Figure 1A). A 3-D model of the magnetotelluric data reveals low resistivity anomalies at ~5-10 km depth below the northern margin of the Duluth Complex and below the Greenwood Lake intrusion (Figure 1B). We expect to encounter low resistivities at depth associated with the Paleoproterozoic Animikie basin, which makes up the floor of the Duluth Complex, and therefore interpret these anomalies as either the base of the complex or as fragments of Animikie sediments interfingered with igneous intrusive rocks. Finally, 3-D voxel models of density and susceptibility illuminate the subsurface distribution of rock properties below the Duluth Complex which, in combination with resistivity and thickness models, can be used to create a 3-D geologic map of this area.

Minnesota↗

USGS2016

Geologic and geophysical models for Osage County, Oklahoma, with implications for groundwater resources

This report summarizes a three-dimensional (3-D) geologic model that was constructed to provide a framework to investigate groundwater resources of the Osage Nation in northeastern Oklahoma. This report also presents an analysis of an airborne electromagnetic (AEM) survey that assessed the spatial variation of electrical resistivity to depths as great as 300 meters in the subsurface. The report and model provide support for a countywide assessment of groundwater resources, emphasizing the Upper Pennsylvanian rock units in the shallow subsurface of central and eastern Osage County having electrical resistivity properties that may indicate aquifers. Surface outcrops and subsurface stratigraphic picks on wire-line geophysical logs of Upper Pennsylvanian–Lower Permian sedimentary rock were used to construct a 3-D model of the geologic subsurface as an aid for evaluating groundwater resources in Osage County. Quaternary alluvium and terraces along major streams and the Arkansas River are included in the geologic framework model. Data from the AEM survey were subjected to quality-control procedures, truncated at depth of investigation (DOI), and then used to build a 3-D electrical resistivity model making use of secondary and tertiary interpolation profiles between primary data profiles. The AEM data highlight westward-inclined resistivity gradients that parallel the shallow dip of bedrock strata; bodies have resistivity >30 ohm-meters, and extend as much as 10 kilometers (km) down the dip of host geologic units. Volume analysis and internal imaging of an integrated 3-D geology and electrical resistivity model give a proxy for likely aquifer units with large relative volumes of high resistivity: Quaternary alluvium, Elgin Sandstone Lentil in the upper part of the Vamoosa Group, Tallant Formation, and parts of a combined Wann-Iola-Chanute Formation. Less voluminous, high-resistivity bodies correspond to intervals in the lower part of the Vamoosa Group in the east-central part of the county and probable limestone intervals in the upper part of the Vanoss Group in the northwest part of the county. Northwestern and eastern troughs of potable water previously defined for central Osage County generally correspond to down-dip projections of high-resistivity bodies associated with the Elgin Sandstone Lentil of the Vamoosa Group and Tallant Formation, respectively.

Oklahoma↗