SEARCH · USGS Science

Results for “One Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21Linked to original sources

USGS2003

Chasing lava: a geologist's adventures at the Hawaiian Volcano Observatory

A lively account of the three years (1969-1972) spent by geologist Wendell Duffield working at the Hawaiian Volcano Observatory at Kilauea, one of the world's more active volcanoes. Abundantly illustrated in b&w and color, with line drawings and maps, as well. Volcanologists and general readers alike will enjoy author Wendell Duffield's report from Kilauea--home of Pele, the goddess of fire and volcanoes. Duffield's narrative encompasses everything from the scientific (his discovery that the movements of cooled lava on a lava lake mimic the movements of the earth's crust, providing an accessible model for understanding plate tectonics) to the humorous (his dog's discovery of a snake on the supposedly snake-free island) to the life-threatening (a colleague's plunge into molten lava). This charming account of living and working at Kilauea, one of the world's most active volcanoes, is sure to be a delight.

Hawai'i↗

USGS1974

A prototype global volcano surveillance system monitoring seismic activity and tilt

The Earth Resources Technology Satellite makes it feasible for the first time to monitor the level of activity at widely separated volcanoes and to relay these data almost instantancously to one central office. This capability opens a new era in volcanology where the hundreds of normally quiescent but potentially dangerous volcanoes near populated regions around the world can be economically and reliably monitored. A prototype global volcano surveillance system has been established beginning in the fall of 1972 with the help of local scientists on 15 volcanoes in Alaska, Hawaii, Washington, California, Iceland. Guatemala, El Salvador, and Nicaragua. Data on earthquake activity and ground tilt are received 6 to 10 times daily in Menlo Park, California, within 90 minutes of transmission from the sites. Seismic event counters were installed at 19 locations with biaxial borehole tiltineters with 1 microradian sensitivity installed at seven sites. Direct comparison of seismic events that are counted with records from nearby seismic stations show the event counters work quite reliably. An order of magnitude increase in seismic events was observed prior to the eruption of Volcán Fuego in Guatemala in February, 1973. Significant changes in tilt were observed on volcanoes Kilauea. Fuego, and Pacava. This study demonstrates the technological and economic feasibility of utilizing such a volcano surveillance system throughout the world.

Bulletin Volcanologique↗

USGS2013

Summary of the Third International Planetary Dunes Workshop: remote sensing and image analysis of planetary dunes

The Third International Planetary Dunes Workshop took place in Flagstaff, AZ, USA during June 12–15, 2012. This meeting brought together a diverse group of researchers to discuss recent advances in terrestrial and planetary research on aeolian bedforms. The workshop included two and a half days of oral and poster presentations, as well as one formal (and one informal) full-day field trip. Similar to its predecessors, the presented work provided new insight on the morphology, dynamics, composition, and origin of aeolian bedforms on Venus, Earth, Mars, and Titan, with some intriguing speculation about potential aeolian processes on Triton (a satellite of Neptune) and Pluto. Major advancements since the previous International Planetary Dunes Workshop include the introduction of several new data analysis and numerical tools and utilization of low-cost field instruments (most notably the time-lapse camera). Most presentations represented advancement towards research priorities identified in both of the prior two workshops, although some previously recommended research approaches were not discussed. In addition, this workshop provided a forum for participants to discuss the uncertain future of the Planetary Aeolian Laboratory; subsequent actions taken as a result of the decisions made during the workshop may lead to an expansion of funding opportunities to use the facilities, as well as other improvements. The interactions during this workshop contributed to the success of the Third International Planetary Dunes Workshop, further developing our understanding of aeolian processes on the aeolian worlds of the Solar System.

Aeolian Research↗

USGS2021

Numerical simulations of the geospace response to the arrival of an idealized perfect interplanetary coronal mass ejection

Previously, Tsurutani and Lakhina (2014, https://doi.org/10.1002/2013GL058825 ) created estimates for a “perfect” interplanetary coronal mass ejection and performed simple calculations for the response of geospace, including . In this study, these estimates are used to drive a coupled magnetohydrodynamic-ring current-ionosphere model of geospace to obtain more physically accurate estimates of the geospace response to such an event. The sudden impulse phase is examined and compared to the estimations of Tsurutani and Lakhina (2014, https://doi.org/10.1002/2013GL058825 ). The physics-based simulation yields similar estimates for Dst rise, magnetopause compression, and equatorial values as the previous study. However, results diverge away from the equator. values in excess of 30 nT/s are found as low as magnetic latitude. Under southward interplanetary magnetic field conditions, magnetopause erosion combines with strong region one Birkeland currents to intensify the response. Values obtained here surpass those found in historically recorded events and set the upper threshold of extreme geomagnetically induced current activity at Earth.

Space Weather↗

USGS1982

Mineral resource potential map of the Savannah Roadless Area, Liberty County, Florida

The Savannah Roadless Area is underlain by sedimentary rocks having low potential for oil and gas and minerals. The low potential for oil or gas notwithstanding, the possibilities for discovery cannot be ruled out because the area and nearby lands have not been thoroughly explored. No minerals have been mined within the Savannah Roadless Area, and the only production nearby has been the digging of clayey sand used in stabilizing U.S. Forest Service roads. Fuller's earth, quartz sand and gravel, clayey sand, and common clay presently are produced elsewhere in the region, and limestone and peat have been produced in the past. No clay suitable for structural clay products or fuller's earth is present in the roadless area; however, a bed of quartz sand and gravel of excellent quality was penetrated at a depth interval of 37-50 ft by one drill hole. Although this bed is coarser grained-and therefore is more suitable for many uses-than the sand deposits worked elsewhere in the Big Bend region, its mineral resource potential is reduced by the thickness of overburden above it and by its distance from markets in population centers. The Apalachicola National Forest has been explored for phosphate and reconnoitered for heavy minerals, but no valuable deposits of either have been found.

Florida↗

USGS1989

A computer program for converting rectangular coordinates to latitude-longitude coordinates

A computer program was developed for converting the coordinates of any rectangular grid on a map to coordinates on a grid that is parallel to lines of equal latitude and longitude. Using this program in conjunction with groundwater flow models, the user can extract data and results from models with varying grid orientations and place these data into grid structure that is oriented parallel to lines of equal latitude and longitude. All cells in the rectangular grid must have equal dimensions, and all cells in the latitude-longitude grid measure one minute by one minute. This program is applicable if the map used shows lines of equal latitude as arcs and lines of equal longitude as straight lines and assumes that the Earth 's surface can be approximated as a sphere. The program user enters the row number , column number, and latitude and longitude of the midpoint of the cell for three test cells on the rectangular grid. The latitude and longitude of boundaries of the rectangular grid also are entered. By solving sets of simultaneous linear equations, the program calculates coefficients that are used for making the conversion. As an option in the program, the user may build a groundwater model file based on a grid that is parallel to lines of equal latitude and longitude. The program reads a data file based on the rectangular coordinates and automatically forms the new data file. (USGS)

Water-Resources Investigations Report↗

USGS1974

Analyses and economic potential of monazite in Liberia

Eleven monazite samples from Liberia, including seven from beach sands, were analyzed by the X-ray fluorescence method. The monazite samples, containing only one-half percent impurities, were obtained by use of a hot Clerici-solution procedure for purification which was devised by the author. The percentage of the rare-earth elements in Liberian monazite concentrates does not differ greatly from that of monazite sands elsewhere in the world. The average of the 11 samples shows less praseodymium and neodymium than Russian and American monazites, but more cerium. Liberian coastal sands apparently contain sufficient reserves of monazite (and other heavy minerals of commerce) to encourage mining. A feasibility study of production and marketing of monazite from Liberian beach sands is recommended.

Journal of Research of the U.S. Geological Survey↗

USGS1976

Helium detection as a guide for uranium exploration

Helium, a byproduct of radioactive decay, may prove to be a valuable indicator of the presence and distribution of uranium deposits. Recent technological advances permit the development of instrumentation not previously adapted for this purpose. Commercially available equipment can provide high sensitivity at low cost and allow reasonable mobility for field use. A truck-mounted mass-spectrometer, tuned for helium-4, permits immediate adjustment or modification of sampling patterns in response to accumulating data. The inlet system of the spectrometer has been designed to allow flexibility in gas analyses from various sample types--soil gas, atmosphere, or gases in water. Sensitivity of the instrument is better than 50 parts of helium per 10 9 parts of gas. Replicate samples and standards can be analyzed in only 3 minutes. Helium in soil gas is being used for the initial evaluation of the technique. A hollow probe, as much as 2 m long, is driven into the ground; and a 10-cc syringe is used to purge the probe and extract the gas. This sample is then injected into the inlet system and introduced into the spectrometer at constant pressure. The output signal is displayed on a chart recorder. Investigations can be performed on a qualitative, relative basis, or on a quantitative basis by comparison to calibrated helium standards. Preliminary field testing includes studies of the responses to variations in wind speed, temperature, barometric pressure, moisture, and sampling depth over extended time periods, as well as studies of geologic controls on the helium content in soil gas. Surveys over known uranium occurrences reveal some anomalous helium distributions. This report describes an updated technological approach to an old idea: that of using helium, a byproduct of uranium radioactive decay, as an exploration tool for uranium. Helium is the sixth most abundant gas found in the earth's atmosphere (Table 1). It is an inert gas and very mobile, mixing rapidly. When the alpha particles from the radioactive decay of uranium and thorium pick up two electrons, atoms of the isotope helium-4 are formed. Several helium-4 atoms are produced from each decay series of U-238, U-235, and Th-232 (fig. 1). The half-lives of the parent isotopes are5also shown in figure 1. One gram of uranium will produce ~10 5 atoms of helium-4 per second, and one gram of thorium produces ~2.5 x 10 4 atoms of helium-4 per second (fig. 2). Calculations of the helium produced from the crust and mantle reveal that 1,125 x 10 30 atoms per year are produced, but only 7 x 10 30 atoms per year escape from the earth (Damon and Kulp, 1958). More is being produced than is being lost; in fact, the total atmospheric content of helium could be produced in only 2 million years (MacDonald, 1963)! However, all the crustal and mantle helium-4 does not degas into the atmosphere as it is formed. It is trapped in crystal lattices and in pore spaces within the earth. What this means is that there is excess helium-4 in the earth--excess, that is, compared to the atmospheric concentration in equilibrium with the helium-4 escape rate into space and the helium-4 flux from the crust and mantle (Nicolet, 1957). Near-surface pockets of high helium-4 concentrations are known, and some natural gas fields are so enriched that they are the source for commercial production of helium. Work by Roberts and others (1975) has shown high helium concentration in the soil gas associated with geothermal areas; and work by Clark and Kugler (1973), Dyck (1975), and Goldak (1974), for example, has noted high helium concentrations in soils and waters in the vicinity of uranium deposits. These latter studies certainly indicate the potential of helium detection for use as an exploration tool for uranium.

Open-File Report↗

USGS1987

On the interpretation of the geomagnetic energy spectrum

Two recent high-degree magnetic energy spectra, based mostly on MAGSAT data, are compared and found to agree very well out to order and degree n = 15, but the spectrum remains somewhat uncertain for higher degrees. The hypothesis that a primary break in the slope of the spectrum, plotted semi-logarithmically, is due to a transition from dominance by core sources to dominance by crustal magnetization is tested. Simple arrays of dipoles and current loops are found whose combined fields fit the spectrum. Two distinctly different ranges of source depth are found to be adequate. Because one range is shallow and the other deep, the hypothesis is supported. ?? 1987.

Physics of the Earth and Planetary Interiors↗

USGS2007

Petrology and tectonics of Phanerozoic continent formation: From island arcs to accretion and continental arc magmatism

Mesozoic continental arcs in the North American Cordillera were examined here to establish a baseline model for Phanerozoic continent formation. We combine new trace-element data on lower crustal xenoliths from the Mesozoic Sierra Nevada Batholith with an extensive grid-based geochemical map of the Peninsular Ranges Batholith, the southern equivalent of the Sierras. Collectively, these observations give a three-dimensional view of the crust, which permits the petrogenesis and tectonics of Phanerozoic crust formation to be linked in space and time. Subduction of the Farallon plate beneath North America during the Triassic to early Cretaceous was characterized by trench retreat and slab rollback because old and cold oceanic lithosphere was being subducted. This generated an extensional subduction zone, which created fringing island arcs just off the Paleozoic continental margin. However, as the age of the Farallon plate at the time of subduction decreased, the extensional environment waned, allowing the fringing island arc to accrete onto the continental margin. With continued subduction, a continental arc was born and a progressively more compressional environment developed as the age of subducting slab continued to young. Refinement into a felsic crust occurred after accretion, that is, during the continental arc stage, wherein a thickened crustal and lithospheric column permitted a longer differentiation column. New basaltic arc magmas underplate and intrude the accreted terrane, suture, and former continental margin. Interaction of these basaltic magmas with pre-existing crust and lithospheric mantle created garnet pyroxenitic mafic cumulates by fractional crystallization at depth as well as gabbroic and garnet pyroxenitic restites at shallower levels by melting of pre-existing lower crust. The complementary felsic plutons formed by these deep-seated differentiation processes rose into the upper crust, stitching together the accreted terrane, suture and former continental margin. The mafic cumulates and restites, owing to their high densities, eventually foundered into the mantle, leaving behind a more felsic crust. Our grid-based sampling allows us to estimate an unbiased average upper crustal composition for the Peninsular Ranges Batholith. Major and trace-element compositions are very similar to global continental crust averaged over space and time, but in detail, the Peninsular Ranges are slightly lower in compatible to mildly incompatible elements, MgO, Mg#, V, Sc, Co, and Cr. The compositional similarities suggest a strong arc component in global continental crust, but the slight discrepancies suggest that additional crust formation processes are also important in continent formation as a whole. Finally, the delaminated Sierran garnet pyroxenites have some of the lowest U/Pb ratios ever measured for silicate rocks. Such material, if recycled and stored in the deep mantle, would generate a reservoir with very unradiogenic Pb, providing one solution to the global Pb isotope paradox.

Earth and Planetary Science Letters↗

USGS2008

Exponential decline of aftershocks of the M7.9 1868 great Kau earthquake, Hawaii, through the 20th century

The remarkable catalog of Hawaiian earthquakes going back to the 1820s is based on missionary diaries, newspaper accounts, and instrumental records and spans the great M 7.9 Kau earthquake of April 1868 and its aftershock sequence. The earthquake record since 1868 defines a smooth curve complete to M 5.2 of the declining rate into the 21st century, after five short volcanic swarms are removed. A single aftershock curve fits the earthquake record, even with numerous M 6 and 7 main shocks and eruptions. The timing of some moderate earthquakes may be controlled by magmatic stresses, but their overall long‐term rate reflects one of aftershocks of the Kau earthquake. The 1868 earthquake is, therefore, the largest and most controlling stress event in the 19th and 20th centuries. We fit both the modified Omori (power law) and stretched exponential (SE) functions to the earthquakes. We found that the modified Omori law is a good fit to the M ≥ 5.2 earthquake rate for the first 10 years or so and the more rapidly declining SE function fits better thereafter, as supported by three statistical tests. The switch to exponential decay suggests that a possible change in aftershock physics may occur from rate and state fault friction, with no change in the stress rate, to viscoelastic stress relaxation. The 61‐year exponential decay constant is at the upper end of the range of geodetic relaxation times seen after other global earthquakes. Modeling deformation in Hawaii is beyond the scope of this paper, but a simple interpretation of the decay suggests an effective viscosity of 10 19 to 10 20 Pa s pertains in the volcanic spreading of Hawaii's flanks. The rapid decline in earthquake rate poses questions for seismic hazard estimates in an area that is cited as one of the most hazardous in the United States.

Hawaii↗

USGS1970

The airborne infrared scanner as a geophysical research tool

The infrared scanner is proving to be an effective anomaly-mapping tool, albeit one which depicts surface emission directly and heat mass transfer from depths only indirectly and at a threshold level 50 to 100 times the normal conductive heat flow of the earth. Moreover, successive terrain observations are affected by time-dependent variables such as the diurnal and seasonal warming and cooling cycle of a point on the earth's surface. In planning precise air borne surveys of radiant flux from the earth's surface, account must be taken of background noise created by variations in micrometeorological factors and emissivity of surface materials, as well as the diurnal temperature cycle. The effect of the diurnal cycle may be minimized by planning predawn aerial surveys. In fact, the diurnal change is very small for most water bodies and the emissivity factor for water (e) =~ 1 so a minimum background noise is characteristic of scanner records of calm water surfaces.

Optical Spectra↗

USGS2006

Simple equations guide high-frequency surface-wave investigation techniques

We discuss five useful equations related to high-frequency surface-wave techniques and their implications in practice. These equations are theoretical results from published literature regarding source selection, data-acquisition parameters, resolution of a dispersion curve image in the frequency-velocity domain, and the cut-off frequency of high modes. The first equation suggests Rayleigh waves appear in the shortest offset when a source is located on the ground surface, which supports our observations that surface impact sources are the best source for surface-wave techniques. The second and third equations, based on the layered earth model, reveal a relationship between the optimal nearest offset in Rayleigh-wave data acquisition and seismic setting - the observed maximum and minimum phase velocities, and the maximum wavelength. Comparison among data acquired with different offsets at one test site confirms the better data were acquired with the suggested optimal nearest offset. The fourth equation illustrates that resolution of a dispersion curve image at a given frequency is directly proportional to the product of a length of a geophone array and the frequency. We used real-world data to verify the fourth equation. The last equation shows that the cut-off frequency of high modes of Love waves for a two-layer model is determined by shear-wave velocities and the thickness of the top layer. We applied this equation to Rayleigh waves and multi-layer models with the average velocity and obtained encouraging results. This equation not only endows with a criterion to distinguish high modes from numerical artifacts but also provides a straightforward means to resolve the depth to the half space of a layered earth model. ?? 2005 Elsevier Ltd. All rights reserved.

Soil Dynamics and Earthquake Engineering↗

USGS2022

Science mission requirements for a globally ranging, riserless drilling vessel for U.S. Scientific Ocean Drilling

Through the collection and analysis of shallow and deep subseafloor sediments, rocks, fluids, and life, scientific ocean drilling has enriched our understanding of the complex Earth system. Among other achievements, scientific ocean drilling has documented the history of Earth’s climate, the waxing and waning of polar ice sheets, the past changes in ocean and atmospheric circulation, the existence and function of microbial life in the subseafloor, the compositional variations in Earth’s crust and underlying mantle, and the physical and chemical processes acting at subduction zones, including those associated with tsunamigenic earthquakes. Over the decades, more than 12,000 articles that depend on analyses of scientific ocean drilling samples and geophysical data have been published, many detailing breakthrough contributions to global knowledge about the Earth system. Approximately 45% of these publications were led by U.S.-affiliated authors (International Ocean Discovery Program Publication Services, 2021). Since the mid-1980s, the workhorse of this multidisciplinary, international research effort has been the riserless D/V JOIDES Resolution, operated by Texas A&M University with funding from the U.S. National Science Foundation (NSF). D/V JOIDES Resolution has conducted the vast majority of scientific ocean drilling expeditions and collected most of the scientific cores over that period, including 82% of the expeditions and 93% of the cores in the last decade alone, despite being one of three platforms that is operated within the International Ocean Discovery Program. However, D/V JOIDES Resolution is approaching the end of its useful life. With a strong commitment to continue scientific ocean drilling beyond the end of the current phase, the community developed a document outlining the research frontiers that should be pursued. Exploring Earth by Scientific Ocean Drilling: 2050 Science Framework (Koppers and Coggon, 2020) describes seven scientific strategic objectives that focus on understanding interconnections within the Earth system and five flagship initiatives that integrate these objectives into long-term research efforts that address issues facing society. Additional elements in the 2050 Science Framework, including STEM education, workforce development, technology development, and innovative applications of data analytics, will advance the goals of scientific ocean drilling. Addressing the 2050 Science Framework also requires building partnerships with allied U.S. and international science programs and strengthening existing ones. To implement a significant portion of the 2050 Science Framework, the U.S. scientific community seeks to lease or acquire a newly built, globally ranging, state-of-the art, riserless drilling vessel. The many and varied technical and human resources requirements for successful accomplishment of scientific and educational goals summarized in this document and described in detail in the 2050 Science Framework require broad community input and careful consideration. Following receipt of NSF’s formal Request for Assistance to the United States Science Support Program (USSSP), the U.S. scientific ocean drilling community conducted a one-year exercise to identify its national scientific needs and priorities in order to determine the Science Mission Requirements (SMRs) presented here. This community effort included: (1) a U.S. community-wide survey to identify the specific operational and technical capabilities critical to addressing science in the 2050 Science Framework; (2) a series of online workshops focusing on critical capabilities identified by the survey; and (3) a large in-person workshop to synthesize the results of the survey and the virtual workshops (Appendix 1). The approach was designed to reach as many participants as possible. Overall, 278 survey responses were received from U.S. community members, representing 104 unique institutions from 39 states and the District of Columbia, and 137 unique individuals participated in the workshops (Appendix 2). The results of this effort comprise two classes of SMRs: Foundational Science Mission Requirements and Primary Science Mission Requirements. Foundational SMRs define minimum criteria for a new riserless drilling vessel that can address significant portions of the 2050 Science Framework. Primary SMRs build upon the Foundational SMRs and will create more robust science opportunities and data collection capabilities, will increase progress in addressing the 2050 Science Framework objectives, and will provide more real-time ship-to-shore interaction to improve science productivity, engagement, and outreach. Modern safety and environmental standards, including meeting standards to access protected waters such as exclusive economic zones, extended continental shelves, or high latitudes, while being cognizant of the vessel’s environmental footprint. Safe and efficient operations in global locations and in water depths from 70 m to 6000+ m, with total drill string length of at least 7000 m. High-quality core and data collection from a range of key subseafloor environments. Advanced heave compensation, dynamic positioning, and drill pipe stability. Modern mud and cement/casing systems. Critical onboard measurements for safety, operational decision-making, documentation of ephemeral properties, mission-specific science, and long-term science goals that extend beyond a single expedition. Designated and appropriate space for sample and data preservation. Highly skilled onboard personnel, including technical staff for curation and core handling; support for safety, time-sensitive, and critical shipboard measurements; computer support; equipment and instrument repair; application support; and data assurance. Primary Science Mission Requirements include: Flexible shipboard space for laboratories and on deck to ensure safe, successful implementation of diverse science objectives and operations. Minimizing contamination of recovered samples. Over-the-side capabilities for science-supporting technology (e.g., remotely operated vehicles, water- column sampling, sediment-water interface sampling). Downhole logging and measurements. Expanded borehole observatory capabilities. Reliable and consistent ship-to-shore communications. NSF’s investment in a new globally ranging, riserless drilling vessel will have a powerful economic multiplier effect, including the infusion of additional science support funds in the United States for training and research, the development of new technologies and tools, and the associated scientific and technical workforce development. The skills and knowledge gained through scientific ocean drilling are translatable to careers in fields such as sustainable energy development (e.g., geothermal and offshore wind), carbon sequestration, data management and cyberinfrastructure, biotechnology, communications, science education, policy, hazard mitigation, and environmental management. The United States is a leader in a well-established and internationally collaborative scientific ocean drilling community. A modern, globally ranging, riserless drilling vessel will allow the United States to expand its leadership position, address broad scientific questions that current capabilities preclude, and cultivate equitable international, multidisciplinary collaborations that will ensure scientific ocean drilling’s future success.

Report↗

USGS2018

Hydrogeophysics at societally relevant scales: Airborne electromagnetic applications and model structural uncertainty quantification

There is a critical and growing need for information about subsurface geological properties and processes over sufficiently large areas that can inform key scientific and societal studies. Airborne geophysical methods fill a unique role in Earth observation because of their ability to detect deep subsurface properties at regional scales and with high spatial resolution that cannot be achieved with groundbased measurements. Airborne electromagnetics, or AEM, is one technique that is rapidly emerging as a foundational tool for geological mapping, with widespread application to studies of water and mineral resources, geologic hazards, infrastructure, the cryosphere, and the environment. Applications of AEM are growing worldwide, with rapid developments in instrumentation and data analysis software. In this study, we summarize several recent hydrogeophysical applications of AEM, including examples drawn from a recent survey in the Mississippi Alluvial Plain (MAP). In addition, we discuss developments in computational methods for geophysical and geological model structural uncertainty quantification using AEM data, and how these results are used in a sequential hydrogeophysical approach to characterize hydrologic parameters and prediction uncertainty.

Conference Paper↗

USGS2016

Landsat helps bolster food security

One of the cruelest, most complex narratives in the world today (2019) is written in the hunger of sub-Saharan Africa. When famine is the only yield from the scorched Earth, survival often depends on a heart-rending calculation—how far is the distant feeding center and how close is the nearest well?

Fact Sheet↗

USGS2022

Presented abstracts from the U.S. Geological Survey 2020 Rocky Mountain Region Science Exchange (September 15–17, 2020)

The U.S. Geological Survey Rocky Mountain Region hosted scientists, managers, program coordinators, and leadership team members for a virtual Science Exchange during September 15–17, 2020. The Science Exchange had 216 registered participants and included 48 talks over the 3-day period. Invited speakers presented information about the novel U.S. Geological Survey Earth Monitoring, Analysis, and Prediction (EarthMAP) concept. Scientists showcased their research and participated in discussions related to the EarthMAP concept and EarthMAP applications. In addition, the Colorado River Basin Pilot Project, one of the first EarthMAP Pilot Projects, was unveiled during the Science Exchange. This report provides synopses of session objectives and corresponding abstracts that were presented along with author affiliations and email address of the lead author. In addition, web links are provided for related programs and projects, and associated publications are referenced.

Open-File Report↗

USGS1994

Membrane-micelle model for humus in soils and sediments and its relation to humification

Humification, the process whereby biomass consisting of dead plant and animal remains is converted into soil organic matter (humus), is one of the basic processes of the carbon cycle. The organic compounds that make up plant and animal tissue are thermodynamically unstable in the oxidizing atmosphere at the surface of the Earth. After the organisms in which they are incorporated die, the compounds are converted back to carbon dioxide and water by degradation reactions catalyzed by enzymes secreted by micro-organisms. However, not all the organic compounds in the dead biomass are immediately converted; some of the material is only partially oxidized. The residue left after partial oxidative degradation of the dead biomass is the source of the organic compounds that accumulate in soils and sediments as humus. Previously, humification was thought to involve a conversion of degradation products by a series of polymerization reactions into new types of polymeric species that are different from the precursor molecular species in the original biomass. However, it is proposed here that the depolymerization and oxidation reactions that take place during the enzymatic degradation of biopolymers produce amphiphiles--molecules that have a polar (hydrophilic) part and a nonpolar (hydrophobic) part. These amphiphiles that result from the partial oxidative degradation of dead biomass assemble spontaneously into ordered aggregates in which the hydrophobic parts of the molecules form the interiors and the hydrophilic parts of the molecules make up the exterior surfaces of the aggregates. These ordered aggregates constitute the humus in soils and sediments. Humus ordered aggregates most likely exist as bilayer membranes coating mineral grains and as micelles in solution.

Water Supply Paper↗